Publications

Chandrasekaran, S., Das, A.K. Response Control of Offshore Semi-Submersible with Passive Dampers. Int J Steel Struct (2026). https://doi.org/10.1007/s13296-026-01062-x
Pratibha Bhoi, Ganeswar Nath and J P Panda, “Nano material enhanced mathematical modelling on heat transfer analysis for thermal energy systems”, Advances in Natural Sciences: Nanoscience and Nanotechnology, Vol.17, 2026. DOI: https://doi.org/10.1088/2043-6262/ae8909
Chapala Sahoo,, Bigyan Ranjan Rout,, J.P. Panda and Kharabela Swain, “Effects of Radiation and Chemical Reaction on MHD Casson fluid flow through a Porous medium”, Suranaree J. Sci. Technol. Vol. 33(2):030385, pp.1-12,2026, DOI: https://doi.org/10.55766/sujst8225
S K Patta, J.P. Panda, A Agrawal, “Analytical Investigation of Soret Effect and Chemical Reaction On MHD Flow with Heat Transfer Past A Vertical Porous Plate"Songklanakarin Journal of Science and Technology, Accepted 12.03.2026.
L. Panigrahi, J.P. Panda, S Rao Nijam and G.C. Dash, “Exploring MHD free convection in a vertical channel: Analytical and Numerical solutions for Oldroyd-B fluids and temperature driven walls”, Journal of Applied Nonlinear Dynamics, Vol. 15(4) pp. 805—826, 2026, DOI:10.5890/JAND.2026.12.003
BarsaraniSahu, J.P.Panda and Arjun Agrawal,“ Investigation of Diffusion‐Thermal effect on bioconvective induced magnetic radiative Casson fluid flow with multiple slip”,HeatTransfer,Vol.55,Issue 6, pp.3746–3756, 2026 , DOI:https://doi.org/10.1002/htj.70283
Ilyas Khan, Lipika Panigrahi and J.P. Panda,“Entropy generation in unsteady stagnation flow, through porous media in the presence of a high magnetic Reynolds number with a uniform heat source: renewable energy applications”,Waves in Random and Complex Media,Vol.36(3), pp.4271-4294, 2026, DOI: 10.1080/17455030.2023.2187235
L. Panigrahi, J.P. Panda, S S Sahoo, Numerical Investigation of Diffusion‐Thermal Effect on Bioconvective Induced Magnetic Radiative Casson Fluid flow With Multiple Slip, Heat Transfer, Vol.55,Issue 6, pp.3832–3845, 2026. DOI: https://doi.org/10.1002/htj.70289
Mohapatra, D. R., Nanda, A, Sridhar, B., Panigrahi, S. K. (2026): Critical ferrochrome slag fine aggregate replacement level estimation in a GGBFS-fly ash blended precursor-based self-compacting geopolymer concrete, Journal of Sustainable Metallurgy (ISSN: 2199-3831), Springer, SCIE, Q1, IF: 3.5, https://doi.org/10.1007/s40831-026-01593-x
S. D. Das, S. Kumar, Gyan Ranjan Biswal, and T. Islam, “Condition Monitoring of Sulphur Hexafluoride Gas Insulated Switchgear Vessel using Smart Ultrasonic Sensor,” IEEE Transactions on Instrumentation and Measurement, Vol. 75, Art. 9701608, Mar. 2026. DOI: 10.1109/TIM.2026.367425 (IF: 5.9)
Das, P. P., Padhiari, S., & Das, S. R. (2026). Experimental investigation and optimization of technological performance characteristics in 3D printing of ABS/PC composite polymer. Journal of Thermoplastic Composite Materials. Advance online publication.
Mishra, S., Sahu, S. K., & Das, S. R. (2026). Comparative performance evaluation between conventional tool and textured tool in turning of AISI 6150 steel under minimum quantity lubrication. Journal of Materials Engineering and Performance, 1–20.
Roy, S., Swain, S., Das, A., & Das, S. R. (2026). Performance of AlTiN- and AlTiSiN-coated carbide tools in dry turning of hardened AISI 4140 steel: A comparative investigation. Journal of Materials Engineering and Performance, 35(3), 2971–2992.
Das, P. P., Padhiari, S., & Das, S. R. (2026). Experimental investigation and optimization of technological performance characteristics in 3D printing of ABS/PC composite polymer. Journal of Thermoplastic Composite Materials. Advance online publication.
Mishra, S., Sahu, S. K., & Das, S. R. (2026). Comparative performance evaluation between conventional tool and textured tool in turning of AISI 6150 steel under minimum quantity lubrication. Journal of Materials Engineering and Performance, 1–20.
Roy, S., Swain, S., Das, A., & Das, S. R. (2026). Performance of AlTiN- and AlTiSiN-coated carbide tools in dry turning of hardened AISI 4140 steel: A comparative investigation. Journal of Materials Engineering and Performance, 35(3), 2971–2992.
Das, P. P., Padhiari, S., & Das, S. R. (2026). Experimental investigation and optimization of technological performance characteristics in 3D printing of ABS/PC composite polymer. Journal of Thermoplastic Composite Materials. Advance online publication.
Mishra, S., Sahu, S. K., & Das, S. R. (2026). Comparative performance evaluation between conventional tool and textured tool in turning of AISI 6150 steel under minimum quantity lubrication. Journal of Materials Engineering and Performance, 1–20.
Roy, S., Swain, S., Das, A., & Das, S. R. (2026). Performance of AlTiN- and AlTiSiN-coated carbide tools in dry turning of hardened AISI 4140 steel: A comparative investigation. Journal of Materials Engineering and Performance, 35(3), 2971–2992.
Das, P. P., Padhiari, S., & Das, S. R. (2026). Experimental investigation and optimization of technological performance characteristics in 3D printing of ABS/PC composite polymer. Journal of Thermoplastic Composite Materials. Advance online publication.
Mishra, S., Sahu, S. K., & Das, S. R. (2026). Comparative performance evaluation between conventional tool and textured tool in turning of AISI 6150 steel under minimum quantity lubrication. Journal of Materials Engineering and Performance, 1–20.
Roy, S., Swain, S., Das, A., & Das, S. R. (2026). Performance of AlTiN- and AlTiSiN-coated carbide tools in dry turning of hardened AISI 4140 steel: A comparative investigation. Journal of Materials Engineering and Performance, 35(3), 2971–2992.
Das, P. P., Padhiari, S., & Das, S. R. (2026). Experimental investigation and optimization of technological performance characteristics in 3D printing of ABS/PC composite polymer. Journal of Thermoplastic Composite Materials. Advance online publication.
Mishra, S., Sahu, S. K., & Das, S. R. (2026). Comparative performance evaluation between conventional tool and textured tool in turning of AISI 6150 steel under minimum quantity lubrication. Journal of Materials Engineering and Performance, 1–20.
Roy, S., Swain, S., Das, A., & Das, S. R. (2026). Performance of AlTiN- and AlTiSiN-coated carbide tools in dry turning of hardened AISI 4140 steel: A comparative investigation. Journal of Materials Engineering and Performance, 35(3), 2971–2992.
Das, P. P., Padhiari, S., & Das, S. R. (2026). Experimental investigation and optimization of technological performance characteristics in 3D printing of ABS/PC composite polymer. Journal of Thermoplastic Composite Materials. Advance online publication.
Mishra, S., Sahu, S. K., & Das, S. R. (2026). Comparative performance evaluation between conventional tool and textured tool in turning of AISI 6150 steel under minimum quantity lubrication. Journal of Materials Engineering and Performance, 1–20.
Roy, S., Swain, S., Das, A., & Das, S. R. (2026). Performance of AlTiN- and AlTiSiN-coated carbide tools in dry turning of hardened AISI 4140 steel: A comparative investigation. Journal of Materials Engineering and Performance, 35(3), 2971–2992.
Das, P. P., Padhiari, S., & Das, S. R. (2026). Experimental investigation and optimization of technological performance characteristics in 3D printing of ABS/PC composite polymer. Journal of Thermoplastic Composite Materials. Advance online publication.
Mishra, S., Sahu, S. K., & Das, S. R. (2026). Comparative performance evaluation between conventional tool and textured tool in turning of AISI 6150 steel under minimum quantity lubrication. Journal of Materials Engineering and Performance, 1–20.
Roy, S., Swain, S., Das, A., & Das, S. R. (2026). Performance of AlTiN- and AlTiSiN-coated carbide tools in dry turning of hardened AISI 4140 steel: A comparative investigation. Journal of Materials Engineering and Performance, 35(3), 2971–2992.
Das, P. P., Padhiari, S., & Das, S. R. (2026). Experimental investigation and optimization of technological performance characteristics in 3D printing of ABS/PC composite polymer. Journal of Thermoplastic Composite Materials. Advance online publication.
Mishra, S., Sahu, S. K., & Das, S. R. (2026). Comparative performance evaluation between conventional tool and textured tool in turning of AISI 6150 steel under minimum quantity lubrication. Journal of Materials Engineering and Performance, 1–20.
Roy, S., Swain, S., Das, A., & Das, S. R. (2026). Performance of AlTiN- and AlTiSiN-coated carbide tools in dry turning of hardened AISI 4140 steel: A comparative investigation. Journal of Materials Engineering and Performance, 35(3), 2971–2992.
Das, P. P., Padhiari, S., & Das, S. R. (2026). Experimental investigation and optimization of technological performance characteristics in 3D printing of ABS/PC composite polymer. Journal of Thermoplastic Composite Materials. Advance online publication.
Mishra, S., Sahu, S. K., & Das, S. R. (2026). Comparative performance evaluation between conventional tool and textured tool in turning of AISI 6150 steel under minimum quantity lubrication. Journal of Materials Engineering and Performance, 1–20.
Roy, S., Swain, S., Das, A., & Das, S. R. (2026). Performance of AlTiN- and AlTiSiN-coated carbide tools in dry turning of hardened AISI 4140 steel: A comparative investigation. Journal of Materials Engineering and Performance, 35(3), 2971–2992.
Das, P. P., Padhiari, S., & Das, S. R. (2026). Experimental investigation and optimization of technological performance characteristics in 3D printing of ABS/PC composite polymer. Journal of Thermoplastic Composite Materials. Advance online publication.
Mishra, S., Sahu, S. K., & Das, S. R. (2026). Comparative performance evaluation between conventional tool and textured tool in turning of AISI 6150 steel under minimum quantity lubrication. Journal of Materials Engineering and Performance, 1–20.
Roy, S., Swain, S., Das, A., & Das, S. R. (2026). Performance of AlTiN- and AlTiSiN-coated carbide tools in dry turning of hardened AISI 4140 steel: A comparative investigation. Journal of Materials Engineering and Performance, 35(3), 2971–2992.
Das, P. P., Padhiari, S., & Das, S. R. (2026). Experimental investigation and optimization of technological performance characteristics in 3D printing of ABS/PC composite polymer. Journal of Thermoplastic Composite Materials. Advance online publication.
Mishra, S., Sahu, S. K., & Das, S. R. (2026). Comparative performance evaluation between conventional tool and textured tool in turning of AISI 6150 steel under minimum quantity lubrication. Journal of Materials Engineering and Performance, 1–20.
Roy, S., Swain, S., Das, A., & Das, S. R. (2026). Performance of AlTiN- and AlTiSiN-coated carbide tools in dry turning of hardened AISI 4140 steel: A comparative investigation. Journal of Materials Engineering and Performance, 35(3), 2971–2992.
Das, P. P., Padhiari, S., & Das, S. R. (2026). Experimental investigation and optimization of technological performance characteristics in 3D printing of ABS/PC composite polymer. Journal of Thermoplastic Composite Materials. Advance online publication.
Mishra, S., Sahu, S. K., & Das, S. R. (2026). Comparative performance evaluation between conventional tool and textured tool in turning of AISI 6150 steel under minimum quantity lubrication. Journal of Materials Engineering and Performance, 1–20.
Roy, S., Swain, S., Das, A., & Das, S. R. (2026). Performance of AlTiN- and AlTiSiN-coated carbide tools in dry turning of hardened AISI 4140 steel: A comparative investigation. Journal of Materials Engineering and Performance, 35(3), 2971–2992.
Das, P. P., Padhiari, S., & Das, S. R. (2026). Experimental investigation and optimization of technological performance characteristics in 3D printing of ABS/PC composite polymer. Journal of Thermoplastic Composite Materials. Advance online publication.
Mishra, S., Sahu, S. K., & Das, S. R. (2026). Comparative performance evaluation between conventional tool and textured tool in turning of AISI 6150 steel under minimum quantity lubrication. Journal of Materials Engineering and Performance, 1–20.
Roy, S., Swain, S., Das, A., & Das, S. R. (2026). Performance of AlTiN- and AlTiSiN-coated carbide tools in dry turning of hardened AISI 4140 steel: A comparative investigation. Journal of Materials Engineering and Performance, 35(3), 2971–2992.
Das, P. P., Padhiari, S., & Das, S. R. (2026). Experimental investigation and optimization of technological performance characteristics in 3D printing of ABS/PC composite polymer. Journal of Thermoplastic Composite Materials. Advance online publication.
Mishra, S., Sahu, S. K., & Das, S. R. (2026). Comparative performance evaluation between conventional tool and textured tool in turning of AISI 6150 steel under minimum quantity lubrication. Journal of Materials Engineering and Performance, 1–20.
Roy, S., Swain, S., Das, A., & Das, S. R. (2026). Performance of AlTiN- and AlTiSiN-coated carbide tools in dry turning of hardened AISI 4140 steel: A comparative investigation. Journal of Materials Engineering and Performance, 35(3), 2971–2992.
1. Das, P. P., Padhiari, S., & Das, S. R. (2026). Experimental investigation and optimization of technological performance characteristics in 3D printing of ABS/PC composite polymer. Journal of Thermoplastic Composite Materials. Advance online publication.
2. Mishra, S., Sahu, S. K., & Das, S. R. (2026). Comparative performance evaluation between conventional tool and textured tool in turning of AISI 6150 steel under minimum quantity lubrication. Journal of Materials Engineering and Performance, 1–20.
3. Roy, S., Swain, S., Das, A., & Das, S. R. (2026). Performance of AlTiN- and AlTiSiN-coated carbide tools in dry turning of hardened AISI 4140 steel: A comparative investigation. Journal of Materials Engineering and Performance, 35(3), 2971–2992.
1. Das, P. P., Padhiari, S., & Das, S. R. (2026). Experimental investigation and optimization of technological performance characteristics in 3D printing of ABS/PC composite polymer. Journal of Thermoplastic Composite Materials. Advance online publication.
2. Mishra, S., Sahu, S. K., & Das, S. R. (2026). Comparative performance evaluation between conventional tool and textured tool in turning of AISI 6150 steel under minimum quantity lubrication. Journal of Materials Engineering and Performance, 1–20.
3. Roy, S., Swain, S., Das, A., & Das, S. R. (2026). Performance of AlTiN- and AlTiSiN-coated carbide tools in dry turning of hardened AISI 4140 steel: A comparative investigation. Journal of Materials Engineering and Performance, 35(3), 2971–2992.
1. Das, P. P., Padhiari, S., & Das, S. R. (2026). Experimental investigation and optimization of technological performance characteristics in 3D printing of ABS/PC composite polymer. Journal of Thermoplastic Composite Materials. Advance online publication.
2. Mishra, S., Sahu, S. K., & Das, S. R. (2026). Comparative performance evaluation between conventional tool and textured tool in turning of AISI 6150 steel under minimum quantity lubrication. Journal of Materials Engineering and Performance, 1–20.
3. Roy, S., Swain, S., Das, A., & Das, S. R. (2026). Performance of AlTiN- and AlTiSiN-coated carbide tools in dry turning of hardened AISI 4140 steel: A comparative investigation. Journal of Materials Engineering and Performance, 35(3), 2971–2992.
Panda, S.; Pradhan, M; Panigrahi, S. K. (2026): Valorization of Waste Marble and Coal Overburden as coarse aggregates in Sustainable Self-Compacting Geopolymer Concrete, Journal of Building Engineering (ISSN: 2352-7102), Elsevier, SCIE, Q1, IF: 7.4, Vol. 127, pp. 116366 (1-25), https://doi.org/10.1016/j.jobe.2026.116366
S. K. Das, L. Pradhan, D. Bharatiya, R. N. Subudhi, R. Saraswat, S. Minz, B. Nayak, B. K. Jena and S. K. Swain* “High performance energy storage applications of polyaniline based functionalized multi walled carbon nanotubes nanocomposites” Journal of Energy Storage, 145, 119916 (2026). (Impact Factor: 9.8), ISSN: 2352-152X DOI: https://doi.org/10.1016/j.est.2025.119916
S. K. Das, D. Bharatiya, R. N. Subudhi, R. Saraswat, S. Minz, P. De and S. K. Swain* “F-MWCNT incorporated PVP/TiO₂ ternary nanocomposites for charge storage applications” Diamond and Related Materials, 113400 (2026). (Impact Factor: 5.1), ISSN: 0925-9635 DOI: https://doi.org/10.1016/j.diamond.2026.113400
S. Patra, K. M. Sahu and S. K. Swain* “L-Cysteine-mediated glucose sensing in human serum by carbon quantum dots entrapped sodium alginate nanocomposite: Maillard reaction-induced fluorescence switching” International Journal of Biological Macromolecules, 151286 (2026). (Impact Factor: 8.5), ISSN: 1879-0003 DOI: https://doi.org/10.1016/j.ijbiomac.2026.151286
S. Patra, K. M. Sahu, R. K. Bhoi and S. K. Swain* “CQD imprinted pectin for ex vivo glucose monitoring in human blood serum: Mechanistic insights into competitive esterification-driven fluorescence quenching” Analytica Chimica Acta, 345023 (2025). (Impact Factor: 6.0), ISSN: 0003-2670 DOI: https://doi.org/10.1016/j.aca.2025.345023
S. K. Das, L. Pradhan, D. Bharatiya, R. N. Subudhi, R. Saraswat, S. Minz, B. Nayak, B. K. Jena and S. K. Swain* “High performance energy storage applications of polyaniline based functionalized multi walled carbon nanotubes nanocomposites” Journal of Energy Storage, 145, 119916 (2026). (Impact Factor: 9.8), ISSN: 2352-152X DOI: https://doi.org/10.1016/j.est.2025.119916
S. K. Das, D. Bharatiya, R. N. Subudhi, R. Saraswat, S. Minz, P. De and S. K. Swain* “F-MWCNT incorporated PVP/TiO₂ ternary nanocomposites for charge storage applications” Diamond and Related Materials, 113400 (2026). (Impact Factor: 5.1), ISSN: 0925-9635 DOI: https://doi.org/10.1016/j.diamond.2026.113400
S. Patra, K. M. Sahu and S. K. Swain* “L-Cysteine-mediated glucose sensing in human serum by carbon quantum dots entrapped sodium alginate nanocomposite: Maillard reaction-induced fluorescence switching” International Journal of Biological Macromolecules, 151286 (2026). (Impact Factor: 8.5), ISSN: 1879-0003 DOI: https://doi.org/10.1016/j.ijbiomac.2026.151286
S. Patra, K. M. Sahu, R. K. Bhoi and S. K. Swain* “CQD imprinted pectin for ex vivo glucose monitoring in human blood serum: Mechanistic insights into competitive esterification-driven fluorescence quenching” Analytica Chimica Acta, 345023 (2025). (Impact Factor: 6.0), ISSN: 0003-2670 DOI: https://doi.org/10.1016/j.aca.2025.345023
S. K. Das, L. Pradhan, D. Bharatiya, R. N. Subudhi, R. Saraswat, S. Minz, B. Nayak, B. K. Jena and S. K. Swain* “High performance energy storage applications of polyaniline based functionalized multi walled carbon nanotubes nanocomposites” Journal of Energy Storage, 145, 119916 (2026). (Impact Factor: 9.8), ISSN: 2352-152X DOI: https://doi.org/10.1016/j.est.2025.119916
S. K. Das, D. Bharatiya, R. N. Subudhi, R. Saraswat, S. Minz, P. De and S. K. Swain* “F-MWCNT incorporated PVP/TiO₂ ternary nanocomposites for charge storage applications” Diamond and Related Materials, 113400 (2026). (Impact Factor: 5.1), ISSN: 0925-9635 DOI: https://doi.org/10.1016/j.diamond.2026.113400
S. Patra, K. M. Sahu and S. K. Swain* “L-Cysteine-mediated glucose sensing in human serum by carbon quantum dots entrapped sodium alginate nanocomposite: Maillard reaction-induced fluorescence switching” International Journal of Biological Macromolecules, 151286 (2026). (Impact Factor: 8.5), ISSN: 1879-0003 DOI: https://doi.org/10.1016/j.ijbiomac.2026.151286
S. Patra, K. M. Sahu, R. K. Bhoi and S. K. Swain* “CQD imprinted pectin for ex vivo glucose monitoring in human blood serum: Mechanistic insights into competitive esterification-driven fluorescence quenching” Analytica Chimica Acta, 345023 (2025). (Impact Factor: 6.0), ISSN: 0003-2670 DOI: https://doi.org/10.1016/j.aca.2025.345023
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
Srinivasan Chandrasekaran and Ajaya Kumar Das. "Numerical analysis of stiffness-driven passive heave control in a semisubmersible platform". International Journal of Optimization and Control: Theories & Applications. vol.16, no.2, pp.462-477,Jan 2026.
Srinivasan Chandrasekaran and Ajaya Kumar Das. "Numerical analysis of stiffness-driven passive heave control in a semisubmersible platform". International Journal of Optimization and Control: Theories & Applications. vol.16, no.2, pp.462-477,Jan 2026.
Srinivasan Chandrasekaran and Ajaya Kumar Das. "Numerical analysis of stiffness-driven passive heave control in a semisubmersible platform". International Journal of Optimization and Control: Theories & Applications. vol.16, no.2, pp.462-477,Jan 2026.
Srinivasan Chandrasekaran and Ajaya Kumar Das. "Numerical analysis of stiffness-driven passive heave control in a semisubmersible platform". International Journal of Optimization and Control: Theories & Applications. vol.16, no.2, pp.462-477,Jan 2026.
Srinivasan Chandrasekaran and Ajaya Kumar Das. "Numerical analysis of stiffness-driven passive heave control in a semisubmersible platform". International Journal of Optimization and Control: Theories & Applications. vol.16, no.2, pp.462-477,Jan 2026.
Srinivasan Chandrasekaran and Ajaya Kumar Das. "Numerical analysis of stiffness-driven passive heave control in a semisubmersible platform". International Journal of Optimization and Control: Theories & Applications. vol.16, no.2, pp.462-477,Jan 2026.
Srinivasan Chandrasekaran and Ajaya Kumar Das. "Numerical analysis of stiffness-driven passive heave control in a semisubmersible platform". International Journal of Optimization and Control: Theories & Applications. vol.16, no.2, pp.462-477,Jan 2026.
Srinivasan Chandrasekaran and Ajaya Kumar Das. "Numerical analysis of stiffness-driven passive heave control in a semisubmersible platform". International Journal of Optimization and Control: Theories & Applications. vol.16, no.2, pp.462-477,Jan 2026.
Srinivasan Chandrasekaran and Ajaya Kumar Das. "Numerical analysis of stiffness-driven passive heave control in a semisubmersible platform". International Journal of Optimization and Control: Theories & Applications. vol.16, no.2, pp.462-477,Jan 2026.
Panda, S., Das, R. Panigrahi, S. K. (2026): Interpretation of preferable curing conditions in the realization of durable self-compacting geopolymer concrete, Journal of Structural Design and Construction Practice, ASCE, ESCI, Q2, IF: 2.1, Vol. 31 (2), pp. 04026003 (1-15) https://doi.org/10.1061/JSDCCC.SCENG-2020.
Panda, S.and Panigrahi, S. K. (2026): Production of sustainable GGBFS-based self-compacting geopolymer concrete with waste rubber tire aggregates, Sustainable Chemistry and Pharmacy, Elsevier, SCIE, Q1, IF: 5.8, Vol. 51, pp. 102395 (1-23), https://doi.org/10.1016/j.scp.2026.102395.
Binayak Dash, M. Tripathy, Rajat Kanti Samal, A wind uncertainty-adjusted power system composite stability index for evaluating technological sustainability in wind-integrated power systems, Sustainable Energy, Grids and Networks, 2026, 102153, ISSN 2352-4677, https://doi.org/10.1016/j.segan.2026.102153.
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882
L. Panigrahi, J.P. Pandaand G C Dash, Effect of heat source/sink and entropy generation on free convection flow in a vertical micro channel: A non-linear Boussinesq approach,Z Angew Math Mech (ZAMM) pp.1-18 ,2025, DOI: doi.org/10.1002/zamm.70206
Srikanta Kumar Patta and J P Panda, “Hydromagnetic Radiative Chemically Reactive Flow along with Soret Effect over a Vertical Porous Plate”, J. Engg. Thermophysics, vol. 34, no. 4, pp. 929–947,2025, DOI: https://doi.org/10.1134/S1810232826700025
Arjun Agrawal and J P Panda, “Study the effect of thermal diffusion and viscous dissipation on MHD flow of micropolar fluid”, Int. J. Applied and Computational Mathematics, Vol.11 pp. 01-28,2025 doi.org/10.1007/s40819-025-01849-2
Pratibha Bhoi, Arjun Agrawal and J P Panda, “Numerical Investigation of Hybrid TiO2-Water Nano-Fluid with Heat Source and Induced Magnetic Field”, J. Engg. Thermophysics, vol. 34, no. 1, pp 227-239, Apr. 2025,Available: https://doi.org/10.1134/S1810232825010175
Manasi Mishra, J.P. Panda and S.S. Sahoo,“ Analytical inveﬆigations concerning entropy generation between two vertical concentric cylinders in the presence of MHD natural convective ﬂow of a polar ﬂuid in combination with thermal radiation”, Int. J. Modeling and Simulation, Mar. 2025. Available: https://doi.org/10.1080/02286203.2025.2478989
Padhan, S., Mohapatra, J. J., Mishra, L., Rout, A. K., & Das, S. R. (2025). Statistical investigation of power consumption in dry turning of stir-cast Al7075-SiC-Gr metal matrix composites. Materials Science Forum, 1171, 19–27.
Ajaya, B., Sahu, S. K., Jena, P. C., Das, S. R., & Dhupal, D. (2025). Experimental investigation and optimization on surface roughness and material deposition rate in electrical discharge coating of AA5754 alloy using Cu-W composite electrode. Journal of Materials Engineering and Performance, 1–22.
Ghadei, B. P., Dhupal, D., Sahu, S. K., Jena, P. C., Das, A., & Das, S. R. (2025). Experimental investigation on surface modification of AA5754 alloy in electrical discharge coating using Cu–W composite electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
Barik, E. S., Jena, P. C., Behera, R. K., Sethy, S., & Das, S. R. (2025). Experimental investigation and sustainability assessment in turning of newly developed AMMC (Al–Mg–Si–Cu–SiC) using coated carbide tool under minimum quantity lubrication. Arabian Journal for Science and Engineering, 50(22), 18777–18798.
Sarangi, S., Behera, A. K., Bajpai, S., Sahoo, S., Sethy, S., & Das, S. R. (2025). Application of tri-vector analysis to identify the optimum coating thickness in induced draft fans. Surface Review and Letters, 32(10), 2450133.
Padhan, S., Das, A., & Das, S. R. (2025). Analysis, modelling and optimization on tool vibration in machining of Nitronic 60 with SiAlON ceramic tool. Advances in Materials and Processing Technologies, 11(4), 3926–3939.
Mahapatra, S., Das, A., Roy, S., Jena, P. C., Babu, M. N., & Das, S. R. (2025). Hard turning of AISI H13 steel with AlTiSiN coated carbide tool using MWCNT-based nanofluid under minimum quantity lubrication: Experimental investigation and sustainability assessment. Sādhanā, 50(3), 197.
Swain, S., Roy, S., Das, A., & Das, S. R. (2025). Investigation on flank wear, surface roughness and chip morphology in turning of AISI D7 steel with AlTiSiN coated carbide tool using zinc oxide enriched nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Nanda, A., Das, S. R., Padhan, S., Dash, L., & Rout, B. (2025). Experimental investigation, modeling, and optimization of power consumption and surface roughness in 3D printing of PLA. Surface Review and Letters, 2550199.
Padhan, S., Mishra, S., Sahu, S. K., Das, A., Das, S. R., & Mohapatra, S. (2025). Enhancing machining performance and sustainability: A comprehensive review of minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
Das, A., Barrenkala, D., Das, S. R., Patel, S. K., Somani, N., & Kumar, C. S. (2025). Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Das, A., Gautam, A., Panda, A., Das, S. R., Debnath, K., & Ramakrishna, C. (2025). Comparative performance evaluation between uncoated and TiAlN + AlCrN coated carbide tools in hard turning of AISI H11 steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Sethy, S., Das, S. R., Rana, J., Behera, A. K., & Gupta, M. K. (2025). Performance evaluation and economic assessment in electrical discharge machining of SS316 using graphite powder dispersed in biodegradable palm oil dielectric. Surface Review and Letters, 32(03), 2450120.
Roy, S., Das, A., Kumar, R., Das, S. R., Rafighi, M., & Sharma, P. (2025). Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on performance and sustainability assessment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Das, A., Mohapatra, S., Gajrani, K. K., Das, S. R., & Patel, S. K. (2025). Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Kirankumar, B., Siva, K., Siva Satya Mohan, K., Ranjan, V. K., Das, S., & Sharmaa, P. (2025). Advancing Wire Electrical Discharge Machining of AISI P20+ Ni Steel Using Hybrid Deep Belief Neural Network-Search and Rescue Optimization Algorithm. Int. J. Vehicle Structures & Systems, 17(1), 120-126.
Padhan, S., Mohapatra, J. J., Mishra, L., Rout, A. K., & Das, S. R. (2025). Statistical investigation of power consumption in dry turning of stir-cast Al7075-SiC-Gr metal matrix composites. Materials Science Forum, 1171, 19–27.
Ajaya, B., Sahu, S. K., Jena, P. C., Das, S. R., & Dhupal, D. (2025). Experimental investigation and optimization on surface roughness and material deposition rate in electrical discharge coating of AA5754 alloy using Cu-W composite electrode. Journal of Materials Engineering and Performance, 1–22.
Ghadei, B. P., Dhupal, D., Sahu, S. K., Jena, P. C., Das, A., & Das, S. R. (2025). Experimental investigation on surface modification of AA5754 alloy in electrical discharge coating using Cu–W composite electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
Barik, E. S., Jena, P. C., Behera, R. K., Sethy, S., & Das, S. R. (2025). Experimental investigation and sustainability assessment in turning of newly developed AMMC (Al–Mg–Si–Cu–SiC) using coated carbide tool under minimum quantity lubrication. Arabian Journal for Science and Engineering, 50(22), 18777–18798.
Sarangi, S., Behera, A. K., Bajpai, S., Sahoo, S., Sethy, S., & Das, S. R. (2025). Application of tri-vector analysis to identify the optimum coating thickness in induced draft fans. Surface Review and Letters, 32(10), 2450133.
Padhan, S., Das, A., & Das, S. R. (2025). Analysis, modelling and optimization on tool vibration in machining of Nitronic 60 with SiAlON ceramic tool. Advances in Materials and Processing Technologies, 11(4), 3926–3939.
Mahapatra, S., Das, A., Roy, S., Jena, P. C., Babu, M. N., & Das, S. R. (2025). Hard turning of AISI H13 steel with AlTiSiN coated carbide tool using MWCNT-based nanofluid under minimum quantity lubrication: Experimental investigation and sustainability assessment. Sādhanā, 50(3), 197.
Swain, S., Roy, S., Das, A., & Das, S. R. (2025). Investigation on flank wear, surface roughness and chip morphology in turning of AISI D7 steel with AlTiSiN coated carbide tool using zinc oxide enriched nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Nanda, A., Das, S. R., Padhan, S., Dash, L., & Rout, B. (2025). Experimental investigation, modeling, and optimization of power consumption and surface roughness in 3D printing of PLA. Surface Review and Letters, 2550199.
Padhan, S., Mishra, S., Sahu, S. K., Das, A., Das, S. R., & Mohapatra, S. (2025). Enhancing machining performance and sustainability: A comprehensive review of minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
Das, A., Barrenkala, D., Das, S. R., Patel, S. K., Somani, N., & Kumar, C. S. (2025). Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Das, A., Gautam, A., Panda, A., Das, S. R., Debnath, K., & Ramakrishna, C. (2025). Comparative performance evaluation between uncoated and TiAlN + AlCrN coated carbide tools in hard turning of AISI H11 steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Sethy, S., Das, S. R., Rana, J., Behera, A. K., & Gupta, M. K. (2025). Performance evaluation and economic assessment in electrical discharge machining of SS316 using graphite powder dispersed in biodegradable palm oil dielectric. Surface Review and Letters, 32(03), 2450120.
Roy, S., Das, A., Kumar, R., Das, S. R., Rafighi, M., & Sharma, P. (2025). Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on performance and sustainability assessment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Das, A., Mohapatra, S., Gajrani, K. K., Das, S. R., & Patel, S. K. (2025). Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Kirankumar, B., Siva, K., Siva Satya Mohan, K., Ranjan, V. K., Das, S., & Sharmaa, P. (2025). Advancing Wire Electrical Discharge Machining of AISI P20+ Ni Steel Using Hybrid Deep Belief Neural Network-Search and Rescue Optimization Algorithm. Int. J. Vehicle Structures & Systems, 17(1), 120-126.
Padhan, S., Mohapatra, J. J., Mishra, L., Rout, A. K., & Das, S. R. (2025). Statistical investigation of power consumption in dry turning of stir-cast Al7075-SiC-Gr metal matrix composites. Materials Science Forum, 1171, 19–27.
Ajaya, B., Sahu, S. K., Jena, P. C., Das, S. R., & Dhupal, D. (2025). Experimental investigation and optimization on surface roughness and material deposition rate in electrical discharge coating of AA5754 alloy using Cu-W composite electrode. Journal of Materials Engineering and Performance, 1–22.
Ghadei, B. P., Dhupal, D., Sahu, S. K., Jena, P. C., Das, A., & Das, S. R. (2025). Experimental investigation on surface modification of AA5754 alloy in electrical discharge coating using Cu–W composite electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
Barik, E. S., Jena, P. C., Behera, R. K., Sethy, S., & Das, S. R. (2025). Experimental investigation and sustainability assessment in turning of newly developed AMMC (Al–Mg–Si–Cu–SiC) using coated carbide tool under minimum quantity lubrication. Arabian Journal for Science and Engineering, 50(22), 18777–18798.
Sarangi, S., Behera, A. K., Bajpai, S., Sahoo, S., Sethy, S., & Das, S. R. (2025). Application of tri-vector analysis to identify the optimum coating thickness in induced draft fans. Surface Review and Letters, 32(10), 2450133.
Padhan, S., Das, A., & Das, S. R. (2025). Analysis, modelling and optimization on tool vibration in machining of Nitronic 60 with SiAlON ceramic tool. Advances in Materials and Processing Technologies, 11(4), 3926–3939.
Mahapatra, S., Das, A., Roy, S., Jena, P. C., Babu, M. N., & Das, S. R. (2025). Hard turning of AISI H13 steel with AlTiSiN coated carbide tool using MWCNT-based nanofluid under minimum quantity lubrication: Experimental investigation and sustainability assessment. Sādhanā, 50(3), 197.
Swain, S., Roy, S., Das, A., & Das, S. R. (2025). Investigation on flank wear, surface roughness and chip morphology in turning of AISI D7 steel with AlTiSiN coated carbide tool using zinc oxide enriched nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Nanda, A., Das, S. R., Padhan, S., Dash, L., & Rout, B. (2025). Experimental investigation, modeling, and optimization of power consumption and surface roughness in 3D printing of PLA. Surface Review and Letters, 2550199.
Padhan, S., Mishra, S., Sahu, S. K., Das, A., Das, S. R., & Mohapatra, S. (2025). Enhancing machining performance and sustainability: A comprehensive review of minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
Das, A., Barrenkala, D., Das, S. R., Patel, S. K., Somani, N., & Kumar, C. S. (2025). Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Das, A., Gautam, A., Panda, A., Das, S. R., Debnath, K., & Ramakrishna, C. (2025). Comparative performance evaluation between uncoated and TiAlN + AlCrN coated carbide tools in hard turning of AISI H11 steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Sethy, S., Das, S. R., Rana, J., Behera, A. K., & Gupta, M. K. (2025). Performance evaluation and economic assessment in electrical discharge machining of SS316 using graphite powder dispersed in biodegradable palm oil dielectric. Surface Review and Letters, 32(03), 2450120.
Roy, S., Das, A., Kumar, R., Das, S. R., Rafighi, M., & Sharma, P. (2025). Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on performance and sustainability assessment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Das, A., Mohapatra, S., Gajrani, K. K., Das, S. R., & Patel, S. K. (2025). Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Kirankumar, B., Siva, K., Siva Satya Mohan, K., Ranjan, V. K., Das, S., & Sharmaa, P. (2025). Advancing Wire Electrical Discharge Machining of AISI P20+ Ni Steel Using Hybrid Deep Belief Neural Network-Search and Rescue Optimization Algorithm. Int. J. Vehicle Structures & Systems, 17(1), 120-126.
Padhan, S., Mohapatra, J. J., Mishra, L., Rout, A. K., & Das, S. R. (2025). Statistical investigation of power consumption in dry turning of stir-cast Al7075-SiC-Gr metal matrix composites. Materials Science Forum, 1171, 19–27.
Ajaya, B., Sahu, S. K., Jena, P. C., Das, S. R., & Dhupal, D. (2025). Experimental investigation and optimization on surface roughness and material deposition rate in electrical discharge coating of AA5754 alloy using Cu-W composite electrode. Journal of Materials Engineering and Performance, 1–22.
Ghadei, B. P., Dhupal, D., Sahu, S. K., Jena, P. C., Das, A., & Das, S. R. (2025). Experimental investigation on surface modification of AA5754 alloy in electrical discharge coating using Cu–W composite electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
Barik, E. S., Jena, P. C., Behera, R. K., Sethy, S., & Das, S. R. (2025). Experimental investigation and sustainability assessment in turning of newly developed AMMC (Al–Mg–Si–Cu–SiC) using coated carbide tool under minimum quantity lubrication. Arabian Journal for Science and Engineering, 50(22), 18777–18798.
Sarangi, S., Behera, A. K., Bajpai, S., Sahoo, S., Sethy, S., & Das, S. R. (2025). Application of tri-vector analysis to identify the optimum coating thickness in induced draft fans. Surface Review and Letters, 32(10), 2450133.
Padhan, S., Das, A., & Das, S. R. (2025). Analysis, modelling and optimization on tool vibration in machining of Nitronic 60 with SiAlON ceramic tool. Advances in Materials and Processing Technologies, 11(4), 3926–3939.
Mahapatra, S., Das, A., Roy, S., Jena, P. C., Babu, M. N., & Das, S. R. (2025). Hard turning of AISI H13 steel with AlTiSiN coated carbide tool using MWCNT-based nanofluid under minimum quantity lubrication: Experimental investigation and sustainability assessment. Sādhanā, 50(3), 197.
Swain, S., Roy, S., Das, A., & Das, S. R. (2025). Investigation on flank wear, surface roughness and chip morphology in turning of AISI D7 steel with AlTiSiN coated carbide tool using zinc oxide enriched nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Nanda, A., Das, S. R., Padhan, S., Dash, L., & Rout, B. (2025). Experimental investigation, modeling, and optimization of power consumption and surface roughness in 3D printing of PLA. Surface Review and Letters, 2550199.
Padhan, S., Mishra, S., Sahu, S. K., Das, A., Das, S. R., & Mohapatra, S. (2025). Enhancing machining performance and sustainability: A comprehensive review of minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
Das, A., Barrenkala, D., Das, S. R., Patel, S. K., Somani, N., & Kumar, C. S. (2025). Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Das, A., Gautam, A., Panda, A., Das, S. R., Debnath, K., & Ramakrishna, C. (2025). Comparative performance evaluation between uncoated and TiAlN + AlCrN coated carbide tools in hard turning of AISI H11 steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Sethy, S., Das, S. R., Rana, J., Behera, A. K., & Gupta, M. K. (2025). Performance evaluation and economic assessment in electrical discharge machining of SS316 using graphite powder dispersed in biodegradable palm oil dielectric. Surface Review and Letters, 32(03), 2450120.
Roy, S., Das, A., Kumar, R., Das, S. R., Rafighi, M., & Sharma, P. (2025). Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on performance and sustainability assessment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Das, A., Mohapatra, S., Gajrani, K. K., Das, S. R., & Patel, S. K. (2025). Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Kirankumar, B., Siva, K., Siva Satya Mohan, K., Ranjan, V. K., Das, S., & Sharmaa, P. (2025). Advancing Wire Electrical Discharge Machining of AISI P20+ Ni Steel Using Hybrid Deep Belief Neural Network-Search and Rescue Optimization Algorithm. Int. J. Vehicle Structures & Systems, 17(1), 120-126.
Padhan, S., Mohapatra, J. J., Mishra, L., Rout, A. K., & Das, S. R. (2025). Statistical investigation of power consumption in dry turning of stir-cast Al7075-SiC-Gr metal matrix composites. Materials Science Forum, 1171, 19–27.
Ajaya, B., Sahu, S. K., Jena, P. C., Das, S. R., & Dhupal, D. (2025). Experimental investigation and optimization on surface roughness and material deposition rate in electrical discharge coating of AA5754 alloy using Cu-W composite electrode. Journal of Materials Engineering and Performance, 1–22.
Ghadei, B. P., Dhupal, D., Sahu, S. K., Jena, P. C., Das, A., & Das, S. R. (2025). Experimental investigation on surface modification of AA5754 alloy in electrical discharge coating using Cu–W composite electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
Barik, E. S., Jena, P. C., Behera, R. K., Sethy, S., & Das, S. R. (2025). Experimental investigation and sustainability assessment in turning of newly developed AMMC (Al–Mg–Si–Cu–SiC) using coated carbide tool under minimum quantity lubrication. Arabian Journal for Science and Engineering, 50(22), 18777–18798.
Sarangi, S., Behera, A. K., Bajpai, S., Sahoo, S., Sethy, S., & Das, S. R. (2025). Application of tri-vector analysis to identify the optimum coating thickness in induced draft fans. Surface Review and Letters, 32(10), 2450133.
Padhan, S., Das, A., & Das, S. R. (2025). Analysis, modelling and optimization on tool vibration in machining of Nitronic 60 with SiAlON ceramic tool. Advances in Materials and Processing Technologies, 11(4), 3926–3939.
Mahapatra, S., Das, A., Roy, S., Jena, P. C., Babu, M. N., & Das, S. R. (2025). Hard turning of AISI H13 steel with AlTiSiN coated carbide tool using MWCNT-based nanofluid under minimum quantity lubrication: Experimental investigation and sustainability assessment. Sādhanā, 50(3), 197.
Swain, S., Roy, S., Das, A., & Das, S. R. (2025). Investigation on flank wear, surface roughness and chip morphology in turning of AISI D7 steel with AlTiSiN coated carbide tool using zinc oxide enriched nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Nanda, A., Das, S. R., Padhan, S., Dash, L., & Rout, B. (2025). Experimental investigation, modeling, and optimization of power consumption and surface roughness in 3D printing of PLA. Surface Review and Letters, 2550199.
Padhan, S., Mishra, S., Sahu, S. K., Das, A., Das, S. R., & Mohapatra, S. (2025). Enhancing machining performance and sustainability: A comprehensive review of minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
Das, A., Barrenkala, D., Das, S. R., Patel, S. K., Somani, N., & Kumar, C. S. (2025). Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Das, A., Gautam, A., Panda, A., Das, S. R., Debnath, K., & Ramakrishna, C. (2025). Comparative performance evaluation between uncoated and TiAlN + AlCrN coated carbide tools in hard turning of AISI H11 steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Sethy, S., Das, S. R., Rana, J., Behera, A. K., & Gupta, M. K. (2025). Performance evaluation and economic assessment in electrical discharge machining of SS316 using graphite powder dispersed in biodegradable palm oil dielectric. Surface Review and Letters, 32(03), 2450120.
Roy, S., Das, A., Kumar, R., Das, S. R., Rafighi, M., & Sharma, P. (2025). Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on performance and sustainability assessment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Das, A., Mohapatra, S., Gajrani, K. K., Das, S. R., & Patel, S. K. (2025). Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Kirankumar, B., Siva, K., Siva Satya Mohan, K., Ranjan, V. K., Das, S., & Sharmaa, P. (2025). Advancing Wire Electrical Discharge Machining of AISI P20+ Ni Steel Using Hybrid Deep Belief Neural Network-Search and Rescue Optimization Algorithm. Int. J. Vehicle Structures & Systems, 17(1), 120-126.
Padhan, S., Mohapatra, J. J., Mishra, L., Rout, A. K., & Das, S. R. (2025). Statistical investigation of power consumption in dry turning of stir-cast Al7075-SiC-Gr metal matrix composites. Materials Science Forum, 1171, 19–27.
Ajaya, B., Sahu, S. K., Jena, P. C., Das, S. R., & Dhupal, D. (2025). Experimental investigation and optimization on surface roughness and material deposition rate in electrical discharge coating of AA5754 alloy using Cu-W composite electrode. Journal of Materials Engineering and Performance, 1–22.
Ghadei, B. P., Dhupal, D., Sahu, S. K., Jena, P. C., Das, A., & Das, S. R. (2025). Experimental investigation on surface modification of AA5754 alloy in electrical discharge coating using Cu–W composite electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
Barik, E. S., Jena, P. C., Behera, R. K., Sethy, S., & Das, S. R. (2025). Experimental investigation and sustainability assessment in turning of newly developed AMMC (Al–Mg–Si–Cu–SiC) using coated carbide tool under minimum quantity lubrication. Arabian Journal for Science and Engineering, 50(22), 18777–18798.
Sarangi, S., Behera, A. K., Bajpai, S., Sahoo, S., Sethy, S., & Das, S. R. (2025). Application of tri-vector analysis to identify the optimum coating thickness in induced draft fans. Surface Review and Letters, 32(10), 2450133.
Padhan, S., Das, A., & Das, S. R. (2025). Analysis, modelling and optimization on tool vibration in machining of Nitronic 60 with SiAlON ceramic tool. Advances in Materials and Processing Technologies, 11(4), 3926–3939.
Mahapatra, S., Das, A., Roy, S., Jena, P. C., Babu, M. N., & Das, S. R. (2025). Hard turning of AISI H13 steel with AlTiSiN coated carbide tool using MWCNT-based nanofluid under minimum quantity lubrication: Experimental investigation and sustainability assessment. Sādhanā, 50(3), 197.
Swain, S., Roy, S., Das, A., & Das, S. R. (2025). Investigation on flank wear, surface roughness and chip morphology in turning of AISI D7 steel with AlTiSiN coated carbide tool using zinc oxide enriched nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Nanda, A., Das, S. R., Padhan, S., Dash, L., & Rout, B. (2025). Experimental investigation, modeling, and optimization of power consumption and surface roughness in 3D printing of PLA. Surface Review and Letters, 2550199.
Padhan, S., Mishra, S., Sahu, S. K., Das, A., Das, S. R., & Mohapatra, S. (2025). Enhancing machining performance and sustainability: A comprehensive review of minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
Das, A., Barrenkala, D., Das, S. R., Patel, S. K., Somani, N., & Kumar, C. S. (2025). Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Das, A., Gautam, A., Panda, A., Das, S. R., Debnath, K., & Ramakrishna, C. (2025). Comparative performance evaluation between uncoated and TiAlN + AlCrN coated carbide tools in hard turning of AISI H11 steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Sethy, S., Das, S. R., Rana, J., Behera, A. K., & Gupta, M. K. (2025). Performance evaluation and economic assessment in electrical discharge machining of SS316 using graphite powder dispersed in biodegradable palm oil dielectric. Surface Review and Letters, 32(03), 2450120.
Roy, S., Das, A., Kumar, R., Das, S. R., Rafighi, M., & Sharma, P. (2025). Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on performance and sustainability assessment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Das, A., Mohapatra, S., Gajrani, K. K., Das, S. R., & Patel, S. K. (2025). Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Kirankumar, B., Siva, K., Siva Satya Mohan, K., Ranjan, V. K., Das, S., & Sharmaa, P. (2025). Advancing Wire Electrical Discharge Machining of AISI P20+ Ni Steel Using Hybrid Deep Belief Neural Network-Search and Rescue Optimization Algorithm. Int. J. Vehicle Structures & Systems, 17(1), 120-126.
Padhan, S., Mohapatra, J. J., Mishra, L., Rout, A. K., & Das, S. R. (2025). Statistical investigation of power consumption in dry turning of stir-cast Al7075-SiC-Gr metal matrix composites. Materials Science Forum, 1171, 19–27.
Ajaya, B., Sahu, S. K., Jena, P. C., Das, S. R., & Dhupal, D. (2025). Experimental investigation and optimization on surface roughness and material deposition rate in electrical discharge coating of AA5754 alloy using Cu-W composite electrode. Journal of Materials Engineering and Performance, 1–22.
Ghadei, B. P., Dhupal, D., Sahu, S. K., Jena, P. C., Das, A., & Das, S. R. (2025). Experimental investigation on surface modification of AA5754 alloy in electrical discharge coating using Cu–W composite electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
Barik, E. S., Jena, P. C., Behera, R. K., Sethy, S., & Das, S. R. (2025). Experimental investigation and sustainability assessment in turning of newly developed AMMC (Al–Mg–Si–Cu–SiC) using coated carbide tool under minimum quantity lubrication. Arabian Journal for Science and Engineering, 50(22), 18777–18798.
Sarangi, S., Behera, A. K., Bajpai, S., Sahoo, S., Sethy, S., & Das, S. R. (2025). Application of tri-vector analysis to identify the optimum coating thickness in induced draft fans. Surface Review and Letters, 32(10), 2450133.
Padhan, S., Das, A., & Das, S. R. (2025). Analysis, modelling and optimization on tool vibration in machining of Nitronic 60 with SiAlON ceramic tool. Advances in Materials and Processing Technologies, 11(4), 3926–3939.
Mahapatra, S., Das, A., Roy, S., Jena, P. C., Babu, M. N., & Das, S. R. (2025). Hard turning of AISI H13 steel with AlTiSiN coated carbide tool using MWCNT-based nanofluid under minimum quantity lubrication: Experimental investigation and sustainability assessment. Sādhanā, 50(3), 197.
Swain, S., Roy, S., Das, A., & Das, S. R. (2025). Investigation on flank wear, surface roughness and chip morphology in turning of AISI D7 steel with AlTiSiN coated carbide tool using zinc oxide enriched nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Nanda, A., Das, S. R., Padhan, S., Dash, L., & Rout, B. (2025). Experimental investigation, modeling, and optimization of power consumption and surface roughness in 3D printing of PLA. Surface Review and Letters, 2550199.
Padhan, S., Mishra, S., Sahu, S. K., Das, A., Das, S. R., & Mohapatra, S. (2025). Enhancing machining performance and sustainability: A comprehensive review of minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
Das, A., Barrenkala, D., Das, S. R., Patel, S. K., Somani, N., & Kumar, C. S. (2025). Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Das, A., Gautam, A., Panda, A., Das, S. R., Debnath, K., & Ramakrishna, C. (2025). Comparative performance evaluation between uncoated and TiAlN + AlCrN coated carbide tools in hard turning of AISI H11 steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Sethy, S., Das, S. R., Rana, J., Behera, A. K., & Gupta, M. K. (2025). Performance evaluation and economic assessment in electrical discharge machining of SS316 using graphite powder dispersed in biodegradable palm oil dielectric. Surface Review and Letters, 32(03), 2450120.
Roy, S., Das, A., Kumar, R., Das, S. R., Rafighi, M., & Sharma, P. (2025). Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on performance and sustainability assessment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Das, A., Mohapatra, S., Gajrani, K. K., Das, S. R., & Patel, S. K. (2025). Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Kirankumar, B., Siva, K., Siva Satya Mohan, K., Ranjan, V. K., Das, S., & Sharmaa, P. (2025). Advancing Wire Electrical Discharge Machining of AISI P20+ Ni Steel Using Hybrid Deep Belief Neural Network-Search and Rescue Optimization Algorithm. Int. J. Vehicle Structures & Systems, 17(1), 120-126.
Padhan, S., Mohapatra, J. J., Mishra, L., Rout, A. K., & Das, S. R. (2025). Statistical investigation of power consumption in dry turning of stir-cast Al7075-SiC-Gr metal matrix composites. Materials Science Forum, 1171, 19–27.
Ajaya, B., Sahu, S. K., Jena, P. C., Das, S. R., & Dhupal, D. (2025). Experimental investigation and optimization on surface roughness and material deposition rate in electrical discharge coating of AA5754 alloy using Cu-W composite electrode. Journal of Materials Engineering and Performance, 1–22.
Ghadei, B. P., Dhupal, D., Sahu, S. K., Jena, P. C., Das, A., & Das, S. R. (2025). Experimental investigation on surface modification of AA5754 alloy in electrical discharge coating using Cu–W composite electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
Barik, E. S., Jena, P. C., Behera, R. K., Sethy, S., & Das, S. R. (2025). Experimental investigation and sustainability assessment in turning of newly developed AMMC (Al–Mg–Si–Cu–SiC) using coated carbide tool under minimum quantity lubrication. Arabian Journal for Science and Engineering, 50(22), 18777–18798.
Sarangi, S., Behera, A. K., Bajpai, S., Sahoo, S., Sethy, S., & Das, S. R. (2025). Application of tri-vector analysis to identify the optimum coating thickness in induced draft fans. Surface Review and Letters, 32(10), 2450133.
Padhan, S., Das, A., & Das, S. R. (2025). Analysis, modelling and optimization on tool vibration in machining of Nitronic 60 with SiAlON ceramic tool. Advances in Materials and Processing Technologies, 11(4), 3926–3939.
Mahapatra, S., Das, A., Roy, S., Jena, P. C., Babu, M. N., & Das, S. R. (2025). Hard turning of AISI H13 steel with AlTiSiN coated carbide tool using MWCNT-based nanofluid under minimum quantity lubrication: Experimental investigation and sustainability assessment. Sādhanā, 50(3), 197.
Swain, S., Roy, S., Das, A., & Das, S. R. (2025). Investigation on flank wear, surface roughness and chip morphology in turning of AISI D7 steel with AlTiSiN coated carbide tool using zinc oxide enriched nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Nanda, A., Das, S. R., Padhan, S., Dash, L., & Rout, B. (2025). Experimental investigation, modeling, and optimization of power consumption and surface roughness in 3D printing of PLA. Surface Review and Letters, 2550199.
Padhan, S., Mishra, S., Sahu, S. K., Das, A., Das, S. R., & Mohapatra, S. (2025). Enhancing machining performance and sustainability: A comprehensive review of minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
Das, A., Barrenkala, D., Das, S. R., Patel, S. K., Somani, N., & Kumar, C. S. (2025). Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Das, A., Gautam, A., Panda, A., Das, S. R., Debnath, K., & Ramakrishna, C. (2025). Comparative performance evaluation between uncoated and TiAlN + AlCrN coated carbide tools in hard turning of AISI H11 steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Sethy, S., Das, S. R., Rana, J., Behera, A. K., & Gupta, M. K. (2025). Performance evaluation and economic assessment in electrical discharge machining of SS316 using graphite powder dispersed in biodegradable palm oil dielectric. Surface Review and Letters, 32(03), 2450120.
Roy, S., Das, A., Kumar, R., Das, S. R., Rafighi, M., & Sharma, P. (2025). Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on performance and sustainability assessment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Das, A., Mohapatra, S., Gajrani, K. K., Das, S. R., & Patel, S. K. (2025). Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Kirankumar, B., Siva, K., Siva Satya Mohan, K., Ranjan, V. K., Das, S., & Sharmaa, P. (2025). Advancing Wire Electrical Discharge Machining of AISI P20+ Ni Steel Using Hybrid Deep Belief Neural Network-Search and Rescue Optimization Algorithm. Int. J. Vehicle Structures & Systems, 17(1), 120-126.
Padhan, S., Mohapatra, J. J., Mishra, L., Rout, A. K., & Das, S. R. (2025). Statistical investigation of power consumption in dry turning of stir-cast Al7075-SiC-Gr metal matrix composites. Materials Science Forum, 1171, 19–27.
Ajaya, B., Sahu, S. K., Jena, P. C., Das, S. R., & Dhupal, D. (2025). Experimental investigation and optimization on surface roughness and material deposition rate in electrical discharge coating of AA5754 alloy using Cu-W composite electrode. Journal of Materials Engineering and Performance, 1–22.
Ghadei, B. P., Dhupal, D., Sahu, S. K., Jena, P. C., Das, A., & Das, S. R. (2025). Experimental investigation on surface modification of AA5754 alloy in electrical discharge coating using Cu–W composite electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
Barik, E. S., Jena, P. C., Behera, R. K., Sethy, S., & Das, S. R. (2025). Experimental investigation and sustainability assessment in turning of newly developed AMMC (Al–Mg–Si–Cu–SiC) using coated carbide tool under minimum quantity lubrication. Arabian Journal for Science and Engineering, 50(22), 18777–18798.
Sarangi, S., Behera, A. K., Bajpai, S., Sahoo, S., Sethy, S., & Das, S. R. (2025). Application of tri-vector analysis to identify the optimum coating thickness in induced draft fans. Surface Review and Letters, 32(10), 2450133.
Padhan, S., Das, A., & Das, S. R. (2025). Analysis, modelling and optimization on tool vibration in machining of Nitronic 60 with SiAlON ceramic tool. Advances in Materials and Processing Technologies, 11(4), 3926–3939.
Mahapatra, S., Das, A., Roy, S., Jena, P. C., Babu, M. N., & Das, S. R. (2025). Hard turning of AISI H13 steel with AlTiSiN coated carbide tool using MWCNT-based nanofluid under minimum quantity lubrication: Experimental investigation and sustainability assessment. Sādhanā, 50(3), 197.
Swain, S., Roy, S., Das, A., & Das, S. R. (2025). Investigation on flank wear, surface roughness and chip morphology in turning of AISI D7 steel with AlTiSiN coated carbide tool using zinc oxide enriched nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Nanda, A., Das, S. R., Padhan, S., Dash, L., & Rout, B. (2025). Experimental investigation, modeling, and optimization of power consumption and surface roughness in 3D printing of PLA. Surface Review and Letters, 2550199.
Padhan, S., Mishra, S., Sahu, S. K., Das, A., Das, S. R., & Mohapatra, S. (2025). Enhancing machining performance and sustainability: A comprehensive review of minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
Das, A., Barrenkala, D., Das, S. R., Patel, S. K., Somani, N., & Kumar, C. S. (2025). Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Das, A., Gautam, A., Panda, A., Das, S. R., Debnath, K., & Ramakrishna, C. (2025). Comparative performance evaluation between uncoated and TiAlN + AlCrN coated carbide tools in hard turning of AISI H11 steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Sethy, S., Das, S. R., Rana, J., Behera, A. K., & Gupta, M. K. (2025). Performance evaluation and economic assessment in electrical discharge machining of SS316 using graphite powder dispersed in biodegradable palm oil dielectric. Surface Review and Letters, 32(03), 2450120.
Roy, S., Das, A., Kumar, R., Das, S. R., Rafighi, M., & Sharma, P. (2025). Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on performance and sustainability assessment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Das, A., Mohapatra, S., Gajrani, K. K., Das, S. R., & Patel, S. K. (2025). Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Kirankumar, B., Siva, K., Siva Satya Mohan, K., Ranjan, V. K., Das, S., & Sharmaa, P. (2025). Advancing Wire Electrical Discharge Machining of AISI P20+ Ni Steel Using Hybrid Deep Belief Neural Network-Search and Rescue Optimization Algorithm. Int. J. Vehicle Structures & Systems, 17(1), 120-126.
Padhan, S., Mohapatra, J. J., Mishra, L., Rout, A. K., & Das, S. R. (2025). Statistical investigation of power consumption in dry turning of stir-cast Al7075-SiC-Gr metal matrix composites. Materials Science Forum, 1171, 19–27.
Ajaya, B., Sahu, S. K., Jena, P. C., Das, S. R., & Dhupal, D. (2025). Experimental investigation and optimization on surface roughness and material deposition rate in electrical discharge coating of AA5754 alloy using Cu-W composite electrode. Journal of Materials Engineering and Performance, 1–22.
Ghadei, B. P., Dhupal, D., Sahu, S. K., Jena, P. C., Das, A., & Das, S. R. (2025). Experimental investigation on surface modification of AA5754 alloy in electrical discharge coating using Cu–W composite electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
Barik, E. S., Jena, P. C., Behera, R. K., Sethy, S., & Das, S. R. (2025). Experimental investigation and sustainability assessment in turning of newly developed AMMC (Al–Mg–Si–Cu–SiC) using coated carbide tool under minimum quantity lubrication. Arabian Journal for Science and Engineering, 50(22), 18777–18798.
Sarangi, S., Behera, A. K., Bajpai, S., Sahoo, S., Sethy, S., & Das, S. R. (2025). Application of tri-vector analysis to identify the optimum coating thickness in induced draft fans. Surface Review and Letters, 32(10), 2450133.
Padhan, S., Das, A., & Das, S. R. (2025). Analysis, modelling and optimization on tool vibration in machining of Nitronic 60 with SiAlON ceramic tool. Advances in Materials and Processing Technologies, 11(4), 3926–3939.
Mahapatra, S., Das, A., Roy, S., Jena, P. C., Babu, M. N., & Das, S. R. (2025). Hard turning of AISI H13 steel with AlTiSiN coated carbide tool using MWCNT-based nanofluid under minimum quantity lubrication: Experimental investigation and sustainability assessment. Sādhanā, 50(3), 197.
Swain, S., Roy, S., Das, A., & Das, S. R. (2025). Investigation on flank wear, surface roughness and chip morphology in turning of AISI D7 steel with AlTiSiN coated carbide tool using zinc oxide enriched nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Nanda, A., Das, S. R., Padhan, S., Dash, L., & Rout, B. (2025). Experimental investigation, modeling, and optimization of power consumption and surface roughness in 3D printing of PLA. Surface Review and Letters, 2550199.
Padhan, S., Mishra, S., Sahu, S. K., Das, A., Das, S. R., & Mohapatra, S. (2025). Enhancing machining performance and sustainability: A comprehensive review of minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
Das, A., Barrenkala, D., Das, S. R., Patel, S. K., Somani, N., & Kumar, C. S. (2025). Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Das, A., Gautam, A., Panda, A., Das, S. R., Debnath, K., & Ramakrishna, C. (2025). Comparative performance evaluation between uncoated and TiAlN + AlCrN coated carbide tools in hard turning of AISI H11 steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Sethy, S., Das, S. R., Rana, J., Behera, A. K., & Gupta, M. K. (2025). Performance evaluation and economic assessment in electrical discharge machining of SS316 using graphite powder dispersed in biodegradable palm oil dielectric. Surface Review and Letters, 32(03), 2450120.
Roy, S., Das, A., Kumar, R., Das, S. R., Rafighi, M., & Sharma, P. (2025). Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on performance and sustainability assessment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Das, A., Mohapatra, S., Gajrani, K. K., Das, S. R., & Patel, S. K. (2025). Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Kirankumar, B., Siva, K., Siva Satya Mohan, K., Ranjan, V. K., Das, S., & Sharmaa, P. (2025). Advancing Wire Electrical Discharge Machining of AISI P20+ Ni Steel Using Hybrid Deep Belief Neural Network-Search and Rescue Optimization Algorithm. Int. J. Vehicle Structures & Systems, 17(1), 120-126.
Padhan, S., Mohapatra, J. J., Mishra, L., Rout, A. K., & Das, S. R. (2025). Statistical investigation of power consumption in dry turning of stir-cast Al7075-SiC-Gr metal matrix composites. Materials Science Forum, 1171, 19–27.
Ajaya, B., Sahu, S. K., Jena, P. C., Das, S. R., & Dhupal, D. (2025). Experimental investigation and optimization on surface roughness and material deposition rate in electrical discharge coating of AA5754 alloy using Cu-W composite electrode. Journal of Materials Engineering and Performance, 1–22.
Ghadei, B. P., Dhupal, D., Sahu, S. K., Jena, P. C., Das, A., & Das, S. R. (2025). Experimental investigation on surface modification of AA5754 alloy in electrical discharge coating using Cu–W composite electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
Barik, E. S., Jena, P. C., Behera, R. K., Sethy, S., & Das, S. R. (2025). Experimental investigation and sustainability assessment in turning of newly developed AMMC (Al–Mg–Si–Cu–SiC) using coated carbide tool under minimum quantity lubrication. Arabian Journal for Science and Engineering, 50(22), 18777–18798.
Sarangi, S., Behera, A. K., Bajpai, S., Sahoo, S., Sethy, S., & Das, S. R. (2025). Application of tri-vector analysis to identify the optimum coating thickness in induced draft fans. Surface Review and Letters, 32(10), 2450133.
Padhan, S., Das, A., & Das, S. R. (2025). Analysis, modelling and optimization on tool vibration in machining of Nitronic 60 with SiAlON ceramic tool. Advances in Materials and Processing Technologies, 11(4), 3926–3939.
Mahapatra, S., Das, A., Roy, S., Jena, P. C., Babu, M. N., & Das, S. R. (2025). Hard turning of AISI H13 steel with AlTiSiN coated carbide tool using MWCNT-based nanofluid under minimum quantity lubrication: Experimental investigation and sustainability assessment. Sādhanā, 50(3), 197.
Swain, S., Roy, S., Das, A., & Das, S. R. (2025). Investigation on flank wear, surface roughness and chip morphology in turning of AISI D7 steel with AlTiSiN coated carbide tool using zinc oxide enriched nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Nanda, A., Das, S. R., Padhan, S., Dash, L., & Rout, B. (2025). Experimental investigation, modeling, and optimization of power consumption and surface roughness in 3D printing of PLA. Surface Review and Letters, 2550199.
Padhan, S., Mishra, S., Sahu, S. K., Das, A., Das, S. R., & Mohapatra, S. (2025). Enhancing machining performance and sustainability: A comprehensive review of minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
Das, A., Barrenkala, D., Das, S. R., Patel, S. K., Somani, N., & Kumar, C. S. (2025). Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Das, A., Gautam, A., Panda, A., Das, S. R., Debnath, K., & Ramakrishna, C. (2025). Comparative performance evaluation between uncoated and TiAlN + AlCrN coated carbide tools in hard turning of AISI H11 steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Sethy, S., Das, S. R., Rana, J., Behera, A. K., & Gupta, M. K. (2025). Performance evaluation and economic assessment in electrical discharge machining of SS316 using graphite powder dispersed in biodegradable palm oil dielectric. Surface Review and Letters, 32(03), 2450120.
Roy, S., Das, A., Kumar, R., Das, S. R., Rafighi, M., & Sharma, P. (2025). Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on performance and sustainability assessment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Das, A., Mohapatra, S., Gajrani, K. K., Das, S. R., & Patel, S. K. (2025). Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Kirankumar, B., Siva, K., Siva Satya Mohan, K., Ranjan, V. K., Das, S., & Sharmaa, P. (2025). Advancing Wire Electrical Discharge Machining of AISI P20+ Ni Steel Using Hybrid Deep Belief Neural Network-Search and Rescue Optimization Algorithm. Int. J. Vehicle Structures & Systems, 17(1), 120-126.
Padhan, S., Mohapatra, J. J., Mishra, L., Rout, A. K., & Das, S. R. (2025). Statistical investigation of power consumption in dry turning of stir-cast Al7075-SiC-Gr metal matrix composites. Materials Science Forum, 1171, 19–27.
Ajaya, B., Sahu, S. K., Jena, P. C., Das, S. R., & Dhupal, D. (2025). Experimental investigation and optimization on surface roughness and material deposition rate in electrical discharge coating of AA5754 alloy using Cu-W composite electrode. Journal of Materials Engineering and Performance, 1–22.
Ghadei, B. P., Dhupal, D., Sahu, S. K., Jena, P. C., Das, A., & Das, S. R. (2025). Experimental investigation on surface modification of AA5754 alloy in electrical discharge coating using Cu–W composite electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
Barik, E. S., Jena, P. C., Behera, R. K., Sethy, S., & Das, S. R. (2025). Experimental investigation and sustainability assessment in turning of newly developed AMMC (Al–Mg–Si–Cu–SiC) using coated carbide tool under minimum quantity lubrication. Arabian Journal for Science and Engineering, 50(22), 18777–18798.
Sarangi, S., Behera, A. K., Bajpai, S., Sahoo, S., Sethy, S., & Das, S. R. (2025). Application of tri-vector analysis to identify the optimum coating thickness in induced draft fans. Surface Review and Letters, 32(10), 2450133.
Padhan, S., Das, A., & Das, S. R. (2025). Analysis, modelling and optimization on tool vibration in machining of Nitronic 60 with SiAlON ceramic tool. Advances in Materials and Processing Technologies, 11(4), 3926–3939.
Mahapatra, S., Das, A., Roy, S., Jena, P. C., Babu, M. N., & Das, S. R. (2025). Hard turning of AISI H13 steel with AlTiSiN coated carbide tool using MWCNT-based nanofluid under minimum quantity lubrication: Experimental investigation and sustainability assessment. Sādhanā, 50(3), 197.
Swain, S., Roy, S., Das, A., & Das, S. R. (2025). Investigation on flank wear, surface roughness and chip morphology in turning of AISI D7 steel with AlTiSiN coated carbide tool using zinc oxide enriched nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Nanda, A., Das, S. R., Padhan, S., Dash, L., & Rout, B. (2025). Experimental investigation, modeling, and optimization of power consumption and surface roughness in 3D printing of PLA. Surface Review and Letters, 2550199.
Padhan, S., Mishra, S., Sahu, S. K., Das, A., Das, S. R., & Mohapatra, S. (2025). Enhancing machining performance and sustainability: A comprehensive review of minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
Das, A., Barrenkala, D., Das, S. R., Patel, S. K., Somani, N., & Kumar, C. S. (2025). Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Das, A., Gautam, A., Panda, A., Das, S. R., Debnath, K., & Ramakrishna, C. (2025). Comparative performance evaluation between uncoated and TiAlN + AlCrN coated carbide tools in hard turning of AISI H11 steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Sethy, S., Das, S. R., Rana, J., Behera, A. K., & Gupta, M. K. (2025). Performance evaluation and economic assessment in electrical discharge machining of SS316 using graphite powder dispersed in biodegradable palm oil dielectric. Surface Review and Letters, 32(03), 2450120.
Roy, S., Das, A., Kumar, R., Das, S. R., Rafighi, M., & Sharma, P. (2025). Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on performance and sustainability assessment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Das, A., Mohapatra, S., Gajrani, K. K., Das, S. R., & Patel, S. K. (2025). Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Kirankumar, B., Siva, K., Siva Satya Mohan, K., Ranjan, V. K., Das, S., & Sharmaa, P. (2025). Advancing Wire Electrical Discharge Machining of AISI P20+ Ni Steel Using Hybrid Deep Belief Neural Network-Search and Rescue Optimization Algorithm. Int. J. Vehicle Structures & Systems, 17(1), 120-126.
Padhan, S., Mohapatra, J. J., Mishra, L., Rout, A. K., & Das, S. R. (2025). Statistical investigation of power consumption in dry turning of stir-cast Al7075-SiC-Gr metal matrix composites. Materials Science Forum, 1171, 19–27.
Ajaya, B., Sahu, S. K., Jena, P. C., Das, S. R., & Dhupal, D. (2025). Experimental investigation and optimization on surface roughness and material deposition rate in electrical discharge coating of AA5754 alloy using Cu-W composite electrode. Journal of Materials Engineering and Performance, 1–22.
Ghadei, B. P., Dhupal, D., Sahu, S. K., Jena, P. C., Das, A., & Das, S. R. (2025). Experimental investigation on surface modification of AA5754 alloy in electrical discharge coating using Cu–W composite electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
Barik, E. S., Jena, P. C., Behera, R. K., Sethy, S., & Das, S. R. (2025). Experimental investigation and sustainability assessment in turning of newly developed AMMC (Al–Mg–Si–Cu–SiC) using coated carbide tool under minimum quantity lubrication. Arabian Journal for Science and Engineering, 50(22), 18777–18798.
Sarangi, S., Behera, A. K., Bajpai, S., Sahoo, S., Sethy, S., & Das, S. R. (2025). Application of tri-vector analysis to identify the optimum coating thickness in induced draft fans. Surface Review and Letters, 32(10), 2450133.
Padhan, S., Das, A., & Das, S. R. (2025). Analysis, modelling and optimization on tool vibration in machining of Nitronic 60 with SiAlON ceramic tool. Advances in Materials and Processing Technologies, 11(4), 3926–3939.
Mahapatra, S., Das, A., Roy, S., Jena, P. C., Babu, M. N., & Das, S. R. (2025). Hard turning of AISI H13 steel with AlTiSiN coated carbide tool using MWCNT-based nanofluid under minimum quantity lubrication: Experimental investigation and sustainability assessment. Sādhanā, 50(3), 197.
Swain, S., Roy, S., Das, A., & Das, S. R. (2025). Investigation on flank wear, surface roughness and chip morphology in turning of AISI D7 steel with AlTiSiN coated carbide tool using zinc oxide enriched nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Nanda, A., Das, S. R., Padhan, S., Dash, L., & Rout, B. (2025). Experimental investigation, modeling, and optimization of power consumption and surface roughness in 3D printing of PLA. Surface Review and Letters, 2550199.
Padhan, S., Mishra, S., Sahu, S. K., Das, A., Das, S. R., & Mohapatra, S. (2025). Enhancing machining performance and sustainability: A comprehensive review of minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
Das, A., Barrenkala, D., Das, S. R., Patel, S. K., Somani, N., & Kumar, C. S. (2025). Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Das, A., Gautam, A., Panda, A., Das, S. R., Debnath, K., & Ramakrishna, C. (2025). Comparative performance evaluation between uncoated and TiAlN + AlCrN coated carbide tools in hard turning of AISI H11 steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Sethy, S., Das, S. R., Rana, J., Behera, A. K., & Gupta, M. K. (2025). Performance evaluation and economic assessment in electrical discharge machining of SS316 using graphite powder dispersed in biodegradable palm oil dielectric. Surface Review and Letters, 32(03), 2450120.
Roy, S., Das, A., Kumar, R., Das, S. R., Rafighi, M., & Sharma, P. (2025). Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on performance and sustainability assessment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Das, A., Mohapatra, S., Gajrani, K. K., Das, S. R., & Patel, S. K. (2025). Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Kirankumar, B., Siva, K., Siva Satya Mohan, K., Ranjan, V. K., Das, S., & Sharmaa, P. (2025). Advancing Wire Electrical Discharge Machining of AISI P20+ Ni Steel Using Hybrid Deep Belief Neural Network-Search and Rescue Optimization Algorithm. Int. J. Vehicle Structures & Systems, 17(1), 120-126.
Padhan, S., Mohapatra, J. J., Mishra, L., Rout, A. K., & Das, S. R. (2025). Statistical investigation of power consumption in dry turning of stir-cast Al7075-SiC-Gr metal matrix composites. Materials Science Forum, 1171, 19–27.
Ajaya, B., Sahu, S. K., Jena, P. C., Das, S. R., & Dhupal, D. (2025). Experimental investigation and optimization on surface roughness and material deposition rate in electrical discharge coating of AA5754 alloy using Cu-W composite electrode. Journal of Materials Engineering and Performance, 1–22.
Ghadei, B. P., Dhupal, D., Sahu, S. K., Jena, P. C., Das, A., & Das, S. R. (2025). Experimental investigation on surface modification of AA5754 alloy in electrical discharge coating using Cu–W composite electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
Barik, E. S., Jena, P. C., Behera, R. K., Sethy, S., & Das, S. R. (2025). Experimental investigation and sustainability assessment in turning of newly developed AMMC (Al–Mg–Si–Cu–SiC) using coated carbide tool under minimum quantity lubrication. Arabian Journal for Science and Engineering, 50(22), 18777–18798.
Sarangi, S., Behera, A. K., Bajpai, S., Sahoo, S., Sethy, S., & Das, S. R. (2025). Application of tri-vector analysis to identify the optimum coating thickness in induced draft fans. Surface Review and Letters, 32(10), 2450133.
Padhan, S., Das, A., & Das, S. R. (2025). Analysis, modelling and optimization on tool vibration in machining of Nitronic 60 with SiAlON ceramic tool. Advances in Materials and Processing Technologies, 11(4), 3926–3939.
Mahapatra, S., Das, A., Roy, S., Jena, P. C., Babu, M. N., & Das, S. R. (2025). Hard turning of AISI H13 steel with AlTiSiN coated carbide tool using MWCNT-based nanofluid under minimum quantity lubrication: Experimental investigation and sustainability assessment. Sādhanā, 50(3), 197.
Swain, S., Roy, S., Das, A., & Das, S. R. (2025). Investigation on flank wear, surface roughness and chip morphology in turning of AISI D7 steel with AlTiSiN coated carbide tool using zinc oxide enriched nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Nanda, A., Das, S. R., Padhan, S., Dash, L., & Rout, B. (2025). Experimental investigation, modeling, and optimization of power consumption and surface roughness in 3D printing of PLA. Surface Review and Letters, 2550199.
Padhan, S., Mishra, S., Sahu, S. K., Das, A., Das, S. R., & Mohapatra, S. (2025). Enhancing machining performance and sustainability: A comprehensive review of minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
Das, A., Barrenkala, D., Das, S. R., Patel, S. K., Somani, N., & Kumar, C. S. (2025). Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Das, A., Gautam, A., Panda, A., Das, S. R., Debnath, K., & Ramakrishna, C. (2025). Comparative performance evaluation between uncoated and TiAlN + AlCrN coated carbide tools in hard turning of AISI H11 steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Sethy, S., Das, S. R., Rana, J., Behera, A. K., & Gupta, M. K. (2025). Performance evaluation and economic assessment in electrical discharge machining of SS316 using graphite powder dispersed in biodegradable palm oil dielectric. Surface Review and Letters, 32(03), 2450120.
Roy, S., Das, A., Kumar, R., Das, S. R., Rafighi, M., & Sharma, P. (2025). Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on performance and sustainability assessment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Das, A., Mohapatra, S., Gajrani, K. K., Das, S. R., & Patel, S. K. (2025). Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
Kirankumar, B., Siva, K., Siva Satya Mohan, K., Ranjan, V. K., Das, S., & Sharmaa, P. (2025). Advancing Wire Electrical Discharge Machining of AISI P20+ Ni Steel Using Hybrid Deep Belief Neural Network-Search and Rescue Optimization Algorithm. Int. J. Vehicle Structures & Systems, 17(1), 120-126.
4. Padhan, S., Mohapatra, J. J., Mishra, L., Rout, A. K., & Das, S. R. (2025). Statistical investigation of power consumption in dry turning of stir-cast Al7075-SiC-Gr metal matrix composites. Materials Science Forum, 1171, 19–27.
5. Ajaya, B., Sahu, S. K., Jena, P. C., Das, S. R., & Dhupal, D. (2025). Experimental investigation and optimization on surface roughness and material deposition rate in electrical discharge coating of AA5754 alloy using Cu-W composite electrode. Journal of Materials Engineering and Performance, 1–22.
6. Ghadei, B. P., Dhupal, D., Sahu, S. K., Jena, P. C., Das, A., & Das, S. R. (2025). Experimental investigation on surface modification of AA5754 alloy in electrical discharge coating using Cu–W composite electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
7. Barik, E. S., Jena, P. C., Behera, R. K., Sethy, S., & Das, S. R. (2025). Experimental investigation and sustainability assessment in turning of newly developed AMMC (Al–Mg–Si–Cu–SiC) using coated carbide tool under minimum quantity lubrication. Arabian Journal for Science and Engineering, 50(22), 18777–18798.
8. Sarangi, S., Behera, A. K., Bajpai, S., Sahoo, S., Sethy, S., & Das, S. R. (2025). Application of tri-vector analysis to identify the optimum coating thickness in induced draft fans. Surface Review and Letters, 32(10), 2450133.
9. Padhan, S., Das, A., & Das, S. R. (2025). Analysis, modelling and optimization on tool vibration in machining of Nitronic 60 with SiAlON ceramic tool. Advances in Materials and Processing Technologies, 11(4), 3926–3939.
10. Mahapatra, S., Das, A., Roy, S., Jena, P. C., Babu, M. N., & Das, S. R. (2025). Hard turning of AISI H13 steel with AlTiSiN coated carbide tool using MWCNT-based nanofluid under minimum quantity lubrication: Experimental investigation and sustainability assessment. Sādhanā, 50(3), 197.
11. Swain, S., Roy, S., Das, A., & Das, S. R. (2025). Investigation on flank wear, surface roughness and chip morphology in turning of AISI D7 steel with AlTiSiN coated carbide tool using zinc oxide enriched nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
12. Nanda, A., Das, S. R., Padhan, S., Dash, L., & Rout, B. (2025). Experimental investigation, modeling, and optimization of power consumption and surface roughness in 3D printing of PLA. Surface Review and Letters, 2550199.
13. Padhan, S., Mishra, S., Sahu, S. K., Das, A., Das, S. R., & Mohapatra, S. (2025). Enhancing machining performance and sustainability: A comprehensive review of minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
14. Das, A., Barrenkala, D., Das, S. R., Patel, S. K., Somani, N., & Kumar, C. S. (2025). Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
15. Das, A., Gautam, A., Panda, A., Das, S. R., Debnath, K., & Ramakrishna, C. (2025). Comparative performance evaluation between uncoated and TiAlN + AlCrN coated carbide tools in hard turning of AISI H11 steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
16. Sethy, S., Das, S. R., Rana, J., Behera, A. K., & Gupta, M. K. (2025). Performance evaluation and economic assessment in electrical discharge machining of SS316 using graphite powder dispersed in biodegradable palm oil dielectric. Surface Review and Letters, 32(03), 2450120.
17. Roy, S., Das, A., Kumar, R., Das, S. R., Rafighi, M., & Sharma, P. (2025). Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on performance and sustainability assessment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
18. Das, A., Mohapatra, S., Gajrani, K. K., Das, S. R., & Patel, S. K. (2025). Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
19. Kirankumar, B., Siva, K., Siva Satya Mohan, K., Ranjan, V. K., Das, S., & Sharmaa, P. (2025). Advancing Wire Electrical Discharge Machining of AISI P20+ Ni Steel Using Hybrid Deep Belief Neural Network-Search and Rescue Optimization Algorithm. Int. J. Vehicle Structures & Systems, 17(1), 120-126.
4. Padhan, S., Mohapatra, J. J., Mishra, L., Rout, A. K., & Das, S. R. (2025). Statistical investigation of power consumption in dry turning of stir-cast Al7075-SiC-Gr metal matrix composites. Materials Science Forum, 1171, 19–27.
5. Ajaya, B., Sahu, S. K., Jena, P. C., Das, S. R., & Dhupal, D. (2025). Experimental investigation and optimization on surface roughness and material deposition rate in electrical discharge coating of AA5754 alloy using Cu-W composite electrode. Journal of Materials Engineering and Performance, 1–22.
6. Ghadei, B. P., Dhupal, D., Sahu, S. K., Jena, P. C., Das, A., & Das, S. R. (2025). Experimental investigation on surface modification of AA5754 alloy in electrical discharge coating using Cu–W composite electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
7. Barik, E. S., Jena, P. C., Behera, R. K., Sethy, S., & Das, S. R. (2025). Experimental investigation and sustainability assessment in turning of newly developed AMMC (Al–Mg–Si–Cu–SiC) using coated carbide tool under minimum quantity lubrication. Arabian Journal for Science and Engineering, 50(22), 18777–18798.
8. Sarangi, S., Behera, A. K., Bajpai, S., Sahoo, S., Sethy, S., & Das, S. R. (2025). Application of tri-vector analysis to identify the optimum coating thickness in induced draft fans. Surface Review and Letters, 32(10), 2450133.
9. Padhan, S., Das, A., & Das, S. R. (2025). Analysis, modelling and optimization on tool vibration in machining of Nitronic 60 with SiAlON ceramic tool. Advances in Materials and Processing Technologies, 11(4), 3926–3939.
10. Mahapatra, S., Das, A., Roy, S., Jena, P. C., Babu, M. N., & Das, S. R. (2025). Hard turning of AISI H13 steel with AlTiSiN coated carbide tool using MWCNT-based nanofluid under minimum quantity lubrication: Experimental investigation and sustainability assessment. Sādhanā, 50(3), 197.
11. Swain, S., Roy, S., Das, A., & Das, S. R. (2025). Investigation on flank wear, surface roughness and chip morphology in turning of AISI D7 steel with AlTiSiN coated carbide tool using zinc oxide enriched nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
12. Nanda, A., Das, S. R., Padhan, S., Dash, L., & Rout, B. (2025). Experimental investigation, modeling, and optimization of power consumption and surface roughness in 3D printing of PLA. Surface Review and Letters, 2550199.
13. Padhan, S., Mishra, S., Sahu, S. K., Das, A., Das, S. R., & Mohapatra, S. (2025). Enhancing machining performance and sustainability: A comprehensive review of minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 47.
14. Das, A., Barrenkala, D., Das, S. R., Patel, S. K., Somani, N., & Kumar, C. S. (2025). Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
15. Das, A., Gautam, A., Panda, A., Das, S. R., Debnath, K., & Ramakrishna, C. (2025). Comparative performance evaluation between uncoated and TiAlN + AlCrN coated carbide tools in hard turning of AISI H11 steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
16. Sethy, S., Das, S. R., Rana, J., Behera, A. K., & Gupta, M. K. (2025). Performance evaluation and economic assessment in electrical discharge machining of SS316 using graphite powder dispersed in biodegradable palm oil dielectric. Surface Review and Letters, 32(03), 2450120.
17. Roy, S., Das, A., Kumar, R., Das, S. R., Rafighi, M., & Sharma, P. (2025). Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on performance and sustainability assessment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
18. Das, A., Mohapatra, S., Gajrani, K. K., Das, S. R., & Patel, S. K. (2025). Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.
19. Kirankumar, B., Siva, K., Siva Satya Mohan, K., Ranjan, V. K., Das, S., & Sharmaa, P. (2025). Advancing Wire Electrical Discharge Machining of AISI P20+ Ni Steel Using Hybrid Deep Belief Neural Network-Search and Rescue Optimization Algorithm. Int. J. Vehicle Structures & Systems, 17(1), 120-126.
A. Biswal, S. S. Purohit, L. Mishra, M. Mishra, B. R. Routray, S. B. Biswal, S. Nayak, B. C. Behera and S. K. Swain* “Nano CaCO3 mediated in vitro and in vivo wound healing characteristics of chitosan films without added drugs” International Journal of Biological Macromolecules, (Elsevier), 142057 (2025). (Impact Factor: 8.5), ISSN: 1879-0003 DOI: https://doi.org/10.1016/j.ijbiomac.2025.142057
S. S. Purohit, A. Biswal, P. Mohapatra, O. Khamari, K. Dash, M. Mishra, S. B. Biswal, S. Nayak and S. K. Swain* “Lysozyme/N-GQD loaded carboxymethyl cellulose hydrogels for healing of excision wounds in Drosophila and Sprague Dawley rats” International Journal of Biological Macromolecules, (Elsevier) 141638 (2025). (Impact Factor: 8.5). ISSN: 1879-0003 DOI: https://doi.org/10.1016/j.ijbiomac.2025.141638
S. K. Das, D. Bharatiya, S. Minz, R. Saraswat and S. K. Swain* “Effect of clay on dielectric behaviour of TiO2 embedded PVDF nanocomposite for charge storage applications” Materials Science in Semiconductor Processing, (Elsevier) 192, 109480 (2025). (Impact Factor: 4.6) ISSN: 1369-8001 DOI: https://doi.org/10.1016/j.mssp.2025.109480
S. Swain, S. Patra, S. Panigrahi, A. Biswal, P. Mohapatra and S. K. Swain* “Rhodamine B embedded silver nanogranules for selective sensing of L-cysteine” Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 330, 125722 (2025). (Impact Factor: 4.6), ISSN: 1386-1425 DOI: https://doi.org/10.1016/j.saa.2025.125722
K. M. Sahu, S. Patra, K. P. Nayak and S. K. Swain* “Host-guest mediated controlled release of 5-fluorouracil by CQD integrated starch based smart tripolymeric hydrogel” International Journal of Biological Macromolecules, 146419 (2025). (Impact Factor: 8.5), ISSN: 1879-0003 https://doi.org/10.1016/j.ijbiomac.2025.146419
S. Swain, A. Biswal, P. Mohapatra and S. K. Swain* “Polyurethane nanocomposite for gas separation: A review” Polymer-Plastics Technology and Materials, 64(13), 1979–2003 (2025). (Impact Factor: 3.0), ISSN: 2574-0881 DOI: https://doi.org/10.1080/25740881.2025.2491552
S. Patra, B. Jena, B. Patra and S. K. Swain* “Multifunctional h-BN/TiO₂ reinforced polyaniline/PVA nanocomposite films for smart antibacterial and flame retardant packaging” Materials Today Communications, 113933 (2025). (Impact Factor: 4.5), ISSN: 2352-4928 DOI: https://doi.org/10.1016/j.mtcomm.2025.113933
A. Biswal, S. Swain, R. Mishra, A. Biswal and S. K. Swain* “Graphene based nanocomposites: A state of the art in heavy metal detection” Microchemical Journal, 115587 (2025). (Impact Factor: 5.1), ISSN: 0026-265X DOI: https://doi.org/10.1016/j.microc.2025.115587
P K Behera, D Sahu, B R Jali, A K Barick, S K Swain and P Mohapatra* “A Simple Method for Synthesizing Nitrogen-Doped Carbon Quantum Dots for Fluorescent “Turn off” Mercury (II) Ion Sensing” Journal of Fluorescence (Springer) 35(3), 1685-1694. (2025), (Impact Factor: 3.1), ISBN: 1573-4994. DOI: DOI: https://doi.org/10.1007/s10895-024-03649-1
A. Biswal, S. S. Purohit, L. Mishra, M. Mishra, B. R. Routray, S. B. Biswal, S. Nayak, B. C. Behera and S. K. Swain* “Nano CaCO3 mediated in vitro and in vivo wound healing characteristics of chitosan films without added drugs” International Journal of Biological Macromolecules, (Elsevier), 142057 (2025). (Impact Factor: 8.5), ISSN: 1879-0003 DOI: https://doi.org/10.1016/j.ijbiomac.2025.142057
S. S. Purohit, A. Biswal, P. Mohapatra, O. Khamari, K. Dash, M. Mishra, S. B. Biswal, S. Nayak and S. K. Swain* “Lysozyme/N-GQD loaded carboxymethyl cellulose hydrogels for healing of excision wounds in Drosophila and Sprague Dawley rats” International Journal of Biological Macromolecules, (Elsevier) 141638 (2025). (Impact Factor: 8.5). ISSN: 1879-0003 DOI: https://doi.org/10.1016/j.ijbiomac.2025.141638
S. K. Das, D. Bharatiya, S. Minz, R. Saraswat and S. K. Swain* “Effect of clay on dielectric behaviour of TiO2 embedded PVDF nanocomposite for charge storage applications” Materials Science in Semiconductor Processing, (Elsevier) 192, 109480 (2025). (Impact Factor: 4.6) ISSN: 1369-8001 DOI: https://doi.org/10.1016/j.mssp.2025.109480
S. Swain, S. Patra, S. Panigrahi, A. Biswal, P. Mohapatra and S. K. Swain* “Rhodamine B embedded silver nanogranules for selective sensing of L-cysteine” Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 330, 125722 (2025). (Impact Factor: 4.6), ISSN: 1386-1425 DOI: https://doi.org/10.1016/j.saa.2025.125722
K. M. Sahu, S. Patra, K. P. Nayak and S. K. Swain* “Host-guest mediated controlled release of 5-fluorouracil by CQD integrated starch based smart tripolymeric hydrogel” International Journal of Biological Macromolecules, 146419 (2025). (Impact Factor: 8.5), ISSN: 1879-0003 https://doi.org/10.1016/j.ijbiomac.2025.146419
S. Swain, A. Biswal, P. Mohapatra and S. K. Swain* “Polyurethane nanocomposite for gas separation: A review” Polymer-Plastics Technology and Materials, 64(13), 1979–2003 (2025). (Impact Factor: 3.0), ISSN: 2574-0881 DOI: https://doi.org/10.1080/25740881.2025.2491552
S. Patra, B. Jena, B. Patra and S. K. Swain* “Multifunctional h-BN/TiO₂ reinforced polyaniline/PVA nanocomposite films for smart antibacterial and flame retardant packaging” Materials Today Communications, 113933 (2025). (Impact Factor: 4.5), ISSN: 2352-4928 DOI: https://doi.org/10.1016/j.mtcomm.2025.113933
A. Biswal, S. Swain, R. Mishra, A. Biswal and S. K. Swain* “Graphene based nanocomposites: A state of the art in heavy metal detection” Microchemical Journal, 115587 (2025). (Impact Factor: 5.1), ISSN: 0026-265X DOI: https://doi.org/10.1016/j.microc.2025.115587
P K Behera, D Sahu, B R Jali, A K Barick, S K Swain and P Mohapatra* “A Simple Method for Synthesizing Nitrogen-Doped Carbon Quantum Dots for Fluorescent “Turn off” Mercury (II) Ion Sensing” Journal of Fluorescence (Springer) 35(3), 1685-1694. (2025), (Impact Factor: 3.1), ISBN: 1573-4994. DOI: DOI: https://doi.org/10.1007/s10895-024-03649-1
A. Biswal, S. S. Purohit, L. Mishra, M. Mishra, B. R. Routray, S. B. Biswal, S. Nayak, B. C. Behera and S. K. Swain* “Nano CaCO3 mediated in vitro and in vivo wound healing characteristics of chitosan films without added drugs” International Journal of Biological Macromolecules, (Elsevier), 142057 (2025). (Impact Factor: 8.5), ISSN: 1879-0003 DOI: https://doi.org/10.1016/j.ijbiomac.2025.142057
S. S. Purohit, A. Biswal, P. Mohapatra, O. Khamari, K. Dash, M. Mishra, S. B. Biswal, S. Nayak and S. K. Swain* “Lysozyme/N-GQD loaded carboxymethyl cellulose hydrogels for healing of excision wounds in Drosophila and Sprague Dawley rats” International Journal of Biological Macromolecules, (Elsevier) 141638 (2025). (Impact Factor: 8.5). ISSN: 1879-0003 DOI: https://doi.org/10.1016/j.ijbiomac.2025.141638
S. K. Das, D. Bharatiya, S. Minz, R. Saraswat and S. K. Swain* “Effect of clay on dielectric behaviour of TiO2 embedded PVDF nanocomposite for charge storage applications” Materials Science in Semiconductor Processing, (Elsevier) 192, 109480 (2025). (Impact Factor: 4.6) ISSN: 1369-8001 DOI: https://doi.org/10.1016/j.mssp.2025.109480
S. Swain, S. Patra, S. Panigrahi, A. Biswal, P. Mohapatra and S. K. Swain* “Rhodamine B embedded silver nanogranules for selective sensing of L-cysteine” Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 330, 125722 (2025). (Impact Factor: 4.6), ISSN: 1386-1425 DOI: https://doi.org/10.1016/j.saa.2025.125722
K. M. Sahu, S. Patra, K. P. Nayak and S. K. Swain* “Host-guest mediated controlled release of 5-fluorouracil by CQD integrated starch based smart tripolymeric hydrogel” International Journal of Biological Macromolecules, 146419 (2025). (Impact Factor: 8.5), ISSN: 1879-0003 https://doi.org/10.1016/j.ijbiomac.2025.146419
S. Swain, A. Biswal, P. Mohapatra and S. K. Swain* “Polyurethane nanocomposite for gas separation: A review” Polymer-Plastics Technology and Materials, 64(13), 1979–2003 (2025). (Impact Factor: 3.0), ISSN: 2574-0881 DOI: https://doi.org/10.1080/25740881.2025.2491552
S. Patra, B. Jena, B. Patra and S. K. Swain* “Multifunctional h-BN/TiO₂ reinforced polyaniline/PVA nanocomposite films for smart antibacterial and flame retardant packaging” Materials Today Communications, 113933 (2025). (Impact Factor: 4.5), ISSN: 2352-4928 DOI: https://doi.org/10.1016/j.mtcomm.2025.113933
A. Biswal, S. Swain, R. Mishra, A. Biswal and S. K. Swain* “Graphene based nanocomposites: A state of the art in heavy metal detection” Microchemical Journal, 115587 (2025). (Impact Factor: 5.1), ISSN: 0026-265X DOI: https://doi.org/10.1016/j.microc.2025.115587
P K Behera, D Sahu, B R Jali, A K Barick, S K Swain and P Mohapatra* “A Simple Method for Synthesizing Nitrogen-Doped Carbon Quantum Dots for Fluorescent “Turn off” Mercury (II) Ion Sensing” Journal of Fluorescence (Springer) 35(3), 1685-1694. (2025), (Impact Factor: 3.1), ISBN: 1573-4994. DOI: DOI: https://doi.org/10.1007/s10895-024-03649-1
A. Biswal, S. S. Purohit, L. Mishra, M. Mishra, B. R. Routray, S. B. Biswal, S. Nayak, B. C. Behera and S. K. Swain* “Nano CaCO3 mediated in vitro and in vivo wound healing characteristics of chitosan films without added drugs” International Journal of Biological Macromolecules, (Elsevier), 142057 (2025). (Impact Factor: 8.5), ISSN: 1879-0003 DOI: https://doi.org/10.1016/j.ijbiomac.2025.142057
S. S. Purohit, A. Biswal, P. Mohapatra, O. Khamari, K. Dash, M. Mishra, S. B. Biswal, S. Nayak and S. K. Swain* “Lysozyme/N-GQD loaded carboxymethyl cellulose hydrogels for healing of excision wounds in Drosophila and Sprague Dawley rats” International Journal of Biological Macromolecules, (Elsevier) 141638 (2025). (Impact Factor: 8.5). ISSN: 1879-0003 DOI: https://doi.org/10.1016/j.ijbiomac.2025.141638
S. K. Das, D. Bharatiya, S. Minz, R. Saraswat and S. K. Swain* “Effect of clay on dielectric behaviour of TiO2 embedded PVDF nanocomposite for charge storage applications” Materials Science in Semiconductor Processing, (Elsevier) 192, 109480 (2025). (Impact Factor: 4.6) ISSN: 1369-8001 DOI: https://doi.org/10.1016/j.mssp.2025.109480
S. Swain, S. Patra, S. Panigrahi, A. Biswal, P. Mohapatra and S. K. Swain* “Rhodamine B embedded silver nanogranules for selective sensing of L-cysteine” Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 330, 125722 (2025). (Impact Factor: 4.6), ISSN: 1386-1425 DOI: https://doi.org/10.1016/j.saa.2025.125722
K. M. Sahu, S. Patra, K. P. Nayak and S. K. Swain* “Host-guest mediated controlled release of 5-fluorouracil by CQD integrated starch based smart tripolymeric hydrogel” International Journal of Biological Macromolecules, 146419 (2025). (Impact Factor: 8.5), ISSN: 1879-0003 https://doi.org/10.1016/j.ijbiomac.2025.146419
S. Swain, A. Biswal, P. Mohapatra and S. K. Swain* “Polyurethane nanocomposite for gas separation: A review” Polymer-Plastics Technology and Materials, 64(13), 1979–2003 (2025). (Impact Factor: 3.0), ISSN: 2574-0881 DOI: https://doi.org/10.1080/25740881.2025.2491552
S. Patra, B. Jena, B. Patra and S. K. Swain* “Multifunctional h-BN/TiO₂ reinforced polyaniline/PVA nanocomposite films for smart antibacterial and flame retardant packaging” Materials Today Communications, 113933 (2025). (Impact Factor: 4.5), ISSN: 2352-4928 DOI: https://doi.org/10.1016/j.mtcomm.2025.113933
A. Biswal, S. Swain, R. Mishra, A. Biswal and S. K. Swain* “Graphene based nanocomposites: A state of the art in heavy metal detection” Microchemical Journal, 115587 (2025). (Impact Factor: 5.1), ISSN: 0026-265X DOI: https://doi.org/10.1016/j.microc.2025.115587
13. P K Behera, D Sahu, B R Jali, A K Barick, S K Swain and P Mohapatra* “A Simple Method for Synthesizing Nitrogen-Doped Carbon Quantum Dots for Fluorescent “Turn off” Mercury (II) Ion Sensing” Journal of Fluorescence (Springer) 35(3), 1685-1694. (2025), (Impact Factor: 3.1), ISBN: 1573-4994. DOI: DOI: https://doi.org/10.1007/s10895-024-03649-1
S K Swain* and G Prusty â€œCh+aracterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* and G Prusty â€œCh+aracterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
Ajaya Kumar Das and Srinivasan Chandrasekaran. "Heave Response control of a Semisubmersible by Passive Dampers". Journal of Ocean Engineering and Technology. vol.6, no.39, pp.559-571,Dec 2025.
Ajaya Kumar Das, Saswat Dwibedy and Uma Sankar Biswal. "Finite element modeling and experimental investigation of reinforced geopolymer concrete T-beam externally strengthened in flexure with side-bonded glass fiber-reinforced polymer laminates". Structural Concrete. Feb 2025.
Ajaya Kumar Das and Srinivasan Chandrasekaran. "Heave Response control of a Semisubmersible by Passive Dampers". Journal of Ocean Engineering and Technology. vol.6, no.39, pp.559-571,Dec 2025.
Ajaya Kumar Das, Saswat Dwibedy and Uma Sankar Biswal. "Finite element modeling and experimental investigation of reinforced geopolymer concrete T-beam externally strengthened in flexure with side-bonded glass fiber-reinforced polymer laminates". Structural Concrete. Feb 2025.
Ajaya Kumar Das and Srinivasan Chandrasekaran. "Heave Response control of a Semisubmersible by Passive Dampers". Journal of Ocean Engineering and Technology. vol.6, no.39, pp.559-571,Dec 2025.
Ajaya Kumar Das, Saswat Dwibedy and Uma Sankar Biswal. "Finite element modeling and experimental investigation of reinforced geopolymer concrete T-beam externally strengthened in flexure with side-bonded glass fiber-reinforced polymer laminates". Structural Concrete. Feb 2025.
Ajaya Kumar Das and Srinivasan Chandrasekaran. "Heave Response control of a Semisubmersible by Passive Dampers". Journal of Ocean Engineering and Technology. vol.6, no.39, pp.559-571,Dec 2025.
Ajaya Kumar Das, Saswat Dwibedy and Uma Sankar Biswal. "Finite element modeling and experimental investigation of reinforced geopolymer concrete T-beam externally strengthened in flexure with side-bonded glass fiber-reinforced polymer laminates". Structural Concrete. Feb 2025.
Ajaya Kumar Das and Srinivasan Chandrasekaran. "Heave Response control of a Semisubmersible by Passive Dampers". Journal of Ocean Engineering and Technology. vol.6, no.39, pp.559-571,Dec 2025.
Ajaya Kumar Das, Saswat Dwibedy and Uma Sankar Biswal. "Finite element modeling and experimental investigation of reinforced geopolymer concrete T-beam externally strengthened in flexure with side-bonded glass fiber-reinforced polymer laminates". Structural Concrete. Feb 2025.
Ajaya Kumar Das and Srinivasan Chandrasekaran. "Heave Response control of a Semisubmersible by Passive Dampers". Journal of Ocean Engineering and Technology. vol.6, no.39, pp.559-571,Dec 2025.
Ajaya Kumar Das, Saswat Dwibedy and Uma Sankar Biswal. "Finite element modeling and experimental investigation of reinforced geopolymer concrete T-beam externally strengthened in flexure with side-bonded glass fiber-reinforced polymer laminates". Structural Concrete. Feb 2025.
Ajaya Kumar Das and Srinivasan Chandrasekaran. "Heave Response control of a Semisubmersible by Passive Dampers". Journal of Ocean Engineering and Technology. vol.6, no.39, pp.559-571,Dec 2025.
Ajaya Kumar Das, Saswat Dwibedy and Uma Sankar Biswal. "Finite element modeling and experimental investigation of reinforced geopolymer concrete T-beam externally strengthened in flexure with side-bonded glass fiber-reinforced polymer laminates". Structural Concrete. Feb 2025.
Ajaya Kumar Das and Srinivasan Chandrasekaran. "Heave Response control of a Semisubmersible by Passive Dampers". Journal of Ocean Engineering and Technology. vol.6, no.39, pp.559-571,Dec 2025.
Ajaya Kumar Das, Saswat Dwibedy and Uma Sankar Biswal. "Finite element modeling and experimental investigation of reinforced geopolymer concrete T-beam externally strengthened in flexure with side-bonded glass fiber-reinforced polymer laminates". Structural Concrete. Feb 2025.
Ajaya Kumar Das and Srinivasan Chandrasekaran. "Heave Response control of a Semisubmersible by Passive Dampers". Journal of Ocean Engineering and Technology. vol.6, no.39, pp.559-571,Dec 2025.
Ajaya Kumar Das, Saswat Dwibedy and Uma Sankar Biswal. "Finite element modeling and experimental investigation of reinforced geopolymer concrete T-beam externally strengthened in flexure with side-bonded glass fiber-reinforced polymer laminates". Structural Concrete. Feb 2025.
Alam J , Panda S*, Nanda P, Dash P, Bibliometric insights into spur gear wear: Trends, detection techniques and sustainable design,Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, https://doi.org/10.1177/09544070251358126
Rath D, Panda S*, Grey relational analysis during sustainable machining of D3 tool steel, International Journal on Interactive Design and Manufacturing (IJIDeM), 1-16, https://doi.org/10.1007/s12008-025-02419-y
Tripathy, M., Samal, R.K. & Dash, B. Exploratory Analysis of 120 m, 100 m Mast Measured Wind Resource for Power System Applications. Arabian Journal for Science and Engineering (2025). https://doi.org/10.1007/s13369-025-10834-2
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8
Tripathy, M., Samal, R.K. & Dash, B. Exploratory Analysis of 120 m, 100 m Mast Measured Wind Resource for Power System Applications. Arabian Journal for Science and Engineering (2025). https://doi.org/10.1007/s13369-025-10834-2
Tripathy, M., Samal, R.K. & Dash, B. Exploratory Analysis of 120 m, 100 m Mast Measured Wind Resource for Power System Applications. Arabian Journal for Science and Engineering (2025). https://doi.org/10.1007/s13369-025-10834-2
Tripathy, M., Samal, R.K. & Dash, B. Exploratory Analysis of 120 m, 100 m Mast Measured Wind Resource for Power System Applications. Arabian Journal for Science and Engineering (2025). https://doi.org/10.1007/s13369-025-10834-2
A. K. Behera, P. Mishra, T. R. Mahapatra, P. Mishra, D. Mishra (2025) Hybrid Epoxy/ Composites for Electronics Applications: Mechanical and Dry Sliding Wear Properties. JOM 77, 2612–2623. https://doi.org/10.1007/s11837-024-07118-9 (IF: 2.1, SCIE)
I. Rout, M. Singh, T. R. Mahapatra, P. Mishra, S. Dash, D. Mishra (2025) Characterization and Optimization of Dry Sliding Wear Properties of Partially Biodegradable Hybrid Polymer Composites. Journal of Bio- and Tribo-Corrosion, 11 (59), 1-22. https://doi.org/10.1007/s40735-025-00979-w (IF: 6.1, SCOPUS)
A. K. Behera, P. Mishra, T. R. Mahapatra, et al. (2025). Study of machinability characteristics of ceramic reinforced polymer composites. Journal of the Australian Ceramic Society. https://doi.org/10.1007/s41779-025-01194-z (IF: 1.8, SCIE)
Swadhin Kumar Mishra, Lipsikha Padhy, Arunanshu Mahapatro, Prabina Pattanayak, Maximization of sum-rate capacity in MU-MIMO Broadcast system with computationally efficient algorithms, Physical Communication, Volume 71, 2025,
Soumya Ranjan Sahu and Sucheta Panda, “A spectral-spatial attention guided multi-scale convolutional network for hyperspectral image classification” Soft Computing, https://doi.org/10.1007/s00500-025-10890-8, Published online on 15.09.2025, Received: 12 September 2024 / Accepted: 28 August 2025, pp.1-27, Impact Factor – 2.5, Springer, SCIE,Scopus.
Tripathy, M., Samal, R.K. & Dash, B. Exploratory Analysis of 120 m, 100 m Mast Measured Wind Resource for Power System Applications. Arabian Journal for Science and Engineering (2025). https://doi.org/10.1007/s13369-025-10834-2
Buckling Behavior of Laminated Shell Panels Under Linearly Variable Edge Load
Effect of Cut-Out on Natural Frequency of Laminated Composite Stiffened Plates
Bijay Kumar Sa, Sanjay Agrawal, and Rutuparna Panda. "A leakage-resistant spatially weighted active contour for brain tumor segmentation." International Journal of Imaging Systems and Technology 35, no. 3 (2025): e70110. DOI: 10.1002/ima.70110
Optimizing task scheduling in cloud environments: a hybrid golden search whale optimization algorithm approach”, Biswaranjan Acharya, Sucheta Panda,Satyabrata Das, Santosh Kumar Majhi, Vassilis C. Gerogiannis, Andreas Kanavos, Neural Computing and Applications(SCI)(Springer),Published: 11 March 2025 DOI: https://doi.org/10.1007/s00521-025-11113-9
Sa, Bijay Kumar; Agrawal, Sanjay; Panda, Rutuparna; , A Leakage Resistant Spatially Weighted Active Contour for Brain Tumor Segmentation, International Journal of Imaging Systems and Technology, Volume 35.0, Number 3, Pages e70110, Wiley Online Library
Rout, Nayan Kajal; Dora, Lingraj; Agrawal, Sanjay; , Heart Disease Classification Utilizing Modified Probabilistic K-Nearest Neighbor with Active Learning, 2025 International Conference on Machine Learning and Autonomous Systems (ICMLAS), Pages 732-739, IEEE
Das, R., Nanda, A, Pradhan, J., Panigrahi, S. K. (2025): Realization of high-strength self-compacting geopolymer concrete through GGBFS-based ternary blended precursors and blended alkali-activated solution, European Journal of Environmental and Civil Engineering, Taylor & Francis, pp. 2547297 (1-61), https://doi.org/10.1080/19648189.2025.2547297
Soumyaranjan Panda, Monalin Pradhan, Saubhagya Kumar Panigrahi (2025): Sustainable development of ternary binder-based mortar using OPC, GGBFS, and Coal Bottom Ash, Construction and Building Materials, Vol. 496, pp. 143862 (1-16), https://doi.org/10.1016/j.conbuildmat.2025.143862
Ashutosh Nanda, Saubhagya Kumar Panigrahi (2025): A comprehensive study on factors influencing radiation shielding concrete characteristics, Nuclear Engineering and Design, Elsevier, SCIE, Vol. 445, 2025, pp. 114466-1-34, https://doi.org/10.1016/j.nucengdes.2025.114466.
Panda, S.and Panigrahi, S. K. (2025): Performance of waste rubber fiber and e-waste fiber in the realization of GGBFS-based self-compacting geopolymer concrete, Journal of Environmental Management, Elsevier, Vol. 393, pp. 1-16 https://doi.org/10.1016/j.jenvman.2025.126999
Panda, S., Pradhan, J., Panigrahi, S. K. (2025): Sustainable production of self-compacting geopolymer concrete through GGBFS-based optimal blended precursor, Construction and Building Materials, Vol. 492, pp. 1-23, https://doi.org/10.1016/j.conbuildmat.2025.142830
Pradhan, M.; Panda, S.; Panigrahi, S. K. (2025): Self-compacting geopolymer concrete yield with GGBFS and copper slag powder as precursor, Proceedings of the Institution of Civil Engineers - Construction Materials, pp 1-18, July 2025, https://doi.org/10.1680/jcoma.25.00014
Panda, S.; Pradhan, J; Panigrahi, S.K. (2025): Realization of GGBFS-based self-compacting geopolymer concrete through ternary blended alkaline activator solution, Construction and Building Materials, Vol. 486, pp 1-21, May 2025, https://doi.org/10.1016/j.conbuildmat.2025.141986
Lenka, J; Behera, S; Mohanty, L; Panigrahi, S K. (2025): Digital Transformation in Structural and Water Resource Engineering Practice: A Tool at Work, The Institution of Engineers (India), 3 (1), pp. 73-78
Panda, S.; Pradhan, M; Panigrahi, S. K. (2025): Sustainable Self-Compacting Conventional Concrete Development with Optimal Content of Ladle Furnace Slag concerning Mechanical and Durability Characteristics, Construction and Building Materials, Vol 471, pp 1-18, March 2025, https://doi.org/10.1016/j.conbuildmat.2025.140761
Nanda, A., Panda, S., Panigrahi, S. K. (2025): Production of durable conventional concrete using recycled HDPE and PET plastic coarse aggregate. Innovative Infrastructure Solutions, Vol. 10 (74), pp. 1-17, Feb. 2025, https://doi.org/10.1007/s41062-025-01886-2
Das, R.; Panda, S.; Panigrahi, S. K. (2025): Influence of different Curing Conditions on Properties of Self-Compacting Geopolymer Concrete. Pollution Control for Clean Environment (ICPCCE-2023), Volume 2, IIT Bhubaneswar, 15th-16th, December, 2023, SPRINGER book series Lecture Notes in Civil Engineering, pp 335–352, https://doi.org/10.1007/978-981-97-7846-1_31.
Pradhan, J.; Panda, S.; Panigrahi, S. K. (2025): Impact of alkali activator types on fresh properties of GGBFS-based Self-Compacting Geopolymer Concrete under ambient temperature. Pollution Control for Clean Environment (ICPCCE-2023), Volume 2, IIT Bhubaneswar, 15th-16th, December, 2023, SPRINGER book series Lecture Notes in Civil Engineering, pp 307–321, https://doi.org/10.1007/978-981-97-7846-1_29.
Mohapatra, D. R.; Panda, S.; Sahu, R.; Panigrahi, S. K. (2025): Behavior of ferrochrome sand in the fresh characteristics of GGBFS-fly ash-based self-compacting geopolymer concrete. Pollution Control for Clean Environment (ICPCCE-2023), Volume 2, IIT Bhubaneswar, 15th-16th, December, 2023, SPRINGER book series Lecture Notes in Civil Engineering, pp 289–305, https://doi.org/10.1007/978-981-97-7846-1_28.
S. Swain, A Biswal, P Mohapatra, S K Swain* “Polyurethane Nanocomposite for Gas Separation: A Review” Polymer-Plastic Technology and Materials, xx, xx-xx (Tylor & Francis), (2025). (Impact Factor: 2.439) ISSN: 2574-089X, DOI: https://doi.org/10.1080/25740881.2025.2491552
S K. Das, D Bharatiya, S Minz, R Saraswat, S. K. Swain*, “Effect of clay on dielectric behaviour of TiO2 embedded PVDF nanocomposite for charge storage applications”, Materials Science in Semiconductor Processing (Elsevier) 192, 109480 (2025) (Impact Factor:4.2), ISSN: 1369-8001, DOI: https://doi.org/10.1016/j.mssp.2025.109480
A. Biswal, S. S. Purohit, L. Mishra, M. Mishra, B. R. Routray, S. B. Biswal, S. Nayak, B. C. Behera and S. K. Swain* “Nano CaCO3 mediated in vitro and in vivo wound healing characteristics of chitosan films without added drugs” International Journal of Biological Macromolecules, (Elsevier), 142057 (2025). (Impact Factor: 8.4), ISSN: 1879-0003 DOI: https://doi.org/10.1016/j.ijbiomac.2025.142057
S. S. Purohit, A. Biswal, P. Mohapatra, O. Khamari, K. Dash, M. Mishra, S. B. Biswal, S. Nayak and S. K. Swain* “Lysozyme/N-GQD loaded carboxymethyl cellulose hydrogels for healing of excision wounds in Drosophila and Sprague Dawley rats” International Journal of Biological Macromolecules, (Elsevier) 141638 (2025). (Impact Factor: 8.4). ISSN: 1879-0003 DOI: https://doi.org/10.1016/j.ijbiomac.2025.141638
S. Swain, S Patra, S Panigrahi, A Biswal, P Mohapatra, S K Swain* “Rhodamine B embedded silver nanogranules for selective sensing of l-cysteine” Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy (Elsevier) 330, 125722 (2025) (Impact Factor:4.3) ISSN: 1386-1425 , DOI: https://doi.org/10.1016/j.saa.2025.125722
Sarmistha Panda, Raseswari Pradhan, Bibhuti Bhusan Pati and Sudhir Kumar Sahoo,(2025) “Analysis of LVRT control strategies for grid-tied photovoltaic systemunder symmetrical faults and grid fluctuation conditions” Engineering Research Express,”Iop publishing 7 March (2025) 025304, doi.org/10.1088/2631-8695/adc53c
Shaswat Chirantan, and B.B. Pati(2025) "A three-phase induction motor dynamic framework regulated by predictive and intelligent optimizations."ITEGAM-JETIA 11, no. 51, pp.43-55.
Mamun Mishra and B. B. Pati (2025), A hybrid islanding detection method using wavelet transform for hybrid systems with zero non-detection zone,World Journal of Engineering, (Emerald Pub)Vol.22, issue-3pp. 627-637. https://doi.org/10.1108/WJE-12-2023-0499.
Manasi Mishra, J.P. Panda and S.S. Sahoo, “Investigations concerning the effects of thermal radiation, induced magnetic field, and chemical reaction on MHD flow through a permeable medium”, International Journal of Modern Physics, B, Vol. 38, No. 02, 2450030 (2024) Available: https://doi.org/10.1142/S0217979224500309
Manasi Mishra and J.P. Panda, “Simulation of thermally radiative flow of a Maxwell’s fluid toward exponentially stretchable surface with heat generation/absorption”, Numerical Heat Transfer, Part B: Fundamentals, doi: 10.1080/10407790.2023.2257878, vol.85, Issue-7,pp 906-921, 2024 Available: https://doi.org/10.1080/10407790.2023.2257878
Arjun Agrawal, J.P. Panda and K.P.Shadangi, “Study the Soret effects on Bioconvective induced magneto-hydrodynamics flow in presence of multiple slip and thermal Radiation”, Numerical Heat Transfer, Part B: Fundamentals, DOI: 10.1080/10407790.2023.2262119, vol.85, Issue-8,pp 1099-1113, 2024, Available: https://doi.org/10.1080/10407790.2023.2262119
Manasi Mishra, J.P. Panda and S.S. Sahoo, “An Analytical investigation of MHD Natural Convective flow of a Polar Fluid in Two Vertical Concentric Cylinders with Hall Current and Heat Source”, Int. J. Applied and Computational Mathematics, vol. 10, no. 75, Mar. 2024. Available: https://doi.org/10.1007/s40819-024-01714-8
Arjun Agrawal and J P Panda, “Soret and Radiation Effect on MHD Flow over Magnetized Vertical Surface with Hall Current and Induced Magnetic Field”, J. Engg. Thermophysics, vol. 33, no. 2, pp 426-443, Jun. 2024, DOI: 10.1134/S1810232824020164
S. Sahu, S. Behera, NCGiri, GUAlaneme, FASyam, FSalem, “Equilibrium optimizer-based double integral sliding mode maximum power point tracking for wind energy,” Bulletin of Electrical Engineering and Informatics, vol. 14, no. 6, pp.4189-4197.(Scopus)DOI: https://doi.org/10.11591/eei.v14i6.10383ISSN: 2302-9285
Babu, M. N., Anandan, V., Thomas, R., Babu, M. D., Das, S. R., & Parthasarathi, N. L. (2024). The behaviour of carbon quantum dots and cryogenic cooling in turning of super duplex F53 steel. Wear, 558, 205575.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Investigation on surface roughness and power consumption for sustainability assessment in hard turning of HSLA steel with SPPP-AlTiSiN–coated carbide tool under various cooling conditions. Lubrication Science, 36(8), 571–594.
Pradhan, S., Samantaray, S. R., Dhupal, D., & Das, S. R. (2024). Comparative performance evaluation between AJM and hot-AJM during machining of zirconia ceramic using silicon carbide abrasives. Surface Review and Letters.
Parida, S. P., Jena, P. C., Das, S. R., Basem, A., Khatua, A. K., & Elsheikh, A. H. (2024). Transverse vibration of laminated composite plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C.
Biswal, S., Das, S. R., Saha, N., & Mishra, P. C. (2024). Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environment, Development and Sustainability, 26(10), 26753–26784.
Das, A., Raman, R., Roy, S., Gajrani, K. K., Ghosh, S., Das, S. R., et al. (2024). Assessing the performance of ionic liquid-assisted minimum quantity lubrication during machining of biomedical-grade stainless steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Panda, D., Sahu, S. K., & Das, S. R. (2024). Comparative performance evaluation and economic assessment between traditional and vibration-assisted EDM during machining of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part C.
Parida, S. P., Mishra, D., Padhy, R. L., Jena, P. C., Das, S. R., Basem, A. A., ... & Elsheikh, A. (2024). Effect of alkali treatment on mechanical and buckling behaviour of natural fiber reinforced composite cylinder. ES Materials and Manufacturing, 24, 1161.
Das, A., Kumar, A., Padhan, S., Das, S. R., Satpathy, M. P., & Patel, S. K. (2024). Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: Comparative machining performance evaluation and economic assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. (2024). Comparative performance investigation and sustainability assessment between hot-AJM and AJM during machining of zirconia ceramic using Al₂O₃ abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Das, S. R., & Dhupal, D. (2024). Simulation analysis during laser microgrooving of alumina ceramic. In Electro-micromachining and microfabrication (pp. 111–138).
Sethy, S., Rana, J., Sharma, P., Das, S. R., et al. (2024). Comparative performance investigation and sustainability assessment in EDM of SS316 using different dielectrics. Proceedings of the Institution of Mechanical Engineers, Part C.
Dhupal, D., Panigrahi, D., Rout, S., Bhuyan, R. K., Nayak, S., Jena, P. C., & Das, S. R. (2024). Generation of effusion holes on ultra-high temperature alloy by micro-EDM process. Surface Review and Letters, 31(02), 2450015.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Analysis on power consumption for life cycle sustainability assessment in hard turning of AISI 4140 steel under various cutting environments. Surface Review and Letters, 31(06), 1–26.
Babu, M. N., Anandan, V., Thomas, R., Babu, M. D., Das, S. R., & Parthasarathi, N. L. (2024). The behaviour of carbon quantum dots and cryogenic cooling in turning of super duplex F53 steel. Wear, 558, 205575.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Investigation on surface roughness and power consumption for sustainability assessment in hard turning of HSLA steel with SPPP-AlTiSiN–coated carbide tool under various cooling conditions. Lubrication Science, 36(8), 571–594.
Pradhan, S., Samantaray, S. R., Dhupal, D., & Das, S. R. (2024). Comparative performance evaluation between AJM and hot-AJM during machining of zirconia ceramic using silicon carbide abrasives. Surface Review and Letters.
Parida, S. P., Jena, P. C., Das, S. R., Basem, A., Khatua, A. K., & Elsheikh, A. H. (2024). Transverse vibration of laminated composite plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C.
Biswal, S., Das, S. R., Saha, N., & Mishra, P. C. (2024). Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environment, Development and Sustainability, 26(10), 26753–26784.
Das, A., Raman, R., Roy, S., Gajrani, K. K., Ghosh, S., Das, S. R., et al. (2024). Assessing the performance of ionic liquid-assisted minimum quantity lubrication during machining of biomedical-grade stainless steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Panda, D., Sahu, S. K., & Das, S. R. (2024). Comparative performance evaluation and economic assessment between traditional and vibration-assisted EDM during machining of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part C.
Parida, S. P., Mishra, D., Padhy, R. L., Jena, P. C., Das, S. R., Basem, A. A., ... & Elsheikh, A. (2024). Effect of alkali treatment on mechanical and buckling behaviour of natural fiber reinforced composite cylinder. ES Materials and Manufacturing, 24, 1161.
Das, A., Kumar, A., Padhan, S., Das, S. R., Satpathy, M. P., & Patel, S. K. (2024). Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: Comparative machining performance evaluation and economic assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. (2024). Comparative performance investigation and sustainability assessment between hot-AJM and AJM during machining of zirconia ceramic using Al₂O₃ abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Das, S. R., & Dhupal, D. (2024). Simulation analysis during laser microgrooving of alumina ceramic. In Electro-micromachining and microfabrication (pp. 111–138).
Sethy, S., Rana, J., Sharma, P., Das, S. R., et al. (2024). Comparative performance investigation and sustainability assessment in EDM of SS316 using different dielectrics. Proceedings of the Institution of Mechanical Engineers, Part C.
Dhupal, D., Panigrahi, D., Rout, S., Bhuyan, R. K., Nayak, S., Jena, P. C., & Das, S. R. (2024). Generation of effusion holes on ultra-high temperature alloy by micro-EDM process. Surface Review and Letters, 31(02), 2450015.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Analysis on power consumption for life cycle sustainability assessment in hard turning of AISI 4140 steel under various cutting environments. Surface Review and Letters, 31(06), 1–26.
Babu, M. N., Anandan, V., Thomas, R., Babu, M. D., Das, S. R., & Parthasarathi, N. L. (2024). The behaviour of carbon quantum dots and cryogenic cooling in turning of super duplex F53 steel. Wear, 558, 205575.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Investigation on surface roughness and power consumption for sustainability assessment in hard turning of HSLA steel with SPPP-AlTiSiN–coated carbide tool under various cooling conditions. Lubrication Science, 36(8), 571–594.
Pradhan, S., Samantaray, S. R., Dhupal, D., & Das, S. R. (2024). Comparative performance evaluation between AJM and hot-AJM during machining of zirconia ceramic using silicon carbide abrasives. Surface Review and Letters.
Parida, S. P., Jena, P. C., Das, S. R., Basem, A., Khatua, A. K., & Elsheikh, A. H. (2024). Transverse vibration of laminated composite plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C.
Biswal, S., Das, S. R., Saha, N., & Mishra, P. C. (2024). Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environment, Development and Sustainability, 26(10), 26753–26784.
Das, A., Raman, R., Roy, S., Gajrani, K. K., Ghosh, S., Das, S. R., et al. (2024). Assessing the performance of ionic liquid-assisted minimum quantity lubrication during machining of biomedical-grade stainless steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Panda, D., Sahu, S. K., & Das, S. R. (2024). Comparative performance evaluation and economic assessment between traditional and vibration-assisted EDM during machining of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part C.
Parida, S. P., Mishra, D., Padhy, R. L., Jena, P. C., Das, S. R., Basem, A. A., ... & Elsheikh, A. (2024). Effect of alkali treatment on mechanical and buckling behaviour of natural fiber reinforced composite cylinder. ES Materials and Manufacturing, 24, 1161.
Das, A., Kumar, A., Padhan, S., Das, S. R., Satpathy, M. P., & Patel, S. K. (2024). Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: Comparative machining performance evaluation and economic assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. (2024). Comparative performance investigation and sustainability assessment between hot-AJM and AJM during machining of zirconia ceramic using Al₂O₃ abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Das, S. R., & Dhupal, D. (2024). Simulation analysis during laser microgrooving of alumina ceramic. In Electro-micromachining and microfabrication (pp. 111–138).
Sethy, S., Rana, J., Sharma, P., Das, S. R., et al. (2024). Comparative performance investigation and sustainability assessment in EDM of SS316 using different dielectrics. Proceedings of the Institution of Mechanical Engineers, Part C.
Dhupal, D., Panigrahi, D., Rout, S., Bhuyan, R. K., Nayak, S., Jena, P. C., & Das, S. R. (2024). Generation of effusion holes on ultra-high temperature alloy by micro-EDM process. Surface Review and Letters, 31(02), 2450015.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Analysis on power consumption for life cycle sustainability assessment in hard turning of AISI 4140 steel under various cutting environments. Surface Review and Letters, 31(06), 1–26.
Babu, M. N., Anandan, V., Thomas, R., Babu, M. D., Das, S. R., & Parthasarathi, N. L. (2024). The behaviour of carbon quantum dots and cryogenic cooling in turning of super duplex F53 steel. Wear, 558, 205575.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Investigation on surface roughness and power consumption for sustainability assessment in hard turning of HSLA steel with SPPP-AlTiSiN–coated carbide tool under various cooling conditions. Lubrication Science, 36(8), 571–594.
Pradhan, S., Samantaray, S. R., Dhupal, D., & Das, S. R. (2024). Comparative performance evaluation between AJM and hot-AJM during machining of zirconia ceramic using silicon carbide abrasives. Surface Review and Letters.
Parida, S. P., Jena, P. C., Das, S. R., Basem, A., Khatua, A. K., & Elsheikh, A. H. (2024). Transverse vibration of laminated composite plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C.
Biswal, S., Das, S. R., Saha, N., & Mishra, P. C. (2024). Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environment, Development and Sustainability, 26(10), 26753–26784.
Das, A., Raman, R., Roy, S., Gajrani, K. K., Ghosh, S., Das, S. R., et al. (2024). Assessing the performance of ionic liquid-assisted minimum quantity lubrication during machining of biomedical-grade stainless steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Panda, D., Sahu, S. K., & Das, S. R. (2024). Comparative performance evaluation and economic assessment between traditional and vibration-assisted EDM during machining of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part C.
Parida, S. P., Mishra, D., Padhy, R. L., Jena, P. C., Das, S. R., Basem, A. A., ... & Elsheikh, A. (2024). Effect of alkali treatment on mechanical and buckling behaviour of natural fiber reinforced composite cylinder. ES Materials and Manufacturing, 24, 1161.
Das, A., Kumar, A., Padhan, S., Das, S. R., Satpathy, M. P., & Patel, S. K. (2024). Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: Comparative machining performance evaluation and economic assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. (2024). Comparative performance investigation and sustainability assessment between hot-AJM and AJM during machining of zirconia ceramic using Al₂O₃ abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Das, S. R., & Dhupal, D. (2024). Simulation analysis during laser microgrooving of alumina ceramic. In Electro-micromachining and microfabrication (pp. 111–138).
Sethy, S., Rana, J., Sharma, P., Das, S. R., et al. (2024). Comparative performance investigation and sustainability assessment in EDM of SS316 using different dielectrics. Proceedings of the Institution of Mechanical Engineers, Part C.
Dhupal, D., Panigrahi, D., Rout, S., Bhuyan, R. K., Nayak, S., Jena, P. C., & Das, S. R. (2024). Generation of effusion holes on ultra-high temperature alloy by micro-EDM process. Surface Review and Letters, 31(02), 2450015.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Analysis on power consumption for life cycle sustainability assessment in hard turning of AISI 4140 steel under various cutting environments. Surface Review and Letters, 31(06), 1–26.
Babu, M. N., Anandan, V., Thomas, R., Babu, M. D., Das, S. R., & Parthasarathi, N. L. (2024). The behaviour of carbon quantum dots and cryogenic cooling in turning of super duplex F53 steel. Wear, 558, 205575.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Investigation on surface roughness and power consumption for sustainability assessment in hard turning of HSLA steel with SPPP-AlTiSiN–coated carbide tool under various cooling conditions. Lubrication Science, 36(8), 571–594.
Pradhan, S., Samantaray, S. R., Dhupal, D., & Das, S. R. (2024). Comparative performance evaluation between AJM and hot-AJM during machining of zirconia ceramic using silicon carbide abrasives. Surface Review and Letters.
Parida, S. P., Jena, P. C., Das, S. R., Basem, A., Khatua, A. K., & Elsheikh, A. H. (2024). Transverse vibration of laminated composite plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C.
Biswal, S., Das, S. R., Saha, N., & Mishra, P. C. (2024). Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environment, Development and Sustainability, 26(10), 26753–26784.
Das, A., Raman, R., Roy, S., Gajrani, K. K., Ghosh, S., Das, S. R., et al. (2024). Assessing the performance of ionic liquid-assisted minimum quantity lubrication during machining of biomedical-grade stainless steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Panda, D., Sahu, S. K., & Das, S. R. (2024). Comparative performance evaluation and economic assessment between traditional and vibration-assisted EDM during machining of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part C.
Parida, S. P., Mishra, D., Padhy, R. L., Jena, P. C., Das, S. R., Basem, A. A., ... & Elsheikh, A. (2024). Effect of alkali treatment on mechanical and buckling behaviour of natural fiber reinforced composite cylinder. ES Materials and Manufacturing, 24, 1161.
Das, A., Kumar, A., Padhan, S., Das, S. R., Satpathy, M. P., & Patel, S. K. (2024). Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: Comparative machining performance evaluation and economic assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. (2024). Comparative performance investigation and sustainability assessment between hot-AJM and AJM during machining of zirconia ceramic using Al₂O₃ abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Das, S. R., & Dhupal, D. (2024). Simulation analysis during laser microgrooving of alumina ceramic. In Electro-micromachining and microfabrication (pp. 111–138).
Sethy, S., Rana, J., Sharma, P., Das, S. R., et al. (2024). Comparative performance investigation and sustainability assessment in EDM of SS316 using different dielectrics. Proceedings of the Institution of Mechanical Engineers, Part C.
Dhupal, D., Panigrahi, D., Rout, S., Bhuyan, R. K., Nayak, S., Jena, P. C., & Das, S. R. (2024). Generation of effusion holes on ultra-high temperature alloy by micro-EDM process. Surface Review and Letters, 31(02), 2450015.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Analysis on power consumption for life cycle sustainability assessment in hard turning of AISI 4140 steel under various cutting environments. Surface Review and Letters, 31(06), 1–26.
Babu, M. N., Anandan, V., Thomas, R., Babu, M. D., Das, S. R., & Parthasarathi, N. L. (2024). The behaviour of carbon quantum dots and cryogenic cooling in turning of super duplex F53 steel. Wear, 558, 205575.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Investigation on surface roughness and power consumption for sustainability assessment in hard turning of HSLA steel with SPPP-AlTiSiN–coated carbide tool under various cooling conditions. Lubrication Science, 36(8), 571–594.
Pradhan, S., Samantaray, S. R., Dhupal, D., & Das, S. R. (2024). Comparative performance evaluation between AJM and hot-AJM during machining of zirconia ceramic using silicon carbide abrasives. Surface Review and Letters.
Parida, S. P., Jena, P. C., Das, S. R., Basem, A., Khatua, A. K., & Elsheikh, A. H. (2024). Transverse vibration of laminated composite plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C.
Biswal, S., Das, S. R., Saha, N., & Mishra, P. C. (2024). Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environment, Development and Sustainability, 26(10), 26753–26784.
Das, A., Raman, R., Roy, S., Gajrani, K. K., Ghosh, S., Das, S. R., et al. (2024). Assessing the performance of ionic liquid-assisted minimum quantity lubrication during machining of biomedical-grade stainless steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Panda, D., Sahu, S. K., & Das, S. R. (2024). Comparative performance evaluation and economic assessment between traditional and vibration-assisted EDM during machining of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part C.
Parida, S. P., Mishra, D., Padhy, R. L., Jena, P. C., Das, S. R., Basem, A. A., ... & Elsheikh, A. (2024). Effect of alkali treatment on mechanical and buckling behaviour of natural fiber reinforced composite cylinder. ES Materials and Manufacturing, 24, 1161.
Das, A., Kumar, A., Padhan, S., Das, S. R., Satpathy, M. P., & Patel, S. K. (2024). Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: Comparative machining performance evaluation and economic assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. (2024). Comparative performance investigation and sustainability assessment between hot-AJM and AJM during machining of zirconia ceramic using Al₂O₃ abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Das, S. R., & Dhupal, D. (2024). Simulation analysis during laser microgrooving of alumina ceramic. In Electro-micromachining and microfabrication (pp. 111–138).
Sethy, S., Rana, J., Sharma, P., Das, S. R., et al. (2024). Comparative performance investigation and sustainability assessment in EDM of SS316 using different dielectrics. Proceedings of the Institution of Mechanical Engineers, Part C.
Dhupal, D., Panigrahi, D., Rout, S., Bhuyan, R. K., Nayak, S., Jena, P. C., & Das, S. R. (2024). Generation of effusion holes on ultra-high temperature alloy by micro-EDM process. Surface Review and Letters, 31(02), 2450015.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Analysis on power consumption for life cycle sustainability assessment in hard turning of AISI 4140 steel under various cutting environments. Surface Review and Letters, 31(06), 1–26.
Babu, M. N., Anandan, V., Thomas, R., Babu, M. D., Das, S. R., & Parthasarathi, N. L. (2024). The behaviour of carbon quantum dots and cryogenic cooling in turning of super duplex F53 steel. Wear, 558, 205575.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Investigation on surface roughness and power consumption for sustainability assessment in hard turning of HSLA steel with SPPP-AlTiSiN–coated carbide tool under various cooling conditions. Lubrication Science, 36(8), 571–594.
Pradhan, S., Samantaray, S. R., Dhupal, D., & Das, S. R. (2024). Comparative performance evaluation between AJM and hot-AJM during machining of zirconia ceramic using silicon carbide abrasives. Surface Review and Letters.
Parida, S. P., Jena, P. C., Das, S. R., Basem, A., Khatua, A. K., & Elsheikh, A. H. (2024). Transverse vibration of laminated composite plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C.
Biswal, S., Das, S. R., Saha, N., & Mishra, P. C. (2024). Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environment, Development and Sustainability, 26(10), 26753–26784.
Das, A., Raman, R., Roy, S., Gajrani, K. K., Ghosh, S., Das, S. R., et al. (2024). Assessing the performance of ionic liquid-assisted minimum quantity lubrication during machining of biomedical-grade stainless steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Panda, D., Sahu, S. K., & Das, S. R. (2024). Comparative performance evaluation and economic assessment between traditional and vibration-assisted EDM during machining of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part C.
Parida, S. P., Mishra, D., Padhy, R. L., Jena, P. C., Das, S. R., Basem, A. A., ... & Elsheikh, A. (2024). Effect of alkali treatment on mechanical and buckling behaviour of natural fiber reinforced composite cylinder. ES Materials and Manufacturing, 24, 1161.
Das, A., Kumar, A., Padhan, S., Das, S. R., Satpathy, M. P., & Patel, S. K. (2024). Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: Comparative machining performance evaluation and economic assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. (2024). Comparative performance investigation and sustainability assessment between hot-AJM and AJM during machining of zirconia ceramic using Al₂O₃ abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Das, S. R., & Dhupal, D. (2024). Simulation analysis during laser microgrooving of alumina ceramic. In Electro-micromachining and microfabrication (pp. 111–138).
Sethy, S., Rana, J., Sharma, P., Das, S. R., et al. (2024). Comparative performance investigation and sustainability assessment in EDM of SS316 using different dielectrics. Proceedings of the Institution of Mechanical Engineers, Part C.
Dhupal, D., Panigrahi, D., Rout, S., Bhuyan, R. K., Nayak, S., Jena, P. C., & Das, S. R. (2024). Generation of effusion holes on ultra-high temperature alloy by micro-EDM process. Surface Review and Letters, 31(02), 2450015.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Analysis on power consumption for life cycle sustainability assessment in hard turning of AISI 4140 steel under various cutting environments. Surface Review and Letters, 31(06), 1–26.
Babu, M. N., Anandan, V., Thomas, R., Babu, M. D., Das, S. R., & Parthasarathi, N. L. (2024). The behaviour of carbon quantum dots and cryogenic cooling in turning of super duplex F53 steel. Wear, 558, 205575.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Investigation on surface roughness and power consumption for sustainability assessment in hard turning of HSLA steel with SPPP-AlTiSiN–coated carbide tool under various cooling conditions. Lubrication Science, 36(8), 571–594.
Pradhan, S., Samantaray, S. R., Dhupal, D., & Das, S. R. (2024). Comparative performance evaluation between AJM and hot-AJM during machining of zirconia ceramic using silicon carbide abrasives. Surface Review and Letters.
Parida, S. P., Jena, P. C., Das, S. R., Basem, A., Khatua, A. K., & Elsheikh, A. H. (2024). Transverse vibration of laminated composite plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C.
Biswal, S., Das, S. R., Saha, N., & Mishra, P. C. (2024). Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environment, Development and Sustainability, 26(10), 26753–26784.
Das, A., Raman, R., Roy, S., Gajrani, K. K., Ghosh, S., Das, S. R., et al. (2024). Assessing the performance of ionic liquid-assisted minimum quantity lubrication during machining of biomedical-grade stainless steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Panda, D., Sahu, S. K., & Das, S. R. (2024). Comparative performance evaluation and economic assessment between traditional and vibration-assisted EDM during machining of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part C.
Parida, S. P., Mishra, D., Padhy, R. L., Jena, P. C., Das, S. R., Basem, A. A., ... & Elsheikh, A. (2024). Effect of alkali treatment on mechanical and buckling behaviour of natural fiber reinforced composite cylinder. ES Materials and Manufacturing, 24, 1161.
Das, A., Kumar, A., Padhan, S., Das, S. R., Satpathy, M. P., & Patel, S. K. (2024). Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: Comparative machining performance evaluation and economic assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. (2024). Comparative performance investigation and sustainability assessment between hot-AJM and AJM during machining of zirconia ceramic using Al₂O₃ abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Das, S. R., & Dhupal, D. (2024). Simulation analysis during laser microgrooving of alumina ceramic. In Electro-micromachining and microfabrication (pp. 111–138).
Sethy, S., Rana, J., Sharma, P., Das, S. R., et al. (2024). Comparative performance investigation and sustainability assessment in EDM of SS316 using different dielectrics. Proceedings of the Institution of Mechanical Engineers, Part C.
Dhupal, D., Panigrahi, D., Rout, S., Bhuyan, R. K., Nayak, S., Jena, P. C., & Das, S. R. (2024). Generation of effusion holes on ultra-high temperature alloy by micro-EDM process. Surface Review and Letters, 31(02), 2450015.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Analysis on power consumption for life cycle sustainability assessment in hard turning of AISI 4140 steel under various cutting environments. Surface Review and Letters, 31(06), 1–26.
Babu, M. N., Anandan, V., Thomas, R., Babu, M. D., Das, S. R., & Parthasarathi, N. L. (2024). The behaviour of carbon quantum dots and cryogenic cooling in turning of super duplex F53 steel. Wear, 558, 205575.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Investigation on surface roughness and power consumption for sustainability assessment in hard turning of HSLA steel with SPPP-AlTiSiN–coated carbide tool under various cooling conditions. Lubrication Science, 36(8), 571–594.
Pradhan, S., Samantaray, S. R., Dhupal, D., & Das, S. R. (2024). Comparative performance evaluation between AJM and hot-AJM during machining of zirconia ceramic using silicon carbide abrasives. Surface Review and Letters.
Parida, S. P., Jena, P. C., Das, S. R., Basem, A., Khatua, A. K., & Elsheikh, A. H. (2024). Transverse vibration of laminated composite plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C.
Biswal, S., Das, S. R., Saha, N., & Mishra, P. C. (2024). Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environment, Development and Sustainability, 26(10), 26753–26784.
Das, A., Raman, R., Roy, S., Gajrani, K. K., Ghosh, S., Das, S. R., et al. (2024). Assessing the performance of ionic liquid-assisted minimum quantity lubrication during machining of biomedical-grade stainless steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Panda, D., Sahu, S. K., & Das, S. R. (2024). Comparative performance evaluation and economic assessment between traditional and vibration-assisted EDM during machining of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part C.
Parida, S. P., Mishra, D., Padhy, R. L., Jena, P. C., Das, S. R., Basem, A. A., ... & Elsheikh, A. (2024). Effect of alkali treatment on mechanical and buckling behaviour of natural fiber reinforced composite cylinder. ES Materials and Manufacturing, 24, 1161.
Das, A., Kumar, A., Padhan, S., Das, S. R., Satpathy, M. P., & Patel, S. K. (2024). Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: Comparative machining performance evaluation and economic assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. (2024). Comparative performance investigation and sustainability assessment between hot-AJM and AJM during machining of zirconia ceramic using Al₂O₃ abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Das, S. R., & Dhupal, D. (2024). Simulation analysis during laser microgrooving of alumina ceramic. In Electro-micromachining and microfabrication (pp. 111–138).
Sethy, S., Rana, J., Sharma, P., Das, S. R., et al. (2024). Comparative performance investigation and sustainability assessment in EDM of SS316 using different dielectrics. Proceedings of the Institution of Mechanical Engineers, Part C.
Dhupal, D., Panigrahi, D., Rout, S., Bhuyan, R. K., Nayak, S., Jena, P. C., & Das, S. R. (2024). Generation of effusion holes on ultra-high temperature alloy by micro-EDM process. Surface Review and Letters, 31(02), 2450015.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Analysis on power consumption for life cycle sustainability assessment in hard turning of AISI 4140 steel under various cutting environments. Surface Review and Letters, 31(06), 1–26.
Babu, M. N., Anandan, V., Thomas, R., Babu, M. D., Das, S. R., & Parthasarathi, N. L. (2024). The behaviour of carbon quantum dots and cryogenic cooling in turning of super duplex F53 steel. Wear, 558, 205575.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Investigation on surface roughness and power consumption for sustainability assessment in hard turning of HSLA steel with SPPP-AlTiSiN–coated carbide tool under various cooling conditions. Lubrication Science, 36(8), 571–594.
Pradhan, S., Samantaray, S. R., Dhupal, D., & Das, S. R. (2024). Comparative performance evaluation between AJM and hot-AJM during machining of zirconia ceramic using silicon carbide abrasives. Surface Review and Letters.
Parida, S. P., Jena, P. C., Das, S. R., Basem, A., Khatua, A. K., & Elsheikh, A. H. (2024). Transverse vibration of laminated composite plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C.
Biswal, S., Das, S. R., Saha, N., & Mishra, P. C. (2024). Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environment, Development and Sustainability, 26(10), 26753–26784.
Das, A., Raman, R., Roy, S., Gajrani, K. K., Ghosh, S., Das, S. R., et al. (2024). Assessing the performance of ionic liquid-assisted minimum quantity lubrication during machining of biomedical-grade stainless steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Panda, D., Sahu, S. K., & Das, S. R. (2024). Comparative performance evaluation and economic assessment between traditional and vibration-assisted EDM during machining of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part C.
Parida, S. P., Mishra, D., Padhy, R. L., Jena, P. C., Das, S. R., Basem, A. A., ... & Elsheikh, A. (2024). Effect of alkali treatment on mechanical and buckling behaviour of natural fiber reinforced composite cylinder. ES Materials and Manufacturing, 24, 1161.
Das, A., Kumar, A., Padhan, S., Das, S. R., Satpathy, M. P., & Patel, S. K. (2024). Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: Comparative machining performance evaluation and economic assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. (2024). Comparative performance investigation and sustainability assessment between hot-AJM and AJM during machining of zirconia ceramic using Al₂O₃ abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Das, S. R., & Dhupal, D. (2024). Simulation analysis during laser microgrooving of alumina ceramic. In Electro-micromachining and microfabrication (pp. 111–138).
Sethy, S., Rana, J., Sharma, P., Das, S. R., et al. (2024). Comparative performance investigation and sustainability assessment in EDM of SS316 using different dielectrics. Proceedings of the Institution of Mechanical Engineers, Part C.
Dhupal, D., Panigrahi, D., Rout, S., Bhuyan, R. K., Nayak, S., Jena, P. C., & Das, S. R. (2024). Generation of effusion holes on ultra-high temperature alloy by micro-EDM process. Surface Review and Letters, 31(02), 2450015.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Analysis on power consumption for life cycle sustainability assessment in hard turning of AISI 4140 steel under various cutting environments. Surface Review and Letters, 31(06), 1–26.
Babu, M. N., Anandan, V., Thomas, R., Babu, M. D., Das, S. R., & Parthasarathi, N. L. (2024). The behaviour of carbon quantum dots and cryogenic cooling in turning of super duplex F53 steel. Wear, 558, 205575.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Investigation on surface roughness and power consumption for sustainability assessment in hard turning of HSLA steel with SPPP-AlTiSiN–coated carbide tool under various cooling conditions. Lubrication Science, 36(8), 571–594.
Pradhan, S., Samantaray, S. R., Dhupal, D., & Das, S. R. (2024). Comparative performance evaluation between AJM and hot-AJM during machining of zirconia ceramic using silicon carbide abrasives. Surface Review and Letters.
Parida, S. P., Jena, P. C., Das, S. R., Basem, A., Khatua, A. K., & Elsheikh, A. H. (2024). Transverse vibration of laminated composite plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C.
Biswal, S., Das, S. R., Saha, N., & Mishra, P. C. (2024). Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environment, Development and Sustainability, 26(10), 26753–26784.
Das, A., Raman, R., Roy, S., Gajrani, K. K., Ghosh, S., Das, S. R., et al. (2024). Assessing the performance of ionic liquid-assisted minimum quantity lubrication during machining of biomedical-grade stainless steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Panda, D., Sahu, S. K., & Das, S. R. (2024). Comparative performance evaluation and economic assessment between traditional and vibration-assisted EDM during machining of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part C.
Parida, S. P., Mishra, D., Padhy, R. L., Jena, P. C., Das, S. R., Basem, A. A., ... & Elsheikh, A. (2024). Effect of alkali treatment on mechanical and buckling behaviour of natural fiber reinforced composite cylinder. ES Materials and Manufacturing, 24, 1161.
Das, A., Kumar, A., Padhan, S., Das, S. R., Satpathy, M. P., & Patel, S. K. (2024). Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: Comparative machining performance evaluation and economic assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. (2024). Comparative performance investigation and sustainability assessment between hot-AJM and AJM during machining of zirconia ceramic using Al₂O₃ abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Das, S. R., & Dhupal, D. (2024). Simulation analysis during laser microgrooving of alumina ceramic. In Electro-micromachining and microfabrication (pp. 111–138).
Sethy, S., Rana, J., Sharma, P., Das, S. R., et al. (2024). Comparative performance investigation and sustainability assessment in EDM of SS316 using different dielectrics. Proceedings of the Institution of Mechanical Engineers, Part C.
Dhupal, D., Panigrahi, D., Rout, S., Bhuyan, R. K., Nayak, S., Jena, P. C., & Das, S. R. (2024). Generation of effusion holes on ultra-high temperature alloy by micro-EDM process. Surface Review and Letters, 31(02), 2450015.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Analysis on power consumption for life cycle sustainability assessment in hard turning of AISI 4140 steel under various cutting environments. Surface Review and Letters, 31(06), 1–26.
Babu, M. N., Anandan, V., Thomas, R., Babu, M. D., Das, S. R., & Parthasarathi, N. L. (2024). The behaviour of carbon quantum dots and cryogenic cooling in turning of super duplex F53 steel. Wear, 558, 205575.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Investigation on surface roughness and power consumption for sustainability assessment in hard turning of HSLA steel with SPPP-AlTiSiN–coated carbide tool under various cooling conditions. Lubrication Science, 36(8), 571–594.
Pradhan, S., Samantaray, S. R., Dhupal, D., & Das, S. R. (2024). Comparative performance evaluation between AJM and hot-AJM during machining of zirconia ceramic using silicon carbide abrasives. Surface Review and Letters.
Parida, S. P., Jena, P. C., Das, S. R., Basem, A., Khatua, A. K., & Elsheikh, A. H. (2024). Transverse vibration of laminated composite plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C.
Biswal, S., Das, S. R., Saha, N., & Mishra, P. C. (2024). Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environment, Development and Sustainability, 26(10), 26753–26784.
Das, A., Raman, R., Roy, S., Gajrani, K. K., Ghosh, S., Das, S. R., et al. (2024). Assessing the performance of ionic liquid-assisted minimum quantity lubrication during machining of biomedical-grade stainless steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Panda, D., Sahu, S. K., & Das, S. R. (2024). Comparative performance evaluation and economic assessment between traditional and vibration-assisted EDM during machining of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part C.
Parida, S. P., Mishra, D., Padhy, R. L., Jena, P. C., Das, S. R., Basem, A. A., ... & Elsheikh, A. (2024). Effect of alkali treatment on mechanical and buckling behaviour of natural fiber reinforced composite cylinder. ES Materials and Manufacturing, 24, 1161.
Das, A., Kumar, A., Padhan, S., Das, S. R., Satpathy, M. P., & Patel, S. K. (2024). Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: Comparative machining performance evaluation and economic assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. (2024). Comparative performance investigation and sustainability assessment between hot-AJM and AJM during machining of zirconia ceramic using Al₂O₃ abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Das, S. R., & Dhupal, D. (2024). Simulation analysis during laser microgrooving of alumina ceramic. In Electro-micromachining and microfabrication (pp. 111–138).
Sethy, S., Rana, J., Sharma, P., Das, S. R., et al. (2024). Comparative performance investigation and sustainability assessment in EDM of SS316 using different dielectrics. Proceedings of the Institution of Mechanical Engineers, Part C.
Dhupal, D., Panigrahi, D., Rout, S., Bhuyan, R. K., Nayak, S., Jena, P. C., & Das, S. R. (2024). Generation of effusion holes on ultra-high temperature alloy by micro-EDM process. Surface Review and Letters, 31(02), 2450015.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Analysis on power consumption for life cycle sustainability assessment in hard turning of AISI 4140 steel under various cutting environments. Surface Review and Letters, 31(06), 1–26.
Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Chandrakanta Mishra, Investigation of Mechanical Attributes and Dynamic Mechanical Analysis of Hybrid Polyester Composites for Automotive Applications, Fibers and Polymers, Pages 1-19
Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Padmanav Dash, Effect of pistachio shell particles on mechanical and erosion wear performance of hybrid kenaf/glass polyester composites, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 13506501231224686
Lipsamayee Mishra, Trupti Ranjan Mahapatra, Debadutta Mishra, Punyapriya Mishra, Pratap Chandra Padhi, Study of Nd: YAG laser micro-drilling machinability and parametric optimization of graphite/Epoxy and carbon black/Epoxy nanocomposites, Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems, 23977914231217921
Dilip K. Sahu, Priyam P. Tripathy, Trupti R. Mahapatra, Punyapriya Mishra, Debadutta Mishra, Design optimization of structural component (hitch bracket of tractor): A reverse engineering approach, Structural Engineering and Mechanics, 89(5)
Binita Dash, Trupti R. Mahapatra, Punyapriya Mishra, Debadutta Mishra, Hygrothermal sound radiation analysis of layered composite plate using HFEM-IBEM micromechanical model and experimental validation, Structural Engineering and Mechanics, 89(3), 265-281
Itishree Rout, Trupti Ranjan Mahapatra, Punyapriya Mishra, Debadutta Mishra, Free Vibration and Acoustic Responses of Partially Biodegradable Hybrid Composites: Numerical Analysis and Experimental Validation, Journal of Vibration Engineering & Technologies, 1-20
Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Padmanav Dash, Influence of pistachio shell filler addition and interply hybridization on mechanical and thermal performances of polyester composites, Journal of Elastomers & Plastics, 56(2), 169-193
Chetana Tripathy, Deepak Kumar Mohapatra, Chitta Ranjan Deo, Padmanav Dash, Punyapriya Mishra, Experimental and numerical evaluation of mechanical performances of hybrid Palmyra-Palm-Leaf-Stalk/Glass fiber reinforced polyester composites, Journal of Elastomers & Plastics, 56(2), 141-168
Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Chandrakanta Mishra, Influence of Load and Sliding Velocity on Abrasive Wear of Polyester Composites Reinforced with Bio-Particulates as Filler Material, Transactions of Indian Institute of Metals, 1, 1-10
Ajit Kumar Behera, Punyapriya Mishra, Punyatoya Mishra, Chitta Ranjan Deo, Deepak Kumar Mohapatra, Debasish Rout, Effect of impact velocity and impingement angle on the Erosive wear behaviour of ceramic reinforced polymer composites, Transactions of Indian Institute of Metals, 77(2), 371-378
Swagatika Mishra, Punyapriya Mishra, Punyatoya Mishra, Deepak Kumar Mohapatra, Dinesh Kumar Mishra, Krushna Prasad Shadangi, Study of frequency dependence properties of CCTO-BT/epoxy composites, Part C: Journal of Mechanical Engineering Science, 238 (6), 2140-2149
Chetana Tripathy, Deepak Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Erosive wear study of PPLSF/Glass fiber reinforced hybrid laminates, Journal of Harbin Institute of Technology (New Series)
Chandrakanta Mishra, Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Kiran Kumar Ekka, Erosion wear behaviour of kenaf/glass hybrid polymer composites. Journal of Harbin Institute of Technology (New Series), 31 (1), 78-89
Swagatika Mishra, Punyapriya Mishra, Punyatoya Mishra, Dinesh Kumar Mishra, Krushna Prasad Shadangi, Deepak Kumar Mohapatra, Evaluation of dielectric properties of CCTO-BT/epoxy composites for electronic applications. Journal of Harbin Institute of Technology (New Series), 31(1), 69-77
Babu, M. N., Anandan, V., Thomas, R., Babu, M. D., Das, S. R., & Parthasarathi, N. L. (2024). The behaviour of carbon quantum dots and cryogenic cooling in turning of super duplex F53 steel. Wear, 558, 205575.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Investigation on surface roughness and power consumption for sustainability assessment in hard turning of HSLA steel with SPPP-AlTiSiN–coated carbide tool under various cooling conditions. Lubrication Science, 36(8), 571–594.
Pradhan, S., Samantaray, S. R., Dhupal, D., & Das, S. R. (2024). Comparative performance evaluation between AJM and hot-AJM during machining of zirconia ceramic using silicon carbide abrasives. Surface Review and Letters.
Parida, S. P., Jena, P. C., Das, S. R., Basem, A., Khatua, A. K., & Elsheikh, A. H. (2024). Transverse vibration of laminated composite plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C.
Biswal, S., Das, S. R., Saha, N., & Mishra, P. C. (2024). Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environment, Development and Sustainability, 26(10), 26753–26784.
Das, A., Raman, R., Roy, S., Gajrani, K. K., Ghosh, S., Das, S. R., et al. (2024). Assessing the performance of ionic liquid-assisted minimum quantity lubrication during machining of biomedical-grade stainless steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Panda, D., Sahu, S. K., & Das, S. R. (2024). Comparative performance evaluation and economic assessment between traditional and vibration-assisted EDM during machining of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part C.
Parida, S. P., Mishra, D., Padhy, R. L., Jena, P. C., Das, S. R., Basem, A. A., ... & Elsheikh, A. (2024). Effect of alkali treatment on mechanical and buckling behaviour of natural fiber reinforced composite cylinder. ES Materials and Manufacturing, 24, 1161.
Das, A., Kumar, A., Padhan, S., Das, S. R., Satpathy, M. P., & Patel, S. K. (2024). Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: Comparative machining performance evaluation and economic assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. (2024). Comparative performance investigation and sustainability assessment between hot-AJM and AJM during machining of zirconia ceramic using Al₂O₃ abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Das, S. R., & Dhupal, D. (2024). Simulation analysis during laser microgrooving of alumina ceramic. In Electro-micromachining and microfabrication (pp. 111–138).
Sethy, S., Rana, J., Sharma, P., Das, S. R., et al. (2024). Comparative performance investigation and sustainability assessment in EDM of SS316 using different dielectrics. Proceedings of the Institution of Mechanical Engineers, Part C.
Dhupal, D., Panigrahi, D., Rout, S., Bhuyan, R. K., Nayak, S., Jena, P. C., & Das, S. R. (2024). Generation of effusion holes on ultra-high temperature alloy by micro-EDM process. Surface Review and Letters, 31(02), 2450015.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Analysis on power consumption for life cycle sustainability assessment in hard turning of AISI 4140 steel under various cutting environments. Surface Review and Letters, 31(06), 1–26.
Babu, M. N., Anandan, V., Thomas, R., Babu, M. D., Das, S. R., & Parthasarathi, N. L. (2024). The behaviour of carbon quantum dots and cryogenic cooling in turning of super duplex F53 steel. Wear, 558, 205575.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Investigation on surface roughness and power consumption for sustainability assessment in hard turning of HSLA steel with SPPP-AlTiSiN–coated carbide tool under various cooling conditions. Lubrication Science, 36(8), 571–594.
Pradhan, S., Samantaray, S. R., Dhupal, D., & Das, S. R. (2024). Comparative performance evaluation between AJM and hot-AJM during machining of zirconia ceramic using silicon carbide abrasives. Surface Review and Letters.
Parida, S. P., Jena, P. C., Das, S. R., Basem, A., Khatua, A. K., & Elsheikh, A. H. (2024). Transverse vibration of laminated composite plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C.
Biswal, S., Das, S. R., Saha, N., & Mishra, P. C. (2024). Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environment, Development and Sustainability, 26(10), 26753–26784.
Das, A., Raman, R., Roy, S., Gajrani, K. K., Ghosh, S., Das, S. R., et al. (2024). Assessing the performance of ionic liquid-assisted minimum quantity lubrication during machining of biomedical-grade stainless steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Panda, D., Sahu, S. K., & Das, S. R. (2024). Comparative performance evaluation and economic assessment between traditional and vibration-assisted EDM during machining of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part C.
Parida, S. P., Mishra, D., Padhy, R. L., Jena, P. C., Das, S. R., Basem, A. A., ... & Elsheikh, A. (2024). Effect of alkali treatment on mechanical and buckling behaviour of natural fiber reinforced composite cylinder. ES Materials and Manufacturing, 24, 1161.
Das, A., Kumar, A., Padhan, S., Das, S. R., Satpathy, M. P., & Patel, S. K. (2024). Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: Comparative machining performance evaluation and economic assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. (2024). Comparative performance investigation and sustainability assessment between hot-AJM and AJM during machining of zirconia ceramic using Al₂O₃ abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
Das, S. R., & Dhupal, D. (2024). Simulation analysis during laser microgrooving of alumina ceramic. In Electro-micromachining and microfabrication (pp. 111–138).
Sethy, S., Rana, J., Sharma, P., Das, S. R., et al. (2024). Comparative performance investigation and sustainability assessment in EDM of SS316 using different dielectrics. Proceedings of the Institution of Mechanical Engineers, Part C.
Dhupal, D., Panigrahi, D., Rout, S., Bhuyan, R. K., Nayak, S., Jena, P. C., & Das, S. R. (2024). Generation of effusion holes on ultra-high temperature alloy by micro-EDM process. Surface Review and Letters, 31(02), 2450015.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Analysis on power consumption for life cycle sustainability assessment in hard turning of AISI 4140 steel under various cutting environments. Surface Review and Letters, 31(06), 1–26.
20. Babu, M. N., Anandan, V., Thomas, R., Babu, M. D., Das, S. R., & Parthasarathi, N. L. (2024). The behaviour of carbon quantum dots and cryogenic cooling in turning of super duplex F53 steel. Wear, 558, 205575.
21. Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Investigation on surface roughness and power consumption for sustainability assessment in hard turning of HSLA steel with SPPP-AlTiSiN–coated carbide tool under various cooling conditions. Lubrication Science, 36(8), 571–594.
22. Pradhan, S., Samantaray, S. R., Dhupal, D., & Das, S. R. (2024). Comparative performance evaluation between AJM and hot-AJM during machining of zirconia ceramic using silicon carbide abrasives. Surface Review and Letters.
23. Parida, S. P., Jena, P. C., Das, S. R., Basem, A., Khatua, A. K., & Elsheikh, A. H. (2024). Transverse vibration of laminated composite plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C.
24. Biswal, S., Das, S. R., Saha, N., & Mishra, P. C. (2024). Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environment, Development and Sustainability, 26(10), 26753–26784.
25. Das, A., Raman, R., Roy, S., Gajrani, K. K., Ghosh, S., Das, S. R., et al. (2024). Assessing the performance of ionic liquid-assisted minimum quantity lubrication during machining of biomedical-grade stainless steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
26. Panda, D., Sahu, S. K., & Das, S. R. (2024). Comparative performance evaluation and economic assessment between traditional and vibration-assisted EDM during machining of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part C.
27. Parida, S. P., Mishra, D., Padhy, R. L., Jena, P. C., Das, S. R., Basem, A. A., ... & Elsheikh, A. (2024). Effect of alkali treatment on mechanical and buckling behaviour of natural fiber reinforced composite cylinder. ES Materials and Manufacturing, 24, 1161.
28. Das, A., Kumar, A., Padhan, S., Das, S. R., Satpathy, M. P., & Patel, S. K. (2024). Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: Comparative machining performance evaluation and economic assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
29. Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. (2024). Comparative performance investigation and sustainability assessment between hot-AJM and AJM during machining of zirconia ceramic using Al₂O₃ abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
30. Das, S. R., & Dhupal, D. (2024). Simulation analysis during laser microgrooving of alumina ceramic. In Electro-micromachining and microfabrication (pp. 111–138).
31. Sethy, S., Rana, J., Sharma, P., Das, S. R., et al. (2024). Comparative performance investigation and sustainability assessment in EDM of SS316 using different dielectrics. Proceedings of the Institution of Mechanical Engineers, Part C.
32. Dhupal, D., Panigrahi, D., Rout, S., Bhuyan, R. K., Nayak, S., Jena, P. C., & Das, S. R. (2024). Generation of effusion holes on ultra-high temperature alloy by micro-EDM process. Surface Review and Letters, 31(02), 2450015.
33. Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Analysis on power consumption for life cycle sustainability assessment in hard turning of AISI 4140 steel under various cutting environments. Surface Review and Letters, 31(06), 1–26.
20. Babu, M. N., Anandan, V., Thomas, R., Babu, M. D., Das, S. R., & Parthasarathi, N. L. (2024). The behaviour of carbon quantum dots and cryogenic cooling in turning of super duplex F53 steel. Wear, 558, 205575.
21. Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Investigation on surface roughness and power consumption for sustainability assessment in hard turning of HSLA steel with SPPP-AlTiSiN–coated carbide tool under various cooling conditions. Lubrication Science, 36(8), 571–594.
22. Pradhan, S., Samantaray, S. R., Dhupal, D., & Das, S. R. (2024). Comparative performance evaluation between AJM and hot-AJM during machining of zirconia ceramic using silicon carbide abrasives. Surface Review and Letters.
23. Parida, S. P., Jena, P. C., Das, S. R., Basem, A., Khatua, A. K., & Elsheikh, A. H. (2024). Transverse vibration of laminated composite plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C.
24. Biswal, S., Das, S. R., Saha, N., & Mishra, P. C. (2024). Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environment, Development and Sustainability, 26(10), 26753–26784.
25. Das, A., Raman, R., Roy, S., Gajrani, K. K., Ghosh, S., Das, S. R., et al. (2024). Assessing the performance of ionic liquid-assisted minimum quantity lubrication during machining of biomedical-grade stainless steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
26. Panda, D., Sahu, S. K., & Das, S. R. (2024). Comparative performance evaluation and economic assessment between traditional and vibration-assisted EDM during machining of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part C.
27. Parida, S. P., Mishra, D., Padhy, R. L., Jena, P. C., Das, S. R., Basem, A. A., ... & Elsheikh, A. (2024). Effect of alkali treatment on mechanical and buckling behaviour of natural fiber reinforced composite cylinder. ES Materials and Manufacturing, 24, 1161.
28. Das, A., Kumar, A., Padhan, S., Das, S. R., Satpathy, M. P., & Patel, S. K. (2024). Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: Comparative machining performance evaluation and economic assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
29. Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. (2024). Comparative performance investigation and sustainability assessment between hot-AJM and AJM during machining of zirconia ceramic using Al₂O₃ abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46.
30. Das, S. R., & Dhupal, D. (2024). Simulation analysis during laser microgrooving of alumina ceramic. In Electro-micromachining and microfabrication (pp. 111–138).
31. Sethy, S., Rana, J., Sharma, P., Das, S. R., et al. (2024). Comparative performance investigation and sustainability assessment in EDM of SS316 using different dielectrics. Proceedings of the Institution of Mechanical Engineers, Part C.
32. Dhupal, D., Panigrahi, D., Rout, S., Bhuyan, R. K., Nayak, S., Jena, P. C., & Das, S. R. (2024). Generation of effusion holes on ultra-high temperature alloy by micro-EDM process. Surface Review and Letters, 31(02), 2450015.
33. Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Analysis on power consumption for life cycle sustainability assessment in hard turning of AISI 4140 steel under various cutting environments. Surface Review and Letters, 31(06), 1–26.
K. M. Sahu, A. Biswal, U Manisha and S. K. Swain* “ Synthesis and drug release kinetics of ciprofloxacin from polyacrylamide/dextran/carbon quantum dots (PAM/Dex/CQD) hydrogels”. International Journal of Biological Macromolecules, (Elsevier), 269(2), 132132 (2024). (Impact Factor: 8.5) ISSN: 1879-0003. DOI: https://doi.org/10.1016/j.ijbiomac.2024.132132
Sk. Nazrul, A. Biswal, K M Sahu, S S Sana and S. K. Swain* " Nano Silver Imprinted Starch-co-Polymethylmethacrylate Sandwiched Layered Double Hydroxide Nanocomposite Films for Packaging Application" Starch Strake (Wiley), 76(11-12), 2300106 (2024). (Impact Factor: 2.741) ISSN: 1521-379X. DOI: https://doi.org/10.1002/star.202300106
P K Behera, D Sahu, S K Swain and P Mohapatra* “Capsule-shaped nano silver-embedded reduced graphene oxide nanocomposites for sensing of mercury ions” Applied Nanoscience (Springer) 14, 353-361 (2024), (Impact Factor: 3), ISBN: 22996-1729. DOI: https://doi.org/10.1007/s13204-023-02980-6
J P Behera, S Patra, S K Najrul, S K surmma, D Kumar, M K Berma, A K Katare and S K Swain* “Nano Boron Nitride Laminated Poly(ethyl methacrylate)/Poly(vinyl alcohol) Composite Films Imprinted with Silver Nanoparticles as Gas Barrier and Bacteria Resistant Packaging Materials” Journal of Applied Polymer Science, 141(16), e55246, (Wiley), (2024). (Impact Factor: 3) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.20232930
S K Das, D Bharatiya, B Padhi. L Pradhan, B K Jena and S K Swain* “Effect of clay on TiO2 embedded PMMA nanocomposite for high-performance energy storage application” Journal of Energy Storage, 82, 110586 (Elsevier), (2024). (Impact Factor: 9.8) ISSN: 2352-1538. DOI: https://doi.org/10.1016/j.est.2024.110586
Sk. Nazrul, A. Biswal, L. Behera, and S. K. Swain*"Synthesis of sandwiched chitosan-g-PMMA nanocomposite by layered double hydroxides for packaging applications" Polymer Bulletin (Springer), 81(1), 633-660 (2024). (Impact Factor: 4) ISSN: 1436-2449. DOI: https://doi.org/101007/s00289-023-04732-6
B. Patra, A Biswal, S. Swain, L. Behera and S. K Swain “Role of Nano SiC in Enhancement of Mechanical, Barrier and Flame-Retardant Properties of PANI-co-PAA Films” Polymer-Plastic Technology and Materials, xx, xx-xx (Tylor & Francis), (2024). (Impact Factor: 3.0) ISSN: 2574-089X DOI: https://doi.org/10.1080/25740881.2023.2297963
S. Patra, K. M. Sahu, A A. Reddy and S K Swain* Polymer and Biopolymer Based Nanocomposites for Glucose Sensing, International Journal of Polymeric Materials and Polymeric Biomaterials 73(6), 490-521 (Tylor & Francis), (2024). (Impact Factor: 3.81) ISSN: 1563-535X. DOI: https://doi.org/10.1080/00914037.2023.2175824
K. M. Sahu, A. Biswal, U Manisha and S. K. Swain* “ Synthesis and drug release kinetics of ciprofloxacin from polyacrylamide/dextran/carbon quantum dots (PAM/Dex/CQD) hydrogels”. International Journal of Biological Macromolecules, (Elsevier), 269(2), 132132 (2024). (Impact Factor: 8.5) ISSN: 1879-0003. DOI: https://doi.org/10.1016/j.ijbiomac.2024.132132
Sk. Nazrul, A. Biswal, K M Sahu, S S Sana and S. K. Swain* " Nano Silver Imprinted Starch-co-Polymethylmethacrylate Sandwiched Layered Double Hydroxide Nanocomposite Films for Packaging Application" Starch Strake (Wiley), 76(11-12), 2300106 (2024). (Impact Factor: 2.741) ISSN: 1521-379X. DOI: https://doi.org/10.1002/star.202300106
P K Behera, D Sahu, S K Swain and P Mohapatra* “Capsule-shaped nano silver-embedded reduced graphene oxide nanocomposites for sensing of mercury ions” Applied Nanoscience (Springer) 14, 353-361 (2024), (Impact Factor: 3), ISBN: 22996-1729. DOI: https://doi.org/10.1007/s13204-023-02980-6
J P Behera, S Patra, S K Najrul, S K surmma, D Kumar, M K Berma, A K Katare and S K Swain* “Nano Boron Nitride Laminated Poly(ethyl methacrylate)/Poly(vinyl alcohol) Composite Films Imprinted with Silver Nanoparticles as Gas Barrier and Bacteria Resistant Packaging Materials” Journal of Applied Polymer Science, 141(16), e55246, (Wiley), (2024). (Impact Factor: 3) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.20232930
S K Das, D Bharatiya, B Padhi. L Pradhan, B K Jena and S K Swain* “Effect of clay on TiO2 embedded PMMA nanocomposite for high-performance energy storage application” Journal of Energy Storage, 82, 110586 (Elsevier), (2024). (Impact Factor: 9.8) ISSN: 2352-1538. DOI: https://doi.org/10.1016/j.est.2024.110586
Sk. Nazrul, A. Biswal, L. Behera, and S. K. Swain*"Synthesis of sandwiched chitosan-g-PMMA nanocomposite by layered double hydroxides for packaging applications" Polymer Bulletin (Springer), 81(1), 633-660 (2024). (Impact Factor: 4) ISSN: 1436-2449. DOI: https://doi.org/101007/s00289-023-04732-6
B. Patra, A Biswal, S. Swain, L. Behera and S. K Swain “Role of Nano SiC in Enhancement of Mechanical, Barrier and Flame-Retardant Properties of PANI-co-PAA Films” Polymer-Plastic Technology and Materials, xx, xx-xx (Tylor & Francis), (2024). (Impact Factor: 3.0) ISSN: 2574-089X DOI: https://doi.org/10.1080/25740881.2023.2297963
S. Patra, K. M. Sahu, A A. Reddy and S K Swain* Polymer and Biopolymer Based Nanocomposites for Glucose Sensing, International Journal of Polymeric Materials and Polymeric Biomaterials 73(6), 490-521 (Tylor & Francis), (2024). (Impact Factor: 3.81) ISSN: 1563-535X. DOI: https://doi.org/10.1080/00914037.2023.2175824
K. M. Sahu, A. Biswal, U Manisha and S. K. Swain* “ Synthesis and drug release kinetics of ciprofloxacin from polyacrylamide/dextran/carbon quantum dots (PAM/Dex/CQD) hydrogels”. International Journal of Biological Macromolecules, (Elsevier), 269(2), 132132 (2024). (Impact Factor: 8.5) ISSN: 1879-0003. DOI: https://doi.org/10.1016/j.ijbiomac.2024.132132
Sk. Nazrul, A. Biswal, K M Sahu, S S Sana and S. K. Swain* " Nano Silver Imprinted Starch-co-Polymethylmethacrylate Sandwiched Layered Double Hydroxide Nanocomposite Films for Packaging Application" Starch Strake (Wiley), 76(11-12), 2300106 (2024). (Impact Factor: 2.741) ISSN: 1521-379X. DOI: https://doi.org/10.1002/star.202300106
P K Behera, D Sahu, S K Swain and P Mohapatra* “Capsule-shaped nano silver-embedded reduced graphene oxide nanocomposites for sensing of mercury ions” Applied Nanoscience (Springer) 14, 353-361 (2024), (Impact Factor: 3), ISBN: 22996-1729. DOI: https://doi.org/10.1007/s13204-023-02980-6
J P Behera, S Patra, S K Najrul, S K surmma, D Kumar, M K Berma, A K Katare and S K Swain* “Nano Boron Nitride Laminated Poly(ethyl methacrylate)/Poly(vinyl alcohol) Composite Films Imprinted with Silver Nanoparticles as Gas Barrier and Bacteria Resistant Packaging Materials” Journal of Applied Polymer Science, 141(16), e55246, (Wiley), (2024). (Impact Factor: 3) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.20232930
S K Das, D Bharatiya, B Padhi. L Pradhan, B K Jena and S K Swain* “Effect of clay on TiO2 embedded PMMA nanocomposite for high-performance energy storage application” Journal of Energy Storage, 82, 110586 (Elsevier), (2024). (Impact Factor: 9.8) ISSN: 2352-1538. DOI: https://doi.org/10.1016/j.est.2024.110586
Sk. Nazrul, A. Biswal, L. Behera, and S. K. Swain*"Synthesis of sandwiched chitosan-g-PMMA nanocomposite by layered double hydroxides for packaging applications" Polymer Bulletin (Springer), 81(1), 633-660 (2024). (Impact Factor: 4) ISSN: 1436-2449. DOI: https://doi.org/101007/s00289-023-04732-6
B. Patra, A Biswal, S. Swain, L. Behera and S. K Swain “Role of Nano SiC in Enhancement of Mechanical, Barrier and Flame-Retardant Properties of PANI-co-PAA Films” Polymer-Plastic Technology and Materials, xx, xx-xx (Tylor & Francis), (2024). (Impact Factor: 3.0) ISSN: 2574-089X DOI: https://doi.org/10.1080/25740881.2023.2297963
S. Patra, K. M. Sahu, A A. Reddy and S K Swain* Polymer and Biopolymer Based Nanocomposites for Glucose Sensing, International Journal of Polymeric Materials and Polymeric Biomaterials 73(6), 490-521 (Tylor & Francis), (2024). (Impact Factor: 3.81) ISSN: 1563-535X. DOI: https://doi.org/10.1080/00914037.2023.2175824
K. M. Sahu, A. Biswal, U Manisha and S. K. Swain* “ Synthesis and drug release kinetics of ciprofloxacin from polyacrylamide/dextran/carbon quantum dots (PAM/Dex/CQD) hydrogels”. International Journal of Biological Macromolecules, (Elsevier), 269(2), 132132 (2024). (Impact Factor: 8.5) ISSN: 1879-0003. DOI: https://doi.org/10.1016/j.ijbiomac.2024.132132
Sk. Nazrul, A. Biswal, K M Sahu, S S Sana and S. K. Swain* " Nano Silver Imprinted Starch-co-Polymethylmethacrylate Sandwiched Layered Double Hydroxide Nanocomposite Films for Packaging Application" Starch Strake (Wiley), 76(11-12), 2300106 (2024). (Impact Factor: 2.741) ISSN: 1521-379X. DOI: https://doi.org/10.1002/star.202300106
P K Behera, D Sahu, S K Swain and P Mohapatra* “Capsule-shaped nano silver-embedded reduced graphene oxide nanocomposites for sensing of mercury ions” Applied Nanoscience (Springer) 14, 353-361 (2024), (Impact Factor: 3), ISBN: 22996-1729. DOI: https://doi.org/10.1007/s13204-023-02980-6
J P Behera, S Patra, S K Najrul, S K surmma, D Kumar, M K Berma, A K Katare and S K Swain* “Nano Boron Nitride Laminated Poly(ethyl methacrylate)/Poly(vinyl alcohol) Composite Films Imprinted with Silver Nanoparticles as Gas Barrier and Bacteria Resistant Packaging Materials” Journal of Applied Polymer Science, 141(16), e55246, (Wiley), (2024). (Impact Factor: 3) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.20232930
S K Das, D Bharatiya, B Padhi. L Pradhan, B K Jena and S K Swain* “Effect of clay on TiO2 embedded PMMA nanocomposite for high-performance energy storage application” Journal of Energy Storage, 82, 110586 (Elsevier), (2024). (Impact Factor: 9.8) ISSN: 2352-1538. DOI: https://doi.org/10.1016/j.est.2024.110586
Sk. Nazrul, A. Biswal, L. Behera, and S. K. Swain*"Synthesis of sandwiched chitosan-g-PMMA nanocomposite by layered double hydroxides for packaging applications" Polymer Bulletin (Springer), 81(1), 633-660 (2024). (Impact Factor: 4) ISSN: 1436-2449. DOI: https://doi.org/101007/s00289-023-04732-6
B. Patra, A Biswal, S. Swain, L. Behera and S. K Swain “Role of Nano SiC in Enhancement of Mechanical, Barrier and Flame-Retardant Properties of PANI-co-PAA Films” Polymer-Plastic Technology and Materials, xx, xx-xx (Tylor & Francis), (2024). (Impact Factor: 3.0) ISSN: 2574-089X DOI: https://doi.org/10.1080/25740881.2023.2297963
S. Patra, K. M. Sahu, A A. Reddy and S K Swain* Polymer and Biopolymer Based Nanocomposites for Glucose Sensing, International Journal of Polymeric Materials and Polymeric Biomaterials 73(6), 490-521 (Tylor & Francis), (2024). (Impact Factor: 3.81) ISSN: 1563-535X. DOI: https://doi.org/10.1080/00914037.2023.2175824
K. M. Sahu, A. Biswal, U Manisha and S. K. Swain* “ Synthesis and drug release kinetics of ciprofloxacin from polyacrylamide/dextran/carbon quantum dots (PAM/Dex/CQD) hydrogels”. International Journal of Biological Macromolecules, (Elsevier), 269(2), 132132 (2024). (Impact Factor: 8.5) ISSN: 1879-0003. DOI: https://doi.org/10.1016/j.ijbiomac.2024.132132
Sk. Nazrul, A. Biswal, K M Sahu, S S Sana and S. K. Swain* " Nano Silver Imprinted Starch-co-Polymethylmethacrylate Sandwiched Layered Double Hydroxide Nanocomposite Films for Packaging Application" Starch Strake (Wiley), 76(11-12), 2300106 (2024). (Impact Factor: 2.741) ISSN: 1521-379X. DOI: https://doi.org/10.1002/star.202300106
P K Behera, D Sahu, S K Swain and P Mohapatra* “Capsule-shaped nano silver-embedded reduced graphene oxide nanocomposites for sensing of mercury ions” Applied Nanoscience (Springer) 14, 353-361 (2024), (Impact Factor: 3), ISBN: 22996-1729. DOI: https://doi.org/10.1007/s13204-023-02980-6
J P Behera, S Patra, S K Najrul, S K surmma, D Kumar, M K Berma, A K Katare and S K Swain* “Nano Boron Nitride Laminated Poly(ethyl methacrylate)/Poly(vinyl alcohol) Composite Films Imprinted with Silver Nanoparticles as Gas Barrier and Bacteria Resistant Packaging Materials” Journal of Applied Polymer Science, 141(16), e55246, (Wiley), (2024). (Impact Factor: 3) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.20232930
S K Das, D Bharatiya, B Padhi. L Pradhan, B K Jena and S K Swain* “Effect of clay on TiO2 embedded PMMA nanocomposite for high-performance energy storage application” Journal of Energy Storage, 82, 110586 (Elsevier), (2024). (Impact Factor: 9.8) ISSN: 2352-1538. DOI: https://doi.org/10.1016/j.est.2024.110586
Sk. Nazrul, A. Biswal, L. Behera, and S. K. Swain*"Synthesis of sandwiched chitosan-g-PMMA nanocomposite by layered double hydroxides for packaging applications" Polymer Bulletin (Springer), 81(1), 633-660 (2024). (Impact Factor: 4) ISSN: 1436-2449. DOI: https://doi.org/101007/s00289-023-04732-6
B. Patra, A Biswal, S. Swain, L. Behera and S. K Swain “Role of Nano SiC in Enhancement of Mechanical, Barrier and Flame-Retardant Properties of PANI-co-PAA Films” Polymer-Plastic Technology and Materials, xx, xx-xx (Tylor & Francis), (2024). (Impact Factor: 3.0) ISSN: 2574-089X DOI: https://doi.org/10.1080/25740881.2023.2297963
S. Patra, K. M. Sahu, A A. Reddy and S K Swain* Polymer and Biopolymer Based Nanocomposites for Glucose Sensing, International Journal of Polymeric Materials and Polymeric Biomaterials 73(6), 490-521 (Tylor & Francis), (2024). (Impact Factor: 3.81) ISSN: 1563-535X. DOI: https://doi.org/10.1080/00914037.2023.2175824
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
P. K. Ray, H. K. Sahoo, A. Mohanty, J. K. Bhutto, A. B. Barnawi and A. A. Alshaya, "Robust H-Infinity Filter and PSO-SVM Based Monitoring of Power Quality Disturbances System," in IEEE Access, vol. 12, pp. 39041-39057, 2024, doi: 10.1109/ACCESS.2024.3367727
Sahoo, S., Sahoo, H.K., Nanda, S. et al. Extreme learning machine and correntropy criterion-based hybrid precoder for 5G wireless communication systems. SIViP 18 (Suppl 1), 935–944 (2024). https://doi.org/10.1007/s11760-024-03205-1
Ghadei, L., Sahoo, H.K. Spatial modulation and recurrent neural network based equalizer for MIMO communication systems. Int. j. inf. tecnol. 16, 4573–4587 (2024). https://doi.org/10.1007/s41870-024-02063-x
P. K. Ray, H. K. Sahoo, A. Mohanty, J. K. Bhutto, A. B. Barnawi and A. A. Alshaya, "Robust H-Infinity Filter and PSO-SVM Based Monitoring of Power Quality Disturbances System," in IEEE Access, vol. 12, pp. 39041-39057, 2024, doi: 10.1109/ACCESS.2024.3367727
Sahoo, S., Sahoo, H.K., Nanda, S. et al. Extreme learning machine and correntropy criterion-based hybrid precoder for 5G wireless communication systems. SIViP 18 (Suppl 1), 935–944 (2024). https://doi.org/10.1007/s11760-024-03205-1
Ghadei, L., Sahoo, H.K. Spatial modulation and recurrent neural network based equalizer for MIMO communication systems. Int. j. inf. tecnol. 16, 4573–4587 (2024). https://doi.org/10.1007/s41870-024-02063-x
Sahoo, D. R., & Biswal, T*. (2024) Synthesis and characterization of poly (Acrylamide-co-acrylic acid)/chitosan (derived from (fish scales) for controlled release of Amoxicillin drug, Polymer Engineering and Science. DOI:10.1002/pen.26653. (Scopus, SCI, IF: 2.573)
Sahoo, D. R., & Biswal, T*. (2024). Study of antibacterial and mechanical properties of poly (methyl methacrylate?co?acrylic acid)/hydroxyapatite biocomposite by using artificial neural network approach. SPE Polymers. 1?13.doi:10.1002/pls2.10117. (Scopus)
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Aquila Optimization Based Artificial Pancreas (AP) for Control of BG Level in TIDM Patient, 3rd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), IEEE, 10.1109/ODICON62106.2024.10797636, 24 December 2024
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023
A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023
P. K. Ray, H. K. Sahoo, A. Mohanty, J. K. Bhutto, A. B. Barnawi and A. A. Alshaya, "Robust H-Infinity Filter and PSO-SVM Based Monitoring of Power Quality Disturbances System," in IEEE Access, vol. 12, pp. 39041-39057, 2024, doi: 10.1109/ACCESS.2024.3367727
Sahoo, S., Sahoo, H.K., Nanda, S. et al. Extreme learning machine and correntropy criterion-based hybrid precoder for 5G wireless communication systems. SIViP 18 (Suppl 1), 935–944 (2024). https://doi.org/10.1007/s11760-024-03205-1
Ghadei, L., Sahoo, H.K. Spatial modulation and recurrent neural network based equalizer for MIMO communication systems. Int. j. inf. tecnol. 16, 4573–4587 (2024). https://doi.org/10.1007/s41870-024-02063-x
P. K. Ray, H. K. Sahoo, A. Mohanty, J. K. Bhutto, A. B. Barnawi and A. A. Alshaya, "Robust H-Infinity Filter and PSO-SVM Based Monitoring of Power Quality Disturbances System," in IEEE Access, vol. 12, pp. 39041-39057, 2024, doi: 10.1109/ACCESS.2024.3367727
Sahoo, S., Sahoo, H.K., Nanda, S. et al. Extreme learning machine and correntropy criterion-based hybrid precoder for 5G wireless communication systems. SIViP 18 (Suppl 1), 935–944 (2024). https://doi.org/10.1007/s11760-024-03205-1
Ghadei, L., Sahoo, H.K. Spatial modulation and recurrent neural network based equalizer for MIMO communication systems. Int. j. inf. tecnol. 16, 4573–4587 (2024). https://doi.org/10.1007/s41870-024-02063-x
A. Mallick, J. K. Pradhan, R. Pradhan, K. S. K. Achary, S. Rath, A. Guha, "A Gain Scheduling Control Framework for Mitigation of Time Varying Network Latency in Autonomous AC Microgrids", IEEE Transactions on Industrial Informatics, 2024 (Impact Factor: 11:7)
I Rout, TR Mahapatra, P Mishra, D Mishra, and Samy R. Mahmoud (2024) Characterization and static responses of partially biodegradable hybrid composites: Experimental and numerical analysis, Structural Engineering and Mechanics. 92(5), 485-501. https://doi.org/10.12989/sem.2024.92.5.485 (IF: 2.2, SCIE)
B. Dash, T. R. Mahapatra, P. Mishra, D. Mishra, S. R. Mahmoud, (2024) A Review of Computational Methods for Vibroacoustic Analysis of Advanced Material Structures. Archives of Computational Methods in Engineering. 1-25. Doi: 10.1007/s11831-024-10204-5. (IF: 9.7, SCIE)
B. P. Mishra, D. Mishra, T. R. Mahapatra, P. K. Sahoo, P. Panda, (2024) Performance analysis of uncoated and coated (TiN-, TiAlN-) carbide drills in drilling graphene-reinforced GF/epoxy nanocomposites: Analytical and experimental study. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 0(0). doi:10.1177/09544089241291001. (IF: 2.3, SCI)
B. Dash, T. R. Mahapatra, D. Mishra, (2024) Numerical vibroacoustic analysis of multi-layered composite structure under hygrothermal loading using coupled FEM-IBEM micromechanical model. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 238(8): 3549-3577. doi:10.1177/09544062231205359. (IF: 1.8, SCI)
B. P. Mishra, D. Mishra, P. Panda, P. Senapati, T. R. Mahapatra, (2024) Experimental investigation and FEA implementation on drilling of graphene reinforced GF/epoxy polymer nano composite laminate using coated and uncoated carbide drills. International Journal of Machining and Machinability of Materials 26:3, 193-222. (IF: 2.4, SCOPUS)
S. Muduli, T. R. Mahapatra, A. V. K. Murty, S. R. Parimanik, D. Mishra, P. C. Padhi, (2024) Supervised Machine Learning Algorithms for Machinability Assessment of Graphene Reinforced Aluminium Metal Matrix Composites. Smart Technologies for Improved Performance of Manufacturing Systems and Services 163-180.
SR Parimanik, AK Mahapatra, TR Mahapatra, D Mishra (2024) Parametric analysis of Nd: YAG laser welding of NiTi SMA wires using Taguchi quality loss and grey relational method, Materials Today: Proceedings https://doi.org/10.1016/j.matpr.2024.02.021, (IF: 2.59, SCOPUS)
L Mishra, TR Mahapatra, D Mishra, SR Parimanik, AK Rout (2024) Parametric optimization of hole quality in Nd: YAG laser drilled carbon black/epoxy composite by grey based whale optimization technique, Materials Today: Proceedings https://doi.org/10.1016/j.matpr.2024.02.022, (IF: 2.59, SCOPUS)
J Das, AK Rout, SR Parimanik, I Rout, TR Mahapatra, D Mishra (2024) Dynamic Mechanical and Static Analysis of Kevlar Fiber Reinforced Epoxy Composites Incorporated with Egg Shell Particle, Suranaree Journal of Science and Technology. 31(1):010273(1-10), DOI: https://doi.org/10.55766/sujst-2024-01-e0892. (IF: 0.214, Scopus)
L Mishra, TR Mahapatra, D Mishra, P Mishra, PC Padhi (2024) Study of Nd: YAG laser micro-drilling machinability and parametric optimization of graphite/Epoxy and carbon black/Epoxy nanocomposites, Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems. 2024;0(0). doi:10.1177/23977914231217921, (IF: 4.1, ESCI, SCOPUS)
B. Dash, T. R. Mahapatra, D. Mishra, (2024) Vibroacoustic Characterization of Multi-layered Composite Structure Under Hygrothermal Load Using Higher-Order FEM-IBEM Micromechanical Model. Journal of Vibration Engineering & Technologies, Vol. 12, No. 2, 1725-1751, doi: 10.1007/s42417-023-00939-z. (IF: 2.7, SCIE, SCOPUS)
L Mishra, TR Mahapatra, D Mishra, AK Rout (2024) Laser micro-drilling of CNT reinforced polymer nanocomposite: A parametric study using RSM and APSO, Advances in Materials Research 13 (1), 1-18, DOI: https://doi.org/10.12989/amr.2024.13.1.001, (IF: 3.8, ESCI, SCOPUS)
I Rout, TR Mahapatra, P Mishra, D Mishra (2024) Free Vibration and Acoustic Responses of Partially Biodegradable Hybrid Composites: Numerical Analysis and Experimental Validation, Journal of Vibration Engineering and Technologies, https://doi.org/10.1007/s42417-023-01254-3, (IF: 2.7, SCIE, SCOPUS)
D K Sahu, P. P. Tripathy, T. R. Mahapatra, P. Mishra, and D. Mishra (2024) Design optimization of structural component (hitch bracket of tractor): A reverse engineering approach, Structural Engineering and Mechanics, 89(5), 467-477, https://doi.org/10.12989/sem.2024.89.5.467, (IF: 2.2, SCIE, SCOPUS)
B Dash, TR Mahapatra, P Mishra, D Mishra (2024) Hygrothermal sound radiation analysis of layered composite plate using HFEM-IBEM micromechanical model and experimental validation, Structural Engineering and Mechanics, Vol. 89, No. 3, 265-281, https://doi.org/10.12989/sem.2024.89.3.265, (IF: 2.2, SCIE, SCOPUS)
L. Mishra, T. R. Mahapatra, D. Mishra, S. R. Parimanik, (2024) Investigation of laser micro-drilling machinability and performance optimization of polymer nanocomposites reinforced with different carbon allotropes. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. Vol. 238, No. 3. 1354-1371, doi:10.1177/09544089231158898. (IF: 2.4, SCI)
N. Marati, Gyan R. Biswal, Phaneendra B. Bobba, and D. Prasad, "IIR Filter Based Compensator with Modified Feedback Repetitive Control Scheme of Voltage Source Inverter for Non-Linear Load Applications", Electrical Engineering, Springer, Vol. 106, No. 3, pp. 7181-7195, Jun. 2024. DOI: 10.1007/s00202-024-02418-4 (IF: 1.8)
A. Mallick, J. K. Pradhan, R. Pradhan, K. S. K. Achary, S. Rath, A. Guha, "A Gain Scheduling Control Framework for Mitigation of Time Varying Network Latency in Autonomous AC Microgrids", IEEE Transactions on Industrial Informatics, 2024 (Impact Factor: 11:7)
Antibacterial and Cytotoxicity Studies of Pyrrolo-based Organic Scaffolds and Their Binding Interaction with Bovine Serum Albumin, Rosalin Das, Pragyan P. Dash, Ajit K. Bishoyi, Patitapaban Mohanty, Lokanath Mishra, Laxmipriya Prusty, Chita R. Sahoo, Rabindra N. Padhy, Monalisa Mishra, Harekrushna Sahoo, Suban K. Sahoo, Santosh K. Sethi*, Bigyan R. Jali,* Naunyn-Schmiedeberg's Archives of Pharmacology, 2024.
Advances on fluorescence chemosensors for selective detection of water, Pragyan Parimita Dash, Arup Kumar Ghosh, Patitapaban Mohanty, Rubi Behura, Sunita Behera, Suban K. Sahoo, Bigyan R. Jali*, Talanta, 2024, 275, 126089
Thiourea Functionalised Receptor for Selective Detection of Mercury Ions and its Application in Serum Sample, Patitapaban Mohanty, Pragyan Parimita Dash, Swagatika Mishra, Renjith Bhaskaran, Bigyan R. Jali* Journal of Fluorescence 2024.
Synergistic effect of gold nanoparticles decorated functionalized carbon nanotubes nanohybrids on the thermal, dielectric, and sensing properties of polyaniline ternary nanocomposites, Lipsa Shubhadarshinee, Pooja Mohapatra, Shreelata Behera, Bigyan R. Jali, Aruna Kumar Barick*, Priyaranjan Mohapatra* Journal of Applied Polymer Science, 2024.
Detecting Moisture in Building Materials and Commercial Food adducts by 2-Hydroxy-naphthaldehyde Derived Chromo-fluorogenic Chemosensor Pragyan Paramita Dash, Patitapaban Mohanty, Swagatika Mishra, Renjith Bhaskaran, Suban Kumar Sahoo, Priyaranjan Mohapatra, Aruna Kumar Barick, Bigyan Ranjan Jali*, Journal of Fluorescence 2024
Pyrene excimer-based fluorescent chemosensor for cascade detection of Zn(II) and phosphate ions and its applications, Kanishk Bhardwaj, Ritambhara Jangir, Bigyan Ranjan Jali, Suban K. Sahoo, Inorganica Chimica Acta 2024
“Unveiling the Antibacterial and antifungal potential of biosynthesized silver nanoparticles from Chromolaena odorata leaves”, Ajit Kumar Bishoyi, Chita Ranjan Sahoo, Priyanka Samal, Nilima Priyadarsini Mishra, Bigyan Ranjan Jali*, Mohd Shahnawaz Khan*, Rabindra Nath Padhy*. Scientific Reports, 2024
Fluorescent ovalbumin-functionalized gold nanocluster as a highly sensitive and selective sensor for relay detection of salicylaldehyde, Hg(II) and folic acid Rajanee Nakum, Arup K. Ghosh, Bigyan Ranjan Jali, Suban K. Sahoo Spectrochimica Acta Part A 2024
Protein Interaction and Molecular Docking Analysis by Schiff base Derived from 2,4-dinitro phenyl hydrazine Tapan K. Rana, Patitapaban Mohanty, Pragyan P. Dash, Priyaranjan Mohapatra, Aruna K. Barick, Pradip K. Jena,Lingaraj Behera, Bigyan R. Jalib, J. of Molecular and Engineering Materials 2024.
A Simple Method for Synthesizing Nitrogen-Doped Carbon Quantum Dots for Fluorescent "Turn off" Mercury (II) Ion Sensing Prafulla Kumar Behera, Deepak Sahu, Bigyan Ranjan Jali, Aruna Kumar Barick, Sarat Kumar Swain, Priyaranjan Mohapatra, Journal of Fluorescence 2024
Folic acid detection using ?-cyclodextrin functionalized coper nanoclusters and vitamin B6 cofactor pyridoxal. Yagnik Vegad, Seshu Vardha, Arup Ghosh, Bigyan R. Jali, Suban K. Sahoo, ACS Applied Nano Materials 2024
Review on synthesis and characterization of metal nanoparticles doped carbon nanofillers based nanohybrids reinforced polyaniline nanocomposites, Lipsa Shubhadarshinee, Pooja Mohapatra, Shreelata Behera, Bigyan Ranjan Jali, Priyaranjan Mohapatra and Aruna Kumar Barick, Polymer-Plastics Technology and Materials 2024
A Short Review on Schiff bases and Their Derivatives as a Versatile Molecular Probe. Soumya Ranjan Kar, Sankalpa Narayana Panda, Patitapaban Mohanty, Pragyan Parimita Dash, Aruna Kumar Barick, Priyaranjan Mohapatra, Debasis Mohanty, and Bigyan Ranjan Jali*, Letters in Applied NanoBioScience, 2024
Cation, Anion and Protein Interaction of Schiff bases and Their Derivatives: A Mini Review. Rubi Behura, Patitapaban Mohanty, Pragyan Parimita Dash, Swagatika Mishra, Sunita Behera, Pooja Mohapatra, Aruna Kumar Barick, Priyaranjan Mohapatra, Bigyan R. Jali*, Letters in Applied NanoBioScience, 2024.
Swadhin Kumar Mishra, Aruananshu Mahapatro and Prabina Pattanayak. Meta-heuristic optimization techniques for scheduling in multiple-input multiple-output multiple-access channel system. Int J Commun Syst. 2024; 37(13):e5821. doi:10.1002/dac.5821
Radhasyam Patro and Arunanshu Mahapatro. Transmission Diversity by Alamouti-Coding, Propagation Control by IRS in CDMA-FBMC-OQAM System. IETE Journal of Research, 1–19. https://doi.org/10.1080/03772063.2024.2396052
Sangeeta Sa and Arunanshu Mahapatro. A composite channel hopping algorithm for blind rendezvous in heterogeneous cognitive radio networks. Telecommun Syst (2024). https://doi.org/10.1007/s11235-024-01123-8
Radhasyam Patro and Arunanshu Mahapatro. Reconfigurable Intelligent Surface-based Propagation Control in FBMC/OQAM Systems. Journal of Telecommunications and Information Technology, 83–90, 2024.
V CH Sekhar Rao Rayavarapu and Arunanshu Mahapatro. MOANS DV-Hop: An anchor node subset based localization algorithm for wireless sensor networks. Ad Hoc Networks, Elsevier, Vol. 152, 2024.
P. K. Ray, H. K. Sahoo, A. Mohanty, J. K. Bhutto, A. B. Barnawi and A. A. Alshaya, "Robust H-Infinity Filter and PSO-SVM Based Monitoring of Power Quality Disturbances System," in IEEE Access, vol. 12, pp. 39041-39057, 2024, doi: 10.1109/ACCESS.2024.3367727
Sahoo, S., Sahoo, H.K., Nanda, S. et al. Extreme learning machine and correntropy criterion-based hybrid precoder for 5G wireless communication systems. SIViP 18 (Suppl 1), 935–944 (2024). https://doi.org/10.1007/s11760-024-03205-1
Ghadei, L., Sahoo, H.K. Spatial modulation and recurrent neural network based equalizer for MIMO communication systems. Int. j. inf. tecnol. 16, 4573–4587 (2024). https://doi.org/10.1007/s41870-024-02063-x
J Alam, S Panda Exploring Tribological Behaviors of Profile-Shifted Spur Gears: An Experimental Investigation,2024, https://doi.org/10.1080/10402004.2024.2369185
S. Sahoo, P. Patro and H. Barik, Thermal and hydrodynamic analysis of nanofluid flow in a circular pipe using euler-granular mixture model, Multiphase Science and Technology 36 (3), 79-99, (2024).
D. K. Sethy and P. Patro, Parametric study and development of a correlation for Nusselt number in Nanofluid jet impingement, Multiphase Science and Technology, 36(3), 1-18 (2024).
Rajesh Kumar Srivastava, Prakash Kumar Sarangi, Akhilesh Kumar Singh, Krushna Prasad Shadangi, Uttam Kumar Sahoo, Vivekanand Vivekanand, Arivalagan Pugazhendhi, Sanjukta Subudhi, Minaxi Sharma, Vijai Kumar Gupta. Unearthing the potential of organic biowastes via microbial fermentation for production of CH4 and H2/biohythane. Biomass and Bioenergy.190, (2024), 107427.
Prakash Kumar Sarangi, Rajesh Kumar Srivastava, Akhilesh Kumar Singh, Krushna Prasad Shadangi, Vivekanand Vivekanand, Sanjukta Subudhi, Thangjam Anand Singh, Uttam Kumar Sahoo, Piotr Prus, Laura ?muleac, Raul Pa?calau, Florin Imbrea. Sustainable hydrogen through decomposition of ammonia and its derivatives by thermochemical processes: a review. International Agrophysics. 38,4 (2024), 325-344.
Abu Taher Ali, Krushna Prasad Shadangi, Deo Karan Ram, Vacuum pyrolysis of Tamanu seed (Calophyllum inophyllum): Fuel properties, distillation, and composition study of the pyrolytic oil. Journal of the Taiwan Institute of Chemical Engineers. 162, (2024), 105603.
Munmi Bhattacharyya, Krushna Prasad Shadangi, Rishiraj Purkayastha, Pinakeswar Mahanta, Kaustubha Mohanty, Catalytic upgradation of pyrolytic products by catalytic pyrolysis of sawdust using a synthesized composite catalyst of NiO and Ni (II) aluminates. Renewable Energy 221, (2024) 119658.
Swagatika Mishra, Punyapriya Mishra, Deepak Kumar Mohapatra, Punyatoya Mishra, Dinesh Kumar Mishra, Krushna Prasad Shadangi. Study of frequency dependence properties of CCTO-BT/polymer composites. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 238(6): (2024) 2140-2149.
Prakash Kumar Sarangi, Rajesh Kumar Srivastava, Uttam Kumar Sahoo, Akhilesh Kumar Singh, Jigisha Parikh, Shama Bansod, Ganesh Parsai, Mohammad Luqman, Krushna Prasad Shadangi, Deepti Diwan, Deborah Lanterbecq, Minaxi Sharma, Biotechnological innovations in nanocellulose production from waste biomass with a focus on pineapple waste. Chemosphere 349, (2024) 140833.
Rudra Narayan Mohapatro, Ranjita Swain, Sunita Routray, Krushna Prasad Shadangi, Satyabrata Mohanta, Prakash Kumar Sarangi, Anjani R.K. Gollakota, Recovery of Filler Material from Mining Waste: Techno-economic, and Kinetic Study. Process Safety and Environmental Protection, 2024, ISSN 0957-5820.
Amit Kumar Behera, Krushna Prasad Shadangi, Prakash Kumar Sarangi, Efficient removal of Rhodamine B dye using biochar as an adsorbent: Study the performance, kinetics, thermodynamics, adsorption isotherms and its reusability. Chemosphere, (2024) 354, 141702. ISSN 0045-6535.
Latika Bhatia, Prakash Kumar Sarangi, Krushna Prasad Shadangi, Rajesh K Srivastava, Uttam Kumar Sahoo, Akhilesh Kumar Singh, Eldon R Rene, Bikash Kumar. A Systematic Review on Photocatalytic Biohydrogen Production from Waste Biomass. BioEnergy Research (2024);17(2),932-955.
Munmi Bhattacharyya, Krushna Prasad Shadangi, Rishiraj Purkayastha, Pinakeswar Mahanta, Kaustubha Mohanty. Co-pyrolysis of Coal and Biomass Blends: Impact of Pyrolysis Temperature and Biomass Blending on Thermal Stability of Coal, and Composition of Pyrolysis Products. Process Safety and Environmental Protection. (2024)187, 1010-1021.
Biswaranjan Achrya, Sucheta Panda and Niranjan K Ray, “Multiprocessor Task Scheduling Optimization for Cyber-Physical System using an Improved Salp Swarm Optimization Algorithm”, SN Computer Science, Springer, Scopus, Impact Factor- 3.78, SN Computer Science (2024) 5:184 https://doi.org/10.1007/s42979-023-02517-2.
Dakhya Prasad Pati and Sucheta Panda, “Performance Evaluation of Modified Gaussian Mixture Model Algorithm for Image Segmentation of Mammogram”,International Journal of Embedded Systems, InderScience Publishers, https://doi.org/10.1504/IJES.2023.139207 Impact Factor – 0.5, Scopus, pp. 312-322, June 2024.
Soumya Ranjan Sahu and Sucheta Panda, “A Novel Depth-wise Separable Convolutional Model for Remote Sensing Scene Classification” Journal of the Indian Society of Remote Sensing(ISRS), https://doi.org/10.1007/s12524-024-01904-3, 2024,Impact Factor – 2.2,Springer, SCIE,Scopus.
Anchal Kumawat, Sucheta Panda, Vassilis C. Gerogiannis, Andreas Kanavos, Biswaranjan Acharya , Stella Manika , “A Hybrid Approach for Image Acquisition Methods based on Feature Based Image Registration”, Journal of Imaging(Section: Image and Video Processing), Received :6 June 2024,Revised:6 September 2024,Accepted : 11 September 2024, Published : 14 September 2024, 10(9), 228. https://doi.org/10.3390/ jimaging10090228, Impact Factor – 2.7,MDPI, Scopus.
Srichandan, Suresh Kumar, et al. "A Secure and Distributed Placement for Quality of Service-Aware IoT Requests in Fog-Cloud of Things: A Novel Joint Algorithmic Approach." IEEE Access (2024).
Srichandan, Suresh Kumar, et al. "Efficient latency-and-energy-aware IoT-fog-cloud task orchestration: novel algorithmic approach with enhanced arithmetic optimization and pattern search." International Journal of Information Technology 16.5 (2024): 3311-3324.
Manjunatha, D., Vishwakarma, V., Mishra, A., Ravindran, R. E., & Kumari, K. (2024). Kidney Stone Detection Using Ultrasonographic Images by Support Vector Machine Classification. Nanotechnology Perceptions, 93-106.
P.K. Bhuyan, J. Meher and L. Mohanty (2024) Soil erosion estimation using RUSLE: a case study of Bamnidhi sub basin, Volume 30, 2024 - Issue 2, Pages 273-280, https://doi.org/10.1080/09715010.2024.2301721
Bijay Kumar Sa, Rutuparna Panda, and Sanjay Agrawal. "Adaptive Spatially-Weighted Region-Based Active Contour." International Journal of Image and Graphics (2024). DOI: 10.1142/S0219467826500208
Mahapatra, Sakambhari, et al. "A Review on Retinal Blood Vessel Enhancement and Segmentation Techniques for Color Fundus Photography." Critical Reviews™ in Biomedical Engineering 52.1 (2024).
Behera, S, Numerical treatment of the KP-MEW equation and the Konno-Oono equation using the first-integral method, Partial Differential Equations in Applied Mathematics (2024): 100846.https://doi.org/10.1016/j.padiff.2024.100846
Behera S, Virdi JPS, Analytical solutions fractional order partial differential equations arising in fluid dynamics, Applied Mathematics-A Journal of Chinese Universities,2024 . (SCIE , I/F-1.2 )
Behera, S, Mohanty , S, Rezazadeh, H, Akinyemi, L. Dynamical Properties and Novel Wave Solutions of Ion Sound Langmuir Wave Equation in Fluid Dynamics, Nonlinear Opt Quantum Opt (2024). (ESCI , Scopus, I/F-0.26 )
Behera, S. Optical solitons for the Hirota-Ramnai eqution via improved (G’/G2)-expansion method, Mod. Phys. Lett. B, ,2450403 (2024). https://doi.org/10.1142/S0217984924504037 (SCI, I/F-1.8, Cite Score-3.7)
Behera, S. Multiple soliton solutions of some conformable fractional nonlinear models using Sine–Cosine method. Opt Quant Electron 56, 1235 (2024). https://doi.org/10.1007/s11082-024-06403-w (SCI, I/F-3.3)
Behera, S., Aljahdaly, N.H. Soliton Solutions of Nonlinear Geophysical Kdv Equation Via Two Analytical Methods. Int J Theor Phys 63, 107 (2024). https://doi.org/10.1007/s10773-024-05647-2 (SCIE, I/F-1.3)
"Enhancing Energy Efficiency in Sensor Cloud Through Time Series Forecasting of Sensor Data", Kalyan Das, Satyabrata Das & Monalisha Pattnaik, Instrumentation Mesure Metrologie, IIETA 2024, (Scopus), https://doi.org/10.18280/i2m.230102
Gorle, Venkata Lakshmi Narayana, and S. Panigrahi. "A semi-supervised Anti-Fraud model based on integrated XGBoost and BiGRU with self-attention network: an application to internet loan fraud detection." Multimedia Tools and Applications 83, no. 19 (2024): 56939-56964.
D. Konhar, Ananda Kumar Behera, Suvendu Narayan Mishra & Debasis Mishra, “Triple Band-reject Compact Sectoral Antenna Using T-, Y- and Inverted L-Shaped Strips”, IETE Journal of Research, 2024, ol. 70, No. 8, pp. 6727–6733 https://doi.org/10.1080/03772063.2024.2313041(SCIE, SCOPUS)
D. Konhar, “Design of Planar antennas in Ku- and S/C- Band using Fibonacci Slot”, IETE Journal of Research, 2024, Vol. 70, No. 7, pp. 6135–6145, 10.1080/03772063.2023.2292276(SCIE, SCOPUS)
T. Nayak, N. Bhoi, "Robust fuzzy C-means clustering algorithm based on normal shrink and membership filtering for image segmentation", CLEI electronic journal, vol. 27, no.1, 2024
T. Nayak, N. Bhoi, "Self-sparse fuzzy clustering with automatic region merging approach for image segmentation", International Journal of Computers and Applications, vol. 46, no. 9, pp.728-742, 2024
Das, Aeoshri; Mohapatra, Subhangini; Mishro, Pranaba K; Agrawal, Sanjay; , Transfer Learning based Model for Prediction of Lung's Infection using X-ray Images, 2024 15th International Conference on Computing Communication and Networking Technologies (ICCCNT), Pages 1-5, IEEE
Mishro, Pranaba K; Agrawal, Sanjay; Panda, Rutuparna; Dora, Lingraj; Abraham, Ajith; , Intensity inhomogeneity correction in brain MRI: a systematic review of techniques, current trends and future challenges, Neural Computing and Applications, Pages 1-18, Springer
Chaudhary, Bhawesh K; Agrawal, Sanjay; Mishro, Pranaba K; Dora, Lingraj; Mahapatra, Sakambhari; Panda, Rutuparna; , A novel brightness preserving gradient based joint histogram equalization technique for mammogram image contrast enhancement, International Journal of Hybrid Intelligent Systems, Number Preprint, Pages 1-16, IOS Press
Sa, Bijay Kumar; Panda, Rutuparna; Agrawal, Sanjay; , Adaptive Spatially-Weighted Region-Based Active Contour, International Journal of Image and Graphics, Pages 2650020, World Scientific
Sa, Bijay Kumar; Panda, Rutuparna; Agrawal, Sanjay; , Relevant edge probability based adaptively weighted active contour for medical image segmentation, International Journal of Imaging Systems and Technology, Volume 34.0, Number 2, Pages e22993, Wiley Online Library
Mahapatra, Sakambhari; Agrawal, Sanjay; Mishro, Pranaba K; Panda, Rutuparna; Dora, Lingraj; Pachori, Ram Bilas; , A review on retinal blood vessel enhancement and segmentation techniques for color fundus photography, Critical Reviewsâ„¢ in Biomedical Engineering, Volume 52.0, Number 1, Begel House Inc.
Banerjee, B. , Pradhan, S. , Dhupal, D., Machining and Surface Characterization of Si3N4-Based Ceramic During Recently Developed USMM Using SiC Abrasives: An Experimental Investigation and Simulation Approach Arabian Journal for Science and Engineering, 49(11), pp. 15367–15395
Banerjee, B., Pradhan, S., Das, S., & Dhupal, D. Surface topography characterization of USMM during machining of zirconia ceramic using silicon carbide abrasives: An experimental and simulation approach. CIRP Journal of Manufacturing Science and Technology, 51, 1-19.
Parida, S. P., Mishra, D., Padhy, R. L., Jena, P. C., Das, S. R., Basem, A. A., ... & Elsheikh, A. Effect of Alkali Treatment on Mechanical and Buckling Behaviour of Natural Fiber Reinforced Composite Cylinder. ES Materials & Manufacturing, 24, 1161.
Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. Comparative performance investigation and sustainability evaluation between hot-AJM and AJM during machining of zirconia ceramic using Al2O3 abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46(5), 263.
Banerjee, B., Pradhan, S., & Dhupal, D. Machining and Surface Characterization of Si3N4-Based Ceramic During Recently Developed USMM Using SiC Abrasives: An Experimental Investigation and Simulation Approach. Arabian Journal for Science and Engineering, 1-29.
Dhupal, D., Panigrahi, D., Rout, S., Bhuyan, R. K., Nayak, S., Jena, P. C., & Das, S. R. (2024). Generation of effusion holes on ultra-high temperature alloy by micro electro-discharge machining process. Surface Review and Letters, 31(02), 2450015.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. Investigation on Surface Roughness and Power Consumption for Sustainability Assessment in Hard Turning of HSLA Steel With SPPP?AlTiSiN–Coated Carbide Tool Under Various Cooling?Lubrications. Lubrication Science.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. Analysis on power consumption for life cycle sustainability assessment in hard turning of AISI 4140 steel using SPPP ALTISIN-coated carbide tool under various cutting environments. Surface Review and Letters, 31(06), 1-26
Rout, S., Patel, S.K., Dhupal, D., Panigrahi, D. “Experimental investigation during pulsed fiber laser micro-engraving act on high-performance ceramic: Statistical study followed by surface morphology”, Optics and Laser Technology,168, 109887
Panda, S.; Pradhan, M; Panigrahi, S. K. (2024): Comparative study of OPC and PPC-based concrete properties containing bottom ash and fly ash as fine aggregate, The Indian Concrete Journal, Associated Cement Companies Limited, Vol. 98, no. 7, pp. 7-19, July 2024, https://www.icjonline.com/explore_journals/2024/07/
Parhi, S. K., Nanda, A; Panigrahi, S. K. (2024): Multi-Objective Optimization and Prediction of Strength along with Durability in Acid-Resistant Self-Compacting Alkali-Activated Concrete. Construction and Building Materials, Vol. 456, pp. 139235-1-21, Dec. 2024, https://doi.org/10.1016/j.conbuildmat.2024.139235
Dwibedy, S., Parhi, S. K., Panda, S., Panigrahi, S. K. (2024): Performance of precursor characteristics in the realization of geopolymer concrete: a review. Magazine of Concrete Research, Vol. 76, no. 24, pp. 1404-1423, July 2024, https://doi.org/10.1680/jmacr.24.00120
Panda, S. and Panigrahi, S. K. (2024): Production of sustainable GGBFS-based Self-Compacting Geopolymer Concrete containing E-Waste aggregates under ambient temperature curing, Construction and Building Materials, Vol. 440, p. 137373-1-17, July. 2024, https://doi.org/10.1016/j.conbuildmat.2024.137373
Panda, S.; Nanda, A; Panigrahi, S. K. (2024): Potential utilization of waste plastic in sustainable geopolymer concrete production: A review, Journal of Environmental Management, Elsevier, Vol. 366, 121705, pp. 1-19, July 2024, https://doi.org/10.1016/j.jenvman.2024.121705
Panda, S.; Pradhan, M; Panigrahi, S. K. (2024): Optimal Red Mud replacement level evaluation in Conventional Concrete based on Fresh and Harden Concrete Characteristics, Journal of Sustainable Metallurgy, Springer, (ESCI, IF-2.4), https://doi.org/10.1007/s40831-024-00837-y.
Parhi, S. K.: Dwibedy, S.; Panigrahi, S. K. (2024): AI-driven critical parameter optimization of sustainable self-compacting geopolymer concrete. Journal of Building Engineering, Elsevier (SCIE, IF-7.144), 86, 108923, https://doi.org/10.1016/j.jobe.2024.108923.
Parhi, S. K.; Panda, S.; Dwibedy, S.; Panigrahi, S. K. (2024): Metaheuristic optimization of machine learning models for strength prediction of high-performance self-compacting alkali-activated slag concrete. Multiscale and Multidisciplinary Modeling, Experiments and Design, Springer, (ESCI, IF-2.2), https://doi.org/10.1007/s41939-023-00349-4.
Pradhan, J.; Panda, S.; Mandal, R. K.; Panigrahi, S. K. (2024): Influence of GGBFS-based blended precursor on fresh properties of self-compacting geopolymer concrete under ambient temperature. Materials Today: Proceedings, Elsevier, (Scopus), 103, pp 1-10 https://doi.org/10.1016/j.matpr.2023.06.338.
Das, R.; Panda, S.; Sahoo, A. S.; Panigrahi, S. K. (2024): Effect of superplasticizer types and dosage on the flow characteristics of GGBFS based self-compacting geopolymer concrete. Materials Today: Proceedings, Elsevier, Elsevier, (Scopus), 103, pp 11-21 https://doi.org/10.1016/j.matpr.2023.06.339.
Bhoi, G., Sahu, R. K., Oram, E., & Jhanjhi, N. Z. (2024). Risk Assessment and Security of Industrial Internet of Things Network Using Advance Machine Learning. In Machine Learning for Cyber Physical System: Advances and Challenges (pp. 267-285). Cham: Springer Nature Switzerland.
Behera, P.; Jose, T. J.; Ramakrishna, D. S.; Praveen, P. L. Supramolecular Complex Catalyzed Green Synthesis of 9-(2-Ethylhexyl) Carbazole: Structural, Optical and DFT Investigations. Journal of Molecular Structure, 2024, 1308, 138089. https://doi.org/10.1016/j.molstruc.2024.138089. (SCI & SCOPUS)
Singh, S.; Kaushik, A.; Bendi, A.; Chetal, A.; Ramakrishna, D. S.; Praveen, P. L. Constructed Wetlands as Bioeconomic Solutions: Rhizofiltration with Macrophytes for Heavy Metal Removal. Emergent Materials, 2024. https://doi.org/10.1007/s42247-024-00675-4. (SCI & SCOPUS)
Suguna, S.; Subbareddy, Y.; Jose, T. J.; Chand, N. R.; Ramakrishna, D. S.; Praveen, P. L. Synthesis, Growth, and Optical Applications of N, N?-Bis (2-Aminophenyl) Ethane-1,2-Diammonium Picrate: An Organic Crystal. Journal of Molecular Structure, 2024, 1300, 137295. https://doi.org/10.1016/j.molstruc.2023.137295. (SCI & SCOPUS)
Das, P.; Jose, T. J.; Sharma, A. K.; Ramakrishna, D. S.; Praveen, P. L. Ultraviolet Response Data of Liquid Crystals for Bioprocess Monitoring: A Methodical Exploration. Journal of Molecular Structure, 2024, 1305, 137805. https://doi.org/10.1016/j.molstruc.2024.137805. (SCI & SCOPUS)
Veligeti, R.; Anireddy, J. S.; Madhu, R. B.; Bendi, A.; Praveen, P. L.; Jose, T. J.; Ramakrishna, D. S. Green Synthesis of Novel Acridone Fused Tetracyclic Analogues via Microwave-Promoted Fast, Solvent-Free Benzylation and Their DFT Studies. Journal of Molecular and Engineering Materials, 2024. https://doi.org/10.1142/s2251237324400082. (SCI & SCOPUS)
Udayasri, A.; Ramakrishna, D. S.; Behera, P.; Lakshmi Praveen, P.; Brahmeswararao, M. V. N. Synthesis of Ribociclib Using Phase Transfer Catalysis and Ecofriendly Reducing Agent: Potential Method for Industrial Practice. Journal of Molecular and Engineering Materials, 2024. https://doi.org/10.1142/s2251237324400112. (SCI & SCOPUS)
S S Sana, C J Raorane, R Venkatesan, S Roy, S. K. Swain, Seong-Cheol Kim, M Al-Tabakha, R R. Bhandare , V Raj, S Lee, “State-of-the-art progress on locust bean gum polysaccharide for sustainable food packaging and drug delivery applications: A review with prospectives” International Journal of Biological Macromolecules, (Elsevier), Available online 2 July 2024, 133619 (Impact Factor: 7.7), ISSN: 1879-0003. https://doi.org/10.1016/j.ijbiomac.2024.133619
S. Patra, D. Sahoo and S. K. Swain* Carbon quantum dots in N, N?-Dicyclohexylcarbodiimide assisted cellulose: A fluorescence sensitive approach for ex vivo glucose monitoring in human serum” International Journal of Biological Macromolecules, (Elsevier), 283(3), 137761 (2024). (Impact Factor: 7.7), ISSN: 1879-0003. https://doi.org/10.1016/j.ijbiomac.2024.137761.
K. M. Sahu, A. Biswal, U Manisha and S. K. Swain* “ Synthesis and drug release kinetics of ciprofloxacin from polyacrylamide/dextran/carbon quantum dots (PAM/Dex/CQD) hydrogels” . International Journal of Biological Macromolecules, (Elsevier), 269(2), 132132 (2024). (Impact Factor: 8.2) ISSN: 1879-0003. DOI: https://doi.org/10.1016/j.ijbiomac.2024.132132 (Early view)
Sk. Nazrul, A. Biswal, K M Sahu, S S Sana and S. K. Swain* " Nano Silver Imprinted Starch-co-Polymethylmethacrylate Sandwiched Layered Double Hydroxide Nanocomposite Films for Packaging Application" Starch Strake (Wiley), 00, 00-00 (2024). (Impact Factor: 2.741) ISSN: 1521-379X. DOI: 10.1002/star.202300106. (Early view)
P. K Behera, D. Sahu, B R Jali, A, K. Barick, S K Swain, P Mohapatra “A Simple Method for Synthesizing Nitrogen-Doped Carbon Quantum Dots for Fluorescent “Turn off” Mercury (II) Ion Sensing” Journal of Fluorescence (Springer); 00-00, 00 (2024) (Impact Factor: 2.7) ISSN: 1053-0509 Doi.org/10.1007/s10895-024-03649-1
J P Behera, S Patra, S K Najrul, S K surmma, D Kumar, M K Berma, A K Katare and S K Swain* “Nano Boron Nitride Laminated Poly(ethyl methacrylate)/Poly(vinyl alcohol) Composite Films Imprinted with Silver Nanoparticles as Gas Barrier and Bacteria Resistant Packaging Materials” Journal of Applied Polymer Science, 00, 00, (Wiley), (2024). (Impact Factor: 3) ISSN: 1097-4628. DOI: 10.1002/app.20232930.
S K Das, D Bharatiya, B Padhi. L Pradhan, B K Jena and S K Swain* “Effect of clay on Ti O 2 embedded PMMA nanocomposit e fo r high - performanc e energy storag e applicatio n” Journal of Energy Storage, 82, 110586 (Elsevier), (2024). (Impact Factor: 9.4) ISSN: 2352-1538. DOI: h t t p s : / / d o i . o r g / 1 0 . 1 0 1 6 /j . e s t . 2 0 2 4 . 1 1 0 5 8 6.
Sk. Nazrul, A. Biswal, L. Behera, and S. K. Swain*"Synthesis of sandwiched chitosan-g-PMMA nanocomposite by layered double hydroxides for packaging applications" Polymer Bulletin (Springer), 81(1), 633-660 (2024). (Impact Factor: 3.2) ISSN: 1436-2449. DOI: 101007/s00289-023-04732-6.
B. Patra, A Biswal, S. Swain, L. Behera and S. K Swain “Role of Nano SiC in Enhancement of Mechanical, Barrier and Flame-Retardant Properties of PANI-co-PAA Films” Polymer-Plastic Technology and Materials, xx, xx-xx (Tylor & Francis), (2024). (Impact Factor: 2.439) ISSN: 2574-089X DOI: https://doi.org/10.1080/25740881.2023.2297963 .
S. Behera, A.K. Barisal, S. Behera and D.K. Bagal, “Combined Economic Emission Dispatch including Variable Energy Resources,” Current World Environment. vol. 19, no. 2, p.841, 2024. (UGC CARE), DOI: http://dx.doi.org/10.12944/CWE.19.2.26 ISSN: 2320-8031
Bhawana Deshmukh, Deepak Kumar Lal, Sandeep Biswal, and Surender Reddy Salkuti “A differential amplitude variation based pilot relaying scheme for microgrid integrated distribution system”, International Journal of Emerging Electric Power Systems (DE GRUYTER Publications), 2024. https://doi.org/10.1515/ijeeps-2023-0444
Rampreet Manjhi, Deepak Kumar Lal, Sandeep Biswal, and Almoataz Y. Abdelaziz, "Technical Indices Evaluation of Radial Distribution Network with Optimally Allocated DGs and Capacitors using Golden Jackal Optimization Algorithm", ECTI Transactions on Electrical Engineering, Electronics, and Communications (ECTI-EEC) (ISSN: 1685-9545), Volume 22 (2), pp. 1-13, 2024. https://doi.org/10.37936/ecti-eec.2024222.250677
A hybrid islanding detection method using wavelet transform for hybrid systems with zero non-detection zone, M Mishra, BB Pati, World Journal of Engineering
A hybrid IDM using wavelet transform for a synchronous generator-based RES with zero non-detection zone, M Mishra, BB Pati, AIMS Electronics & Electrical Engineering 8 (1)
Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Chandrakanta Mishra, Investigation of Mechanical Attributes and Dynamic Mechanical Analysis of Hybrid Polyester Composites for Automotive Applications, Fibers and Polymers, Pages 1-19
Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Padmanav Dash, Effect of pistachio shell particles on mechanical and erosion wear performance of hybrid kenaf/glass polyester composites, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 13506501231224686
Lipsamayee Mishra, Trupti Ranjan Mahapatra, Debadutta Mishra, Punyapriya Mishra, Pratap Chandra Padhi, Study of Nd: YAG laser micro-drilling machinability and parametric optimization of graphite/Epoxy and carbon black/Epoxy nanocomposites, Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems, 23977914231217921
Dilip K. Sahu, Priyam P. Tripathy, Trupti R. Mahapatra, Punyapriya Mishra, Debadutta Mishra, Design optimization of structural component (hitch bracket of tractor): A reverse engineering approach, Structural Engineering and Mechanics, 89(5)
Binita Dash, Trupti R. Mahapatra, Punyapriya Mishra, Debadutta Mishra, Hygrothermal sound radiation analysis of layered composite plate using HFEM-IBEM micromechanical model and experimental validation, Structural Engineering and Mechanics, 89(3), 265-281
Itishree Rout, Trupti Ranjan Mahapatra, Punyapriya Mishra, Debadutta Mishra, Free Vibration and Acoustic Responses of Partially Biodegradable Hybrid Composites: Numerical Analysis and Experimental Validation, Journal of Vibration Engineering & Technologies, 1-20
Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Padmanav Dash, Influence of pistachio shell filler addition and interply hybridization on mechanical and thermal performances of polyester composites, Journal of Elastomers & Plastics, 56(2), 169-193
Chetana Tripathy, Deepak Kumar Mohapatra, Chitta Ranjan Deo, Padmanav Dash, Punyapriya Mishra, Experimental and numerical evaluation of mechanical performances of hybrid Palmyra-Palm-Leaf-Stalk/Glass fiber reinforced polyester composites, Journal of Elastomers & Plastics, 56(2), 141-168
Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Chandrakanta Mishra, Influence of Load and Sliding Velocity on Abrasive Wear of Polyester Composites Reinforced with Bio-Particulates as Filler Material, Transactions of Indian Institute of Metals, 1, 1-10
Ajit Kumar Behera, Punyapriya Mishra, Punyatoya Mishra, Chitta Ranjan Deo, Deepak Kumar Mohapatra, Debasish Rout, Effect of impact velocity and impingement angle on the Erosive wear behaviour of ceramic reinforced polymer composites, Transactions of Indian Institute of Metals, 77(2), 371-378
Swagatika Mishra, Punyapriya Mishra, Punyatoya Mishra, Deepak Kumar Mohapatra, Dinesh Kumar Mishra, Krushna Prasad Shadangi, Study of frequency dependence properties of CCTO-BT/epoxy composites, Part C: Journal of Mechanical Engineering Science, 238 (6), 2140-2149
Chetana Tripathy, Deepak Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Erosive wear study of PPLSF/Glass fiber reinforced hybrid laminates, Journal of Harbin Institute of Technology (New Series)
Chandrakanta Mishra, Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Kiran Kumar Ekka, Erosion wear behaviour of kenaf/glass hybrid polymer composites. Journal of Harbin Institute of Technology (New Series), 31 (1), 78-89
Swagatika Mishra, Punyapriya Mishra, Punyatoya Mishra, Dinesh Kumar Mishra, Krushna Prasad Shadangi, Deepak Kumar Mohapatra, Evaluation of dielectric properties of CCTO-BT/epoxy composites for electronic applications. Journal of Harbin Institute of Technology (New Series), 31(1), 69-77
M. Mishra, B.B. Pati(2024), A hybridIDMusing wavelet transformfor asynchronous generator-based RES with zero non-detection zone, AIMS Electronics and Electrical Engineering, 8(1): 146-164.doi:10.3934/electreng.2024006
Shaswat Chirantan, and B.B. Pati(2024) "Torque and dq axis current dynamics of an inverter fed induction motor drive that leverages computational intelligent techniques." AIMS Electronics and Electrical Engineering 8, no. 1, pp.28-52.
Shaswat Chirantan, and B.B. Pati(2024)"Integration of predictive andcomputational intelligent techniques: A hybrid optimization mechanism forPMSM dynamics reinforcement." AIMS Electronics and Electrical Engineering 8,no.2 :pp.255-281.
Biresh Kumar Dakua, B. B. Pati,(2024) “A deterministic design approach of tilt integral derivative controller for integer and fractional-order system with time delay”, Engineering Research Express, IOP Publishing, vol. 6, 035331, 2024, DOI: 10.1088/26318695/ad6ca5.
Biresh Kumar Dakua, B. B. Pati,(2024) “A frequency domain-based loop shaping procedure for the parameter estimation of the fractional-order tilt integral derivative controller”, Mathematical Modelling and Control, AIMS Press, vol. 4, issue. 4, pp. 374-389, 2024, DOI: 10.3934/mmc.2024031.
R. Pramanik, J. K. Pradhan, and B. B. Pati,(2024) “A Novel PWM Inverter Topology for Intuitive Motion Controls of EV With BLDC Motor,” The International Journal of Integrated Engineering, Vol. 16, No.5, pp.250-264.
Biresh Kumar Dakua, B. B. Pati,(2024) “Controllers for Suppression of Limit Cycle in a Plant with Time Delay and Backlash Nonlinearity”, International Journal of Automotive Science and Technology, DergiParkAkademik,vol.8,no. 4, pp. 506-526, DOI:10.29228/ijastech.1471847.
Shaswat Chirantan, and B.B. Pati(2024)"Dynamics assessment of an inverter fed induction motor drive by an improved predictive controller leveraging finite control set mechanism." ITEGAM-JETIA 10, no. 47 (2024): pp. 83-94.
S. P. Sahoo, B. Das, B. B. Pati,(2024) “A Convolutional Neural Network MachineLearning based Navigation of Underwater Vehicles under Limited Communication” Archives of Control Sciences, vol. 34 (LXX), no. 3, pp. 537-568, Oct. 2024. https://doi.org/10.24425/acs.2024.149671.
Ranjan Pramanik, J. K. Pradhan, and B. B. Pati,(2024) “A Novel PWM Inverter Topology for Intuitive Motion Controls of EV With BLDC Motor,” The International Journal of Integrated Engineering, Vol. 16, No. 5, 2024, PP. 250-264,Doi:https://doi.org/10.30880/ijie.2024.16.05.019
M. Mishra, L. Panigrahi and J. Panda, “Investigation of induced magnetic field on MHD radiative flow across an exponentially stretching sheet”, International Journal of Ambient Energy, pp.1-21, 2023, doi:10.1080/01430750.2023.2169757, Available: https://doi.org/10.1080/01430750.2023.2169757
Arjun Agrawal and J.P. Panda, “Impact of radiation on MHD flow with hall effect and induced magnetic field over magnetized vertical surface”, Songklanakarin Journal of Science and Technology, vol. 45, no. 4, pp.483-493, Jul- Aug. 2023
Somani, N., Walia, A. S., Gupta, N. K., Panda, J. P., Das, A., & Das, S. R. (2023). Data-driven surrogate model-based optimization of EDM process parameters of D2 steel using Cu–SiC composite tool. Revista de Metalurgia, 59(2), e242.
Kumar, N., Kumar, A., Sethy, S., & Das, S. R. (2023). Investigation and optimization in electrochemical arc drilling of NiTi shape memory alloy with molybdenum electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45.
Pittala, R. K., Sharma, P., Anne, G., Patil, S., Varghese, V., Das, S. R., et al. (2023). Development and mechanical characterization of Ni–Cr alloy foam using ultrasonic-assisted electroplating coating technique. Coatings, 13(6), 1002.
Mishra, P. C., Roychoudhury, A., Banerjee, A., Saha, N., Das, S. R., & Das, A. (2023). Coated piston ring pack and cylinder liner elastodynamics using FEA modelling. Lubricants, 11(5), 192.
Sharma, P., Soni, H., Sethy, S., Das, S. R., et al. (2023). Surface characterization of SAE 304 after WED cutting: Experimental investigation and optimization. Journal of Materials Research and Technology, 23, 5723–5732.
Mahapatra, S., Das, A., Jena, P. C., & Das, S. R. (2023). Turning of hardened AISI H13 steel using nanofluid-based MQL. Proceedings of the Institution of Mechanical Engineers, Part C.
Padhan, S., Wagri, N. K., Dash, L., Das, A., Das, S. R., et al. (2023). Surface integrity in hard turning of AISI 4140 steel with nanofluid MQL. Lubricants, 11(2), 49.
Somani, N., Walia, A. S., Gupta, N. K., Panda, J. P., Das, A., & Das, S. R. (2023). Data-driven surrogate model-based optimization of EDM process parameters of D2 steel using Cu–SiC composite tool. Revista de Metalurgia, 59(2), e242.
Kumar, N., Kumar, A., Sethy, S., & Das, S. R. (2023). Investigation and optimization in electrochemical arc drilling of NiTi shape memory alloy with molybdenum electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45.
Pittala, R. K., Sharma, P., Anne, G., Patil, S., Varghese, V., Das, S. R., et al. (2023). Development and mechanical characterization of Ni–Cr alloy foam using ultrasonic-assisted electroplating coating technique. Coatings, 13(6), 1002.
Mishra, P. C., Roychoudhury, A., Banerjee, A., Saha, N., Das, S. R., & Das, A. (2023). Coated piston ring pack and cylinder liner elastodynamics using FEA modelling. Lubricants, 11(5), 192.
Sharma, P., Soni, H., Sethy, S., Das, S. R., et al. (2023). Surface characterization of SAE 304 after WED cutting: Experimental investigation and optimization. Journal of Materials Research and Technology, 23, 5723–5732.
Mahapatra, S., Das, A., Jena, P. C., & Das, S. R. (2023). Turning of hardened AISI H13 steel using nanofluid-based MQL. Proceedings of the Institution of Mechanical Engineers, Part C.
Padhan, S., Wagri, N. K., Dash, L., Das, A., Das, S. R., et al. (2023). Surface integrity in hard turning of AISI 4140 steel with nanofluid MQL. Lubricants, 11(2), 49.
Somani, N., Walia, A. S., Gupta, N. K., Panda, J. P., Das, A., & Das, S. R. (2023). Data-driven surrogate model-based optimization of EDM process parameters of D2 steel using Cu–SiC composite tool. Revista de Metalurgia, 59(2), e242.
Kumar, N., Kumar, A., Sethy, S., & Das, S. R. (2023). Investigation and optimization in electrochemical arc drilling of NiTi shape memory alloy with molybdenum electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45.
Pittala, R. K., Sharma, P., Anne, G., Patil, S., Varghese, V., Das, S. R., et al. (2023). Development and mechanical characterization of Ni–Cr alloy foam using ultrasonic-assisted electroplating coating technique. Coatings, 13(6), 1002.
Mishra, P. C., Roychoudhury, A., Banerjee, A., Saha, N., Das, S. R., & Das, A. (2023). Coated piston ring pack and cylinder liner elastodynamics using FEA modelling. Lubricants, 11(5), 192.
Sharma, P., Soni, H., Sethy, S., Das, S. R., et al. (2023). Surface characterization of SAE 304 after WED cutting: Experimental investigation and optimization. Journal of Materials Research and Technology, 23, 5723–5732.
Mahapatra, S., Das, A., Jena, P. C., & Das, S. R. (2023). Turning of hardened AISI H13 steel using nanofluid-based MQL. Proceedings of the Institution of Mechanical Engineers, Part C.
Padhan, S., Wagri, N. K., Dash, L., Das, A., Das, S. R., et al. (2023). Surface integrity in hard turning of AISI 4140 steel with nanofluid MQL. Lubricants, 11(2), 49.
Somani, N., Walia, A. S., Gupta, N. K., Panda, J. P., Das, A., & Das, S. R. (2023). Data-driven surrogate model-based optimization of EDM process parameters of D2 steel using Cu–SiC composite tool. Revista de Metalurgia, 59(2), e242.
Kumar, N., Kumar, A., Sethy, S., & Das, S. R. (2023). Investigation and optimization in electrochemical arc drilling of NiTi shape memory alloy with molybdenum electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45.
Pittala, R. K., Sharma, P., Anne, G., Patil, S., Varghese, V., Das, S. R., et al. (2023). Development and mechanical characterization of Ni–Cr alloy foam using ultrasonic-assisted electroplating coating technique. Coatings, 13(6), 1002.
Mishra, P. C., Roychoudhury, A., Banerjee, A., Saha, N., Das, S. R., & Das, A. (2023). Coated piston ring pack and cylinder liner elastodynamics using FEA modelling. Lubricants, 11(5), 192.
Sharma, P., Soni, H., Sethy, S., Das, S. R., et al. (2023). Surface characterization of SAE 304 after WED cutting: Experimental investigation and optimization. Journal of Materials Research and Technology, 23, 5723–5732.
Mahapatra, S., Das, A., Jena, P. C., & Das, S. R. (2023). Turning of hardened AISI H13 steel using nanofluid-based MQL. Proceedings of the Institution of Mechanical Engineers, Part C.
Padhan, S., Wagri, N. K., Dash, L., Das, A., Das, S. R., et al. (2023). Surface integrity in hard turning of AISI 4140 steel with nanofluid MQL. Lubricants, 11(2), 49.
Somani, N., Walia, A. S., Gupta, N. K., Panda, J. P., Das, A., & Das, S. R. (2023). Data-driven surrogate model-based optimization of EDM process parameters of D2 steel using Cu–SiC composite tool. Revista de Metalurgia, 59(2), e242.
Kumar, N., Kumar, A., Sethy, S., & Das, S. R. (2023). Investigation and optimization in electrochemical arc drilling of NiTi shape memory alloy with molybdenum electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45.
Pittala, R. K., Sharma, P., Anne, G., Patil, S., Varghese, V., Das, S. R., et al. (2023). Development and mechanical characterization of Ni–Cr alloy foam using ultrasonic-assisted electroplating coating technique. Coatings, 13(6), 1002.
Mishra, P. C., Roychoudhury, A., Banerjee, A., Saha, N., Das, S. R., & Das, A. (2023). Coated piston ring pack and cylinder liner elastodynamics using FEA modelling. Lubricants, 11(5), 192.
Sharma, P., Soni, H., Sethy, S., Das, S. R., et al. (2023). Surface characterization of SAE 304 after WED cutting: Experimental investigation and optimization. Journal of Materials Research and Technology, 23, 5723–5732.
Mahapatra, S., Das, A., Jena, P. C., & Das, S. R. (2023). Turning of hardened AISI H13 steel using nanofluid-based MQL. Proceedings of the Institution of Mechanical Engineers, Part C.
Padhan, S., Wagri, N. K., Dash, L., Das, A., Das, S. R., et al. (2023). Surface integrity in hard turning of AISI 4140 steel with nanofluid MQL. Lubricants, 11(2), 49.
Somani, N., Walia, A. S., Gupta, N. K., Panda, J. P., Das, A., & Das, S. R. (2023). Data-driven surrogate model-based optimization of EDM process parameters of D2 steel using Cu–SiC composite tool. Revista de Metalurgia, 59(2), e242.
Kumar, N., Kumar, A., Sethy, S., & Das, S. R. (2023). Investigation and optimization in electrochemical arc drilling of NiTi shape memory alloy with molybdenum electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45.
Pittala, R. K., Sharma, P., Anne, G., Patil, S., Varghese, V., Das, S. R., et al. (2023). Development and mechanical characterization of Ni–Cr alloy foam using ultrasonic-assisted electroplating coating technique. Coatings, 13(6), 1002.
Mishra, P. C., Roychoudhury, A., Banerjee, A., Saha, N., Das, S. R., & Das, A. (2023). Coated piston ring pack and cylinder liner elastodynamics using FEA modelling. Lubricants, 11(5), 192.
Sharma, P., Soni, H., Sethy, S., Das, S. R., et al. (2023). Surface characterization of SAE 304 after WED cutting: Experimental investigation and optimization. Journal of Materials Research and Technology, 23, 5723–5732.
Mahapatra, S., Das, A., Jena, P. C., & Das, S. R. (2023). Turning of hardened AISI H13 steel using nanofluid-based MQL. Proceedings of the Institution of Mechanical Engineers, Part C.
Padhan, S., Wagri, N. K., Dash, L., Das, A., Das, S. R., et al. (2023). Surface integrity in hard turning of AISI 4140 steel with nanofluid MQL. Lubricants, 11(2), 49.
Somani, N., Walia, A. S., Gupta, N. K., Panda, J. P., Das, A., & Das, S. R. (2023). Data-driven surrogate model-based optimization of EDM process parameters of D2 steel using Cu–SiC composite tool. Revista de Metalurgia, 59(2), e242.
Kumar, N., Kumar, A., Sethy, S., & Das, S. R. (2023). Investigation and optimization in electrochemical arc drilling of NiTi shape memory alloy with molybdenum electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45.
Pittala, R. K., Sharma, P., Anne, G., Patil, S., Varghese, V., Das, S. R., et al. (2023). Development and mechanical characterization of Ni–Cr alloy foam using ultrasonic-assisted electroplating coating technique. Coatings, 13(6), 1002.
Mishra, P. C., Roychoudhury, A., Banerjee, A., Saha, N., Das, S. R., & Das, A. (2023). Coated piston ring pack and cylinder liner elastodynamics using FEA modelling. Lubricants, 11(5), 192.
Sharma, P., Soni, H., Sethy, S., Das, S. R., et al. (2023). Surface characterization of SAE 304 after WED cutting: Experimental investigation and optimization. Journal of Materials Research and Technology, 23, 5723–5732.
Mahapatra, S., Das, A., Jena, P. C., & Das, S. R. (2023). Turning of hardened AISI H13 steel using nanofluid-based MQL. Proceedings of the Institution of Mechanical Engineers, Part C.
Padhan, S., Wagri, N. K., Dash, L., Das, A., Das, S. R., et al. (2023). Surface integrity in hard turning of AISI 4140 steel with nanofluid MQL. Lubricants, 11(2), 49.
Somani, N., Walia, A. S., Gupta, N. K., Panda, J. P., Das, A., & Das, S. R. (2023). Data-driven surrogate model-based optimization of EDM process parameters of D2 steel using Cu–SiC composite tool. Revista de Metalurgia, 59(2), e242.
Kumar, N., Kumar, A., Sethy, S., & Das, S. R. (2023). Investigation and optimization in electrochemical arc drilling of NiTi shape memory alloy with molybdenum electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45.
Pittala, R. K., Sharma, P., Anne, G., Patil, S., Varghese, V., Das, S. R., et al. (2023). Development and mechanical characterization of Ni–Cr alloy foam using ultrasonic-assisted electroplating coating technique. Coatings, 13(6), 1002.
Mishra, P. C., Roychoudhury, A., Banerjee, A., Saha, N., Das, S. R., & Das, A. (2023). Coated piston ring pack and cylinder liner elastodynamics using FEA modelling. Lubricants, 11(5), 192.
Sharma, P., Soni, H., Sethy, S., Das, S. R., et al. (2023). Surface characterization of SAE 304 after WED cutting: Experimental investigation and optimization. Journal of Materials Research and Technology, 23, 5723–5732.
Mahapatra, S., Das, A., Jena, P. C., & Das, S. R. (2023). Turning of hardened AISI H13 steel using nanofluid-based MQL. Proceedings of the Institution of Mechanical Engineers, Part C.
Padhan, S., Wagri, N. K., Dash, L., Das, A., Das, S. R., et al. (2023). Surface integrity in hard turning of AISI 4140 steel with nanofluid MQL. Lubricants, 11(2), 49.
Somani, N., Walia, A. S., Gupta, N. K., Panda, J. P., Das, A., & Das, S. R. (2023). Data-driven surrogate model-based optimization of EDM process parameters of D2 steel using Cu–SiC composite tool. Revista de Metalurgia, 59(2), e242.
Kumar, N., Kumar, A., Sethy, S., & Das, S. R. (2023). Investigation and optimization in electrochemical arc drilling of NiTi shape memory alloy with molybdenum electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45.
Pittala, R. K., Sharma, P., Anne, G., Patil, S., Varghese, V., Das, S. R., et al. (2023). Development and mechanical characterization of Ni–Cr alloy foam using ultrasonic-assisted electroplating coating technique. Coatings, 13(6), 1002.
Mishra, P. C., Roychoudhury, A., Banerjee, A., Saha, N., Das, S. R., & Das, A. (2023). Coated piston ring pack and cylinder liner elastodynamics using FEA modelling. Lubricants, 11(5), 192.
Sharma, P., Soni, H., Sethy, S., Das, S. R., et al. (2023). Surface characterization of SAE 304 after WED cutting: Experimental investigation and optimization. Journal of Materials Research and Technology, 23, 5723–5732.
Mahapatra, S., Das, A., Jena, P. C., & Das, S. R. (2023). Turning of hardened AISI H13 steel using nanofluid-based MQL. Proceedings of the Institution of Mechanical Engineers, Part C.
Padhan, S., Wagri, N. K., Dash, L., Das, A., Das, S. R., et al. (2023). Surface integrity in hard turning of AISI 4140 steel with nanofluid MQL. Lubricants, 11(2), 49.
Somani, N., Walia, A. S., Gupta, N. K., Panda, J. P., Das, A., & Das, S. R. (2023). Data-driven surrogate model-based optimization of EDM process parameters of D2 steel using Cu–SiC composite tool. Revista de Metalurgia, 59(2), e242.
Kumar, N., Kumar, A., Sethy, S., & Das, S. R. (2023). Investigation and optimization in electrochemical arc drilling of NiTi shape memory alloy with molybdenum electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45.
Pittala, R. K., Sharma, P., Anne, G., Patil, S., Varghese, V., Das, S. R., et al. (2023). Development and mechanical characterization of Ni–Cr alloy foam using ultrasonic-assisted electroplating coating technique. Coatings, 13(6), 1002.
Mishra, P. C., Roychoudhury, A., Banerjee, A., Saha, N., Das, S. R., & Das, A. (2023). Coated piston ring pack and cylinder liner elastodynamics using FEA modelling. Lubricants, 11(5), 192.
Sharma, P., Soni, H., Sethy, S., Das, S. R., et al. (2023). Surface characterization of SAE 304 after WED cutting: Experimental investigation and optimization. Journal of Materials Research and Technology, 23, 5723–5732.
Mahapatra, S., Das, A., Jena, P. C., & Das, S. R. (2023). Turning of hardened AISI H13 steel using nanofluid-based MQL. Proceedings of the Institution of Mechanical Engineers, Part C.
Padhan, S., Wagri, N. K., Dash, L., Das, A., Das, S. R., et al. (2023). Surface integrity in hard turning of AISI 4140 steel with nanofluid MQL. Lubricants, 11(2), 49.
Somani, N., Walia, A. S., Gupta, N. K., Panda, J. P., Das, A., & Das, S. R. (2023). Data-driven surrogate model-based optimization of EDM process parameters of D2 steel using Cu–SiC composite tool. Revista de Metalurgia, 59(2), e242.
Kumar, N., Kumar, A., Sethy, S., & Das, S. R. (2023). Investigation and optimization in electrochemical arc drilling of NiTi shape memory alloy with molybdenum electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45.
Pittala, R. K., Sharma, P., Anne, G., Patil, S., Varghese, V., Das, S. R., et al. (2023). Development and mechanical characterization of Ni–Cr alloy foam using ultrasonic-assisted electroplating coating technique. Coatings, 13(6), 1002.
Mishra, P. C., Roychoudhury, A., Banerjee, A., Saha, N., Das, S. R., & Das, A. (2023). Coated piston ring pack and cylinder liner elastodynamics using FEA modelling. Lubricants, 11(5), 192.
Sharma, P., Soni, H., Sethy, S., Das, S. R., et al. (2023). Surface characterization of SAE 304 after WED cutting: Experimental investigation and optimization. Journal of Materials Research and Technology, 23, 5723–5732.
Mahapatra, S., Das, A., Jena, P. C., & Das, S. R. (2023). Turning of hardened AISI H13 steel using nanofluid-based MQL. Proceedings of the Institution of Mechanical Engineers, Part C.
Padhan, S., Wagri, N. K., Dash, L., Das, A., Das, S. R., et al. (2023). Surface integrity in hard turning of AISI 4140 steel with nanofluid MQL. Lubricants, 11(2), 49.
Somani, N., Walia, A. S., Gupta, N. K., Panda, J. P., Das, A., & Das, S. R. (2023). Data-driven surrogate model-based optimization of EDM process parameters of D2 steel using Cu–SiC composite tool. Revista de Metalurgia, 59(2), e242.
Kumar, N., Kumar, A., Sethy, S., & Das, S. R. (2023). Investigation and optimization in electrochemical arc drilling of NiTi shape memory alloy with molybdenum electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45.
Pittala, R. K., Sharma, P., Anne, G., Patil, S., Varghese, V., Das, S. R., et al. (2023). Development and mechanical characterization of Ni–Cr alloy foam using ultrasonic-assisted electroplating coating technique. Coatings, 13(6), 1002.
Mishra, P. C., Roychoudhury, A., Banerjee, A., Saha, N., Das, S. R., & Das, A. (2023). Coated piston ring pack and cylinder liner elastodynamics using FEA modelling. Lubricants, 11(5), 192.
Sharma, P., Soni, H., Sethy, S., Das, S. R., et al. (2023). Surface characterization of SAE 304 after WED cutting: Experimental investigation and optimization. Journal of Materials Research and Technology, 23, 5723–5732.
Mahapatra, S., Das, A., Jena, P. C., & Das, S. R. (2023). Turning of hardened AISI H13 steel using nanofluid-based MQL. Proceedings of the Institution of Mechanical Engineers, Part C.
Padhan, S., Wagri, N. K., Dash, L., Das, A., Das, S. R., et al. (2023). Surface integrity in hard turning of AISI 4140 steel with nanofluid MQL. Lubricants, 11(2), 49.
Swagatika Mishra, Punyapriya Mishra, Punyatoya Mishra, Deepak Kumar Mohapatra, Dinesh Kumar Mishra, Krushna Prasad Shadangi, Study of Mechanical and Morphological properties of CCTO-BT/epoxy composite, Composite Theory and Practices, 23(3), 123-128
Sabindra Kachhap, Pabitra Kumar Sahu, Punyapriya Mishra, Investigation and optimization of wire EDM process parameters for Al 5454 alloy machining, Materials today proceeding
Somani, N., Walia, A. S., Gupta, N. K., Panda, J. P., Das, A., & Das, S. R. (2023). Data-driven surrogate model-based optimization of EDM process parameters of D2 steel using Cu–SiC composite tool. Revista de Metalurgia, 59(2), e242.
Kumar, N., Kumar, A., Sethy, S., & Das, S. R. (2023). Investigation and optimization in electrochemical arc drilling of NiTi shape memory alloy with molybdenum electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45.
Pittala, R. K., Sharma, P., Anne, G., Patil, S., Varghese, V., Das, S. R., et al. (2023). Development and mechanical characterization of Ni–Cr alloy foam using ultrasonic-assisted electroplating coating technique. Coatings, 13(6), 1002.
Mishra, P. C., Roychoudhury, A., Banerjee, A., Saha, N., Das, S. R., & Das, A. (2023). Coated piston ring pack and cylinder liner elastodynamics using FEA modelling. Lubricants, 11(5), 192.
Sharma, P., Soni, H., Sethy, S., Das, S. R., et al. (2023). Surface characterization of SAE 304 after WED cutting: Experimental investigation and optimization. Journal of Materials Research and Technology, 23, 5723–5732.
Mahapatra, S., Das, A., Jena, P. C., & Das, S. R. (2023). Turning of hardened AISI H13 steel using nanofluid-based MQL. Proceedings of the Institution of Mechanical Engineers, Part C.
Padhan, S., Wagri, N. K., Dash, L., Das, A., Das, S. R., et al. (2023). Surface integrity in hard turning of AISI 4140 steel with nanofluid MQL. Lubricants, 11(2), 49.
Somani, N., Walia, A. S., Gupta, N. K., Panda, J. P., Das, A., & Das, S. R. (2023). Data-driven surrogate model-based optimization of EDM process parameters of D2 steel using Cu–SiC composite tool. Revista de Metalurgia, 59(2), e242.
Kumar, N., Kumar, A., Sethy, S., & Das, S. R. (2023). Investigation and optimization in electrochemical arc drilling of NiTi shape memory alloy with molybdenum electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45.
Pittala, R. K., Sharma, P., Anne, G., Patil, S., Varghese, V., Das, S. R., et al. (2023). Development and mechanical characterization of Ni–Cr alloy foam using ultrasonic-assisted electroplating coating technique. Coatings, 13(6), 1002.
Mishra, P. C., Roychoudhury, A., Banerjee, A., Saha, N., Das, S. R., & Das, A. (2023). Coated piston ring pack and cylinder liner elastodynamics using FEA modelling. Lubricants, 11(5), 192.
Sharma, P., Soni, H., Sethy, S., Das, S. R., et al. (2023). Surface characterization of SAE 304 after WED cutting: Experimental investigation and optimization. Journal of Materials Research and Technology, 23, 5723–5732.
Mahapatra, S., Das, A., Jena, P. C., & Das, S. R. (2023). Turning of hardened AISI H13 steel using nanofluid-based MQL. Proceedings of the Institution of Mechanical Engineers, Part C.
Padhan, S., Wagri, N. K., Dash, L., Das, A., Das, S. R., et al. (2023). Surface integrity in hard turning of AISI 4140 steel with nanofluid MQL. Lubricants, 11(2), 49.
34. Somani, N., Walia, A. S., Gupta, N. K., Panda, J. P., Das, A., & Das, S. R. (2023). Data-driven surrogate model-based optimization of EDM process parameters of D2 steel using Cu–SiC composite tool. Revista de Metalurgia, 59(2), e242.
35. Kumar, N., Kumar, A., Sethy, S., & Das, S. R. (2023). Investigation and optimization in electrochemical arc drilling of NiTi shape memory alloy with molybdenum electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45.
36. Pittala, R. K., Sharma, P., Anne, G., Patil, S., Varghese, V., Das, S. R., et al. (2023). Development and mechanical characterization of Ni–Cr alloy foam using ultrasonic-assisted electroplating coating technique. Coatings, 13(6), 1002.
37. Mishra, P. C., Roychoudhury, A., Banerjee, A., Saha, N., Das, S. R., & Das, A. (2023). Coated piston ring pack and cylinder liner elastodynamics using FEA modelling. Lubricants, 11(5), 192.
38. Sharma, P., Soni, H., Sethy, S., Das, S. R., et al. (2023). Surface characterization of SAE 304 after WED cutting: Experimental investigation and optimization. Journal of Materials Research and Technology, 23, 5723–5732.
39. Mahapatra, S., Das, A., Jena, P. C., & Das, S. R. (2023). Turning of hardened AISI H13 steel using nanofluid-based MQL. Proceedings of the Institution of Mechanical Engineers, Part C.
40. Padhan, S., Wagri, N. K., Dash, L., Das, A., Das, S. R., et al. (2023). Surface integrity in hard turning of AISI 4140 steel with nanofluid MQL. Lubricants, 11(2), 49.
34. Somani, N., Walia, A. S., Gupta, N. K., Panda, J. P., Das, A., & Das, S. R. (2023). Data-driven surrogate model-based optimization of EDM process parameters of D2 steel using Cu–SiC composite tool. Revista de Metalurgia, 59(2), e242.
35. Kumar, N., Kumar, A., Sethy, S., & Das, S. R. (2023). Investigation and optimization in electrochemical arc drilling of NiTi shape memory alloy with molybdenum electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45.
36. Pittala, R. K., Sharma, P., Anne, G., Patil, S., Varghese, V., Das, S. R., et al. (2023). Development and mechanical characterization of Ni–Cr alloy foam using ultrasonic-assisted electroplating coating technique. Coatings, 13(6), 1002.
37. Mishra, P. C., Roychoudhury, A., Banerjee, A., Saha, N., Das, S. R., & Das, A. (2023). Coated piston ring pack and cylinder liner elastodynamics using FEA modelling. Lubricants, 11(5), 192.
38. Sharma, P., Soni, H., Sethy, S., Das, S. R., et al. (2023). Surface characterization of SAE 304 after WED cutting: Experimental investigation and optimization. Journal of Materials Research and Technology, 23, 5723–5732.
39. Mahapatra, S., Das, A., Jena, P. C., & Das, S. R. (2023). Turning of hardened AISI H13 steel using nanofluid-based MQL. Proceedings of the Institution of Mechanical Engineers, Part C.
40. Padhan, S., Wagri, N. K., Dash, L., Das, A., Das, S. R., et al. (2023). Surface integrity in hard turning of AISI 4140 steel with nanofluid MQL. Lubricants, 11(2), 49.
A. Biswal, S. Purohit, J. Pratapsingh, L. Mishra, M. Monalisa, S. B. Biswal, S. K Swain*,"Synergistic Effect of f-MWCNT and Nano Titania on Wound Healing Efficacy of Chitosan Films in Drosophila and Rat Models" ACS Applied Nano Material s(ACS), 6, 24, 23064–23077 (2023) (Impact Factor: 5.6) ISSN: 2574-0970 DOI: https://doi.org/10.1021/acsanm.3c04413
S. Purohit, A. Biswal, L. Mishra, M. Monalisa, S. B. Biswal, S. K Swain* "In vivo Wound Healing in Drosophila Melanogaster and Mouse models: Synergistic Effect of Bovine Serum Albumin and Graphene Quantum Dots" ACS Appl. Bio Mater.(ACS) 6, 12, 5531–5540 (2023) (Impact Factor: 4.7) ISSN: 2576-6422. DOI: https://doi.org/10.1021/acsabm.3c00743
S. K Das, D. Bharatia, B. Parhi, and S K Swain* “Influential factors modulating the dielectric behaviour of transition metal oxide nanocomposites for energy storage applications: A-state-of-the-art review” Journal of Energy Storage, 73, 108930 (Elsevier), (2023). (Impact Factor: 9.8) ISSN: 2352-1538. DOI: https://doi.org/10.1016/j.est.2023.108930
S. Patra, K. M Sahu, J. Mahanty, and S. K. Swain* “Ex Vivo Glucose Detection in Human Blood Serums with Carbon Quantum Dot-Doped Oleic Acid-Treated Chitosan Nanocomposites” ACS Appl. Bio Mater.(ACS) 6(12), 5730-5745 (2023) (Impact Factor: 4.7) ISSN: 2576-6422 https://doi.org/10.1021/acsabm.3c00851
S. Patra, S. Mishra, B. Parhi, H. Mishra, S. K. Swain* “Role of transition metal nanocomposites in organic reactions: A state of art as an alternative to conventional catalysts” Results in Chemistry (Elsevier), 6 (2023) 101172. (Impact Factor: 4.2) ISSN: 2211-7156. DOI: https://doi.org/10.1016/j.rechem.2023.101172
S. K. Swain*, Sk. Nazrul, S. K Das, A. Biswal and L. Behera, “Layered Double Hydroxides bundled Agar-g-PAN/Ag Nanocomposite Films: A Strategy to Improve Thermal, Barrier and Antibacterial Properties” Materials Today Communication, (Elsevier), 37, 107073 (2023). (Impact Factor: 4.5) ISSN: 2352-4928. DOI: https://doi.org/10.1016/j.mtcomm.2023.107073
A Biswal, S S Purohit and S. K. Swain* “Chitosan based composite scaffolds in skin wound repair: A review” Journal of Drug Delivery Science and Technology, (Elsevier)84, 104549(2023) (Impact Factor: 5.37) ISSN: 1773-2247. DOI: https://doi.org/10.1016/j.jddst.2023.104549
K. M. Sahu, S. Patra and S. K. Swain* “Host-Guest Drug Delivery by β-cyclodextrin Assisted Polysaccharide Vehicles: A Review. International Journal of Biological Macromolecules, (Elsevier), 240 124338(1-20) (2023). (Impact Factor: 8.5) ISSN: 1879-0003. DOI: https://doi.org/10.1016/j.ijbiomac.2023.124338
D. Bharatia, B. Parhi, and S K Swain*"Dielectric Study of Nanostructured Ternary Composite Derived from Amalgamated CuO/Ag2O on Graphene Oxide Sheets. Journal of Materials Research (Springer), 00, 00-00 (2023). (Impact Factor: 3.02) ISSN: 2044-5326. DOI: https://doi.org/ 10.1557/s43578-023-01068-9
S. Patra, S. S. Purohit and S. K. Swain* In vivo fluorescence non-enzymatic glucose sensing technique for diabetes management by CQDs incorporated dextran nanocomposites in human blood serums. Microchemical Journal, 109,108646 (1-10) (Elsevier), (2023). (Impact Factor: 5.1) ISSN: 0026-265X. DOI: https://doi.org/10.1016/j.microc.2023.108646
D. Bharatia, B. Parhi, H. Sahuand S K Swain*Factors influencing the dielectric properties of GO/MO nanocomposites: review, Journal of Materials Science: Materials in Electronics, 34(5), 452, (Springer), (2023). (Impact Factor: 2.8) ISSN: 0957-4522. DOI: https://doi.org/10.1007/s10854-023-09928-0
D. Bharatiya, S. Patra, B. Parhi and S K Swain* “A materials science approach towards bioinspired polymeric nanocomposites: a comprehensive review” International Journal of Polymeric Materials and Polymeric Biomaterials, 72(2), 119-134, (Tylor & Francis), (2023). (Impact Factor: 3.8) ISSN: 0091-4037. DOI: https://doi.org/10.1080/00914037.2021.1990057
A. Biswal, S. Purohit, J. Pratapsingh, L. Mishra, M. Monalisa, S. B. Biswal, S. K Swain*,"Synergistic Effect of f-MWCNT and Nano Titania on Wound Healing Efficacy of Chitosan Films in Drosophila and Rat Models" ACS Applied Nano Material s(ACS), 6, 24, 23064–23077 (2023) (Impact Factor: 5.6) ISSN: 2574-0970 DOI: https://doi.org/10.1021/acsanm.3c04413
S. Purohit, A. Biswal, L. Mishra, M. Monalisa, S. B. Biswal, S. K Swain* "In vivo Wound Healing in Drosophila Melanogaster and Mouse models: Synergistic Effect of Bovine Serum Albumin and Graphene Quantum Dots" ACS Appl. Bio Mater.(ACS) 6, 12, 5531–5540 (2023) (Impact Factor: 4.7) ISSN: 2576-6422. DOI: https://doi.org/10.1021/acsabm.3c00743
S. K Das, D. Bharatia, B. Parhi, and S K Swain* “Influential factors modulating the dielectric behaviour of transition metal oxide nanocomposites for energy storage applications: A-state-of-the-art review” Journal of Energy Storage, 73, 108930 (Elsevier), (2023). (Impact Factor: 9.8) ISSN: 2352-1538. DOI: https://doi.org/10.1016/j.est.2023.108930
S. Patra, K. M Sahu, J. Mahanty, and S. K. Swain* “Ex Vivo Glucose Detection in Human Blood Serums with Carbon Quantum Dot-Doped Oleic Acid-Treated Chitosan Nanocomposites” ACS Appl. Bio Mater.(ACS) 6(12), 5730-5745 (2023) (Impact Factor: 4.7) ISSN: 2576-6422 https://doi.org/10.1021/acsabm.3c00851
S. Patra, S. Mishra, B. Parhi, H. Mishra, S. K. Swain* “Role of transition metal nanocomposites in organic reactions: A state of art as an alternative to conventional catalysts” Results in Chemistry (Elsevier), 6 (2023) 101172. (Impact Factor: 4.2) ISSN: 2211-7156. DOI: https://doi.org/10.1016/j.rechem.2023.101172
S. K. Swain*, Sk. Nazrul, S. K Das, A. Biswal and L. Behera, “Layered Double Hydroxides bundled Agar-g-PAN/Ag Nanocomposite Films: A Strategy to Improve Thermal, Barrier and Antibacterial Properties” Materials Today Communication, (Elsevier), 37, 107073 (2023). (Impact Factor: 4.5) ISSN: 2352-4928. DOI: https://doi.org/10.1016/j.mtcomm.2023.107073
A Biswal, S S Purohit and S. K. Swain* “Chitosan based composite scaffolds in skin wound repair: A review” Journal of Drug Delivery Science and Technology, (Elsevier)84, 104549(2023) (Impact Factor: 5.37) ISSN: 1773-2247. DOI: https://doi.org/10.1016/j.jddst.2023.104549
K. M. Sahu, S. Patra and S. K. Swain* “Host-Guest Drug Delivery by β-cyclodextrin Assisted Polysaccharide Vehicles: A Review. International Journal of Biological Macromolecules, (Elsevier), 240 124338(1-20) (2023). (Impact Factor: 8.5) ISSN: 1879-0003. DOI: https://doi.org/10.1016/j.ijbiomac.2023.124338
D. Bharatia, B. Parhi, and S K Swain*"Dielectric Study of Nanostructured Ternary Composite Derived from Amalgamated CuO/Ag2O on Graphene Oxide Sheets. Journal of Materials Research (Springer), 00, 00-00 (2023). (Impact Factor: 3.02) ISSN: 2044-5326. DOI: https://doi.org/ 10.1557/s43578-023-01068-9
S. Patra, S. S. Purohit and S. K. Swain* In vivo fluorescence non-enzymatic glucose sensing technique for diabetes management by CQDs incorporated dextran nanocomposites in human blood serums. Microchemical Journal, 109,108646 (1-10) (Elsevier), (2023). (Impact Factor: 5.1) ISSN: 0026-265X. DOI: https://doi.org/10.1016/j.microc.2023.108646
D. Bharatia, B. Parhi, H. Sahuand S K Swain*Factors influencing the dielectric properties of GO/MO nanocomposites: review, Journal of Materials Science: Materials in Electronics, 34(5), 452, (Springer), (2023). (Impact Factor: 2.8) ISSN: 0957-4522. DOI: https://doi.org/10.1007/s10854-023-09928-0
D. Bharatiya, S. Patra, B. Parhi and S K Swain* “A materials science approach towards bioinspired polymeric nanocomposites: a comprehensive review” International Journal of Polymeric Materials and Polymeric Biomaterials, 72(2), 119-134, (Tylor & Francis), (2023). (Impact Factor: 3.8) ISSN: 0091-4037. DOI: https://doi.org/10.1080/00914037.2021.1990057
A. Biswal, S. Purohit, J. Pratapsingh, L. Mishra, M. Monalisa, S. B. Biswal, S. K Swain*,"Synergistic Effect of f-MWCNT and Nano Titania on Wound Healing Efficacy of Chitosan Films in Drosophila and Rat Models" ACS Applied Nano Material s(ACS), 6, 24, 23064–23077 (2023) (Impact Factor: 5.6) ISSN: 2574-0970 DOI: https://doi.org/10.1021/acsanm.3c04413
S. Purohit, A. Biswal, L. Mishra, M. Monalisa, S. B. Biswal, S. K Swain* "In vivo Wound Healing in Drosophila Melanogaster and Mouse models: Synergistic Effect of Bovine Serum Albumin and Graphene Quantum Dots" ACS Appl. Bio Mater.(ACS) 6, 12, 5531–5540 (2023) (Impact Factor: 4.7) ISSN: 2576-6422. DOI: https://doi.org/10.1021/acsabm.3c00743
S. K Das, D. Bharatia, B. Parhi, and S K Swain* “Influential factors modulating the dielectric behaviour of transition metal oxide nanocomposites for energy storage applications: A-state-of-the-art review” Journal of Energy Storage, 73, 108930 (Elsevier), (2023). (Impact Factor: 9.8) ISSN: 2352-1538. DOI: https://doi.org/10.1016/j.est.2023.108930
S. Patra, K. M Sahu, J. Mahanty, and S. K. Swain* “Ex Vivo Glucose Detection in Human Blood Serums with Carbon Quantum Dot-Doped Oleic Acid-Treated Chitosan Nanocomposites” ACS Appl. Bio Mater.(ACS) 6(12), 5730-5745 (2023) (Impact Factor: 4.7) ISSN: 2576-6422 https://doi.org/10.1021/acsabm.3c00851
S. Patra, S. Mishra, B. Parhi, H. Mishra, S. K. Swain* “Role of transition metal nanocomposites in organic reactions: A state of art as an alternative to conventional catalysts” Results in Chemistry (Elsevier), 6 (2023) 101172. (Impact Factor: 4.2) ISSN: 2211-7156. DOI: https://doi.org/10.1016/j.rechem.2023.101172
S. K. Swain*, Sk. Nazrul, S. K Das, A. Biswal and L. Behera, “Layered Double Hydroxides bundled Agar-g-PAN/Ag Nanocomposite Films: A Strategy to Improve Thermal, Barrier and Antibacterial Properties” Materials Today Communication, (Elsevier), 37, 107073 (2023). (Impact Factor: 4.5) ISSN: 2352-4928. DOI: https://doi.org/10.1016/j.mtcomm.2023.107073
A Biswal, S S Purohit and S. K. Swain* “Chitosan based composite scaffolds in skin wound repair: A review” Journal of Drug Delivery Science and Technology, (Elsevier)84, 104549(2023) (Impact Factor: 5.37) ISSN: 1773-2247. DOI: https://doi.org/10.1016/j.jddst.2023.104549
K. M. Sahu, S. Patra and S. K. Swain* “Host-Guest Drug Delivery by β-cyclodextrin Assisted Polysaccharide Vehicles: A Review. International Journal of Biological Macromolecules, (Elsevier), 240 124338(1-20) (2023). (Impact Factor: 8.5) ISSN: 1879-0003. DOI: https://doi.org/10.1016/j.ijbiomac.2023.124338
D. Bharatia, B. Parhi, and S K Swain*"Dielectric Study of Nanostructured Ternary Composite Derived from Amalgamated CuO/Ag2O on Graphene Oxide Sheets. Journal of Materials Research (Springer), 00, 00-00 (2023). (Impact Factor: 3.02) ISSN: 2044-5326. DOI: https://doi.org/ 10.1557/s43578-023-01068-9
S. Patra, S. S. Purohit and S. K. Swain* In vivo fluorescence non-enzymatic glucose sensing technique for diabetes management by CQDs incorporated dextran nanocomposites in human blood serums. Microchemical Journal, 109,108646 (1-10) (Elsevier), (2023). (Impact Factor: 5.1) ISSN: 0026-265X. DOI: https://doi.org/10.1016/j.microc.2023.108646
D. Bharatia, B. Parhi, H. Sahuand S K Swain*Factors influencing the dielectric properties of GO/MO nanocomposites: review, Journal of Materials Science: Materials in Electronics, 34(5), 452, (Springer), (2023). (Impact Factor: 2.8) ISSN: 0957-4522. DOI: https://doi.org/10.1007/s10854-023-09928-0
D. Bharatiya, S. Patra, B. Parhi and S K Swain* “A materials science approach towards bioinspired polymeric nanocomposites: a comprehensive review” International Journal of Polymeric Materials and Polymeric Biomaterials, 72(2), 119-134, (Tylor & Francis), (2023). (Impact Factor: 3.8) ISSN: 0091-4037. DOI: https://doi.org/10.1080/00914037.2021.1990057
A. Biswal, S. Purohit, J. Pratapsingh, L. Mishra, M. Monalisa, S. B. Biswal, S. K Swain*,"Synergistic Effect of f-MWCNT and Nano Titania on Wound Healing Efficacy of Chitosan Films in Drosophila and Rat Models" ACS Applied Nano Material s(ACS), 6, 24, 23064–23077 (2023) (Impact Factor: 5.6) ISSN: 2574-0970 DOI: https://doi.org/10.1021/acsanm.3c04413
S. Purohit, A. Biswal, L. Mishra, M. Monalisa, S. B. Biswal, S. K Swain* "In vivo Wound Healing in Drosophila Melanogaster and Mouse models: Synergistic Effect of Bovine Serum Albumin and Graphene Quantum Dots" ACS Appl. Bio Mater.(ACS) 6, 12, 5531–5540 (2023) (Impact Factor: 4.7) ISSN: 2576-6422. DOI: https://doi.org/10.1021/acsabm.3c00743
S. K Das, D. Bharatia, B. Parhi, and S K Swain* “Influential factors modulating the dielectric behaviour of transition metal oxide nanocomposites for energy storage applications: A-state-of-the-art review” Journal of Energy Storage, 73, 108930 (Elsevier), (2023). (Impact Factor: 9.8) ISSN: 2352-1538. DOI: https://doi.org/10.1016/j.est.2023.108930
S. Patra, K. M Sahu, J. Mahanty, and S. K. Swain* “Ex Vivo Glucose Detection in Human Blood Serums with Carbon Quantum Dot-Doped Oleic Acid-Treated Chitosan Nanocomposites” ACS Appl. Bio Mater.(ACS) 6(12), 5730-5745 (2023) (Impact Factor: 4.7) ISSN: 2576-6422 https://doi.org/10.1021/acsabm.3c00851
S. Patra, S. Mishra, B. Parhi, H. Mishra, S. K. Swain* “Role of transition metal nanocomposites in organic reactions: A state of art as an alternative to conventional catalysts” Results in Chemistry (Elsevier), 6 (2023) 101172. (Impact Factor: 4.2) ISSN: 2211-7156. DOI: https://doi.org/10.1016/j.rechem.2023.101172
S. K. Swain*, Sk. Nazrul, S. K Das, A. Biswal and L. Behera, “Layered Double Hydroxides bundled Agar-g-PAN/Ag Nanocomposite Films: A Strategy to Improve Thermal, Barrier and Antibacterial Properties” Materials Today Communication, (Elsevier), 37, 107073 (2023). (Impact Factor: 4.5) ISSN: 2352-4928. DOI: https://doi.org/10.1016/j.mtcomm.2023.107073
A Biswal, S S Purohit and S. K. Swain* “Chitosan based composite scaffolds in skin wound repair: A review” Journal of Drug Delivery Science and Technology, (Elsevier)84, 104549(2023) (Impact Factor: 5.37) ISSN: 1773-2247. DOI: https://doi.org/10.1016/j.jddst.2023.104549
K. M. Sahu, S. Patra and S. K. Swain* “Host-Guest Drug Delivery by β-cyclodextrin Assisted Polysaccharide Vehicles: A Review. International Journal of Biological Macromolecules, (Elsevier), 240 124338(1-20) (2023). (Impact Factor: 8.5) ISSN: 1879-0003. DOI: https://doi.org/10.1016/j.ijbiomac.2023.124338
D. Bharatia, B. Parhi, and S K Swain*"Dielectric Study of Nanostructured Ternary Composite Derived from Amalgamated CuO/Ag2O on Graphene Oxide Sheets. Journal of Materials Research (Springer), 00, 00-00 (2023). (Impact Factor: 3.02) ISSN: 2044-5326. DOI: https://doi.org/ 10.1557/s43578-023-01068-9
S. Patra, S. S. Purohit and S. K. Swain* In vivo fluorescence non-enzymatic glucose sensing technique for diabetes management by CQDs incorporated dextran nanocomposites in human blood serums. Microchemical Journal, 109,108646 (1-10) (Elsevier), (2023). (Impact Factor: 5.1) ISSN: 0026-265X. DOI: https://doi.org/10.1016/j.microc.2023.108646
D. Bharatia, B. Parhi, H. Sahuand S K Swain*Factors influencing the dielectric properties of GO/MO nanocomposites: review, Journal of Materials Science: Materials in Electronics, 34(5), 452, (Springer), (2023). (Impact Factor: 2.8) ISSN: 0957-4522. DOI: https://doi.org/10.1007/s10854-023-09928-0
D. Bharatiya, S. Patra, B. Parhi and S K Swain* “A materials science approach towards bioinspired polymeric nanocomposites: a comprehensive review” International Journal of Polymeric Materials and Polymeric Biomaterials, 72(2), 119-134, (Tylor & Francis), (2023). (Impact Factor: 3.8) ISSN: 0091-4037. DOI: https://doi.org/10.1080/00914037.2021.1990057
A. Biswal, S. Purohit, J. Pratapsingh, L. Mishra, M. Monalisa, S. B. Biswal, S. K Swain*,"Synergistic Effect of f-MWCNT and Nano Titania on Wound Healing Efficacy of Chitosan Films in Drosophila and Rat Models" ACS Applied Nano Material s(ACS), 6, 24, 23064–23077 (2023) (Impact Factor: 5.6) ISSN: 2574-0970 DOI: https://doi.org/10.1021/acsanm.3c04413
S. Purohit, A. Biswal, L. Mishra, M. Monalisa, S. B. Biswal, S. K Swain* "In vivo Wound Healing in Drosophila Melanogaster and Mouse models: Synergistic Effect of Bovine Serum Albumin and Graphene Quantum Dots" ACS Appl. Bio Mater.(ACS) 6, 12, 5531–5540 (2023) (Impact Factor: 4.7) ISSN: 2576-6422. DOI: https://doi.org/10.1021/acsabm.3c00743
S. K Das, D. Bharatia, B. Parhi, and S K Swain* “Influential factors modulating the dielectric behaviour of transition metal oxide nanocomposites for energy storage applications: A-state-of-the-art review” Journal of Energy Storage, 73, 108930 (Elsevier), (2023). (Impact Factor: 9.8) ISSN: 2352-1538. DOI: https://doi.org/10.1016/j.est.2023.108930
S. Patra, K. M Sahu, J. Mahanty, and S. K. Swain* “Ex Vivo Glucose Detection in Human Blood Serums with Carbon Quantum Dot-Doped Oleic Acid-Treated Chitosan Nanocomposites” ACS Appl. Bio Mater.(ACS) 6(12), 5730-5745 (2023) (Impact Factor: 4.7) ISSN: 2576-6422 https://doi.org/10.1021/acsabm.3c00851
S. Patra, S. Mishra, B. Parhi, H. Mishra, S. K. Swain* “Role of transition metal nanocomposites in organic reactions: A state of art as an alternative to conventional catalysts” Results in Chemistry (Elsevier), 6 (2023) 101172. (Impact Factor: 4.2) ISSN: 2211-7156. DOI: https://doi.org/10.1016/j.rechem.2023.101172
S. K. Swain*, Sk. Nazrul, S. K Das, A. Biswal and L. Behera, “Layered Double Hydroxides bundled Agar-g-PAN/Ag Nanocomposite Films: A Strategy to Improve Thermal, Barrier and Antibacterial Properties” Materials Today Communication, (Elsevier), 37, 107073 (2023). (Impact Factor: 4.5) ISSN: 2352-4928. DOI: https://doi.org/10.1016/j.mtcomm.2023.107073
A Biswal, S S Purohit and S. K. Swain* “Chitosan based composite scaffolds in skin wound repair: A review” Journal of Drug Delivery Science and Technology, (Elsevier)84, 104549(2023) (Impact Factor: 5.37) ISSN: 1773-2247. DOI: https://doi.org/10.1016/j.jddst.2023.104549
K. M. Sahu, S. Patra and S. K. Swain* “Host-Guest Drug Delivery by β-cyclodextrin Assisted Polysaccharide Vehicles: A Review. International Journal of Biological Macromolecules, (Elsevier), 240 124338(1-20) (2023). (Impact Factor: 8.5) ISSN: 1879-0003. DOI: https://doi.org/10.1016/j.ijbiomac.2023.124338
D. Bharatia, B. Parhi, and S K Swain*"Dielectric Study of Nanostructured Ternary Composite Derived from Amalgamated CuO/Ag2O on Graphene Oxide Sheets. Journal of Materials Research (Springer), 00, 00-00 (2023). (Impact Factor: 3.02) ISSN: 2044-5326. DOI: https://doi.org/ 10.1557/s43578-023-01068-9
S. Patra, S. S. Purohit and S. K. Swain* In vivo fluorescence non-enzymatic glucose sensing technique for diabetes management by CQDs incorporated dextran nanocomposites in human blood serums. Microchemical Journal, 109,108646 (1-10) (Elsevier), (2023). (Impact Factor: 5.1) ISSN: 0026-265X. DOI: https://doi.org/10.1016/j.microc.2023.108646
D. Bharatia, B. Parhi, H. Sahuand S K Swain*Factors influencing the dielectric properties of GO/MO nanocomposites: review, Journal of Materials Science: Materials in Electronics, 34(5), 452, (Springer), (2023). (Impact Factor: 2.8) ISSN: 0957-4522. DOI: https://doi.org/10.1007/s10854-023-09928-0
D. Bharatiya, S. Patra, B. Parhi and S K Swain* “A materials science approach towards bioinspired polymeric nanocomposites: a comprehensive review” International Journal of Polymeric Materials and Polymeric Biomaterials, 72(2), 119-134, (Tylor & Francis), (2023). (Impact Factor: 3.8) ISSN: 0091-4037. DOI: https://doi.org/10.1080/00914037.2021.1990057
A. Biswal, S. Purohit, J. Pratapsingh, L. Mishra, M. Monalisa, S. B. Biswal, S. K Swain*,"Synergistic Effect of f-MWCNT and Nano Titania on Wound Healing Efficacy of Chitosan Films in Drosophila and Rat Models" ACS Applied Nano Material s(ACS), 6, 24, 23064–23077 (2023) (Impact Factor: 5.6) ISSN: 2574-0970 DOI: https://doi.org/10.1021/acsanm.3c04413
S. Purohit, A. Biswal, L. Mishra, M. Monalisa, S. B. Biswal, S. K Swain* "In vivo Wound Healing in Drosophila Melanogaster and Mouse models: Synergistic Effect of Bovine Serum Albumin and Graphene Quantum Dots" ACS Appl. Bio Mater.(ACS) 6, 12, 5531–5540 (2023) (Impact Factor: 4.7) ISSN: 2576-6422. DOI: https://doi.org/10.1021/acsabm.3c00743
S. K Das, D. Bharatia, B. Parhi, and S K Swain* “Influential factors modulating the dielectric behaviour of transition metal oxide nanocomposites for energy storage applications: A-state-of-the-art review” Journal of Energy Storage, 73, 108930 (Elsevier), (2023). (Impact Factor: 9.8) ISSN: 2352-1538. DOI: https://doi.org/10.1016/j.est.2023.108930
S. Patra, K. M Sahu, J. Mahanty, and S. K. Swain* “Ex Vivo Glucose Detection in Human Blood Serums with Carbon Quantum Dot-Doped Oleic Acid-Treated Chitosan Nanocomposites” ACS Appl. Bio Mater.(ACS) 6(12), 5730-5745 (2023) (Impact Factor: 4.7) ISSN: 2576-6422 https://doi.org/10.1021/acsabm.3c00851
S. Patra, S. Mishra, B. Parhi, H. Mishra, S. K. Swain* “Role of transition metal nanocomposites in organic reactions: A state of art as an alternative to conventional catalysts” Results in Chemistry (Elsevier), 6 (2023) 101172. (Impact Factor: 4.2) ISSN: 2211-7156. DOI: https://doi.org/10.1016/j.rechem.2023.101172
S. K. Swain*, Sk. Nazrul, S. K Das, A. Biswal and L. Behera, “Layered Double Hydroxides bundled Agar-g-PAN/Ag Nanocomposite Films: A Strategy to Improve Thermal, Barrier and Antibacterial Properties” Materials Today Communication, (Elsevier), 37, 107073 (2023). (Impact Factor: 4.5) ISSN: 2352-4928. DOI: https://doi.org/10.1016/j.mtcomm.2023.107073
A Biswal, S S Purohit and S. K. Swain* “Chitosan based composite scaffolds in skin wound repair: A review” Journal of Drug Delivery Science and Technology, (Elsevier)84, 104549(2023) (Impact Factor: 5.37) ISSN: 1773-2247. DOI: https://doi.org/10.1016/j.jddst.2023.104549
K. M. Sahu, S. Patra and S. K. Swain* “Host-Guest Drug Delivery by β-cyclodextrin Assisted Polysaccharide Vehicles: A Review. International Journal of Biological Macromolecules, (Elsevier), 240 124338(1-20) (2023). (Impact Factor: 8.5) ISSN: 1879-0003. DOI: https://doi.org/10.1016/j.ijbiomac.2023.124338
D. Bharatia, B. Parhi, and S K Swain*"Dielectric Study of Nanostructured Ternary Composite Derived from Amalgamated CuO/Ag2O on Graphene Oxide Sheets. Journal of Materials Research (Springer), 00, 00-00 (2023). (Impact Factor: 3.02) ISSN: 2044-5326. DOI: https://doi.org/ 10.1557/s43578-023-01068-9
S. Patra, S. S. Purohit and S. K. Swain* In vivo fluorescence non-enzymatic glucose sensing technique for diabetes management by CQDs incorporated dextran nanocomposites in human blood serums. Microchemical Journal, 109,108646 (1-10) (Elsevier), (2023). (Impact Factor: 5.1) ISSN: 0026-265X. DOI: https://doi.org/10.1016/j.microc.2023.108646
D. Bharatia, B. Parhi, H. Sahuand S K Swain*Factors influencing the dielectric properties of GO/MO nanocomposites: review, Journal of Materials Science: Materials in Electronics, 34(5), 452, (Springer), (2023). (Impact Factor: 2.8) ISSN: 0957-4522. DOI: https://doi.org/10.1007/s10854-023-09928-0
D. Bharatiya, S. Patra, B. Parhi and S K Swain* “A materials science approach towards bioinspired polymeric nanocomposites: a comprehensive review” International Journal of Polymeric Materials and Polymeric Biomaterials, 72(2), 119-134, (Tylor & Francis), (2023). (Impact Factor: 3.8) ISSN: 0091-4037. DOI: https://doi.org/10.1080/00914037.2021.1990057
Padhi, P. K., et al. "Shifting roles of Women through the Lens of Indian Popular Media" in International Journal of Social Sciences and Humanities Invention. Vol. 10, No. II, 2023, ISSN. 2349-2031 p. 7742â€“48 DOI: 10.18535/ijsshi/v10i02.07
Padhi, P. K., et al. "Shifting roles of Women through the Lens of Indian Popular Media" in International Journal of Social Sciences and Humanities Invention. Vol. 10, No. II, 2023, ISSN. 2349-2031 p. 7742â€“48 DOI: 10.18535/ijsshi/v10i02.07
Padhi, P. K., et al. "Shifting roles of Women through the Lens of Indian Popular Media" in International Journal of Social Sciences and Humanities Invention. Vol. 10, No. II, 2023, ISSN. 2349-2031 p. 7742â€“48 DOI: 10.18535/ijsshi/v10i02.07
Padhi, P. K., et al. "Shifting roles of Women through the Lens of Indian Popular Media" in International Journal of Social Sciences and Humanities Invention. Vol. 10, No. II, 2023, ISSN. 2349-2031 p. 7742â€“48 DOI: 10.18535/ijsshi/v10i02.07
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra, N Nahak, B Rout, Nanda, A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra, N Nahak, B Rout, Nanda, A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra, N Nahak, B Rout, Nanda, A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra, N Nahak, B Rout, Nanda, A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra, N Nahak, B Rout, Nanda, A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra, N Nahak, B Rout, Nanda, A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
"Energy-Efficient Forecasting of Temperature Data in Sensor Cloud System Using a Hybrid SVM-ANN Method", Kalyan Das, Satyabrata Das & Sibarama Panigrahi , Wireless Personal Communications, 2023(Springer), (SCI), DOI: https://doi.org/10.1007/s11277-023-10265-y
"Energy Competent Clustering Algorithm for Minimization of Holes in Heterogeneous Wireless Sensor Networks", Chinmaya Ku. Nayak &Â Satyabrata Das, Int. J. of System of Systems Engineering,Â (Scopus), Inderscience(Accepted).
S.K. Sahu, N.K. Kund, Impact of coolant water flow rate and temperature underside cooling slope on solidification with microstructure and mechanical properties of casted AZ91 Mg alloy, Archives of Metallurgy and Materials, 2023, 68(2), p. 673–680. (SCI) PAS (Impact Factor = 0.6). https://doi.org/10.24425/amm.2023.142448
S.K. Sahu, N.K. Kund, Influence of slurry delivery rate and height from cooling slope outlet on solidification and structural behaviors of molded AZ91 magnesium alloy, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2023, 237(7), p. 1719–1727. (SCI) SAGE (Impact Factor = 2.0). https://doi.org/10.1177/09544062221133221
Swain, P. K., & Biswal, T*. (2023). Assessment of groundwater quality in terms of water quality index (WQI) and fluoride contamination of Nuapada District, Odisha, India. Applied Water Science, 13(11), 218. https://doi.org/10.1007/s13201-023-02030-0 (Scopus, SCI, IF: 3.057)
Biswal, T. (2023). Future perspectives of biopolymeric industry. Physical Sciences Reviews, https://doi.org/10.1515/psr-2022-0192, (Scopus, ESCI)
Biswal, T. (2023). Biopolymeric conjugation with synthetic fibers and applications. Physical Sciences Reviews, https://doi.org/10.1515/psr-2022-0183. (Scopus, ESCI)
Sahoo, D. R., & Biswal, T*. (2023). Complex catalyzed synthesis and prediction of properties of poly (acrylonitrile?co?acrylamide)/crab shell powder composites by using artificial neural network. Polymer Composites, 44(70, 4178-4189 (Scopus, SCI, IF:3.531)
Sethy, T. R., Biswal, T*., & Sahoo, P. K. (2023). An indigenous tool for the adsorption of rare earth metal ions from the spent magnet e-waste: An eco-friendly chitosan biopolymer nanocomposite hydrogel. Separation and Purification Technology, 309, 122935 (Scopus, SCI, IF: 9.136).
Sahoo, D. R., & Biswal, T*. (2023). Synthesis and optimization of properties of Poly (AN-co-AA)/fish bone biocomposite by using artificial neural networks. Polymer Bulletin, 80(6), 6545-6565. (Scopus, SCI, IF: 2.843).
Biswal, T*, Swain P. K. & Panda, R.B. (2023) Assessment of soil quality, modelling in and around steel city Rourkela, Odisha, India, online Published in International Journal of Environment and Waste Management. DOI: 10.1504/IJEWM.2023.10044171 (Scopus)
Biswal, T., Shadangi, K. P., & Sarangi, P. K. (2023). Application of nanotechnology in the production of biohydrogen: a review. Chemical Engineering & Technology, 46(2), 218-233. (Scopus, SCI, IF: 2.215)
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra, N Nahak, B Rout, Nanda, A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra, N Nahak, B Rout, Nanda, A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra, N Nahak, B Rout, Nanda, A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra, N Nahak, B Rout, Nanda, A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra, N Nahak, B Rout, Nanda, A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra, N Nahak, B Rout, Nanda, A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra, N Nahak, B Rout, Nanda, A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra, N Nahak, B Rout, Nanda, A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra, N Nahak, B Rout, Nanda, A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra, N Nahak, B Rout, Nanda, A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra, N Nahak, B Rout, Nanda, A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra, N Nahak, B Rout, Nanda, A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra, N Nahak, B Rout, Nanda, A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra, N Nahak, B Rout, Nanda, A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra, N Nahak, B Rout, Nanda, A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra, N Nahak, B Rout, Nanda, A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra, N Nahak, B Rout, Nanda, A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra, N Nahak, B Rout, Nanda, A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra, N Nahak, B Rout, Nanda, A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra, N Nahak, B Rout, Nanda, A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra, N Nahak, B Rout, Nanda, A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra, N Nahak, B Rout, Nanda, A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
G S Panigrahi, A Nanda, A K Patra, B Rout, A K Mishra, V L Patra, Vehicle Suspension System based on Adaptive Control Algorithm, IEEE International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201779, 09 August 2023
A K Patra, G S Panigrahi, V L Patra, A K Mishra, N Nahak, B Rout, Adaptive Control with Disturbance Modelling for BG Regulation in TIDM Patient, IEEE 2023 International Conference in Advances in Power, Signal, and Information Technology (APSIT), 10.1109/APSIT58554.2023.10201660, 10.1109/APSIT58554.2023.10201660
A K Patra, R Agrawal, M K Debnath, B Rout; A Mishra, V L Patra, Vehicle Suspension Control Using LQR Technique, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245714, 09-12 August 2023
A K Patra; N Nahak; B Rout; A Nanda; A K Mishra, M K Debnath, Design of Remora Optimized FOPID Controller (RO-FOPIDC) for Balancing an Inverted Pendulum (IP), IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET),10.1109/SeFeT57834.2023.10245770, 20 September 2023
A K Patra, G S Panigrahi, V L Patra, M K Debnath, A K Mishra, B Rout, Optimal BG Regulation in TIDM Patient Based on Adaptive Control Algorithm, IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET), 10.1109/SeFeT57834.2023.10245586, 20 September 2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023
Mohapatra, S., Sahoo, D., Sahoo, A. K., Sharp, B. & Wen, Le (2023). Heterogeneous climate effect on crop yield and associated risks to water security in India, International Journal of Water Resources Development, (Early View).
Mohapatra, S., Das, A., Sahoo, D., Sharp, B., & Sahoo, A. K. (2023). How climate-included variations in crop yields affect migration in India. International Journal of Social Economics. (Early View).
Sahoo, B., Sahoo, M., & Sahoo, A. K. (2023). Does Gender Equality Influence Climate Change in Emerging Market Economies?. Asian Economics Letters, 4 (Early View).
I. Rout, T. R. Mahapatra, A. K. Rout, D. Mishra, A. K. Rout, (2023) Study on Effect of Process Parameters on AJM of Partially Biodegradable Hybrid Composite Using TOPSIS Approach. Lecture Notes in Mechanical Engineering. 341–354, Springer, Singapore. doi: 10.1007/978-981-99-2921-4_32 (IF: 0.19, SCOPUS)
L. Mishra, T. R. Mahapatra, S. R. Parimanik, S. Dash, D. Mishra, (2023) Parametric Optimization in Nd:YAG Laser Micro-drilling of Carbon Black/Epoxy Composite Utilizing GRA and Response Surface Methodology. Lecture Notes in Mechanical Engineering. 917–927 Springer, Singapore. doi: 10.1007/978-981-99-2921-4_82. (IF: 0.19, SCOPUS)
A. Ekka, A. Panda, T. R. Mahapatra, D. Mishra, (2023) Erosion and wear analysis of fly ash filled GFRP composite, Materials Today: Proceedings, doi: 10.1016/j.matpr.2023.01.140. (IF: 2.59, SCOPUS)
S. R. Parimanik, T. R. Mahapatra, D. Mishra and A. K. Rout, (2023) Dissimilar Laser Welding of NiTi Alloy with Ferrous and Non-ferrous Material: Optimization of Process Parameters, E3S Web of Conferences, 391, 01167, DOI: 10.1051/e3sconf/202339101167. (IF: 0.38, SCOPUS)
B. Dash, T. R. Mahapatra, D. Mishra, A. K. Rout, (2023) Acoustic radiation efficiencies of laminated composite structure under mechanical excitation and hygrothermal loading: Numerical analysis, Materials Today: Proceedings, 91 (1), 25-32 doi: 10.1016/j.matpr.2023.04.269. (IF: 2.59, SCOPUS)
S. Dash, T. R. Mahapatra, K. Mehar, I. Panigrahi, and D. Mishra, (2023) Finite element analysis of thermoelastic free vibration behaviour of hardcore higher-order doubly curved sandwich shell panel, International Journal of Structural Engineering, vol. 13, no. 1, pp. 80–108, doi: 10.1504/IJSTRUCTE.2023.126792. (IF: 1.309, SCOPUS)
M. Das, S. R. Parimanik, T. R. Mahapatra, D. Mishra, (2023) Effect of graphene reinforcement on the mechanical characteristics and machining performance of aluminium metal matrix composite, International Journal of Process Management and Benchmarking, vol. 14, no. 4, pp. 478-507, doi: 10.1504/IJPMB.2023.132216. (IF: 0.24, SCOPUS)
L Mishra, TR Mahapatra, D Mishra, SR Parimanik (2023) Machinability study, machining performance optimisation and sustainability assessment in laser micro-drilling of CNT/epoxy nanocomposite, International Journal of Machining and Machinability of Materials, 25 (2), 111-139, doi: 10.1504/IJMMM.2023.133377. (IF: 0.273, SCOPUS)
S. R. Parimanik, T. R. Mahapatra, D. Mishra, A. K. Rout, (2023) Optimisation of performance characteristics in laser welding of Nitinol wires using Taguchi and grey relation analysis, Advances in Materials and Processing Technologies, vol. 9, no. 1, pp. 186-195, doi: 10.1080/2374068X.2022.2088653. (IF: 4.73, SCOPUS)
S. R. Parimanik, T. R. Mahapatra, and D. Mishra, (2023) A Systematic Literature Review on Laser Welding of NiTi SMA, Lasers Manuf. Mater. Process., vol. 10, no.1, pp. 77-117, doi: 10.1007/s40516-022-00200-7. (IF: 1.673, SCOPUS)
I. Rout, T. R. Mahapatra, and D. Mishra, (2023) Synthesis and Characterization of Incense Stick Ash Filled Luffa cylindrica/Hair Fiber Reinforced Partially Biodegradable Composite. Fibers and Polymers 24, 1417–1430. doi: 10.1007/s12221-023-00123-w. (IF: 2.347, SCIE)
M Das, SR Parimanik, TR Mahapatra, D Mishra, DK Sahu (2023) Characteristics, Machinability Modeling, and Machining Performance Improvement of Graphene Reinforced Al-MMC Using CRSM and Utility Method. Journal of Superhard Materials 45 (4), 266-292. Doi: 10.3103/S1063457623040020 (IF: 0.9, SCIE)
B Dash, TR Mahapatra, D Mishra (2023) Numerical vibroacoustic analysis of multi-layered composite structure under hygrothermal loading using coupled FEM-IBEM micromechanical model. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. doi: 10.1177/09544062231205359 (IF: 2.0, SCI)
P K Sahu, T R Mahapatra, S Jaypuria, and D Mishra (2023) Optimization of static response of l aminated composite plate using nonlinear FEM and ANOVA Taguchi method, Steel and Composite Structures, 48(6) 625-639, https://doi.org/10.12989/scs.2023.48.6.625, (IF: 4.6, SCIE, SCOPUS)
Sagarika Rout and Gyan Ranjan Biswal, “Integration of Distributed Generations by coordinating Electric Vehicle Charging Station in Medium Voltage Network by Swarm Intelligence,” World Journal of Engineering, Emerald, Vol. 20, No. 6, pp. 1097 – 1111, Nov. 2023. DOI: 10.1108/WJE-03-2022-0105 (IF: 2.011)
Padhi, P. K., et al. "Shifting roles of Women through the Lens of Indian Popular Media" in International Journal of Social Sciences and Humanities Invention. Vol. 10, No. II, 2023, ISSN. 2349-2031 p. 7742â€“48 DOI: 10.18535/ijsshi/v10i02.07
Grid-connected solar PV fed BLDC motor drive for water pumping system, Distributed Generation & Alternative Energy Journal, 1477-1504, 2023
A Formyl Chromone based Schiff base Derivative: An Efficient Colorimetric and Fluorescence Chemosensor for the Selective Detection of Hg2+ ions. Soumya R. Kar, Pragyan P. Dash, Sankalpa N. Panda, Patitapaban Mohanty, Debasis Mohanty, Aruna K. Barick, Suban K. Sahoo, Priyaranjan Mohapatra, Bigyan R. Jali*, Journal of Fluorescence, 2023.
Pyrene-based fluorescent chemosensor for rapid detection of water and its applications Pragyan P. Dash, P. Mohanty, S. Behera, R. Behura, Bibhuti B. Palai, Bhaskar Nath ,Suban K. Sahoo, Bigyan R. Jali*, Methods 219 (2023) 127-138.
Investigation of in vitro antimicrobial, antioxidant and antiproliferative activities of Nostoc calcicola biosynthesized gold nanoparticles. Chinmayee Priyadarsani Mandhata, Ajit Kumar Bishoyi, Chita Ranjan Sahoo, Surendra Swain, Shuvasree Bej, Bigyan R. Jali, Rajesh Kumar Meher, Debasmita Dubey, Rabindra Nath Padhy. Bioprocess and Biosystems Engineering 2023
Rapid colorimetric and fluorometric discrimination of maleic acid vs. fumaric acid and detection of maleic acid in food additives. Pragyan P. Dash, P. Mohanty, R. Behura, S. Behera, S. Naik, M. Mishra H. Sahoo, Aruna K. Barick, P. Mohapatra, Suban K. Sahoo, Bigyan R. Jali*. Journal of Fluorescence, 2023, 1-10.
A Highly Selective Schiff base Fluorescent Sensor for Zn2+, Cd2+ and Hg2+ based on 2,4-dinitrophenylhydrazine Derivative. R. Behura, P. Mohanty, G. Sahu, P.P. Dash, S. Behera, R. Dinda, P.R. Hota, H. Sahoo, R. Bhaskaran, A.K. Barick, P. Mohapatra, B. R. Jali*. Inorganic Chemistry Communications 2023, 110959.
Advances on chromo-fluorogenic sensing of copper (II) with Schiff bases. Pragyan Parimita Dash, Dhvani A. Patel, Patitapaban Mohanty, Rubi Behura, S. Behera, Suban K. Sahoo, B. R. Jali*. Inorganica Chimica Acta. 2023, 121635.
Polyethyleneimine-based fluorescent polymeric nanoparticles: synthesis and application in fluorescence sensing of pH and para-nitrophenol†. A. K. Saini, B. R. Jali, S. K. Sahoo, New J. Chem., 47 (2023) 9250-9256.
Detection of moisture in DMSO and raw food products by using an anthracene-based fluorescence OFF-ON chemosensor. P. P. Dash, P. Mohanty, R. Behura, S. Behera, P. Singla, S. C. Sahoo, S.K. Sahoo, B. R. Jali*. Journal of Photochemistry and Photobiology A: Chemistry. 440 (2023) 114650.
A thiourea-based fluorescent turn-on chemosensor for detecting Hg2+, Ag+ and Au3+ in aqueous medium. P. Mohanty, P. P. Dash, S. Naik, R. Behura, M. Mishra, H. Sahoo , S. K. Sahoo, A.K. Barick, B. R. Jali*, Journal of Photochemistry and Photobiology A: Chemistry. 437 (2023), 114491.
Water-induced fluorescence turn-on imidazole derivative and its interaction with bovine serum albumin. S. Behera, P. P. Dash, P. Mohanty, R. Behura , S. K. Sahoo, B.R. Jali*, Journal of Molecular Structure. 1282 (2023), 135158.
Selective Binding of Bovine Serum Albumin (BSA): A Comprehensive Review. S. Behera, P. Mohanty, P. P. Dash, P. Mohapatra, L. Shubhadarshinee, R. Behura, A. K. Barick, P. Mohapatra, B. R. Jali*, Biointreface Research in Applied Chemistry. 13 (2023), 555.
Green Synthesis, Characterization, and Acoustical Analysis of Copper Quantum Dots (Cu QDs) Using Leaf Extract of Mangifera indica Plant. S. Behera, L. Shubhadarshinee, P. Mohapatra, B. R. Jali, P. Mohapatra, A. K. Barick. Journal of Molecular and Engineering Materials. 2023.
Quinoline a Versatile Molecular Probe for Zinc Sensor: A Mini Review, P. Mohanty, P. P. Dash, R. Behura, S. Behera, A. K. Barick, and B.R. Jali*, Letter in Applied Nano-BioScience, 12 (2023) 123.
A Versatile Molecular Probe of Napthalimide-derivative for Zn (II) Sensor: A Mini-Review. P. P. Das, P. Mohanty, A. K. Barick, P. Mohapatra and B. R. Jali*, TRENDS IN SCIENCES 20 (2023) 1.
Subrat Kumar Sethi and Arunanshu Mahapatro. A Deep Learning-Based Discrete-Time Markov Chain Analysis of Cognitive Radio Network for Sustainable Internet of Things in 5G-Enabled Smart City. Iranian Journal of Science and Technology, Transactions of Electrical Engineering, Springer, Accepted, 2023.
Radhashyam Patra, Arunanshu Mahapatro and Kwonhue Choi. Orthogonal affine precoding and decoding based channel estimation and data detection in frequency reversed Alamouti coded FBMCOQAM system. International Journal of Information Technology, Springer, Accepted, 2023.
Subrat Kumar Sethi and Arunanshu Mahapatro. Interference aware intelligent routing in cognitive radio based Vehicular Adhoc networks for smart city applications. International Journal of Information Technology, Springer, Accepted, 2023.
V CH Sekhar Rao Rayavarapu and Arunanshu Mahapatro. Design and Development of Mobile Anchor Assisted Node Localization Strategy using a Hybrid Electric-Coyote Optimization. Evolutionary Intelligence, Springer, Accepted, 2023.
J Alam, S Panda A comprehensive study on multi-objective design optimization of spur gear,Mechanics Based Design of Structures and Machines 51 (9), 5272-5298
S. Sahoo, H. Barik and P. Patro, Heat Transfer Study of Water and Air Based Nanofluids with Al2O3 Nanoparticle in a Circular Pipe Using Multiphase Approach, Particulate Science and Technology, 42(3), 393-407 (2023).
R. Ray, A Mohanty, P. Patro and S. K. Senapati, Performance improvement of a heat sink with triangular slotted and interrupted fins: A Computational study, Applied Thermal Engineering, 230, 120783 (2023).
Dash, P. K., Pathi, S. K., Patro, S. K. and Panigrahi, R.,2023, Influence of chemical constituents of binder and activator in predicting compressive strength of fly ash-based geopolymer concrete using firefly-optimized hybrid ensemble machine learning model, Materials Today Communications SCIE, vol 37, 107485
Dash, P. K., Pathi, S. K., Patro, S. K. and Panigrahi, R.,2023, Efficient machine learning algorithm with enhanced cast swarm optimization for prediction of compressive strength of GGBS-based geopolymer concrete at elevated temperature, Construction and Building materials, https://doi.org/10.1016/j.conbuildmat.2023.132814, SCIE, vol 400, October,
Prusty, S., Jena, S. and Panigrahi, R.,2023, Assessment of acid and chloride resistance of ferrochrome slag-based geopolymer concrete, Indian Concrete Journal, Scopus, August
Prusty, R. S., Jena, S. and Panigrahi, R., 2023, Characterisation and life-cycle assessment of alkali-activated concrete using industrial wastes, International Journal of Environmental Science and Technology, DOI 10.1007/s13762-023-05100-7, SCIE, online 29 July
Jena, S. and Panigrahi, R.,2023, Evaluation of Durability and Microstructural Properties of Geopolymer Concrete with Ferrochrome Slag as Coarse Aggregate, Iranian Journal of Science and Technology, Transactions of Civil Engineering, Springer, SCIE
Prakash Kumar Sarangi, Akhilesh Kumar Singh, Sashi Sonkar, Krushna Prasad Shadangi, Rajesh Kumar Srivastava, Vijai Kumar Gupta, Jigisha Parikh, Uttam Kumar Sahoo, Muthusamy Govarthanan. Biorefinery solutions for food processing wastes: A sustainable bioeconomic perspective. Industrial Crops and Products 205, (2023) 117488.
Anjani RK Gollakota, Chi-Min Shu, Prakash Kumar Sarangi, Krushna Prasad Shadangi, Sudip Rakshit, John F Kennedy, Vijai Kumar Gupta, Minaxi Sharma. Catalytic hydrodeoxygenation of bio-oil and model compounds-Choice of catalysts, and mechanisms. Renewable and Sustainable Energy Reviews 187, (2023) 113700.
Arjun Agrawal, Jayaprakash Panda & Krushna Prasad Shadangi. Study the Soret effects on Bioconvective induced magneto-hydrodynamics flow in presence of multiple slip and thermal radiation. Numerical Heat Transfer, Part B: Fundamentals (2023).
Rajesh K. Srivastava, Sruthy Vineed Nedungadi, Nasim Akhtar, Prakash Kumar Sarangi, Sanjukta Subudhi, Krushna Prasad Shadangi, Muthusamy Govarthanan. Effective hydrolysis for waste plant biomass impacts sustainable fuel and reduced air pollution generation: A comprehensive review. Science of the Total Environment 859 (2023) 160260.
Anjani RK. Gollakota, Venkata Subbaiah Munagapati, Sheng-Wei Liao, Chi-Min Shu, Krushna Prasad Shadangi, Prakash K. Sarangi, Jet-Chau Wen. Ionic liquid [bmim] [TFSI] templated Na-X zeolite for the adsorption of (Cd2+, Zn2+), and dyes (AR, R6). Environmental Research 216, (2023) 114525.
Rajesh K. Srivastavaa, Prakash Kumar Sarangi, Krushna Prasad Shadangi, Soumya Sasmal, Vijai Kumar Gupta, Muthusamy Govarthanan, Uttam Kumar Sahoo, Sanjukta Subudhi. Biorefineries development from agricultural byproducts: Value addition and circular bioeconomy. Sustainable Chemistry and Pharmacy 32 (2023) 100970.
Monika Kumari, Fernanodo Vega, Luz M Gallego Fernández, Krushna Prasad Shadangi, Naveen Kumar. Liquid Amine functional, aqueous blends and the CO2 absorption capacity: molecular structure, size, interaction parameter and mechanistic aspects. Journal of Molecular Liquids 384, (2023) 122288.
Arati Ray, Manish Kumar, Adnan Asad Karim, Kushalindu Biswas, Sibadutta Mohanty, Krushna Prasad Shadangi, Sunil Kumar, Binoy Sarkar. Potassium phosphorus sulfur Augmented biochar production from potentially toxic elements abated gypsum pond wastewater of phosphate fertilizer industry. Journal of Environmental Chemical Engineering 11, (2023) 110404.
Shivi Garg, Anand Nayyar, Abdulrajak Buradi, Krushna Prasad Shadangi, Prabhakar Sharma, Bhaskor Jyoti Bora , Akshay Jain & Mohd Asif Shah. A novel investigation using thermal modeling and optimization of waste pyrolysis reactor using finite element analysis and response surface methodology. Scientific Reports (Nature publication) 13, (2023) 10931.
Munmi Bhattacharyya, Krushna Prasad Shadangi, Pinakeswar Mahanta, Kaustubha Mohanty, Thermo?catalytic pyrolysis of sawdust by a synthesized NiO/Al2O3 composite catalyst: investigation on its reaction mechanism, kinetics, and thermodynamics. Chemical Papers 77, (2023) 4877–4903.
Sarthak Saxena, Shweta Rawat, Soumya Sasmal, Krushna Prasad Shadangi. A mini review on microwave and contemporary based biohydrogen production technologies: a comparison. Environmental Science and Pollution Research 30, (2023) 124735–124747.
Prakash Kumar Sarangi, Sanjukta Subudhi, Latika Bhatia, Koel Saha, Divya Mudgil, Krushna Prasad Shadangi, Rajesh K. Srivastava, Bhabjit Pattnaik & Raj Kumar Arya. Utilization of Agricultural Waste Biomass and Recycling Towards Circular Bioeconomy. Environmental Science and Pollution Research 30, (2023) 8526–8539.
Anchal Kumawat and Sucheta Panda, “An Integrated Double Hybrid Fusion Approach for Image Smoothing", International Journal of Image and Graphics, World Scientific Publishing Company, Vol. 23, No. 1 (2023) 2350003 (23 pages)DOI : https://doi.org/10.1142/S0219467823500031, Scopus, Impact Factor – 1.6, Unpaid, ISSN: 1793-6756(e_ISSN), 0219-4678(p_ISSN).
Biswaranjan Achrya, Ahona Ghosh,Sucheta Panda and Yu-Chen Hu, “ Automated Plant Recognition System with Geographical Position Selection for Medicinal Plants ”, Hindawi , Scopus, Advances in Multimedia, Impact Factor – 1.07,Volume 2023, Article ID 3974346, 11 pages https://doi.org/10.1155/2023/3974346
Rao, D. C. ., Sharma, S. ., Nayak, S. K. ., Srichandan, S. K. ., & Dash, A. . (2023). A Novel Modified and Optimized Meta-Heuristic Load-Balancing Technique for Cloud Computing System . International Journal of Intelligent Systems and Applications in Engineering, 11(9s), 598–611.
Majhi, Santosh Kumar, et al. "Malware image classification: comparative analysis of a fine-tuned CNN and pre-trained models." International Journal of Computers and Applications 45.11 (2023): 709-721.
L. Mohanty, P. Istalkar and B. Biswal (2023) Dynamic aspects of suspended-sediment-concentration recession curves, Journal of Hydrology, Volume 617, Part C, 2023, 129107, ISSN 0022-1694, https://doi.org/10.1016/j.jhydrol.2023.129107
R. L. Sahu, R. R. Dash, and P. K. Pradhan, â€˜Laboratory and field studies on the effect of geoenvironmental factors on the removal of linear alkylbenzene sulfonate during riverbank filtrationâ€™, Arabian Journal of Geosciences, vol. 16, no. 1, pp. 1â€“15, Jan. 2023. https://doi.org/10.1007/s12517-022-11098-y
Bijay Kumar Sa, Rutuparna Panda, and Sanjay Agrawal. "Relevant edge probability-based adaptively weighted active contour for medical image segmentation." International Journal of Imaging Systems and Technology 34, no. 2 (2024): e22993. DOI: 10.1002/ima.22993
Behera S. Analytical Solutions In terms of Solitonic Wave Profiles of Phi-four Equation. Nonlinear Opt Quantum Opt 59, no. 3-4 (2023): 253-261. (ESCI , Scopus, I/F-0.26 )
Behera, S, Mohanty , S, and Virdi, J, S. Analytical solutions and mathematical simulation of traveling wave solutions to fractional order nonlinear equations. Partial Differential Equations in Applied Mathematics 8 (2023): 100535. https://doi.org/10.1016/j.padiff.2023.100535 (Scopus, Cite score-3.4 )
Behera, S., and J. P. Virdi. Generalized soliton solutions to Davey–Stewartson equation. Nonlinear Opt Quantum Opt 57, no. 3-4 (2023): 325-337. (ESCI , Scopus, I/F-0.26 )
Behera, S., and N. H. Aljahdaly. Nonlinear evolution equations and their traveling wave solutions in fluid media by modified analytical method. Pramana 97, no. 3 (2023): 130. https://doi.org/10.1007/s12043-023-02602-4 (SCI, I/F-1.9)
Behera, S., Analysis of travelling wave solutions of two space-time nonlinear fractional differential equations by the first-integral method, Mod. Phys. Lett. B,38 (4) 2350247 , 2023. https://doi.org/10.1142/S0217984923502470 (SCI, I/F--1.8, Cite Score-3.7)
Behera S. Dynamical solutions and quadratic resonance of nonlinear perturbed Schr$ddot{o}$dinger equation, Front Appl Math Stat., 2023;8:1086766. https://doi.org/10.3389/fams.2022.1086766 (ESCI , Scopus, I/F-1.3, Cite Score-1.9 )
Behera S, Virdi JPS, Some more solitary traveling wave solutions of nonlinear evolution equations, Discontinuity Nonlinearity Complex. 2023;12(1):75-85. http://dx.doi.org/10.5890/DNC.2023.03.006 (Scopus, I/F-0.49 )
Behera, S., Virdi, J.P.S., Analytical solutions of some fractional order nonlinear evolution equations by sine-cosine method, Discontinuity Nonlinearity Complex., 11(2) 275-286 (2023). https://doi.org/10.5890/DNC.2023.06.004 (Scopus, I/F-0.49 )
Prediction of flow and thermal criticality of unsteady EMHD second grade fluid through exponentially accelerated vertical porous plate (S. Padhi and I. Nayak), The European Physical Journal Plus, (Springer)
Numerical investigation of unsteady flow and heat transfer of a free convective second grade fluid passing through exponentially accelerated vertical porous plate, (A.K. Rath, I. Nayak, S. Padhi), Multidisciplinary journal of Engineering sciences (MJES)
Variable Viscosity effects on unsteady MHD reactive third grade fluid with symmetric convective cooling within porous Couette device (S. Padhi and I. Nayak), Int. J. of Ambient energy, Taylor and Francies
Shial, Gyanaranjan, Sabita Saho, and Sibarama Panigrahi. "A Nature Inspired Hybrid Partitional Clustering Method Based on Grey Wolf Optimization and JAYA Algorithm." Computer Science 24 (2023).
Shial, Gyanaranjan, Sabita Sahoo, and Sibarama Panigrahi. "An enhanced GWO algorithm with improved explorative search capability for global optimization and data clustering." Applied Artificial Intelligence 37.1 (2023): 2166232.
S. Kurman, S.Kisan, “ An in-depth and contrasting survey of meta-heuristic approaches with classical feature selection techniques specific to cervical cancer”, Knowledge and Information Systems,Springer, https://doi.org/10.1007/s10115-022-01825-y, Volume 65, Issue 5, pp 1881–1934,ISSN: 0219-1377, 20 January, 2023
S.Rout, D.K. Swain and S.Kisan, “ Protein Secondary Structure Prediction and Perceptions of Complexities using Deep Neural Network”, International Journal on Recent and Innovation Trends in Computing and Communication, ISSN: 2321-8169 Volume: 11 Issue: 9, 2023
"Energy-Efficient Forecasting of Temperature Data in Sensor Cloud System Using a Hybrid SVM-ANN Method", Kalyan Das, Satyabrata Das & Sibarama Panigrahi , Wireless Personal Communications, 2023(Springer), (SCI), DOI: https://doi.org/10.1007/s11277-023-10265-y
"Energy Competent Clustering Algorithm for Minimization of Holes in Heterogeneous Wireless Sensor Networks", Chinmaya Ku. Nayak &Â Satyabrata Das, Int. J. of System of Systems Engineering,Â (Scopus), Inderscience(Accepted).
Saha, Munmun, Sanjaya Kumar Panda, and S. Panigrahi. "A modified Brown and Gibson model for cloud service selection." International Journal of Computational Science and Engineering 26, no. 4 (2023): 430-444.
Saha, Munmun, Sanjaya Kumar Panda, S. Panigrahi, and David Taniar. "An efficient composite cloud service model using multi-criteria decision-making techniques." The Journal of Supercomputing, Vol. 79, No. 8, pp. 8754-8788, 2023.
D. Konhar, Ananda Kumar Behera, Suvendu Narayan Mishra & Debasis Mishra (19 Oct 2023), “A Fibonacci Series Motivated Circularly Polarized L-Band Slotted Antenna for GNSS Application”, IETE Journal of Research, DOI: 10.1080/03772063.2023.2269120(SCIE, SCOPUS)
Parida, Prasanta Kumar; Dora, Lingraj; Panda, Rutuparna; Agrawal, Sanjay; , Multi-grade Brain Tumor Classification Using a Modified Convolutional Neural Network, International Conference on Intelligent Systems Design and Applications, Pages 463-473, Springer
Chaudhary, Bhawesh K; Agrawal, Sanjay; Mishro, Pranaba K; Panda, Rutuparna; , An improved Gradient based joint histogram equalization technique for mammogram image contrast enhancement, International Conference on Intelligent Systems Design and Applications, Pages 174-184, Springer
Prusty, Sheetal; Panda, Rutuparna; Dora, Lingraj; Agrawal, Sanjay; , Brain Tumor Segmentation/Detection using Transfer Learning with VGG19, 2023 International Conference on Data Science, Agents & Artificial Intelligence (ICDSAAI), Pages 1-6, IEEE
B.K. Chaudhary, S. Agrawal, P.K. Mishro, L. Dora, S. Mahapatra and R. Panda; , An Adaptive Weighted Error Sensitive Fuzzy Clustering Technique for Mammogram Image Segmentation, International Journal of Computer Information Systems and Industrial Management Applications, Volume 15.0, Pages 189-200, MIR Labs
Dora, Lingraj; Agrawal, Sanjay; Panda, Rutuparna; Pachori, Ram Bilas; , Pathological brain classification using multiple kernel-based deep convolutional neural network, Neural Computing and Applications, Volume 36.0, Number 2, Pages 747-756, Springer London London
Prusty, Sheetal; Dora, Lingraj; Panda, Rutuparna; Agrawal, Sanjay; Abraham, Ajith; , Molecular imaging analysis in cancer using deep learning: a review, Research on Biomedical Engineering, Volume 39.0, Number 4, Pages 1015-1032, Springer International Publishing Cham
Das, Gyanesh; Swain, Monorama; Panda, Rutuparna; Naik, Manoj K; Agrawal, Sanjay; , A non-entropy-based optimal multilevel threshold selection technique for COVID-19 X-ray images using chance-based birds intelligence, Soft Computing, Volume 27.0, Number 24, Pages 18991-19011, Springer Berlin Heidelberg Berlin/Heidelberg
Mahapatra, Sakambhari; Jena, Uma Ranjan; Dash, Sonali; Agrawal, Sanjay; , A modified Coye algorithm for retinal vessel segmentation, International Journal of Computational Vision and Robotics, Volume 13.0, Number 1, Pages 73-90, Inderscience Publishers (IEL)
as, Gyanesh; Panda, Rutuparna; Samantaray, Leena; Agrawal, Sanjay; , A novel segmentation error minimization-based method for multilevel optimal threshold selection using opposition equilibrium optimizer, International Journal of Image and Graphics, Volume 23.0, Number 02, Pages 2350021, World Scientific Publishing Company
Subhadip Pradhan, Samir Kumar Panda,…, Debabrata Dhupal, “Computational approach for structural and thermal behavior of laser-machined microgrooves on alumina ceramic using ANSYS”, Proc IMechE Part E: J Process Mechanical Engineering, 1–12, DOI: 10.1177/09544089231209314.
Pradhan, S. Dhupal, D. “Machining of aluminium nitride ceramic with a hAJM process using SiC abrasives: Experiments and simulation”. Journal of Manufacturing Processes, 95, pp. 68–90.
Dwibedy, S. and Panigrahi, S. K. (2023): Factors affecting the structural performance of geopolymer concrete beam composites. Construction and Building Materials, Elsevier (SCIE, IF-7.693), 409, 134129, https://doi.org/10.1016/j.conbuildmat.2023.134129.
Pradhan, J.; Panda, S.; Dwibedy, S.; Pradhan, P; Panigrahi, S. K. (2023): Production of durable high strength self-compacting geopolymer concrete with GGBFS as a precursor, Journal of Material Cycles and Waste Management, Springer, (SCIE, IF-3.579), https://doi.org/10.1007/s10163-023-01851-0.
Pradhan, J.; Panda, S.; Parhi, S. K.; Pradhan, P.; Panigrahi, S. K. (2023): GGBFS-based Self-Compacting Geopolymer Concrete with Optimized Mix Parameters established on Fresh, Mechanical, and Durability Characteristics. Journal of Materials in Civil Engineering, ASCE, (SCIE, IF-3.651), https://doi.org/10.1061/JMCEE7.MTENG-16669.
Parhi, S. K. and Panigrahi, S. K. (2023): Alkali-silica reaction expansion prediction in concrete using hybrid metaheuristic optimized machine learning algorithms. Asian Journal of Civil Engineering, Springer (Scopus), https://doi.org/10.1007/s42107-023-00799-8.
Parhi, S. K.; Dwibedy, S.; Panda, S.; Panigrahi, S. K. (2023): A comprehensive study on Controlled Low Strength Material. Journal of Building Engineering, Elsevier (SCIE, IF-7.144), 76, 107086, https://doi.org/10.1016/j.jobe.2023.107086.
Oram, E., Dash, P. B., & Naik, B. (2023). Light-gradient boosting machine for identification of osteosarcoma cell type from histological features. In Computational Intelligence in Cancer Diagnosis (pp. 289-303). Academic Press.
Behera P.; Ramakrishna, D. S.; Mohapatra, S.; Lakshmi Praveen, P.; Kothakapu, S.R. Indole Substrates to Carbazole Targets: An Update in the Discovery of an Ideal Synthetic Methodology. Journal of Molecular and Engineering Materials,2023 https://doi.org/10.1142/S225123732440001 (SCIE)
Behera, P.; Ramakrishna, D. S.; Chandrasekhar, M. M.; Kothakapu, S. R. A Concise Review on Recent Advances in Catalytic Asymmetric Hydrogenation. Chirality, 2023, 35, 477–497. https://doi.org/10.1002/chir.23559. (SCIE & SCOPUS)
Veligeti, R.; Anireddy, J. S.; Madhu, R. B.; Bendi, A.; Praveen, P. L.; Ramakrishna, D. S. Solvent-Free Synthesis of Acridone Based Dihydropyrazine Derivatives Using CuFe2O4 Nanoparticles as Heterogeneous Catalyst: Molecular Docking and In-Vitro Studies as Anticancer Agents. Journal of Inorganic and Organometallic Polymers and Materials, 2023, 33, 4039–4051. https://doi.org/10.1007/s10904-023-02638-4. (SCI & SCOPUS)
Shekunti, R. K.; Devarakonda, A. P.; Kothakapu, S. R.; Ramakrishna, D. S. Efficient Green Synthesis of a Potential Novel Nosylation Reagent and Its DFT Study. Phosphorus, Sulfur, and Silicon and the Related Elements, 2023, 198, 549–553. https://doi.org/10.1080/10426507.2023.2191960. (SCI & SCOPUS)
A. Biswal, S. Purohit, J. Pratapsingh, L. Mishra, M. Monalisa, S. B. Biswal, S. K Swain*,"Synergistic Effect of f-MWCNT and Nano Titania on Wound Healing Efficacy of Chitosan Films in Drosophila and Rat Models" ACS Applied Nano Material s(ACS), 6, 24, 23064–23077 (2023) (Impact Factor: 5.9) ISSN: 2574-0970 DOI: https://doi.org/10.1021/acsanm.3c04413
S. Purohit, A. Biswal, L. Mishra, M. Monalisa, S. B. Biswal, S. K Swain* "In vivo Wound Healing in Drosophila Melanogaster and Mouse models: Synergistic Effect of Bovine Serum Albumin and Graphene Quantum Dots" ACS Appl. Bio Mater.(ACS) 6, 12, 5531–5540 (2023) (Impact Factor: 4.7) ISSN: 2576-6422. DOI: https://doi.org/10.1021/acsabm.3c00743
S. K Das, D. Bharatia, B. Parhi, and S K Swain* “Influential factors modulating the dielectric behaviour of transition metal oxide nanocomposites for energy storage applications: A-state-of-the-art review” Journal of Energy Storage, 73, 108930 (Elsevier), (2023). (Impact Factor: 9.4) ISSN: 2352-1538. DOI: https://doi.org/10.1016/j.est.2023.108930.
S. Patra, K. M Sahu, J. Mahanty, and S. K. Swain* “Ex Vivo Glucose Detection in Human Blood Serums with Carbon Quantum Dot-Doped Oleic Acid-Treated Chitosan Nanocomposites” ACS Appl. Bio Mater.(ACS) XXX, XXX?XXX(2023) (Impact Factor: 4.7) ISSN: 2576-6422 https://doi.org/10.1021/acsabm.3c00851
P K Behera, D Sahu, S. K. Swain, P. Mohapatra “Capsule shaped nano silver embedded reduced graphene oxide nanocomposites for sensing of mercury ions” Applied Nanoscience(Springer), 00-00 (2023) (Impact Factor: 3.869) ISSN: 2190-5517https://doi.org/10.1007/s13204-023-02980-6
S. Patra, S. Mishra, B. Parhi, H. Mishra, S. K. Swain* “Role of transition metal nanocomposites in organic reactions: A state of art as an alternative to conventional catalysts” Results in Chemistry (Elsevier), 6 (2023) 101172. (Impact Factor: 2.3) ISSN: 2211-7156 https://doi.org/10.1016/j.rechem.2023.101172
S. K. Swain*, Sk. Nazrul, S. K Das, A. Biswal and L. Behera, “Layered Double Hydroxides bundled Agar-g-PAN/Ag Nanocomposite Films: A Strategy to Improve Thermal, Barrier and Antibacterial Properties” Materials Today Communication, (Elsevier), 37, 107073 (2023). (Impact Factor: 3.8) ISSN: 2352-4928. DOI: https://doi.org/10.1016/j.mtcomm.2023.107073
D. Bharatiya, S. Patra, B. Parhi and S K Swain* “A materials science approach towards bioinspired polymeric nanocomposites: a comprehensive review” International Journal of Polymeric Materials and Polymeric Biomaterials, 72(2), 119-134, (Tylor & Francis), (2023). (Impact Factor: 3.221) ISSN: 0091-4037. DOI: 10.1080/00914037.2021.1990057.
A Biswal, S S Purohit and S. K. Swain* â€œChitosan based composite scaffolds in skin wound repair: A reviewâ€ Journal of Drug Delivery Science and Technology, (Elsevier) 84, 104549(2023) (Impact Factor: 5.062 ) ISSN: 1773-2247 DOI:10.1016/j.jddst.2023.104549.
K. M. Sahu, S. Patra and S. K. Swain* â€œHost-Guest Drug Delivery by Î²-cyclodextrin Assisted Polysaccharide Vehicles: A Review. International Journal of Biological Macromolecules, (Elsevier), 240 124338(1-20) (2023). (Impact Factor: 8.025) ISSN: 1879-0003. DOI:10.1016/j.ijbiomac.2023.124338.
D. Bharatia, B. Parhi, and S K Swain*"Dielectric Study of Nanostructured Ternary Composite Derived from Amalgamated CuO/Ag2O on Graphene Oxide Sheets. Journal of Materials Research (Springer), 38, 3395–3406 (2023). (Impact Factor: 2.7) ISSN: 2044-5326. 10.1557/s43578-023-01068-9
S. Patra, S. S. Purohit and S. K. Swain* In vivo fluorescence non-enzymatic glucose sensing technique for diabetes management by CQDs incorporated dextran nanocomposites in human blood serums. Microchemical Journal, 109,108646(1-10) (Elsevier), (2023). (Impact Factor: 5.304) ISSN: 0026-265X. DOI:10.1016/j.microc.2023.108646.
D. Bharatia, B. Parhi Hemsagar Sahu and S K Swain* Factors influencing the dielectric properties of GO/MO nanocomposites: review, Journal of Materials Science: Materials in Electronics (Springer), (2023). (Impact Factor: 2.779) ISSN: 0957-4522. DOI: 10.1007/s10854-023-09928-0
S. Patra, K. M. Sahu, A A. Reddy and S K Swain* Polymer and Biopolymer Based Nanocomposites for Glucose Sensing, International Journal of Polymeric Materials and Polymeric Biomaterials (Tylor & Francis), (2023). (Impact Factor: 3.221) ISSN: 1563-535X DOI: 10.1080/00914037.2023.2175824.
S. Behera, S. Behera, AK. Barisal, “Dynamic economic emission dispatch including electric vehicles’ demand management and vehicle to grid support considering physical constraints,” Journal of Ambient Intelligence and Humanized Computing. 2023 Jan 30:1-9. (Scopus) DOI: https://doi.org/10.1007/s12652-023-04518-8. ISSN: 1868-5145
Bhawana Deshmukh, Deepak Kumar Lal, and Sandeep Biswal, "A reconstruction based adaptive fault detection scheme for distribution system containing AC microgrid", International Journal of Electrical Power and Energy Systems (Elsevier Publications), Volume 147, 2023. https://doi.org/10.1016/j.ijepes.2022.108801
G. Biswal, N. Behera, R.N. Mohapatra and S.K. Padhan, A pair of Mond–Weir type third order symmetric duality, Journal of Applied Mathematics and Computing, 69 (2023) 3391-3402.
Swagatika Mishra, Punyapriya Mishra, Punyatoya Mishra, Deepak Kumar Mohapatra, Dinesh Kumar Mishra, Krushna Prasad Shadangi, Study of Mechanical and Morphological properties of CCTO-BT/epoxy composite, Composite Theory and Practices, 23(3), 123-128
Sabindra Kachhap, Pabitra Kumar Sahu, Punyapriya Mishra, Investigation and optimization of wire EDM process parameters for Al 5454 alloy machining, Materials today proceeding
Ranjan Pramanik and B. B. Pati,(2023) "Modelling and control of a non-isolated half-bridge bidirectional DC-DC converter with an energy management topology applicable with EV/HEV," J. King Saud Univ. – Eng. Sci., vol. 35, pp. 116–122, 2023, doi: 10.1016/j.jksues.2021.03.004.
Sarada Prasanna Sahoo, Bikramaditya Das, B.B.Pati, Garcia Marquez, F. P., and Segovia Ramirez, I., (2023) “Hybrid pathplanning using a bionic-inspired optimization algorithm for autonomous underwater vehicles”. Journalof Marine Science and Engineering, 11(4), p. 761.(This article belongs to the Special Issue AI for Navigation and Path Planning of Marine Vehicles).https://doi.org/10.3390/jmse11040761.
L. Panigrahi, J.P. Panda, G. C. Dash, “MHD natural convective flow of a polar fluid with Newtonian heat transfer in vertical concentric annuli“,International Journal of Ambient Energy, vol. 43 (1), pp.3410-3417, 2022, doi:10.1080/01430750.2020.1831953, Available: https://doi.org/10.1080/01430750.2020.1831953
L. Panigrahi, J.P. Panda, I. Khan, “Numerical analysis of entropy generation and induced magnetic field on unsteady stagnation flow with suction/injection” ,Numerical Heat Transfer, Part B: Fundamentals, vol.82, no.3-4, 95-111, 2022, doi: 10.1080/10407790.2022.2068863, Available: https://doi.org/10.1080/10407790.2022.2068863
Arjun Agrawal and J.P. Panda, “Soret effect on MHD flow with hall current and induced magnetic field “, International Journal of Ambient Energy, 2022, doi:10.1080/01430750.2022.2128416, Available: https://doi.org/10.1080/01430750.2022.2128416
Manasi Mishra, J.P. Panda, Dileep Kumar and S. S. Sahoo, “Thermal radiation and Soret effects on boundary layer flow past a vertical surface embedded in porous medium with induced magnetic field with reference to Aluminum industry”, Journal of Thermal Analysis and Calorimetry, vol. 147, no.23, pp. 13829 - 13845, 2022,doi: 10.1007/s10973-022-11644-6,
Available: https://doi.org/10.1007/s10973-022-11644-6
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., Somani, N., & Gupta, N. K. (2022). Machine learning-based modeling and optimization in hard turning of AISI D6 steel with advanced AlTiSiN-coated carbide inserts to predict surface roughness and other machining characteristics. Surface Review and Letters, 29(10), 2250137.
Ibrahim, A. M. M., Omer, M. A. E., Das, S. R., Li, W., Alsoufi, M. S., & Elsheikh, A. (2022). Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using nano-additives. Alexandria Engineering Journal, 61(12), 10925–10938.
Babu, M. N., Anandan, V., Yildirim, C. V., Parthasarathi, N. L., & Das, S. R. (2022). Performance analysis in turning of D3 tool steel using silver nanoplatelets under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
Rafighi, M., Özdemir, M., Şahinoğlu, A., Kumar, R., & Das, S. R. (2022). Experimental assessment and TOPSIS optimization in hard turning of AISI 52100 steel. Surface Review and Letters, 29(11), 2250150.
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Surface integrity investigation in hard turning using nanofluid-assisted MQL. Advances in Materials and Processing Technologies, 8(sup3), 1714–1729.
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., & Gupta, N. K. (2022). Machine learning-based modeling in hard turning of AISI D6 steel. Surface Review and Letters, 29(10), 2250137.
Das, A., Das, S. R., Panda, A., & Patel, S. K. (2022). Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2022). Electrical discharge machining of engineered Al–22% SiC metal matrix composite: Surface roughness analysis, optimization, economic analysis, and sustainability assessment. Process Integration and Optimization for Sustainability, 6(2), 223–251.
Rafighi, M., Özdemir, M., Das, A., & Das, S. R. (2022). Machinability investigation of cryogenically treated hardened AISI 4140 alloy steel using CBN insert under sustainable finish dry hard turning. Surface Review and Letters, 29(04), 2250047.
Das, A., Gupta, M. K., Das, S. R., Panda, A., Patel, S. K., & Padhan, S. (2022). Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: Comparative machinability investigation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
Padhan, S., Das, S. R., Das, A., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2022). Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials, 15(7), 2368.
Das, A., Kamal, M., Das, S. R., Patel, S. K., Panda, A., Rafighi, M., & Biswal, B. B. (2022). Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Rout, B., Dash, R., Dhupal, D., & Das, S. R. (2022). Optimized posture prediction for task-specific stacking process using human upper body movements. International Journal on Interactive Design and Manufacturing (IJIDeM), 16(1).
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Behera, R. K., Samal, B. P., Panigrahi, S. C., Das, S. R., Mohamed, A., & Muduli, K. (2022). Experimental analysis on machinability aspects of sintered aluminium metal matrix composite (Al + Si + Mg + Cu + SiC) produced by powder metallurgy method. International Journal of Materials Engineering Innovation, 13(1), 1–22.
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., Somani, N., & Gupta, N. K. (2022). Machine learning-based modeling and optimization in hard turning of AISI D6 steel with advanced AlTiSiN-coated carbide inserts to predict surface roughness and other machining characteristics. Surface Review and Letters, 29(10), 2250137.
Ibrahim, A. M. M., Omer, M. A. E., Das, S. R., Li, W., Alsoufi, M. S., & Elsheikh, A. (2022). Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using nano-additives. Alexandria Engineering Journal, 61(12), 10925–10938.
Babu, M. N., Anandan, V., Yildirim, C. V., Parthasarathi, N. L., & Das, S. R. (2022). Performance analysis in turning of D3 tool steel using silver nanoplatelets under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
Rafighi, M., Özdemir, M., Şahinoğlu, A., Kumar, R., & Das, S. R. (2022). Experimental assessment and TOPSIS optimization in hard turning of AISI 52100 steel. Surface Review and Letters, 29(11), 2250150.
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Surface integrity investigation in hard turning using nanofluid-assisted MQL. Advances in Materials and Processing Technologies, 8(sup3), 1714–1729.
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., & Gupta, N. K. (2022). Machine learning-based modeling in hard turning of AISI D6 steel. Surface Review and Letters, 29(10), 2250137.
Das, A., Das, S. R., Panda, A., & Patel, S. K. (2022). Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2022). Electrical discharge machining of engineered Al–22% SiC metal matrix composite: Surface roughness analysis, optimization, economic analysis, and sustainability assessment. Process Integration and Optimization for Sustainability, 6(2), 223–251.
Rafighi, M., Özdemir, M., Das, A., & Das, S. R. (2022). Machinability investigation of cryogenically treated hardened AISI 4140 alloy steel using CBN insert under sustainable finish dry hard turning. Surface Review and Letters, 29(04), 2250047.
Das, A., Gupta, M. K., Das, S. R., Panda, A., Patel, S. K., & Padhan, S. (2022). Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: Comparative machinability investigation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
Padhan, S., Das, S. R., Das, A., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2022). Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials, 15(7), 2368.
Das, A., Kamal, M., Das, S. R., Patel, S. K., Panda, A., Rafighi, M., & Biswal, B. B. (2022). Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Rout, B., Dash, R., Dhupal, D., & Das, S. R. (2022). Optimized posture prediction for task-specific stacking process using human upper body movements. International Journal on Interactive Design and Manufacturing (IJIDeM), 16(1).
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Behera, R. K., Samal, B. P., Panigrahi, S. C., Das, S. R., Mohamed, A., & Muduli, K. (2022). Experimental analysis on machinability aspects of sintered aluminium metal matrix composite (Al + Si + Mg + Cu + SiC) produced by powder metallurgy method. International Journal of Materials Engineering Innovation, 13(1), 1–22.
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., Somani, N., & Gupta, N. K. (2022). Machine learning-based modeling and optimization in hard turning of AISI D6 steel with advanced AlTiSiN-coated carbide inserts to predict surface roughness and other machining characteristics. Surface Review and Letters, 29(10), 2250137.
Ibrahim, A. M. M., Omer, M. A. E., Das, S. R., Li, W., Alsoufi, M. S., & Elsheikh, A. (2022). Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using nano-additives. Alexandria Engineering Journal, 61(12), 10925–10938.
Babu, M. N., Anandan, V., Yildirim, C. V., Parthasarathi, N. L., & Das, S. R. (2022). Performance analysis in turning of D3 tool steel using silver nanoplatelets under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
Rafighi, M., Özdemir, M., Şahinoğlu, A., Kumar, R., & Das, S. R. (2022). Experimental assessment and TOPSIS optimization in hard turning of AISI 52100 steel. Surface Review and Letters, 29(11), 2250150.
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Surface integrity investigation in hard turning using nanofluid-assisted MQL. Advances in Materials and Processing Technologies, 8(sup3), 1714–1729.
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., & Gupta, N. K. (2022). Machine learning-based modeling in hard turning of AISI D6 steel. Surface Review and Letters, 29(10), 2250137.
Das, A., Das, S. R., Panda, A., & Patel, S. K. (2022). Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2022). Electrical discharge machining of engineered Al–22% SiC metal matrix composite: Surface roughness analysis, optimization, economic analysis, and sustainability assessment. Process Integration and Optimization for Sustainability, 6(2), 223–251.
Rafighi, M., Özdemir, M., Das, A., & Das, S. R. (2022). Machinability investigation of cryogenically treated hardened AISI 4140 alloy steel using CBN insert under sustainable finish dry hard turning. Surface Review and Letters, 29(04), 2250047.
Das, A., Gupta, M. K., Das, S. R., Panda, A., Patel, S. K., & Padhan, S. (2022). Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: Comparative machinability investigation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
Padhan, S., Das, S. R., Das, A., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2022). Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials, 15(7), 2368.
Das, A., Kamal, M., Das, S. R., Patel, S. K., Panda, A., Rafighi, M., & Biswal, B. B. (2022). Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Rout, B., Dash, R., Dhupal, D., & Das, S. R. (2022). Optimized posture prediction for task-specific stacking process using human upper body movements. International Journal on Interactive Design and Manufacturing (IJIDeM), 16(1).
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Behera, R. K., Samal, B. P., Panigrahi, S. C., Das, S. R., Mohamed, A., & Muduli, K. (2022). Experimental analysis on machinability aspects of sintered aluminium metal matrix composite (Al + Si + Mg + Cu + SiC) produced by powder metallurgy method. International Journal of Materials Engineering Innovation, 13(1), 1–22.
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., Somani, N., & Gupta, N. K. (2022). Machine learning-based modeling and optimization in hard turning of AISI D6 steel with advanced AlTiSiN-coated carbide inserts to predict surface roughness and other machining characteristics. Surface Review and Letters, 29(10), 2250137.
Ibrahim, A. M. M., Omer, M. A. E., Das, S. R., Li, W., Alsoufi, M. S., & Elsheikh, A. (2022). Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using nano-additives. Alexandria Engineering Journal, 61(12), 10925–10938.
Babu, M. N., Anandan, V., Yildirim, C. V., Parthasarathi, N. L., & Das, S. R. (2022). Performance analysis in turning of D3 tool steel using silver nanoplatelets under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
Rafighi, M., Özdemir, M., Şahinoğlu, A., Kumar, R., & Das, S. R. (2022). Experimental assessment and TOPSIS optimization in hard turning of AISI 52100 steel. Surface Review and Letters, 29(11), 2250150.
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Surface integrity investigation in hard turning using nanofluid-assisted MQL. Advances in Materials and Processing Technologies, 8(sup3), 1714–1729.
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., & Gupta, N. K. (2022). Machine learning-based modeling in hard turning of AISI D6 steel. Surface Review and Letters, 29(10), 2250137.
Das, A., Das, S. R., Panda, A., & Patel, S. K. (2022). Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2022). Electrical discharge machining of engineered Al–22% SiC metal matrix composite: Surface roughness analysis, optimization, economic analysis, and sustainability assessment. Process Integration and Optimization for Sustainability, 6(2), 223–251.
Rafighi, M., Özdemir, M., Das, A., & Das, S. R. (2022). Machinability investigation of cryogenically treated hardened AISI 4140 alloy steel using CBN insert under sustainable finish dry hard turning. Surface Review and Letters, 29(04), 2250047.
Das, A., Gupta, M. K., Das, S. R., Panda, A., Patel, S. K., & Padhan, S. (2022). Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: Comparative machinability investigation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
Padhan, S., Das, S. R., Das, A., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2022). Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials, 15(7), 2368.
Das, A., Kamal, M., Das, S. R., Patel, S. K., Panda, A., Rafighi, M., & Biswal, B. B. (2022). Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Rout, B., Dash, R., Dhupal, D., & Das, S. R. (2022). Optimized posture prediction for task-specific stacking process using human upper body movements. International Journal on Interactive Design and Manufacturing (IJIDeM), 16(1).
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Behera, R. K., Samal, B. P., Panigrahi, S. C., Das, S. R., Mohamed, A., & Muduli, K. (2022). Experimental analysis on machinability aspects of sintered aluminium metal matrix composite (Al + Si + Mg + Cu + SiC) produced by powder metallurgy method. International Journal of Materials Engineering Innovation, 13(1), 1–22.
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., Somani, N., & Gupta, N. K. (2022). Machine learning-based modeling and optimization in hard turning of AISI D6 steel with advanced AlTiSiN-coated carbide inserts to predict surface roughness and other machining characteristics. Surface Review and Letters, 29(10), 2250137.
Ibrahim, A. M. M., Omer, M. A. E., Das, S. R., Li, W., Alsoufi, M. S., & Elsheikh, A. (2022). Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using nano-additives. Alexandria Engineering Journal, 61(12), 10925–10938.
Babu, M. N., Anandan, V., Yildirim, C. V., Parthasarathi, N. L., & Das, S. R. (2022). Performance analysis in turning of D3 tool steel using silver nanoplatelets under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
Rafighi, M., Özdemir, M., Şahinoğlu, A., Kumar, R., & Das, S. R. (2022). Experimental assessment and TOPSIS optimization in hard turning of AISI 52100 steel. Surface Review and Letters, 29(11), 2250150.
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Surface integrity investigation in hard turning using nanofluid-assisted MQL. Advances in Materials and Processing Technologies, 8(sup3), 1714–1729.
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., & Gupta, N. K. (2022). Machine learning-based modeling in hard turning of AISI D6 steel. Surface Review and Letters, 29(10), 2250137.
Das, A., Das, S. R., Panda, A., & Patel, S. K. (2022). Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2022). Electrical discharge machining of engineered Al–22% SiC metal matrix composite: Surface roughness analysis, optimization, economic analysis, and sustainability assessment. Process Integration and Optimization for Sustainability, 6(2), 223–251.
Rafighi, M., Özdemir, M., Das, A., & Das, S. R. (2022). Machinability investigation of cryogenically treated hardened AISI 4140 alloy steel using CBN insert under sustainable finish dry hard turning. Surface Review and Letters, 29(04), 2250047.
Das, A., Gupta, M. K., Das, S. R., Panda, A., Patel, S. K., & Padhan, S. (2022). Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: Comparative machinability investigation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
Padhan, S., Das, S. R., Das, A., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2022). Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials, 15(7), 2368.
Das, A., Kamal, M., Das, S. R., Patel, S. K., Panda, A., Rafighi, M., & Biswal, B. B. (2022). Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Rout, B., Dash, R., Dhupal, D., & Das, S. R. (2022). Optimized posture prediction for task-specific stacking process using human upper body movements. International Journal on Interactive Design and Manufacturing (IJIDeM), 16(1).
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Behera, R. K., Samal, B. P., Panigrahi, S. C., Das, S. R., Mohamed, A., & Muduli, K. (2022). Experimental analysis on machinability aspects of sintered aluminium metal matrix composite (Al + Si + Mg + Cu + SiC) produced by powder metallurgy method. International Journal of Materials Engineering Innovation, 13(1), 1–22.
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., Somani, N., & Gupta, N. K. (2022). Machine learning-based modeling and optimization in hard turning of AISI D6 steel with advanced AlTiSiN-coated carbide inserts to predict surface roughness and other machining characteristics. Surface Review and Letters, 29(10), 2250137.
Ibrahim, A. M. M., Omer, M. A. E., Das, S. R., Li, W., Alsoufi, M. S., & Elsheikh, A. (2022). Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using nano-additives. Alexandria Engineering Journal, 61(12), 10925–10938.
Babu, M. N., Anandan, V., Yildirim, C. V., Parthasarathi, N. L., & Das, S. R. (2022). Performance analysis in turning of D3 tool steel using silver nanoplatelets under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
Rafighi, M., Özdemir, M., Şahinoğlu, A., Kumar, R., & Das, S. R. (2022). Experimental assessment and TOPSIS optimization in hard turning of AISI 52100 steel. Surface Review and Letters, 29(11), 2250150.
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Surface integrity investigation in hard turning using nanofluid-assisted MQL. Advances in Materials and Processing Technologies, 8(sup3), 1714–1729.
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., & Gupta, N. K. (2022). Machine learning-based modeling in hard turning of AISI D6 steel. Surface Review and Letters, 29(10), 2250137.
Das, A., Das, S. R., Panda, A., & Patel, S. K. (2022). Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2022). Electrical discharge machining of engineered Al–22% SiC metal matrix composite: Surface roughness analysis, optimization, economic analysis, and sustainability assessment. Process Integration and Optimization for Sustainability, 6(2), 223–251.
Rafighi, M., Özdemir, M., Das, A., & Das, S. R. (2022). Machinability investigation of cryogenically treated hardened AISI 4140 alloy steel using CBN insert under sustainable finish dry hard turning. Surface Review and Letters, 29(04), 2250047.
Das, A., Gupta, M. K., Das, S. R., Panda, A., Patel, S. K., & Padhan, S. (2022). Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: Comparative machinability investigation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
Padhan, S., Das, S. R., Das, A., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2022). Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials, 15(7), 2368.
Das, A., Kamal, M., Das, S. R., Patel, S. K., Panda, A., Rafighi, M., & Biswal, B. B. (2022). Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Rout, B., Dash, R., Dhupal, D., & Das, S. R. (2022). Optimized posture prediction for task-specific stacking process using human upper body movements. International Journal on Interactive Design and Manufacturing (IJIDeM), 16(1).
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Behera, R. K., Samal, B. P., Panigrahi, S. C., Das, S. R., Mohamed, A., & Muduli, K. (2022). Experimental analysis on machinability aspects of sintered aluminium metal matrix composite (Al + Si + Mg + Cu + SiC) produced by powder metallurgy method. International Journal of Materials Engineering Innovation, 13(1), 1–22.
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., Somani, N., & Gupta, N. K. (2022). Machine learning-based modeling and optimization in hard turning of AISI D6 steel with advanced AlTiSiN-coated carbide inserts to predict surface roughness and other machining characteristics. Surface Review and Letters, 29(10), 2250137.
Ibrahim, A. M. M., Omer, M. A. E., Das, S. R., Li, W., Alsoufi, M. S., & Elsheikh, A. (2022). Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using nano-additives. Alexandria Engineering Journal, 61(12), 10925–10938.
Babu, M. N., Anandan, V., Yildirim, C. V., Parthasarathi, N. L., & Das, S. R. (2022). Performance analysis in turning of D3 tool steel using silver nanoplatelets under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
Rafighi, M., Özdemir, M., Şahinoğlu, A., Kumar, R., & Das, S. R. (2022). Experimental assessment and TOPSIS optimization in hard turning of AISI 52100 steel. Surface Review and Letters, 29(11), 2250150.
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Surface integrity investigation in hard turning using nanofluid-assisted MQL. Advances in Materials and Processing Technologies, 8(sup3), 1714–1729.
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., & Gupta, N. K. (2022). Machine learning-based modeling in hard turning of AISI D6 steel. Surface Review and Letters, 29(10), 2250137.
Das, A., Das, S. R., Panda, A., & Patel, S. K. (2022). Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2022). Electrical discharge machining of engineered Al–22% SiC metal matrix composite: Surface roughness analysis, optimization, economic analysis, and sustainability assessment. Process Integration and Optimization for Sustainability, 6(2), 223–251.
Rafighi, M., Özdemir, M., Das, A., & Das, S. R. (2022). Machinability investigation of cryogenically treated hardened AISI 4140 alloy steel using CBN insert under sustainable finish dry hard turning. Surface Review and Letters, 29(04), 2250047.
Das, A., Gupta, M. K., Das, S. R., Panda, A., Patel, S. K., & Padhan, S. (2022). Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: Comparative machinability investigation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
Padhan, S., Das, S. R., Das, A., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2022). Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials, 15(7), 2368.
Das, A., Kamal, M., Das, S. R., Patel, S. K., Panda, A., Rafighi, M., & Biswal, B. B. (2022). Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Rout, B., Dash, R., Dhupal, D., & Das, S. R. (2022). Optimized posture prediction for task-specific stacking process using human upper body movements. International Journal on Interactive Design and Manufacturing (IJIDeM), 16(1).
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Behera, R. K., Samal, B. P., Panigrahi, S. C., Das, S. R., Mohamed, A., & Muduli, K. (2022). Experimental analysis on machinability aspects of sintered aluminium metal matrix composite (Al + Si + Mg + Cu + SiC) produced by powder metallurgy method. International Journal of Materials Engineering Innovation, 13(1), 1–22.
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., Somani, N., & Gupta, N. K. (2022). Machine learning-based modeling and optimization in hard turning of AISI D6 steel with advanced AlTiSiN-coated carbide inserts to predict surface roughness and other machining characteristics. Surface Review and Letters, 29(10), 2250137.
Ibrahim, A. M. M., Omer, M. A. E., Das, S. R., Li, W., Alsoufi, M. S., & Elsheikh, A. (2022). Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using nano-additives. Alexandria Engineering Journal, 61(12), 10925–10938.
Babu, M. N., Anandan, V., Yildirim, C. V., Parthasarathi, N. L., & Das, S. R. (2022). Performance analysis in turning of D3 tool steel using silver nanoplatelets under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
Rafighi, M., Özdemir, M., Şahinoğlu, A., Kumar, R., & Das, S. R. (2022). Experimental assessment and TOPSIS optimization in hard turning of AISI 52100 steel. Surface Review and Letters, 29(11), 2250150.
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Surface integrity investigation in hard turning using nanofluid-assisted MQL. Advances in Materials and Processing Technologies, 8(sup3), 1714–1729.
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., & Gupta, N. K. (2022). Machine learning-based modeling in hard turning of AISI D6 steel. Surface Review and Letters, 29(10), 2250137.
Das, A., Das, S. R., Panda, A., & Patel, S. K. (2022). Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2022). Electrical discharge machining of engineered Al–22% SiC metal matrix composite: Surface roughness analysis, optimization, economic analysis, and sustainability assessment. Process Integration and Optimization for Sustainability, 6(2), 223–251.
Rafighi, M., Özdemir, M., Das, A., & Das, S. R. (2022). Machinability investigation of cryogenically treated hardened AISI 4140 alloy steel using CBN insert under sustainable finish dry hard turning. Surface Review and Letters, 29(04), 2250047.
Das, A., Gupta, M. K., Das, S. R., Panda, A., Patel, S. K., & Padhan, S. (2022). Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: Comparative machinability investigation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
Padhan, S., Das, S. R., Das, A., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2022). Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials, 15(7), 2368.
Das, A., Kamal, M., Das, S. R., Patel, S. K., Panda, A., Rafighi, M., & Biswal, B. B. (2022). Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Rout, B., Dash, R., Dhupal, D., & Das, S. R. (2022). Optimized posture prediction for task-specific stacking process using human upper body movements. International Journal on Interactive Design and Manufacturing (IJIDeM), 16(1).
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Behera, R. K., Samal, B. P., Panigrahi, S. C., Das, S. R., Mohamed, A., & Muduli, K. (2022). Experimental analysis on machinability aspects of sintered aluminium metal matrix composite (Al + Si + Mg + Cu + SiC) produced by powder metallurgy method. International Journal of Materials Engineering Innovation, 13(1), 1–22.
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., Somani, N., & Gupta, N. K. (2022). Machine learning-based modeling and optimization in hard turning of AISI D6 steel with advanced AlTiSiN-coated carbide inserts to predict surface roughness and other machining characteristics. Surface Review and Letters, 29(10), 2250137.
Ibrahim, A. M. M., Omer, M. A. E., Das, S. R., Li, W., Alsoufi, M. S., & Elsheikh, A. (2022). Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using nano-additives. Alexandria Engineering Journal, 61(12), 10925–10938.
Babu, M. N., Anandan, V., Yildirim, C. V., Parthasarathi, N. L., & Das, S. R. (2022). Performance analysis in turning of D3 tool steel using silver nanoplatelets under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
Rafighi, M., Özdemir, M., Şahinoğlu, A., Kumar, R., & Das, S. R. (2022). Experimental assessment and TOPSIS optimization in hard turning of AISI 52100 steel. Surface Review and Letters, 29(11), 2250150.
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Surface integrity investigation in hard turning using nanofluid-assisted MQL. Advances in Materials and Processing Technologies, 8(sup3), 1714–1729.
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., & Gupta, N. K. (2022). Machine learning-based modeling in hard turning of AISI D6 steel. Surface Review and Letters, 29(10), 2250137.
Das, A., Das, S. R., Panda, A., & Patel, S. K. (2022). Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2022). Electrical discharge machining of engineered Al–22% SiC metal matrix composite: Surface roughness analysis, optimization, economic analysis, and sustainability assessment. Process Integration and Optimization for Sustainability, 6(2), 223–251.
Rafighi, M., Özdemir, M., Das, A., & Das, S. R. (2022). Machinability investigation of cryogenically treated hardened AISI 4140 alloy steel using CBN insert under sustainable finish dry hard turning. Surface Review and Letters, 29(04), 2250047.
Das, A., Gupta, M. K., Das, S. R., Panda, A., Patel, S. K., & Padhan, S. (2022). Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: Comparative machinability investigation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
Padhan, S., Das, S. R., Das, A., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2022). Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials, 15(7), 2368.
Das, A., Kamal, M., Das, S. R., Patel, S. K., Panda, A., Rafighi, M., & Biswal, B. B. (2022). Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Rout, B., Dash, R., Dhupal, D., & Das, S. R. (2022). Optimized posture prediction for task-specific stacking process using human upper body movements. International Journal on Interactive Design and Manufacturing (IJIDeM), 16(1).
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Behera, R. K., Samal, B. P., Panigrahi, S. C., Das, S. R., Mohamed, A., & Muduli, K. (2022). Experimental analysis on machinability aspects of sintered aluminium metal matrix composite (Al + Si + Mg + Cu + SiC) produced by powder metallurgy method. International Journal of Materials Engineering Innovation, 13(1), 1–22.
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., Somani, N., & Gupta, N. K. (2022). Machine learning-based modeling and optimization in hard turning of AISI D6 steel with advanced AlTiSiN-coated carbide inserts to predict surface roughness and other machining characteristics. Surface Review and Letters, 29(10), 2250137.
Ibrahim, A. M. M., Omer, M. A. E., Das, S. R., Li, W., Alsoufi, M. S., & Elsheikh, A. (2022). Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using nano-additives. Alexandria Engineering Journal, 61(12), 10925–10938.
Babu, M. N., Anandan, V., Yildirim, C. V., Parthasarathi, N. L., & Das, S. R. (2022). Performance analysis in turning of D3 tool steel using silver nanoplatelets under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
Rafighi, M., Özdemir, M., Şahinoğlu, A., Kumar, R., & Das, S. R. (2022). Experimental assessment and TOPSIS optimization in hard turning of AISI 52100 steel. Surface Review and Letters, 29(11), 2250150.
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Surface integrity investigation in hard turning using nanofluid-assisted MQL. Advances in Materials and Processing Technologies, 8(sup3), 1714–1729.
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., & Gupta, N. K. (2022). Machine learning-based modeling in hard turning of AISI D6 steel. Surface Review and Letters, 29(10), 2250137.
Das, A., Das, S. R., Panda, A., & Patel, S. K. (2022). Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2022). Electrical discharge machining of engineered Al–22% SiC metal matrix composite: Surface roughness analysis, optimization, economic analysis, and sustainability assessment. Process Integration and Optimization for Sustainability, 6(2), 223–251.
Rafighi, M., Özdemir, M., Das, A., & Das, S. R. (2022). Machinability investigation of cryogenically treated hardened AISI 4140 alloy steel using CBN insert under sustainable finish dry hard turning. Surface Review and Letters, 29(04), 2250047.
Das, A., Gupta, M. K., Das, S. R., Panda, A., Patel, S. K., & Padhan, S. (2022). Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: Comparative machinability investigation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
Padhan, S., Das, S. R., Das, A., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2022). Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials, 15(7), 2368.
Das, A., Kamal, M., Das, S. R., Patel, S. K., Panda, A., Rafighi, M., & Biswal, B. B. (2022). Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Rout, B., Dash, R., Dhupal, D., & Das, S. R. (2022). Optimized posture prediction for task-specific stacking process using human upper body movements. International Journal on Interactive Design and Manufacturing (IJIDeM), 16(1).
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Behera, R. K., Samal, B. P., Panigrahi, S. C., Das, S. R., Mohamed, A., & Muduli, K. (2022). Experimental analysis on machinability aspects of sintered aluminium metal matrix composite (Al + Si + Mg + Cu + SiC) produced by powder metallurgy method. International Journal of Materials Engineering Innovation, 13(1), 1–22.
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., Somani, N., & Gupta, N. K. (2022). Machine learning-based modeling and optimization in hard turning of AISI D6 steel with advanced AlTiSiN-coated carbide inserts to predict surface roughness and other machining characteristics. Surface Review and Letters, 29(10), 2250137.
Ibrahim, A. M. M., Omer, M. A. E., Das, S. R., Li, W., Alsoufi, M. S., & Elsheikh, A. (2022). Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using nano-additives. Alexandria Engineering Journal, 61(12), 10925–10938.
Babu, M. N., Anandan, V., Yildirim, C. V., Parthasarathi, N. L., & Das, S. R. (2022). Performance analysis in turning of D3 tool steel using silver nanoplatelets under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
Rafighi, M., Özdemir, M., Şahinoğlu, A., Kumar, R., & Das, S. R. (2022). Experimental assessment and TOPSIS optimization in hard turning of AISI 52100 steel. Surface Review and Letters, 29(11), 2250150.
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Surface integrity investigation in hard turning using nanofluid-assisted MQL. Advances in Materials and Processing Technologies, 8(sup3), 1714–1729.
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., & Gupta, N. K. (2022). Machine learning-based modeling in hard turning of AISI D6 steel. Surface Review and Letters, 29(10), 2250137.
Das, A., Das, S. R., Panda, A., & Patel, S. K. (2022). Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2022). Electrical discharge machining of engineered Al–22% SiC metal matrix composite: Surface roughness analysis, optimization, economic analysis, and sustainability assessment. Process Integration and Optimization for Sustainability, 6(2), 223–251.
Rafighi, M., Özdemir, M., Das, A., & Das, S. R. (2022). Machinability investigation of cryogenically treated hardened AISI 4140 alloy steel using CBN insert under sustainable finish dry hard turning. Surface Review and Letters, 29(04), 2250047.
Das, A., Gupta, M. K., Das, S. R., Panda, A., Patel, S. K., & Padhan, S. (2022). Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: Comparative machinability investigation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
Padhan, S., Das, S. R., Das, A., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2022). Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials, 15(7), 2368.
Das, A., Kamal, M., Das, S. R., Patel, S. K., Panda, A., Rafighi, M., & Biswal, B. B. (2022). Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Rout, B., Dash, R., Dhupal, D., & Das, S. R. (2022). Optimized posture prediction for task-specific stacking process using human upper body movements. International Journal on Interactive Design and Manufacturing (IJIDeM), 16(1).
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Behera, R. K., Samal, B. P., Panigrahi, S. C., Das, S. R., Mohamed, A., & Muduli, K. (2022). Experimental analysis on machinability aspects of sintered aluminium metal matrix composite (Al + Si + Mg + Cu + SiC) produced by powder metallurgy method. International Journal of Materials Engineering Innovation, 13(1), 1–22.
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., Somani, N., & Gupta, N. K. (2022). Machine learning-based modeling and optimization in hard turning of AISI D6 steel with advanced AlTiSiN-coated carbide inserts to predict surface roughness and other machining characteristics. Surface Review and Letters, 29(10), 2250137.
Ibrahim, A. M. M., Omer, M. A. E., Das, S. R., Li, W., Alsoufi, M. S., & Elsheikh, A. (2022). Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using nano-additives. Alexandria Engineering Journal, 61(12), 10925–10938.
Babu, M. N., Anandan, V., Yildirim, C. V., Parthasarathi, N. L., & Das, S. R. (2022). Performance analysis in turning of D3 tool steel using silver nanoplatelets under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
Rafighi, M., Özdemir, M., Şahinoğlu, A., Kumar, R., & Das, S. R. (2022). Experimental assessment and TOPSIS optimization in hard turning of AISI 52100 steel. Surface Review and Letters, 29(11), 2250150.
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Surface integrity investigation in hard turning using nanofluid-assisted MQL. Advances in Materials and Processing Technologies, 8(sup3), 1714–1729.
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., & Gupta, N. K. (2022). Machine learning-based modeling in hard turning of AISI D6 steel. Surface Review and Letters, 29(10), 2250137.
Das, A., Das, S. R., Panda, A., & Patel, S. K. (2022). Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2022). Electrical discharge machining of engineered Al–22% SiC metal matrix composite: Surface roughness analysis, optimization, economic analysis, and sustainability assessment. Process Integration and Optimization for Sustainability, 6(2), 223–251.
Rafighi, M., Özdemir, M., Das, A., & Das, S. R. (2022). Machinability investigation of cryogenically treated hardened AISI 4140 alloy steel using CBN insert under sustainable finish dry hard turning. Surface Review and Letters, 29(04), 2250047.
Das, A., Gupta, M. K., Das, S. R., Panda, A., Patel, S. K., & Padhan, S. (2022). Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: Comparative machinability investigation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
Padhan, S., Das, S. R., Das, A., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2022). Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials, 15(7), 2368.
Das, A., Kamal, M., Das, S. R., Patel, S. K., Panda, A., Rafighi, M., & Biswal, B. B. (2022). Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Rout, B., Dash, R., Dhupal, D., & Das, S. R. (2022). Optimized posture prediction for task-specific stacking process using human upper body movements. International Journal on Interactive Design and Manufacturing (IJIDeM), 16(1).
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Behera, R. K., Samal, B. P., Panigrahi, S. C., Das, S. R., Mohamed, A., & Muduli, K. (2022). Experimental analysis on machinability aspects of sintered aluminium metal matrix composite (Al + Si + Mg + Cu + SiC) produced by powder metallurgy method. International Journal of Materials Engineering Innovation, 13(1), 1–22.
Deepak K Mohapatra, Chitta R Deo, Punyapriya Mishra, Kiran K Ekka, Chandrakanta Mishra, “Mechanical characterization of kenaf/glass fibre hybrid composite laminates: An experimental and numerical approach”, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089221136813
Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, “Investigation of glass fiber influence on mechanical characteristics of natural fiber reinforced polyester composites: an experimental and numerical approach”, Composites theory and practice, 22: 3, 123-129
Swagatika Mishra, Punyapriya Mishra, “ Synthesis and characterization of CCTO0.5 BT0.5/epoxy hybrid ceramic polymer composite for electronic applications” Materials Today: Proceedings, Volume 67, Part 2, Pages 372-376
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., Somani, N., & Gupta, N. K. (2022). Machine learning-based modeling and optimization in hard turning of AISI D6 steel with advanced AlTiSiN-coated carbide inserts to predict surface roughness and other machining characteristics. Surface Review and Letters, 29(10), 2250137.
Ibrahim, A. M. M., Omer, M. A. E., Das, S. R., Li, W., Alsoufi, M. S., & Elsheikh, A. (2022). Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using nano-additives. Alexandria Engineering Journal, 61(12), 10925–10938.
Babu, M. N., Anandan, V., Yildirim, C. V., Parthasarathi, N. L., & Das, S. R. (2022). Performance analysis in turning of D3 tool steel using silver nanoplatelets under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
Rafighi, M., Özdemir, M., Şahinoğlu, A., Kumar, R., & Das, S. R. (2022). Experimental assessment and TOPSIS optimization in hard turning of AISI 52100 steel. Surface Review and Letters, 29(11), 2250150.
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Surface integrity investigation in hard turning using nanofluid-assisted MQL. Advances in Materials and Processing Technologies, 8(sup3), 1714–1729.
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., & Gupta, N. K. (2022). Machine learning-based modeling in hard turning of AISI D6 steel. Surface Review and Letters, 29(10), 2250137.
Das, A., Das, S. R., Panda, A., & Patel, S. K. (2022). Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2022). Electrical discharge machining of engineered Al–22% SiC metal matrix composite: Surface roughness analysis, optimization, economic analysis, and sustainability assessment. Process Integration and Optimization for Sustainability, 6(2), 223–251.
Rafighi, M., Özdemir, M., Das, A., & Das, S. R. (2022). Machinability investigation of cryogenically treated hardened AISI 4140 alloy steel using CBN insert under sustainable finish dry hard turning. Surface Review and Letters, 29(04), 2250047.
Das, A., Gupta, M. K., Das, S. R., Panda, A., Patel, S. K., & Padhan, S. (2022). Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: Comparative machinability investigation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
Padhan, S., Das, S. R., Das, A., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2022). Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials, 15(7), 2368.
Das, A., Kamal, M., Das, S. R., Patel, S. K., Panda, A., Rafighi, M., & Biswal, B. B. (2022). Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Rout, B., Dash, R., Dhupal, D., & Das, S. R. (2022). Optimized posture prediction for task-specific stacking process using human upper body movements. International Journal on Interactive Design and Manufacturing (IJIDeM), 16(1).
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Behera, R. K., Samal, B. P., Panigrahi, S. C., Das, S. R., Mohamed, A., & Muduli, K. (2022). Experimental analysis on machinability aspects of sintered aluminium metal matrix composite (Al + Si + Mg + Cu + SiC) produced by powder metallurgy method. International Journal of Materials Engineering Innovation, 13(1), 1–22.
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., Somani, N., & Gupta, N. K. (2022). Machine learning-based modeling and optimization in hard turning of AISI D6 steel with advanced AlTiSiN-coated carbide inserts to predict surface roughness and other machining characteristics. Surface Review and Letters, 29(10), 2250137.
Ibrahim, A. M. M., Omer, M. A. E., Das, S. R., Li, W., Alsoufi, M. S., & Elsheikh, A. (2022). Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using nano-additives. Alexandria Engineering Journal, 61(12), 10925–10938.
Babu, M. N., Anandan, V., Yildirim, C. V., Parthasarathi, N. L., & Das, S. R. (2022). Performance analysis in turning of D3 tool steel using silver nanoplatelets under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
Rafighi, M., Özdemir, M., Şahinoğlu, A., Kumar, R., & Das, S. R. (2022). Experimental assessment and TOPSIS optimization in hard turning of AISI 52100 steel. Surface Review and Letters, 29(11), 2250150.
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Surface integrity investigation in hard turning using nanofluid-assisted MQL. Advances in Materials and Processing Technologies, 8(sup3), 1714–1729.
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., & Gupta, N. K. (2022). Machine learning-based modeling in hard turning of AISI D6 steel. Surface Review and Letters, 29(10), 2250137.
Das, A., Das, S. R., Panda, A., & Patel, S. K. (2022). Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2022). Electrical discharge machining of engineered Al–22% SiC metal matrix composite: Surface roughness analysis, optimization, economic analysis, and sustainability assessment. Process Integration and Optimization for Sustainability, 6(2), 223–251.
Rafighi, M., Özdemir, M., Das, A., & Das, S. R. (2022). Machinability investigation of cryogenically treated hardened AISI 4140 alloy steel using CBN insert under sustainable finish dry hard turning. Surface Review and Letters, 29(04), 2250047.
Das, A., Gupta, M. K., Das, S. R., Panda, A., Patel, S. K., & Padhan, S. (2022). Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: Comparative machinability investigation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
Padhan, S., Das, S. R., Das, A., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2022). Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials, 15(7), 2368.
Das, A., Kamal, M., Das, S. R., Patel, S. K., Panda, A., Rafighi, M., & Biswal, B. B. (2022). Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Rout, B., Dash, R., Dhupal, D., & Das, S. R. (2022). Optimized posture prediction for task-specific stacking process using human upper body movements. International Journal on Interactive Design and Manufacturing (IJIDeM), 16(1).
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Behera, R. K., Samal, B. P., Panigrahi, S. C., Das, S. R., Mohamed, A., & Muduli, K. (2022). Experimental analysis on machinability aspects of sintered aluminium metal matrix composite (Al + Si + Mg + Cu + SiC) produced by powder metallurgy method. International Journal of Materials Engineering Innovation, 13(1), 1–22.
41. Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., Somani, N., & Gupta, N. K. (2022). Machine learning-based modeling and optimization in hard turning of AISI D6 steel with advanced AlTiSiN-coated carbide inserts to predict surface roughness and other machining characteristics. Surface Review and Letters, 29(10), 2250137.
42. Ibrahim, A. M. M., Omer, M. A. E., Das, S. R., Li, W., Alsoufi, M. S., & Elsheikh, A. (2022). Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using nano-additives. Alexandria Engineering Journal, 61(12), 10925–10938.
43. Babu, M. N., Anandan, V., Yildirim, C. V., Parthasarathi, N. L., & Das, S. R. (2022). Performance analysis in turning of D3 tool steel using silver nanoplatelets under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
44. Rafighi, M., Özdemir, M., Şahinoğlu, A., Kumar, R., & Das, S. R. (2022). Experimental assessment and TOPSIS optimization in hard turning of AISI 52100 steel. Surface Review and Letters, 29(11), 2250150.
45. Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Surface integrity investigation in hard turning using nanofluid-assisted MQL. Advances in Materials and Processing Technologies, 8(sup3), 1714–1729.
46. Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., & Gupta, N. K. (2022). Machine learning-based modeling in hard turning of AISI D6 steel. Surface Review and Letters, 29(10), 2250137.
47. Das, A., Das, S. R., Panda, A., & Patel, S. K. (2022). Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
48. Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2022). Electrical discharge machining of engineered Al–22% SiC metal matrix composite: Surface roughness analysis, optimization, economic analysis, and sustainability assessment. Process Integration and Optimization for Sustainability, 6(2), 223–251.
49. Rafighi, M., Özdemir, M., Das, A., & Das, S. R. (2022). Machinability investigation of cryogenically treated hardened AISI 4140 alloy steel using CBN insert under sustainable finish dry hard turning. Surface Review and Letters, 29(04), 2250047.
50. Das, A., Gupta, M. K., Das, S. R., Panda, A., Patel, S. K., & Padhan, S. (2022). Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: Comparative machinability investigation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
51. Padhan, S., Das, S. R., Das, A., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2022). Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials, 15(7), 2368.
52. Das, A., Kamal, M., Das, S. R., Patel, S. K., Panda, A., Rafighi, M., & Biswal, B. B. (2022). Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
53. Rout, B., Dash, R., Dhupal, D., & Das, S. R. (2022). Optimized posture prediction for task-specific stacking process using human upper body movements. International Journal on Interactive Design and Manufacturing (IJIDeM), 16(1).
54. Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
55. Behera, R. K., Samal, B. P., Panigrahi, S. C., Das, S. R., Mohamed, A., & Muduli, K. (2022). Experimental analysis on machinability aspects of sintered aluminium metal matrix composite (Al + Si + Mg + Cu + SiC) produced by powder metallurgy method. International Journal of Materials Engineering Innovation, 13(1), 1–22.
41. Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., Somani, N., & Gupta, N. K. (2022). Machine learning-based modeling and optimization in hard turning of AISI D6 steel with advanced AlTiSiN-coated carbide inserts to predict surface roughness and other machining characteristics. Surface Review and Letters, 29(10), 2250137.
42. Ibrahim, A. M. M., Omer, M. A. E., Das, S. R., Li, W., Alsoufi, M. S., & Elsheikh, A. (2022). Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using nano-additives. Alexandria Engineering Journal, 61(12), 10925–10938.
43. Babu, M. N., Anandan, V., Yildirim, C. V., Parthasarathi, N. L., & Das, S. R. (2022). Performance analysis in turning of D3 tool steel using silver nanoplatelets under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
44. Rafighi, M., Özdemir, M., Şahinoğlu, A., Kumar, R., & Das, S. R. (2022). Experimental assessment and TOPSIS optimization in hard turning of AISI 52100 steel. Surface Review and Letters, 29(11), 2250150.
45. Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Surface integrity investigation in hard turning using nanofluid-assisted MQL. Advances in Materials and Processing Technologies, 8(sup3), 1714–1729.
46. Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., & Gupta, N. K. (2022). Machine learning-based modeling in hard turning of AISI D6 steel. Surface Review and Letters, 29(10), 2250137.
47. Das, A., Das, S. R., Panda, A., & Patel, S. K. (2022). Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
48. Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2022). Electrical discharge machining of engineered Al–22% SiC metal matrix composite: Surface roughness analysis, optimization, economic analysis, and sustainability assessment. Process Integration and Optimization for Sustainability, 6(2), 223–251.
49. Rafighi, M., Özdemir, M., Das, A., & Das, S. R. (2022). Machinability investigation of cryogenically treated hardened AISI 4140 alloy steel using CBN insert under sustainable finish dry hard turning. Surface Review and Letters, 29(04), 2250047.
50. Das, A., Gupta, M. K., Das, S. R., Panda, A., Patel, S. K., & Padhan, S. (2022). Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: Comparative machinability investigation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44.
51. Padhan, S., Das, S. R., Das, A., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2022). Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials, 15(7), 2368.
52. Das, A., Kamal, M., Das, S. R., Patel, S. K., Panda, A., Rafighi, M., & Biswal, B. B. (2022). Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
53. Rout, B., Dash, R., Dhupal, D., & Das, S. R. (2022). Optimized posture prediction for task-specific stacking process using human upper body movements. International Journal on Interactive Design and Manufacturing (IJIDeM), 16(1).
54. Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
55. Behera, R. K., Samal, B. P., Panigrahi, S. C., Das, S. R., Mohamed, A., & Muduli, K. (2022). Experimental analysis on machinability aspects of sintered aluminium metal matrix composite (Al + Si + Mg + Cu + SiC) produced by powder metallurgy method. International Journal of Materials Engineering Innovation, 13(1), 1–22.
Sk. Nazrul, L. Behera, R. K. Singh, A. Biswal, S. K. Swain* “Combined Effect of Layered Double Hydroxides and Nano silver on Bacterial Inhibition and Gas Barrier Properties of Chitosan Grafted Polyacrylonitrile Nanocomposites” Polymer-Plastic Technology and Materials,61(18), 1959-1972, (Tylor & Francis), (2022). (Impact Factor: 3.3) ISSN: 2574-089X. DOI: https://doi.org/10.1080/25740881.2022.2086814
P. K. Sethy, A. Biswal, P. Mohapatra, and S K Swain* “Nano BN reinforced cellulose-based tripolymeric hybrid nanocomposites as packaging materials” Polymer-Plastic Technology and Materials,61(11),1233-1243, (Tylor & Francis), (2022). (Impact Factor: 3.3) ISSN: 2574-089X. DOI: https://doi.org/10.1080/25740881.2022.2044048
D. Bharatiya, B. Parhi, and S K Swain* “Effect of polycaprolactone on physicochemical, biological, and mechanical properties of polyethylene oxide and polyamino acids nano block copolymers” Journal of Applied Polymer Science, 139(19), 52116, (Wiley), (2022). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.20213091
Sk. Nazrul, L. Behera, R. K. Singh, A. Biswal, S. K. Swain* “Combined Effect of Layered Double Hydroxides and Nano silver on Bacterial Inhibition and Gas Barrier Properties of Chitosan Grafted Polyacrylonitrile Nanocomposites” Polymer-Plastic Technology and Materials,61(18), 1959-1972, (Tylor & Francis), (2022). (Impact Factor: 3.3) ISSN: 2574-089X. DOI: https://doi.org/10.1080/25740881.2022.2086814
P. K. Sethy, A. Biswal, P. Mohapatra, and S K Swain* “Nano BN reinforced cellulose-based tripolymeric hybrid nanocomposites as packaging materials” Polymer-Plastic Technology and Materials,61(11),1233-1243, (Tylor & Francis), (2022). (Impact Factor: 3.3) ISSN: 2574-089X. DOI: https://doi.org/10.1080/25740881.2022.2044048
D. Bharatiya, B. Parhi, and S K Swain* “Effect of polycaprolactone on physicochemical, biological, and mechanical properties of polyethylene oxide and polyamino acids nano block copolymers” Journal of Applied Polymer Science, 139(19), 52116, (Wiley), (2022). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.20213091
Sk. Nazrul, L. Behera, R. K. Singh, A. Biswal, S. K. Swain* “Combined Effect of Layered Double Hydroxides and Nano silver on Bacterial Inhibition and Gas Barrier Properties of Chitosan Grafted Polyacrylonitrile Nanocomposites” Polymer-Plastic Technology and Materials,61(18), 1959-1972, (Tylor & Francis), (2022). (Impact Factor: 3.3) ISSN: 2574-089X. DOI: https://doi.org/10.1080/25740881.2022.2086814
P. K. Sethy, A. Biswal, P. Mohapatra, and S K Swain* “Nano BN reinforced cellulose-based tripolymeric hybrid nanocomposites as packaging materials” Polymer-Plastic Technology and Materials,61(11),1233-1243, (Tylor & Francis), (2022). (Impact Factor: 3.3) ISSN: 2574-089X. DOI: https://doi.org/10.1080/25740881.2022.2044048
D. Bharatiya, B. Parhi, and S K Swain* “Effect of polycaprolactone on physicochemical, biological, and mechanical properties of polyethylene oxide and polyamino acids nano block copolymers” Journal of Applied Polymer Science, 139(19), 52116, (Wiley), (2022). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.20213091
Sk. Nazrul, L. Behera, R. K. Singh, A. Biswal, S. K. Swain* “Combined Effect of Layered Double Hydroxides and Nano silver on Bacterial Inhibition and Gas Barrier Properties of Chitosan Grafted Polyacrylonitrile Nanocomposites” Polymer-Plastic Technology and Materials,61(18), 1959-1972, (Tylor & Francis), (2022). (Impact Factor: 3.3) ISSN: 2574-089X. DOI: https://doi.org/10.1080/25740881.2022.2086814
P. K. Sethy, A. Biswal, P. Mohapatra, and S K Swain* “Nano BN reinforced cellulose-based tripolymeric hybrid nanocomposites as packaging materials” Polymer-Plastic Technology and Materials,61(11),1233-1243, (Tylor & Francis), (2022). (Impact Factor: 3.3) ISSN: 2574-089X. DOI: https://doi.org/10.1080/25740881.2022.2044048
D. Bharatiya, B. Parhi, and S K Swain* “Effect of polycaprolactone on physicochemical, biological, and mechanical properties of polyethylene oxide and polyamino acids nano block copolymers” Journal of Applied Polymer Science, 139(19), 52116, (Wiley), (2022). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.20213091
Sk. Nazrul, L. Behera, R. K. Singh, A. Biswal, S. K. Swain* “Combined Effect of Layered Double Hydroxides and Nano silver on Bacterial Inhibition and Gas Barrier Properties of Chitosan Grafted Polyacrylonitrile Nanocomposites” Polymer-Plastic Technology and Materials,61(18), 1959-1972, (Tylor & Francis), (2022). (Impact Factor: 3.3) ISSN: 2574-089X. DOI: https://doi.org/10.1080/25740881.2022.2086814
P. K. Sethy, A. Biswal, P. Mohapatra, and S K Swain* “Nano BN reinforced cellulose-based tripolymeric hybrid nanocomposites as packaging materials” Polymer-Plastic Technology and Materials,61(11),1233-1243, (Tylor & Francis), (2022). (Impact Factor: 3.3) ISSN: 2574-089X. DOI: https://doi.org/10.1080/25740881.2022.2044048
D. Bharatiya, B. Parhi, and S K Swain* “Effect of polycaprolactone on physicochemical, biological, and mechanical properties of polyethylene oxide and polyamino acids nano block copolymers” Journal of Applied Polymer Science, 139(19), 52116, (Wiley), (2022). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.20213091
Sk. Nazrul, L. Behera, R. K. Singh, A. Biswal, S. K. Swain* “Combined Effect of Layered Double Hydroxides and Nano silver on Bacterial Inhibition and Gas Barrier Properties of Chitosan Grafted Polyacrylonitrile Nanocomposites” Polymer-Plastic Technology and Materials,61(18), 1959-1972, (Tylor & Francis), (2022). (Impact Factor: 3.3) ISSN: 2574-089X. DOI: https://doi.org/10.1080/25740881.2022.2086814
P. K. Sethy, A. Biswal, P. Mohapatra, and S K Swain* “Nano BN reinforced cellulose-based tripolymeric hybrid nanocomposites as packaging materials” Polymer-Plastic Technology and Materials,61(11),1233-1243, (Tylor & Francis), (2022). (Impact Factor: 3.3) ISSN: 2574-089X. DOI: https://doi.org/10.1080/25740881.2022.2044048
D. Bharatiya, B. Parhi, and S K Swain* “Effect of polycaprolactone on physicochemical, biological, and mechanical properties of polyethylene oxide and polyamino acids nano block copolymers” Journal of Applied Polymer Science, 139(19), 52116, (Wiley), (2022). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.20213091
Sk. Nazrul, L. Behera, R. K. Singh, A. Biswal, S. K. Swain* “Combined Effect of Layered Double Hydroxides and Nano silver on Bacterial Inhibition and Gas Barrier Properties of Chitosan Grafted Polyacrylonitrile Nanocomposites” Polymer-Plastic Technology and Materials,61(18), 1959-1972, (Tylor & Francis), (2022). (Impact Factor: 3.3) ISSN: 2574-089X. DOI: https://doi.org/10.1080/25740881.2022.2086814
P. K. Sethy, A. Biswal, P. Mohapatra, and S K Swain* “Nano BN reinforced cellulose-based tripolymeric hybrid nanocomposites as packaging materials” Polymer-Plastic Technology and Materials,61(11),1233-1243, (Tylor & Francis), (2022). (Impact Factor: 3.3) ISSN: 2574-089X. DOI: https://doi.org/10.1080/25740881.2022.2044048
36. D. Bharatiya, B. Parhi, and S K Swain* “Effect of polycaprolactone on physicochemical, biological, and mechanical properties of polyethylene oxide and polyamino acids nano block copolymers” Journal of Applied Polymer Science, 139(19), 52116, (Wiley), (2022). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.20213091
Padhi, P. K., et al. "Integrating Soft Skill Training in Professional Courses for Sustainable Employment: An overview" in BOHR International Journal of Social Science and Humanities Research. Vol. 1, No. 1, 2022, p. 17â€“24 DOI: 10.54646/bijsshr.0001
Padhi, P. K., et al. "Integrating Soft Skill Training in Professional Courses for Sustainable Employment: An overview" in BOHR International Journal of Social Science and Humanities Research. Vol. 1, No. 1, 2022, p. 17â€“24 DOI: 10.54646/bijsshr.0001
Padhi, P. K., et al. "Integrating Soft Skill Training in Professional Courses for Sustainable Employment: An overview" in BOHR International Journal of Social Science and Humanities Research. Vol. 1, No. 1, 2022, p. 17â€“24 DOI: 10.54646/bijsshr.0001
Padhi, P. K., et al. "Integrating Soft Skill Training in Professional Courses for Sustainable Employment: An overview" in BOHR International Journal of Social Science and Humanities Research. Vol. 1, No. 1, 2022, p. 17â€“24 DOI: 10.54646/bijsshr.0001
A Jena, B Rout & N Saha, Modified Particle Swarm Optimized Load Frequency Control of Renewable Energy Sources-Based Integrated Power Systems, pp 483–496, Sustainable Energy and Technological Advancements, 25 March 2022
N Saha, S K Sahoo, B Rout, S Panda, G Panda & D K. Sahoo, Solar PV-Powered SRM Drive and Its Speed Control and Torque Ripple Minimization, Springer Nature, Sustainable Energy and Technological Advancements, pp 293–306, 25 March 2022
D Rath, A K Patra, S Mohapatra, S K Kar, D K Subudhi, B Rout, Performance Analysis of VPTADF Controller based Photovoltaic System, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10010095, 16 January 2023
A K Patra, B Rout, R Agrawal, A K Mishra, G S Panigrahi, A Nanda, An Automatic Artificial Pancreas (AP) based on MO-PID Control Algorithm, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10009980, 16 January 2023
A K. Patra, A Nanda, B. Rout & D K. Subudhi, Artificial Pancreas (AP) Based on the JAYA Optimized PI Controller (JAYA-PIC), pp 11–20, Springer Nature, Ambient Intelligence in Health Care , 23 November 2022
A Jena, B Rout & N Saha, Modified Particle Swarm Optimized Load Frequency Control of Renewable Energy Sources-Based Integrated Power Systems, pp 483–496, Sustainable Energy and Technological Advancements, 25 March 2022
N Saha, S K Sahoo, B Rout, S Panda, G Panda & D K. Sahoo, Solar PV-Powered SRM Drive and Its Speed Control and Torque Ripple Minimization, Springer Nature, Sustainable Energy and Technological Advancements, pp 293–306, 25 March 2022
D Rath, A K Patra, S Mohapatra, S K Kar, D K Subudhi, B Rout, Performance Analysis of VPTADF Controller based Photovoltaic System, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10010095, 16 January 2023
A K Patra, B Rout, R Agrawal, A K Mishra, G S Panigrahi, A Nanda, An Automatic Artificial Pancreas (AP) based on MO-PID Control Algorithm, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10009980, 16 January 2023
A K. Patra, A Nanda, B. Rout & D K. Subudhi, Artificial Pancreas (AP) Based on the JAYA Optimized PI Controller (JAYA-PIC), pp 11–20, Springer Nature, Ambient Intelligence in Health Care , 23 November 2022
A Jena, B Rout & N Saha, Modified Particle Swarm Optimized Load Frequency Control of Renewable Energy Sources-Based Integrated Power Systems, pp 483–496, Sustainable Energy and Technological Advancements, 25 March 2022
N Saha, S K Sahoo, B Rout, S Panda, G Panda & D K. Sahoo, Solar PV-Powered SRM Drive and Its Speed Control and Torque Ripple Minimization, Springer Nature, Sustainable Energy and Technological Advancements, pp 293–306, 25 March 2022
D Rath, A K Patra, S Mohapatra, S K Kar, D K Subudhi, B Rout, Performance Analysis of VPTADF Controller based Photovoltaic System, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10010095, 16 January 2023
A K Patra, B Rout, R Agrawal, A K Mishra, G S Panigrahi, A Nanda, An Automatic Artificial Pancreas (AP) based on MO-PID Control Algorithm, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10009980, 16 January 2023
A K. Patra, A Nanda, B. Rout & D K. Subudhi, Artificial Pancreas (AP) Based on the JAYA Optimized PI Controller (JAYA-PIC), pp 11–20, Springer Nature, Ambient Intelligence in Health Care , 23 November 2022
A Jena, B Rout & N Saha, Modified Particle Swarm Optimized Load Frequency Control of Renewable Energy Sources-Based Integrated Power Systems, pp 483–496, Sustainable Energy and Technological Advancements, 25 March 2022
N Saha, S K Sahoo, B Rout, S Panda, G Panda & D K. Sahoo, Solar PV-Powered SRM Drive and Its Speed Control and Torque Ripple Minimization, Springer Nature, Sustainable Energy and Technological Advancements, pp 293–306, 25 March 2022
D Rath, A K Patra, S Mohapatra, S K Kar, D K Subudhi, B Rout, Performance Analysis of VPTADF Controller based Photovoltaic System, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10010095, 16 January 2023
A K Patra, B Rout, R Agrawal, A K Mishra, G S Panigrahi, A Nanda, An Automatic Artificial Pancreas (AP) based on MO-PID Control Algorithm, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10009980, 16 January 2023
A K. Patra, A Nanda, B. Rout & D K. Subudhi, Artificial Pancreas (AP) Based on the JAYA Optimized PI Controller (JAYA-PIC), pp 11–20, Springer Nature, Ambient Intelligence in Health Care , 23 November 2022
A Jena, B Rout & N Saha, Modified Particle Swarm Optimized Load Frequency Control of Renewable Energy Sources-Based Integrated Power Systems, pp 483–496, Sustainable Energy and Technological Advancements, 25 March 2022
N Saha, S K Sahoo, B Rout, S Panda, G Panda & D K. Sahoo, Solar PV-Powered SRM Drive and Its Speed Control and Torque Ripple Minimization, Springer Nature, Sustainable Energy and Technological Advancements, pp 293–306, 25 March 2022
D Rath, A K Patra, S Mohapatra, S K Kar, D K Subudhi, B Rout, Performance Analysis of VPTADF Controller based Photovoltaic System, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10010095, 16 January 2023
A K Patra, B Rout, R Agrawal, A K Mishra, G S Panigrahi, A Nanda, An Automatic Artificial Pancreas (AP) based on MO-PID Control Algorithm, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10009980, 16 January 2023
A K. Patra, A Nanda, B. Rout & D K. Subudhi, Artificial Pancreas (AP) Based on the JAYA Optimized PI Controller (JAYA-PIC), pp 11–20, Springer Nature, Ambient Intelligence in Health Care , 23 November 2022
A Jena, B Rout & N Saha, Modified Particle Swarm Optimized Load Frequency Control of Renewable Energy Sources-Based Integrated Power Systems, pp 483–496, Sustainable Energy and Technological Advancements, 25 March 2022
N Saha, S K Sahoo, B Rout, S Panda, G Panda & D K. Sahoo, Solar PV-Powered SRM Drive and Its Speed Control and Torque Ripple Minimization, Springer Nature, Sustainable Energy and Technological Advancements, pp 293–306, 25 March 2022
D Rath, A K Patra, S Mohapatra, S K Kar, D K Subudhi, B Rout, Performance Analysis of VPTADF Controller based Photovoltaic System, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10010095, 16 January 2023
A K Patra, B Rout, R Agrawal, A K Mishra, G S Panigrahi, A Nanda, An Automatic Artificial Pancreas (AP) based on MO-PID Control Algorithm, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10009980, 16 January 2023
A K. Patra, A Nanda, B. Rout & D K. Subudhi, Artificial Pancreas (AP) Based on the JAYA Optimized PI Controller (JAYA-PIC), pp 11–20, Springer Nature, Ambient Intelligence in Health Care , 23 November 2022
"Energy-efficient cloud integrated sensor based on clustering and multihop transmission", Kalyan Das & Satyabrata Das,Â Science, Engineering and Health Studies(Scopus), Volume 16, 2022, ISSN (Online): 2630-0087, https://li01.tci-thaijo.org/index.php/sehs/article/view/247889
"Constrained-Based Power Management Algorithm for Green Cloud Computing", Sanjib Kumar Nayak, Sanjaya Kumar Panda & Satyabrata Das, International Journal of Computational Science and Engineering(Scopus), Inderscience, pp 657-667, https://doi.org/10.1504/IJCSE.2022.127187
"A Multi-Objective Renewable Energy-Based Algorithm for Geographically Distributed Datacenters", Sanjib Kumar Nayak, Sanjaya Kumar Panda, Satyabrata Das, Sohan Kumar Pande, International Journal of Embedded Systems(Scopus), Inderscience, 2022, 15(2), pp. 119-131, https://doi.org/10.1504/IJES.2022.123304
"Energy-Efficient Cloud integrated Sensor Network Model Based on Data Forecasting through ARIMA",Kalyan Das & Satyabrata Das, International Journal of e-Collaboration,igi-global 2021,(ESCI)(Scopus), Volume 18, Issue 1, Article 6, DOI: 10.4018/IJeC.290292
"Minimization of Energy Holes with Lively Bonding and the Division of Coverage", Chinmaya Ku. Nayak & Satyabrata Das, International Journal of e-Collaboration, igi-global 2021, (ESCI) (Scopus), Volume 18, Issue 2, Article 5, DOI: 10.4018/IJeC.304031
Trinath Biswal (2022) Thermomechanical and Viscoelastic Behavior of Biodegradable and Biocompatible Polymer Nanocomposite, published online, Journal of Molecular and Engineering Materials, 10(03n04), https://doi.org/10.1142/S2251237322300017. (UGC CARE, ESCI)
Biswal, T., Shadangi, K. P., Sarangi, P. K., & Srivastava, R. K. (2022). Conversion of carbon dioxide to methanol: A comprehensive review, Chemosphere, 298, 134299. (Scopus, SCI, IF: 8.943)
Swain P. K. & Biswal, T.*(2022), Design and Eco-Utilization of Blast Furnace Slag generated from Rourkela Steel Plant, Odisha, India, Indian Journal of Environmental Protection, 42(4), 73-79. (Scopus).
A Jena, B Rout & N Saha, Modified Particle Swarm Optimized Load Frequency Control of Renewable Energy Sources-Based Integrated Power Systems, pp 483–496, Sustainable Energy and Technological Advancements, 25 March 2022
N Saha, S K Sahoo, B Rout, S Panda, G Panda & D K. Sahoo, Solar PV-Powered SRM Drive and Its Speed Control and Torque Ripple Minimization, Springer Nature, Sustainable Energy and Technological Advancements, pp 293–306, 25 March 2022
D Rath, A K Patra, S Mohapatra, S K Kar, D K Subudhi, B Rout, Performance Analysis of VPTADF Controller based Photovoltaic System, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10010095, 16 January 2023
A K Patra, B Rout, R Agrawal, A K Mishra, G S Panigrahi, A Nanda, An Automatic Artificial Pancreas (AP) based on MO-PID Control Algorithm, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10009980, 16 January 2023
A K. Patra, A Nanda, B. Rout & D K. Subudhi, Artificial Pancreas (AP) Based on the JAYA Optimized PI Controller (JAYA-PIC), pp 11–20, Springer Nature, Ambient Intelligence in Health Care , 23 November 2022
A Jena, B Rout & N Saha, Modified Particle Swarm Optimized Load Frequency Control of Renewable Energy Sources-Based Integrated Power Systems, pp 483–496, Sustainable Energy and Technological Advancements, 25 March 2022
N Saha, S K Sahoo, B Rout, S Panda, G Panda & D K. Sahoo, Solar PV-Powered SRM Drive and Its Speed Control and Torque Ripple Minimization, Springer Nature, Sustainable Energy and Technological Advancements, pp 293–306, 25 March 2022
D Rath, A K Patra, S Mohapatra, S K Kar, D K Subudhi, B Rout, Performance Analysis of VPTADF Controller based Photovoltaic System, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10010095, 16 January 2023
A K Patra, B Rout, R Agrawal, A K Mishra, G S Panigrahi, A Nanda, An Automatic Artificial Pancreas (AP) based on MO-PID Control Algorithm, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10009980, 16 January 2023
A K. Patra, A Nanda, B. Rout & D K. Subudhi, Artificial Pancreas (AP) Based on the JAYA Optimized PI Controller (JAYA-PIC), pp 11–20, Springer Nature, Ambient Intelligence in Health Care , 23 November 2022
A Jena, B Rout & N Saha, Modified Particle Swarm Optimized Load Frequency Control of Renewable Energy Sources-Based Integrated Power Systems, pp 483–496, Sustainable Energy and Technological Advancements, 25 March 2022
N Saha, S K Sahoo, B Rout, S Panda, G Panda & D K. Sahoo, Solar PV-Powered SRM Drive and Its Speed Control and Torque Ripple Minimization, Springer Nature, Sustainable Energy and Technological Advancements, pp 293–306, 25 March 2022
D Rath, A K Patra, S Mohapatra, S K Kar, D K Subudhi, B Rout, Performance Analysis of VPTADF Controller based Photovoltaic System, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10010095, 16 January 2023
A K Patra, B Rout, R Agrawal, A K Mishra, G S Panigrahi, A Nanda, An Automatic Artificial Pancreas (AP) based on MO-PID Control Algorithm, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10009980, 16 January 2023
A K. Patra, A Nanda, B. Rout & D K. Subudhi, Artificial Pancreas (AP) Based on the JAYA Optimized PI Controller (JAYA-PIC), pp 11–20, Springer Nature, Ambient Intelligence in Health Care , 23 November 2022
A Jena, B Rout & N Saha, Modified Particle Swarm Optimized Load Frequency Control of Renewable Energy Sources-Based Integrated Power Systems, pp 483–496, Sustainable Energy and Technological Advancements, 25 March 2022
N Saha, S K Sahoo, B Rout, S Panda, G Panda & D K. Sahoo, Solar PV-Powered SRM Drive and Its Speed Control and Torque Ripple Minimization, Springer Nature, Sustainable Energy and Technological Advancements, pp 293–306, 25 March 2022
D Rath, A K Patra, S Mohapatra, S K Kar, D K Subudhi, B Rout, Performance Analysis of VPTADF Controller based Photovoltaic System, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10010095, 16 January 2023
A K Patra, B Rout, R Agrawal, A K Mishra, G S Panigrahi, A Nanda, An Automatic Artificial Pancreas (AP) based on MO-PID Control Algorithm, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10009980, 16 January 2023
A K. Patra, A Nanda, B. Rout & D K. Subudhi, Artificial Pancreas (AP) Based on the JAYA Optimized PI Controller (JAYA-PIC), pp 11–20, Springer Nature, Ambient Intelligence in Health Care , 23 November 2022
A Jena, B Rout & N Saha, Modified Particle Swarm Optimized Load Frequency Control of Renewable Energy Sources-Based Integrated Power Systems, pp 483–496, Sustainable Energy and Technological Advancements, 25 March 2022
N Saha, S K Sahoo, B Rout, S Panda, G Panda & D K. Sahoo, Solar PV-Powered SRM Drive and Its Speed Control and Torque Ripple Minimization, Springer Nature, Sustainable Energy and Technological Advancements, pp 293–306, 25 March 2022
D Rath, A K Patra, S Mohapatra, S K Kar, D K Subudhi, B Rout, Performance Analysis of VPTADF Controller based Photovoltaic System, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10010095, 16 January 2023
A K Patra, B Rout, R Agrawal, A K Mishra, G S Panigrahi, A Nanda, An Automatic Artificial Pancreas (AP) based on MO-PID Control Algorithm, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10009980, 16 January 2023
A K. Patra, A Nanda, B. Rout & D K. Subudhi, Artificial Pancreas (AP) Based on the JAYA Optimized PI Controller (JAYA-PIC), pp 11–20, Springer Nature, Ambient Intelligence in Health Care , 23 November 2022
A Jena, B Rout & N Saha, Modified Particle Swarm Optimized Load Frequency Control of Renewable Energy Sources-Based Integrated Power Systems, pp 483–496, Sustainable Energy and Technological Advancements, 25 March 2022
N Saha, S K Sahoo, B Rout, S Panda, G Panda & D K. Sahoo, Solar PV-Powered SRM Drive and Its Speed Control and Torque Ripple Minimization, Springer Nature, Sustainable Energy and Technological Advancements, pp 293–306, 25 March 2022
D Rath, A K Patra, S Mohapatra, S K Kar, D K Subudhi, B Rout, Performance Analysis of VPTADF Controller based Photovoltaic System, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10010095, 16 January 2023
A K Patra, B Rout, R Agrawal, A K Mishra, G S Panigrahi, A Nanda, An Automatic Artificial Pancreas (AP) based on MO-PID Control Algorithm, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10009980, 16 January 2023
A K. Patra, A Nanda, B. Rout & D K. Subudhi, Artificial Pancreas (AP) Based on the JAYA Optimized PI Controller (JAYA-PIC), pp 11–20, Springer Nature, Ambient Intelligence in Health Care , 23 November 2022
A Jena, B Rout & N Saha, Modified Particle Swarm Optimized Load Frequency Control of Renewable Energy Sources-Based Integrated Power Systems, pp 483–496, Sustainable Energy and Technological Advancements, 25 March 2022
N Saha, S K Sahoo, B Rout, S Panda, G Panda & D K. Sahoo, Solar PV-Powered SRM Drive and Its Speed Control and Torque Ripple Minimization, Springer Nature, Sustainable Energy and Technological Advancements, pp 293–306, 25 March 2022
D Rath, A K Patra, S Mohapatra, S K Kar, D K Subudhi, B Rout, Performance Analysis of VPTADF Controller based Photovoltaic System, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10010095, 16 January 2023
A K Patra, B Rout, R Agrawal, A K Mishra, G S Panigrahi, A Nanda, An Automatic Artificial Pancreas (AP) based on MO-PID Control Algorithm, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10009980, 16 January 2023
A K. Patra, A Nanda, B. Rout & D K. Subudhi, Artificial Pancreas (AP) Based on the JAYA Optimized PI Controller (JAYA-PIC), pp 11–20, Springer Nature, Ambient Intelligence in Health Care , 23 November 2022
A Jena, B Rout & N Saha, Modified Particle Swarm Optimized Load Frequency Control of Renewable Energy Sources-Based Integrated Power Systems, pp 483–496, Sustainable Energy and Technological Advancements, 25 March 2022
N Saha, S K Sahoo, B Rout, S Panda, G Panda & D K. Sahoo, Solar PV-Powered SRM Drive and Its Speed Control and Torque Ripple Minimization, Springer Nature, Sustainable Energy and Technological Advancements, pp 293–306, 25 March 2022
D Rath, A K Patra, S Mohapatra, S K Kar, D K Subudhi, B Rout, Performance Analysis of VPTADF Controller based Photovoltaic System, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10010095, 16 January 2023
A K Patra, B Rout, R Agrawal, A K Mishra, G S Panigrahi, A Nanda, An Automatic Artificial Pancreas (AP) based on MO-PID Control Algorithm, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10009980, 16 January 2023
A K. Patra, A Nanda, B. Rout & D K. Subudhi, Artificial Pancreas (AP) Based on the JAYA Optimized PI Controller (JAYA-PIC), pp 11–20, Springer Nature, Ambient Intelligence in Health Care , 23 November 2022
A Jena, B Rout & N Saha, Modified Particle Swarm Optimized Load Frequency Control of Renewable Energy Sources-Based Integrated Power Systems, pp 483–496, Sustainable Energy and Technological Advancements, 25 March 2022
N Saha, S K Sahoo, B Rout, S Panda, G Panda & D K. Sahoo, Solar PV-Powered SRM Drive and Its Speed Control and Torque Ripple Minimization, Springer Nature, Sustainable Energy and Technological Advancements, pp 293–306, 25 March 2022
D Rath, A K Patra, S Mohapatra, S K Kar, D K Subudhi, B Rout, Performance Analysis of VPTADF Controller based Photovoltaic System, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10010095, 16 January 2023
A K Patra, B Rout, R Agrawal, A K Mishra, G S Panigrahi, A Nanda, An Automatic Artificial Pancreas (AP) based on MO-PID Control Algorithm, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10009980, 16 January 2023
A K. Patra, A Nanda, B. Rout & D K. Subudhi, Artificial Pancreas (AP) Based on the JAYA Optimized PI Controller (JAYA-PIC), pp 11–20, Springer Nature, Ambient Intelligence in Health Care , 23 November 2022
A Jena, B Rout & N Saha, Modified Particle Swarm Optimized Load Frequency Control of Renewable Energy Sources-Based Integrated Power Systems, pp 483–496, Sustainable Energy and Technological Advancements, 25 March 2022
N Saha, S K Sahoo, B Rout, S Panda, G Panda & D K. Sahoo, Solar PV-Powered SRM Drive and Its Speed Control and Torque Ripple Minimization, Springer Nature, Sustainable Energy and Technological Advancements, pp 293–306, 25 March 2022
D Rath, A K Patra, S Mohapatra, S K Kar, D K Subudhi, B Rout, Performance Analysis of VPTADF Controller based Photovoltaic System, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10010095, 16 January 2023
A K Patra, B Rout, R Agrawal, A K Mishra, G S Panigrahi, A Nanda, An Automatic Artificial Pancreas (AP) based on MO-PID Control Algorithm, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10009980, 16 January 2023
A K. Patra, A Nanda, B. Rout & D K. Subudhi, Artificial Pancreas (AP) Based on the JAYA Optimized PI Controller (JAYA-PIC), pp 11–20, Springer Nature, Ambient Intelligence in Health Care , 23 November 2022
A Jena, B Rout & N Saha, Modified Particle Swarm Optimized Load Frequency Control of Renewable Energy Sources-Based Integrated Power Systems, pp 483–496, Sustainable Energy and Technological Advancements, 25 March 2022
N Saha, S K Sahoo, B Rout, S Panda, G Panda & D K. Sahoo, Solar PV-Powered SRM Drive and Its Speed Control and Torque Ripple Minimization, Springer Nature, Sustainable Energy and Technological Advancements, pp 293–306, 25 March 2022
D Rath, A K Patra, S Mohapatra, S K Kar, D K Subudhi, B Rout, Performance Analysis of VPTADF Controller based Photovoltaic System, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10010095, 16 January 2023
A K Patra, B Rout, R Agrawal, A K Mishra, G S Panigrahi, A Nanda, An Automatic Artificial Pancreas (AP) based on MO-PID Control Algorithm, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10009980, 16 January 2023
A K. Patra, A Nanda, B. Rout & D K. Subudhi, Artificial Pancreas (AP) Based on the JAYA Optimized PI Controller (JAYA-PIC), pp 11–20, Springer Nature, Ambient Intelligence in Health Care , 23 November 2022
A Jena, B Rout & N Saha, Modified Particle Swarm Optimized Load Frequency Control of Renewable Energy Sources-Based Integrated Power Systems, pp 483–496, Sustainable Energy and Technological Advancements, 25 March 2022
N Saha, S K Sahoo, B Rout, S Panda, G Panda & D K. Sahoo, Solar PV-Powered SRM Drive and Its Speed Control and Torque Ripple Minimization, Springer Nature, Sustainable Energy and Technological Advancements, pp 293–306, 25 March 2022
D Rath, A K Patra, S Mohapatra, S K Kar, D K Subudhi, B Rout, Performance Analysis of VPTADF Controller based Photovoltaic System, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10010095, 16 January 2023
A K Patra, B Rout, R Agrawal, A K Mishra, G S Panigrahi, A Nanda, An Automatic Artificial Pancreas (AP) based on MO-PID Control Algorithm, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10009980, 16 January 2023
A K. Patra, A Nanda, B. Rout & D K. Subudhi, Artificial Pancreas (AP) Based on the JAYA Optimized PI Controller (JAYA-PIC), pp 11–20, Springer Nature, Ambient Intelligence in Health Care , 23 November 2022
A Jena, B Rout & N Saha, Modified Particle Swarm Optimized Load Frequency Control of Renewable Energy Sources-Based Integrated Power Systems, pp 483–496, Sustainable Energy and Technological Advancements, 25 March 2022
N Saha, S K Sahoo, B Rout, S Panda, G Panda & D K. Sahoo, Solar PV-Powered SRM Drive and Its Speed Control and Torque Ripple Minimization, Springer Nature, Sustainable Energy and Technological Advancements, pp 293–306, 25 March 2022
D Rath, A K Patra, S Mohapatra, S K Kar, D K Subudhi, B Rout, Performance Analysis of VPTADF Controller based Photovoltaic System, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10010095, 16 January 2023
A K Patra, B Rout, R Agrawal, A K Mishra, G S Panigrahi, A Nanda, An Automatic Artificial Pancreas (AP) based on MO-PID Control Algorithm, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10009980, 16 January 2023
A K. Patra, A Nanda, B. Rout & D K. Subudhi, Artificial Pancreas (AP) Based on the JAYA Optimized PI Controller (JAYA-PIC), pp 11–20, Springer Nature, Ambient Intelligence in Health Care , 23 November 2022
A Jena, B Rout & N Saha, Modified Particle Swarm Optimized Load Frequency Control of Renewable Energy Sources-Based Integrated Power Systems, pp 483–496, Sustainable Energy and Technological Advancements, 25 March 2022
N Saha, S K Sahoo, B Rout, S Panda, G Panda & D K. Sahoo, Solar PV-Powered SRM Drive and Its Speed Control and Torque Ripple Minimization, Springer Nature, Sustainable Energy and Technological Advancements, pp 293–306, 25 March 2022
D Rath, A K Patra, S Mohapatra, S K Kar, D K Subudhi, B Rout, Performance Analysis of VPTADF Controller based Photovoltaic System, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10010095, 16 January 2023
A K Patra, B Rout, R Agrawal, A K Mishra, G S Panigrahi, A Nanda, An Automatic Artificial Pancreas (AP) based on MO-PID Control Algorithm, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10009980, 16 January 2023
A K. Patra, A Nanda, B. Rout & D K. Subudhi, Artificial Pancreas (AP) Based on the JAYA Optimized PI Controller (JAYA-PIC), pp 11–20, Springer Nature, Ambient Intelligence in Health Care , 23 November 2022
A Jena, B Rout & N Saha, Modified Particle Swarm Optimized Load Frequency Control of Renewable Energy Sources-Based Integrated Power Systems, pp 483–496, Sustainable Energy and Technological Advancements, 25 March 2022
N Saha, S K Sahoo, B Rout, S Panda, G Panda & D K. Sahoo, Solar PV-Powered SRM Drive and Its Speed Control and Torque Ripple Minimization, Springer Nature, Sustainable Energy and Technological Advancements, pp 293–306, 25 March 2022
D Rath, A K Patra, S Mohapatra, S K Kar, D K Subudhi, B Rout, Performance Analysis of VPTADF Controller based Photovoltaic System, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10010095, 16 January 2023
A K Patra, B Rout, R Agrawal, A K Mishra, G S Panigrahi, A Nanda, An Automatic Artificial Pancreas (AP) based on MO-PID Control Algorithm, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10009980, 16 January 2023
A K. Patra, A Nanda, B. Rout & D K. Subudhi, Artificial Pancreas (AP) Based on the JAYA Optimized PI Controller (JAYA-PIC), pp 11–20, Springer Nature, Ambient Intelligence in Health Care , 23 November 2022
A Jena, B Rout & N Saha, Modified Particle Swarm Optimized Load Frequency Control of Renewable Energy Sources-Based Integrated Power Systems, pp 483–496, Sustainable Energy and Technological Advancements, 25 March 2022
N Saha, S K Sahoo, B Rout, S Panda, G Panda & D K. Sahoo, Solar PV-Powered SRM Drive and Its Speed Control and Torque Ripple Minimization, Springer Nature, Sustainable Energy and Technological Advancements, pp 293–306, 25 March 2022
D Rath, A K Patra, S Mohapatra, S K Kar, D K Subudhi, B Rout, Performance Analysis of VPTADF Controller based Photovoltaic System, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10010095, 16 January 2023
A K Patra, B Rout, R Agrawal, A K Mishra, G S Panigrahi, A Nanda, An Automatic Artificial Pancreas (AP) based on MO-PID Control Algorithm, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10009980, 16 January 2023
A K. Patra, A Nanda, B. Rout & D K. Subudhi, Artificial Pancreas (AP) Based on the JAYA Optimized PI Controller (JAYA-PIC), pp 11–20, Springer Nature, Ambient Intelligence in Health Care , 23 November 2022
A Jena, B Rout & N Saha, Modified Particle Swarm Optimized Load Frequency Control of Renewable Energy Sources-Based Integrated Power Systems, pp 483–496, Sustainable Energy and Technological Advancements, 25 March 2022
N Saha, S K Sahoo, B Rout, S Panda, G Panda & D K. Sahoo, Solar PV-Powered SRM Drive and Its Speed Control and Torque Ripple Minimization, Springer Nature, Sustainable Energy and Technological Advancements, pp 293–306, 25 March 2022
D Rath, A K Patra, S Mohapatra, S K Kar, D K Subudhi, B Rout, Performance Analysis of VPTADF Controller based Photovoltaic System, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10010095, 16 January 2023
A K Patra, B Rout, R Agrawal, A K Mishra, G S Panigrahi, A Nanda, An Automatic Artificial Pancreas (AP) based on MO-PID Control Algorithm, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10009980, 16 January 2023
A K. Patra, A Nanda, B. Rout & D K. Subudhi, Artificial Pancreas (AP) Based on the JAYA Optimized PI Controller (JAYA-PIC), pp 11–20, Springer Nature, Ambient Intelligence in Health Care , 23 November 2022
A Jena, B Rout & N Saha, Modified Particle Swarm Optimized Load Frequency Control of Renewable Energy Sources-Based Integrated Power Systems, pp 483–496, Sustainable Energy and Technological Advancements, 25 March 2022
N Saha, S K Sahoo, B Rout, S Panda, G Panda & D K. Sahoo, Solar PV-Powered SRM Drive and Its Speed Control and Torque Ripple Minimization, Springer Nature, Sustainable Energy and Technological Advancements, pp 293–306, 25 March 2022
D Rath, A K Patra, S Mohapatra, S K Kar, D K Subudhi, B Rout, Performance Analysis of VPTADF Controller based Photovoltaic System, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10010095, 16 January 2023
A K Patra, B Rout, R Agrawal, A K Mishra, G S Panigrahi, A Nanda, An Automatic Artificial Pancreas (AP) based on MO-PID Control Algorithm, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10009980, 16 January 2023
A K. Patra, A Nanda, B. Rout & D K. Subudhi, Artificial Pancreas (AP) Based on the JAYA Optimized PI Controller (JAYA-PIC), pp 11–20, Springer Nature, Ambient Intelligence in Health Care , 23 November 2022
A Jena, B Rout & N Saha, Modified Particle Swarm Optimized Load Frequency Control of Renewable Energy Sources-Based Integrated Power Systems, pp 483–496, Sustainable Energy and Technological Advancements, 25 March 2022
N Saha, S K Sahoo, B Rout, S Panda, G Panda & D K. Sahoo, Solar PV-Powered SRM Drive and Its Speed Control and Torque Ripple Minimization, Springer Nature, Sustainable Energy and Technological Advancements, pp 293–306, 25 March 2022
D Rath, A K Patra, S Mohapatra, S K Kar, D K Subudhi, B Rout, Performance Analysis of VPTADF Controller based Photovoltaic System, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10010095, 16 January 2023
A K Patra, B Rout, R Agrawal, A K Mishra, G S Panigrahi, A Nanda, An Automatic Artificial Pancreas (AP) based on MO-PID Control Algorithm, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10009980, 16 January 2023
A K. Patra, A Nanda, B. Rout & D K. Subudhi, Artificial Pancreas (AP) Based on the JAYA Optimized PI Controller (JAYA-PIC), pp 11–20, Springer Nature, Ambient Intelligence in Health Care , 23 November 2022
A Jena, B Rout & N Saha, Modified Particle Swarm Optimized Load Frequency Control of Renewable Energy Sources-Based Integrated Power Systems, pp 483–496, Sustainable Energy and Technological Advancements, 25 March 2022
N Saha, S K Sahoo, B Rout, S Panda, G Panda & D K. Sahoo, Solar PV-Powered SRM Drive and Its Speed Control and Torque Ripple Minimization, Springer Nature, Sustainable Energy and Technological Advancements, pp 293–306, 25 March 2022
D Rath, A K Patra, S Mohapatra, S K Kar, D K Subudhi, B Rout, Performance Analysis of VPTADF Controller based Photovoltaic System, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10010095, 16 January 2023
A K Patra, B Rout, R Agrawal, A K Mishra, G S Panigrahi, A Nanda, An Automatic Artificial Pancreas (AP) based on MO-PID Control Algorithm, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10009980, 16 January 2023
A K. Patra, A Nanda, B. Rout & D K. Subudhi, Artificial Pancreas (AP) Based on the JAYA Optimized PI Controller (JAYA-PIC), pp 11–20, Springer Nature, Ambient Intelligence in Health Care , 23 November 2022
A Jena, B Rout & N Saha, Modified Particle Swarm Optimized Load Frequency Control of Renewable Energy Sources-Based Integrated Power Systems, pp 483–496, Sustainable Energy and Technological Advancements, 25 March 2022
N Saha, S K Sahoo, B Rout, S Panda, G Panda & D K. Sahoo, Solar PV-Powered SRM Drive and Its Speed Control and Torque Ripple Minimization, Springer Nature, Sustainable Energy and Technological Advancements, pp 293–306, 25 March 2022
D Rath, A K Patra, S Mohapatra, S K Kar, D K Subudhi, B Rout, Performance Analysis of VPTADF Controller based Photovoltaic System, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10010095, 16 January 2023
A K Patra, B Rout, R Agrawal, A K Mishra, G S Panigrahi, A Nanda, An Automatic Artificial Pancreas (AP) based on MO-PID Control Algorithm, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10009980, 16 January 2023
A K. Patra, A Nanda, B. Rout & D K. Subudhi, Artificial Pancreas (AP) Based on the JAYA Optimized PI Controller (JAYA-PIC), pp 11–20, Springer Nature, Ambient Intelligence in Health Care , 23 November 2022
A Jena, B Rout & N Saha, Modified Particle Swarm Optimized Load Frequency Control of Renewable Energy Sources-Based Integrated Power Systems, pp 483–496, Sustainable Energy and Technological Advancements, 25 March 2022
N Saha, S K Sahoo, B Rout, S Panda, G Panda & D K. Sahoo, Solar PV-Powered SRM Drive and Its Speed Control and Torque Ripple Minimization, Springer Nature, Sustainable Energy and Technological Advancements, pp 293–306, 25 March 2022
D Rath, A K Patra, S Mohapatra, S K Kar, D K Subudhi, B Rout, Performance Analysis of VPTADF Controller based Photovoltaic System, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10010095, 16 January 2023
A K Patra, B Rout, R Agrawal, A K Mishra, G S Panigrahi, A Nanda, An Automatic Artificial Pancreas (AP) based on MO-PID Control Algorithm, IEEE 2nd Odisha International Conference on Electrical Power Engineering, Communication and Computing Technology (ODICON), 10.1109/ODICON54453.2022.10009980, 16 January 2023
A K. Patra, A Nanda, B. Rout & D K. Subudhi, Artificial Pancreas (AP) Based on the JAYA Optimized PI Controller (JAYA-PIC), pp 11–20, Springer Nature, Ambient Intelligence in Health Care , 23 November 2022
B. Das, S. R. Parimanik, T. R. Mahapatra, and D. Mishra, (2022) Machinability assessment of NiTinol shape memory alloy in electrochemical machining, International Journal of Machining and Machinability of Materials, vol. 24, no. 3–4, pp. 280–313, doi: 10.1504/IJMMM.2022.125200. (IF: 1.21, SCOPUS)
L. Mishra, T. R. Mahapatra, D. Mishra, and S. K. Pattanaik, (2022) Machinability Analysis and Multiple Performance Optimization During Laser Micro-drilling of CNT Reinforced Polymer Nanocomposite, Lasers in Manufacturing and Materials Processing., vol. 9, no. 2, pp. 151–172, Jun. 2022, doi: 10.1007/s40516-022-00171-9. (IF: 1.673, SCOPUS)
L. Mishra, T. R. Mahapatra, and D. Mishra, (2022) Performance Evaluation and Sustainability Assessment in Laser Micro-drilling of Carbon Nanotube-Reinforced Polymer Matrix Composite Using MOORA and Whale Optimization Algorithm, Process Integration and Optimization for Sustainability, vol. 6, no. 3, pp. 603–620, doi: 10.1007/s41660-022-00234-6. (IF: 2.39, SCOPUS)
I. Rout, T. R. Mahapatra, S. Sahoo, and D. Mishra, (2022) Dry Sliding Wear Behaviour Of Carbonated Fly Ash Filled Composite, Latin American Applied Research - An international journal, vol. 52 (4), 297-302, doi: 10.52292/j.laar.2022.880. (IF: 0.184, SCIE)
I. Rout, T. R. Mahapatra, and D. Mishra, (2022) Abrasive Jet Machining of Incense Stick Ash Filled Luffa-Human Hair Based Sustainable Bio-composite Using Taguchi Based GRA, Journal of Natural Fibers, vol. 19, no. 16, pp. 15022–15034, doi: 10.1080/15440478.2022.2069631. (IF: 3.507, SCIE)
D. K. Sahu, J. Dandsena, T. R. Mahapatra, and D. Mishra, (2022) Design and Characterization of Progressive Coil Spring for Suspension Systems, Journal of The Institution of Engineers (India): Series C, vol. 103, no. 4, pp. 705–715, doi: 10.1007/s40032-022-00817-9. (IF: 0.311, SCOPUS)
Rout, L. N., Mishra, D., & Swain, P. T. R., (2022). â€œInfluence of Silicon Carbide (SiC) Reinforcement on Sliding and Erosive Wear Characteristics of Glass Fiber/Epoxy Hybrid Compositesâ€, Transactions of the Indian Institute of Metals, pp. 1-9, 2022, doi: https://doi.org/10.1007/s12666-022-02828-7
Purohit, A., Tripathy, V., Mishra, S. K., Swain, P. T. R., & Patnaik, P. K., â€œMechanical and Tribo-performance Analysis of Linz Donawitz Sludge-Filled Glassâ€“Epoxy Composites using Taguchi Experimental Designâ€, Journal of The Institution of Engineers (India): Series E, vol. 103, no. 2, pp. 245-251, 2022, doi: https://doi.org/10.1007/s40034-021-00236-y
Patnaik, P. K., Mishra, S. K., Swain, P. T. R., Purohit, A., Parija, S. K., & Panda, S. S., â€œMulti-objective optimization and experimental analysis of electro-discharge machining parameters via Gray-Taguchi, TOPSIS-Taguchi and PSI-Taguchi methodsâ€, Materials Today: Proceedings, vol. 62, pp. 6189-6198, 2022, doi: https://doi.org/10.1016/j.matpr.2022.05.087
Sagarika Rout and Gyan Ranjan Biswal, “Bidirectional EV Integration in Home Load Energy Management Using Swarm Intelligence,” Int. Journal of Ambient Energy, Taylor & Francis, Vol. 43, pp. 01 – 20, Mar. 2022. DOI: 10.1080/01430750.2022.2059780 (IF: 2.539; CS: 4.8)
Padhi, P. K., et al. "Integrating Soft Skill Training in Professional Courses for Sustainable Employment: An overview" in BOHR International Journal of Social Science and Humanities Research. Vol. 1, No. 1, 2022, p. 17â€“24 DOI: 10.54646/bijsshr.0001
Solar PV Array Fed Single Stage BLDC Motor Drive for Water Pumping System, Distributed Generation & Alternative Energy Journal, 1613-1636, 2022
Grid-connected solar photovoltaic-fed brushless DC motor drive for water pumping system using colliding body optimization technique, Circuit World, Emerald Publishing Limited, 2022
Recent advancement on chromo-fluorogenic sensing of aluminum(III) with Schiff bases. P. Mohanty, R. Behura, V. Bhardwaj, P. P. Dash, S. K. Sahoo and B. R. Jali*, Trends in Environmental Analytical Chemistry. 34 (2022), e00166.
Protein interactions, molecular docking, antimicrobial and antifungal studies of terpyridine ligands. S. Behera, P. P. Dash, A. K. Boshoyi, K. Dash, P. Mohanty, C. R. Sahoo, R. N. Padhy, M. Mishra, B. N. Ghosh, H. Sahoo, B. R. Jali*, Journal of Biomolecular Structure and Dynamics. 2022.
Conformational polymorphs and solvates of 1-(6-aminopyridin2-yl)-3-phenylthiourea. P. Mohanty, A. Mandal. B. Nath and B. R. Jali*, Journal of Molecular Structure, 1261, (2022), 132859.
A Schiff base luminescent chemosensor for selective detection of Zn2+ in aqueous medium. R. Behura, P. P. Dash, P. Mohanty, S. Behera, M. Mohanty, R. Dinda, S. K. Behera, A. K. Barick and B. R. Jali*, Journal of Molecular Structure, 1264, (2022), 133310.
Synthesis and characterization of a novel silver nanoparticles decorated functionalized single-walled carbon nanotubes nanohybrids embedded polyaniline ternary nanocomposites: thermal, dielectric, and sensing properties. L. Shubhadarshinee, P. Mohaptra, B. R. Jali, A. K. Barick and P. Mohapatra, Polymer-Plastics Technology and Materials, 2022.
Fluorescent sensing of water in DMSO by 2,4-dinitrophenyl hydrazine derived Schiff base. R. Behura, S. Behera, P. Mohanty, P. P. Dash, R. Panigrahi, B. S. Mallik, S. K. Sahoo and B. R. Jali*, Journal of Molecular Structure, 1251, (2022), 132086.
Preparation and characterisation of silver nanoparticles/graphene oxide hybrid nanofiller reinforced-polyaniline. L. Subhadarshinee, B. R. Jali, A. K. Barick and P. Mohapatra, Plastics, Rubber and Composites: Plastics, Rubber and Composites: Macromolecular Engineering 51, (2022), 72.
A Brief Review: Antibacterial Activity of Quinone Derivatives. P. Mohanty, S. Sahoo, S. Behera, R. Behura, A. Acharya, D. Biswal, S. K. Suna, R. Sahoo, R. C. Soren and B. R. Jali*, Biointerface Research in Applied Chemistry, 12 (2022), 3247
Anti-bacterial activity of Thiazole and its derivatives: A Review. P. Mohanty, S. Behera, R. Behura, L. Sunhadarshinee, P. Mohapatra, A. K. Barick and B. R. Jali*, Biointerface Research in Applied Chemistry. 12 (2022), 2171.
Antibacterial Properties of Quinoline Derivatives: A MiniReview. S. Behera, P. Mohanty, R. Behura, B. Nath, A. K. Barick and B. R. Jali*, Biointerface Research in Applied Chemistry, 12 (2022), 6078.
Rajesh Yelchuri, Jatindra Kumar Dash, Priyanka Singh, Arunanshu Mahapatro , Sibarama Panigrahi. Exploiting deep and hand-crafted features for texture image retrieval using class membership. Pattern Recognition Letters.Vol. 160,pp. 163-171, 2022.
Radhasyam Patro, Arunanshu Mahapatro and Kwonhue Choi. Effective signal to intrinsic interference plus noise ratio analysis of affine precoded FBMC system. Electronics Letters, IET. vol. 58, no. 9 pp. 375 – 378, 2022.
A comparative study of meta-heuristics for local path planning of a mobile robot
Analysis and prediction of tool wear in dry turning of hardened D3 steel using hybrid insert: A novel wear map approach
Performance Analysis of Hybrid Ceramic Insert in Dry Turning of Hardened Tool Steel
A multiâ€objective approach for local path planning of autonomous mobile robot based on metaheuristics
A comprehensive review on design and analysisof spur gears
D. K. Sethy and P. Patro, Single-phase modeling of nanofluid jet impingement heat transfer, International Journal of Fluid Mechanics Research, 49(6), 47–61 (2022).
R. Ray, A Mohanty, P. Patro and K. Tripathy, Performance enhancement of heat sink with branched and interrupted fins, International Communications in Heat and Mass Transfer, 133, 105945 (2022) .
A. Khuntia. P. Patro and S. Ghosal, Thermal performance analysis of a synthetic jet actuator with moving boundary condition, Journal of Enhanced Heat Transfer, 28(3), 1–18 (2022).
Prusty, R. S., Jena, S. and Panigrahi, R.,2022, Fresh and Hardened properties of Geopolymer Concrete: a Review, Indian Concrete Journal, Scopus, November
Jena, S. and Panigrahi, R.,2022, Study on the Durability and Microstructure of Geopolymer concrete with ferrochrome slag and Silica fume, International Journal of Structural Engineering, Inderscience Scopus, Vol 12(3), pp.302-319
Adaptive differential evolution and pattern search tuned fractional order fuzzy PID for frequency control of power systems
Amit Kumar Behera, Krushna Prasad Shadangi, Prakash Kumar Sarangi. Synthesis of dye-sensitized TiO2/Ag doped nano-composites using UV photoreduction process for phenol degradation: A comparative study. Environmental Pollution 312, (2022) 120019.
Nivedita Patel, Krushna Prasad Shadangi & Praveen Kumar Kar, Pyrolytic oil blended gasoline as future fuel: pyrolysis mechanism, fuel properties, and composition analysis. Environmental Science and Pollution Research 29, (2022) 86400–86417.
Bhaskor J Bora, Thanh Dai Tran, Krushna Prasad Shadangi, Prabhakar Sharma, Zafar Said, Pankaj Kalita, Abdulrajak Buradi, Hakeem Niyas, Minh Tuan Pham, Chau Thanh Nguyen Le, Viet Dung Tran, Xuan Phuong Nguyen. Improving combustion and emission characteristics of a biogas/biodiesel-powered dual-fuel diesel engine through trade-off analysis of operation parameters using response. Sustainable Energy Technologies and Assessments 53, (2022) 102455.
Trinath Biswal, Krushna Prasad Shadangi, Prakash Kumar Sarangi, Rajesh K Srivastava. Conversion of carbon dioxide to methanol: A comprehensive review. Chemosphere 298, (2022) 134299.
Prakash K Sarangi, Thangjam Anand Singh, Ng Joykumar Singh, Krushna Prasad Shadangi, Rajesh K Srivastava, Akhilesh K Singh, Anuj K Chandel, Nidhi Pareek, Vivekanand Vivekanand. Sustainable utilization of pineapple wastes for production of bioenergy, biochemicals and value-added products: A review. Bioresource Technology 351, (2022) 127085.
Nivedita Patel & Krushna Prasad Shadangi. Study the fuel characteristics of ethanol and waste engine oil pyrolytic oil blends. Environmental Science and Pollution Research 29, (2022) 50928–50936.
Latika Bhatia, Prakash Kumar Sarangi, Akhilesh Kumar Singh, Anand Prakash, Krushna Prasad Shadangi. Lignocellulosic waste biomass for biohydrogen production: future challenges and bio?economic perspectives. Biofuels, Bioproducts and Biorefining 16 (3), (2022) 838-858.
Munmi Bhattacharyya, Krushna Prasad Shadangi, Pinakeswar Mahanta, Kaustubha Mohanty. Co?pyrolysis of coal?biomass: study on reaction kinetics and thermodynamics. Biofuels, Bioproducts and Biorefining 16 (3), (2022) 725-742.
Anchal Kumawat and Sucheta Panda, "Noisy Iris Smoothing And Segmentation Scheme Based On Improved Wildes Method", Multidimensional Systems and Signal Processing, Springer, SCIE, SCI, Scopus, Impact Factor – 2.5,Unpaid,Accepted on September 04, 2022, published online on 28 September 2022, vol : 34, Pages:47-79, DOI : https://doi.org/10.1007/s11045-022-00852-w, ISSN: 1573-0824(e_ISSN) 0923-6082(p_ISSN).
Sucheta Panda, P.K.Nanda, â€œColor and Texture Segmentation Using an Unified MRF Model â€, Journal of Computer and Communications,Vol.10,No.6,June 2022. DOI : 10.4236/jcc.2022.106012
Biswaranjan Achrya, Sucheta Panda and Eashwar Sivakumar, â€œAn analytical Study of Multiprocessor Scheduling using Metaheuristic Approach â€, SN Computer Science, Springer, Scopus, Impact Factor- 1.29, Unpaid, Accepted, August 2022, DOI : https://doi.org/10.1007/s42979-022-01398-1.
H.K.Paikray, P.K.Das and S.Panda, â€œ Optimal path planning of Multi-robot in Dynamic environment Using Hybridization of meta-heuristic algorithmâ€, International Journal of Intelligent Robotics and Applications, Springer, Scopus, Impact Factor â€“ 1.81 , Unpaid, Accepted, August, 2022, DOI : https://doi.org/10.1007/s41315-022-00256-w.
L. Subhadarsini, R. R. Dash, M. Mohapatra, and R. L. Sahu, â€˜Equilibrium and kinetic studies on sorption of boron on industrial wastesâ€™, J. Hazard. Toxic Radioact. Waste, vol. 26, no. 1, Jan. 2022. https://doi.org/10.1061/(ASCE)HZ.2153-5515.0000657
R. L. Sahu, R. R. Dash, and P. K. Pradhan, â€˜Laboratory and field studies to assess the effect of hydro geological parameters on coliform removal during river bank filtrationâ€™, J. Hazard. Toxic Radioact. Waste, vol. 26, Apr. 2022. https://doi.org/10.1061/(ASCE)HZ.2153-5515.0000666
R. L. Sahu, R. R. Dash, and P. K. Pradhan, â€˜A study on adsorption of anionic surfactant from water during river bank filtrationâ€™, Journal of Molecular Liquidsâ€™, Aug. 2022. https://doi.org/10.1016/j.molliq.2022.119247
S. Mahapatra, S. Agrawal, P.K. Mishro, and R.B. Pachori, â€œA novel framework for retinal vessel segmentation using optimal improved Frangi filter and adaptive weighted spatial FCM,â€ Computers in Biology and Medicine, Elsevier, vol. 147, p.105770, 2022.
S. Mahapatra, U.R. Jena, S. Dash, S. Agrawal, â€œA modified Coye algorithm for retinal vessel segmentation,â€ Int. J. Computational Vision and Robotics, Inderscience, 2022.
S. Mahapatra, U.R. Jena, S. Dash, â€œMean global based on hysteresis thresholding for retinal blood vessel segmentation using enhanced homomorphic filtering,â€ Multimedia Tools and Applications, Springer, p. 1-18, 2022.
S. Mahapatra, and S. Agrawal, â€œAn optimal statistical featureâ€based transformation function for enhancement of retinal images using adaptive enhanced leader particle swarm optimization,â€ International Journal of Imaging Systems and Technology, Wiley, 2022.
Sarojrani Pattnaik, Mihir Kumar Sutar(2022). Investigation on the influence of polyethylene wax powder on the characteristics of ceramic shells used for investment casting. Silicon, vol. 14(11), pp. 6089-6096.https://doi.org/10.1007/s12633-021-01386-9. SCIE, IF - 2.8.
Yao, S.W., Behera, S., Inc, M., Rezazadeh, H., Virdi, J.P.S., Mahmoud, W., Arqub, O.A. and Osman, M.S.: Analytical solutions of conformable Drinfel’d–Sokolov–Wilson and Boiti Leon Pempinelli equations via sine–cosine method, Results Phys., 42 105990 (2022). https://doi.org/10.1016/j.rinp.2022.105990 (SCI, I/F-5.3, Cite Score-8.7)
Behera S, Aljahdaly NH, Virdi, JPS. On the modified $(fr{G'}{G^2})$-expansion method for finding some analytical solutions of the traveling waves, J Ocean Eng Sci. 2022;7(4):313-320. https://doi.org/10.1016/j.joes.2021.08.013 (SCIE, I/F-7.1, Cite Score-11.5)
1Unsteady EMHD free convective second grade fluid flow past an exponentially accelerated vertical porous plate (S. Padhi & I. Nayak), Numerical Heat Transfer, part B: Fundamentals, Taylor and Francis group, 1-18, ISSN No. 1521-0626
"Energy-efficient cloud integrated sensor based on clustering and multihop transmission", Kalyan Das & Satyabrata Das,Â Science, Engineering and Health Studies(Scopus), Volume 16, 2022, ISSN (Online): 2630-0087, https://li01.tci-thaijo.org/index.php/sehs/article/view/247889
"Constrained-Based Power Management Algorithm for Green Cloud Computing", Sanjib Kumar Nayak, Sanjaya Kumar Panda & Satyabrata Das, International Journal of Computational Science and Engineering(Scopus), Inderscience, pp 657-667, https://doi.org/10.1504/IJCSE.2022.127187
"A Multi-Objective Renewable Energy-Based Algorithm for Geographically Distributed Datacenters", Sanjib Kumar Nayak, Sanjaya Kumar Panda, Satyabrata Das, Sohan Kumar Pande, International Journal of Embedded Systems(Scopus), Inderscience, 2022, 15(2), pp. 119-131, https://doi.org/10.1504/IJES.2022.123304
"Energy-Efficient Cloud integrated Sensor Network Model Based on Data Forecasting through ARIMA",Kalyan Das & Satyabrata Das, International Journal of e-Collaboration,igi-global 2021,(ESCI)(Scopus), Volume 18, Issue 1, Article 6, DOI: 10.4018/IJeC.290292
"Minimization of Energy Holes with Lively Bonding and the Division of Coverage", Chinmaya Ku. Nayak & Satyabrata Das, International Journal of e-Collaboration, igi-global 2021, (ESCI) (Scopus), Volume 18, Issue 2, Article 5, DOI: 10.4018/IJeC.304031
A. K. Behera, D. Mishra, S. Nallusamy, D. Konhar, S. N. Mishra, “Fibonacci Series-Motivated Sequential-Elliptical-Pyramid Slotted Microstrip Antenna with C-Band and X-Band Isolation Features” International Journal of Engineering Trends and Technology, 2022, 70(8), pp. 118–125. (SCOPUS)
D. Konhar, A. K. Behera, S. N. Mishra, D. Mishra, "A High Gain Elliptical Slot Antenna for Lower C-band and X-band Application", Journal of King Saud University -Engineering Sciences, Volume 34, Issue 2, pp108-115, February 2022. (SCOPUS)
Chaudhary, Bhawesh K; Agrawal, Sanjay; Mishro, Pranaba K; Panda, Rutuparna; , An error sensitive fuzzy clustering technique for mammogram image segmentation, International Conference on Intelligent Systems Design and Applications, Pages 297-307, Springer Nature Switzerland Cham
Das, Gyanesh; Swain, Monorama; Panda, Rutuparna; Naik, Manoj K; Agrawal, Sanjay; , A non-entropy based optimal multilevel threshold selection technique forCOVID-19 X-ray images using chance based birdsâ€™ intelligence, nan
Sa, Bijay Kumar; Panda, Rutuparna; Agrawal, Sanjay; , Active Contour with Adaptive Timestep for Brain Tumor Segmentation, 2022 IEEE 7th International conference for Convergence in Technology (I2CT), Pages 1-6, IEEE
Panda, Rutuparna; Swain, Monorama; Naik, Manoj Kumar; Agrawal, Sanjay; Abraham, Ajith; , A novel practical decisive row-class entropy-based technique for multilevel threshold selection using opposition flow directional algorithm, IEEE Access, Volume 10.0, Pages 110473-110484, IEEE
Mahapatra, Sakambhari; Agrawal, Sanjay; Mishro, Pranaba K; Pachori, Ram Bilas; , A novel framework for retinal vessel segmentation using optimal improved frangi filter and adaptive weighted spatial FCM, Computers in Biology and Medicine, Volume 147.0, Pages 105770, Pergamon
Das, Gyanesh; Panda, Rutuparna; Agrawal, Sanjay; , Slime Mould-Seagull Optimizer, 2022 IEEE 7th international conference for convergence in technology (I2CT), Pages 1-7, IEEE
Prusty, Sheetal; Panda, Rutuparna; Dora, Lingraj; Agrawal, Sanjay; , A Study on Brain Tumor Analysis Using Deep Learning Methods, 2022 6th International Conference on Computing Methodologies and Communication (ICCMC), Pages 1106-1111, IEEE
Mahapatra, Sakambhari; Agrawal, Sanjay; , An optimal statistical feature based transformation function for enhancement of retinal images using adaptive enhanced leader particle swarm optimization, International Journal of Imaging Systems and Technology, Pages 1-21, John Wiley & Sons, Inc.
Parida, Prasanta Kumar; Dora, Lingraj; Swain, Monorama; Agrawal, Sanjay; Panda, Rutuparna; , Data science methodologies in smart healthcare: A review, Health and Technology, Volume 12.0, Number 2, Pages 329-344, Springer Berlin Heidelberg Berlin/Heidelberg
Das, G; Panda, R; Samantaray, L; Agrawal, S; , A Novel Non-Entropic Objective Function for Multilevel Optimal Threshold Selection Using Adaptive Equilibrium Optimizer., Iranian Journal of Electrical & Electronic Engineering, Volume 18.0, Number 2
Meher, Bikash; Agrawal, Sanjay; Panda, Rutuparna; Abraham, Ajith; , A region based remote sensing image fusion using anisotropic diffusion process, International Journal of Image and Data Fusion, Volume 13.0, Number 3, Pages 219-243, Taylor & Francis
Dora, Lingraj; Agrawal, Sanjay; Panda, Rutuparna; Abraham, Ajith; , An efficient multiclass classifier for classification of Alzheimer's disease/mild cognitive impairment/Normal subjects, International Journal of Imaging Systems and Technology, Volume 32.0, Number 2, Pages 629-641, John Wiley & Sons, Inc. Hoboken, USA
Swain, Monorama; Tripathy, Tanmaya Tapaswini; Panda, Rutuparna; Agrawal, Sanjay; Abraham, Ajith; , Differential exponential entropy-based multilevel threshold selection methodology for colour satellite images using equilibrium-cuckoo search optimizer, Engineering Applications of Artificial Intelligence, Volume 109.0, Pages 104599, Elsevier
Agrawal, Sanjay; Panda, Rutuparna; Choudhury, Pratiksha; Abraham, Ajith; , Dominant color component and adaptive whale optimization algorithm for multilevel thresholding of color images, Knowledge-Based Systems, Volume 240.0, Pages 108172, Elsevier
Meher, Bikash; Agrawal, Sanjay; Panda, Rutuparna; Dora, Lingraj; Abraham, Ajith; , Visible and infrared image fusion using an efficient adaptive transition region extraction technique, Engineering Science and Technology, an International Journal, Volume 29.0, Pages 101037, Elsevier
Agrawal, Sanjay; Panda, Rutuparna; Mishro, Pranaba K; Abraham, Ajith; , A novel joint histogram equalization based image contrast enhancement, Journal of King Saud University-Computer and Information Sciences, Volume 34.0, Number 4, Pages 1172-1182, Elsevier
Pradhan, P.; Dwibedi, S.; Pradhan, M.; Panda, S.; Panigrahi, S. K. (2022): Durability characteristics of geopolymer concrete-Progress and perspectives. Journal of Building Engineering, Elsevier (SCIE, IF-7.144), 59, 105100. https://doi.org/10.1016/j.jobe.2022.105100.
Pradhan, P.; Panda, S.; Parhi, S. K.; Panigrahi, S. K. (2022): Factors affecting production and properties of self-compacting geopolymer concrete-A review. Construction and Building Materials, Elsevier (SCIE, IF-7.693), 344, 128174. https://doi.org/10.1016/j.conbuildmat.2022.128174.
Pradhan, P.; Panda, S.; Parhi, S. K.; Panigrahi, S. K. (2022): Effect of critical parameters on the fresh properties of Self Compacting geopolymer concrete. Materials Today: Proceedings, Elsevier (Scopus), 62(12), 6325-6335. https://doi.org/10.1016/j.matpr.2022.02.506.
Pradhan, P.; Panda, S.; Parhi, S. K.; Panigrahi, S. K. (2022): Variation in fresh and mechanical properties of GGBFS based self-compacting geopolymer concrete in the presence of NCA and RCA. Materials Today: Proceedings, Elsevier, 62(12), 6348-6358. https://doi.org/10.1016/j.matpr.2022.03.337.
Mohanty, L.; Panigrahi, S. K.; Patnaik, M. (2022): Assessment of Water Quality of Mahanadi Basin using Statistical and Wavelet Techniques. Materials Today: Proceedings, Elsevier, 62(12), 6371-6378. https://doi.org/10.1016/j.matpr.2022.03.381.
Behera, H. K..; Das, S. S.; Giri, D; Panigrahi (2022): Application of ANN for evaluating WMA marshall parameters. Materials Today: Proceedings, Elsevier, 62(12), 6708-6721. https://doi.org/10.1016/j.matpr.2022.04.759.
Oram, E., Naik, B., Bhoi, G., & Pelusi, D. (2022). Heart Failure Detection from Clinical and Lifestyle Information using Optimized XGBoost with Gravitational Search Algorithm. In Nature-Inspired Optimization Methodologies in Biomedical and Healthcare (pp. 97-112). Cham: Springer International Publishing.
Bhoi, G., Oram, E., Naik, B., & Pelusi, D. (2022). Optimized Gradient Boosting Tree-Based Model for Obesity Level Prediction from patient’s Physical Condition and Eating Habits. In Nature-Inspired Optimization Methodologies in Biomedical and Healthcare (pp. 49-69). Cham: Springer International Publishing.
Oram, E., Naik, B., & Senapati, M. R. (2022). Identification of malicious access in IoT network from connection traces by using light gradient boosting machine. In Computational Intelligence in Data Mining: Proceedings of ICCIDM 2021 (pp. 711-720). Singapore: Springer Nature Singapore.
Bhoi, G., Naik, B., Oram, E., & Vimal, S. (2022, April). Gravitational search optimized light gradient boosting machine for identification of malicious access in IoT network. In International Conference on Computational Intelligence in Pattern Recognition (pp. 570-579). Singapore: Springer Nature Singapore.
Oram, E., Naik, B., Senapati, M. R., & Bhoi, G. (2022, April). Identification of Malicious Access in IoT Network by Using Artificial Physics Optimized Light Gradient Boosting Machine. In International Conference on Computational Intelligence in Pattern Recognition (pp. 653-662). Singapore: Springer Nature Singapore.
K. K. Sahu, S. C. Nayak, and H. S. Behera, â€œExtreme Learning With Metaheuristic Optimization for Exchange Rate Forecasting,â€ International Journal of Swarm Intelligence Research (IJSIR), vol. 13, no. 1, pp. 1â€“25, 2022
Venkatanarayana, P.; Kolli, D.; Seelama, N. V.; Ramakrishna, D. S. Synthesis of Molnupiravir (MK-4482, EIDD-2801): A Promising Oral Drug for the Treatment of COVID-19 Starting from Cytidine. Nucleosides, Nucleotides & Nucleic Acids, 2022, 42, 427–435. https://doi.org/10.1080/15257770.2022.2153140. (SCI & SCOPUS)
Udayasri, A.; Chandrasekhar, M., M.; Naga, B., M. V.; Varanasi, G.; Ramakrishna, D. S. Green Chemical Principles Based Regioselective Functionalization of 2,4,6-Trichloropyrimidine-5-Carbaldehyde: Application in the Synthesis of New Pyrimidines and Pyrrolopyrimidine. Journal of the Serbian Chemical Society, 2023, 88, 1–9. https://doi.org/10.2298/jsc210804063u. (SCI & SCOPUS)
Veligeti, R.; Anireddy, J. S.; Madhu, R. B.; Ramakrishna, D. S. One Pot, Three Component Synthesis of Fluoro and Trifluoromethyl Substituted Unsymmetrical Dihydropyrazine Fused Acridine-3-Carboxamide Using Renewable 2-MeTHF Solvent and Their DFT Studies. Journal of Fluorine Chemistry, 2022, 261–262, 110019. https://doi.org/10.1016/j.jfluchem.2022.110019. (SCI & SCOPUS)
Veligeti, R.; Ramakrishna, D. S.; Madhu, R. B.; Anireddy, J. S. Synthesis of Fluoro and Trifluoromethyl Substituents Containing Novel Tetracyclic N-Benzylated Benzopiperazine Fused Acridone Regioisomers Using a Greener Solvent 2-MeTHF and Their DFT Studies. Journal of Fluorine Chemistry, 2022, 257–258, 109989. https://doi.org/10.1016/j.jfluchem.2022.109989. (SCI & SCOPUS)
Udayasri, A.; Chandrasekhar, M. M.; Brahmeswararao, M. V. N.; Varanasi, G.; Praveen, P. L.; Ramakrishna, D. S. Ecofriendly Synthesis of Ribociclib Intermediate Using Regioselective Hydrodechlorination and DMAP Catalyzed Ester Hydrolysis. Topics in Catalysis, 2022, 65, 1669–1674. https://doi.org/10.1007/s11244-022-01602-9. (SCI & SCOPUS)
Ramakrishna, D. S. Preparation of Novel Chiral ?-Diazocarbonyl Compounds Using Regitz’s Methodology. Organic Preparations and Procedures International, 2022, 54, 178–183. https://doi.org/10.1080/00304948.2021.2010466. (SCI & SCOPUS)
Sk. Nazrul, L. Behera, R. K. Singh, A. Biswal, S. K. Swain* â€œCombined Effect of Layered Double Hydroxides and Nano silver on Bacterial Inhibition and Gas Barrier Properties of Chitosan Grafted Polyacrylonitrile Nanocompositesâ€ Polymer-Plastic Technology and Materials, 1-11, (Tylor & Francis), (2022). (Impact Factor: 2.439) ISSN: 2574-089X DOI: 10.1080/25740881.2022.2086814.
P. K. Sethy, A. Biswal, P. Mohapatra, and S K Swain* â€œNano BN reinforced cellulose-based tripolymeric hybrid nanocomposites as packaging materialsâ€ Polymer-Plastic Technology and Materials, 1-11, (Tylor & Francis), (2022). (Impact Factor: 2.439) ISSN: 2574-089X. DOI: 10.1080/25740881.2022.2044048.
B. Parhi, D. Bharatiya, and S K Swain* â€œEffect of polycaprolactone on physicochemical, biological, and mechanical properties of polyethylene oxide and polyamino acids nano block copolymersâ€ Journal of Applied Polymer Science (Wiley), (2022). (Impact Factor: 3.125) ISSN: 1097-4628. DOI: 10.1002/app.20213091.
S. Sahu and S. Behera, “A review on modern control applications in wind energy conversion system,” Energy & Environment, vol.33, issue 2, pp.1-40, 2022, (SSCI/Scopus) DOI: https://doi.org/10.1177/0958305X21995929 ISSN: 2048-4070 IF 4.2
S. Sahu, S. Behera, “Comparison of adaptive pitch control strategies for a wind turbine benchmark model,” World Journal of Engineering. 2022 Apr 1. (ESCI/Scopus) DOI: https://doi.org/10.1108/WJE-07-2021-0450 ISSN: 1708-5284
S. Behera, S.S. Bhoi, A. Mishra, S.S. Nayak, S.K. Panda, S.S. Patnaik, “Comparative Study of Convolutional Neural Network and Long Short-Term Memory Network for Solar Irradiance Forecasting,” Journal of Engineering Science and Technology, vol. 17, no. 3, pp.1845-56, 2022. (ESCI/Scopus) https://jestec.taylors.edu.my/Vol%2017%20Issue%203%20June%202022/17_3_17.pdf ISSN: 1823-4690
S. Sahu and S. Behera, “Self-tuning proportional-derivative pitch control for internal fault-tolerance in wind turbine benchmark,” Australian Journal of Electrical and Electronics Engineering, pp. 1-15, 2022. (Scopus) DOI: https://doi.org/10.1080/1448837X.2022.2125974. ISSN: 2205-362X
A. Patnaik, S.K. Padhan and R.N. Mohapatra, Sufficient conditions for extremum of fractional variational problems, RAIRO - Operations Research, 56 (2022) 637-648.
S. Gadtia and S.K. Padhan, A note on machine method for root extraction, Boletim da Sociedade Paranaense de Matemática, 40 , (2022) 1-6.
Deepak K Mohapatra, Chitta R Deo, Punyapriya Mishra, Kiran K Ekka, Chandrakanta Mishra, “Mechanical characterization of kenaf/glass fibre hybrid composite laminates: An experimental and numerical approach”, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089221136813
Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, “Investigation of glass fiber influence on mechanical characteristics of natural fiber reinforced polyester composites: an experimental and numerical approach”, Composites theory and practice, 22: 3, 123-129
Swagatika Mishra, Punyapriya Mishra, “ Synthesis and characterization of CCTO0.5 BT0.5/epoxy hybrid ceramic polymer composite for electronic applications” Materials Today: Proceedings, Volume 67, Part 2, Pages 372-376
Sarada Prasanna Sahoo, Bikramaditya Das, B.B.Pati,(2022). “Path planning of auv swarms using a bio-inspiredmulti-agent system”. ECTI Transactions on Electrical Engineering, Electronics, and Communications,20(3), pp. 315–328.
Manasi Mishra and J.P. Panda, “Soret effect for unsteady MHD Mixed convective flow in porous medium with viscous dissipation “, International Journal of Ambient Energy, vol.43, no.1, pp., 5605-5615, 2021, doi: 10.1080/ 01430750.2021.1969271,
Available: https://doi.org/10.1080/01430750.2021.1969271
L. Panigrahi, D. Kumar and J. P. Panda, “Impact of chemical reaction, hall current, and radiation on MHD flow between vertical walls”, Journal of Engineering Thermophysics , vol. 30, no.1, pp.122-144, 2021, doi: 10.1134/s1810232821010100,
Available: https://doi.org/10.1134/s1810232821010100
L. Panigrahi, J. Panda, S. S. Sahoo, “Unsteady heat transfer and entropy generation study on viscoelastic fluid flow coupled with induced magnetic field”, Iranian Journal of Science and Technology, Transactions A: Science, vol.45, no.5, pp. 1699-1710, 2021, Available: https://doi.org/10.1007/s40995-021-01126-z
Das, A., Padhan, S., Das, S. R., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2021). Performance assessment and chip morphology evaluation of austenitic stainless steel under sustainable machining conditions. Metals, 11(12), 1931.
Dash, L., Padhan, S., Das, A., & Das, S. R. (2021). Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2021). Analysis on surface integrity and sustainability assessment in electrical discharge machining of engineered Al–22% SiC metal matrix composite. Revista de Metalurgia, 57(4), e210.
Pradhan, S., Das, S. R., & Dhupal, D. (2021). Performance evaluation of recently developed HAJM process during machining of hardstone quartz using hot silicon carbide abrasives. Silicon, 13(9), 2895–2919.
Parida, S. P., Jena, P. C., & Das, S. R. (2021). Comparative stress analysis of suitable biomaterials for artificial hip joint and femur bone using finite element simulation. Advances in Materials and Processing Technologies.
Elsheikh, A. H., Abd Elaziz, M., Das, S. R., Muthuramalingam, T., & Lu, S. (2021). A new optimized predictive model based on political optimizer for eco-friendly MQL turning of AISI 4340 alloy with nano-lubricants. Journal of Manufacturing Processes, 67, 562–578.
Naik, S., Das, S. R., & Dhupal, D. (2021). Experimental investigation, predictive modeling, parametric optimization, and cost analysis in electrical discharge machining of Al–SiC metal matrix composite. Silicon, 13(4), 1017–1040.
Behera, R. K., Samal, B. P., Panigrahi, S. C., & Das, S. R. (2021). Optimization of erosion wear of Al–Mg–Si–Cu–SiC composite produced by powder metallurgy method. Corrosion Reviews, 39(1), 63–75.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2021). Machining of hardstone quartz with modified AJM process using hot SiC abrasives: Analysis, modeling, optimization, and cost analysis. Surface Review and Letters, 28(02), 2050049.
Padhan, S., Das, A., Santoshwar, A., Dharmendrabhai, T. R., & Das, S. R. (2021). Sustainability assessment and machinability investigation of austenitic stainless steel in finish turning using SiAlON ceramic tool under different cutting conditions. Silicon, 13(1), 119–147.
Pradhan, S., Sahu, S., Das, S. R., & Dhupal, D. (2021). Experimental study and simulation of surface generation during machining of K-80 alumina ceramic using modified abrasive jet machining. International Journal of Abrasive Technology, 10(4), 298–329.
Das, A., Padhan, S., Das, S. R., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2021). Performance assessment and chip morphology evaluation of austenitic stainless steel under sustainable machining conditions. Metals, 11(12), 1931.
Dash, L., Padhan, S., Das, A., & Das, S. R. (2021). Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2021). Analysis on surface integrity and sustainability assessment in electrical discharge machining of engineered Al–22% SiC metal matrix composite. Revista de Metalurgia, 57(4), e210.
Pradhan, S., Das, S. R., & Dhupal, D. (2021). Performance evaluation of recently developed HAJM process during machining of hardstone quartz using hot silicon carbide abrasives. Silicon, 13(9), 2895–2919.
Parida, S. P., Jena, P. C., & Das, S. R. (2021). Comparative stress analysis of suitable biomaterials for artificial hip joint and femur bone using finite element simulation. Advances in Materials and Processing Technologies.
Elsheikh, A. H., Abd Elaziz, M., Das, S. R., Muthuramalingam, T., & Lu, S. (2021). A new optimized predictive model based on political optimizer for eco-friendly MQL turning of AISI 4340 alloy with nano-lubricants. Journal of Manufacturing Processes, 67, 562–578.
Naik, S., Das, S. R., & Dhupal, D. (2021). Experimental investigation, predictive modeling, parametric optimization, and cost analysis in electrical discharge machining of Al–SiC metal matrix composite. Silicon, 13(4), 1017–1040.
Behera, R. K., Samal, B. P., Panigrahi, S. C., & Das, S. R. (2021). Optimization of erosion wear of Al–Mg–Si–Cu–SiC composite produced by powder metallurgy method. Corrosion Reviews, 39(1), 63–75.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2021). Machining of hardstone quartz with modified AJM process using hot SiC abrasives: Analysis, modeling, optimization, and cost analysis. Surface Review and Letters, 28(02), 2050049.
Padhan, S., Das, A., Santoshwar, A., Dharmendrabhai, T. R., & Das, S. R. (2021). Sustainability assessment and machinability investigation of austenitic stainless steel in finish turning using SiAlON ceramic tool under different cutting conditions. Silicon, 13(1), 119–147.
Pradhan, S., Sahu, S., Das, S. R., & Dhupal, D. (2021). Experimental study and simulation of surface generation during machining of K-80 alumina ceramic using modified abrasive jet machining. International Journal of Abrasive Technology, 10(4), 298–329.
Das, A., Padhan, S., Das, S. R., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2021). Performance assessment and chip morphology evaluation of austenitic stainless steel under sustainable machining conditions. Metals, 11(12), 1931.
Dash, L., Padhan, S., Das, A., & Das, S. R. (2021). Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2021). Analysis on surface integrity and sustainability assessment in electrical discharge machining of engineered Al–22% SiC metal matrix composite. Revista de Metalurgia, 57(4), e210.
Pradhan, S., Das, S. R., & Dhupal, D. (2021). Performance evaluation of recently developed HAJM process during machining of hardstone quartz using hot silicon carbide abrasives. Silicon, 13(9), 2895–2919.
Parida, S. P., Jena, P. C., & Das, S. R. (2021). Comparative stress analysis of suitable biomaterials for artificial hip joint and femur bone using finite element simulation. Advances in Materials and Processing Technologies.
Elsheikh, A. H., Abd Elaziz, M., Das, S. R., Muthuramalingam, T., & Lu, S. (2021). A new optimized predictive model based on political optimizer for eco-friendly MQL turning of AISI 4340 alloy with nano-lubricants. Journal of Manufacturing Processes, 67, 562–578.
Naik, S., Das, S. R., & Dhupal, D. (2021). Experimental investigation, predictive modeling, parametric optimization, and cost analysis in electrical discharge machining of Al–SiC metal matrix composite. Silicon, 13(4), 1017–1040.
Behera, R. K., Samal, B. P., Panigrahi, S. C., & Das, S. R. (2021). Optimization of erosion wear of Al–Mg–Si–Cu–SiC composite produced by powder metallurgy method. Corrosion Reviews, 39(1), 63–75.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2021). Machining of hardstone quartz with modified AJM process using hot SiC abrasives: Analysis, modeling, optimization, and cost analysis. Surface Review and Letters, 28(02), 2050049.
Padhan, S., Das, A., Santoshwar, A., Dharmendrabhai, T. R., & Das, S. R. (2021). Sustainability assessment and machinability investigation of austenitic stainless steel in finish turning using SiAlON ceramic tool under different cutting conditions. Silicon, 13(1), 119–147.
Pradhan, S., Sahu, S., Das, S. R., & Dhupal, D. (2021). Experimental study and simulation of surface generation during machining of K-80 alumina ceramic using modified abrasive jet machining. International Journal of Abrasive Technology, 10(4), 298–329.
Das, A., Padhan, S., Das, S. R., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2021). Performance assessment and chip morphology evaluation of austenitic stainless steel under sustainable machining conditions. Metals, 11(12), 1931.
Dash, L., Padhan, S., Das, A., & Das, S. R. (2021). Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2021). Analysis on surface integrity and sustainability assessment in electrical discharge machining of engineered Al–22% SiC metal matrix composite. Revista de Metalurgia, 57(4), e210.
Pradhan, S., Das, S. R., & Dhupal, D. (2021). Performance evaluation of recently developed HAJM process during machining of hardstone quartz using hot silicon carbide abrasives. Silicon, 13(9), 2895–2919.
Parida, S. P., Jena, P. C., & Das, S. R. (2021). Comparative stress analysis of suitable biomaterials for artificial hip joint and femur bone using finite element simulation. Advances in Materials and Processing Technologies.
Elsheikh, A. H., Abd Elaziz, M., Das, S. R., Muthuramalingam, T., & Lu, S. (2021). A new optimized predictive model based on political optimizer for eco-friendly MQL turning of AISI 4340 alloy with nano-lubricants. Journal of Manufacturing Processes, 67, 562–578.
Naik, S., Das, S. R., & Dhupal, D. (2021). Experimental investigation, predictive modeling, parametric optimization, and cost analysis in electrical discharge machining of Al–SiC metal matrix composite. Silicon, 13(4), 1017–1040.
Behera, R. K., Samal, B. P., Panigrahi, S. C., & Das, S. R. (2021). Optimization of erosion wear of Al–Mg–Si–Cu–SiC composite produced by powder metallurgy method. Corrosion Reviews, 39(1), 63–75.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2021). Machining of hardstone quartz with modified AJM process using hot SiC abrasives: Analysis, modeling, optimization, and cost analysis. Surface Review and Letters, 28(02), 2050049.
Padhan, S., Das, A., Santoshwar, A., Dharmendrabhai, T. R., & Das, S. R. (2021). Sustainability assessment and machinability investigation of austenitic stainless steel in finish turning using SiAlON ceramic tool under different cutting conditions. Silicon, 13(1), 119–147.
Pradhan, S., Sahu, S., Das, S. R., & Dhupal, D. (2021). Experimental study and simulation of surface generation during machining of K-80 alumina ceramic using modified abrasive jet machining. International Journal of Abrasive Technology, 10(4), 298–329.
Das, A., Padhan, S., Das, S. R., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2021). Performance assessment and chip morphology evaluation of austenitic stainless steel under sustainable machining conditions. Metals, 11(12), 1931.
Dash, L., Padhan, S., Das, A., & Das, S. R. (2021). Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2021). Analysis on surface integrity and sustainability assessment in electrical discharge machining of engineered Al–22% SiC metal matrix composite. Revista de Metalurgia, 57(4), e210.
Pradhan, S., Das, S. R., & Dhupal, D. (2021). Performance evaluation of recently developed HAJM process during machining of hardstone quartz using hot silicon carbide abrasives. Silicon, 13(9), 2895–2919.
Parida, S. P., Jena, P. C., & Das, S. R. (2021). Comparative stress analysis of suitable biomaterials for artificial hip joint and femur bone using finite element simulation. Advances in Materials and Processing Technologies.
Elsheikh, A. H., Abd Elaziz, M., Das, S. R., Muthuramalingam, T., & Lu, S. (2021). A new optimized predictive model based on political optimizer for eco-friendly MQL turning of AISI 4340 alloy with nano-lubricants. Journal of Manufacturing Processes, 67, 562–578.
Naik, S., Das, S. R., & Dhupal, D. (2021). Experimental investigation, predictive modeling, parametric optimization, and cost analysis in electrical discharge machining of Al–SiC metal matrix composite. Silicon, 13(4), 1017–1040.
Behera, R. K., Samal, B. P., Panigrahi, S. C., & Das, S. R. (2021). Optimization of erosion wear of Al–Mg–Si–Cu–SiC composite produced by powder metallurgy method. Corrosion Reviews, 39(1), 63–75.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2021). Machining of hardstone quartz with modified AJM process using hot SiC abrasives: Analysis, modeling, optimization, and cost analysis. Surface Review and Letters, 28(02), 2050049.
Padhan, S., Das, A., Santoshwar, A., Dharmendrabhai, T. R., & Das, S. R. (2021). Sustainability assessment and machinability investigation of austenitic stainless steel in finish turning using SiAlON ceramic tool under different cutting conditions. Silicon, 13(1), 119–147.
Pradhan, S., Sahu, S., Das, S. R., & Dhupal, D. (2021). Experimental study and simulation of surface generation during machining of K-80 alumina ceramic using modified abrasive jet machining. International Journal of Abrasive Technology, 10(4), 298–329.
Das, A., Padhan, S., Das, S. R., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2021). Performance assessment and chip morphology evaluation of austenitic stainless steel under sustainable machining conditions. Metals, 11(12), 1931.
Dash, L., Padhan, S., Das, A., & Das, S. R. (2021). Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2021). Analysis on surface integrity and sustainability assessment in electrical discharge machining of engineered Al–22% SiC metal matrix composite. Revista de Metalurgia, 57(4), e210.
Pradhan, S., Das, S. R., & Dhupal, D. (2021). Performance evaluation of recently developed HAJM process during machining of hardstone quartz using hot silicon carbide abrasives. Silicon, 13(9), 2895–2919.
Parida, S. P., Jena, P. C., & Das, S. R. (2021). Comparative stress analysis of suitable biomaterials for artificial hip joint and femur bone using finite element simulation. Advances in Materials and Processing Technologies.
Elsheikh, A. H., Abd Elaziz, M., Das, S. R., Muthuramalingam, T., & Lu, S. (2021). A new optimized predictive model based on political optimizer for eco-friendly MQL turning of AISI 4340 alloy with nano-lubricants. Journal of Manufacturing Processes, 67, 562–578.
Naik, S., Das, S. R., & Dhupal, D. (2021). Experimental investigation, predictive modeling, parametric optimization, and cost analysis in electrical discharge machining of Al–SiC metal matrix composite. Silicon, 13(4), 1017–1040.
Behera, R. K., Samal, B. P., Panigrahi, S. C., & Das, S. R. (2021). Optimization of erosion wear of Al–Mg–Si–Cu–SiC composite produced by powder metallurgy method. Corrosion Reviews, 39(1), 63–75.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2021). Machining of hardstone quartz with modified AJM process using hot SiC abrasives: Analysis, modeling, optimization, and cost analysis. Surface Review and Letters, 28(02), 2050049.
Padhan, S., Das, A., Santoshwar, A., Dharmendrabhai, T. R., & Das, S. R. (2021). Sustainability assessment and machinability investigation of austenitic stainless steel in finish turning using SiAlON ceramic tool under different cutting conditions. Silicon, 13(1), 119–147.
Pradhan, S., Sahu, S., Das, S. R., & Dhupal, D. (2021). Experimental study and simulation of surface generation during machining of K-80 alumina ceramic using modified abrasive jet machining. International Journal of Abrasive Technology, 10(4), 298–329.
Das, A., Padhan, S., Das, S. R., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2021). Performance assessment and chip morphology evaluation of austenitic stainless steel under sustainable machining conditions. Metals, 11(12), 1931.
Dash, L., Padhan, S., Das, A., & Das, S. R. (2021). Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2021). Analysis on surface integrity and sustainability assessment in electrical discharge machining of engineered Al–22% SiC metal matrix composite. Revista de Metalurgia, 57(4), e210.
Pradhan, S., Das, S. R., & Dhupal, D. (2021). Performance evaluation of recently developed HAJM process during machining of hardstone quartz using hot silicon carbide abrasives. Silicon, 13(9), 2895–2919.
Parida, S. P., Jena, P. C., & Das, S. R. (2021). Comparative stress analysis of suitable biomaterials for artificial hip joint and femur bone using finite element simulation. Advances in Materials and Processing Technologies.
Elsheikh, A. H., Abd Elaziz, M., Das, S. R., Muthuramalingam, T., & Lu, S. (2021). A new optimized predictive model based on political optimizer for eco-friendly MQL turning of AISI 4340 alloy with nano-lubricants. Journal of Manufacturing Processes, 67, 562–578.
Naik, S., Das, S. R., & Dhupal, D. (2021). Experimental investigation, predictive modeling, parametric optimization, and cost analysis in electrical discharge machining of Al–SiC metal matrix composite. Silicon, 13(4), 1017–1040.
Behera, R. K., Samal, B. P., Panigrahi, S. C., & Das, S. R. (2021). Optimization of erosion wear of Al–Mg–Si–Cu–SiC composite produced by powder metallurgy method. Corrosion Reviews, 39(1), 63–75.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2021). Machining of hardstone quartz with modified AJM process using hot SiC abrasives: Analysis, modeling, optimization, and cost analysis. Surface Review and Letters, 28(02), 2050049.
Padhan, S., Das, A., Santoshwar, A., Dharmendrabhai, T. R., & Das, S. R. (2021). Sustainability assessment and machinability investigation of austenitic stainless steel in finish turning using SiAlON ceramic tool under different cutting conditions. Silicon, 13(1), 119–147.
Pradhan, S., Sahu, S., Das, S. R., & Dhupal, D. (2021). Experimental study and simulation of surface generation during machining of K-80 alumina ceramic using modified abrasive jet machining. International Journal of Abrasive Technology, 10(4), 298–329.
Das, A., Padhan, S., Das, S. R., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2021). Performance assessment and chip morphology evaluation of austenitic stainless steel under sustainable machining conditions. Metals, 11(12), 1931.
Dash, L., Padhan, S., Das, A., & Das, S. R. (2021). Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2021). Analysis on surface integrity and sustainability assessment in electrical discharge machining of engineered Al–22% SiC metal matrix composite. Revista de Metalurgia, 57(4), e210.
Pradhan, S., Das, S. R., & Dhupal, D. (2021). Performance evaluation of recently developed HAJM process during machining of hardstone quartz using hot silicon carbide abrasives. Silicon, 13(9), 2895–2919.
Parida, S. P., Jena, P. C., & Das, S. R. (2021). Comparative stress analysis of suitable biomaterials for artificial hip joint and femur bone using finite element simulation. Advances in Materials and Processing Technologies.
Elsheikh, A. H., Abd Elaziz, M., Das, S. R., Muthuramalingam, T., & Lu, S. (2021). A new optimized predictive model based on political optimizer for eco-friendly MQL turning of AISI 4340 alloy with nano-lubricants. Journal of Manufacturing Processes, 67, 562–578.
Naik, S., Das, S. R., & Dhupal, D. (2021). Experimental investigation, predictive modeling, parametric optimization, and cost analysis in electrical discharge machining of Al–SiC metal matrix composite. Silicon, 13(4), 1017–1040.
Behera, R. K., Samal, B. P., Panigrahi, S. C., & Das, S. R. (2021). Optimization of erosion wear of Al–Mg–Si–Cu–SiC composite produced by powder metallurgy method. Corrosion Reviews, 39(1), 63–75.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2021). Machining of hardstone quartz with modified AJM process using hot SiC abrasives: Analysis, modeling, optimization, and cost analysis. Surface Review and Letters, 28(02), 2050049.
Padhan, S., Das, A., Santoshwar, A., Dharmendrabhai, T. R., & Das, S. R. (2021). Sustainability assessment and machinability investigation of austenitic stainless steel in finish turning using SiAlON ceramic tool under different cutting conditions. Silicon, 13(1), 119–147.
Pradhan, S., Sahu, S., Das, S. R., & Dhupal, D. (2021). Experimental study and simulation of surface generation during machining of K-80 alumina ceramic using modified abrasive jet machining. International Journal of Abrasive Technology, 10(4), 298–329.
Das, A., Padhan, S., Das, S. R., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2021). Performance assessment and chip morphology evaluation of austenitic stainless steel under sustainable machining conditions. Metals, 11(12), 1931.
Dash, L., Padhan, S., Das, A., & Das, S. R. (2021). Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2021). Analysis on surface integrity and sustainability assessment in electrical discharge machining of engineered Al–22% SiC metal matrix composite. Revista de Metalurgia, 57(4), e210.
Pradhan, S., Das, S. R., & Dhupal, D. (2021). Performance evaluation of recently developed HAJM process during machining of hardstone quartz using hot silicon carbide abrasives. Silicon, 13(9), 2895–2919.
Parida, S. P., Jena, P. C., & Das, S. R. (2021). Comparative stress analysis of suitable biomaterials for artificial hip joint and femur bone using finite element simulation. Advances in Materials and Processing Technologies.
Elsheikh, A. H., Abd Elaziz, M., Das, S. R., Muthuramalingam, T., & Lu, S. (2021). A new optimized predictive model based on political optimizer for eco-friendly MQL turning of AISI 4340 alloy with nano-lubricants. Journal of Manufacturing Processes, 67, 562–578.
Naik, S., Das, S. R., & Dhupal, D. (2021). Experimental investigation, predictive modeling, parametric optimization, and cost analysis in electrical discharge machining of Al–SiC metal matrix composite. Silicon, 13(4), 1017–1040.
Behera, R. K., Samal, B. P., Panigrahi, S. C., & Das, S. R. (2021). Optimization of erosion wear of Al–Mg–Si–Cu–SiC composite produced by powder metallurgy method. Corrosion Reviews, 39(1), 63–75.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2021). Machining of hardstone quartz with modified AJM process using hot SiC abrasives: Analysis, modeling, optimization, and cost analysis. Surface Review and Letters, 28(02), 2050049.
Padhan, S., Das, A., Santoshwar, A., Dharmendrabhai, T. R., & Das, S. R. (2021). Sustainability assessment and machinability investigation of austenitic stainless steel in finish turning using SiAlON ceramic tool under different cutting conditions. Silicon, 13(1), 119–147.
Pradhan, S., Sahu, S., Das, S. R., & Dhupal, D. (2021). Experimental study and simulation of surface generation during machining of K-80 alumina ceramic using modified abrasive jet machining. International Journal of Abrasive Technology, 10(4), 298–329.
Das, A., Padhan, S., Das, S. R., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2021). Performance assessment and chip morphology evaluation of austenitic stainless steel under sustainable machining conditions. Metals, 11(12), 1931.
Dash, L., Padhan, S., Das, A., & Das, S. R. (2021). Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2021). Analysis on surface integrity and sustainability assessment in electrical discharge machining of engineered Al–22% SiC metal matrix composite. Revista de Metalurgia, 57(4), e210.
Pradhan, S., Das, S. R., & Dhupal, D. (2021). Performance evaluation of recently developed HAJM process during machining of hardstone quartz using hot silicon carbide abrasives. Silicon, 13(9), 2895–2919.
Parida, S. P., Jena, P. C., & Das, S. R. (2021). Comparative stress analysis of suitable biomaterials for artificial hip joint and femur bone using finite element simulation. Advances in Materials and Processing Technologies.
Elsheikh, A. H., Abd Elaziz, M., Das, S. R., Muthuramalingam, T., & Lu, S. (2021). A new optimized predictive model based on political optimizer for eco-friendly MQL turning of AISI 4340 alloy with nano-lubricants. Journal of Manufacturing Processes, 67, 562–578.
Naik, S., Das, S. R., & Dhupal, D. (2021). Experimental investigation, predictive modeling, parametric optimization, and cost analysis in electrical discharge machining of Al–SiC metal matrix composite. Silicon, 13(4), 1017–1040.
Behera, R. K., Samal, B. P., Panigrahi, S. C., & Das, S. R. (2021). Optimization of erosion wear of Al–Mg–Si–Cu–SiC composite produced by powder metallurgy method. Corrosion Reviews, 39(1), 63–75.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2021). Machining of hardstone quartz with modified AJM process using hot SiC abrasives: Analysis, modeling, optimization, and cost analysis. Surface Review and Letters, 28(02), 2050049.
Padhan, S., Das, A., Santoshwar, A., Dharmendrabhai, T. R., & Das, S. R. (2021). Sustainability assessment and machinability investigation of austenitic stainless steel in finish turning using SiAlON ceramic tool under different cutting conditions. Silicon, 13(1), 119–147.
Pradhan, S., Sahu, S., Das, S. R., & Dhupal, D. (2021). Experimental study and simulation of surface generation during machining of K-80 alumina ceramic using modified abrasive jet machining. International Journal of Abrasive Technology, 10(4), 298–329.
Das, A., Padhan, S., Das, S. R., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2021). Performance assessment and chip morphology evaluation of austenitic stainless steel under sustainable machining conditions. Metals, 11(12), 1931.
Dash, L., Padhan, S., Das, A., & Das, S. R. (2021). Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2021). Analysis on surface integrity and sustainability assessment in electrical discharge machining of engineered Al–22% SiC metal matrix composite. Revista de Metalurgia, 57(4), e210.
Pradhan, S., Das, S. R., & Dhupal, D. (2021). Performance evaluation of recently developed HAJM process during machining of hardstone quartz using hot silicon carbide abrasives. Silicon, 13(9), 2895–2919.
Parida, S. P., Jena, P. C., & Das, S. R. (2021). Comparative stress analysis of suitable biomaterials for artificial hip joint and femur bone using finite element simulation. Advances in Materials and Processing Technologies.
Elsheikh, A. H., Abd Elaziz, M., Das, S. R., Muthuramalingam, T., & Lu, S. (2021). A new optimized predictive model based on political optimizer for eco-friendly MQL turning of AISI 4340 alloy with nano-lubricants. Journal of Manufacturing Processes, 67, 562–578.
Naik, S., Das, S. R., & Dhupal, D. (2021). Experimental investigation, predictive modeling, parametric optimization, and cost analysis in electrical discharge machining of Al–SiC metal matrix composite. Silicon, 13(4), 1017–1040.
Behera, R. K., Samal, B. P., Panigrahi, S. C., & Das, S. R. (2021). Optimization of erosion wear of Al–Mg–Si–Cu–SiC composite produced by powder metallurgy method. Corrosion Reviews, 39(1), 63–75.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2021). Machining of hardstone quartz with modified AJM process using hot SiC abrasives: Analysis, modeling, optimization, and cost analysis. Surface Review and Letters, 28(02), 2050049.
Padhan, S., Das, A., Santoshwar, A., Dharmendrabhai, T. R., & Das, S. R. (2021). Sustainability assessment and machinability investigation of austenitic stainless steel in finish turning using SiAlON ceramic tool under different cutting conditions. Silicon, 13(1), 119–147.
Pradhan, S., Sahu, S., Das, S. R., & Dhupal, D. (2021). Experimental study and simulation of surface generation during machining of K-80 alumina ceramic using modified abrasive jet machining. International Journal of Abrasive Technology, 10(4), 298–329.
Das, A., Padhan, S., Das, S. R., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2021). Performance assessment and chip morphology evaluation of austenitic stainless steel under sustainable machining conditions. Metals, 11(12), 1931.
Dash, L., Padhan, S., Das, A., & Das, S. R. (2021). Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2021). Analysis on surface integrity and sustainability assessment in electrical discharge machining of engineered Al–22% SiC metal matrix composite. Revista de Metalurgia, 57(4), e210.
Pradhan, S., Das, S. R., & Dhupal, D. (2021). Performance evaluation of recently developed HAJM process during machining of hardstone quartz using hot silicon carbide abrasives. Silicon, 13(9), 2895–2919.
Parida, S. P., Jena, P. C., & Das, S. R. (2021). Comparative stress analysis of suitable biomaterials for artificial hip joint and femur bone using finite element simulation. Advances in Materials and Processing Technologies.
Elsheikh, A. H., Abd Elaziz, M., Das, S. R., Muthuramalingam, T., & Lu, S. (2021). A new optimized predictive model based on political optimizer for eco-friendly MQL turning of AISI 4340 alloy with nano-lubricants. Journal of Manufacturing Processes, 67, 562–578.
Naik, S., Das, S. R., & Dhupal, D. (2021). Experimental investigation, predictive modeling, parametric optimization, and cost analysis in electrical discharge machining of Al–SiC metal matrix composite. Silicon, 13(4), 1017–1040.
Behera, R. K., Samal, B. P., Panigrahi, S. C., & Das, S. R. (2021). Optimization of erosion wear of Al–Mg–Si–Cu–SiC composite produced by powder metallurgy method. Corrosion Reviews, 39(1), 63–75.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2021). Machining of hardstone quartz with modified AJM process using hot SiC abrasives: Analysis, modeling, optimization, and cost analysis. Surface Review and Letters, 28(02), 2050049.
Padhan, S., Das, A., Santoshwar, A., Dharmendrabhai, T. R., & Das, S. R. (2021). Sustainability assessment and machinability investigation of austenitic stainless steel in finish turning using SiAlON ceramic tool under different cutting conditions. Silicon, 13(1), 119–147.
Pradhan, S., Sahu, S., Das, S. R., & Dhupal, D. (2021). Experimental study and simulation of surface generation during machining of K-80 alumina ceramic using modified abrasive jet machining. International Journal of Abrasive Technology, 10(4), 298–329.
Das, A., Padhan, S., Das, S. R., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2021). Performance assessment and chip morphology evaluation of austenitic stainless steel under sustainable machining conditions. Metals, 11(12), 1931.
Dash, L., Padhan, S., Das, A., & Das, S. R. (2021). Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2021). Analysis on surface integrity and sustainability assessment in electrical discharge machining of engineered Al–22% SiC metal matrix composite. Revista de Metalurgia, 57(4), e210.
Pradhan, S., Das, S. R., & Dhupal, D. (2021). Performance evaluation of recently developed HAJM process during machining of hardstone quartz using hot silicon carbide abrasives. Silicon, 13(9), 2895–2919.
Parida, S. P., Jena, P. C., & Das, S. R. (2021). Comparative stress analysis of suitable biomaterials for artificial hip joint and femur bone using finite element simulation. Advances in Materials and Processing Technologies.
Elsheikh, A. H., Abd Elaziz, M., Das, S. R., Muthuramalingam, T., & Lu, S. (2021). A new optimized predictive model based on political optimizer for eco-friendly MQL turning of AISI 4340 alloy with nano-lubricants. Journal of Manufacturing Processes, 67, 562–578.
Naik, S., Das, S. R., & Dhupal, D. (2021). Experimental investigation, predictive modeling, parametric optimization, and cost analysis in electrical discharge machining of Al–SiC metal matrix composite. Silicon, 13(4), 1017–1040.
Behera, R. K., Samal, B. P., Panigrahi, S. C., & Das, S. R. (2021). Optimization of erosion wear of Al–Mg–Si–Cu–SiC composite produced by powder metallurgy method. Corrosion Reviews, 39(1), 63–75.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2021). Machining of hardstone quartz with modified AJM process using hot SiC abrasives: Analysis, modeling, optimization, and cost analysis. Surface Review and Letters, 28(02), 2050049.
Padhan, S., Das, A., Santoshwar, A., Dharmendrabhai, T. R., & Das, S. R. (2021). Sustainability assessment and machinability investigation of austenitic stainless steel in finish turning using SiAlON ceramic tool under different cutting conditions. Silicon, 13(1), 119–147.
Pradhan, S., Sahu, S., Das, S. R., & Dhupal, D. (2021). Experimental study and simulation of surface generation during machining of K-80 alumina ceramic using modified abrasive jet machining. International Journal of Abrasive Technology, 10(4), 298–329.
Das, A., Padhan, S., Das, S. R., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2021). Performance assessment and chip morphology evaluation of austenitic stainless steel under sustainable machining conditions. Metals, 11(12), 1931.
Dash, L., Padhan, S., Das, A., & Das, S. R. (2021). Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2021). Analysis on surface integrity and sustainability assessment in electrical discharge machining of engineered Al–22% SiC metal matrix composite. Revista de Metalurgia, 57(4), e210.
Pradhan, S., Das, S. R., & Dhupal, D. (2021). Performance evaluation of recently developed HAJM process during machining of hardstone quartz using hot silicon carbide abrasives. Silicon, 13(9), 2895–2919.
Parida, S. P., Jena, P. C., & Das, S. R. (2021). Comparative stress analysis of suitable biomaterials for artificial hip joint and femur bone using finite element simulation. Advances in Materials and Processing Technologies.
Elsheikh, A. H., Abd Elaziz, M., Das, S. R., Muthuramalingam, T., & Lu, S. (2021). A new optimized predictive model based on political optimizer for eco-friendly MQL turning of AISI 4340 alloy with nano-lubricants. Journal of Manufacturing Processes, 67, 562–578.
Naik, S., Das, S. R., & Dhupal, D. (2021). Experimental investigation, predictive modeling, parametric optimization, and cost analysis in electrical discharge machining of Al–SiC metal matrix composite. Silicon, 13(4), 1017–1040.
Behera, R. K., Samal, B. P., Panigrahi, S. C., & Das, S. R. (2021). Optimization of erosion wear of Al–Mg–Si–Cu–SiC composite produced by powder metallurgy method. Corrosion Reviews, 39(1), 63–75.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2021). Machining of hardstone quartz with modified AJM process using hot SiC abrasives: Analysis, modeling, optimization, and cost analysis. Surface Review and Letters, 28(02), 2050049.
Padhan, S., Das, A., Santoshwar, A., Dharmendrabhai, T. R., & Das, S. R. (2021). Sustainability assessment and machinability investigation of austenitic stainless steel in finish turning using SiAlON ceramic tool under different cutting conditions. Silicon, 13(1), 119–147.
Pradhan, S., Sahu, S., Das, S. R., & Dhupal, D. (2021). Experimental study and simulation of surface generation during machining of K-80 alumina ceramic using modified abrasive jet machining. International Journal of Abrasive Technology, 10(4), 298–329.
56. Das, A., Padhan, S., Das, S. R., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2021). Performance assessment and chip morphology evaluation of austenitic stainless steel under sustainable machining conditions. Metals, 11(12), 1931.
57. Dash, L., Padhan, S., Das, A., & Das, S. R. (2021). Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
58. Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2021). Analysis on surface integrity and sustainability assessment in electrical discharge machining of engineered Al–22% SiC metal matrix composite. Revista de Metalurgia, 57(4), e210.
59. Pradhan, S., Das, S. R., & Dhupal, D. (2021). Performance evaluation of recently developed HAJM process during machining of hardstone quartz using hot silicon carbide abrasives. Silicon, 13(9), 2895–2919.
60. Parida, S. P., Jena, P. C., & Das, S. R. (2021). Comparative stress analysis of suitable biomaterials for artificial hip joint and femur bone using finite element simulation. Advances in Materials and Processing Technologies.
61. Elsheikh, A. H., Abd Elaziz, M., Das, S. R., Muthuramalingam, T., & Lu, S. (2021). A new optimized predictive model based on political optimizer for eco-friendly MQL turning of AISI 4340 alloy with nano-lubricants. Journal of Manufacturing Processes, 67, 562–578.
62. Naik, S., Das, S. R., & Dhupal, D. (2021). Experimental investigation, predictive modeling, parametric optimization, and cost analysis in electrical discharge machining of Al–SiC metal matrix composite. Silicon, 13(4), 1017–1040.
63. Behera, R. K., Samal, B. P., Panigrahi, S. C., & Das, S. R. (2021). Optimization of erosion wear of Al–Mg–Si–Cu–SiC composite produced by powder metallurgy method. Corrosion Reviews, 39(1), 63–75.
64. Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2021). Machining of hardstone quartz with modified AJM process using hot SiC abrasives: Analysis, modeling, optimization, and cost analysis. Surface Review and Letters, 28(02), 2050049.
65. Padhan, S., Das, A., Santoshwar, A., Dharmendrabhai, T. R., & Das, S. R. (2021). Sustainability assessment and machinability investigation of austenitic stainless steel in finish turning using SiAlON ceramic tool under different cutting conditions. Silicon, 13(1), 119–147.
66. Pradhan, S., Sahu, S., Das, S. R., & Dhupal, D. (2021). Experimental study and simulation of surface generation during machining of K-80 alumina ceramic using modified abrasive jet machining. International Journal of Abrasive Technology, 10(4), 298–329.
56. Das, A., Padhan, S., Das, S. R., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2021). Performance assessment and chip morphology evaluation of austenitic stainless steel under sustainable machining conditions. Metals, 11(12), 1931.
57. Dash, L., Padhan, S., Das, A., & Das, S. R. (2021). Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
58. Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2021). Analysis on surface integrity and sustainability assessment in electrical discharge machining of engineered Al–22% SiC metal matrix composite. Revista de Metalurgia, 57(4), e210.
59. Pradhan, S., Das, S. R., & Dhupal, D. (2021). Performance evaluation of recently developed HAJM process during machining of hardstone quartz using hot silicon carbide abrasives. Silicon, 13(9), 2895–2919.
60. Parida, S. P., Jena, P. C., & Das, S. R. (2021). Comparative stress analysis of suitable biomaterials for artificial hip joint and femur bone using finite element simulation. Advances in Materials and Processing Technologies.
61. Elsheikh, A. H., Abd Elaziz, M., Das, S. R., Muthuramalingam, T., & Lu, S. (2021). A new optimized predictive model based on political optimizer for eco-friendly MQL turning of AISI 4340 alloy with nano-lubricants. Journal of Manufacturing Processes, 67, 562–578.
62. Naik, S., Das, S. R., & Dhupal, D. (2021). Experimental investigation, predictive modeling, parametric optimization, and cost analysis in electrical discharge machining of Al–SiC metal matrix composite. Silicon, 13(4), 1017–1040.
63. Behera, R. K., Samal, B. P., Panigrahi, S. C., & Das, S. R. (2021). Optimization of erosion wear of Al–Mg–Si–Cu–SiC composite produced by powder metallurgy method. Corrosion Reviews, 39(1), 63–75.
64. Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2021). Machining of hardstone quartz with modified AJM process using hot SiC abrasives: Analysis, modeling, optimization, and cost analysis. Surface Review and Letters, 28(02), 2050049.
65. Padhan, S., Das, A., Santoshwar, A., Dharmendrabhai, T. R., & Das, S. R. (2021). Sustainability assessment and machinability investigation of austenitic stainless steel in finish turning using SiAlON ceramic tool under different cutting conditions. Silicon, 13(1), 119–147.
66. Pradhan, S., Sahu, S., Das, S. R., & Dhupal, D. (2021). Experimental study and simulation of surface generation during machining of K-80 alumina ceramic using modified abrasive jet machining. International Journal of Abrasive Technology, 10(4), 298–329.
K. Prusty, S. Patra and S. K. Swain* “Nano ZnO imprinted dextran hybrid poly (N-isopropylacrylamide)/poly ethylene glycol composite hydrogels for in vitro release of ciprofloxacin” Materials Today Communication, 26, 101869-670, (Elsevier), (2021). (Impact Factor: 4.5)ISSN: 0925-8388. DOI: https://doi.org/10.1016/j.mtcomm.2020.101869
D. Bharatia, B. Parhiand S K Swain* “Preparation, characterization and dielectric properties of GO based ZnO embedded mixed metal oxides ternary nanostructured composites” Journal of Alloys and Compounds, 869, 159274-82, (Elsevier), (2021). (Impact Factor: 6.3) ISSN:03602559. DOI: https://doi.org/10.1016/j.jallcom.2021.159274
P. K. Sethi, P. Mohapatra, S. Patra, D. Bharatia and S. K. Swain*”Antimicrobial and barrier properties of polyacrylic acid/GO hybrid nanocomposites for packaging application” Nano-Structures & Nano-Objects, 26, 100747, (Elsevier), (2021). (Impact Factor:5.06) ISSN: 2352-507X. DOI: https://doi.org//10.1016/j.nanoso.2021.100747
A. Biwal, P. Sethy and S. K. Swain* “Change in orientation of polyacrylic acid and chitosan networks by imprintment of gold nanoparticles” Polymer-Plastic Technology and Materials, 60(2), 182-194, (Tylor & Francis), (2021). (Impact Factor: 3.32) ISSN: 03602559. DOI: https://doi.org/10.1016/10.1080/25740881.2020.1793196
K. Prusty and S. K. Swain* “Polypropylene oxide/polyethylene oxide-cellulose hybrid nanocomposite hydrogels as drug delivery vehicle” Journal of Applied Polymer Science, 138(9), 49921-30, (Wiley), (2021). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.20200978
K. Prusty, S. Patra and S. K. Swain* “Nano ZnO imprinted dextran hybrid poly (N-isopropylacrylamide)/poly ethylene glycol composite hydrogels for in vitro release of ciprofloxacin” Materials Today Communication, 26, 101869-670, (Elsevier), (2021). (Impact Factor: 4.5)ISSN: 0925-8388. DOI: https://doi.org/10.1016/j.mtcomm.2020.101869
D. Bharatia, B. Parhiand S K Swain* “Preparation, characterization and dielectric properties of GO based ZnO embedded mixed metal oxides ternary nanostructured composites” Journal of Alloys and Compounds, 869, 159274-82, (Elsevier), (2021). (Impact Factor: 6.3) ISSN:03602559. DOI: https://doi.org/10.1016/j.jallcom.2021.159274
P. K. Sethi, P. Mohapatra, S. Patra, D. Bharatia and S. K. Swain*”Antimicrobial and barrier properties of polyacrylic acid/GO hybrid nanocomposites for packaging application” Nano-Structures & Nano-Objects, 26, 100747, (Elsevier), (2021). (Impact Factor:5.06) ISSN: 2352-507X. DOI: https://doi.org//10.1016/j.nanoso.2021.100747
A. Biwal, P. Sethy and S. K. Swain* “Change in orientation of polyacrylic acid and chitosan networks by imprintment of gold nanoparticles” Polymer-Plastic Technology and Materials, 60(2), 182-194, (Tylor & Francis), (2021). (Impact Factor: 3.32) ISSN: 03602559. DOI: https://doi.org/10.1016/10.1080/25740881.2020.1793196
K. Prusty and S. K. Swain* “Polypropylene oxide/polyethylene oxide-cellulose hybrid nanocomposite hydrogels as drug delivery vehicle” Journal of Applied Polymer Science, 138(9), 49921-30, (Wiley), (2021). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.20200978
K. Prusty, S. Patra and S. K. Swain* “Nano ZnO imprinted dextran hybrid poly (N-isopropylacrylamide)/poly ethylene glycol composite hydrogels for in vitro release of ciprofloxacin” Materials Today Communication, 26, 101869-670, (Elsevier), (2021). (Impact Factor: 4.5)ISSN: 0925-8388. DOI: https://doi.org/10.1016/j.mtcomm.2020.101869
D. Bharatia, B. Parhiand S K Swain* “Preparation, characterization and dielectric properties of GO based ZnO embedded mixed metal oxides ternary nanostructured composites” Journal of Alloys and Compounds, 869, 159274-82, (Elsevier), (2021). (Impact Factor: 6.3) ISSN:03602559. DOI: https://doi.org/10.1016/j.jallcom.2021.159274
P. K. Sethi, P. Mohapatra, S. Patra, D. Bharatia and S. K. Swain*”Antimicrobial and barrier properties of polyacrylic acid/GO hybrid nanocomposites for packaging application” Nano-Structures & Nano-Objects, 26, 100747, (Elsevier), (2021). (Impact Factor:5.06) ISSN: 2352-507X. DOI: https://doi.org//10.1016/j.nanoso.2021.100747
A. Biwal, P. Sethy and S. K. Swain* “Change in orientation of polyacrylic acid and chitosan networks by imprintment of gold nanoparticles” Polymer-Plastic Technology and Materials, 60(2), 182-194, (Tylor & Francis), (2021). (Impact Factor: 3.32) ISSN: 03602559. DOI: https://doi.org/10.1016/10.1080/25740881.2020.1793196
K. Prusty and S. K. Swain* “Polypropylene oxide/polyethylene oxide-cellulose hybrid nanocomposite hydrogels as drug delivery vehicle” Journal of Applied Polymer Science, 138(9), 49921-30, (Wiley), (2021). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.20200978
K. Prusty, S. Patra and S. K. Swain* “Nano ZnO imprinted dextran hybrid poly (N-isopropylacrylamide)/poly ethylene glycol composite hydrogels for in vitro release of ciprofloxacin” Materials Today Communication, 26, 101869-670, (Elsevier), (2021). (Impact Factor: 4.5)ISSN: 0925-8388. DOI: https://doi.org/10.1016/j.mtcomm.2020.101869
D. Bharatia, B. Parhiand S K Swain* “Preparation, characterization and dielectric properties of GO based ZnO embedded mixed metal oxides ternary nanostructured composites” Journal of Alloys and Compounds, 869, 159274-82, (Elsevier), (2021). (Impact Factor: 6.3) ISSN:03602559. DOI: https://doi.org/10.1016/j.jallcom.2021.159274
P. K. Sethi, P. Mohapatra, S. Patra, D. Bharatia and S. K. Swain*”Antimicrobial and barrier properties of polyacrylic acid/GO hybrid nanocomposites for packaging application” Nano-Structures & Nano-Objects, 26, 100747, (Elsevier), (2021). (Impact Factor:5.06) ISSN: 2352-507X. DOI: https://doi.org//10.1016/j.nanoso.2021.100747
A. Biwal, P. Sethy and S. K. Swain* “Change in orientation of polyacrylic acid and chitosan networks by imprintment of gold nanoparticles” Polymer-Plastic Technology and Materials, 60(2), 182-194, (Tylor & Francis), (2021). (Impact Factor: 3.32) ISSN: 03602559. DOI: https://doi.org/10.1016/10.1080/25740881.2020.1793196
K. Prusty and S. K. Swain* “Polypropylene oxide/polyethylene oxide-cellulose hybrid nanocomposite hydrogels as drug delivery vehicle” Journal of Applied Polymer Science, 138(9), 49921-30, (Wiley), (2021). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.20200978
K. Prusty, S. Patra and S. K. Swain* “Nano ZnO imprinted dextran hybrid poly (N-isopropylacrylamide)/poly ethylene glycol composite hydrogels for in vitro release of ciprofloxacin” Materials Today Communication, 26, 101869-670, (Elsevier), (2021). (Impact Factor: 4.5)ISSN: 0925-8388. DOI: https://doi.org/10.1016/j.mtcomm.2020.101869
D. Bharatia, B. Parhiand S K Swain* “Preparation, characterization and dielectric properties of GO based ZnO embedded mixed metal oxides ternary nanostructured composites” Journal of Alloys and Compounds, 869, 159274-82, (Elsevier), (2021). (Impact Factor: 6.3) ISSN:03602559. DOI: https://doi.org/10.1016/j.jallcom.2021.159274
P. K. Sethi, P. Mohapatra, S. Patra, D. Bharatia and S. K. Swain*”Antimicrobial and barrier properties of polyacrylic acid/GO hybrid nanocomposites for packaging application” Nano-Structures & Nano-Objects, 26, 100747, (Elsevier), (2021). (Impact Factor:5.06) ISSN: 2352-507X. DOI: https://doi.org//10.1016/j.nanoso.2021.100747
A. Biwal, P. Sethy and S. K. Swain* “Change in orientation of polyacrylic acid and chitosan networks by imprintment of gold nanoparticles” Polymer-Plastic Technology and Materials, 60(2), 182-194, (Tylor & Francis), (2021). (Impact Factor: 3.32) ISSN: 03602559. DOI: https://doi.org/10.1016/10.1080/25740881.2020.1793196
K. Prusty and S. K. Swain* “Polypropylene oxide/polyethylene oxide-cellulose hybrid nanocomposite hydrogels as drug delivery vehicle” Journal of Applied Polymer Science, 138(9), 49921-30, (Wiley), (2021). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.20200978
K. Prusty, S. Patra and S. K. Swain* “Nano ZnO imprinted dextran hybrid poly (N-isopropylacrylamide)/poly ethylene glycol composite hydrogels for in vitro release of ciprofloxacin” Materials Today Communication, 26, 101869-670, (Elsevier), (2021). (Impact Factor: 4.5)ISSN: 0925-8388. DOI: https://doi.org/10.1016/j.mtcomm.2020.101869
D. Bharatia, B. Parhiand S K Swain* “Preparation, characterization and dielectric properties of GO based ZnO embedded mixed metal oxides ternary nanostructured composites” Journal of Alloys and Compounds, 869, 159274-82, (Elsevier), (2021). (Impact Factor: 6.3) ISSN:03602559. DOI: https://doi.org/10.1016/j.jallcom.2021.159274
P. K. Sethi, P. Mohapatra, S. Patra, D. Bharatia and S. K. Swain*”Antimicrobial and barrier properties of polyacrylic acid/GO hybrid nanocomposites for packaging application” Nano-Structures & Nano-Objects, 26, 100747, (Elsevier), (2021). (Impact Factor:5.06) ISSN: 2352-507X. DOI: https://doi.org//10.1016/j.nanoso.2021.100747
A. Biwal, P. Sethy and S. K. Swain* “Change in orientation of polyacrylic acid and chitosan networks by imprintment of gold nanoparticles” Polymer-Plastic Technology and Materials, 60(2), 182-194, (Tylor & Francis), (2021). (Impact Factor: 3.32) ISSN: 03602559. DOI: https://doi.org/10.1016/10.1080/25740881.2020.1793196
K. Prusty and S. K. Swain* “Polypropylene oxide/polyethylene oxide-cellulose hybrid nanocomposite hydrogels as drug delivery vehicle” Journal of Applied Polymer Science, 138(9), 49921-30, (Wiley), (2021). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.20200978
K. Prusty, S. Patra and S. K. Swain* “Nano ZnO imprinted dextran hybrid poly (N-isopropylacrylamide)/poly ethylene glycol composite hydrogels for in vitro release of ciprofloxacin” Materials Today Communication, 26, 101869-670, (Elsevier), (2021). (Impact Factor: 4.5)ISSN: 0925-8388. DOI: https://doi.org/10.1016/j.mtcomm.2020.101869
D. Bharatia, B. Parhiand S K Swain* “Preparation, characterization and dielectric properties of GO based ZnO embedded mixed metal oxides ternary nanostructured composites” Journal of Alloys and Compounds, 869, 159274-82, (Elsevier), (2021). (Impact Factor: 6.3) ISSN:03602559. DOI: https://doi.org/10.1016/j.jallcom.2021.159274
P. K. Sethi, P. Mohapatra, S. Patra, D. Bharatia and S. K. Swain*”Antimicrobial and barrier properties of polyacrylic acid/GO hybrid nanocomposites for packaging application” Nano-Structures & Nano-Objects, 26, 100747, (Elsevier), (2021). (Impact Factor:5.06) ISSN: 2352-507X. DOI: https://doi.org//10.1016/j.nanoso.2021.100747
A. Biwal, P. Sethy and S. K. Swain* “Change in orientation of polyacrylic acid and chitosan networks by imprintment of gold nanoparticles” Polymer-Plastic Technology and Materials, 60(2), 182-194, (Tylor & Francis), (2021). (Impact Factor: 3.32) ISSN: 03602559. DOI: https://doi.org/10.1016/10.1080/25740881.2020.1793196
K. Prusty and S. K. Swain* “Polypropylene oxide/polyethylene oxide-cellulose hybrid nanocomposite hydrogels as drug delivery vehicle” Journal of Applied Polymer Science, 138(9), 49921-30, (Wiley), (2021). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.20200978
K. Prusty, S. Patra and S. K. Swain* “Nano ZnO imprinted dextran hybrid poly (N-isopropylacrylamide)/poly ethylene glycol composite hydrogels for in vitro release of ciprofloxacin” Materials Today Communication, 26, 101869-670, (Elsevier), (2021). (Impact Factor: 4.5)ISSN: 0925-8388. DOI: https://doi.org/10.1016/j.mtcomm.2020.101869
D. Bharatia, B. Parhiand S K Swain* “Preparation, characterization and dielectric properties of GO based ZnO embedded mixed metal oxides ternary nanostructured composites” Journal of Alloys and Compounds, 869, 159274-82, (Elsevier), (2021). (Impact Factor: 6.3) ISSN:03602559. DOI: https://doi.org/10.1016/j.jallcom.2021.159274
P. K. Sethi, P. Mohapatra, S. Patra, D. Bharatia and S. K. Swain*”Antimicrobial and barrier properties of polyacrylic acid/GO hybrid nanocomposites for packaging application” Nano-Structures & Nano-Objects, 26, 100747, (Elsevier), (2021). (Impact Factor:5.06) ISSN: 2352-507X. DOI: https://doi.org//10.1016/j.nanoso.2021.100747
A. Biwal, P. Sethy and S. K. Swain* “Change in orientation of polyacrylic acid and chitosan networks by imprintment of gold nanoparticles” Polymer-Plastic Technology and Materials, 60(2), 182-194, (Tylor & Francis), (2021). (Impact Factor: 3.32) ISSN: 03602559. DOI: https://doi.org/10.1016/10.1080/25740881.2020.1793196
K. Prusty and S. K. Swain* “Polypropylene oxide/polyethylene oxide-cellulose hybrid nanocomposite hydrogels as drug delivery vehicle” Journal of Applied Polymer Science, 138(9), 49921-30, (Wiley), (2021). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.20200978
Padhi, P. K., Bidya Singh. â€œDiasporic love and identity: the case of displaced during the Partitionâ€ in Turkish Online Journal of Qualitative Inquiry (TOJQI), Volume 6, July 2021, (SCOPUS indexed),e-ISSN 1309-6591 , Page No. 6072- 6077.
Padhi, P. K., M Aishvarya. â€œNeopagan and Reconstructionist Spirituality and Religion in Australiaâ€ in Kala: Journal of Indian Art History Congress, Volume 25, No-10, 2020- 2021, (UGC Care indexed) ISSN- 0975-7945, Page No. 26-32.
Padhi, P. K., Bidya Singh. â€œDiasporic love and identity: the case of displaced during the Partitionâ€ in Turkish Online Journal of Qualitative Inquiry (TOJQI), Volume 6, July 2021, (SCOPUS indexed),e-ISSN 1309-6591 , Page No. 6072- 6077.
Padhi, P. K., M Aishvarya. â€œNeopagan and Reconstructionist Spirituality and Religion in Australiaâ€ in Kala: Journal of Indian Art History Congress, Volume 25, No-10, 2020- 2021, (UGC Care indexed) ISSN- 0975-7945, Page No. 26-32.
Padhi, P. K., Bidya Singh. â€œDiasporic love and identity: the case of displaced during the Partitionâ€ in Turkish Online Journal of Qualitative Inquiry (TOJQI), Volume 6, July 2021, (SCOPUS indexed),e-ISSN 1309-6591 , Page No. 6072- 6077.
Padhi, P. K., M Aishvarya. â€œNeopagan and Reconstructionist Spirituality and Religion in Australiaâ€ in Kala: Journal of Indian Art History Congress, Volume 25, No-10, 2020- 2021, (UGC Care indexed) ISSN- 0975-7945, Page No. 26-32.
Padhi, P. K., Bidya Singh. â€œDiasporic love and identity: the case of displaced during the Partitionâ€ in Turkish Online Journal of Qualitative Inquiry (TOJQI), Volume 6, July 2021, (SCOPUS indexed),e-ISSN 1309-6591 , Page No. 6072- 6077.
Padhi, P. K., M Aishvarya. â€œNeopagan and Reconstructionist Spirituality and Religion in Australiaâ€ in Kala: Journal of Indian Art History Congress, Volume 25, No-10, 2020- 2021, (UGC Care indexed) ISSN- 0975-7945, Page No. 26-32.
A K Patra, A N, B Rout, D K Subudhi & Saswata Pani, Artificial Pancreas (AP) Based on the Fractional-Order PID Controller (FOPIDC) with JAYA Optimization Technique, pp 19Springer Nature, Innovation in Electrical Power Engineering, Communication, and Computing Technology, pp 19–30, 16 December 2021
D Rath, A Kumar Patra, B Rout, D K Subudhi & S K Kar, Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller, pp 295–308, Innovation in Electrical Power Engineering, Communication, and Computing Technology,16 December 2021
A K Patra, A N, B Rout, D K Subudhi & Saswata Pani, Artificial Pancreas (AP) Based on the Fractional-Order PID Controller (FOPIDC) with JAYA Optimization Technique, pp 19Springer Nature, Innovation in Electrical Power Engineering, Communication, and Computing Technology, pp 19–30, 16 December 2021
D Rath, A Kumar Patra, B Rout, D K Subudhi & S K Kar, Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller, pp 295–308, Innovation in Electrical Power Engineering, Communication, and Computing Technology,16 December 2021
A K Patra, A N, B Rout, D K Subudhi & Saswata Pani, Artificial Pancreas (AP) Based on the Fractional-Order PID Controller (FOPIDC) with JAYA Optimization Technique, pp 19Springer Nature, Innovation in Electrical Power Engineering, Communication, and Computing Technology, pp 19–30, 16 December 2021
D Rath, A Kumar Patra, B Rout, D K Subudhi & S K Kar, Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller, pp 295–308, Innovation in Electrical Power Engineering, Communication, and Computing Technology,16 December 2021
A K Patra, A N, B Rout, D K Subudhi & Saswata Pani, Artificial Pancreas (AP) Based on the Fractional-Order PID Controller (FOPIDC) with JAYA Optimization Technique, pp 19Springer Nature, Innovation in Electrical Power Engineering, Communication, and Computing Technology, pp 19–30, 16 December 2021
D Rath, A Kumar Patra, B Rout, D K Subudhi & S K Kar, Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller, pp 295–308, Innovation in Electrical Power Engineering, Communication, and Computing Technology,16 December 2021
A K Patra, A N, B Rout, D K Subudhi & Saswata Pani, Artificial Pancreas (AP) Based on the Fractional-Order PID Controller (FOPIDC) with JAYA Optimization Technique, pp 19Springer Nature, Innovation in Electrical Power Engineering, Communication, and Computing Technology, pp 19–30, 16 December 2021
D Rath, A Kumar Patra, B Rout, D K Subudhi & S K Kar, Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller, pp 295–308, Innovation in Electrical Power Engineering, Communication, and Computing Technology,16 December 2021
A K Patra, A N, B Rout, D K Subudhi & Saswata Pani, Artificial Pancreas (AP) Based on the Fractional-Order PID Controller (FOPIDC) with JAYA Optimization Technique, pp 19Springer Nature, Innovation in Electrical Power Engineering, Communication, and Computing Technology, pp 19–30, 16 December 2021
D Rath, A Kumar Patra, B Rout, D K Subudhi & S K Kar, Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller, pp 295–308, Innovation in Electrical Power Engineering, Communication, and Computing Technology,16 December 2021
"Smart Cloud Service Management Algorithm for Vehicular Clouds", Sohan Kumar Pande, Sanjaya Kumar Panda, Satyabrata Das. etal., IEEE Transactions on Intelligent Transportation Systems, DOI: 10.1109/TITS.2020.3021075,Â https://ieeexplore.ieee.org/document/9210815
"A resource Management Algorithm for Vertual Machine Migration in Vehicular Cloud Computing", Sohan Kumar Pande, Sanjaya Kumar Panda, Satyabrata Das. etal., CMC-Computers, Materials & Continua,(SCI)2021, 67(2), pp. 2647-2663, doi:10.32604/cmc.2021.015026
"A Novel Communication Framework Between MANET and WSN in IoT Based Smart Environment", Bata Krishna Tripathy, Swagat Ku. Jena, Vineeth Reddy, Satyabrata Das &Sanjaya Ku. Panda, International Journal of Information Technology(Springer)(Scopus),2021, 13(3), pp. 921-931 https://link.springer.com/article/10.1007/s41870-020-00520-x
"Harris Hawks Jaya Algorithm-Based Routing Protocol in Delay Tolerant Network", Pradosh Kumar Gantayat & Satyabrata Das, International Journal of Business Data Communications and Networking(IJBDCN), igi-global 2021,(ESCI) (Scopus), Volume 17, Issue 1, Article 3, https://www.igi-global.com/article/harris-hawks-jaya-algorithm-based-routing-protocol-in-delay-tolerant-network/271378
"Energy Efficient Routes protocols to Minimize Holes in Wireless Sensor Networks Using Probability Enhancement Algorithm", Chinmay Ku. Nayak & Satyabrata Das, International Journal of e-Collaboration (ESCI)(Scopus), Volume 17, Issue 4, Article2, DOI:10.4018/IJeC.2021100102
"Dynamic service migration and resource management for vehicular clouds", Sohan Ku. Pandey, Sanjaya Ku. Panda & Satyabrata Das, Journal of Ambient Intelligence and Humanized Computing, (SCI), DOI:10.1007/s12652-020-02166-w
Sahoo, D. R., & Biswal, T. (2021). Alginate and its application to tissue engineering. SN Applied Sciences, 3(1), 30-48. (Scopus, ESCI).
Biswal, T., & Priyadarsini, M. (2021). Green synthesis, swelling behaviour and orthopaedic application of polysaccharide-based hydrogel. Indian Journal of Chemical Technology (IJCT), 27(6), 515-520. (Scopus, SCIE, IF: 0. 57).
Priyadarsini, M., Biswal, T*., & Dash, S. (2021). Biodegradable superabsorbent with potential biomedical application as drug delivery system of “pectin-gP (AN-co-AM)/chicken eggshell” bio-composite. Polymer Bulletin, 78(11), 6337-6349 (Scopus, SCI, IF: 2.843).
A K Patra, A N, B Rout, D K Subudhi & Saswata Pani, Artificial Pancreas (AP) Based on the Fractional-Order PID Controller (FOPIDC) with JAYA Optimization Technique, pp 19Springer Nature, Innovation in Electrical Power Engineering, Communication, and Computing Technology, pp 19–30, 16 December 2021
D Rath, A Kumar Patra, B Rout, D K Subudhi & S K Kar, Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller, pp 295–308, Innovation in Electrical Power Engineering, Communication, and Computing Technology,16 December 2021
A K Patra, A N, B Rout, D K Subudhi & Saswata Pani, Artificial Pancreas (AP) Based on the Fractional-Order PID Controller (FOPIDC) with JAYA Optimization Technique, pp 19Springer Nature, Innovation in Electrical Power Engineering, Communication, and Computing Technology, pp 19–30, 16 December 2021
D Rath, A Kumar Patra, B Rout, D K Subudhi & S K Kar, Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller, pp 295–308, Innovation in Electrical Power Engineering, Communication, and Computing Technology,16 December 2021
A K Patra, A N, B Rout, D K Subudhi & Saswata Pani, Artificial Pancreas (AP) Based on the Fractional-Order PID Controller (FOPIDC) with JAYA Optimization Technique, pp 19Springer Nature, Innovation in Electrical Power Engineering, Communication, and Computing Technology, pp 19–30, 16 December 2021
D Rath, A Kumar Patra, B Rout, D K Subudhi & S K Kar, Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller, pp 295–308, Innovation in Electrical Power Engineering, Communication, and Computing Technology,16 December 2021
A K Patra, A N, B Rout, D K Subudhi & Saswata Pani, Artificial Pancreas (AP) Based on the Fractional-Order PID Controller (FOPIDC) with JAYA Optimization Technique, pp 19Springer Nature, Innovation in Electrical Power Engineering, Communication, and Computing Technology, pp 19–30, 16 December 2021
D Rath, A Kumar Patra, B Rout, D K Subudhi & S K Kar, Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller, pp 295–308, Innovation in Electrical Power Engineering, Communication, and Computing Technology,16 December 2021
A K Patra, A N, B Rout, D K Subudhi & Saswata Pani, Artificial Pancreas (AP) Based on the Fractional-Order PID Controller (FOPIDC) with JAYA Optimization Technique, pp 19Springer Nature, Innovation in Electrical Power Engineering, Communication, and Computing Technology, pp 19–30, 16 December 2021
D Rath, A Kumar Patra, B Rout, D K Subudhi & S K Kar, Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller, pp 295–308, Innovation in Electrical Power Engineering, Communication, and Computing Technology,16 December 2021
A K Patra, A N, B Rout, D K Subudhi & Saswata Pani, Artificial Pancreas (AP) Based on the Fractional-Order PID Controller (FOPIDC) with JAYA Optimization Technique, pp 19Springer Nature, Innovation in Electrical Power Engineering, Communication, and Computing Technology, pp 19–30, 16 December 2021
D Rath, A Kumar Patra, B Rout, D K Subudhi & S K Kar, Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller, pp 295–308, Innovation in Electrical Power Engineering, Communication, and Computing Technology,16 December 2021
A K Patra, A N, B Rout, D K Subudhi & Saswata Pani, Artificial Pancreas (AP) Based on the Fractional-Order PID Controller (FOPIDC) with JAYA Optimization Technique, pp 19Springer Nature, Innovation in Electrical Power Engineering, Communication, and Computing Technology, pp 19–30, 16 December 2021
D Rath, A Kumar Patra, B Rout, D K Subudhi & S K Kar, Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller, pp 295–308, Innovation in Electrical Power Engineering, Communication, and Computing Technology,16 December 2021
A K Patra, A N, B Rout, D K Subudhi & Saswata Pani, Artificial Pancreas (AP) Based on the Fractional-Order PID Controller (FOPIDC) with JAYA Optimization Technique, pp 19Springer Nature, Innovation in Electrical Power Engineering, Communication, and Computing Technology, pp 19–30, 16 December 2021
D Rath, A Kumar Patra, B Rout, D K Subudhi & S K Kar, Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller, pp 295–308, Innovation in Electrical Power Engineering, Communication, and Computing Technology,16 December 2021
A K Patra, A N, B Rout, D K Subudhi & Saswata Pani, Artificial Pancreas (AP) Based on the Fractional-Order PID Controller (FOPIDC) with JAYA Optimization Technique, pp 19Springer Nature, Innovation in Electrical Power Engineering, Communication, and Computing Technology, pp 19–30, 16 December 2021
D Rath, A Kumar Patra, B Rout, D K Subudhi & S K Kar, Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller, pp 295–308, Innovation in Electrical Power Engineering, Communication, and Computing Technology,16 December 2021
A K Patra, A N, B Rout, D K Subudhi & Saswata Pani, Artificial Pancreas (AP) Based on the Fractional-Order PID Controller (FOPIDC) with JAYA Optimization Technique, pp 19Springer Nature, Innovation in Electrical Power Engineering, Communication, and Computing Technology, pp 19–30, 16 December 2021
D Rath, A Kumar Patra, B Rout, D K Subudhi & S K Kar, Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller, pp 295–308, Innovation in Electrical Power Engineering, Communication, and Computing Technology,16 December 2021
A K Patra, A N, B Rout, D K Subudhi & Saswata Pani, Artificial Pancreas (AP) Based on the Fractional-Order PID Controller (FOPIDC) with JAYA Optimization Technique, pp 19Springer Nature, Innovation in Electrical Power Engineering, Communication, and Computing Technology, pp 19–30, 16 December 2021
D Rath, A Kumar Patra, B Rout, D K Subudhi & S K Kar, Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller, pp 295–308, Innovation in Electrical Power Engineering, Communication, and Computing Technology,16 December 2021
A K Patra, A N, B Rout, D K Subudhi & Saswata Pani, Artificial Pancreas (AP) Based on the Fractional-Order PID Controller (FOPIDC) with JAYA Optimization Technique, pp 19Springer Nature, Innovation in Electrical Power Engineering, Communication, and Computing Technology, pp 19–30, 16 December 2021
D Rath, A Kumar Patra, B Rout, D K Subudhi & S K Kar, Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller, pp 295–308, Innovation in Electrical Power Engineering, Communication, and Computing Technology,16 December 2021
A K Patra, A N, B Rout, D K Subudhi & Saswata Pani, Artificial Pancreas (AP) Based on the Fractional-Order PID Controller (FOPIDC) with JAYA Optimization Technique, pp 19Springer Nature, Innovation in Electrical Power Engineering, Communication, and Computing Technology, pp 19–30, 16 December 2021
D Rath, A Kumar Patra, B Rout, D K Subudhi & S K Kar, Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller, pp 295–308, Innovation in Electrical Power Engineering, Communication, and Computing Technology,16 December 2021
A K Patra, A N, B Rout, D K Subudhi & Saswata Pani, Artificial Pancreas (AP) Based on the Fractional-Order PID Controller (FOPIDC) with JAYA Optimization Technique, pp 19Springer Nature, Innovation in Electrical Power Engineering, Communication, and Computing Technology, pp 19–30, 16 December 2021
D Rath, A Kumar Patra, B Rout, D K Subudhi & S K Kar, Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller, pp 295–308, Innovation in Electrical Power Engineering, Communication, and Computing Technology,16 December 2021
A K Patra, A N, B Rout, D K Subudhi & Saswata Pani, Artificial Pancreas (AP) Based on the Fractional-Order PID Controller (FOPIDC) with JAYA Optimization Technique, pp 19Springer Nature, Innovation in Electrical Power Engineering, Communication, and Computing Technology, pp 19–30, 16 December 2021
D Rath, A Kumar Patra, B Rout, D K Subudhi & S K Kar, Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller, pp 295–308, Innovation in Electrical Power Engineering, Communication, and Computing Technology,16 December 2021
A K Patra, A N, B Rout, D K Subudhi & Saswata Pani, Artificial Pancreas (AP) Based on the Fractional-Order PID Controller (FOPIDC) with JAYA Optimization Technique, pp 19Springer Nature, Innovation in Electrical Power Engineering, Communication, and Computing Technology, pp 19–30, 16 December 2021
D Rath, A Kumar Patra, B Rout, D K Subudhi & S K Kar, Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller, pp 295–308, Innovation in Electrical Power Engineering, Communication, and Computing Technology,16 December 2021
A K Patra, A N, B Rout, D K Subudhi & Saswata Pani, Artificial Pancreas (AP) Based on the Fractional-Order PID Controller (FOPIDC) with JAYA Optimization Technique, pp 19Springer Nature, Innovation in Electrical Power Engineering, Communication, and Computing Technology, pp 19–30, 16 December 2021
D Rath, A Kumar Patra, B Rout, D K Subudhi & S K Kar, Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller, pp 295–308, Innovation in Electrical Power Engineering, Communication, and Computing Technology,16 December 2021
A K Patra, A N, B Rout, D K Subudhi & Saswata Pani, Artificial Pancreas (AP) Based on the Fractional-Order PID Controller (FOPIDC) with JAYA Optimization Technique, pp 19Springer Nature, Innovation in Electrical Power Engineering, Communication, and Computing Technology, pp 19–30, 16 December 2021
D Rath, A Kumar Patra, B Rout, D K Subudhi & S K Kar, Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller, pp 295–308, Innovation in Electrical Power Engineering, Communication, and Computing Technology,16 December 2021
A K Patra, A N, B Rout, D K Subudhi & Saswata Pani, Artificial Pancreas (AP) Based on the Fractional-Order PID Controller (FOPIDC) with JAYA Optimization Technique, pp 19Springer Nature, Innovation in Electrical Power Engineering, Communication, and Computing Technology, pp 19–30, 16 December 2021
D Rath, A Kumar Patra, B Rout, D K Subudhi & S K Kar, Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller, pp 295–308, Innovation in Electrical Power Engineering, Communication, and Computing Technology,16 December 2021
A K Patra, A N, B Rout, D K Subudhi & Saswata Pani, Artificial Pancreas (AP) Based on the Fractional-Order PID Controller (FOPIDC) with JAYA Optimization Technique, pp 19Springer Nature, Innovation in Electrical Power Engineering, Communication, and Computing Technology, pp 19–30, 16 December 2021
D Rath, A Kumar Patra, B Rout, D K Subudhi & S K Kar, Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller, pp 295–308, Innovation in Electrical Power Engineering, Communication, and Computing Technology,16 December 2021
A K Patra, A N, B Rout, D K Subudhi & Saswata Pani, Artificial Pancreas (AP) Based on the Fractional-Order PID Controller (FOPIDC) with JAYA Optimization Technique, pp 19Springer Nature, Innovation in Electrical Power Engineering, Communication, and Computing Technology, pp 19–30, 16 December 2021
D Rath, A Kumar Patra, B Rout, D K Subudhi & S K Kar, Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller, pp 295–308, Innovation in Electrical Power Engineering, Communication, and Computing Technology,16 December 2021
A K Patra, A N, B Rout, D K Subudhi & Saswata Pani, Artificial Pancreas (AP) Based on the Fractional-Order PID Controller (FOPIDC) with JAYA Optimization Technique, pp 19Springer Nature, Innovation in Electrical Power Engineering, Communication, and Computing Technology, pp 19–30, 16 December 2021
D Rath, A Kumar Patra, B Rout, D K Subudhi & S K Kar, Performance Assessment of Three-Phase Standalone PV System with Machine Learning-Based Controller, pp 295–308, Innovation in Electrical Power Engineering, Communication, and Computing Technology,16 December 2021
Sahoo, S., Mahapatra, T.R., Jena, H. (2021) Constraints in Journey of Graphene from Laboratory to Life, Lecture Notes in Civil Engineering, 2021, 75, pp. 675-685. doi: 10.1007/978-981-15-4577-1_59. (IF: 0.133, SCOPUS)
S Jaypuria, TR Mahapatra, S Sahoo, O Jaypuria, (2021) Computational intelligence-based prediction of joint penetration in laser fabrication, Materials Today: Proceedings, 46(10), 4854-4858, doi: 10.1016/j.matpr.2020.10.325. (IF: 2.59, SCOPUS)
S. Patro, T. R. Mahapatra, S. Dash, V. K. Murty, (2021) Artificial intelligence techniques for fault assessment in laminated composite structure: a review, E3S Web of Conferences, 309, 01083. doi: 10.1051/e3sconf/202130901083. (IF: 0.38, SCOPUS)
D. Guru, G. K. Awari, T. R. Mahapatra, D. Mishra, and R. C. Panda, (2021) Finite Element Analysis of Natural Frequencies of Layered Composite Plate in Thermal Environment, Design Engineering, pp. 4597–4609.
N. Pattanaik, P. Bobade, T. R. Mahapatra, D. Mishra, A. Mehta, P. Bachhav, R. C. Panda, (2021) Comparative Assessment of Contact Analysis using Penalty Method and Lagrange Multiplier Method, Design Engineering, pp. 5779–5793.
S. Panda, J. K. Pradhan, Gyan Ranjan Biswal, B. Subudhi, and A. Mallick, “Development of Prototype Fractional Order Controller for A Grid-Tied Photovoltaic System,” IEEE Transactions on Circuits and Systems: Express Briefs, Vol. XX, No. Y, pp. 1-5, Nov. 2021. DOI: 10.1109/TCSII.2021.3129268 (IF: 3.691)
Z. H. Zargar, K. J. Akram, Gyan Ranjan Biswal, and T. Islam, “A Linear Capacitive Sensor for PPM Moisture Measurement in SF6 Gas Insulated Switchgear,” IEEE Transactions on Instrumentation & Measurement, Vol. 70, Art. No. 9001608, pp. 1-8, Jan. 2021. DOI: 10.1109/TIM.2020.3040880 (IF: 5.332)
Padhi, P. K., Bidya Singh. â€œDiasporic love and identity: the case of displaced during the Partitionâ€ in Turkish Online Journal of Qualitative Inquiry (TOJQI), Volume 6, July 2021, (SCOPUS indexed),e-ISSN 1309-6591 , Page No. 6072- 6077.
Padhi, P. K., M Aishvarya. â€œNeopagan and Reconstructionist Spirituality and Religion in Australiaâ€ in Kala: Journal of Indian Art History Congress, Volume 25, No-10, 2020- 2021, (UGC Care indexed) ISSN- 0975-7945, Page No. 26-32.
Development of Prototype Fractional Order Controller for a Grid-Tied Photovoltaic System, IEEE Transactions on Circuits and Systems II: Express Briefs, 69 (4), 2171-2175
Investigation on bindings of a binaphthoquinone derivative with serum albumin proteins by fluorescence spectroscopy. J. B. Baruah and B. R. Jali*, Indian Journal of Chemistry. 60A (2021) 824.
Recent Progress in Schiff Bases in Detections of Fluoride Ions. B. R. Jali and J. B. Baruah, Dyes and Pigments, 194, (2021), 109575.
A Mini-Review: Quinones and their Derivatives for Selective and Specific Detection of Specific Cations. B. R. Jali*, Biointerface Research in Applied Chemistry, 11 (2021) 11679.
A comprehensive review on quinones based fluoride selective colorimetric and fluorescence chemosensors. B. R. Jali*. A. K. Barick, P. Mohapatra and S. K. Sahoo, Journal of Fluorine Chemistry 244 (2021) 109744.
Study of Interaction between Bovine Serum Albumin and Dolutegravir Intermediate: Fluorescence and Molecular Docking Analysis. S. Behera, R. Behura, P. Mohanty, M. Sahoo, R. D. Subrahmanya, A. K. Verma and B. R. Jali*, Biointerface Research in Applied Chemistry, 11 (2021) 13102.
Sangeeta Sa and Arunanshu Mahapatro. Role-Based Channel Hopping Algorithm for a Cognitive Radio Network in Asynchronous Environment. Wireless Personal Communication, Springer. pp. 1 – 20, 2021.
Biswaranjan Sarangi and Arunanshu Mahapatro. Outlier Detection Using Convolutional Neural Network for Wireless Sensor Network. International Journal of Business Data Communications and Networking (IJBDCN). vol. 17, no. 1 pp. 1 – 16, October 2021.
V CH Sekhar Rao Rayavarapu and Arunanshu Mahapatro. NLOS identification and mitigation in UWB positioning with bagging-based ensembled classifiers. Annals of Telecommunications, Springer. pp. 1 – 14, October 2021.
Radhasyam Patro, Arunanshu Mahapatro and Amresh Sahu. Receiver design for CDMA-FBMC/ OQAM systems. Electronics Letters, IET. vol. 56, no. 16 pp. 848 – 851, 2021.
Optimum design of 3R manipulator using hybrid PSOGSA algorithm
A comprehensive study on multi-objective design optimization of spur gear
P. Patro, Dilute phase pneumatic conveying in a horizontal pipe: Effect of restitution coefficient and specularity coefficient, International Journal of Fluid Mechanics Research, 48 (1), 63-74 (2021).
Jena, S. and Panigrahi, R.,2021, Performance evaluation of sustainable geopolymer concrete produced from ferrochrome slag and silica fume, European Journal of Environmental and Civil Engineering, : https://doi.org/10.1080/19648189.2021.1886179, Taylor and Francis, SCIE
Simulation and hardware-in-the-loop real-time testing of different controllers for frequency regulation of electrical power systems
Design and analysis of the 2DOF-PIDN-FOID controller for frequency regulation of the electric power systems
Rajesh K Srivastava, Prakash Kumar Sarangi, Latika Bhatia, Akhilesh Kumar Singh, Krushna Prasad Shadangi. Conversion of methane to methanol: technologies and future challenges. Biomass Conversion and Biorefinery 12, (2021) 1851–1875.
Trinath Biswal, Krushna Prasad Shadangi, Prakash Kumar Sarangi. Application of Nanotechnology in the Production of Bio?hydrogen: A Review. Chemical Engineering Technology 44, (2021), 1–17.
Anjani RK Gollakota, Venkata Subbaiah Munagapati, Krushna Prasad Shadangi, Guda Mallikarjuna Reddy, Jet-Chau Wen, Chi-Min Shu. Encapsulating toxic Rhodamine 6G dye, and Cr (VI) metal ions from liquid phase using AlPO4-5 molecular sieves. Preparation, characterization, and adsorption parameters. Journal of Molecular Liquids 336, (2021) 116549.
Nivedita Patel, Krushna Prasad Shadangi, Pravin Kumar Kar. Characterization of waste engine oil derived pyrolytic char (WEOPC): SEM, EDX and FTIR analysis. Materials Today: Proceedings 38, 5 (2021) 2866-2870.
N. Patel &K. P. Shadangi, Study the fuel characteristics of ethanol and waste engine oil pyrolytic oil blends, Environmental Science and Pollution Research (2021)https://doi.org/10.1007/s11356-021-15281-8
N. Patel, K. P. Shadangi, P. K. Kar, Characterization of waste engine oil derived pyrolytic char (WEOPC): SEM, EDX and FTIR analysis, Materials Today: Proceedings 38 (2021) 2866-2870.
Anchal Kumawat and Sucheta Panda, “A Robust edge detection algorithm based on Feature Based Image Registration (FBIR) using Improved Canny With Fuzzy Logic (ICWFL)" ”, The Visual Computer, Springer Nature, published on-line on 14 July, 2021,Vol.38, Pages:3681-3702, DOI : http://link.springer.com/article/10.1007/s00371-021-02196-1, SCIE, Scopus, Impact Factor: 3.5, Unpaid, ISSN:1432-2315(e_ISSN),0178-2789(p_ISSN)
H.K.Paikray, P.K.Das and S.Panda, â€œOptimal Multi-robot Path Planning Using Particle Swarm Optimization Algorithm Improved by Sine and Cosine Algorithmsâ€, Arabian Journal of Science and Engineering, January,2021,
Experimental and numerical study on free vibration characteristics of laminated composite plate with/without cut-out
Free vibration behavior of angle-ply laminated composite stiffened plates
Forced vibration analysis of laminated composite stiffened plates
Numerical study of unsteady MHD second grade fluid flow and heat transfer within porous channel (S. Padhi & I. Nayak), J-Int. Journal of applied and computational mathematics, Vol 7(6), pg-1-20, ISSN No.2349-5103
Finite Difference analysis of unsteady heat and flow of an incompressible third grade fluid (I Nayak) J- Punjab University j. of Mathematics, Vol.-53(5), pg.-307-318, ISSN No.-1016-2526(2021)
"Smart Cloud Service Management Algorithm for Vehicular Clouds", Sohan Kumar Pande, Sanjaya Kumar Panda, Satyabrata Das. etal., IEEE Transactions on Intelligent Transportation Systems, DOI: 10.1109/TITS.2020.3021075,Â https://ieeexplore.ieee.org/document/9210815
"A resource Management Algorithm for Vertual Machine Migration in Vehicular Cloud Computing", Sohan Kumar Pande, Sanjaya Kumar Panda, Satyabrata Das. etal., CMC-Computers, Materials & Continua,(SCI)2021, 67(2), pp. 2647-2663, doi:10.32604/cmc.2021.015026
"A Novel Communication Framework Between MANET and WSN in IoT Based Smart Environment", Bata Krishna Tripathy, Swagat Ku. Jena, Vineeth Reddy, Satyabrata Das &Sanjaya Ku. Panda, International Journal of Information Technology(Springer)(Scopus),2021, 13(3), pp. 921-931 https://link.springer.com/article/10.1007/s41870-020-00520-x
"Harris Hawks Jaya Algorithm-Based Routing Protocol in Delay Tolerant Network", Pradosh Kumar Gantayat & Satyabrata Das, International Journal of Business Data Communications and Networking(IJBDCN), igi-global 2021,(ESCI) (Scopus), Volume 17, Issue 1, Article 3, https://www.igi-global.com/article/harris-hawks-jaya-algorithm-based-routing-protocol-in-delay-tolerant-network/271378
"Energy Efficient Routes protocols to Minimize Holes in Wireless Sensor Networks Using Probability Enhancement Algorithm", Chinmay Ku. Nayak & Satyabrata Das, International Journal of e-Collaboration (ESCI)(Scopus), Volume 17, Issue 4, Article2, DOI:10.4018/IJeC.2021100102
"Dynamic service migration and resource management for vehicular clouds", Sohan Ku. Pandey, Sanjaya Ku. Panda & Satyabrata Das, Journal of Ambient Intelligence and Humanized Computing, (SCI), DOI:10.1007/s12652-020-02166-w
A. K. Behera, D. Konhar, D. Mishra, S. N. Mishra, “Fibonacci series-inspired elliptically-slotted CPW fed UWB patch antenna with Ku band-reject characteristics”, Microwave and Optical Technology Letter, 1–6, 2021. (SCIE, SCOPUS)
Mishro, Pranaba K; Chaudhary, Bhawesh Kumar; Agrawal, Sanjay; Panda, Rutuparna; , Brain MR image segmentation using a fast fuzzy clustering approach, 2021 12th International Conference on Computing Communication and Networking Technologies (ICCCNT), Pages 1-5, IEEE
Mishro, Pranaba K; Agrawal, Sanjay; Panda, Rutuparna; Abraham, Ajith; , A novel brightness preserving joint histogram equalization technique for contrast enhancement of brain MR images, Biocybernetics and Biomedical Engineering, Volume 41.0, Number 2, Pages 540-553, Elsevier
Panda, Rutuparna; Samantaray, Leena; Das, Akankshya; Agrawal, Sanjay; Abraham, Ajith; , A novel evolutionary row class entropy based optimal multi-level thresholding technique for brain MR images, Expert Systems with Applications, Volume 168.0, Pages 114426, Pergamon
Mishro, Pranaba K; Agrawal, Sanjay; Panda, Rutuparna; Abraham, Ajith; , A survey on state-of-the-art denoising techniques for brain magnetic resonance images, IEEE Reviews in Biomedical Engineering, Volume 15.0, Pages 184-199, IEEE
Oram, E., Dash, P. B., Naik, B., Nayak, J., Vimal, S., & Nataraj, S. K. (2021). Light gradient boosting machine-based phishing webpage detection model using phisher website features of mimic URLs. Pattern Recognition Letters, 152, 100-106.
K. K. Sahu, S. C. Nayak, and H. S. Behera, â€œMulti-step-ahead exchange rate forecasting for South Asian countries using multi-verse optimized multiplicative functional link neural networks,â€ Karbala International Journal of Modern Science, vol. 7, no. 1, p. 7, 2021
Ramakrishna, D. S.; Pradhan, A. A Concise Review on the Stereoselective Synthesis of Chiral ?-Bisamides Using Stereoselective Ugi-Type Reaction. Arkivoc, 2021, 2021, 1–41. https://doi.org/10.24820/ark.5550190.p011.519. (SCI & SCOPUS)
Ramakrishna, D. S Wadsworth Emmons Cyclopropanation Mediated Diastereoselective Syntheses of ?-Epoxy- Trans-Disubstituted Cyclopropane and ?-Hydroxy-Trans-Disubstituted Cyclopropane. Chemical Data Collections, 2021, 32, 100667. https://doi.org/10.1016/j.cdc.2021.100667. (SCI & SCOPUS)
Ramakrishna, D. S.; Jose, T. J.; Praveen, P. L. Translational and Rotational Phase Ordering of Symmetric Dimer Mesogens: Molecular Rigidity Effect. Journal of Molecular Structure, 2021, 1236, 130336. https://doi.org/10.1016/j.molstruc.2021.130336. (SCI & SCOPUS)
Ramakrishna, D. S. One Pot Synthesis of Chiral Secondary Alcohols Using Noyori Asymmetric Transfer Hydrogenation and Williamson Monoetherification: Application in the Diastereoselective Syntheses of Cis Cyclopropyl Containing Molecules. Chemical Data Collections, 2021, 33, 100685. https://doi.org/10.1016/j.cdc.2021.100685. (SCI & SCOPUS)
Behera, S.; Behura, R.; Mohanty, P.; Sahoo, M.; Ramakrishna D.S. Study of Interaction Between Bovine Serum Albumin and Dolutegravir Intermediate: Fluorescence and Molecular Docking Analysis. Biointerface Research in Applied Chemistry, 2021, 11, 13102–13110. https://doi.org/10.33263/briac115.1310213110. (SCI & SCOPUS)
K. Prusty, S. Patra and S. K. Swain* â€œNano ZnO imprinted dextran hybrid poly (N-isopropylacrylamide)/poly ethylene glycol composite hydrogels for in vitro release of ciprofloxacinâ€ Materials Today Communication, 26, 101869-670, (Elsevier), (2021). (Impact Factor: 3.662) ISSN: 0925-8388. DOI: 10.1016/j.mtcomm.2020.101869.
D. Bharatia, B. Parhi and S K Swain* â€œPreparation, characterization and dielectric properties of GO based ZnO embedded mixed metal oxides ternary nanostructured compositesâ€ Journal of Alloys and Compounds, 869, 159274-82, (Elsevier), (2021). (Impact Factor: 6.317) ISSN: 03602559. DOI: doi.org/10.1016/j.jallcom.2021.159274.
P. K. Sethi, P. Mohapatra, S. Patra, D. Bharatia and S. K. Swain*â€ Antimicrobial and barrier properties of polyacrylic acid/GO hybrid nanocomposites for packaging applicationâ€ Nano-Structures & Nano-Objects, 23, 100507-100523, (Elsevier), (2021). (Impact Factor:5.454) ISSN: 2352-507X. DOI: org/10.1016/j.nanoso.2021.100747.
A. Biwal, P. Sethy and S. K. Swain* â€œChange in orientation of polyacrylic acid and chitosan networks by imprintment of gold nanoparticlesâ€ Polymer-Plastic Technology and Materials, 60(2), 182-194, (Tylor & Francis), (2021). (Impact Factor: 2.439) ISSN: 03602559. DOI:10.1080/25740881.2020.1793196.
K. Prusty and S. K. Swain* â€œPolypropylene oxide/polyethylene oxide-cellulose hybrid nanocomposite hydrogels as drug delivery vehicleâ€ Journal of Applied Polymer Science, 138(9), 49921-30, (Wiley), (2021). (Impact Factor: 3.125) ISSN: 1097-4628. DOI: 10.1002/app.20200978.
S. Behera, S. Behera and A.K. Barisal, “Dynamic Combined Economic Emission Dispatch integrating Plug-in Electric Vehicles and Renewable Energy Sources,” International Journal of Ambient Energy, pp.1-18, 2021. (Scopus) DOI: https://doi.org/10.1080/01430750.2021.1918243 ISSN: 2162-8246
S. Behera and S. Sahoo, “Design of a Pitch Controller for a Wind Turbine Using Hybrid Mean-Variance Mapping Optimization,” ECTI Transactions on Electrical Engineering, Electronics, and Communications, vol.19, no.3, pp. 298-311, 2021. (Scopus) DOI: https://doi.org/10.37936/ecti-eec.2021193.222600 ISSN: 1685-9545
G. Biswal, N. Behera, S.K. Padhan and R.N. Mohapatra, Third order symmetric duality in variational problems, Pan-American Mathematical Journal, 4 , (2021) 19-30.
P.K. Behera, S.K. Padhan and C. Nahak, Duality of control problems in general Banach spaces, International Journal of Operational Research, 42 , (2021) 358-370.
Sarada Prasanna Sahoo, Bikramaditya Das, B.B.Pati, (2021) “Path planning of bio-inspired swarm of AUVs usingdistributed path consensus algorithm.”. Journal of Engineering Science & Technology Review, 14(5).
Madhusmita Panda, Bikramaditya Das, Bidyadhar Subudhi and B.B.Pati, (2021), “Adaptive fuzzy sliding mode formationcontroller for autonomous underwater vehicles with variable payload”. International Journal ofIntelligent Unmanned Systems, 9(2), pp. 133–166.
L. Panigrahi, J. P. Panda, Devendra Kumar and S. S. Sahoo, “Analytical investigation of polar fluid flow with induced magnetic field in concentric annular region”, Heat Transfer, vol. 49, Issue 6, pp. 3943- 3957, 2020, doi: 10.1002/htj.21816, Available: https://doi.org/10.1002/htj.21816
L. Panigrahi, J.P. Panda, K. Swain and G.C. Dash, “Heat and mass transfer of MHD Casson nanofluid flow through a porous medium past a stretching sheet with Newtonian heating and chemical reaction”, Karbala International Journal of Modern Science, vol. 6, Issue 3, Article 11, Oct 2020, doi: 10.33640/ 2405-609X.1740, Available: https://doi.org/10.33640/2405-609x.1740
Padhan, S., Dash, L., Behera, S. K., & Das, S. R. (2020). Modeling and optimization of power consumption for economic analysis, energy-saving carbon footprint analysis, and sustainability assessment in finish hard turning. Process Integration and Optimization for Sustainability, 4(4), 445–463.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2020). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. Scientia Iranica, 27(6), 2838–2852.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2020). Experimental investigation on machining of hardstone quartz with modified abrasive jet machining using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
Dash, L., Padhan, S., & Das, S. R. (2020). Experimental investigations on surface integrity and chip morphology in hard turning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel. Machining Science and Technology, 24(2), 291–320.
Panda, A., Das, S. R., & Dhupal, D. (2020). Machinability investigation and sustainability assessment in finish dry hard turning with coated ceramic tool. Steel and Composite Structures, 34(5), 681–698.
Dash, L., Padhan, S., & Das, S. R. (2020). Design optimization for analysis of surface integrity and chip morphology in hard turning. Structural Engineering and Mechanics, 76(5), 561–578.
Behera, R. K., & Das, S. R. (2020). Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic. Matériaux & Techniques, 107(6), 603.
Naik, S., Das, S. R., & Dhupal, D. (2020). Analysis, predictive modelling, and multi-response optimization in electrical discharge machining of Al–22% SiC metal matrix composite for minimization of surface roughness. Manufacturing Review, 7, 20.
Pradhan, S., Tripathy, S. S., Sahu, S., Das, S. R., Jena, P. C., & Dhupal, D. (2020). Investigation on material removal rate and depth of cut of micro-holes generated on quartz using silicon carbide by FB-HAJM. Materials Today: Proceedings, 26, 2005–2012.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts. Mechanics & Industry, 21(1), 110.
Padhan, S., Dash, L., Behera, S. K., & Das, S. R. (2020). Modeling and optimization of power consumption for economic analysis, energy-saving carbon footprint analysis, and sustainability assessment in finish hard turning. Process Integration and Optimization for Sustainability, 4(4), 445–463.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2020). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. Scientia Iranica, 27(6), 2838–2852.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2020). Experimental investigation on machining of hardstone quartz with modified abrasive jet machining using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
Dash, L., Padhan, S., & Das, S. R. (2020). Experimental investigations on surface integrity and chip morphology in hard turning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel. Machining Science and Technology, 24(2), 291–320.
Panda, A., Das, S. R., & Dhupal, D. (2020). Machinability investigation and sustainability assessment in finish dry hard turning with coated ceramic tool. Steel and Composite Structures, 34(5), 681–698.
Dash, L., Padhan, S., & Das, S. R. (2020). Design optimization for analysis of surface integrity and chip morphology in hard turning. Structural Engineering and Mechanics, 76(5), 561–578.
Behera, R. K., & Das, S. R. (2020). Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic. Matériaux & Techniques, 107(6), 603.
Naik, S., Das, S. R., & Dhupal, D. (2020). Analysis, predictive modelling, and multi-response optimization in electrical discharge machining of Al–22% SiC metal matrix composite for minimization of surface roughness. Manufacturing Review, 7, 20.
Pradhan, S., Tripathy, S. S., Sahu, S., Das, S. R., Jena, P. C., & Dhupal, D. (2020). Investigation on material removal rate and depth of cut of micro-holes generated on quartz using silicon carbide by FB-HAJM. Materials Today: Proceedings, 26, 2005–2012.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts. Mechanics & Industry, 21(1), 110.
Padhan, S., Dash, L., Behera, S. K., & Das, S. R. (2020). Modeling and optimization of power consumption for economic analysis, energy-saving carbon footprint analysis, and sustainability assessment in finish hard turning. Process Integration and Optimization for Sustainability, 4(4), 445–463.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2020). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. Scientia Iranica, 27(6), 2838–2852.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2020). Experimental investigation on machining of hardstone quartz with modified abrasive jet machining using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
Dash, L., Padhan, S., & Das, S. R. (2020). Experimental investigations on surface integrity and chip morphology in hard turning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel. Machining Science and Technology, 24(2), 291–320.
Panda, A., Das, S. R., & Dhupal, D. (2020). Machinability investigation and sustainability assessment in finish dry hard turning with coated ceramic tool. Steel and Composite Structures, 34(5), 681–698.
Dash, L., Padhan, S., & Das, S. R. (2020). Design optimization for analysis of surface integrity and chip morphology in hard turning. Structural Engineering and Mechanics, 76(5), 561–578.
Behera, R. K., & Das, S. R. (2020). Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic. Matériaux & Techniques, 107(6), 603.
Naik, S., Das, S. R., & Dhupal, D. (2020). Analysis, predictive modelling, and multi-response optimization in electrical discharge machining of Al–22% SiC metal matrix composite for minimization of surface roughness. Manufacturing Review, 7, 20.
Pradhan, S., Tripathy, S. S., Sahu, S., Das, S. R., Jena, P. C., & Dhupal, D. (2020). Investigation on material removal rate and depth of cut of micro-holes generated on quartz using silicon carbide by FB-HAJM. Materials Today: Proceedings, 26, 2005–2012.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts. Mechanics & Industry, 21(1), 110.
Padhan, S., Dash, L., Behera, S. K., & Das, S. R. (2020). Modeling and optimization of power consumption for economic analysis, energy-saving carbon footprint analysis, and sustainability assessment in finish hard turning. Process Integration and Optimization for Sustainability, 4(4), 445–463.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2020). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. Scientia Iranica, 27(6), 2838–2852.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2020). Experimental investigation on machining of hardstone quartz with modified abrasive jet machining using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
Dash, L., Padhan, S., & Das, S. R. (2020). Experimental investigations on surface integrity and chip morphology in hard turning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel. Machining Science and Technology, 24(2), 291–320.
Panda, A., Das, S. R., & Dhupal, D. (2020). Machinability investigation and sustainability assessment in finish dry hard turning with coated ceramic tool. Steel and Composite Structures, 34(5), 681–698.
Dash, L., Padhan, S., & Das, S. R. (2020). Design optimization for analysis of surface integrity and chip morphology in hard turning. Structural Engineering and Mechanics, 76(5), 561–578.
Behera, R. K., & Das, S. R. (2020). Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic. Matériaux & Techniques, 107(6), 603.
Naik, S., Das, S. R., & Dhupal, D. (2020). Analysis, predictive modelling, and multi-response optimization in electrical discharge machining of Al–22% SiC metal matrix composite for minimization of surface roughness. Manufacturing Review, 7, 20.
Pradhan, S., Tripathy, S. S., Sahu, S., Das, S. R., Jena, P. C., & Dhupal, D. (2020). Investigation on material removal rate and depth of cut of micro-holes generated on quartz using silicon carbide by FB-HAJM. Materials Today: Proceedings, 26, 2005–2012.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts. Mechanics & Industry, 21(1), 110.
Padhan, S., Dash, L., Behera, S. K., & Das, S. R. (2020). Modeling and optimization of power consumption for economic analysis, energy-saving carbon footprint analysis, and sustainability assessment in finish hard turning. Process Integration and Optimization for Sustainability, 4(4), 445–463.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2020). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. Scientia Iranica, 27(6), 2838–2852.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2020). Experimental investigation on machining of hardstone quartz with modified abrasive jet machining using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
Dash, L., Padhan, S., & Das, S. R. (2020). Experimental investigations on surface integrity and chip morphology in hard turning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel. Machining Science and Technology, 24(2), 291–320.
Panda, A., Das, S. R., & Dhupal, D. (2020). Machinability investigation and sustainability assessment in finish dry hard turning with coated ceramic tool. Steel and Composite Structures, 34(5), 681–698.
Dash, L., Padhan, S., & Das, S. R. (2020). Design optimization for analysis of surface integrity and chip morphology in hard turning. Structural Engineering and Mechanics, 76(5), 561–578.
Behera, R. K., & Das, S. R. (2020). Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic. Matériaux & Techniques, 107(6), 603.
Naik, S., Das, S. R., & Dhupal, D. (2020). Analysis, predictive modelling, and multi-response optimization in electrical discharge machining of Al–22% SiC metal matrix composite for minimization of surface roughness. Manufacturing Review, 7, 20.
Pradhan, S., Tripathy, S. S., Sahu, S., Das, S. R., Jena, P. C., & Dhupal, D. (2020). Investigation on material removal rate and depth of cut of micro-holes generated on quartz using silicon carbide by FB-HAJM. Materials Today: Proceedings, 26, 2005–2012.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts. Mechanics & Industry, 21(1), 110.
Padhan, S., Dash, L., Behera, S. K., & Das, S. R. (2020). Modeling and optimization of power consumption for economic analysis, energy-saving carbon footprint analysis, and sustainability assessment in finish hard turning. Process Integration and Optimization for Sustainability, 4(4), 445–463.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2020). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. Scientia Iranica, 27(6), 2838–2852.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2020). Experimental investigation on machining of hardstone quartz with modified abrasive jet machining using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
Dash, L., Padhan, S., & Das, S. R. (2020). Experimental investigations on surface integrity and chip morphology in hard turning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel. Machining Science and Technology, 24(2), 291–320.
Panda, A., Das, S. R., & Dhupal, D. (2020). Machinability investigation and sustainability assessment in finish dry hard turning with coated ceramic tool. Steel and Composite Structures, 34(5), 681–698.
Dash, L., Padhan, S., & Das, S. R. (2020). Design optimization for analysis of surface integrity and chip morphology in hard turning. Structural Engineering and Mechanics, 76(5), 561–578.
Behera, R. K., & Das, S. R. (2020). Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic. Matériaux & Techniques, 107(6), 603.
Naik, S., Das, S. R., & Dhupal, D. (2020). Analysis, predictive modelling, and multi-response optimization in electrical discharge machining of Al–22% SiC metal matrix composite for minimization of surface roughness. Manufacturing Review, 7, 20.
Pradhan, S., Tripathy, S. S., Sahu, S., Das, S. R., Jena, P. C., & Dhupal, D. (2020). Investigation on material removal rate and depth of cut of micro-holes generated on quartz using silicon carbide by FB-HAJM. Materials Today: Proceedings, 26, 2005–2012.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts. Mechanics & Industry, 21(1), 110.
Padhan, S., Dash, L., Behera, S. K., & Das, S. R. (2020). Modeling and optimization of power consumption for economic analysis, energy-saving carbon footprint analysis, and sustainability assessment in finish hard turning. Process Integration and Optimization for Sustainability, 4(4), 445–463.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2020). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. Scientia Iranica, 27(6), 2838–2852.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2020). Experimental investigation on machining of hardstone quartz with modified abrasive jet machining using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
Dash, L., Padhan, S., & Das, S. R. (2020). Experimental investigations on surface integrity and chip morphology in hard turning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel. Machining Science and Technology, 24(2), 291–320.
Panda, A., Das, S. R., & Dhupal, D. (2020). Machinability investigation and sustainability assessment in finish dry hard turning with coated ceramic tool. Steel and Composite Structures, 34(5), 681–698.
Dash, L., Padhan, S., & Das, S. R. (2020). Design optimization for analysis of surface integrity and chip morphology in hard turning. Structural Engineering and Mechanics, 76(5), 561–578.
Behera, R. K., & Das, S. R. (2020). Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic. Matériaux & Techniques, 107(6), 603.
Naik, S., Das, S. R., & Dhupal, D. (2020). Analysis, predictive modelling, and multi-response optimization in electrical discharge machining of Al–22% SiC metal matrix composite for minimization of surface roughness. Manufacturing Review, 7, 20.
Pradhan, S., Tripathy, S. S., Sahu, S., Das, S. R., Jena, P. C., & Dhupal, D. (2020). Investigation on material removal rate and depth of cut of micro-holes generated on quartz using silicon carbide by FB-HAJM. Materials Today: Proceedings, 26, 2005–2012.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts. Mechanics & Industry, 21(1), 110.
Padhan, S., Dash, L., Behera, S. K., & Das, S. R. (2020). Modeling and optimization of power consumption for economic analysis, energy-saving carbon footprint analysis, and sustainability assessment in finish hard turning. Process Integration and Optimization for Sustainability, 4(4), 445–463.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2020). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. Scientia Iranica, 27(6), 2838–2852.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2020). Experimental investigation on machining of hardstone quartz with modified abrasive jet machining using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
Dash, L., Padhan, S., & Das, S. R. (2020). Experimental investigations on surface integrity and chip morphology in hard turning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel. Machining Science and Technology, 24(2), 291–320.
Panda, A., Das, S. R., & Dhupal, D. (2020). Machinability investigation and sustainability assessment in finish dry hard turning with coated ceramic tool. Steel and Composite Structures, 34(5), 681–698.
Dash, L., Padhan, S., & Das, S. R. (2020). Design optimization for analysis of surface integrity and chip morphology in hard turning. Structural Engineering and Mechanics, 76(5), 561–578.
Behera, R. K., & Das, S. R. (2020). Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic. Matériaux & Techniques, 107(6), 603.
Naik, S., Das, S. R., & Dhupal, D. (2020). Analysis, predictive modelling, and multi-response optimization in electrical discharge machining of Al–22% SiC metal matrix composite for minimization of surface roughness. Manufacturing Review, 7, 20.
Pradhan, S., Tripathy, S. S., Sahu, S., Das, S. R., Jena, P. C., & Dhupal, D. (2020). Investigation on material removal rate and depth of cut of micro-holes generated on quartz using silicon carbide by FB-HAJM. Materials Today: Proceedings, 26, 2005–2012.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts. Mechanics & Industry, 21(1), 110.
Padhan, S., Dash, L., Behera, S. K., & Das, S. R. (2020). Modeling and optimization of power consumption for economic analysis, energy-saving carbon footprint analysis, and sustainability assessment in finish hard turning. Process Integration and Optimization for Sustainability, 4(4), 445–463.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2020). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. Scientia Iranica, 27(6), 2838–2852.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2020). Experimental investigation on machining of hardstone quartz with modified abrasive jet machining using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
Dash, L., Padhan, S., & Das, S. R. (2020). Experimental investigations on surface integrity and chip morphology in hard turning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel. Machining Science and Technology, 24(2), 291–320.
Panda, A., Das, S. R., & Dhupal, D. (2020). Machinability investigation and sustainability assessment in finish dry hard turning with coated ceramic tool. Steel and Composite Structures, 34(5), 681–698.
Dash, L., Padhan, S., & Das, S. R. (2020). Design optimization for analysis of surface integrity and chip morphology in hard turning. Structural Engineering and Mechanics, 76(5), 561–578.
Behera, R. K., & Das, S. R. (2020). Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic. Matériaux & Techniques, 107(6), 603.
Naik, S., Das, S. R., & Dhupal, D. (2020). Analysis, predictive modelling, and multi-response optimization in electrical discharge machining of Al–22% SiC metal matrix composite for minimization of surface roughness. Manufacturing Review, 7, 20.
Pradhan, S., Tripathy, S. S., Sahu, S., Das, S. R., Jena, P. C., & Dhupal, D. (2020). Investigation on material removal rate and depth of cut of micro-holes generated on quartz using silicon carbide by FB-HAJM. Materials Today: Proceedings, 26, 2005–2012.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts. Mechanics & Industry, 21(1), 110.
Padhan, S., Dash, L., Behera, S. K., & Das, S. R. (2020). Modeling and optimization of power consumption for economic analysis, energy-saving carbon footprint analysis, and sustainability assessment in finish hard turning. Process Integration and Optimization for Sustainability, 4(4), 445–463.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2020). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. Scientia Iranica, 27(6), 2838–2852.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2020). Experimental investigation on machining of hardstone quartz with modified abrasive jet machining using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
Dash, L., Padhan, S., & Das, S. R. (2020). Experimental investigations on surface integrity and chip morphology in hard turning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel. Machining Science and Technology, 24(2), 291–320.
Panda, A., Das, S. R., & Dhupal, D. (2020). Machinability investigation and sustainability assessment in finish dry hard turning with coated ceramic tool. Steel and Composite Structures, 34(5), 681–698.
Dash, L., Padhan, S., & Das, S. R. (2020). Design optimization for analysis of surface integrity and chip morphology in hard turning. Structural Engineering and Mechanics, 76(5), 561–578.
Behera, R. K., & Das, S. R. (2020). Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic. Matériaux & Techniques, 107(6), 603.
Naik, S., Das, S. R., & Dhupal, D. (2020). Analysis, predictive modelling, and multi-response optimization in electrical discharge machining of Al–22% SiC metal matrix composite for minimization of surface roughness. Manufacturing Review, 7, 20.
Pradhan, S., Tripathy, S. S., Sahu, S., Das, S. R., Jena, P. C., & Dhupal, D. (2020). Investigation on material removal rate and depth of cut of micro-holes generated on quartz using silicon carbide by FB-HAJM. Materials Today: Proceedings, 26, 2005–2012.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts. Mechanics & Industry, 21(1), 110.
Padhan, S., Dash, L., Behera, S. K., & Das, S. R. (2020). Modeling and optimization of power consumption for economic analysis, energy-saving carbon footprint analysis, and sustainability assessment in finish hard turning. Process Integration and Optimization for Sustainability, 4(4), 445–463.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2020). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. Scientia Iranica, 27(6), 2838–2852.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2020). Experimental investigation on machining of hardstone quartz with modified abrasive jet machining using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
Dash, L., Padhan, S., & Das, S. R. (2020). Experimental investigations on surface integrity and chip morphology in hard turning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel. Machining Science and Technology, 24(2), 291–320.
Panda, A., Das, S. R., & Dhupal, D. (2020). Machinability investigation and sustainability assessment in finish dry hard turning with coated ceramic tool. Steel and Composite Structures, 34(5), 681–698.
Dash, L., Padhan, S., & Das, S. R. (2020). Design optimization for analysis of surface integrity and chip morphology in hard turning. Structural Engineering and Mechanics, 76(5), 561–578.
Behera, R. K., & Das, S. R. (2020). Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic. Matériaux & Techniques, 107(6), 603.
Naik, S., Das, S. R., & Dhupal, D. (2020). Analysis, predictive modelling, and multi-response optimization in electrical discharge machining of Al–22% SiC metal matrix composite for minimization of surface roughness. Manufacturing Review, 7, 20.
Pradhan, S., Tripathy, S. S., Sahu, S., Das, S. R., Jena, P. C., & Dhupal, D. (2020). Investigation on material removal rate and depth of cut of micro-holes generated on quartz using silicon carbide by FB-HAJM. Materials Today: Proceedings, 26, 2005–2012.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts. Mechanics & Industry, 21(1), 110.
Padhan, S., Dash, L., Behera, S. K., & Das, S. R. (2020). Modeling and optimization of power consumption for economic analysis, energy-saving carbon footprint analysis, and sustainability assessment in finish hard turning. Process Integration and Optimization for Sustainability, 4(4), 445–463.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2020). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. Scientia Iranica, 27(6), 2838–2852.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2020). Experimental investigation on machining of hardstone quartz with modified abrasive jet machining using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
Dash, L., Padhan, S., & Das, S. R. (2020). Experimental investigations on surface integrity and chip morphology in hard turning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel. Machining Science and Technology, 24(2), 291–320.
Panda, A., Das, S. R., & Dhupal, D. (2020). Machinability investigation and sustainability assessment in finish dry hard turning with coated ceramic tool. Steel and Composite Structures, 34(5), 681–698.
Dash, L., Padhan, S., & Das, S. R. (2020). Design optimization for analysis of surface integrity and chip morphology in hard turning. Structural Engineering and Mechanics, 76(5), 561–578.
Behera, R. K., & Das, S. R. (2020). Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic. Matériaux & Techniques, 107(6), 603.
Naik, S., Das, S. R., & Dhupal, D. (2020). Analysis, predictive modelling, and multi-response optimization in electrical discharge machining of Al–22% SiC metal matrix composite for minimization of surface roughness. Manufacturing Review, 7, 20.
Pradhan, S., Tripathy, S. S., Sahu, S., Das, S. R., Jena, P. C., & Dhupal, D. (2020). Investigation on material removal rate and depth of cut of micro-holes generated on quartz using silicon carbide by FB-HAJM. Materials Today: Proceedings, 26, 2005–2012.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts. Mechanics & Industry, 21(1), 110.
Narasingh Deep, Punyapriya Mishra, Layatitdev Das, “Application of adaptive neuro-fuzzy inference system (ANFIS) for predicting dielectric characteristics of CNT/PMMA nanocomposites.” Materials Today: Proceedings, 33, 5200-5205
Padhan, S., Dash, L., Behera, S. K., & Das, S. R. (2020). Modeling and optimization of power consumption for economic analysis, energy-saving carbon footprint analysis, and sustainability assessment in finish hard turning. Process Integration and Optimization for Sustainability, 4(4), 445–463.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2020). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. Scientia Iranica, 27(6), 2838–2852.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2020). Experimental investigation on machining of hardstone quartz with modified abrasive jet machining using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
Dash, L., Padhan, S., & Das, S. R. (2020). Experimental investigations on surface integrity and chip morphology in hard turning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel. Machining Science and Technology, 24(2), 291–320.
Panda, A., Das, S. R., & Dhupal, D. (2020). Machinability investigation and sustainability assessment in finish dry hard turning with coated ceramic tool. Steel and Composite Structures, 34(5), 681–698.
Dash, L., Padhan, S., & Das, S. R. (2020). Design optimization for analysis of surface integrity and chip morphology in hard turning. Structural Engineering and Mechanics, 76(5), 561–578.
Behera, R. K., & Das, S. R. (2020). Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic. Matériaux & Techniques, 107(6), 603.
Naik, S., Das, S. R., & Dhupal, D. (2020). Analysis, predictive modelling, and multi-response optimization in electrical discharge machining of Al–22% SiC metal matrix composite for minimization of surface roughness. Manufacturing Review, 7, 20.
Pradhan, S., Tripathy, S. S., Sahu, S., Das, S. R., Jena, P. C., & Dhupal, D. (2020). Investigation on material removal rate and depth of cut of micro-holes generated on quartz using silicon carbide by FB-HAJM. Materials Today: Proceedings, 26, 2005–2012.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts. Mechanics & Industry, 21(1), 110.
Padhan, S., Dash, L., Behera, S. K., & Das, S. R. (2020). Modeling and optimization of power consumption for economic analysis, energy-saving carbon footprint analysis, and sustainability assessment in finish hard turning. Process Integration and Optimization for Sustainability, 4(4), 445–463.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2020). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. Scientia Iranica, 27(6), 2838–2852.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2020). Experimental investigation on machining of hardstone quartz with modified abrasive jet machining using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
Dash, L., Padhan, S., & Das, S. R. (2020). Experimental investigations on surface integrity and chip morphology in hard turning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel. Machining Science and Technology, 24(2), 291–320.
Panda, A., Das, S. R., & Dhupal, D. (2020). Machinability investigation and sustainability assessment in finish dry hard turning with coated ceramic tool. Steel and Composite Structures, 34(5), 681–698.
Dash, L., Padhan, S., & Das, S. R. (2020). Design optimization for analysis of surface integrity and chip morphology in hard turning. Structural Engineering and Mechanics, 76(5), 561–578.
Behera, R. K., & Das, S. R. (2020). Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic. Matériaux & Techniques, 107(6), 603.
Naik, S., Das, S. R., & Dhupal, D. (2020). Analysis, predictive modelling, and multi-response optimization in electrical discharge machining of Al–22% SiC metal matrix composite for minimization of surface roughness. Manufacturing Review, 7, 20.
Pradhan, S., Tripathy, S. S., Sahu, S., Das, S. R., Jena, P. C., & Dhupal, D. (2020). Investigation on material removal rate and depth of cut of micro-holes generated on quartz using silicon carbide by FB-HAJM. Materials Today: Proceedings, 26, 2005–2012.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts. Mechanics & Industry, 21(1), 110.
67. Padhan, S., Dash, L., Behera, S. K., & Das, S. R. (2020). Modeling and optimization of power consumption for economic analysis, energy-saving carbon footprint analysis, and sustainability assessment in finish hard turning. Process Integration and Optimization for Sustainability, 4(4), 445–463.
68. Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2020). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. Scientia Iranica, 27(6), 2838–2852.
69. Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2020). Experimental investigation on machining of hardstone quartz with modified abrasive jet machining using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
70. Dash, L., Padhan, S., & Das, S. R. (2020). Experimental investigations on surface integrity and chip morphology in hard turning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
71. Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel. Machining Science and Technology, 24(2), 291–320.
72. Panda, A., Das, S. R., & Dhupal, D. (2020). Machinability investigation and sustainability assessment in finish dry hard turning with coated ceramic tool. Steel and Composite Structures, 34(5), 681–698.
73. Dash, L., Padhan, S., & Das, S. R. (2020). Design optimization for analysis of surface integrity and chip morphology in hard turning. Structural Engineering and Mechanics, 76(5), 561–578.
74. Behera, R. K., & Das, S. R. (2020). Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic. Matériaux & Techniques, 107(6), 603.
75. Naik, S., Das, S. R., & Dhupal, D. (2020). Analysis, predictive modelling, and multi-response optimization in electrical discharge machining of Al–22% SiC metal matrix composite for minimization of surface roughness. Manufacturing Review, 7, 20.
76. Pradhan, S., Tripathy, S. S., Sahu, S., Das, S. R., Jena, P. C., & Dhupal, D. (2020). Investigation on material removal rate and depth of cut of micro-holes generated on quartz using silicon carbide by FB-HAJM. Materials Today: Proceedings, 26, 2005–2012.
77. Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts. Mechanics & Industry, 21(1), 110.
67. Padhan, S., Dash, L., Behera, S. K., & Das, S. R. (2020). Modeling and optimization of power consumption for economic analysis, energy-saving carbon footprint analysis, and sustainability assessment in finish hard turning. Process Integration and Optimization for Sustainability, 4(4), 445–463.
68. Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2020). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. Scientia Iranica, 27(6), 2838–2852.
69. Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2020). Experimental investigation on machining of hardstone quartz with modified abrasive jet machining using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
70. Dash, L., Padhan, S., & Das, S. R. (2020). Experimental investigations on surface integrity and chip morphology in hard turning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42.
71. Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel. Machining Science and Technology, 24(2), 291–320.
72. Panda, A., Das, S. R., & Dhupal, D. (2020). Machinability investigation and sustainability assessment in finish dry hard turning with coated ceramic tool. Steel and Composite Structures, 34(5), 681–698.
73. Dash, L., Padhan, S., & Das, S. R. (2020). Design optimization for analysis of surface integrity and chip morphology in hard turning. Structural Engineering and Mechanics, 76(5), 561–578.
74. Behera, R. K., & Das, S. R. (2020). Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic. Matériaux & Techniques, 107(6), 603.
75. Naik, S., Das, S. R., & Dhupal, D. (2020). Analysis, predictive modelling, and multi-response optimization in electrical discharge machining of Al–22% SiC metal matrix composite for minimization of surface roughness. Manufacturing Review, 7, 20.
76. Pradhan, S., Tripathy, S. S., Sahu, S., Das, S. R., Jena, P. C., & Dhupal, D. (2020). Investigation on material removal rate and depth of cut of micro-holes generated on quartz using silicon carbide by FB-HAJM. Materials Today: Proceedings, 26, 2005–2012.
77. Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts. Mechanics & Industry, 21(1), 110.
B. Parhi, D. Bharatia and S. K. Swain* “Surfactant free green synthesis of GOSiMa hybrid nanocomposite for charge storage application” Ceramic International, 46(17), 27184-192,(Elsevier),(2020). (Impact Factor: 5.6) ISSN: 0272-8842. DOI: https://doi.org/10.1016/j.ceramint.2020.07.199
N. Sarkar, G. Sahoo and S. K. Swain* “Graphene quantum dot decorated magnetic graphene oxide filled polyvinyl alcohol hybrid hydrogel for removal of dye pollutants” Journal of Molecular Liquids, 302, 112591-112608, (Elsevier), (2020). (Impact Factor: 5.79) ISSN: 0167-7322. DOI: https://doi.org/10.1016/j.molliq.2020.112591
N. Sarkar, G. Sahoo and S. K. Swain* “Nanoclay sandwiched reduced graphene oxide filled macroporus polyacrylamide-agar hybrid hydrogel as an adsorbent for dye decontamination” Nano-Structures & Nano-Objects, 23, 100507-100523, (Elsevier), (2020). (Impact Factor:5.06) ISSN: 2352-507X. DOI: https://doi.org/10.1016/j.nanoso.2020.100507
N. Sarkar, G. Sahoo and S. K. Swain* “Reduced graphene oxide decorated superporous polyacrylamide based interpenetrating network hydrogel as dye adsorbent” Materials Chemistry and Physics, 250, 123022-123037,(Elsevier), (2020). (Impact Factor: 5.0) ISSN: 0254-0584. DOI: https://doi.org/10.1016/j.matchemphys.2020.123022
K. Prusty and S. K. Swain* “Nano ZrO2 reinforced cellulose incorporated polyethylmethacrylate/polyvinyl alcohol composite films as semiconducting packaging materials” Journal of Applied Polymer Science, 137(42), 49284, (Wiley), (2020). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.49284
D. Sahu, P. Mohapatra and S. K. Swain* “Highly orange fluorescence emission by water soluble gold nanoclusters for “turn off” sensing of Hg2+ ion” Journal of Photochemistry & Photobiology, A: Chemistry, 386, 112098, (Elsevier), (2020). (Impact Factor: 4.7) ISSN: 1010-6030. DOI: https://doi.org/10.1016/j.jphotochem.2019.112098
D. Sahu, N. Sarkar, P. Mohapatra and S. K. Swain* “Rhodamine B associated Ag/r-GO nanocomposites as ultrasensitive fluorescent sensor for Hg2+” Microchemical Journal, 154, 104577, (Elsevier), (2020). (Impact Factor: 5.1) ISSN: 0026-265X. DOI: https://doi.org/10.1016/j.microc.2019.104577
P. K. Sethi, K. Prusty, P. Mohapatra and S. K. Swain* “Nano CaCO3 embodied poly acrylic acid/dextran nanocomposites for packaging applications” Journal of Applied Polymer Science, 137 (3), 48298-308,(Wiley), (2020). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.48298
B. Parhi, D. Bharatiya and S. K. Swain* “Application of quercetin flavonoid-based hybrid nanocomposites: a review” Saudi Pharmaceutical Journal, 28(12), 1719–1732, (Elsevier), (2020). (Impact Factor: 3.8) ISSN: 1319-0164. DOI: https://doi.org/10.1016/j.jsps.2020.10.017
B. Parhi, D. Bharatia and S. K. Swain* “Surfactant free green synthesis of GOSiMa hybrid nanocomposite for charge storage application” Ceramic International, 46(17), 27184-192,(Elsevier),(2020). (Impact Factor: 5.6) ISSN: 0272-8842. DOI: https://doi.org/10.1016/j.ceramint.2020.07.199
N. Sarkar, G. Sahoo and S. K. Swain* “Graphene quantum dot decorated magnetic graphene oxide filled polyvinyl alcohol hybrid hydrogel for removal of dye pollutants” Journal of Molecular Liquids, 302, 112591-112608, (Elsevier), (2020). (Impact Factor: 5.79) ISSN: 0167-7322. DOI: https://doi.org/10.1016/j.molliq.2020.112591
N. Sarkar, G. Sahoo and S. K. Swain* “Nanoclay sandwiched reduced graphene oxide filled macroporus polyacrylamide-agar hybrid hydrogel as an adsorbent for dye decontamination” Nano-Structures & Nano-Objects, 23, 100507-100523, (Elsevier), (2020). (Impact Factor:5.06) ISSN: 2352-507X. DOI: https://doi.org/10.1016/j.nanoso.2020.100507
N. Sarkar, G. Sahoo and S. K. Swain* “Reduced graphene oxide decorated superporous polyacrylamide based interpenetrating network hydrogel as dye adsorbent” Materials Chemistry and Physics, 250, 123022-123037,(Elsevier), (2020). (Impact Factor: 5.0) ISSN: 0254-0584. DOI: https://doi.org/10.1016/j.matchemphys.2020.123022
K. Prusty and S. K. Swain* “Nano ZrO2 reinforced cellulose incorporated polyethylmethacrylate/polyvinyl alcohol composite films as semiconducting packaging materials” Journal of Applied Polymer Science, 137(42), 49284, (Wiley), (2020). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.49284
D. Sahu, P. Mohapatra and S. K. Swain* “Highly orange fluorescence emission by water soluble gold nanoclusters for “turn off” sensing of Hg2+ ion” Journal of Photochemistry & Photobiology, A: Chemistry, 386, 112098, (Elsevier), (2020). (Impact Factor: 4.7) ISSN: 1010-6030. DOI: https://doi.org/10.1016/j.jphotochem.2019.112098
D. Sahu, N. Sarkar, P. Mohapatra and S. K. Swain* “Rhodamine B associated Ag/r-GO nanocomposites as ultrasensitive fluorescent sensor for Hg2+” Microchemical Journal, 154, 104577, (Elsevier), (2020). (Impact Factor: 5.1) ISSN: 0026-265X. DOI: https://doi.org/10.1016/j.microc.2019.104577
P. K. Sethi, K. Prusty, P. Mohapatra and S. K. Swain* “Nano CaCO3 embodied poly acrylic acid/dextran nanocomposites for packaging applications” Journal of Applied Polymer Science, 137 (3), 48298-308,(Wiley), (2020). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.48298
B. Parhi, D. Bharatiya and S. K. Swain* “Application of quercetin flavonoid-based hybrid nanocomposites: a review” Saudi Pharmaceutical Journal, 28(12), 1719–1732, (Elsevier), (2020). (Impact Factor: 3.8) ISSN: 1319-0164. DOI: https://doi.org/10.1016/j.jsps.2020.10.017
B. Parhi, D. Bharatia and S. K. Swain* “Surfactant free green synthesis of GOSiMa hybrid nanocomposite for charge storage application” Ceramic International, 46(17), 27184-192,(Elsevier),(2020). (Impact Factor: 5.6) ISSN: 0272-8842. DOI: https://doi.org/10.1016/j.ceramint.2020.07.199
N. Sarkar, G. Sahoo and S. K. Swain* “Graphene quantum dot decorated magnetic graphene oxide filled polyvinyl alcohol hybrid hydrogel for removal of dye pollutants” Journal of Molecular Liquids, 302, 112591-112608, (Elsevier), (2020). (Impact Factor: 5.79) ISSN: 0167-7322. DOI: https://doi.org/10.1016/j.molliq.2020.112591
N. Sarkar, G. Sahoo and S. K. Swain* “Nanoclay sandwiched reduced graphene oxide filled macroporus polyacrylamide-agar hybrid hydrogel as an adsorbent for dye decontamination” Nano-Structures & Nano-Objects, 23, 100507-100523, (Elsevier), (2020). (Impact Factor:5.06) ISSN: 2352-507X. DOI: https://doi.org/10.1016/j.nanoso.2020.100507
N. Sarkar, G. Sahoo and S. K. Swain* “Reduced graphene oxide decorated superporous polyacrylamide based interpenetrating network hydrogel as dye adsorbent” Materials Chemistry and Physics, 250, 123022-123037,(Elsevier), (2020). (Impact Factor: 5.0) ISSN: 0254-0584. DOI: https://doi.org/10.1016/j.matchemphys.2020.123022
K. Prusty and S. K. Swain* “Nano ZrO2 reinforced cellulose incorporated polyethylmethacrylate/polyvinyl alcohol composite films as semiconducting packaging materials” Journal of Applied Polymer Science, 137(42), 49284, (Wiley), (2020). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.49284
D. Sahu, P. Mohapatra and S. K. Swain* “Highly orange fluorescence emission by water soluble gold nanoclusters for “turn off” sensing of Hg2+ ion” Journal of Photochemistry & Photobiology, A: Chemistry, 386, 112098, (Elsevier), (2020). (Impact Factor: 4.7) ISSN: 1010-6030. DOI: https://doi.org/10.1016/j.jphotochem.2019.112098
D. Sahu, N. Sarkar, P. Mohapatra and S. K. Swain* “Rhodamine B associated Ag/r-GO nanocomposites as ultrasensitive fluorescent sensor for Hg2+” Microchemical Journal, 154, 104577, (Elsevier), (2020). (Impact Factor: 5.1) ISSN: 0026-265X. DOI: https://doi.org/10.1016/j.microc.2019.104577
P. K. Sethi, K. Prusty, P. Mohapatra and S. K. Swain* “Nano CaCO3 embodied poly acrylic acid/dextran nanocomposites for packaging applications” Journal of Applied Polymer Science, 137 (3), 48298-308,(Wiley), (2020). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.48298
B. Parhi, D. Bharatiya and S. K. Swain* “Application of quercetin flavonoid-based hybrid nanocomposites: a review” Saudi Pharmaceutical Journal, 28(12), 1719–1732, (Elsevier), (2020). (Impact Factor: 3.8) ISSN: 1319-0164. DOI: https://doi.org/10.1016/j.jsps.2020.10.017
B. Parhi, D. Bharatia and S. K. Swain* “Surfactant free green synthesis of GOSiMa hybrid nanocomposite for charge storage application” Ceramic International, 46(17), 27184-192,(Elsevier),(2020). (Impact Factor: 5.6) ISSN: 0272-8842. DOI: https://doi.org/10.1016/j.ceramint.2020.07.199
N. Sarkar, G. Sahoo and S. K. Swain* “Graphene quantum dot decorated magnetic graphene oxide filled polyvinyl alcohol hybrid hydrogel for removal of dye pollutants” Journal of Molecular Liquids, 302, 112591-112608, (Elsevier), (2020). (Impact Factor: 5.79) ISSN: 0167-7322. DOI: https://doi.org/10.1016/j.molliq.2020.112591
N. Sarkar, G. Sahoo and S. K. Swain* “Nanoclay sandwiched reduced graphene oxide filled macroporus polyacrylamide-agar hybrid hydrogel as an adsorbent for dye decontamination” Nano-Structures & Nano-Objects, 23, 100507-100523, (Elsevier), (2020). (Impact Factor:5.06) ISSN: 2352-507X. DOI: https://doi.org/10.1016/j.nanoso.2020.100507
N. Sarkar, G. Sahoo and S. K. Swain* “Reduced graphene oxide decorated superporous polyacrylamide based interpenetrating network hydrogel as dye adsorbent” Materials Chemistry and Physics, 250, 123022-123037,(Elsevier), (2020). (Impact Factor: 5.0) ISSN: 0254-0584. DOI: https://doi.org/10.1016/j.matchemphys.2020.123022
K. Prusty and S. K. Swain* “Nano ZrO2 reinforced cellulose incorporated polyethylmethacrylate/polyvinyl alcohol composite films as semiconducting packaging materials” Journal of Applied Polymer Science, 137(42), 49284, (Wiley), (2020). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.49284
D. Sahu, P. Mohapatra and S. K. Swain* “Highly orange fluorescence emission by water soluble gold nanoclusters for “turn off” sensing of Hg2+ ion” Journal of Photochemistry & Photobiology, A: Chemistry, 386, 112098, (Elsevier), (2020). (Impact Factor: 4.7) ISSN: 1010-6030. DOI: https://doi.org/10.1016/j.jphotochem.2019.112098
D. Sahu, N. Sarkar, P. Mohapatra and S. K. Swain* “Rhodamine B associated Ag/r-GO nanocomposites as ultrasensitive fluorescent sensor for Hg2+” Microchemical Journal, 154, 104577, (Elsevier), (2020). (Impact Factor: 5.1) ISSN: 0026-265X. DOI: https://doi.org/10.1016/j.microc.2019.104577
P. K. Sethi, K. Prusty, P. Mohapatra and S. K. Swain* “Nano CaCO3 embodied poly acrylic acid/dextran nanocomposites for packaging applications” Journal of Applied Polymer Science, 137 (3), 48298-308,(Wiley), (2020). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.48298
B. Parhi, D. Bharatiya and S. K. Swain* “Application of quercetin flavonoid-based hybrid nanocomposites: a review” Saudi Pharmaceutical Journal, 28(12), 1719–1732, (Elsevier), (2020). (Impact Factor: 3.8) ISSN: 1319-0164. DOI: https://doi.org/10.1016/j.jsps.2020.10.017
B. Parhi, D. Bharatia and S. K. Swain* “Surfactant free green synthesis of GOSiMa hybrid nanocomposite for charge storage application” Ceramic International, 46(17), 27184-192,(Elsevier),(2020). (Impact Factor: 5.6) ISSN: 0272-8842. DOI: https://doi.org/10.1016/j.ceramint.2020.07.199
N. Sarkar, G. Sahoo and S. K. Swain* “Graphene quantum dot decorated magnetic graphene oxide filled polyvinyl alcohol hybrid hydrogel for removal of dye pollutants” Journal of Molecular Liquids, 302, 112591-112608, (Elsevier), (2020). (Impact Factor: 5.79) ISSN: 0167-7322. DOI: https://doi.org/10.1016/j.molliq.2020.112591
N. Sarkar, G. Sahoo and S. K. Swain* “Nanoclay sandwiched reduced graphene oxide filled macroporus polyacrylamide-agar hybrid hydrogel as an adsorbent for dye decontamination” Nano-Structures & Nano-Objects, 23, 100507-100523, (Elsevier), (2020). (Impact Factor:5.06) ISSN: 2352-507X. DOI: https://doi.org/10.1016/j.nanoso.2020.100507
N. Sarkar, G. Sahoo and S. K. Swain* “Reduced graphene oxide decorated superporous polyacrylamide based interpenetrating network hydrogel as dye adsorbent” Materials Chemistry and Physics, 250, 123022-123037,(Elsevier), (2020). (Impact Factor: 5.0) ISSN: 0254-0584. DOI: https://doi.org/10.1016/j.matchemphys.2020.123022
K. Prusty and S. K. Swain* “Nano ZrO2 reinforced cellulose incorporated polyethylmethacrylate/polyvinyl alcohol composite films as semiconducting packaging materials” Journal of Applied Polymer Science, 137(42), 49284, (Wiley), (2020). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.49284
D. Sahu, P. Mohapatra and S. K. Swain* “Highly orange fluorescence emission by water soluble gold nanoclusters for “turn off” sensing of Hg2+ ion” Journal of Photochemistry & Photobiology, A: Chemistry, 386, 112098, (Elsevier), (2020). (Impact Factor: 4.7) ISSN: 1010-6030. DOI: https://doi.org/10.1016/j.jphotochem.2019.112098
D. Sahu, N. Sarkar, P. Mohapatra and S. K. Swain* “Rhodamine B associated Ag/r-GO nanocomposites as ultrasensitive fluorescent sensor for Hg2+” Microchemical Journal, 154, 104577, (Elsevier), (2020). (Impact Factor: 5.1) ISSN: 0026-265X. DOI: https://doi.org/10.1016/j.microc.2019.104577
P. K. Sethi, K. Prusty, P. Mohapatra and S. K. Swain* “Nano CaCO3 embodied poly acrylic acid/dextran nanocomposites for packaging applications” Journal of Applied Polymer Science, 137 (3), 48298-308,(Wiley), (2020). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.48298
B. Parhi, D. Bharatiya and S. K. Swain* “Application of quercetin flavonoid-based hybrid nanocomposites: a review” Saudi Pharmaceutical Journal, 28(12), 1719–1732, (Elsevier), (2020). (Impact Factor: 3.8) ISSN: 1319-0164. DOI: https://doi.org/10.1016/j.jsps.2020.10.017
B. Parhi, D. Bharatia and S. K. Swain* “Surfactant free green synthesis of GOSiMa hybrid nanocomposite for charge storage application” Ceramic International, 46(17), 27184-192,(Elsevier),(2020). (Impact Factor: 5.6) ISSN: 0272-8842. DOI: https://doi.org/10.1016/j.ceramint.2020.07.199
N. Sarkar, G. Sahoo and S. K. Swain* “Graphene quantum dot decorated magnetic graphene oxide filled polyvinyl alcohol hybrid hydrogel for removal of dye pollutants” Journal of Molecular Liquids, 302, 112591-112608, (Elsevier), (2020). (Impact Factor: 5.79) ISSN: 0167-7322. DOI: https://doi.org/10.1016/j.molliq.2020.112591
N. Sarkar, G. Sahoo and S. K. Swain* “Nanoclay sandwiched reduced graphene oxide filled macroporus polyacrylamide-agar hybrid hydrogel as an adsorbent for dye decontamination” Nano-Structures & Nano-Objects, 23, 100507-100523, (Elsevier), (2020). (Impact Factor:5.06) ISSN: 2352-507X. DOI: https://doi.org/10.1016/j.nanoso.2020.100507
N. Sarkar, G. Sahoo and S. K. Swain* “Reduced graphene oxide decorated superporous polyacrylamide based interpenetrating network hydrogel as dye adsorbent” Materials Chemistry and Physics, 250, 123022-123037,(Elsevier), (2020). (Impact Factor: 5.0) ISSN: 0254-0584. DOI: https://doi.org/10.1016/j.matchemphys.2020.123022
K. Prusty and S. K. Swain* “Nano ZrO2 reinforced cellulose incorporated polyethylmethacrylate/polyvinyl alcohol composite films as semiconducting packaging materials” Journal of Applied Polymer Science, 137(42), 49284, (Wiley), (2020). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.49284
D. Sahu, P. Mohapatra and S. K. Swain* “Highly orange fluorescence emission by water soluble gold nanoclusters for “turn off” sensing of Hg2+ ion” Journal of Photochemistry & Photobiology, A: Chemistry, 386, 112098, (Elsevier), (2020). (Impact Factor: 4.7) ISSN: 1010-6030. DOI: https://doi.org/10.1016/j.jphotochem.2019.112098
D. Sahu, N. Sarkar, P. Mohapatra and S. K. Swain* “Rhodamine B associated Ag/r-GO nanocomposites as ultrasensitive fluorescent sensor for Hg2+” Microchemical Journal, 154, 104577, (Elsevier), (2020). (Impact Factor: 5.1) ISSN: 0026-265X. DOI: https://doi.org/10.1016/j.microc.2019.104577
P. K. Sethi, K. Prusty, P. Mohapatra and S. K. Swain* “Nano CaCO3 embodied poly acrylic acid/dextran nanocomposites for packaging applications” Journal of Applied Polymer Science, 137 (3), 48298-308,(Wiley), (2020). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.48298
B. Parhi, D. Bharatiya and S. K. Swain* “Application of quercetin flavonoid-based hybrid nanocomposites: a review” Saudi Pharmaceutical Journal, 28(12), 1719–1732, (Elsevier), (2020). (Impact Factor: 3.8) ISSN: 1319-0164. DOI: https://doi.org/10.1016/j.jsps.2020.10.017
B. Parhi, D. Bharatia and S. K. Swain* “Surfactant free green synthesis of GOSiMa hybrid nanocomposite for charge storage application” Ceramic International, 46(17), 27184-192,(Elsevier),(2020). (Impact Factor: 5.6) ISSN: 0272-8842. DOI: https://doi.org/10.1016/j.ceramint.2020.07.199
N. Sarkar, G. Sahoo and S. K. Swain* “Graphene quantum dot decorated magnetic graphene oxide filled polyvinyl alcohol hybrid hydrogel for removal of dye pollutants” Journal of Molecular Liquids, 302, 112591-112608, (Elsevier), (2020). (Impact Factor: 5.79) ISSN: 0167-7322. DOI: https://doi.org/10.1016/j.molliq.2020.112591
N. Sarkar, G. Sahoo and S. K. Swain* “Nanoclay sandwiched reduced graphene oxide filled macroporus polyacrylamide-agar hybrid hydrogel as an adsorbent for dye decontamination” Nano-Structures & Nano-Objects, 23, 100507-100523, (Elsevier), (2020). (Impact Factor:5.06) ISSN: 2352-507X. DOI: https://doi.org/10.1016/j.nanoso.2020.100507
N. Sarkar, G. Sahoo and S. K. Swain* “Reduced graphene oxide decorated superporous polyacrylamide based interpenetrating network hydrogel as dye adsorbent” Materials Chemistry and Physics, 250, 123022-123037,(Elsevier), (2020). (Impact Factor: 5.0) ISSN: 0254-0584. DOI: https://doi.org/10.1016/j.matchemphys.2020.123022
K. Prusty and S. K. Swain* “Nano ZrO2 reinforced cellulose incorporated polyethylmethacrylate/polyvinyl alcohol composite films as semiconducting packaging materials” Journal of Applied Polymer Science, 137(42), 49284, (Wiley), (2020). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.49284
D. Sahu, P. Mohapatra and S. K. Swain* “Highly orange fluorescence emission by water soluble gold nanoclusters for “turn off” sensing of Hg2+ ion” Journal of Photochemistry & Photobiology, A: Chemistry, 386, 112098, (Elsevier), (2020). (Impact Factor: 4.7) ISSN: 1010-6030. DOI: https://doi.org/10.1016/j.jphotochem.2019.112098
D. Sahu, N. Sarkar, P. Mohapatra and S. K. Swain* “Rhodamine B associated Ag/r-GO nanocomposites as ultrasensitive fluorescent sensor for Hg2+” Microchemical Journal, 154, 104577, (Elsevier), (2020). (Impact Factor: 5.1) ISSN: 0026-265X. DOI: https://doi.org/10.1016/j.microc.2019.104577
P. K. Sethi, K. Prusty, P. Mohapatra and S. K. Swain* “Nano CaCO3 embodied poly acrylic acid/dextran nanocomposites for packaging applications” Journal of Applied Polymer Science, 137 (3), 48298-308,(Wiley), (2020). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.48298
B. Parhi, D. Bharatiya and S. K. Swain* “Application of quercetin flavonoid-based hybrid nanocomposites: a review” Saudi Pharmaceutical Journal, 28(12), 1719–1732, (Elsevier), (2020). (Impact Factor: 3.8) ISSN: 1319-0164. DOI: https://doi.org/10.1016/j.jsps.2020.10.017
B. Parhi, D. Bharatia and S. K. Swain* “Surfactant free green synthesis of GOSiMa hybrid nanocomposite for charge storage application” Ceramic International, 46(17), 27184-192,(Elsevier),(2020). (Impact Factor: 5.6) ISSN: 0272-8842. DOI: https://doi.org/10.1016/j.ceramint.2020.07.199
N. Sarkar, G. Sahoo and S. K. Swain* “Graphene quantum dot decorated magnetic graphene oxide filled polyvinyl alcohol hybrid hydrogel for removal of dye pollutants” Journal of Molecular Liquids, 302, 112591-112608, (Elsevier), (2020). (Impact Factor: 5.79) ISSN: 0167-7322. DOI: https://doi.org/10.1016/j.molliq.2020.112591
N. Sarkar, G. Sahoo and S. K. Swain* “Nanoclay sandwiched reduced graphene oxide filled macroporus polyacrylamide-agar hybrid hydrogel as an adsorbent for dye decontamination” Nano-Structures & Nano-Objects, 23, 100507-100523, (Elsevier), (2020). (Impact Factor:5.06) ISSN: 2352-507X. DOI: https://doi.org/10.1016/j.nanoso.2020.100507
N. Sarkar, G. Sahoo and S. K. Swain* “Reduced graphene oxide decorated superporous polyacrylamide based interpenetrating network hydrogel as dye adsorbent” Materials Chemistry and Physics, 250, 123022-123037,(Elsevier), (2020). (Impact Factor: 5.0) ISSN: 0254-0584. DOI: https://doi.org/10.1016/j.matchemphys.2020.123022
K. Prusty and S. K. Swain* “Nano ZrO2 reinforced cellulose incorporated polyethylmethacrylate/polyvinyl alcohol composite films as semiconducting packaging materials” Journal of Applied Polymer Science, 137(42), 49284, (Wiley), (2020). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.49284
D. Sahu, P. Mohapatra and S. K. Swain* “Highly orange fluorescence emission by water soluble gold nanoclusters for “turn off” sensing of Hg2+ ion” Journal of Photochemistry & Photobiology, A: Chemistry, 386, 112098, (Elsevier), (2020). (Impact Factor: 4.7) ISSN: 1010-6030. DOI: https://doi.org/10.1016/j.jphotochem.2019.112098
D. Sahu, N. Sarkar, P. Mohapatra and S. K. Swain* “Rhodamine B associated Ag/r-GO nanocomposites as ultrasensitive fluorescent sensor for Hg2+” Microchemical Journal, 154, 104577, (Elsevier), (2020). (Impact Factor: 5.1) ISSN: 0026-265X. DOI: https://doi.org/10.1016/j.microc.2019.104577
P. K. Sethi, K. Prusty, P. Mohapatra and S. K. Swain* “Nano CaCO3 embodied poly acrylic acid/dextran nanocomposites for packaging applications” Journal of Applied Polymer Science, 137 (3), 48298-308,(Wiley), (2020). (Impact Factor: 2.8) ISSN: 1097-4628. DOI: https://doi.org/10.1002/app.48298
B. Parhi, D. Bharatiya and S. K. Swain* “Application of quercetin flavonoid-based hybrid nanocomposites: a review” Saudi Pharmaceutical Journal, 28(12), 1719–1732, (Elsevier), (2020). (Impact Factor: 3.8) ISSN: 1319-0164. DOI: https://doi.org/10.1016/j.jsps.2020.10.017
Padhi, P. K., Bidya Singh. â€œBridging the Self and its Identity Through the Works of Vikram Sethâ€ in International Journal of Psychosocial Rehabilitation, Vol. 24, Issue 03, 2020 (SCOPUS indexed), ISSN:1475-7192, Page no.- 1978-82.
Padhi, P. K. â€œLife Skills Through Englishâ€ in UGC CARE Listed Journal Our Heritage, Volume-68, Issue-30, February 2020, ISSN: o474-9030, Page no.- 6838.
Padhi, P. K. â€œAn Empirical Study of Robert Frostâ€™s Stopping by Woods on a Snowy Eveningâ€ in UGC CARE Listed Journal Our Heritage, Volume-68, Issue-1, January 2020, ISSN: o474-9030, Page no. 10575.
Padhi, P. K., Avisek Pattnaik. â€œA Journey of Africa through the Heart of Darkness by Joseph Conrad as an Outsider and Things Fall Apart by Chinua Achebe as an Insiderâ€ in Journal of Critical Reviews, Volume-7, Issue-2, 2020, ISSN: 2394-5125, (SCOPUS indexed), Page no. 167.
Padhi, P. K., Bidya Singh. â€œBridging the Self and its Identity Through the Works of Vikram Sethâ€ in International Journal of Psychosocial Rehabilitation, Vol. 24, Issue 03, 2020 (SCOPUS indexed), ISSN:1475-7192, Page no.- 1978-82.
Padhi, P. K. â€œLife Skills Through Englishâ€ in UGC CARE Listed Journal Our Heritage, Volume-68, Issue-30, February 2020, ISSN: o474-9030, Page no.- 6838.
Padhi, P. K. â€œAn Empirical Study of Robert Frostâ€™s Stopping by Woods on a Snowy Eveningâ€ in UGC CARE Listed Journal Our Heritage, Volume-68, Issue-1, January 2020, ISSN: o474-9030, Page no. 10575.
Padhi, P. K., Avisek Pattnaik. â€œA Journey of Africa through the Heart of Darkness by Joseph Conrad as an Outsider and Things Fall Apart by Chinua Achebe as an Insiderâ€ in Journal of Critical Reviews, Volume-7, Issue-2, 2020, ISSN: 2394-5125, (SCOPUS indexed), Page no. 167.
Padhi, P. K., Bidya Singh. â€œBridging the Self and its Identity Through the Works of Vikram Sethâ€ in International Journal of Psychosocial Rehabilitation, Vol. 24, Issue 03, 2020 (SCOPUS indexed), ISSN:1475-7192, Page no.- 1978-82.
Padhi, P. K. â€œLife Skills Through Englishâ€ in UGC CARE Listed Journal Our Heritage, Volume-68, Issue-30, February 2020, ISSN: o474-9030, Page no.- 6838.
Padhi, P. K. â€œAn Empirical Study of Robert Frostâ€™s Stopping by Woods on a Snowy Eveningâ€ in UGC CARE Listed Journal Our Heritage, Volume-68, Issue-1, January 2020, ISSN: o474-9030, Page no. 10575.
Padhi, P. K., Avisek Pattnaik. â€œA Journey of Africa through the Heart of Darkness by Joseph Conrad as an Outsider and Things Fall Apart by Chinua Achebe as an Insiderâ€ in Journal of Critical Reviews, Volume-7, Issue-2, 2020, ISSN: 2394-5125, (SCOPUS indexed), Page no. 167.
Padhi, P. K., Bidya Singh. â€œBridging the Self and its Identity Through the Works of Vikram Sethâ€ in International Journal of Psychosocial Rehabilitation, Vol. 24, Issue 03, 2020 (SCOPUS indexed), ISSN:1475-7192, Page no.- 1978-82.
Padhi, P. K. â€œLife Skills Through Englishâ€ in UGC CARE Listed Journal Our Heritage, Volume-68, Issue-30, February 2020, ISSN: o474-9030, Page no.- 6838.
Padhi, P. K. â€œAn Empirical Study of Robert Frostâ€™s Stopping by Woods on a Snowy Eveningâ€ in UGC CARE Listed Journal Our Heritage, Volume-68, Issue-1, January 2020, ISSN: o474-9030, Page no. 10575.
Padhi, P. K., Avisek Pattnaik. â€œA Journey of Africa through the Heart of Darkness by Joseph Conrad as an Outsider and Things Fall Apart by Chinua Achebe as an Insiderâ€ in Journal of Critical Reviews, Volume-7, Issue-2, 2020, ISSN: 2394-5125, (SCOPUS indexed), Page no. 167.
A. Mohanty, B. Rout, "Modified P & O MPPT and Voltage control Inverter based Island solar PV with power quality analysis under the varying load and weather conditions", IEEE conference onInternational Symposium on Sustainable Energy, Signal Processing & Cyber Security- (ISSSC-2020), 16-17 Dec,2020, GIET University, Gunupur, India. 10.1109/iSSSC50941.2020.9358852
A. Pattnaik, B. Rout, A.K. Patra, Comparative Study of System Performances Using Integral Type LQR with DE and ZN Optimized PID Controller in AVR Systems, "Advances in Electrical Control and Signal Systems", Springer, pp. 349-359, 2020, 10.1007/978-981-15-5262-5_25, July 2020
A. Mohanty, B. Rout, "Modified P & O MPPT and Voltage control Inverter based Island solar PV with power quality analysis under the varying load and weather conditions", IEEE conference onInternational Symposium on Sustainable Energy, Signal Processing & Cyber Security- (ISSSC-2020), 16-17 Dec,2020, GIET University, Gunupur, India. 10.1109/iSSSC50941.2020.9358852
A. Pattnaik, B. Rout, A.K. Patra, Comparative Study of System Performances Using Integral Type LQR with DE and ZN Optimized PID Controller in AVR Systems, "Advances in Electrical Control and Signal Systems", Springer, pp. 349-359, 2020, 10.1007/978-981-15-5262-5_25, July 2020
A. Mohanty, B. Rout, "Modified P & O MPPT and Voltage control Inverter based Island solar PV with power quality analysis under the varying load and weather conditions", IEEE conference onInternational Symposium on Sustainable Energy, Signal Processing & Cyber Security- (ISSSC-2020), 16-17 Dec,2020, GIET University, Gunupur, India. 10.1109/iSSSC50941.2020.9358852
A. Pattnaik, B. Rout, A.K. Patra, Comparative Study of System Performances Using Integral Type LQR with DE and ZN Optimized PID Controller in AVR Systems, "Advances in Electrical Control and Signal Systems", Springer, pp. 349-359, 2020, 10.1007/978-981-15-5262-5_25, July 2020
A. Mohanty, B. Rout, "Modified P & O MPPT and Voltage control Inverter based Island solar PV with power quality analysis under the varying load and weather conditions", IEEE conference onInternational Symposium on Sustainable Energy, Signal Processing & Cyber Security- (ISSSC-2020), 16-17 Dec,2020, GIET University, Gunupur, India. 10.1109/iSSSC50941.2020.9358852
A. Pattnaik, B. Rout, A.K. Patra, Comparative Study of System Performances Using Integral Type LQR with DE and ZN Optimized PID Controller in AVR Systems, "Advances in Electrical Control and Signal Systems", Springer, pp. 349-359, 2020, 10.1007/978-981-15-5262-5_25, July 2020
A. Mohanty, B. Rout, "Modified P & O MPPT and Voltage control Inverter based Island solar PV with power quality analysis under the varying load and weather conditions", IEEE conference onInternational Symposium on Sustainable Energy, Signal Processing & Cyber Security- (ISSSC-2020), 16-17 Dec,2020, GIET University, Gunupur, India. 10.1109/iSSSC50941.2020.9358852
A. Pattnaik, B. Rout, A.K. Patra, Comparative Study of System Performances Using Integral Type LQR with DE and ZN Optimized PID Controller in AVR Systems, "Advances in Electrical Control and Signal Systems", Springer, pp. 349-359, 2020, 10.1007/978-981-15-5262-5_25, July 2020
A. Mohanty, B. Rout, "Modified P & O MPPT and Voltage control Inverter based Island solar PV with power quality analysis under the varying load and weather conditions", IEEE conference onInternational Symposium on Sustainable Energy, Signal Processing & Cyber Security- (ISSSC-2020), 16-17 Dec,2020, GIET University, Gunupur, India. 10.1109/iSSSC50941.2020.9358852
A. Pattnaik, B. Rout, A.K. Patra, Comparative Study of System Performances Using Integral Type LQR with DE and ZN Optimized PID Controller in AVR Systems, "Advances in Electrical Control and Signal Systems", Springer, pp. 349-359, 2020, 10.1007/978-981-15-5262-5_25, July 2020
"A Novel Energy-efficient Sensor Cloud Model using Data Prediction and Forecasting Techniques", Kalyan Das, Satyabrata Das &Aurobindo Mohapatra, Karbala International Journal of Modern Science(Scopus). Vol. 6 Issue 3 Article 5, https://kijoms.uokerbala.edu.iq/home/vol6/iss3/5
"Energy Competent Hierarchical Routing Protocol for detecting and minimizing holes in wireless sensor networks", Chinmaya Ku. Nayak & Satyabrata Das, Journal of the ACM (Journal of the Association for Computing Machinery)(Scopus).Vol.xxxSlno.xxx 2020(Accepted)
"Data Prediction and Forecasting Techniques Based Energy Efficient Cloud-integrated Sensor Network", Kalyan Das & Satyabrata Das, Science & Technology Asia(Scopus) Vol. 25 No 4 Article 7 2020,https://ph02.tci-thaijo.org/index.php/SciTechAsia
"An Adaptive Secure and Efficient Routing Protocol for Mobile Ad Hoc Networks", Bata Krishna Tripathy, Swagat Kumar Jena, Padma Lochan Bera & Satyabrata Das, Wireless Personal Communications,(SCI), DOI: https://doi.org/10.1007/s11277-020-07423-x
"Energy efficient sensor series with irregular communication interval in wireless sensor networks to minimize holes", Chinmaya Kumar Nayak & Satyabrata Das, International Journal of Advanced Science and Technology, (Scopus) Vol. 29 ,No. 4s,PP.1962-1967(2020),(Scopus), http://sersc.org/journals/index.php/IJAST/article/view/7014
"Distribution of sensor nodes for detection of energy holes using local sensor distribution algorithm in wireless sensor networks", Chinmaya Kumar Nayak & Satyabrata Das, Test Engineering and Management,(Scopus) Vol. 82(Jan/Feb 2020): 6177-6182 (Scopus), http://testmagzine.biz/index.php/testmagzine/article/view/1813
Rabiranjan, P., & Trinath, B. (2020). Physico-chemical, bacteriological and health hazard effect analysis of the water in Taladanda Canal, Paradip area, Odisha, India. Journal of Groundwater Science and Engineering, 8(4), 338-348. (Scopus, ESCI).
Pradhan, D., Sukla, L. B., Pattanaik, A., Samal, D. K., Biswal, T., & Jena, S. K. B. (2021). Improvement in metal dissolution from spent catalyst by adapted Acidithiobacillus ferrooxidans. Biointerface Research in Applied Chemistry,11, 7794-7803. (Scopus, SCI, IF: 0.247).
Prusty, R. & Biswal T*(2020), Assessment of Water Quality Index and Modelling of Taldanda Canal and Mahanadi River in Paradip area, Odisha, India, Asian Journal of Water, Environment and Pollution, 17 (4), 59-72. (Scopus).
Swain, P. K.& Biswal T*(2020), Assessment of Air Quality and its impact in and around Jharsuguda, Odisha, India, and prediction modeling by using Regression Analysis, Indian Journal of Environmental Protection. 41(5), 513-521
Panda, P. K., Biswal, T., Dash, P. K*., & Panda, R. B. (2020). Assessment Of Pollution Load In Terms of Water Quality Index of Salandi River in The Command Area of Hadagada Dam And Its Downstream, Bhadrak, Odisha. Studies, 1(2), 8-16. (Scopus).
Barik, P., Biswal, T* (2020) Assessment, analysis and evaluation of Noise Level of Steel city Rourkela, Orissa, India, Indian Journal of Environmental Protection, 40(7), 764-768. (Scopus).
Priyadarsini, M., & Biswal, T*. (2020). Recent progress on the design and applications of guar gum based nano hydrogel “guar gum-P(HEMA-co-AM)/chicken eggshell” as superabsorbent. Egyptian Journal of Chemistry, 63(3), 851-859. (Scopus, ESCI).
Swain, P. K., Biswal, T*., & Panda, R. B. (2020). A short review on solid waste generations, recycling, and management in the present scenario of India. Journal. of Industrial Pollution Control, 34(1), 2008-2014.
Biswal, T*., Mohanty, B., Panda P. K, Panda, R. B (2018) Analysis and Treatment of industrial effluents of Balesore town: a way for water Analysis and Management, Journal of Applicable Chemistry, 7 (5), 1381-1387.
A. Mohanty, B. Rout, "Modified P & O MPPT and Voltage control Inverter based Island solar PV with power quality analysis under the varying load and weather conditions", IEEE conference onInternational Symposium on Sustainable Energy, Signal Processing & Cyber Security- (ISSSC-2020), 16-17 Dec,2020, GIET University, Gunupur, India. 10.1109/iSSSC50941.2020.9358852
A. Pattnaik, B. Rout, A.K. Patra, Comparative Study of System Performances Using Integral Type LQR with DE and ZN Optimized PID Controller in AVR Systems, "Advances in Electrical Control and Signal Systems", Springer, pp. 349-359, 2020, 10.1007/978-981-15-5262-5_25, July 2020
A. Mohanty, B. Rout, "Modified P & O MPPT and Voltage control Inverter based Island solar PV with power quality analysis under the varying load and weather conditions", IEEE conference onInternational Symposium on Sustainable Energy, Signal Processing & Cyber Security- (ISSSC-2020), 16-17 Dec,2020, GIET University, Gunupur, India. 10.1109/iSSSC50941.2020.9358852
A. Pattnaik, B. Rout, A.K. Patra, Comparative Study of System Performances Using Integral Type LQR with DE and ZN Optimized PID Controller in AVR Systems, "Advances in Electrical Control and Signal Systems", Springer, pp. 349-359, 2020, 10.1007/978-981-15-5262-5_25, July 2020
A. Mohanty, B. Rout, "Modified P & O MPPT and Voltage control Inverter based Island solar PV with power quality analysis under the varying load and weather conditions", IEEE conference onInternational Symposium on Sustainable Energy, Signal Processing & Cyber Security- (ISSSC-2020), 16-17 Dec,2020, GIET University, Gunupur, India. 10.1109/iSSSC50941.2020.9358852
A. Pattnaik, B. Rout, A.K. Patra, Comparative Study of System Performances Using Integral Type LQR with DE and ZN Optimized PID Controller in AVR Systems, "Advances in Electrical Control and Signal Systems", Springer, pp. 349-359, 2020, 10.1007/978-981-15-5262-5_25, July 2020
A. Mohanty, B. Rout, "Modified P & O MPPT and Voltage control Inverter based Island solar PV with power quality analysis under the varying load and weather conditions", IEEE conference onInternational Symposium on Sustainable Energy, Signal Processing & Cyber Security- (ISSSC-2020), 16-17 Dec,2020, GIET University, Gunupur, India. 10.1109/iSSSC50941.2020.9358852
A. Pattnaik, B. Rout, A.K. Patra, Comparative Study of System Performances Using Integral Type LQR with DE and ZN Optimized PID Controller in AVR Systems, "Advances in Electrical Control and Signal Systems", Springer, pp. 349-359, 2020, 10.1007/978-981-15-5262-5_25, July 2020
A. Mohanty, B. Rout, "Modified P & O MPPT and Voltage control Inverter based Island solar PV with power quality analysis under the varying load and weather conditions", IEEE conference onInternational Symposium on Sustainable Energy, Signal Processing & Cyber Security- (ISSSC-2020), 16-17 Dec,2020, GIET University, Gunupur, India. 10.1109/iSSSC50941.2020.9358852
A. Pattnaik, B. Rout, A.K. Patra, Comparative Study of System Performances Using Integral Type LQR with DE and ZN Optimized PID Controller in AVR Systems, "Advances in Electrical Control and Signal Systems", Springer, pp. 349-359, 2020, 10.1007/978-981-15-5262-5_25, July 2020
A. Mohanty, B. Rout, "Modified P & O MPPT and Voltage control Inverter based Island solar PV with power quality analysis under the varying load and weather conditions", IEEE conference onInternational Symposium on Sustainable Energy, Signal Processing & Cyber Security- (ISSSC-2020), 16-17 Dec,2020, GIET University, Gunupur, India. 10.1109/iSSSC50941.2020.9358852
A. Pattnaik, B. Rout, A.K. Patra, Comparative Study of System Performances Using Integral Type LQR with DE and ZN Optimized PID Controller in AVR Systems, "Advances in Electrical Control and Signal Systems", Springer, pp. 349-359, 2020, 10.1007/978-981-15-5262-5_25, July 2020
A. Mohanty, B. Rout, "Modified P & O MPPT and Voltage control Inverter based Island solar PV with power quality analysis under the varying load and weather conditions", IEEE conference onInternational Symposium on Sustainable Energy, Signal Processing & Cyber Security- (ISSSC-2020), 16-17 Dec,2020, GIET University, Gunupur, India. 10.1109/iSSSC50941.2020.9358852
A. Pattnaik, B. Rout, A.K. Patra, Comparative Study of System Performances Using Integral Type LQR with DE and ZN Optimized PID Controller in AVR Systems, "Advances in Electrical Control and Signal Systems", Springer, pp. 349-359, 2020, 10.1007/978-981-15-5262-5_25, July 2020
A. Mohanty, B. Rout, "Modified P & O MPPT and Voltage control Inverter based Island solar PV with power quality analysis under the varying load and weather conditions", IEEE conference onInternational Symposium on Sustainable Energy, Signal Processing & Cyber Security- (ISSSC-2020), 16-17 Dec,2020, GIET University, Gunupur, India. 10.1109/iSSSC50941.2020.9358852
A. Pattnaik, B. Rout, A.K. Patra, Comparative Study of System Performances Using Integral Type LQR with DE and ZN Optimized PID Controller in AVR Systems, "Advances in Electrical Control and Signal Systems", Springer, pp. 349-359, 2020, 10.1007/978-981-15-5262-5_25, July 2020
A. Mohanty, B. Rout, "Modified P & O MPPT and Voltage control Inverter based Island solar PV with power quality analysis under the varying load and weather conditions", IEEE conference onInternational Symposium on Sustainable Energy, Signal Processing & Cyber Security- (ISSSC-2020), 16-17 Dec,2020, GIET University, Gunupur, India. 10.1109/iSSSC50941.2020.9358852
A. Pattnaik, B. Rout, A.K. Patra, Comparative Study of System Performances Using Integral Type LQR with DE and ZN Optimized PID Controller in AVR Systems, "Advances in Electrical Control and Signal Systems", Springer, pp. 349-359, 2020, 10.1007/978-981-15-5262-5_25, July 2020
A. Mohanty, B. Rout, "Modified P & O MPPT and Voltage control Inverter based Island solar PV with power quality analysis under the varying load and weather conditions", IEEE conference onInternational Symposium on Sustainable Energy, Signal Processing & Cyber Security- (ISSSC-2020), 16-17 Dec,2020, GIET University, Gunupur, India. 10.1109/iSSSC50941.2020.9358852
A. Pattnaik, B. Rout, A.K. Patra, Comparative Study of System Performances Using Integral Type LQR with DE and ZN Optimized PID Controller in AVR Systems, "Advances in Electrical Control and Signal Systems", Springer, pp. 349-359, 2020, 10.1007/978-981-15-5262-5_25, July 2020
A. Pattnaik, B. Rout, A.K. Patra, Comparative Study of System Performances Using Integral Type LQR with DE and ZN Optimized PID Controller in AVR Systems, "Advances in Electrical Control and Signal Systems", Springer, pp. 349-359, 2020, 10.1007/978-981-15-5262-5_25, July 2020
A. Pattnaik, B. Rout, A.K. Patra, Comparative Study of System Performances Using Integral Type LQR with DE and ZN Optimized PID Controller in AVR Systems, "Advances in Electrical Control and Signal Systems", Springer, pp. 349-359, 2020, 10.1007/978-981-15-5262-5_25, July 2020
A. Pattnaik, B. Rout, A.K. Patra, Comparative Study of System Performances Using Integral Type LQR with DE and ZN Optimized PID Controller in AVR Systems, "Advances in Electrical Control and Signal Systems", Springer, pp. 349-359, 2020, 10.1007/978-981-15-5262-5_25, July 2020
A. Pattnaik, B. Rout, A.K. Patra, Comparative Study of System Performances Using Integral Type LQR with DE and ZN Optimized PID Controller in AVR Systems, "Advances in Electrical Control and Signal Systems", Springer, pp. 349-359, 2020, 10.1007/978-981-15-5262-5_25, July 2020
A. Pattnaik, B. Rout, A.K. Patra, Comparative Study of System Performances Using Integral Type LQR with DE and ZN Optimized PID Controller in AVR Systems, "Advances in Electrical Control and Signal Systems", Springer, pp. 349-359, 2020, 10.1007/978-981-15-5262-5_25, July 2020
Jaypuria, S., Mahapatra, T.R., Tripathy, S., Nakhale, S., Gupta, S.K. (2020) Fuzzy C-means Clustering-Based ANFIS Regression Modeling of Hybrid Laser-TIG Fabrication, Lecture Notes in Mechanical Engineering, 2020, https://doi.org/10.1007/978-981-15-1307-7_70, pp. 617-624 (IF: 0.19, SCOPUS).
S Jaypuria, TR Mahapatra, S Sahoo, O Jaypuria, (2020) Effect of arc length trim and adaptive pulsed-MIG process parameters on bead profile of stainless steel with synergic power source, Materials Today: Proceedings, 26(2), 787-795, doi: 10.1016/j.matpr.2020.01.027. (IF: 2.59, SCOPUS)
S Sahoo, TR Mahapatra, N Priyadarshini, S Mahapatra, S Naik, (2020) Influence of water binder ratio on strength and acid resistance of concrete made up of mineral admixture as supplementary cementitious material, Materials Today: Proceedings, 26(2), 796-803, doi: 10.1016/j.matpr.2020.01.028. (IF: 2.59, SCOPUS)
S Agarwal, B Dash, P Saini, N Sharma, TR Mahapatra, SK Panda, (2020) Vibroacoustic analysis of un-baffled layered composite plate under thermal environment, Materials Today: Proceedings, 24(2), 1020-1028, doi: 10.1016/j.matpr.2020.04.415. (IF: 2.59, SCOPUS)
B Dansana, TR Mahapatra, P Sahu, SK Sahu, (2020) Tribological and electrochemical corrosion performance analysis of Hastelloy C276 under different loading conditions, Materials Today: Proceedings, 24, 1434-1441, doi: 10.1016/j.matpr.2020.04.462. (IF: 2.59, SCOPUS)
Sharma, N., Mahapatra, T. R., Panda, S. K. and Katariya, P. V., (2020) Thermo-acoustic analysis of higher-order shear deformable laminated composite sandwich flat panel, Journal of Sandwich Structures & Materials, 22(5), pp. 1357-1385 DOI: 10.1177/1099636218784846 (IF: 3.9). SCI
Patnaik, P. K., Mishra, S. K., Swain, P. T. R., & Panda, D., â€œEffect of Groundnut Shell Particulate Content on Physical and Mechanical Behavior of Juteâ€“Epoxy Hybrid Compositeâ€, Journal of The Institution of Engineers (India): Series E, pp. 1-8, 2020, doi: 10.1007/s40034-020-00185-y
Patnaik, P. K., Swain, P. T. R., Purohit, A., & Biswas, S., â€œTribological study on slurry abrasive wear behavior of nonwoven viscose fabric composites with doe approachâ€, Surface Review and Letters, vol. 27, no. 08, pp. 1950185, 2020, doi: https://doi.org/10.1142/S0218625X19501853
Patnaik, P. K., Mishra, S. K., & Swain, P. T. R., â€œErosion wear behavior of needle-punched nonwoven fabric (NPNF) reinforced epoxy compositesâ€“An evaluation using Taguchiâ€™s designâ€, Materials Today: Proceedings, vol. 33, pp. 5683-5686, 2020, doi: https://doi.org/10.1016/j.matpr.2020.04.208
Patnaik, P. K., Swain, P. T. R., Mishra, S. K., Purohit, A., & Biswas, S., â€œComposite material selection for structural applications based on AHP-MOORA approachâ€, Materials Today: Proceedings, vol. 33, pp. 5659-5663, 2020, doi: https://doi.org/10.1016/j.matpr.2020.04.063
Purohit, A., Satapathy, A., Swain, P. T. R., & Patnaik, P. K., â€œAnalysis of sliding wear behavior of LD sludge filled epoxy composites using response surface methodologyâ€, Materials Today: Proceedings, vol. 33, pp. 5066-5069, 2020, doi: https://doi.org/10.1016/j.matpr.2020.02.845
Purohit, A., Swain, P. T. R., & Patnaik, P. K., â€œMechanical and sliding wear characterization of LD sludge filled hybrid compositesâ€, Materials today: proceedings, vol. 26, pp. 1654-1659, 2020, doi: https://doi.org/10.1016/j.matpr.2020.02.345
Purohit, A., Satapathy, A., & Swain, P. T. R., â€œAnalysis of Erosion Wear Behavior of LD Sludge Filled Polypropylene Composites Using RSMâ€, Materials Science Forum, vol. 978, pp. 222-228, 2020, doi: https://doi.org/10.4028/www.scientific.net/MSF.978.222
Swain, P. T. R., Das, S. N., Patnaik, P. K., & Purohit, A., â€œThe influence of moisture absorption on the mechanical and thermal properties of chemically treated DPL reinforced hybrid compositeâ€, Materials Science Forum, vol. 978, pp. 316-322, 2020, doi: https://doi.org/10.4028/www.scientific.net/MSF.978.316
Patnaik, P. K., Swain, P. T. R., Mishra, S. K., Purohit, A., & Biswas, S., â€œRecent developments on characterization of needle-punched nonwoven fabric reinforced polymer compositesâ€“A reviewâ€, Materials Today: Proceedings, vol. 26, pp. 466-470, 2020, doi: https://doi.org/10.1016/j.matpr.2019.12.086
Amit Kumar. Roy, Gyan Ranjan Biswal, and Prasenjit Basak, “An integrated rule-based power management and dynamic feed-forward low voltage ride through scheme for a grid-connected hybrid energy system”, J. Renewable Sustainable Energy, AIP, Vol. 12, pp. 01 – 18, Sep. 2020. doi: 10.1063/5.0019254 (IF: 2.847)
Gyan Ranjan Biswal, P. Mohanty, K. J. Akram, N. P. Padhy, and T. Islam, “Design and Fabrication of an Inexpensive Capacitive Humidity Sensor for Smart Sub-station Automation,” IEEE Sensors Journal, Vol. 20, No. 12, pp. 6215 – 6223, Jun. 2020. DOI: 10.1109/JSEN.2020.2974522 (IF: 4.325) {A Featured Article}
Padhi, P. K., Bidya Singh. â€œBridging the Self and its Identity Through the Works of Vikram Sethâ€ in International Journal of Psychosocial Rehabilitation, Vol. 24, Issue 03, 2020 (SCOPUS indexed), ISSN:1475-7192, Page no.- 1978-82.
Padhi, P. K. â€œLife Skills Through Englishâ€ in UGC CARE Listed Journal Our Heritage, Volume-68, Issue-30, February 2020, ISSN: o474-9030, Page no.- 6838.
Padhi, P. K. â€œAn Empirical Study of Robert Frostâ€™s Stopping by Woods on a Snowy Eveningâ€ in UGC CARE Listed Journal Our Heritage, Volume-68, Issue-1, January 2020, ISSN: o474-9030, Page no. 10575.
Padhi, P. K., Avisek Pattnaik. â€œA Journey of Africa through the Heart of Darkness by Joseph Conrad as an Outsider and Things Fall Apart by Chinua Achebe as an Insiderâ€ in Journal of Critical Reviews, Volume-7, Issue-2, 2020, ISSN: 2394-5125, (SCOPUS indexed), Page no. 167.
Selective detection of fluoride and hydrogen sulfate anions by pyrimidine-based fluorescence chemosensor. Soumya R Thakur, R Behura, S Behera, R. B. Sayala, A. K Barick, Ramakrishna D S and B. R Jali*, Indian Journal of Chemistry 59A (2020) 1809.
Ultrasonic velocity and allied acoustical parameters of 2, 4-dinitrophenyl hydrazine based Schiff base in DMSO. R. Behura, S. Behera, B. B. Palai, S. Mishra, M. Mishra, S. Behera, G. Nath and B. R. Jali*, Indian Journal of Chemistry 59A (2020) 1108.
Spectroscopic, cytotoxicity and molecular docking studies on the interaction between 2,4-dinitrophenylhydrazine derived Schiff bases with bovine serum albumin. S. Behera, R. Behura, M. Mohanty, R. Dinda, P. Mohanty, Anil K. Verma, Suban K. Sahoo and B.R. Jali*, Sensors International 1 (2020) 100048.
Laser micro drilling of 316L stainless steel orthopedic implant: A study
Modeling and optimization of rolling process: A multi-objective approach
WEDM microdrilling of 316 L stainless steel orthopedic implant
Reviewer acknowledgments and awards: Recognition awards for distinction of reviewing in 2019
An approach for design optimization of 3R manipulator using Adaptive Cuckoo Search algorithm
Particle Swarm Optimization and Machinability Aspects during Turning of Hardened D3 Steel
A. Barik, S. Rout and P. Patro, Evolution of designs for constructal cooling of a square plate using water, ionic liquid (ILs) and nano-enhanced ionic liquids (NEILs), ASME Journal of Thermal Science and Engineering Applications, 12, 021020 1-10 (2020).
P. Patro and S. Garnayak, Heat transfer enhancement from a heated plate with convex dimples by forced convection along with a cross flow jet impingement, International Journal of Applied Mechanics and Engineering, 25 (1), 127-141 (2020).
Upadhyaya, S., Nanda, B. and Panigrahi, R., 2020, Effect of granite dust as partial replacement to natural sand on strength and ductility of reinforced concrete beams, Journal of Institute of Engineers (India): Series A, Springer, Scopus
Design and analysis of the 2DOF-PIDN-FOID controller for frequency regulation of the electric power systems
Nivedita Patel, Krushna Prasad Shadangi, Thermochemical conversion of waste engine oil (WEO) to gasoline-rich crude oil, Journal of Material Cycles and Waste Management 22, (2020) 536–546.
N. Patel &K. P. Shadangi,Characterization of waste engine oil (WEO) pyrolytic oil and diesel blended oil: Fuel properties and compositional analysis, Materials Today: Proceedings 33 (2020) 4933-4936.
N. Patel &K. P. Shadangi,Thermochemical conversion of waste engine oil (WEO) to gasoline-rich crude oil, Journal of Material Cycles and Waste Management 22 (2) (2020) 536-546.
Gourav Chatterjee, Krushna Prasad Shadangi, Kaustubha Mohanty. Effect of Catalyst Bed Height on the Yield and Composition of Non-edible Seed Pyrolytic Oil. Waste and Biomass Valorization 11, (2020) 4507–4519.
R. L. Sahu, R. R. Dash, and P. K. Pradhan, â€˜Use of soil conservation service curve number and filtration coefficient approach for simulating Escherichia coli removal during river bank filtrationâ€™, J. Water Proc.engineering, vol. 37, p. 101432, Oct. 2020. https://doi.org/10.1016/j.jwpe.2020.101432
Free vibration characteristics of laminated composite stiffened plates: Experimental and numerical investigation
Analysis of Electro-MHD of third grade fluid flow through porous channel (S padhi& I Nayak) J- European J of pure and applied mathematics, Vol.13(5), pg.-1270-1284, ISSN No.-1307-5543(2020)
M. Swain, S.Kisan, “Hybridized Machine Learning based Fractal Analysis Techniques for Breast Cancer Classification”. International Journal of Advanced Computer Science and Applications, 2020, ISSN: 2156-5570. DOI : 10.14569/issn.2156-5570 , Vol. 11, No. 10,pp-179-184
S. Kisan, B. Sahu, A. Jena, S. N. Mohanty, “Detection of Violence in Videos using Hybrid Machine Learning Techniques”, International Journal of Advanced Science and Technology (IJAST), 29(3), 5386- 5392, 2020
S. Kisan, S. Nayak, A. Chawda, S.N. Mishra. “Face Shape Classification based on Modified Relative Improved Differential Box Count Method”. International Journal of Advanced Science and Technology, (IJAST), 2020, Volume 29, Issue 3, ISSN: 2005-4238, ISSN: 2207-6360 (Online),Page:3878-3889
"A Novel Energy-efficient Sensor Cloud Model using Data Prediction and Forecasting Techniques", Kalyan Das, Satyabrata Das &Aurobindo Mohapatra, Karbala International Journal of Modern Science(Scopus). Vol. 6 Issue 3 Article 5, https://kijoms.uokerbala.edu.iq/home/vol6/iss3/5
"Energy Competent Hierarchical Routing Protocol for detecting and minimizing holes in wireless sensor networks", Chinmaya Ku. Nayak & Satyabrata Das, Journal of the ACM (Journal of the Association for Computing Machinery)(Scopus).Vol.xxxSlno.xxx 2020(Accepted)
"Data Prediction and Forecasting Techniques Based Energy Efficient Cloud-integrated Sensor Network", Kalyan Das & Satyabrata Das, Science & Technology Asia(Scopus) Vol. 25 No 4 Article 7 2020,https://ph02.tci-thaijo.org/index.php/SciTechAsia
"An Adaptive Secure and Efficient Routing Protocol for Mobile Ad Hoc Networks", Bata Krishna Tripathy, Swagat Kumar Jena, Padma Lochan Bera & Satyabrata Das, Wireless Personal Communications,(SCI), DOI: https://doi.org/10.1007/s11277-020-07423-x
"Energy efficient sensor series with irregular communication interval in wireless sensor networks to minimize holes", Chinmaya Kumar Nayak & Satyabrata Das, International Journal of Advanced Science and Technology, (Scopus) Vol. 29 ,No. 4s,PP.1962-1967(2020),(Scopus), http://sersc.org/journals/index.php/IJAST/article/view/7014
"Distribution of sensor nodes for detection of energy holes using local sensor distribution algorithm in wireless sensor networks", Chinmaya Kumar Nayak & Satyabrata Das, Test Engineering and Management,(Scopus) Vol. 82(Jan/Feb 2020): 6177-6182 (Scopus), http://testmagzine.biz/index.php/testmagzine/article/view/1813
Das, Akankshya; Agrawal, Sanjay; Samantaray, Leena; Panda, Rutuparna; Abraham, Ajith; , State-of-the Art Optimal Multilevel Thresholding Methods for Brain MR Image Analysis, Revue d'Intelligence Artificielle, Volume 34.0, Number 3, Pages 243-256
Mishro, Pranaba K; Agrawal, Sanjay; Panda, Rutuparna; , A Nonlocal Spatial Coherent Fuzzy C-Means Clustering for Bias Field Correction in Brain MR Images, International Conference on Computer Vision and Image Processing, Pages 270-281, Springer Singapore Singapore
Kumar, Sa Bijay; Panda, Rutuparna; Agrawal, Sanjay; , Brain magnetic resonance image tumor detection and segmentation using edgeless active contour, 2020 11th international conference on computing, communication and networking technologies (ICCCNT), Pages 1-7, IEEE
Mishro, Pranaba K; Agrawal, Sanjay; Panda, Rutuparna; Hansdah, Ku Tapaswini; , MR image enhancement using stationary wavelet transform based approach, 2020 11th International Conference on Computing, Communication and Networking Technologies (ICCCNT), Pages 1-6, IEEE
Mishra, Premananda; Agrawal, Sanjay; Panda, Rutuparna; , Epileptic EEG signal classification using exponential energy and SVM, 2020 International Conference on Electrical and Electronics Engineering (ICE3), Pages 231-235, IEEE
Meher, Bikash; Agrawal, S;A multimodality medical image fusion method using region based approach, ICDSMLA 2019: Proceedings of the 1st International Conference on Data Science, Machine Learning and Applications, Pages 1156-1162, Springer Singapore Singapore
Meher, Bikash; Agrawal, Sanjay; Panda, Rutuparna; Dora, Lingraj; Abraham, Ajith; , A novel region based multimodal image fusion technique using improved dictionary learning, International Journal of Imaging Systems and Technology, Volume 30.0, Number 3, Pages 558-576, John Wiley & Sons, Inc. Hoboken, USA
Agrawal, Sanjay; Samantaray, Leena; Panda, Rutuparna; Dora, Lingraj; A new hybrid adaptive cuckoo search-squirrel search algorithm for brain MR image analysis, Hybrid Machine Intelligence for Medical Image Analysis, Pages 85-117, Springer Singapore
Mishro, Pranaba K; Agrawal, Sanjay; Sharma, Shipra; , A Textural Feature Based Cytological Image Classification Using Artificial Neural Network, Machine Learning and Metaheuristics Algorithms, and Applications: First Symposium, SoMMA 2019, Trivandrum, India, December 18â€“21, 2019, Revised Selected Papers 1, Pages 208-217, Springer Singapore
Mishro, Pranaba K; Agrawal, Sanjay; Panda, Rutuparna; Abraham, Ajith; A novel type-2 fuzzy C-means clustering for brain MR image segmentation, IEEE transactions on Cybernetics, Volume 51.0, Number 8, Pages 3901-3912, IEEE
Mishro, Pranaba K; Agrawal, Sanjay; Panda, Rutuparna; Abraham, Ajith; , Novel fuzzy clustering based bias field correction technique for brain magnetic resonance images, IET Image Processing, Volume 14.0, Number 9, Pages 1929-1936, The Institution of Engineering and Technology
Agrawal, Sanjay; Panda, Rutuparna; Samantaray, Leena; Abraham, Ajith; , A novel automated absolute intensity difference based technique for optimal MR brain image thresholding, Journal of King Saud University-Computer and Information Sciences, Volume 32.0, Number 9, Pages 1045-1054, Elsevier
Dash, P. B., Nayak, J., Naik, B., Oram, E., & Islam, S. H. (2020). Model based iot security framework using multiclass adaptive boosting with smote. Security and Privacy, 3(5), e112.
K. K. Sahu, S. C. Nayak, and H. S. Behera, â€œForecasting Currency Exchange Rate Time Series With Fireworks Algorithm-Based Higher Order Neural Network, With Special Attention To Training Data Enrichment,â€ Computer Science, vol. 21, no. 4, pp. 463â€“489, 2020, doi: 10.7494/csci.2020.21.4.3474
Jali, B. R.; Thakur, S. R.; Behura, R.; Behera, S.; Sayala, R. B.; Barick, A. K.; Ramakrishna D.S. Selective Detection of Fluoride and Hydrogen Sulfate Anions by Pyrimidine-Based Fluorescence Chemosensor. Indian Journal of Chemistry -Section A, 2020, 59. https://doi.org/10.56042/ijca.v59i12.29642. (SCI & SCOPUS)
B. Parhi, D. Bharatia and S K Swain* â€œSurfactant Free Green Synthesis of GOSiMa Hybrid Nanocomposite for Charge Storage Applicationâ€ Ceramic International, (Elsevier), 46(17), December 01, 2020, 27184-192 (2020) (Impact Factor: 3.830) ISSN 0272-8842. DOI: https://doi.org/10.1016/j.ceramint.2020.07.199
N. Sarkar, G. Sahoo and S K Swain* â€œGraphene quantum dot decorated magnetic graphene oxide filled polyvinyl alcohol hybrid hydrogel for removal of dye pollutantsâ€ Journal of Molecular Liquids(Elsevier) 302, 15 March 2020, 112591-112608 (Impact Factor: 5.065), (2020). 10.1016/j.molliq.2020.112591. ISSN: 0167-7322.
K Prusty and S K Swain* â€œPolypropylene oxide/polyethylene oxide-cellulose hybrid nanocomposite hydrogels as drug delivery vehicleâ€ Journal of Applied Polymer Science (Wiley) (2020), (Impact Factor: 2.52) (Accepted) ISSN: 1097-4628. DOI: 10.1002/app.20200978
A. Biwal, P. Sethy and S K Swain* â€œChange in Orientation of Polyacrylic acid and Chitosan Networks by Imprintment of Gold Nanoparticlesâ€ Polymer-Plastic Technology and Materials, (Tylor & Francis), (2020) (Impact Factor: 1.973). ISSN: 03602559 DOI:10.1080/25740881.2020.1793196.
N. Sarkar, G. Sahoo and S K Swain* â€œNanoclay sandwiched reduced graphene oxide filled macroporus polyacrylamide-agar hybrid hydrogel as an adsorbent for dye decontaminationâ€ Nano-Structures & Nano-Objects (Elsevier), 23, 100507-100523 (2020) (Impact Factor:1.113) ISSN: 2352-507X. DOI: https://doi.org/10.1016/j.nanoso.2020.100507
N. Sarkar, G. Sahoo and S K Swain* â€œReduced graphene oxide decorated superporous polyacrylamide based interpenetrating network hydrogel as dye adsorbentâ€ Materials Chemistry and Physics (Elsevier) (Impact Factor: 3.408), 250, August 01, 123022-123037 (2020). doi.org/10.1016/j.matchemphys.2020.123022. ISSN: 0254-0584.
K Prusty and S K Swain* â€œNano ZrO2 reinforced cellulose incorporated polyethylmethacrylate/polyvinyl alcohol composite films as semiconducting packaging materialsâ€ Journal of Applied Polymer Science (Wiley) 137(42), (2020), 49284 (Impact Factor: 2.52) https://doi.org/10.1002/app.49284. ISSN: 1097-4628.
P. K Sethi, K. Prusty, P Mohapatra and S K Swain* â€œNano CaCO3 embodied poly acrylic acid/dextran nanocomposites for packaging applicationsâ€ Journal of Applied Polymer Science (Wiley), 137 (3), January 15, 2020, 48298-308 (2020). DOI: 10.1002/app.48298 (Impact Factor: 2.52). ISSN: 1097-4628.
B. Parhi, D. Bharatiya and S K Swain* â€œApplication of Quercetin Flavonoid Based Hybrid Nanocomposites: A Reviewâ€ Saudi Pharmaceutical Journal (Elsevier) (Impact Factor: 2.879), 00, 00-00 (2020) Early View. doi.org/10.1016/j.jsps.2020.10.017. ISSN: 1319-0164.
K. Prusty, S. Patra and S K Swain* â€œNano ZnO imprinted dextran hybrid poly (N-isopropylacrylamide)/poly ethylene glycol composite hydrogels for in vitro release of ciprofloxacinâ€ Materials Today Communication (Elsevier) (Impact Factor: 2.678), 00, 00-00 Available online 11 November 2020, 101869 (2020). doi.org/10.1016/j.mtcomm.2020.101869.
D. Sahu, N. Sarkar, P Mohapatra and S K Swain* â€œRhodamine B associated Ag/r-GO nanocomposites as ultrasensitive fluorescent sensor for Hg2+â€ Microchemical Journal, (Elsevier) (Impact Factor: 3.206) 154, 104577 (2020) doi.org/10.1016/j.microc.2019.104577.
D. Sahu, P Mohapatra and S K Swain* â€œHighly orange fluorescence emission by water soluble gold nanoclusters for â€œturn offâ€ sensing of Hg2+ ionâ€ Journal of Photochemistry & Photobiology, A: Chemistry (Elsevier) (Impact Factor: 3.261), 386, 112098 (2020). DOI: 10.1016/j.jphotochem.2019.112098.
S. Behera, “A Case Study on Safe Operating Protocol in Two Different Topologies of a Grid-tied PV Plant,” Alternative Energy and Distributed Generation Journal, vol. 1, no. 3—2020, pp.22-29 ISSN: 2643-6981
S. Behera, I. Pattnaik and A. Meher, “MPP Tracking of Grid-Integrated PV System Under Partial Shading Using MSCA,” Journal of The Institution of Engineers (India): Series B. vol. 101, no. 4, pp. 389-395, 2020, (Scopus/UGCCare) DOI: https://doi.org/10.1007/s40031-020-00465-6 ISSN: 2250-2114
S. Behera, S. Behera, A.K Barisal and P. Sahu, “Dynamic economic emission dispatch of thermal-wind-solar system with constriction factor-based particle swarm optimization algorithm,” World Journal of Engineering, Vol. 18 No. 2, pp. 217-227, 2020. (ESCI/Scopus) DOI: https://doi.org/10.1108/WJE-07-2020-0327 ISSN: 1708-5284
S. Gadtia, S.K. Padhan and B. Bhoi, Square root formulae in the ?ulbas?tras and Bakhshãl? manuscript, Journal of Interdisciplinary Mathematics, 20 , (2020) 1-10.
Narasingh Deep, Punyapriya Mishra, Layatitdev Das, “Application of adaptive neuro-fuzzy inference system (ANFIS) for predicting dielectric characteristics of CNT/PMMA nanocomposites.” Materials Today: Proceedings, 33, 5200-5205
Madhusmita Panda, BikramadityaDas, and B.B.Pati, (2020) “Global path planning for multiple AUVs using GWO”. Archivesof Control Sciences, (Poland)30(1), pp. 77–100.
BikramadityaDas, Bidyadhar Subudhi and B.B.Pati, (2020)“Formation control of underwater vehicles using multiagent system”. Archives of Control Sciences, (Poland) 30.No.2, pp.365-384, DOI-10.24425/acs.2020.133503
Rosy Pradhan, S K Majhi, J K Pradhan, B B Pati,(2020) "Optimal fractional order PID controller design using Ant Lion Optimizer", Ain Shams Engineering Journal,June 2020, Elsevier Publication,Vol.11, No.2, pp.281-291, DOI: https://doi.org/10.1016/j.asej.2019.10.005
Panda, A., Das, S. R., & Dhupal, D. (2019). Machinability investigation of HSLA steel in hard turning with coated ceramic tool: Assessment, modeling, optimization, and economic aspects. Journal of Advanced Manufacturing Systems, 18(4), 625–655.
Das, A., Pradhan, O., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). Performance appraisal of various nanofluids during hard machining of AISI 4340 steel. Journal of Manufacturing Processes, 46, 248–270.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryogenically treated cermet inserts. Journal of Superhard Materials, 41(4), 247–264.
Dixit, S. R., Das, S. R., & Dhupal, D. (2019). Parametric optimization of Nd:YAG laser microgrooving on aluminum oxide using integrated RSM–ANN–GA approach. Journal of Industrial Engineering International, 15(2), 333–349.
Das, A., Tirkey, N., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). A comparison of machinability in hard turning of EN-24 alloy steel under mist cooled and dry cutting environments with a coated cermet tool. Journal of Failure Analysis and Prevention, 19(1), 115–130.
Das, A., Patel, S. K., & Das, S. R. (2019). Performance comparison of vegetable oil-based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication. Mechanics & Industry, 20(5), 506.
Anand, A., Behera, A. K., & Das, S. R. (2019). An overview on economic machining of hardened steels by hard turning and its process variables. Manufacturing Review, 6, 4.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. International Journal of Engineering Science and Technology.
Panda, A., Das, S. R., & Dhupal, D. (2019). Machinability investigation of HSLA steel in hard turning with coated ceramic tool: Assessment, modeling, optimization, and economic aspects. Journal of Advanced Manufacturing Systems, 18(4), 625–655.
Das, A., Pradhan, O., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). Performance appraisal of various nanofluids during hard machining of AISI 4340 steel. Journal of Manufacturing Processes, 46, 248–270.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryogenically treated cermet inserts. Journal of Superhard Materials, 41(4), 247–264.
Dixit, S. R., Das, S. R., & Dhupal, D. (2019). Parametric optimization of Nd:YAG laser microgrooving on aluminum oxide using integrated RSM–ANN–GA approach. Journal of Industrial Engineering International, 15(2), 333–349.
Das, A., Tirkey, N., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). A comparison of machinability in hard turning of EN-24 alloy steel under mist cooled and dry cutting environments with a coated cermet tool. Journal of Failure Analysis and Prevention, 19(1), 115–130.
Das, A., Patel, S. K., & Das, S. R. (2019). Performance comparison of vegetable oil-based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication. Mechanics & Industry, 20(5), 506.
Anand, A., Behera, A. K., & Das, S. R. (2019). An overview on economic machining of hardened steels by hard turning and its process variables. Manufacturing Review, 6, 4.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. International Journal of Engineering Science and Technology.
Panda, A., Das, S. R., & Dhupal, D. (2019). Machinability investigation of HSLA steel in hard turning with coated ceramic tool: Assessment, modeling, optimization, and economic aspects. Journal of Advanced Manufacturing Systems, 18(4), 625–655.
Das, A., Pradhan, O., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). Performance appraisal of various nanofluids during hard machining of AISI 4340 steel. Journal of Manufacturing Processes, 46, 248–270.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryogenically treated cermet inserts. Journal of Superhard Materials, 41(4), 247–264.
Dixit, S. R., Das, S. R., & Dhupal, D. (2019). Parametric optimization of Nd:YAG laser microgrooving on aluminum oxide using integrated RSM–ANN–GA approach. Journal of Industrial Engineering International, 15(2), 333–349.
Das, A., Tirkey, N., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). A comparison of machinability in hard turning of EN-24 alloy steel under mist cooled and dry cutting environments with a coated cermet tool. Journal of Failure Analysis and Prevention, 19(1), 115–130.
Das, A., Patel, S. K., & Das, S. R. (2019). Performance comparison of vegetable oil-based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication. Mechanics & Industry, 20(5), 506.
Anand, A., Behera, A. K., & Das, S. R. (2019). An overview on economic machining of hardened steels by hard turning and its process variables. Manufacturing Review, 6, 4.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. International Journal of Engineering Science and Technology.
Panda, A., Das, S. R., & Dhupal, D. (2019). Machinability investigation of HSLA steel in hard turning with coated ceramic tool: Assessment, modeling, optimization, and economic aspects. Journal of Advanced Manufacturing Systems, 18(4), 625–655.
Das, A., Pradhan, O., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). Performance appraisal of various nanofluids during hard machining of AISI 4340 steel. Journal of Manufacturing Processes, 46, 248–270.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryogenically treated cermet inserts. Journal of Superhard Materials, 41(4), 247–264.
Dixit, S. R., Das, S. R., & Dhupal, D. (2019). Parametric optimization of Nd:YAG laser microgrooving on aluminum oxide using integrated RSM–ANN–GA approach. Journal of Industrial Engineering International, 15(2), 333–349.
Das, A., Tirkey, N., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). A comparison of machinability in hard turning of EN-24 alloy steel under mist cooled and dry cutting environments with a coated cermet tool. Journal of Failure Analysis and Prevention, 19(1), 115–130.
Das, A., Patel, S. K., & Das, S. R. (2019). Performance comparison of vegetable oil-based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication. Mechanics & Industry, 20(5), 506.
Anand, A., Behera, A. K., & Das, S. R. (2019). An overview on economic machining of hardened steels by hard turning and its process variables. Manufacturing Review, 6, 4.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. International Journal of Engineering Science and Technology.
Panda, A., Das, S. R., & Dhupal, D. (2019). Machinability investigation of HSLA steel in hard turning with coated ceramic tool: Assessment, modeling, optimization, and economic aspects. Journal of Advanced Manufacturing Systems, 18(4), 625–655.
Das, A., Pradhan, O., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). Performance appraisal of various nanofluids during hard machining of AISI 4340 steel. Journal of Manufacturing Processes, 46, 248–270.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryogenically treated cermet inserts. Journal of Superhard Materials, 41(4), 247–264.
Dixit, S. R., Das, S. R., & Dhupal, D. (2019). Parametric optimization of Nd:YAG laser microgrooving on aluminum oxide using integrated RSM–ANN–GA approach. Journal of Industrial Engineering International, 15(2), 333–349.
Das, A., Tirkey, N., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). A comparison of machinability in hard turning of EN-24 alloy steel under mist cooled and dry cutting environments with a coated cermet tool. Journal of Failure Analysis and Prevention, 19(1), 115–130.
Das, A., Patel, S. K., & Das, S. R. (2019). Performance comparison of vegetable oil-based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication. Mechanics & Industry, 20(5), 506.
Anand, A., Behera, A. K., & Das, S. R. (2019). An overview on economic machining of hardened steels by hard turning and its process variables. Manufacturing Review, 6, 4.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. International Journal of Engineering Science and Technology.
Panda, A., Das, S. R., & Dhupal, D. (2019). Machinability investigation of HSLA steel in hard turning with coated ceramic tool: Assessment, modeling, optimization, and economic aspects. Journal of Advanced Manufacturing Systems, 18(4), 625–655.
Das, A., Pradhan, O., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). Performance appraisal of various nanofluids during hard machining of AISI 4340 steel. Journal of Manufacturing Processes, 46, 248–270.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryogenically treated cermet inserts. Journal of Superhard Materials, 41(4), 247–264.
Dixit, S. R., Das, S. R., & Dhupal, D. (2019). Parametric optimization of Nd:YAG laser microgrooving on aluminum oxide using integrated RSM–ANN–GA approach. Journal of Industrial Engineering International, 15(2), 333–349.
Das, A., Tirkey, N., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). A comparison of machinability in hard turning of EN-24 alloy steel under mist cooled and dry cutting environments with a coated cermet tool. Journal of Failure Analysis and Prevention, 19(1), 115–130.
Das, A., Patel, S. K., & Das, S. R. (2019). Performance comparison of vegetable oil-based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication. Mechanics & Industry, 20(5), 506.
Anand, A., Behera, A. K., & Das, S. R. (2019). An overview on economic machining of hardened steels by hard turning and its process variables. Manufacturing Review, 6, 4.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. International Journal of Engineering Science and Technology.
Panda, A., Das, S. R., & Dhupal, D. (2019). Machinability investigation of HSLA steel in hard turning with coated ceramic tool: Assessment, modeling, optimization, and economic aspects. Journal of Advanced Manufacturing Systems, 18(4), 625–655.
Das, A., Pradhan, O., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). Performance appraisal of various nanofluids during hard machining of AISI 4340 steel. Journal of Manufacturing Processes, 46, 248–270.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryogenically treated cermet inserts. Journal of Superhard Materials, 41(4), 247–264.
Dixit, S. R., Das, S. R., & Dhupal, D. (2019). Parametric optimization of Nd:YAG laser microgrooving on aluminum oxide using integrated RSM–ANN–GA approach. Journal of Industrial Engineering International, 15(2), 333–349.
Das, A., Tirkey, N., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). A comparison of machinability in hard turning of EN-24 alloy steel under mist cooled and dry cutting environments with a coated cermet tool. Journal of Failure Analysis and Prevention, 19(1), 115–130.
Das, A., Patel, S. K., & Das, S. R. (2019). Performance comparison of vegetable oil-based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication. Mechanics & Industry, 20(5), 506.
Anand, A., Behera, A. K., & Das, S. R. (2019). An overview on economic machining of hardened steels by hard turning and its process variables. Manufacturing Review, 6, 4.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. International Journal of Engineering Science and Technology.
Panda, A., Das, S. R., & Dhupal, D. (2019). Machinability investigation of HSLA steel in hard turning with coated ceramic tool: Assessment, modeling, optimization, and economic aspects. Journal of Advanced Manufacturing Systems, 18(4), 625–655.
Das, A., Pradhan, O., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). Performance appraisal of various nanofluids during hard machining of AISI 4340 steel. Journal of Manufacturing Processes, 46, 248–270.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryogenically treated cermet inserts. Journal of Superhard Materials, 41(4), 247–264.
Dixit, S. R., Das, S. R., & Dhupal, D. (2019). Parametric optimization of Nd:YAG laser microgrooving on aluminum oxide using integrated RSM–ANN–GA approach. Journal of Industrial Engineering International, 15(2), 333–349.
Das, A., Tirkey, N., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). A comparison of machinability in hard turning of EN-24 alloy steel under mist cooled and dry cutting environments with a coated cermet tool. Journal of Failure Analysis and Prevention, 19(1), 115–130.
Das, A., Patel, S. K., & Das, S. R. (2019). Performance comparison of vegetable oil-based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication. Mechanics & Industry, 20(5), 506.
Anand, A., Behera, A. K., & Das, S. R. (2019). An overview on economic machining of hardened steels by hard turning and its process variables. Manufacturing Review, 6, 4.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. International Journal of Engineering Science and Technology.
Panda, A., Das, S. R., & Dhupal, D. (2019). Machinability investigation of HSLA steel in hard turning with coated ceramic tool: Assessment, modeling, optimization, and economic aspects. Journal of Advanced Manufacturing Systems, 18(4), 625–655.
Das, A., Pradhan, O., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). Performance appraisal of various nanofluids during hard machining of AISI 4340 steel. Journal of Manufacturing Processes, 46, 248–270.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryogenically treated cermet inserts. Journal of Superhard Materials, 41(4), 247–264.
Dixit, S. R., Das, S. R., & Dhupal, D. (2019). Parametric optimization of Nd:YAG laser microgrooving on aluminum oxide using integrated RSM–ANN–GA approach. Journal of Industrial Engineering International, 15(2), 333–349.
Das, A., Tirkey, N., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). A comparison of machinability in hard turning of EN-24 alloy steel under mist cooled and dry cutting environments with a coated cermet tool. Journal of Failure Analysis and Prevention, 19(1), 115–130.
Das, A., Patel, S. K., & Das, S. R. (2019). Performance comparison of vegetable oil-based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication. Mechanics & Industry, 20(5), 506.
Anand, A., Behera, A. K., & Das, S. R. (2019). An overview on economic machining of hardened steels by hard turning and its process variables. Manufacturing Review, 6, 4.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. International Journal of Engineering Science and Technology.
Panda, A., Das, S. R., & Dhupal, D. (2019). Machinability investigation of HSLA steel in hard turning with coated ceramic tool: Assessment, modeling, optimization, and economic aspects. Journal of Advanced Manufacturing Systems, 18(4), 625–655.
Das, A., Pradhan, O., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). Performance appraisal of various nanofluids during hard machining of AISI 4340 steel. Journal of Manufacturing Processes, 46, 248–270.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryogenically treated cermet inserts. Journal of Superhard Materials, 41(4), 247–264.
Dixit, S. R., Das, S. R., & Dhupal, D. (2019). Parametric optimization of Nd:YAG laser microgrooving on aluminum oxide using integrated RSM–ANN–GA approach. Journal of Industrial Engineering International, 15(2), 333–349.
Das, A., Tirkey, N., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). A comparison of machinability in hard turning of EN-24 alloy steel under mist cooled and dry cutting environments with a coated cermet tool. Journal of Failure Analysis and Prevention, 19(1), 115–130.
Das, A., Patel, S. K., & Das, S. R. (2019). Performance comparison of vegetable oil-based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication. Mechanics & Industry, 20(5), 506.
Anand, A., Behera, A. K., & Das, S. R. (2019). An overview on economic machining of hardened steels by hard turning and its process variables. Manufacturing Review, 6, 4.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. International Journal of Engineering Science and Technology.
Panda, A., Das, S. R., & Dhupal, D. (2019). Machinability investigation of HSLA steel in hard turning with coated ceramic tool: Assessment, modeling, optimization, and economic aspects. Journal of Advanced Manufacturing Systems, 18(4), 625–655.
Das, A., Pradhan, O., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). Performance appraisal of various nanofluids during hard machining of AISI 4340 steel. Journal of Manufacturing Processes, 46, 248–270.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryogenically treated cermet inserts. Journal of Superhard Materials, 41(4), 247–264.
Dixit, S. R., Das, S. R., & Dhupal, D. (2019). Parametric optimization of Nd:YAG laser microgrooving on aluminum oxide using integrated RSM–ANN–GA approach. Journal of Industrial Engineering International, 15(2), 333–349.
Das, A., Tirkey, N., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). A comparison of machinability in hard turning of EN-24 alloy steel under mist cooled and dry cutting environments with a coated cermet tool. Journal of Failure Analysis and Prevention, 19(1), 115–130.
Das, A., Patel, S. K., & Das, S. R. (2019). Performance comparison of vegetable oil-based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication. Mechanics & Industry, 20(5), 506.
Anand, A., Behera, A. K., & Das, S. R. (2019). An overview on economic machining of hardened steels by hard turning and its process variables. Manufacturing Review, 6, 4.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. International Journal of Engineering Science and Technology.
Panda, A., Das, S. R., & Dhupal, D. (2019). Machinability investigation of HSLA steel in hard turning with coated ceramic tool: Assessment, modeling, optimization, and economic aspects. Journal of Advanced Manufacturing Systems, 18(4), 625–655.
Das, A., Pradhan, O., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). Performance appraisal of various nanofluids during hard machining of AISI 4340 steel. Journal of Manufacturing Processes, 46, 248–270.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryogenically treated cermet inserts. Journal of Superhard Materials, 41(4), 247–264.
Dixit, S. R., Das, S. R., & Dhupal, D. (2019). Parametric optimization of Nd:YAG laser microgrooving on aluminum oxide using integrated RSM–ANN–GA approach. Journal of Industrial Engineering International, 15(2), 333–349.
Das, A., Tirkey, N., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). A comparison of machinability in hard turning of EN-24 alloy steel under mist cooled and dry cutting environments with a coated cermet tool. Journal of Failure Analysis and Prevention, 19(1), 115–130.
Das, A., Patel, S. K., & Das, S. R. (2019). Performance comparison of vegetable oil-based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication. Mechanics & Industry, 20(5), 506.
Anand, A., Behera, A. K., & Das, S. R. (2019). An overview on economic machining of hardened steels by hard turning and its process variables. Manufacturing Review, 6, 4.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. International Journal of Engineering Science and Technology.
Debasmita Pani, Punyapriya Mishra, Study of mechanical properties of natural fiber reinforced hybrid polymer composites, International journal of Advanced Mechanical Engineering, 9(1), 1-6
Punyapriya Mishra, Narasingh Deep, Sagarika Pradhan, Vikram G Kamble “Effect of functionalized MWCNT on the mechanical and dielectric properties of PMMA nano composites”, International Journal of Nano Science, 18 (6), 1850035-304
Panda, A., Das, S. R., & Dhupal, D. (2019). Machinability investigation of HSLA steel in hard turning with coated ceramic tool: Assessment, modeling, optimization, and economic aspects. Journal of Advanced Manufacturing Systems, 18(4), 625–655.
Das, A., Pradhan, O., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). Performance appraisal of various nanofluids during hard machining of AISI 4340 steel. Journal of Manufacturing Processes, 46, 248–270.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryogenically treated cermet inserts. Journal of Superhard Materials, 41(4), 247–264.
Dixit, S. R., Das, S. R., & Dhupal, D. (2019). Parametric optimization of Nd:YAG laser microgrooving on aluminum oxide using integrated RSM–ANN–GA approach. Journal of Industrial Engineering International, 15(2), 333–349.
Das, A., Tirkey, N., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). A comparison of machinability in hard turning of EN-24 alloy steel under mist cooled and dry cutting environments with a coated cermet tool. Journal of Failure Analysis and Prevention, 19(1), 115–130.
Das, A., Patel, S. K., & Das, S. R. (2019). Performance comparison of vegetable oil-based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication. Mechanics & Industry, 20(5), 506.
Anand, A., Behera, A. K., & Das, S. R. (2019). An overview on economic machining of hardened steels by hard turning and its process variables. Manufacturing Review, 6, 4.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. International Journal of Engineering Science and Technology.
Panda, A., Das, S. R., & Dhupal, D. (2019). Machinability investigation of HSLA steel in hard turning with coated ceramic tool: Assessment, modeling, optimization, and economic aspects. Journal of Advanced Manufacturing Systems, 18(4), 625–655.
Das, A., Pradhan, O., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). Performance appraisal of various nanofluids during hard machining of AISI 4340 steel. Journal of Manufacturing Processes, 46, 248–270.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryogenically treated cermet inserts. Journal of Superhard Materials, 41(4), 247–264.
Dixit, S. R., Das, S. R., & Dhupal, D. (2019). Parametric optimization of Nd:YAG laser microgrooving on aluminum oxide using integrated RSM–ANN–GA approach. Journal of Industrial Engineering International, 15(2), 333–349.
Das, A., Tirkey, N., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). A comparison of machinability in hard turning of EN-24 alloy steel under mist cooled and dry cutting environments with a coated cermet tool. Journal of Failure Analysis and Prevention, 19(1), 115–130.
Das, A., Patel, S. K., & Das, S. R. (2019). Performance comparison of vegetable oil-based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication. Mechanics & Industry, 20(5), 506.
Anand, A., Behera, A. K., & Das, S. R. (2019). An overview on economic machining of hardened steels by hard turning and its process variables. Manufacturing Review, 6, 4.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. International Journal of Engineering Science and Technology.
78. Panda, A., Das, S. R., & Dhupal, D. (2019). Machinability investigation of HSLA steel in hard turning with coated ceramic tool: Assessment, modeling, optimization, and economic aspects. Journal of Advanced Manufacturing Systems, 18(4), 625–655.
79. Das, A., Pradhan, O., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). Performance appraisal of various nanofluids during hard machining of AISI 4340 steel. Journal of Manufacturing Processes, 46, 248–270.
80. Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryogenically treated cermet inserts. Journal of Superhard Materials, 41(4), 247–264.
81. Dixit, S. R., Das, S. R., & Dhupal, D. (2019). Parametric optimization of Nd:YAG laser microgrooving on aluminum oxide using integrated RSM–ANN–GA approach. Journal of Industrial Engineering International, 15(2), 333–349.
82. Das, A., Tirkey, N., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). A comparison of machinability in hard turning of EN-24 alloy steel under mist cooled and dry cutting environments with a coated cermet tool. Journal of Failure Analysis and Prevention, 19(1), 115–130.
83. Das, A., Patel, S. K., & Das, S. R. (2019). Performance comparison of vegetable oil-based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication. Mechanics & Industry, 20(5), 506.
84. Anand, A., Behera, A. K., & Das, S. R. (2019). An overview on economic machining of hardened steels by hard turning and its process variables. Manufacturing Review, 6, 4.
85. Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Performance evaluation of aluminium oxide nanoparticles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. International Journal of Engineering Science and Technology.
D. Sahu, N. Sarkar, P. Mohapatra and S. K. Swain* “Nano gold hybrid polyvinyl alcohol films for sensing of Cu2+ ions” Chemistry Select, 4, 9784-9793, (Wiley-VCH), (2019). (Impact Factor: 2.0)ISSN:2365-6549. DOI: https://doi.org/10.1002/slct.201902167
B. B. Singh, F. Mohanty, S. S. Das*, and S. K. Swain “Graphene sandwiched crumb rubber dispersed hot mix asphalt” Journal of Traffic and Transportation Engineering, 7(5), 652-667, (Elsevier), (2019). (Impact Factor:1.54) ISSN: 2095-7564. DOI: https://doi.org/10.1016/j.jtte.2019.02.003
K. Prusty and S. K. Swain* “Release of ciprofloxacin drugs by nano gold embedded cellulose grafted polyacrylamide hybrid nanocomposite hydrogels” International Journal of Biological Macromolecules, 126(1), 665-675, (Elsevier), (2019). (Impact Factor: 8.5) ISSN:0141-8130.DOI: https://doi.org/10.1016/j.ijbiomac.2018.12.258 0141-8130
P. K. Sethy, K. Prusty, P. Mohapatra and S. K. Swain* “Nanoclay decorated polyacrylic acid-starch hybrid nanocomposite thin films as packaging materials” Polymer Composites, 40, 229–239, (Wiley), (2019). (Impact Factor: 4.7)ISSN: 1548-0569.DOI: https://doi.org/10.1002/pc.24326
D. Sahu, G. Sahoo, P. Mohapatra and S. K. Swain* “Dual activities of nano silver embedded reduced graphene oxide using clove leaf extracts: Hg2+ sensing and catalytic degradation”Chemistry Select, 4, 2593–2602, (Wiley-VCH), (2019). (Impact Factor: 2.0) ISSN: 2365-6549. DOI: https://doi.org/10.1002/slct.201803725
G. Sahoo, N. Sarkar and S. K. Swain* “Effect of layered graphene oxide on the structure and properties of bovine serum albumin grafted polyacrylonitrile hybrid bionanocomposites” Polymer Composites,40(10),3989-4003, (Wiley),(2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.25260
F. Mohanty and S. K. Swain*"Silver nanoparticles decorated polyethylmethacrylate/graphene oxide composite: as packaging material" Polymer Composites, 40, 1199–1207, (Wiley), (2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.24944
F. Mohanty and S. K. Swain* “Nano silver embedded starch hybrid graphene oxide sandwiched poly(ethylmethacrylate) for packaging application” Nano-Structures & Nano-Objects, 18, 100300, (Elsevier), (2019). (Impact Factor:5.06)ISSN: 2352-507X. DOI: https://doi.org/10.1016/j.nanoso.2019.100300
K. Prusty and S. K. Swain* “Nanostructured gold dispersed polyethylmethaacrylate/dextran hybrid composites for packaging applications” Polymer-Plastic Technology and Materials, 58 (18), 2019 – 2030, (Tylor & Francis), (2019). (Impact Factor:3.32) ISSN: 2574-089X. DOI: https://doi.org/10.1080/25740881.2019.1602140
D. Sahu, N. Sarkar, G. Sahoo, P. Mohapatra and S. K. Swain* “Nano silver imprinted graphene oxide as catalyst in reduction of 4-nitrophenol” Journal of Physical Organic Chemistry, 32(9), 3971,(Wiley), (2019). (Impact Factor: 1.8) ISSN:1099-1395. DOI: https://doi.org/10.1002/poc.3971
K. Prusty, A. Biswal, S. B. Biswal and S. K. Swain* “Synthesis of soy protein/polyacrylamide nanocomposite hydrogels for delivery of ciprofloxacin drug” Materials Chemistry and Physics, 234, 378-289, (Elsevier), (2019). (Impact Factor: 5.0) ISSN: 0254-0584. DOI: https://doi.org/10.1016/j.matchemphys.2019.05.038
D. Sahu, N. Sarkar, P. Mohapatra and S. K. Swain* “Nano gold hybrid polyvinyl alcohol films for sensing of Cu2+ ions” Chemistry Select, 4, 9784-9793, (Wiley-VCH), (2019). (Impact Factor: 2.0)ISSN:2365-6549. DOI: https://doi.org/10.1002/slct.201902167
B. B. Singh, F. Mohanty, S. S. Das*, and S. K. Swain “Graphene sandwiched crumb rubber dispersed hot mix asphalt” Journal of Traffic and Transportation Engineering, 7(5), 652-667, (Elsevier), (2019). (Impact Factor:1.54) ISSN: 2095-7564. DOI: https://doi.org/10.1016/j.jtte.2019.02.003
K. Prusty and S. K. Swain* “Release of ciprofloxacin drugs by nano gold embedded cellulose grafted polyacrylamide hybrid nanocomposite hydrogels” International Journal of Biological Macromolecules, 126(1), 665-675, (Elsevier), (2019). (Impact Factor: 8.5) ISSN:0141-8130.DOI: https://doi.org/10.1016/j.ijbiomac.2018.12.258 0141-8130
P. K. Sethy, K. Prusty, P. Mohapatra and S. K. Swain* “Nanoclay decorated polyacrylic acid-starch hybrid nanocomposite thin films as packaging materials” Polymer Composites, 40, 229–239, (Wiley), (2019). (Impact Factor: 4.7)ISSN: 1548-0569.DOI: https://doi.org/10.1002/pc.24326
D. Sahu, G. Sahoo, P. Mohapatra and S. K. Swain* “Dual activities of nano silver embedded reduced graphene oxide using clove leaf extracts: Hg2+ sensing and catalytic degradation”Chemistry Select, 4, 2593–2602, (Wiley-VCH), (2019). (Impact Factor: 2.0) ISSN: 2365-6549. DOI: https://doi.org/10.1002/slct.201803725
G. Sahoo, N. Sarkar and S. K. Swain* “Effect of layered graphene oxide on the structure and properties of bovine serum albumin grafted polyacrylonitrile hybrid bionanocomposites” Polymer Composites,40(10),3989-4003, (Wiley),(2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.25260
F. Mohanty and S. K. Swain*"Silver nanoparticles decorated polyethylmethacrylate/graphene oxide composite: as packaging material" Polymer Composites, 40, 1199–1207, (Wiley), (2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.24944
F. Mohanty and S. K. Swain* “Nano silver embedded starch hybrid graphene oxide sandwiched poly(ethylmethacrylate) for packaging application” Nano-Structures & Nano-Objects, 18, 100300, (Elsevier), (2019). (Impact Factor:5.06)ISSN: 2352-507X. DOI: https://doi.org/10.1016/j.nanoso.2019.100300
K. Prusty and S. K. Swain* “Nanostructured gold dispersed polyethylmethaacrylate/dextran hybrid composites for packaging applications” Polymer-Plastic Technology and Materials, 58 (18), 2019 – 2030, (Tylor & Francis), (2019). (Impact Factor:3.32) ISSN: 2574-089X. DOI: https://doi.org/10.1080/25740881.2019.1602140
D. Sahu, N. Sarkar, G. Sahoo, P. Mohapatra and S. K. Swain* “Nano silver imprinted graphene oxide as catalyst in reduction of 4-nitrophenol” Journal of Physical Organic Chemistry, 32(9), 3971,(Wiley), (2019). (Impact Factor: 1.8) ISSN:1099-1395. DOI: https://doi.org/10.1002/poc.3971
K. Prusty, A. Biswal, S. B. Biswal and S. K. Swain* “Synthesis of soy protein/polyacrylamide nanocomposite hydrogels for delivery of ciprofloxacin drug” Materials Chemistry and Physics, 234, 378-289, (Elsevier), (2019). (Impact Factor: 5.0) ISSN: 0254-0584. DOI: https://doi.org/10.1016/j.matchemphys.2019.05.038
D. Sahu, N. Sarkar, P. Mohapatra and S. K. Swain* “Nano gold hybrid polyvinyl alcohol films for sensing of Cu2+ ions” Chemistry Select, 4, 9784-9793, (Wiley-VCH), (2019). (Impact Factor: 2.0)ISSN:2365-6549. DOI: https://doi.org/10.1002/slct.201902167
B. B. Singh, F. Mohanty, S. S. Das*, and S. K. Swain “Graphene sandwiched crumb rubber dispersed hot mix asphalt” Journal of Traffic and Transportation Engineering, 7(5), 652-667, (Elsevier), (2019). (Impact Factor:1.54) ISSN: 2095-7564. DOI: https://doi.org/10.1016/j.jtte.2019.02.003
K. Prusty and S. K. Swain* “Release of ciprofloxacin drugs by nano gold embedded cellulose grafted polyacrylamide hybrid nanocomposite hydrogels” International Journal of Biological Macromolecules, 126(1), 665-675, (Elsevier), (2019). (Impact Factor: 8.5) ISSN:0141-8130.DOI: https://doi.org/10.1016/j.ijbiomac.2018.12.258 0141-8130
P. K. Sethy, K. Prusty, P. Mohapatra and S. K. Swain* “Nanoclay decorated polyacrylic acid-starch hybrid nanocomposite thin films as packaging materials” Polymer Composites, 40, 229–239, (Wiley), (2019). (Impact Factor: 4.7)ISSN: 1548-0569.DOI: https://doi.org/10.1002/pc.24326
D. Sahu, G. Sahoo, P. Mohapatra and S. K. Swain* “Dual activities of nano silver embedded reduced graphene oxide using clove leaf extracts: Hg2+ sensing and catalytic degradation”Chemistry Select, 4, 2593–2602, (Wiley-VCH), (2019). (Impact Factor: 2.0) ISSN: 2365-6549. DOI: https://doi.org/10.1002/slct.201803725
G. Sahoo, N. Sarkar and S. K. Swain* “Effect of layered graphene oxide on the structure and properties of bovine serum albumin grafted polyacrylonitrile hybrid bionanocomposites” Polymer Composites,40(10),3989-4003, (Wiley),(2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.25260
F. Mohanty and S. K. Swain*"Silver nanoparticles decorated polyethylmethacrylate/graphene oxide composite: as packaging material" Polymer Composites, 40, 1199–1207, (Wiley), (2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.24944
F. Mohanty and S. K. Swain* “Nano silver embedded starch hybrid graphene oxide sandwiched poly(ethylmethacrylate) for packaging application” Nano-Structures & Nano-Objects, 18, 100300, (Elsevier), (2019). (Impact Factor:5.06)ISSN: 2352-507X. DOI: https://doi.org/10.1016/j.nanoso.2019.100300
K. Prusty and S. K. Swain* “Nanostructured gold dispersed polyethylmethaacrylate/dextran hybrid composites for packaging applications” Polymer-Plastic Technology and Materials, 58 (18), 2019 – 2030, (Tylor & Francis), (2019). (Impact Factor:3.32) ISSN: 2574-089X. DOI: https://doi.org/10.1080/25740881.2019.1602140
D. Sahu, N. Sarkar, G. Sahoo, P. Mohapatra and S. K. Swain* “Nano silver imprinted graphene oxide as catalyst in reduction of 4-nitrophenol” Journal of Physical Organic Chemistry, 32(9), 3971,(Wiley), (2019). (Impact Factor: 1.8) ISSN:1099-1395. DOI: https://doi.org/10.1002/poc.3971
K. Prusty, A. Biswal, S. B. Biswal and S. K. Swain* “Synthesis of soy protein/polyacrylamide nanocomposite hydrogels for delivery of ciprofloxacin drug” Materials Chemistry and Physics, 234, 378-289, (Elsevier), (2019). (Impact Factor: 5.0) ISSN: 0254-0584. DOI: https://doi.org/10.1016/j.matchemphys.2019.05.038
D. Sahu, N. Sarkar, P. Mohapatra and S. K. Swain* “Nano gold hybrid polyvinyl alcohol films for sensing of Cu2+ ions” Chemistry Select, 4, 9784-9793, (Wiley-VCH), (2019). (Impact Factor: 2.0)ISSN:2365-6549. DOI: https://doi.org/10.1002/slct.201902167
B. B. Singh, F. Mohanty, S. S. Das*, and S. K. Swain “Graphene sandwiched crumb rubber dispersed hot mix asphalt” Journal of Traffic and Transportation Engineering, 7(5), 652-667, (Elsevier), (2019). (Impact Factor:1.54) ISSN: 2095-7564. DOI: https://doi.org/10.1016/j.jtte.2019.02.003
K. Prusty and S. K. Swain* “Release of ciprofloxacin drugs by nano gold embedded cellulose grafted polyacrylamide hybrid nanocomposite hydrogels” International Journal of Biological Macromolecules, 126(1), 665-675, (Elsevier), (2019). (Impact Factor: 8.5) ISSN:0141-8130.DOI: https://doi.org/10.1016/j.ijbiomac.2018.12.258 0141-8130
P. K. Sethy, K. Prusty, P. Mohapatra and S. K. Swain* “Nanoclay decorated polyacrylic acid-starch hybrid nanocomposite thin films as packaging materials” Polymer Composites, 40, 229–239, (Wiley), (2019). (Impact Factor: 4.7)ISSN: 1548-0569.DOI: https://doi.org/10.1002/pc.24326
D. Sahu, G. Sahoo, P. Mohapatra and S. K. Swain* “Dual activities of nano silver embedded reduced graphene oxide using clove leaf extracts: Hg2+ sensing and catalytic degradation”Chemistry Select, 4, 2593–2602, (Wiley-VCH), (2019). (Impact Factor: 2.0) ISSN: 2365-6549. DOI: https://doi.org/10.1002/slct.201803725
G. Sahoo, N. Sarkar and S. K. Swain* “Effect of layered graphene oxide on the structure and properties of bovine serum albumin grafted polyacrylonitrile hybrid bionanocomposites” Polymer Composites,40(10),3989-4003, (Wiley),(2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.25260
F. Mohanty and S. K. Swain*"Silver nanoparticles decorated polyethylmethacrylate/graphene oxide composite: as packaging material" Polymer Composites, 40, 1199–1207, (Wiley), (2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.24944
F. Mohanty and S. K. Swain* “Nano silver embedded starch hybrid graphene oxide sandwiched poly(ethylmethacrylate) for packaging application” Nano-Structures & Nano-Objects, 18, 100300, (Elsevier), (2019). (Impact Factor:5.06)ISSN: 2352-507X. DOI: https://doi.org/10.1016/j.nanoso.2019.100300
K. Prusty and S. K. Swain* “Nanostructured gold dispersed polyethylmethaacrylate/dextran hybrid composites for packaging applications” Polymer-Plastic Technology and Materials, 58 (18), 2019 – 2030, (Tylor & Francis), (2019). (Impact Factor:3.32) ISSN: 2574-089X. DOI: https://doi.org/10.1080/25740881.2019.1602140
D. Sahu, N. Sarkar, G. Sahoo, P. Mohapatra and S. K. Swain* “Nano silver imprinted graphene oxide as catalyst in reduction of 4-nitrophenol” Journal of Physical Organic Chemistry, 32(9), 3971,(Wiley), (2019). (Impact Factor: 1.8) ISSN:1099-1395. DOI: https://doi.org/10.1002/poc.3971
K. Prusty, A. Biswal, S. B. Biswal and S. K. Swain* “Synthesis of soy protein/polyacrylamide nanocomposite hydrogels for delivery of ciprofloxacin drug” Materials Chemistry and Physics, 234, 378-289, (Elsevier), (2019). (Impact Factor: 5.0) ISSN: 0254-0584. DOI: https://doi.org/10.1016/j.matchemphys.2019.05.038
D. Sahu, N. Sarkar, P. Mohapatra and S. K. Swain* “Nano gold hybrid polyvinyl alcohol films for sensing of Cu2+ ions” Chemistry Select, 4, 9784-9793, (Wiley-VCH), (2019). (Impact Factor: 2.0)ISSN:2365-6549. DOI: https://doi.org/10.1002/slct.201902167
B. B. Singh, F. Mohanty, S. S. Das*, and S. K. Swain “Graphene sandwiched crumb rubber dispersed hot mix asphalt” Journal of Traffic and Transportation Engineering, 7(5), 652-667, (Elsevier), (2019). (Impact Factor:1.54) ISSN: 2095-7564. DOI: https://doi.org/10.1016/j.jtte.2019.02.003
K. Prusty and S. K. Swain* “Release of ciprofloxacin drugs by nano gold embedded cellulose grafted polyacrylamide hybrid nanocomposite hydrogels” International Journal of Biological Macromolecules, 126(1), 665-675, (Elsevier), (2019). (Impact Factor: 8.5) ISSN:0141-8130.DOI: https://doi.org/10.1016/j.ijbiomac.2018.12.258 0141-8130
P. K. Sethy, K. Prusty, P. Mohapatra and S. K. Swain* “Nanoclay decorated polyacrylic acid-starch hybrid nanocomposite thin films as packaging materials” Polymer Composites, 40, 229–239, (Wiley), (2019). (Impact Factor: 4.7)ISSN: 1548-0569.DOI: https://doi.org/10.1002/pc.24326
D. Sahu, G. Sahoo, P. Mohapatra and S. K. Swain* “Dual activities of nano silver embedded reduced graphene oxide using clove leaf extracts: Hg2+ sensing and catalytic degradation”Chemistry Select, 4, 2593–2602, (Wiley-VCH), (2019). (Impact Factor: 2.0) ISSN: 2365-6549. DOI: https://doi.org/10.1002/slct.201803725
G. Sahoo, N. Sarkar and S. K. Swain* “Effect of layered graphene oxide on the structure and properties of bovine serum albumin grafted polyacrylonitrile hybrid bionanocomposites” Polymer Composites,40(10),3989-4003, (Wiley),(2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.25260
F. Mohanty and S. K. Swain*"Silver nanoparticles decorated polyethylmethacrylate/graphene oxide composite: as packaging material" Polymer Composites, 40, 1199–1207, (Wiley), (2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.24944
F. Mohanty and S. K. Swain* “Nano silver embedded starch hybrid graphene oxide sandwiched poly(ethylmethacrylate) for packaging application” Nano-Structures & Nano-Objects, 18, 100300, (Elsevier), (2019). (Impact Factor:5.06)ISSN: 2352-507X. DOI: https://doi.org/10.1016/j.nanoso.2019.100300
K. Prusty and S. K. Swain* “Nanostructured gold dispersed polyethylmethaacrylate/dextran hybrid composites for packaging applications” Polymer-Plastic Technology and Materials, 58 (18), 2019 – 2030, (Tylor & Francis), (2019). (Impact Factor:3.32) ISSN: 2574-089X. DOI: https://doi.org/10.1080/25740881.2019.1602140
D. Sahu, N. Sarkar, G. Sahoo, P. Mohapatra and S. K. Swain* “Nano silver imprinted graphene oxide as catalyst in reduction of 4-nitrophenol” Journal of Physical Organic Chemistry, 32(9), 3971,(Wiley), (2019). (Impact Factor: 1.8) ISSN:1099-1395. DOI: https://doi.org/10.1002/poc.3971
K. Prusty, A. Biswal, S. B. Biswal and S. K. Swain* “Synthesis of soy protein/polyacrylamide nanocomposite hydrogels for delivery of ciprofloxacin drug” Materials Chemistry and Physics, 234, 378-289, (Elsevier), (2019). (Impact Factor: 5.0) ISSN: 0254-0584. DOI: https://doi.org/10.1016/j.matchemphys.2019.05.038
D. Sahu, N. Sarkar, P. Mohapatra and S. K. Swain* “Nano gold hybrid polyvinyl alcohol films for sensing of Cu2+ ions” Chemistry Select, 4, 9784-9793, (Wiley-VCH), (2019). (Impact Factor: 2.0)ISSN:2365-6549. DOI: https://doi.org/10.1002/slct.201902167
B. B. Singh, F. Mohanty, S. S. Das*, and S. K. Swain “Graphene sandwiched crumb rubber dispersed hot mix asphalt” Journal of Traffic and Transportation Engineering, 7(5), 652-667, (Elsevier), (2019). (Impact Factor:1.54) ISSN: 2095-7564. DOI: https://doi.org/10.1016/j.jtte.2019.02.003
K. Prusty and S. K. Swain* “Release of ciprofloxacin drugs by nano gold embedded cellulose grafted polyacrylamide hybrid nanocomposite hydrogels” International Journal of Biological Macromolecules, 126(1), 665-675, (Elsevier), (2019). (Impact Factor: 8.5) ISSN:0141-8130.DOI: https://doi.org/10.1016/j.ijbiomac.2018.12.258 0141-8130
P. K. Sethy, K. Prusty, P. Mohapatra and S. K. Swain* “Nanoclay decorated polyacrylic acid-starch hybrid nanocomposite thin films as packaging materials” Polymer Composites, 40, 229–239, (Wiley), (2019). (Impact Factor: 4.7)ISSN: 1548-0569.DOI: https://doi.org/10.1002/pc.24326
D. Sahu, G. Sahoo, P. Mohapatra and S. K. Swain* “Dual activities of nano silver embedded reduced graphene oxide using clove leaf extracts: Hg2+ sensing and catalytic degradation”Chemistry Select, 4, 2593–2602, (Wiley-VCH), (2019). (Impact Factor: 2.0) ISSN: 2365-6549. DOI: https://doi.org/10.1002/slct.201803725
G. Sahoo, N. Sarkar and S. K. Swain* “Effect of layered graphene oxide on the structure and properties of bovine serum albumin grafted polyacrylonitrile hybrid bionanocomposites” Polymer Composites,40(10),3989-4003, (Wiley),(2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.25260
F. Mohanty and S. K. Swain*"Silver nanoparticles decorated polyethylmethacrylate/graphene oxide composite: as packaging material" Polymer Composites, 40, 1199–1207, (Wiley), (2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.24944
F. Mohanty and S. K. Swain* “Nano silver embedded starch hybrid graphene oxide sandwiched poly(ethylmethacrylate) for packaging application” Nano-Structures & Nano-Objects, 18, 100300, (Elsevier), (2019). (Impact Factor:5.06)ISSN: 2352-507X. DOI: https://doi.org/10.1016/j.nanoso.2019.100300
K. Prusty and S. K. Swain* “Nanostructured gold dispersed polyethylmethaacrylate/dextran hybrid composites for packaging applications” Polymer-Plastic Technology and Materials, 58 (18), 2019 – 2030, (Tylor & Francis), (2019). (Impact Factor:3.32) ISSN: 2574-089X. DOI: https://doi.org/10.1080/25740881.2019.1602140
D. Sahu, N. Sarkar, G. Sahoo, P. Mohapatra and S. K. Swain* “Nano silver imprinted graphene oxide as catalyst in reduction of 4-nitrophenol” Journal of Physical Organic Chemistry, 32(9), 3971,(Wiley), (2019). (Impact Factor: 1.8) ISSN:1099-1395. DOI: https://doi.org/10.1002/poc.3971
K. Prusty, A. Biswal, S. B. Biswal and S. K. Swain* “Synthesis of soy protein/polyacrylamide nanocomposite hydrogels for delivery of ciprofloxacin drug” Materials Chemistry and Physics, 234, 378-289, (Elsevier), (2019). (Impact Factor: 5.0) ISSN: 0254-0584. DOI: https://doi.org/10.1016/j.matchemphys.2019.05.038
D. Sahu, N. Sarkar, P. Mohapatra and S. K. Swain* “Nano gold hybrid polyvinyl alcohol films for sensing of Cu2+ ions” Chemistry Select, 4, 9784-9793, (Wiley-VCH), (2019). (Impact Factor: 2.0)ISSN:2365-6549. DOI: https://doi.org/10.1002/slct.201902167
B. B. Singh, F. Mohanty, S. S. Das*, and S. K. Swain “Graphene sandwiched crumb rubber dispersed hot mix asphalt” Journal of Traffic and Transportation Engineering, 7(5), 652-667, (Elsevier), (2019). (Impact Factor:1.54) ISSN: 2095-7564. DOI: https://doi.org/10.1016/j.jtte.2019.02.003
K. Prusty and S. K. Swain* “Release of ciprofloxacin drugs by nano gold embedded cellulose grafted polyacrylamide hybrid nanocomposite hydrogels” International Journal of Biological Macromolecules, 126(1), 665-675, (Elsevier), (2019). (Impact Factor: 8.5) ISSN:0141-8130.DOI: https://doi.org/10.1016/j.ijbiomac.2018.12.258 0141-8130
P. K. Sethy, K. Prusty, P. Mohapatra and S. K. Swain* “Nanoclay decorated polyacrylic acid-starch hybrid nanocomposite thin films as packaging materials” Polymer Composites, 40, 229–239, (Wiley), (2019). (Impact Factor: 4.7)ISSN: 1548-0569.DOI: https://doi.org/10.1002/pc.24326
D. Sahu, G. Sahoo, P. Mohapatra and S. K. Swain* “Dual activities of nano silver embedded reduced graphene oxide using clove leaf extracts: Hg2+ sensing and catalytic degradation”Chemistry Select, 4, 2593–2602, (Wiley-VCH), (2019). (Impact Factor: 2.0) ISSN: 2365-6549. DOI: https://doi.org/10.1002/slct.201803725
G. Sahoo, N. Sarkar and S. K. Swain* “Effect of layered graphene oxide on the structure and properties of bovine serum albumin grafted polyacrylonitrile hybrid bionanocomposites” Polymer Composites,40(10),3989-4003, (Wiley),(2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.25260
F. Mohanty and S. K. Swain*"Silver nanoparticles decorated polyethylmethacrylate/graphene oxide composite: as packaging material" Polymer Composites, 40, 1199–1207, (Wiley), (2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.24944
F. Mohanty and S. K. Swain* “Nano silver embedded starch hybrid graphene oxide sandwiched poly(ethylmethacrylate) for packaging application” Nano-Structures & Nano-Objects, 18, 100300, (Elsevier), (2019). (Impact Factor:5.06)ISSN: 2352-507X. DOI: https://doi.org/10.1016/j.nanoso.2019.100300
K. Prusty and S. K. Swain* “Nanostructured gold dispersed polyethylmethaacrylate/dextran hybrid composites for packaging applications” Polymer-Plastic Technology and Materials, 58 (18), 2019 – 2030, (Tylor & Francis), (2019). (Impact Factor:3.32) ISSN: 2574-089X. DOI: https://doi.org/10.1080/25740881.2019.1602140
D. Sahu, N. Sarkar, G. Sahoo, P. Mohapatra and S. K. Swain* “Nano silver imprinted graphene oxide as catalyst in reduction of 4-nitrophenol” Journal of Physical Organic Chemistry, 32(9), 3971,(Wiley), (2019). (Impact Factor: 1.8) ISSN:1099-1395. DOI: https://doi.org/10.1002/poc.3971
K. Prusty, A. Biswal, S. B. Biswal and S. K. Swain* “Synthesis of soy protein/polyacrylamide nanocomposite hydrogels for delivery of ciprofloxacin drug” Materials Chemistry and Physics, 234, 378-289, (Elsevier), (2019). (Impact Factor: 5.0) ISSN: 0254-0584. DOI: https://doi.org/10.1016/j.matchemphys.2019.05.038
D. Sahu, N. Sarkar, P. Mohapatra and S. K. Swain* “Nano gold hybrid polyvinyl alcohol films for sensing of Cu2+ ions” Chemistry Select, 4, 9784-9793, (Wiley-VCH), (2019). (Impact Factor: 2.0)ISSN:2365-6549. DOI: https://doi.org/10.1002/slct.201902167
B. B. Singh, F. Mohanty, S. S. Das*, and S. K. Swain “Graphene sandwiched crumb rubber dispersed hot mix asphalt” Journal of Traffic and Transportation Engineering, 7(5), 652-667, (Elsevier), (2019). (Impact Factor:1.54) ISSN: 2095-7564. DOI: https://doi.org/10.1016/j.jtte.2019.02.003
K. Prusty and S. K. Swain* “Release of ciprofloxacin drugs by nano gold embedded cellulose grafted polyacrylamide hybrid nanocomposite hydrogels” International Journal of Biological Macromolecules, 126(1), 665-675, (Elsevier), (2019). (Impact Factor: 8.5) ISSN:0141-8130.DOI: https://doi.org/10.1016/j.ijbiomac.2018.12.258 0141-8130
P. K. Sethy, K. Prusty, P. Mohapatra and S. K. Swain* “Nanoclay decorated polyacrylic acid-starch hybrid nanocomposite thin films as packaging materials” Polymer Composites, 40, 229–239, (Wiley), (2019). (Impact Factor: 4.7)ISSN: 1548-0569.DOI: https://doi.org/10.1002/pc.24326
D. Sahu, G. Sahoo, P. Mohapatra and S. K. Swain* “Dual activities of nano silver embedded reduced graphene oxide using clove leaf extracts: Hg2+ sensing and catalytic degradation”Chemistry Select, 4, 2593–2602, (Wiley-VCH), (2019). (Impact Factor: 2.0) ISSN: 2365-6549. DOI: https://doi.org/10.1002/slct.201803725
G. Sahoo, N. Sarkar and S. K. Swain* “Effect of layered graphene oxide on the structure and properties of bovine serum albumin grafted polyacrylonitrile hybrid bionanocomposites” Polymer Composites,40(10),3989-4003, (Wiley),(2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.25260
F. Mohanty and S. K. Swain*"Silver nanoparticles decorated polyethylmethacrylate/graphene oxide composite: as packaging material" Polymer Composites, 40, 1199–1207, (Wiley), (2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.24944
F. Mohanty and S. K. Swain* “Nano silver embedded starch hybrid graphene oxide sandwiched poly(ethylmethacrylate) for packaging application” Nano-Structures & Nano-Objects, 18, 100300, (Elsevier), (2019). (Impact Factor:5.06)ISSN: 2352-507X. DOI: https://doi.org/10.1016/j.nanoso.2019.100300
K. Prusty and S. K. Swain* “Nanostructured gold dispersed polyethylmethaacrylate/dextran hybrid composites for packaging applications” Polymer-Plastic Technology and Materials, 58 (18), 2019 – 2030, (Tylor & Francis), (2019). (Impact Factor:3.32) ISSN: 2574-089X. DOI: https://doi.org/10.1080/25740881.2019.1602140
D. Sahu, N. Sarkar, G. Sahoo, P. Mohapatra and S. K. Swain* “Nano silver imprinted graphene oxide as catalyst in reduction of 4-nitrophenol” Journal of Physical Organic Chemistry, 32(9), 3971,(Wiley), (2019). (Impact Factor: 1.8) ISSN:1099-1395. DOI: https://doi.org/10.1002/poc.3971
K. Prusty, A. Biswal, S. B. Biswal and S. K. Swain* “Synthesis of soy protein/polyacrylamide nanocomposite hydrogels for delivery of ciprofloxacin drug” Materials Chemistry and Physics, 234, 378-289, (Elsevier), (2019). (Impact Factor: 5.0) ISSN: 0254-0584. DOI: https://doi.org/10.1016/j.matchemphys.2019.05.038
D. Sahu, N. Sarkar, P. Mohapatra and S. K. Swain* “Nano gold hybrid polyvinyl alcohol films for sensing of Cu2+ ions” Chemistry Select, 4, 9784-9793, (Wiley-VCH), (2019). (Impact Factor: 2.0)ISSN:2365-6549. DOI: https://doi.org/10.1002/slct.201902167
B. B. Singh, F. Mohanty, S. S. Das*, and S. K. Swain “Graphene sandwiched crumb rubber dispersed hot mix asphalt” Journal of Traffic and Transportation Engineering, 7(5), 652-667, (Elsevier), (2019). (Impact Factor:1.54) ISSN: 2095-7564. DOI: https://doi.org/10.1016/j.jtte.2019.02.003
K. Prusty and S. K. Swain* “Release of ciprofloxacin drugs by nano gold embedded cellulose grafted polyacrylamide hybrid nanocomposite hydrogels” International Journal of Biological Macromolecules, 126(1), 665-675, (Elsevier), (2019). (Impact Factor: 8.5) ISSN:0141-8130.DOI: https://doi.org/10.1016/j.ijbiomac.2018.12.258 0141-8130
P. K. Sethy, K. Prusty, P. Mohapatra and S. K. Swain* “Nanoclay decorated polyacrylic acid-starch hybrid nanocomposite thin films as packaging materials” Polymer Composites, 40, 229–239, (Wiley), (2019). (Impact Factor: 4.7)ISSN: 1548-0569.DOI: https://doi.org/10.1002/pc.24326
D. Sahu, G. Sahoo, P. Mohapatra and S. K. Swain* “Dual activities of nano silver embedded reduced graphene oxide using clove leaf extracts: Hg2+ sensing and catalytic degradation”Chemistry Select, 4, 2593–2602, (Wiley-VCH), (2019). (Impact Factor: 2.0) ISSN: 2365-6549. DOI: https://doi.org/10.1002/slct.201803725
G. Sahoo, N. Sarkar and S. K. Swain* “Effect of layered graphene oxide on the structure and properties of bovine serum albumin grafted polyacrylonitrile hybrid bionanocomposites” Polymer Composites,40(10),3989-4003, (Wiley),(2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.25260
F. Mohanty and S. K. Swain*"Silver nanoparticles decorated polyethylmethacrylate/graphene oxide composite: as packaging material" Polymer Composites, 40, 1199–1207, (Wiley), (2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.24944
F. Mohanty and S. K. Swain* “Nano silver embedded starch hybrid graphene oxide sandwiched poly(ethylmethacrylate) for packaging application” Nano-Structures & Nano-Objects, 18, 100300, (Elsevier), (2019). (Impact Factor:5.06)ISSN: 2352-507X. DOI: https://doi.org/10.1016/j.nanoso.2019.100300
K. Prusty and S. K. Swain* “Nanostructured gold dispersed polyethylmethaacrylate/dextran hybrid composites for packaging applications” Polymer-Plastic Technology and Materials, 58 (18), 2019 – 2030, (Tylor & Francis), (2019). (Impact Factor:3.32) ISSN: 2574-089X. DOI: https://doi.org/10.1080/25740881.2019.1602140
D. Sahu, N. Sarkar, G. Sahoo, P. Mohapatra and S. K. Swain* “Nano silver imprinted graphene oxide as catalyst in reduction of 4-nitrophenol” Journal of Physical Organic Chemistry, 32(9), 3971,(Wiley), (2019). (Impact Factor: 1.8) ISSN:1099-1395. DOI: https://doi.org/10.1002/poc.3971
K. Prusty, A. Biswal, S. B. Biswal and S. K. Swain* “Synthesis of soy protein/polyacrylamide nanocomposite hydrogels for delivery of ciprofloxacin drug” Materials Chemistry and Physics, 234, 378-289, (Elsevier), (2019). (Impact Factor: 5.0) ISSN: 0254-0584. DOI: https://doi.org/10.1016/j.matchemphys.2019.05.038
Padhi, P. K. â€œA Critical Interpretation of Black Humour in Charles Wrightâ€™s The Messenger and The Wigâ€ in International Journal of Recent Technology and Engineering (IJRTE) Volume-8, Issue-4, November 2019, ISSN: 2277-3878. (SCOPUS indexed), P- 7328
Padhi, P. K. â€œA Critical Interpretation of Black Humour in Charles Wrightâ€™s The Messenger and The Wigâ€ in International Journal of Recent Technology and Engineering (IJRTE) Volume-8, Issue-4, November 2019, ISSN: 2277-3878. (SCOPUS indexed), P- 7328
Padhi, P. K. â€œA Critical Interpretation of Black Humour in Charles Wrightâ€™s The Messenger and The Wigâ€ in International Journal of Recent Technology and Engineering (IJRTE) Volume-8, Issue-4, November 2019, ISSN: 2277-3878. (SCOPUS indexed), P- 7328
Padhi, P. K. â€œA Critical Interpretation of Black Humour in Charles Wrightâ€™s The Messenger and The Wigâ€ in International Journal of Recent Technology and Engineering (IJRTE) Volume-8, Issue-4, November 2019, ISSN: 2277-3878. (SCOPUS indexed), P- 7328
B. Panda, M. Mohanty and, B. Rout, Classification of Electrical Home Appliances Based on Harmonic Analysis Using ANN Progress in Advanced Computing and Intelligent Engineering, Advances in Intelligent Systems and Computing, Springer Nature Singapore Pte Ltd. 2019, pp.273-278,https://doi.org/10.1007/978-981-13-0224-4
B. Panda, M. Mohanty and, B. Rout, Classification of Electrical Home Appliances Based on Harmonic Analysis Using ANN Progress in Advanced Computing and Intelligent Engineering, Advances in Intelligent Systems and Computing, Springer Nature Singapore Pte Ltd. 2019, pp.273-278,https://doi.org/10.1007/978-981-13-0224-4
B. Panda, M. Mohanty and, B. Rout, Classification of Electrical Home Appliances Based on Harmonic Analysis Using ANN Progress in Advanced Computing and Intelligent Engineering, Advances in Intelligent Systems and Computing, Springer Nature Singapore Pte Ltd. 2019, pp.273-278,https://doi.org/10.1007/978-981-13-0224-4
B. Panda, M. Mohanty and, B. Rout, Classification of Electrical Home Appliances Based on Harmonic Analysis Using ANN Progress in Advanced Computing and Intelligent Engineering, Advances in Intelligent Systems and Computing, Springer Nature Singapore Pte Ltd. 2019, pp.273-278,https://doi.org/10.1007/978-981-13-0224-4
B. Panda, M. Mohanty and, B. Rout, Classification of Electrical Home Appliances Based on Harmonic Analysis Using ANN Progress in Advanced Computing and Intelligent Engineering, Advances in Intelligent Systems and Computing, Springer Nature Singapore Pte Ltd. 2019, pp.273-278,https://doi.org/10.1007/978-981-13-0224-4
B. Panda, M. Mohanty and, B. Rout, Classification of Electrical Home Appliances Based on Harmonic Analysis Using ANN Progress in Advanced Computing and Intelligent Engineering, Advances in Intelligent Systems and Computing, Springer Nature Singapore Pte Ltd. 2019, pp.273-278,https://doi.org/10.1007/978-981-13-0224-4
"A New Mobility Control Approach for Improved Route Availability in Mobile Ad hoc Networks", Bata Krishna Tripathy, Swagat Kumar Jena, Padma Lochan Bera& Satyabrata Das, Arabian Journal for Science and Engineering,(SCI), https://link.springer.com/article/10.1007/s13369-019-03899-3,DOI:https://doi.org/10.1007/s13369-019-03899-3
"Award-Reward Protocol Based on Clustering and Trust Level for Routing in Delay Tolerant Network", Pradosh Kumar Gantayat & Satyabrata Das, Journal of Applied Security Research (Taylor & Francis 2019)Volume14,issue3,page270-287(Scopus), https://doi.org/10.1080/19361610.2019.1621593
"Minimization of Energy Hole in Under Water Sensor Networks"(UWSNs)&(180717-115405), Niva Tripathy & Satyabrata Das, International Journal of Natural Computing Research (IJNCR) igi-global 2019, Vol 8 Issue 4, Article 1, https://www.igi-global.com/article/minimization-of-energy-hole-in-under-water-sensor-networks-uwsns/237980,DOI:10.4018/IJNCR.2019100101
"Minimization of Energy-Holes in Wireless Sensor Network (WSN) Using Hierarchical Routing Protocols", Chinmaya Kumar Nayak & Satyabrata Das, J. Comput. Theor. Nanosci.(Scopus) Vol 16, Number 5-6,PP.2357-2361 (2019),https://www.ingentaconnect.com/content/asp/jctn/2019/00000016/f0020005/art00101,DOI: 10.1166/jctn.2019.7899
"Secure Trust Level Routing in Delay Tolerant Network with Fuzzy Empowered Node Categorization Technique", Pradosh Kumar Gantayat & Satyabrata Das, J. Comput. Theor. Nanosci. (Scopus) 16, 2294-2298 (2019)https://www.ingentaconnect.com/content/asp/jctn/2019/00000016/f0020005/art00089,DOI:https://doi.org/10.1166/jctn.2019.7887
"A Kerberos Based Secure Communication System in Smart (Internet of Things) Environment", Swagat Kumar Jena, Bata Krishna Tripathy, Prachi Gupta & Satyabrata Das, J. Comput. Theor. Nanosci.(Scopus) 16, 2381-2388 (2019), https://www.ingentaconnect.com/content/asp/jctn/2019/00000016/f0020005/art00106,DOI:https://doi.org/10.1166/jctn.2019.7904
Biswal, T*., Priyadarsini, M., & Dash, S. (2019). Sustainable biocomposite manufacturing processes and applications. Egyptian Journal of Chemistry, 62(4), 751-766 (Scopus, ESCI).
Biswal, T*., Barik P. (2019) Assessment, characterization and Eco-Utilization study of solid waste generated from Steel Industries, India- An Overview, International Journal of green and herbal Chemistry, 8(1) ,1-15,
Swain, P. K., Biswal, T*., & Panda, R. B. (2019) Solid Waste Generation in The Rourkela Steel Plant, Its Recycling and Eco-Utilization, Pollution Research. 38 (2), 182-191 (Scopus).
Swain, P. K., Biswal, T*., & Panda, R. B. (2019) Physico-Chemical and Mineralogical Properties of Fly Ash Of Rourkela Steel Plant, Odisha And Its Eco-utilization, Pollution Research, 38 (2), 144-152 (Scopus).
Biswal, T., Sahoo, A., Panda, P. K, & Panda, R.B. (2019) Water Quality Assessment Of River Brahmani Near By Talcher-Angul Industrial Complex, Odisha, India, Pollution Research, 38(2), 137-143 (Scopus).
B. Panda, M. Mohanty and, B. Rout, Classification of Electrical Home Appliances Based on Harmonic Analysis Using ANN Progress in Advanced Computing and Intelligent Engineering, Advances in Intelligent Systems and Computing, Springer Nature Singapore Pte Ltd. 2019, pp.273-278,https://doi.org/10.1007/978-981-13-0224-4
B. Panda, M. Mohanty and, B. Rout, Classification of Electrical Home Appliances Based on Harmonic Analysis Using ANN Progress in Advanced Computing and Intelligent Engineering, Advances in Intelligent Systems and Computing, Springer Nature Singapore Pte Ltd. 2019, pp.273-278,https://doi.org/10.1007/978-981-13-0224-4
B. Panda, M. Mohanty and, B. Rout, Classification of Electrical Home Appliances Based on Harmonic Analysis Using ANN Progress in Advanced Computing and Intelligent Engineering, Advances in Intelligent Systems and Computing, Springer Nature Singapore Pte Ltd. 2019, pp.273-278,https://doi.org/10.1007/978-981-13-0224-4
B. Panda, M. Mohanty and, B. Rout, Classification of Electrical Home Appliances Based on Harmonic Analysis Using ANN Progress in Advanced Computing and Intelligent Engineering, Advances in Intelligent Systems and Computing, Springer Nature Singapore Pte Ltd. 2019, pp.273-278,https://doi.org/10.1007/978-981-13-0224-4
B. Panda, M. Mohanty and, B. Rout, Classification of Electrical Home Appliances Based on Harmonic Analysis Using ANN Progress in Advanced Computing and Intelligent Engineering, Advances in Intelligent Systems and Computing, Springer Nature Singapore Pte Ltd. 2019, pp.273-278,https://doi.org/10.1007/978-981-13-0224-4
B. Panda, M. Mohantyand, B. Rout, Classification of Electrical Home Appliances Based on Harmonic Analysis Using ANN Progress in Advanced Computing and Intelligent Engineering, Advances in Intelligent Systems and Computing, Springer Nature Singapore Pte Ltd. 2019, pp.273-278,https://doi.org/10.1007/978-981-13-0224-4
Ranjan, S., Khan, R., Dash, S., Mahapatra, T.R., Panda, S.K. (2019) Thermo-elastic free vibration analysis of functionally graded flat panel with temperature gradient along thickness, IOP Conference Series: Materials Science and Engineering, 2019, 577(1), 012123 (IF: 0.39) (SCOPUS)
B Dash, M Das, M Das, TR Mahapatra, D Mishra, (2019) A concise review on machinability of NiTi shape memory alloys, Materials Today: Proceedings, 18(7), 5141-5150. doi: 10.1016/j.matpr.2019.07.511. (IF: 2.59, SCOPUS)
S Jaypuria, S Khandai, TR Mahapatra, A Singh, (2019) Development of activated flux for deep penetration in GTAW, Materials Today: Proceedings, 18(7), 4703-4710. doi: 10.1016/j.matpr.2019.07.456. (IF: 2.59, SCOPUS)
M Das, D Mishra, TR Mahapatra, (2019) Machinability of Metal Matrix Composites: A Review, Materials Today: Proceedings, 18(7), 5373-5381. doi: 10.1016/j.matpr.2019.07.564. (IF: 2.59, SCOPUS)
S Jaypuria, TR Mahapatra, O Jaypuria, (2019) Metaheuristic tuned ANFIS model for input-output modeling of friction stir welding, Materials Today: Proceedings, 18(7), 3922-3930. doi: 10.1016/j.matpr.2019.07.332. (IF: 2.59, SCOPUS)
Dash, S., Mehar, K., Sharma, N., Mahapatra, T. R., Panda, S. K. (2019) Finite element solution of stress and flexural strength of functionally graded doubly curved sandwich shell panel, Earthquake and Structures, Vol. 16 (1), pp. 55-67, DOI: 10.12989/eas.2019.16.1.055, SCIE (IF: 1.309)
Singh, V. K., Hirwani, C. K., Panda, S. K., Mahapatra, T. R. and Mehar, K., (2019) Numerical and Experimental Nonlinear Dynamic Response Reduction of Smart Composite Curved Structure using Collocation and Non-collocation Configuration, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 233 (5), pp. 1601-1619, DOI: 10.1177/0954406218774362, (IF: 1.015) SCI
Sahoo, S. S., Panda, S. K., Mahapatra, T. R., and Hirwani, C. K., (2019), Numerical analysis of transient responses of delaminated layered structure using different mid-plane theories and experimental validation, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, Vol. 43 (1), pp. 41-56, DOI: 10.1007/s40997-017-0111-3 (IF: 0.595) SCI
Mehar, K., Panda, S. K., Mahapatra, T. R., (2019), Large-deformation bending responses of nanotube-reinforced polymer composite panel structure- numerical and experimental analysis, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Vol. 233 (5), pp. 1695-1704, DOI: 10.1177/0954410018761192, (IF: 0.809) SCI
Sharma, N., Mahapatra, T. R. and Panda, S. K., (2019) Vibroacoustic analysis of thermo-elastic laminated composite sandwich curved panel: A higher-order FEM-BEM approach, International Journal of Mechanics and Materials in Design Vol. 15(2), pp. 271-289, DOI: 10.1007/s10999-018-9426-5, (IF: 3.561, SCI)
Sharma, N., Mahapatra, T. R. and Panda, S. K., (2019) Hygrothermal effect on vibroacoustic behaviour of higher-order sandwich panel structure with laminated composite face sheets, Engineering Structures, Vol. 197, pp. 109355, DOI: 10.1016/j.engstruct.2019.109355. (IF: 5.58, SCI)
Patnaik, P. K., Swain, P. T. R., & Biswas, S., â€œInvestigation of mechanical and abrasive wear behavior of blast furnace slagâ€filled needleâ€punched nonwoven viscose fabric epoxy hybrid compositesâ€, Polymer Composites, vol. 40, no. 6, pp. 2335-2345, 2019, doi: https://doi.org/10.1002/pc.25090
Patnaik, P. K., Swain, P. T. R., & Purohit, A., â€œSelection of composite materials for structural applications through MCDM approachâ€, Materials Today: Proceedings, vol. 18, pp. 3454-3461, 2019, doi: https://doi.org/10.1016/j.matpr.2019.07.273
Purohit, A., Satapathy, A., Swain, P. T. R., & Patnaik, P. K., â€œA study on erosion wear behavior of ld sludge reinforced polypropylene compositeâ€, Materials Today: Proceedings, vol. 18, pp. 4299-4304, 2019, doi: https://doi.org/10.1016/j.matpr.2019.07.388
Nagender Kumar Suryadevara and Gyan Ranjan Biswal, “Smart Plugs: Paradigms and Applications in the Smart City-and-Smart Grid,” Energies, MDPI, Vol. 12, No. 10, Art. No. 1957, pp. 01 – 20, May 2019. (IF: 3.252) {Invited Paper}
Amit Kumar Roy, Prasenjit Basak, and Gyan Ranjan Biswal, “Low voltage ride through capability enhancement in a grid-connected wind/fuel cell hybrid system via combined feed-forward and fuzzy logic control,” IET Generation Transmission and Distribution, Vol. xx, No. x, pp. 01 – 11, Apr. 2019. DOI: 10.1049/iet-gtd.2019.0021 (IF: 2.503)
Padhi, P. K. â€œA Critical Interpretation of Black Humour in Charles Wrightâ€™s The Messenger and The Wigâ€ in International Journal of Recent Technology and Engineering (IJRTE) Volume-8, Issue-4, November 2019, ISSN: 2277-3878. (SCOPUS indexed), P- 7328
Workspace optimisation of 3R manipulator-a multi-objective approach
A comparative study of stability characteristics of mahua and jatropha biodiesel and their blends
Dry turning of AISI D3 steel using a mixed ceramic insert: A study
1Jena, S. and Panigrahi, R., 2019, Performance assessment of geopolymer concrete with partial replacement of ferrochrome slag as coarse aggregate, Construction and Building Materials, Elsevier, Vol 220, 525-537. SCIE
Jena, S., Panigrahi, R. and Sahu, P., 2019, Mechanical and Durability Properties of Fly Ash Geopolymer Concrete with Silica Fume, Journal of Institute of Engineers (India): Series A, Springer, Vol 100, 697–705.Scopus
Jena, S. and Panigrahi, R., 2019, Parametric study on sustainable geopolymer concrete, International Journal of Sustainable Materials and Structural Systems, Vol 3, Issue 3-4, 218-234.
Mishra, A. (2019). Resource Allocation by Multi-Coloring Using Different Graph Traversal Methods. International Journal of Research and Analytical Reviews
L. Mohanty, P. Istalkar and B. Biswal (2023) Dynamic aspects of suspended-sediment-concentration recession curves, Journal of Hydrology, Volume 617, Part C, 2023, 129107, ISSN 0022-1694, https://doi.org/10.1016/j.jhydrol.2023.129107
R. L. Sahu, R. R. Dash, P. K. Pradhan, and P. Das, â€˜Effect of hydrogeological factors on removal of turbidity during river bank filtration: Laboratory and field studiesâ€™, Groundw. Sustain. Dev., vol. 9, p. 100229, Oct. 2019. https://doi.org/10.1016/j.gsd.2019.100229
Numerical study of MHD flow and heat transfer of an unsteady third grade fluid with viscous dissipation (I Nayak) J.-IAENG Int. j. of applied mathematics, Vol.-49(2), pg.-245-252, ISSN No.-1992-9986(2019).
B. Senapati, S.Kisan, “Fractal Image Compression using Region of Interest (ROI)”, Advances in Computer Science and Information Technology (ACSIT), p-ISSN: 2393-9907; e-ISSN: 2393-9915; Volume 6, Issue 1; January-March, 2019, pp. 39-43.
"A New Mobility Control Approach for Improved Route Availability in Mobile Ad hoc Networks", Bata Krishna Tripathy, Swagat Kumar Jena, Padma Lochan Bera& Satyabrata Das, Arabian Journal for Science and Engineering,(SCI), https://link.springer.com/article/10.1007/s13369-019-03899-3,DOI:https://doi.org/10.1007/s13369-019-03899-3
"Award-Reward Protocol Based on Clustering and Trust Level for Routing in Delay Tolerant Network", Pradosh Kumar Gantayat & Satyabrata Das, Journal of Applied Security Research (Taylor & Francis 2019)Volume14,issue3,page270-287(Scopus), https://doi.org/10.1080/19361610.2019.1621593
"Minimization of Energy Hole in Under Water Sensor Networks"(UWSNs)&(180717-115405), Niva Tripathy & Satyabrata Das, International Journal of Natural Computing Research (IJNCR) igi-global 2019, Vol 8 Issue 4, Article 1, https://www.igi-global.com/article/minimization-of-energy-hole-in-under-water-sensor-networks-uwsns/237980,DOI:10.4018/IJNCR.2019100101
"Minimization of Energy-Holes in Wireless Sensor Network (WSN) Using Hierarchical Routing Protocols", Chinmaya Kumar Nayak & Satyabrata Das, J. Comput. Theor. Nanosci.(Scopus) Vol 16, Number 5-6,PP.2357-2361 (2019),https://www.ingentaconnect.com/content/asp/jctn/2019/00000016/f0020005/art00101,DOI: 10.1166/jctn.2019.7899
"Secure Trust Level Routing in Delay Tolerant Network with Fuzzy Empowered Node Categorization Technique", Pradosh Kumar Gantayat & Satyabrata Das, J. Comput. Theor. Nanosci. (Scopus) 16, 2294-2298 (2019)https://www.ingentaconnect.com/content/asp/jctn/2019/00000016/f0020005/art00089,DOI:https://doi.org/10.1166/jctn.2019.7887
"A Kerberos Based Secure Communication System in Smart (Internet of Things) Environment", Swagat Kumar Jena, Bata Krishna Tripathy, Prachi Gupta & Satyabrata Das, J. Comput. Theor. Nanosci.(Scopus) 16, 2381-2388 (2019), https://www.ingentaconnect.com/content/asp/jctn/2019/00000016/f0020005/art00106,DOI:https://doi.org/10.1166/jctn.2019.7904
D. Konhar, D. Mishra, S. N. Mishra, “A Low Profile Circularly Polarized monopole antenna for WPAN” International Journal of Engineering and advanced Technology, Vol. 8, No. 5, pp 478-482, June 2019. (SCOPUS).
S. N. Mishra, D. Konhar, D. Mishra, R. K. Mishra, “Biconcave Microstrip Antenna”, International Journal of Recent Technology and Engineering, Volume-8, Issue-1, May 2019 (SCOPUS)
Samantaray, Leena; Panda, Rutuparna; Agrawal, Sanjay; , Design of Maximally Flat Filters for Signal Processing Applications, WSEAS Transactions on Signal Processing, Volume 15.0, Pages 55-64, WSEAS
Agrawal, Sanjay; Panda, Rutuparna; Kumari, Swati; Dora, Lingraj; Abraham, Ajith; , A New Hybrid Multifocus Image Fusion Model Using Single Optimum Gabor Filter, Revue d'Intelligence Artificielle, Volume 33.0, Number 2, Pages 111-118
Mishro, Pranaba K; Agrawal, Sanjay; Panda, Rutuparna; , Medical image denoising using spline based fuzzy wavelet shrink technique, International Conference on Computer Vision and Image Processing, Pages 185-194, Springer Singapore Singapore
Dora, Lingraj; Agrawal, Sanjay; Panda, Rutuparna; Abraham, Ajith; , A novel optimal Gabor algorithm for face classification, Soft Computing for Problem Solving: SocProS 2017, Volume 2, Pages 821-832, Springer Singapore
Meher, Bikash; Agrawal, Sanjay; Panda, Rutuparna; Abraham, Ajith; , A survey on region based image fusion methods, Information Fusion, Volume 48.0, Pages 119-132, Elsevier
Panigrahi, S. K and Rout, S. S. (2019), “Effect of Anchorage Length on GFRP Strengthened RC-T Beam”, International Conference on Computational Mechanics and Simulations (ICCMS), IIT Mandi, pp 01-09, 11th-13th, December.
Priyadarshini, S.; Guru, P. S.; Ramakrishna, D. S.; Dash, S. Cr(VI) Oxidation of Cholesterol—A Kinetic Study Using N-Cetylpicolinium Dichromates, A Class of Novel Phase Transfer Oxidants. Kinetics and Catalysis, 2019, 60, 147–154. https://doi.org/10.1134/s0023158419020083. (SCI & SCOPUS)
D. Sahu, G Sahoo, P Mohapatra and S K Swain* â€œNano Gold Hybrid Polyvinyl Alcohol Films for Sensing of Cu2+ ionsâ€ Chemistry Select, (Wiley-VCH) 4, 001 â€“011 (2019). (Impact Factor: 1.716) DOI: doi.org/10.1002/slct.201902167.
P. K Sethi, K. Prusty, P Mohapatra and S K Swain* â€œNano CaCO3 embodied poly acrylic acid/dextran nanocomposites for packaging applicationsâ€ Journal of Applied Polymer Science (Wiley), 136, 48298 (2019). DOI: 10.1002/app.48298 (Impact Factor: 1.991).
B B Singh, F Mohanty, S S Das*, and S K Swain â€œGraphene sandwiched crumb rubber dispersed hot mix asphaltâ€ Journal of Traffic and Transportation Engineering, (Elsevier), (2019) Doi. org/10.1016/j.jtte.2019.02.003. (Impact Factor:1.48)
K Prusty and S K Swain* â€œRelease of ciprofloxacin drugs by nano gold embedded cellulose grafted polyacrylamide hybrid nanocomposite hydrogelsâ€ International Journal of Biological Macromolecules (Elsevier), 126(1), 665-675 (2019) Doi.org/10.1016/j.ijbiomac.2018.12.258 0141-8130. (Impact Factor: 4.784).
P K Sethy, K Prusty, P Mohapatra and S K Swain* â€œNanoclay Decorated Polyacrylic acid-starch Hybrid Nanocomposite Thin Films as Packaging Materialsâ€ Polymer Composites (Wiley), 40:229â€“239, (2019). DOI: 10.1002/pc.24326 (Impact Factor: 2.262).
D. Sahu, G Sahoo, P Mohapatra and S K Swain* â€œDual Activities of Nano Silver Embedded Reduced Graphene Oxide Using Clove Leaf Extracts: Hg2+ Sensing and Catalytic degradationâ€ Chemistry Select, (Wiley-VCH) 4, 2593â€“2602 (2019). (Impact Factor: 1.716) DOI: 10.1002/slct.201803725.
G Sahoo, N Sarkar and S K Swain* â€œEffect of layered graphene oxide on the structure and properties of bovine serum albumin grafted polyacrylonitrile hybrid bionanocompositesâ€ Polymer Composites (Wiley), (2019). DOI:10.1002/pc.25260 (Impact Factor: 2.262).
F. Mohanty and S K Swain* "Silver Nanoparticles Decorated Polyethylmethacrylate/Graphene Oxide Composite: As Packaging Material" Polymer Composites (Wiley), 40: E1199â€“ E1207, 2019. (Impact Factor: 2.262) DOI:10.1002/pc.24944.
F Mohanty and S K Swain* â€œNano silver embedded starch hybrid graphene oxide sandwiched poly(ethylmethacrylate) for packaging applicationâ€ Nano-Structures & Nano-Objects (Elsevier), 18: 100300 (2019). doi.org/10.1016/j.nanoso.2019.100300 (Impact Factor: 0.772) Accepted.
K Prusty and S K Swain* â€œNanostructured gold dispersed polyethylmethaacrylate/dextran hybrid composites for packaging applicationsâ€ Polymer-Plastic Technology and Engineering, (Tylor & Francis), (2019) (Impact Factor: 1.705). DOI: 10.1080/25740881.2019.1602140.
D. Sahu, N Sarkar, G. Sahoo, P Mohapatra and S K Swain* â€œNano silver imprinted graphene oxide as catalyst in reduction of 4-nitrophenolâ€ Journal of Physical Organic Chemistry (Wiley), (Impact Factor: 1.53) DOI:10.1002/poc.3971 (2019).
K Prusty, A Biswal, S B Biswal and S K Swain*, â€œSynthesis of soy protein/polyacrylamide nanocomposite hydrogels for delivery of ciprofloxacin drugâ€ Materials Chemistry and Physics (Elsevier), 234, 378-289(2019). (Impact Factor: 2.781) doi.org/10.1016/j.matchemphys.2019.05.038.
S. Sahu and S. Behera, “Improved pole-placement for adaptive pitch control,” International Journal of Swarm Intelligence (Inderscience), 4(2), pp.111-126, 2019. DOI: https://doi.org/10.1504/IJSI.2019.104087 ISSN: 2049-405X
S. Behera, S.K. Behera and B.B. Pati, “Control of DFIG for WECS under disturbances from grid,” Proceedings of Engineering and Technology Innovation (PETI), vol.13, pp.10-19, 2019. (Scopus) DOI: https://core.ac.uk/download/pdf/228834148.pdf ISSN: 2413-7416
Deepak Kumar Lal, and Ajit Kumar Barisal, "Combined load frequency and terminal voltage control of power systems using moth flame optimization algorithm", Journal of Electrical Systems and Information Technology (Springer Publications), Volume 6 (8), pp. 1-24, 2019. https://doi:10.1186/s43067-019-0010-3
Soudamini Behera, Ajit Kumar Barisal, Nirmalya Dhal, and Deepak Kumar Lal, "Mitigation of power oscillations using hybrid DE-PSO optimization-based SSSC damping controller", Journal of Electrical Systems and Information Technology (Springer Publications), Volume 6 (5), pp. 1-17, 2019. https://doi:10.1186/s43067-019-0007-y
Deepak Kumar Lal, A. K. Barisal, and M. Tripathy, â€œDifferential evolution algorithm optimized dual mode load frequency controller for isolated wind-diesel power system with SMES & fuel cellâ€, Recent Advances in Electrical and Electronic Engineering (Bentham Science Publications), Volume 12, Issue 1, pp.50-60, 2019. https://doi.org/10.2174/2352096511666180411150820
Deepak Kumar Lal, and Ajit Kumar Barisal, "Grasshopper algorithm optimized fractional order fuzzy PID frequency controller for hybrid power systems", Recent Advances in Electrical and Electronic Engineering (Bentham Science Publications), Volume 12, Issue 6, pp.517 - 529, 2019. https://doi.org/10.2174/2352096511666180717142058
Debasmita Pani, Punyapriya Mishra, Study of mechanical properties of natural fiber reinforced hybrid polymer composites, International journal of Advanced Mechanical Engineering, 9(1), 1-6
Punyapriya Mishra, Narasingh Deep, Sagarika Pradhan, Vikram G Kamble “Effect of functionalized MWCNT on the mechanical and dielectric properties of PMMA nano composites”, International Journal of Nano Science, 18 (6), 1850035-304
Sasmita Behera, S.K. Behera and B.B. Pati,(2019) “Control of DFIG for WECS under disturbances from GRID”, Proceedings of Engineering and Technology Innovation(PETI), Vol.13, pp.10-19, 2019.
Rosy Pradhan, Santosh Kumar Majhi, Bibhuti BhusanPati,(2019) Design of Fractional Order PID Controller for Heat Flow System using Hybrid Particle Swarm Optimization and Gravitational Search Algorithm, International Journal of Computational Intelligence Studies, Inderscience, Vol. 8(1/2), January 2019. DOI:10.1504/IJCISTUDIES.2019.098016
Rosy Pradhan and B. B. Pati (2019), "Comparative Performance Evaluation of FOPID controller for Heat Flow System using Evolutionary Algorithm." International Journal of meta-heuristic computing. Vo.10(4), 2019, pp.68-90 DOI:10.4018/IJAMC.201910010.
Panda, A., Das, S. R., Dhupal, D., & Davim, J. P. (2018). Hard turning of HSLA steel with coated ceramic tool based on evaluation of surface roughness, tool wear, chip morphology and economic analysis. Journal of Manufacturing Technology Research, 10(3–4), 113–141.
Dhupal, D., Dixit, S. R., & Das, S. R. (2018). Optimization of process parameters in laser microgrooving of alumina ceramic using genetic algorithm. UPB Scientific Bulletin, Series D: Mechanical Engineering, 80(4), 163–178.
Anand, A., Behera, A. K., & Das, S. R. (2018). Economic machining of hardened steels by hard turning and its process variables. International Journal of Engineering and Technology, 7, 320–325.
Panda, A., Das, S. R., & Dhupal, D. (2018). Experimental investigation, modelling and optimization in hard turning of high strength low alloy steel (AISI 4340). Matériaux & Techniques, 106(4), 404.
Panda, A., Das, S. R., Dhupal, D., & Davim, J. P. (2018). Hard turning of HSLA steel with coated ceramic tool based on evaluation of surface roughness, tool wear, chip morphology and economic analysis. Journal of Manufacturing Technology Research, 10(3–4), 113–141.
Dhupal, D., Dixit, S. R., & Das, S. R. (2018). Optimization of process parameters in laser microgrooving of alumina ceramic using genetic algorithm. UPB Scientific Bulletin, Series D: Mechanical Engineering, 80(4), 163–178.
Anand, A., Behera, A. K., & Das, S. R. (2018). Economic machining of hardened steels by hard turning and its process variables. International Journal of Engineering and Technology, 7, 320–325.
Panda, A., Das, S. R., & Dhupal, D. (2018). Experimental investigation, modelling and optimization in hard turning of high strength low alloy steel (AISI 4340). Matériaux & Techniques, 106(4), 404.
Panda, A., Das, S. R., Dhupal, D., & Davim, J. P. (2018). Hard turning of HSLA steel with coated ceramic tool based on evaluation of surface roughness, tool wear, chip morphology and economic analysis. Journal of Manufacturing Technology Research, 10(3–4), 113–141.
Dhupal, D., Dixit, S. R., & Das, S. R. (2018). Optimization of process parameters in laser microgrooving of alumina ceramic using genetic algorithm. UPB Scientific Bulletin, Series D: Mechanical Engineering, 80(4), 163–178.
Anand, A., Behera, A. K., & Das, S. R. (2018). Economic machining of hardened steels by hard turning and its process variables. International Journal of Engineering and Technology, 7, 320–325.
Panda, A., Das, S. R., & Dhupal, D. (2018). Experimental investigation, modelling and optimization in hard turning of high strength low alloy steel (AISI 4340). Matériaux & Techniques, 106(4), 404.
Panda, A., Das, S. R., Dhupal, D., & Davim, J. P. (2018). Hard turning of HSLA steel with coated ceramic tool based on evaluation of surface roughness, tool wear, chip morphology and economic analysis. Journal of Manufacturing Technology Research, 10(3–4), 113–141.
Dhupal, D., Dixit, S. R., & Das, S. R. (2018). Optimization of process parameters in laser microgrooving of alumina ceramic using genetic algorithm. UPB Scientific Bulletin, Series D: Mechanical Engineering, 80(4), 163–178.
Anand, A., Behera, A. K., & Das, S. R. (2018). Economic machining of hardened steels by hard turning and its process variables. International Journal of Engineering and Technology, 7, 320–325.
Panda, A., Das, S. R., & Dhupal, D. (2018). Experimental investigation, modelling and optimization in hard turning of high strength low alloy steel (AISI 4340). Matériaux & Techniques, 106(4), 404.
Panda, A., Das, S. R., Dhupal, D., & Davim, J. P. (2018). Hard turning of HSLA steel with coated ceramic tool based on evaluation of surface roughness, tool wear, chip morphology and economic analysis. Journal of Manufacturing Technology Research, 10(3–4), 113–141.
Dhupal, D., Dixit, S. R., & Das, S. R. (2018). Optimization of process parameters in laser microgrooving of alumina ceramic using genetic algorithm. UPB Scientific Bulletin, Series D: Mechanical Engineering, 80(4), 163–178.
Anand, A., Behera, A. K., & Das, S. R. (2018). Economic machining of hardened steels by hard turning and its process variables. International Journal of Engineering and Technology, 7, 320–325.
Panda, A., Das, S. R., & Dhupal, D. (2018). Experimental investigation, modelling and optimization in hard turning of high strength low alloy steel (AISI 4340). Matériaux & Techniques, 106(4), 404.
Panda, A., Das, S. R., Dhupal, D., & Davim, J. P. (2018). Hard turning of HSLA steel with coated ceramic tool based on evaluation of surface roughness, tool wear, chip morphology and economic analysis. Journal of Manufacturing Technology Research, 10(3–4), 113–141.
Dhupal, D., Dixit, S. R., & Das, S. R. (2018). Optimization of process parameters in laser microgrooving of alumina ceramic using genetic algorithm. UPB Scientific Bulletin, Series D: Mechanical Engineering, 80(4), 163–178.
Anand, A., Behera, A. K., & Das, S. R. (2018). Economic machining of hardened steels by hard turning and its process variables. International Journal of Engineering and Technology, 7, 320–325.
Panda, A., Das, S. R., & Dhupal, D. (2018). Experimental investigation, modelling and optimization in hard turning of high strength low alloy steel (AISI 4340). Matériaux & Techniques, 106(4), 404.
Panda, A., Das, S. R., Dhupal, D., & Davim, J. P. (2018). Hard turning of HSLA steel with coated ceramic tool based on evaluation of surface roughness, tool wear, chip morphology and economic analysis. Journal of Manufacturing Technology Research, 10(3–4), 113–141.
Dhupal, D., Dixit, S. R., & Das, S. R. (2018). Optimization of process parameters in laser microgrooving of alumina ceramic using genetic algorithm. UPB Scientific Bulletin, Series D: Mechanical Engineering, 80(4), 163–178.
Anand, A., Behera, A. K., & Das, S. R. (2018). Economic machining of hardened steels by hard turning and its process variables. International Journal of Engineering and Technology, 7, 320–325.
Panda, A., Das, S. R., & Dhupal, D. (2018). Experimental investigation, modelling and optimization in hard turning of high strength low alloy steel (AISI 4340). Matériaux & Techniques, 106(4), 404.
Panda, A., Das, S. R., Dhupal, D., & Davim, J. P. (2018). Hard turning of HSLA steel with coated ceramic tool based on evaluation of surface roughness, tool wear, chip morphology and economic analysis. Journal of Manufacturing Technology Research, 10(3–4), 113–141.
Dhupal, D., Dixit, S. R., & Das, S. R. (2018). Optimization of process parameters in laser microgrooving of alumina ceramic using genetic algorithm. UPB Scientific Bulletin, Series D: Mechanical Engineering, 80(4), 163–178.
Anand, A., Behera, A. K., & Das, S. R. (2018). Economic machining of hardened steels by hard turning and its process variables. International Journal of Engineering and Technology, 7, 320–325.
Panda, A., Das, S. R., & Dhupal, D. (2018). Experimental investigation, modelling and optimization in hard turning of high strength low alloy steel (AISI 4340). Matériaux & Techniques, 106(4), 404.
Panda, A., Das, S. R., Dhupal, D., & Davim, J. P. (2018). Hard turning of HSLA steel with coated ceramic tool based on evaluation of surface roughness, tool wear, chip morphology and economic analysis. Journal of Manufacturing Technology Research, 10(3–4), 113–141.
Dhupal, D., Dixit, S. R., & Das, S. R. (2018). Optimization of process parameters in laser microgrooving of alumina ceramic using genetic algorithm. UPB Scientific Bulletin, Series D: Mechanical Engineering, 80(4), 163–178.
Anand, A., Behera, A. K., & Das, S. R. (2018). Economic machining of hardened steels by hard turning and its process variables. International Journal of Engineering and Technology, 7, 320–325.
Panda, A., Das, S. R., & Dhupal, D. (2018). Experimental investigation, modelling and optimization in hard turning of high strength low alloy steel (AISI 4340). Matériaux & Techniques, 106(4), 404.
Panda, A., Das, S. R., Dhupal, D., & Davim, J. P. (2018). Hard turning of HSLA steel with coated ceramic tool based on evaluation of surface roughness, tool wear, chip morphology and economic analysis. Journal of Manufacturing Technology Research, 10(3–4), 113–141.
Dhupal, D., Dixit, S. R., & Das, S. R. (2018). Optimization of process parameters in laser microgrooving of alumina ceramic using genetic algorithm. UPB Scientific Bulletin, Series D: Mechanical Engineering, 80(4), 163–178.
Anand, A., Behera, A. K., & Das, S. R. (2018). Economic machining of hardened steels by hard turning and its process variables. International Journal of Engineering and Technology, 7, 320–325.
Panda, A., Das, S. R., & Dhupal, D. (2018). Experimental investigation, modelling and optimization in hard turning of high strength low alloy steel (AISI 4340). Matériaux & Techniques, 106(4), 404.
Panda, A., Das, S. R., Dhupal, D., & Davim, J. P. (2018). Hard turning of HSLA steel with coated ceramic tool based on evaluation of surface roughness, tool wear, chip morphology and economic analysis. Journal of Manufacturing Technology Research, 10(3–4), 113–141.
Dhupal, D., Dixit, S. R., & Das, S. R. (2018). Optimization of process parameters in laser microgrooving of alumina ceramic using genetic algorithm. UPB Scientific Bulletin, Series D: Mechanical Engineering, 80(4), 163–178.
Anand, A., Behera, A. K., & Das, S. R. (2018). Economic machining of hardened steels by hard turning and its process variables. International Journal of Engineering and Technology, 7, 320–325.
Panda, A., Das, S. R., & Dhupal, D. (2018). Experimental investigation, modelling and optimization in hard turning of high strength low alloy steel (AISI 4340). Matériaux & Techniques, 106(4), 404.
Panda, A., Das, S. R., Dhupal, D., & Davim, J. P. (2018). Hard turning of HSLA steel with coated ceramic tool based on evaluation of surface roughness, tool wear, chip morphology and economic analysis. Journal of Manufacturing Technology Research, 10(3–4), 113–141.
Dhupal, D., Dixit, S. R., & Das, S. R. (2018). Optimization of process parameters in laser microgrooving of alumina ceramic using genetic algorithm. UPB Scientific Bulletin, Series D: Mechanical Engineering, 80(4), 163–178.
Anand, A., Behera, A. K., & Das, S. R. (2018). Economic machining of hardened steels by hard turning and its process variables. International Journal of Engineering and Technology, 7, 320–325.
Panda, A., Das, S. R., & Dhupal, D. (2018). Experimental investigation, modelling and optimization in hard turning of high strength low alloy steel (AISI 4340). Matériaux & Techniques, 106(4), 404.
Narasingh Deep, Punyapriya Mishra “Fabrication and characterization of thermally conductive PMMA/MWCNT nanocomposites”, Materials Today Proceedings, 5(14), 28328-28336
Debasmita Pani, Punyapriya Mishra, Tribological behavior of sponge gourd based hybrid reinforced polymer composite, International Journal of Advanced Mechanical Engineering, 8(1), Special edition, 89-96
S N Panda, S.Panda, D.S.Khamari, P.Mishra, “Re-examination for effect of ball race conformity on life of Rolling Element bearing using Metaheuristic, International Journal of Advanced Mechanical Engineering, 8 (1) 285-294
Narasingh Deep, Punyapriya Mishra, “Evaluation of mechanical properties of functionalized carbon nano tube reinforced PMMA polymer nanocomposite”, Karbala International Journal of Modern Science, 4(2), 207-215
Tanushree Bera, S.K.Acharya, Punyapriya Mishra “Synthesis, mechanical, thermal Properties of carbon black/epoxy composites”, International Journal of Engineering, Science and Technology, 10 (4), 12-20
Panda, A., Das, S. R., Dhupal, D., & Davim, J. P. (2018). Hard turning of HSLA steel with coated ceramic tool based on evaluation of surface roughness, tool wear, chip morphology and economic analysis. Journal of Manufacturing Technology Research, 10(3–4), 113–141.
Dhupal, D., Dixit, S. R., & Das, S. R. (2018). Optimization of process parameters in laser microgrooving of alumina ceramic using genetic algorithm. UPB Scientific Bulletin, Series D: Mechanical Engineering, 80(4), 163–178.
Anand, A., Behera, A. K., & Das, S. R. (2018). Economic machining of hardened steels by hard turning and its process variables. International Journal of Engineering and Technology, 7, 320–325.
Panda, A., Das, S. R., & Dhupal, D. (2018). Experimental investigation, modelling and optimization in hard turning of high strength low alloy steel (AISI 4340). Matériaux & Techniques, 106(4), 404.
Panda, A., Das, S. R., Dhupal, D., & Davim, J. P. (2018). Hard turning of HSLA steel with coated ceramic tool based on evaluation of surface roughness, tool wear, chip morphology and economic analysis. Journal of Manufacturing Technology Research, 10(3–4), 113–141.
Dhupal, D., Dixit, S. R., & Das, S. R. (2018). Optimization of process parameters in laser microgrooving of alumina ceramic using genetic algorithm. UPB Scientific Bulletin, Series D: Mechanical Engineering, 80(4), 163–178.
Anand, A., Behera, A. K., & Das, S. R. (2018). Economic machining of hardened steels by hard turning and its process variables. International Journal of Engineering and Technology, 7, 320–325.
Panda, A., Das, S. R., & Dhupal, D. (2018). Experimental investigation, modelling and optimization in hard turning of high strength low alloy steel (AISI 4340). Matériaux & Techniques, 106(4), 404.
86. Panda, A., Das, S. R., Dhupal, D., & Davim, J. P. (2018). Hard turning of HSLA steel with coated ceramic tool based on evaluation of surface roughness, tool wear, chip morphology and economic analysis. Journal of Manufacturing Technology Research, 10(3–4), 113–141.
87. Dhupal, D., Dixit, S. R., & Das, S. R. (2018). Optimization of process parameters in laser microgrooving of alumina ceramic using genetic algorithm. UPB Scientific Bulletin, Series D: Mechanical Engineering, 80(4), 163–178.
88. Anand, A., Behera, A. K., & Das, S. R. (2018). Economic machining of hardened steels by hard turning and its process variables. International Journal of Engineering and Technology, 7, 320–325.
89. Panda, A., Das, S. R., & Dhupal, D. (2018). Experimental investigation, modelling and optimization in hard turning of high strength low alloy steel (AISI 4340). Matériaux & Techniques, 106(4), 404.
K. Prusty, P. K. Sethy and S. K. Swain* “Sandwich structured starch grafted polyethylhexylacrylate/polyvinylalcohol thin films” Advances in Polymer Technology, 37, 37739-37791, (Wiley), (2018). (Impact Factor: 2.5) ISSN: 1098-2329. DOI: https://doi.org/10.1002/adv.22161
K. Prusty and S. K. Swain* “Nano silver decorated polyacrylamide/dextran nanohydrogels hybrid composites for drug delivery applications” Materials Science & Engineering: C, 85, 130-141, (Elsevier), (2018). (Impact Factor: 7.53) ISSN: 0928-4931. DOI: https://doi.org/10.1016/j.msec.2017.11.028
K. Prustyand S. K. Swain* “Nanostructured chitosan composites for cancer therapy: a review” International Journal of Polymeric Materials and Polymeric Biomaterials, 67(15), 879-888, (Tylor & Francis), (2018). (Impact Factor:3.81)ISSN: 1563-535X. DOI: https://doi.org/10.1080/00914037.2017.1393678
S. K. Swain*, S. Barik, G. C. Pradhan and L. Behera “Delamination of Mg-Al layered double hydroxide on starch: change in structural and thermal properties” Polymer-Plastics Technology and Engineering, 57(15), 1585-1591, (Tylor & Francis), (2018). (Impact Factor: 3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2017.1410844
N. Sarkar, G. Sahoo, R. Das and S. K. Swain* “Three-dimensional rice straw structured magnetic nanoclay decorated tri-polymeric nanohydrogels as superabsorbent of dye pollutants”ACS Applied Nano Materials, 1, 1183-1203, (American Chemical Society), (2018). (Impact Factor: 5.6)ISSN: 2574-0970. DOI: https://doi.org/10.1021/acsanm.7b00358
S. Gantayat, N. Sarkar, G. Prusty, D. Rout and S. K. Swain* “Designing of epoxy matrix by chemically modified multiwalled carbon nanotubes” Advances in Polymer Technology, 37, 21654-21662, (Wiley), (2018). (Impact Factor: 3.1) ISSN: 1098-2329. DOI: https://doi.org/10.1002/adv. 21654
S. K. Swain* and K. Prusty “Biomedical applications of acrylic based nanohydrogels: a review” Journal of Materials Science, 53, 2303-2325, (Springer), (2018). (Impact Factor: 3.9) ISSN: 0022-2461. DOI: https://doi.org/10.1007/s10853-017-1726-x
S. Gantayat, D. Rout, S. K. Swain* “Carbon nanomaterial-reinforced epoxy composites: a review”Polymer-Plastic Technology and Engineering, 57(1), 1-16, (Tylor & Francis), (2018). (Impact Factor:3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2017.1298802
G. Sahoo, N. Sarkar and S. K. Swain* “The effect of reduced graphene oxide intercalated hybrid organoclay on the dielectric properties of polyvinylidene fluoride nanocomposite films” Applied Clay Science, 162, 69-82, (Elsevier), (2018). (Impact Factor: 5.8) ISSN: 0169-1317. DOI: https://doi.org/10.1016/j.clay.2018.05.008
K. Prusty and S. K. Swain* "h-BN huddled starch reinforced polyethylhexylacrylatepolyvinyl alcohol thin films for packaging applications" Polymer Composites, 40(05), 1810-1818, (Wiley), (2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.24941
K. Prusty, P. K. Sethy and S. K. Swain* “Sandwich structured starch grafted polyethylhexylacrylate/polyvinylalcohol thin films” Advances in Polymer Technology, 37, 37739-37791, (Wiley), (2018). (Impact Factor: 2.5) ISSN: 1098-2329. DOI: https://doi.org/10.1002/adv.22161
K. Prusty and S. K. Swain* “Nano silver decorated polyacrylamide/dextran nanohydrogels hybrid composites for drug delivery applications” Materials Science & Engineering: C, 85, 130-141, (Elsevier), (2018). (Impact Factor: 7.53) ISSN: 0928-4931. DOI: https://doi.org/10.1016/j.msec.2017.11.028
K. Prustyand S. K. Swain* “Nanostructured chitosan composites for cancer therapy: a review” International Journal of Polymeric Materials and Polymeric Biomaterials, 67(15), 879-888, (Tylor & Francis), (2018). (Impact Factor:3.81)ISSN: 1563-535X. DOI: https://doi.org/10.1080/00914037.2017.1393678
S. K. Swain*, S. Barik, G. C. Pradhan and L. Behera “Delamination of Mg-Al layered double hydroxide on starch: change in structural and thermal properties” Polymer-Plastics Technology and Engineering, 57(15), 1585-1591, (Tylor & Francis), (2018). (Impact Factor: 3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2017.1410844
N. Sarkar, G. Sahoo, R. Das and S. K. Swain* “Three-dimensional rice straw structured magnetic nanoclay decorated tri-polymeric nanohydrogels as superabsorbent of dye pollutants”ACS Applied Nano Materials, 1, 1183-1203, (American Chemical Society), (2018). (Impact Factor: 5.6)ISSN: 2574-0970. DOI: https://doi.org/10.1021/acsanm.7b00358
S. Gantayat, N. Sarkar, G. Prusty, D. Rout and S. K. Swain* “Designing of epoxy matrix by chemically modified multiwalled carbon nanotubes” Advances in Polymer Technology, 37, 21654-21662, (Wiley), (2018). (Impact Factor: 3.1) ISSN: 1098-2329. DOI: https://doi.org/10.1002/adv. 21654
S. K. Swain* and K. Prusty “Biomedical applications of acrylic based nanohydrogels: a review” Journal of Materials Science, 53, 2303-2325, (Springer), (2018). (Impact Factor: 3.9) ISSN: 0022-2461. DOI: https://doi.org/10.1007/s10853-017-1726-x
S. Gantayat, D. Rout, S. K. Swain* “Carbon nanomaterial-reinforced epoxy composites: a review”Polymer-Plastic Technology and Engineering, 57(1), 1-16, (Tylor & Francis), (2018). (Impact Factor:3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2017.1298802
G. Sahoo, N. Sarkar and S. K. Swain* “The effect of reduced graphene oxide intercalated hybrid organoclay on the dielectric properties of polyvinylidene fluoride nanocomposite films” Applied Clay Science, 162, 69-82, (Elsevier), (2018). (Impact Factor: 5.8) ISSN: 0169-1317. DOI: https://doi.org/10.1016/j.clay.2018.05.008
K. Prusty and S. K. Swain* "h-BN huddled starch reinforced polyethylhexylacrylatepolyvinyl alcohol thin films for packaging applications" Polymer Composites, 40(05), 1810-1818, (Wiley), (2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.24941
K. Prusty, P. K. Sethy and S. K. Swain* “Sandwich structured starch grafted polyethylhexylacrylate/polyvinylalcohol thin films” Advances in Polymer Technology, 37, 37739-37791, (Wiley), (2018). (Impact Factor: 2.5) ISSN: 1098-2329. DOI: https://doi.org/10.1002/adv.22161
K. Prusty and S. K. Swain* “Nano silver decorated polyacrylamide/dextran nanohydrogels hybrid composites for drug delivery applications” Materials Science & Engineering: C, 85, 130-141, (Elsevier), (2018). (Impact Factor: 7.53) ISSN: 0928-4931. DOI: https://doi.org/10.1016/j.msec.2017.11.028
K. Prustyand S. K. Swain* “Nanostructured chitosan composites for cancer therapy: a review” International Journal of Polymeric Materials and Polymeric Biomaterials, 67(15), 879-888, (Tylor & Francis), (2018). (Impact Factor:3.81)ISSN: 1563-535X. DOI: https://doi.org/10.1080/00914037.2017.1393678
S. K. Swain*, S. Barik, G. C. Pradhan and L. Behera “Delamination of Mg-Al layered double hydroxide on starch: change in structural and thermal properties” Polymer-Plastics Technology and Engineering, 57(15), 1585-1591, (Tylor & Francis), (2018). (Impact Factor: 3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2017.1410844
N. Sarkar, G. Sahoo, R. Das and S. K. Swain* “Three-dimensional rice straw structured magnetic nanoclay decorated tri-polymeric nanohydrogels as superabsorbent of dye pollutants”ACS Applied Nano Materials, 1, 1183-1203, (American Chemical Society), (2018). (Impact Factor: 5.6)ISSN: 2574-0970. DOI: https://doi.org/10.1021/acsanm.7b00358
S. Gantayat, N. Sarkar, G. Prusty, D. Rout and S. K. Swain* “Designing of epoxy matrix by chemically modified multiwalled carbon nanotubes” Advances in Polymer Technology, 37, 21654-21662, (Wiley), (2018). (Impact Factor: 3.1) ISSN: 1098-2329. DOI: https://doi.org/10.1002/adv. 21654
S. K. Swain* and K. Prusty “Biomedical applications of acrylic based nanohydrogels: a review” Journal of Materials Science, 53, 2303-2325, (Springer), (2018). (Impact Factor: 3.9) ISSN: 0022-2461. DOI: https://doi.org/10.1007/s10853-017-1726-x
S. Gantayat, D. Rout, S. K. Swain* “Carbon nanomaterial-reinforced epoxy composites: a review”Polymer-Plastic Technology and Engineering, 57(1), 1-16, (Tylor & Francis), (2018). (Impact Factor:3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2017.1298802
G. Sahoo, N. Sarkar and S. K. Swain* “The effect of reduced graphene oxide intercalated hybrid organoclay on the dielectric properties of polyvinylidene fluoride nanocomposite films” Applied Clay Science, 162, 69-82, (Elsevier), (2018). (Impact Factor: 5.8) ISSN: 0169-1317. DOI: https://doi.org/10.1016/j.clay.2018.05.008
K. Prusty and S. K. Swain* "h-BN huddled starch reinforced polyethylhexylacrylatepolyvinyl alcohol thin films for packaging applications" Polymer Composites, 40(05), 1810-1818, (Wiley), (2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.24941
K. Prusty, P. K. Sethy and S. K. Swain* “Sandwich structured starch grafted polyethylhexylacrylate/polyvinylalcohol thin films” Advances in Polymer Technology, 37, 37739-37791, (Wiley), (2018). (Impact Factor: 2.5) ISSN: 1098-2329. DOI: https://doi.org/10.1002/adv.22161
K. Prusty and S. K. Swain* “Nano silver decorated polyacrylamide/dextran nanohydrogels hybrid composites for drug delivery applications” Materials Science & Engineering: C, 85, 130-141, (Elsevier), (2018). (Impact Factor: 7.53) ISSN: 0928-4931. DOI: https://doi.org/10.1016/j.msec.2017.11.028
K. Prustyand S. K. Swain* “Nanostructured chitosan composites for cancer therapy: a review” International Journal of Polymeric Materials and Polymeric Biomaterials, 67(15), 879-888, (Tylor & Francis), (2018). (Impact Factor:3.81)ISSN: 1563-535X. DOI: https://doi.org/10.1080/00914037.2017.1393678
S. K. Swain*, S. Barik, G. C. Pradhan and L. Behera “Delamination of Mg-Al layered double hydroxide on starch: change in structural and thermal properties” Polymer-Plastics Technology and Engineering, 57(15), 1585-1591, (Tylor & Francis), (2018). (Impact Factor: 3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2017.1410844
N. Sarkar, G. Sahoo, R. Das and S. K. Swain* “Three-dimensional rice straw structured magnetic nanoclay decorated tri-polymeric nanohydrogels as superabsorbent of dye pollutants”ACS Applied Nano Materials, 1, 1183-1203, (American Chemical Society), (2018). (Impact Factor: 5.6)ISSN: 2574-0970. DOI: https://doi.org/10.1021/acsanm.7b00358
S. Gantayat, N. Sarkar, G. Prusty, D. Rout and S. K. Swain* “Designing of epoxy matrix by chemically modified multiwalled carbon nanotubes” Advances in Polymer Technology, 37, 21654-21662, (Wiley), (2018). (Impact Factor: 3.1) ISSN: 1098-2329. DOI: https://doi.org/10.1002/adv. 21654
S. K. Swain* and K. Prusty “Biomedical applications of acrylic based nanohydrogels: a review” Journal of Materials Science, 53, 2303-2325, (Springer), (2018). (Impact Factor: 3.9) ISSN: 0022-2461. DOI: https://doi.org/10.1007/s10853-017-1726-x
S. Gantayat, D. Rout, S. K. Swain* “Carbon nanomaterial-reinforced epoxy composites: a review”Polymer-Plastic Technology and Engineering, 57(1), 1-16, (Tylor & Francis), (2018). (Impact Factor:3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2017.1298802
G. Sahoo, N. Sarkar and S. K. Swain* “The effect of reduced graphene oxide intercalated hybrid organoclay on the dielectric properties of polyvinylidene fluoride nanocomposite films” Applied Clay Science, 162, 69-82, (Elsevier), (2018). (Impact Factor: 5.8) ISSN: 0169-1317. DOI: https://doi.org/10.1016/j.clay.2018.05.008
K. Prusty and S. K. Swain* "h-BN huddled starch reinforced polyethylhexylacrylatepolyvinyl alcohol thin films for packaging applications" Polymer Composites, 40(05), 1810-1818, (Wiley), (2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.24941
K. Prusty, P. K. Sethy and S. K. Swain* “Sandwich structured starch grafted polyethylhexylacrylate/polyvinylalcohol thin films” Advances in Polymer Technology, 37, 37739-37791, (Wiley), (2018). (Impact Factor: 2.5) ISSN: 1098-2329. DOI: https://doi.org/10.1002/adv.22161
K. Prusty and S. K. Swain* “Nano silver decorated polyacrylamide/dextran nanohydrogels hybrid composites for drug delivery applications” Materials Science & Engineering: C, 85, 130-141, (Elsevier), (2018). (Impact Factor: 7.53) ISSN: 0928-4931. DOI: https://doi.org/10.1016/j.msec.2017.11.028
K. Prustyand S. K. Swain* “Nanostructured chitosan composites for cancer therapy: a review” International Journal of Polymeric Materials and Polymeric Biomaterials, 67(15), 879-888, (Tylor & Francis), (2018). (Impact Factor:3.81)ISSN: 1563-535X. DOI: https://doi.org/10.1080/00914037.2017.1393678
S. K. Swain*, S. Barik, G. C. Pradhan and L. Behera “Delamination of Mg-Al layered double hydroxide on starch: change in structural and thermal properties” Polymer-Plastics Technology and Engineering, 57(15), 1585-1591, (Tylor & Francis), (2018). (Impact Factor: 3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2017.1410844
N. Sarkar, G. Sahoo, R. Das and S. K. Swain* “Three-dimensional rice straw structured magnetic nanoclay decorated tri-polymeric nanohydrogels as superabsorbent of dye pollutants”ACS Applied Nano Materials, 1, 1183-1203, (American Chemical Society), (2018). (Impact Factor: 5.6)ISSN: 2574-0970. DOI: https://doi.org/10.1021/acsanm.7b00358
S. Gantayat, N. Sarkar, G. Prusty, D. Rout and S. K. Swain* “Designing of epoxy matrix by chemically modified multiwalled carbon nanotubes” Advances in Polymer Technology, 37, 21654-21662, (Wiley), (2018). (Impact Factor: 3.1) ISSN: 1098-2329. DOI: https://doi.org/10.1002/adv. 21654
S. K. Swain* and K. Prusty “Biomedical applications of acrylic based nanohydrogels: a review” Journal of Materials Science, 53, 2303-2325, (Springer), (2018). (Impact Factor: 3.9) ISSN: 0022-2461. DOI: https://doi.org/10.1007/s10853-017-1726-x
S. Gantayat, D. Rout, S. K. Swain* “Carbon nanomaterial-reinforced epoxy composites: a review”Polymer-Plastic Technology and Engineering, 57(1), 1-16, (Tylor & Francis), (2018). (Impact Factor:3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2017.1298802
G. Sahoo, N. Sarkar and S. K. Swain* “The effect of reduced graphene oxide intercalated hybrid organoclay on the dielectric properties of polyvinylidene fluoride nanocomposite films” Applied Clay Science, 162, 69-82, (Elsevier), (2018). (Impact Factor: 5.8) ISSN: 0169-1317. DOI: https://doi.org/10.1016/j.clay.2018.05.008
K. Prusty and S. K. Swain* "h-BN huddled starch reinforced polyethylhexylacrylatepolyvinyl alcohol thin films for packaging applications" Polymer Composites, 40(05), 1810-1818, (Wiley), (2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.24941
K. Prusty, P. K. Sethy and S. K. Swain* “Sandwich structured starch grafted polyethylhexylacrylate/polyvinylalcohol thin films” Advances in Polymer Technology, 37, 37739-37791, (Wiley), (2018). (Impact Factor: 2.5) ISSN: 1098-2329. DOI: https://doi.org/10.1002/adv.22161
K. Prusty and S. K. Swain* “Nano silver decorated polyacrylamide/dextran nanohydrogels hybrid composites for drug delivery applications” Materials Science & Engineering: C, 85, 130-141, (Elsevier), (2018). (Impact Factor: 7.53) ISSN: 0928-4931. DOI: https://doi.org/10.1016/j.msec.2017.11.028
K. Prustyand S. K. Swain* “Nanostructured chitosan composites for cancer therapy: a review” International Journal of Polymeric Materials and Polymeric Biomaterials, 67(15), 879-888, (Tylor & Francis), (2018). (Impact Factor:3.81)ISSN: 1563-535X. DOI: https://doi.org/10.1080/00914037.2017.1393678
S. K. Swain*, S. Barik, G. C. Pradhan and L. Behera “Delamination of Mg-Al layered double hydroxide on starch: change in structural and thermal properties” Polymer-Plastics Technology and Engineering, 57(15), 1585-1591, (Tylor & Francis), (2018). (Impact Factor: 3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2017.1410844
N. Sarkar, G. Sahoo, R. Das and S. K. Swain* “Three-dimensional rice straw structured magnetic nanoclay decorated tri-polymeric nanohydrogels as superabsorbent of dye pollutants”ACS Applied Nano Materials, 1, 1183-1203, (American Chemical Society), (2018). (Impact Factor: 5.6)ISSN: 2574-0970. DOI: https://doi.org/10.1021/acsanm.7b00358
S. Gantayat, N. Sarkar, G. Prusty, D. Rout and S. K. Swain* “Designing of epoxy matrix by chemically modified multiwalled carbon nanotubes” Advances in Polymer Technology, 37, 21654-21662, (Wiley), (2018). (Impact Factor: 3.1) ISSN: 1098-2329. DOI: https://doi.org/10.1002/adv. 21654
S. K. Swain* and K. Prusty “Biomedical applications of acrylic based nanohydrogels: a review” Journal of Materials Science, 53, 2303-2325, (Springer), (2018). (Impact Factor: 3.9) ISSN: 0022-2461. DOI: https://doi.org/10.1007/s10853-017-1726-x
S. Gantayat, D. Rout, S. K. Swain* “Carbon nanomaterial-reinforced epoxy composites: a review”Polymer-Plastic Technology and Engineering, 57(1), 1-16, (Tylor & Francis), (2018). (Impact Factor:3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2017.1298802
G. Sahoo, N. Sarkar and S. K. Swain* “The effect of reduced graphene oxide intercalated hybrid organoclay on the dielectric properties of polyvinylidene fluoride nanocomposite films” Applied Clay Science, 162, 69-82, (Elsevier), (2018). (Impact Factor: 5.8) ISSN: 0169-1317. DOI: https://doi.org/10.1016/j.clay.2018.05.008
K. Prusty and S. K. Swain* "h-BN huddled starch reinforced polyethylhexylacrylatepolyvinyl alcohol thin films for packaging applications" Polymer Composites, 40(05), 1810-1818, (Wiley), (2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.24941
K. Prusty, P. K. Sethy and S. K. Swain* “Sandwich structured starch grafted polyethylhexylacrylate/polyvinylalcohol thin films” Advances in Polymer Technology, 37, 37739-37791, (Wiley), (2018). (Impact Factor: 2.5) ISSN: 1098-2329. DOI: https://doi.org/10.1002/adv.22161
K. Prusty and S. K. Swain* “Nano silver decorated polyacrylamide/dextran nanohydrogels hybrid composites for drug delivery applications” Materials Science & Engineering: C, 85, 130-141, (Elsevier), (2018). (Impact Factor: 7.53) ISSN: 0928-4931. DOI: https://doi.org/10.1016/j.msec.2017.11.028
K. Prustyand S. K. Swain* “Nanostructured chitosan composites for cancer therapy: a review” International Journal of Polymeric Materials and Polymeric Biomaterials, 67(15), 879-888, (Tylor & Francis), (2018). (Impact Factor:3.81)ISSN: 1563-535X. DOI: https://doi.org/10.1080/00914037.2017.1393678
S. K. Swain*, S. Barik, G. C. Pradhan and L. Behera “Delamination of Mg-Al layered double hydroxide on starch: change in structural and thermal properties” Polymer-Plastics Technology and Engineering, 57(15), 1585-1591, (Tylor & Francis), (2018). (Impact Factor: 3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2017.1410844
N. Sarkar, G. Sahoo, R. Das and S. K. Swain* “Three-dimensional rice straw structured magnetic nanoclay decorated tri-polymeric nanohydrogels as superabsorbent of dye pollutants”ACS Applied Nano Materials, 1, 1183-1203, (American Chemical Society), (2018). (Impact Factor: 5.6)ISSN: 2574-0970. DOI: https://doi.org/10.1021/acsanm.7b00358
S. Gantayat, N. Sarkar, G. Prusty, D. Rout and S. K. Swain* “Designing of epoxy matrix by chemically modified multiwalled carbon nanotubes” Advances in Polymer Technology, 37, 21654-21662, (Wiley), (2018). (Impact Factor: 3.1) ISSN: 1098-2329. DOI: https://doi.org/10.1002/adv. 21654
S. K. Swain* and K. Prusty “Biomedical applications of acrylic based nanohydrogels: a review” Journal of Materials Science, 53, 2303-2325, (Springer), (2018). (Impact Factor: 3.9) ISSN: 0022-2461. DOI: https://doi.org/10.1007/s10853-017-1726-x
S. Gantayat, D. Rout, S. K. Swain* “Carbon nanomaterial-reinforced epoxy composites: a review”Polymer-Plastic Technology and Engineering, 57(1), 1-16, (Tylor & Francis), (2018). (Impact Factor:3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2017.1298802
G. Sahoo, N. Sarkar and S. K. Swain* “The effect of reduced graphene oxide intercalated hybrid organoclay on the dielectric properties of polyvinylidene fluoride nanocomposite films” Applied Clay Science, 162, 69-82, (Elsevier), (2018). (Impact Factor: 5.8) ISSN: 0169-1317. DOI: https://doi.org/10.1016/j.clay.2018.05.008
K. Prusty and S. K. Swain* "h-BN huddled starch reinforced polyethylhexylacrylatepolyvinyl alcohol thin films for packaging applications" Polymer Composites, 40(05), 1810-1818, (Wiley), (2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.24941
K. Prusty, P. K. Sethy and S. K. Swain* “Sandwich structured starch grafted polyethylhexylacrylate/polyvinylalcohol thin films” Advances in Polymer Technology, 37, 37739-37791, (Wiley), (2018). (Impact Factor: 2.5) ISSN: 1098-2329. DOI: https://doi.org/10.1002/adv.22161
K. Prusty and S. K. Swain* “Nano silver decorated polyacrylamide/dextran nanohydrogels hybrid composites for drug delivery applications” Materials Science & Engineering: C, 85, 130-141, (Elsevier), (2018). (Impact Factor: 7.53) ISSN: 0928-4931. DOI: https://doi.org/10.1016/j.msec.2017.11.028
K. Prustyand S. K. Swain* “Nanostructured chitosan composites for cancer therapy: a review” International Journal of Polymeric Materials and Polymeric Biomaterials, 67(15), 879-888, (Tylor & Francis), (2018). (Impact Factor:3.81)ISSN: 1563-535X. DOI: https://doi.org/10.1080/00914037.2017.1393678
S. K. Swain*, S. Barik, G. C. Pradhan and L. Behera “Delamination of Mg-Al layered double hydroxide on starch: change in structural and thermal properties” Polymer-Plastics Technology and Engineering, 57(15), 1585-1591, (Tylor & Francis), (2018). (Impact Factor: 3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2017.1410844
N. Sarkar, G. Sahoo, R. Das and S. K. Swain* “Three-dimensional rice straw structured magnetic nanoclay decorated tri-polymeric nanohydrogels as superabsorbent of dye pollutants”ACS Applied Nano Materials, 1, 1183-1203, (American Chemical Society), (2018). (Impact Factor: 5.6)ISSN: 2574-0970. DOI: https://doi.org/10.1021/acsanm.7b00358
S. Gantayat, N. Sarkar, G. Prusty, D. Rout and S. K. Swain* “Designing of epoxy matrix by chemically modified multiwalled carbon nanotubes” Advances in Polymer Technology, 37, 21654-21662, (Wiley), (2018). (Impact Factor: 3.1) ISSN: 1098-2329. DOI: https://doi.org/10.1002/adv. 21654
S. K. Swain* and K. Prusty “Biomedical applications of acrylic based nanohydrogels: a review” Journal of Materials Science, 53, 2303-2325, (Springer), (2018). (Impact Factor: 3.9) ISSN: 0022-2461. DOI: https://doi.org/10.1007/s10853-017-1726-x
S. Gantayat, D. Rout, S. K. Swain* “Carbon nanomaterial-reinforced epoxy composites: a review”Polymer-Plastic Technology and Engineering, 57(1), 1-16, (Tylor & Francis), (2018). (Impact Factor:3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2017.1298802
G. Sahoo, N. Sarkar and S. K. Swain* “The effect of reduced graphene oxide intercalated hybrid organoclay on the dielectric properties of polyvinylidene fluoride nanocomposite films” Applied Clay Science, 162, 69-82, (Elsevier), (2018). (Impact Factor: 5.8) ISSN: 0169-1317. DOI: https://doi.org/10.1016/j.clay.2018.05.008
K. Prusty and S. K. Swain* "h-BN huddled starch reinforced polyethylhexylacrylatepolyvinyl alcohol thin films for packaging applications" Polymer Composites, 40(05), 1810-1818, (Wiley), (2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.24941
K. Prusty, P. K. Sethy and S. K. Swain* “Sandwich structured starch grafted polyethylhexylacrylate/polyvinylalcohol thin films” Advances in Polymer Technology, 37, 37739-37791, (Wiley), (2018). (Impact Factor: 2.5) ISSN: 1098-2329. DOI: https://doi.org/10.1002/adv.22161
K. Prusty and S. K. Swain* “Nano silver decorated polyacrylamide/dextran nanohydrogels hybrid composites for drug delivery applications” Materials Science & Engineering: C, 85, 130-141, (Elsevier), (2018). (Impact Factor: 7.53) ISSN: 0928-4931. DOI: https://doi.org/10.1016/j.msec.2017.11.028
K. Prustyand S. K. Swain* “Nanostructured chitosan composites for cancer therapy: a review” International Journal of Polymeric Materials and Polymeric Biomaterials, 67(15), 879-888, (Tylor & Francis), (2018). (Impact Factor:3.81)ISSN: 1563-535X. DOI: https://doi.org/10.1080/00914037.2017.1393678
S. K. Swain*, S. Barik, G. C. Pradhan and L. Behera “Delamination of Mg-Al layered double hydroxide on starch: change in structural and thermal properties” Polymer-Plastics Technology and Engineering, 57(15), 1585-1591, (Tylor & Francis), (2018). (Impact Factor: 3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2017.1410844
N. Sarkar, G. Sahoo, R. Das and S. K. Swain* “Three-dimensional rice straw structured magnetic nanoclay decorated tri-polymeric nanohydrogels as superabsorbent of dye pollutants”ACS Applied Nano Materials, 1, 1183-1203, (American Chemical Society), (2018). (Impact Factor: 5.6)ISSN: 2574-0970. DOI: https://doi.org/10.1021/acsanm.7b00358
S. Gantayat, N. Sarkar, G. Prusty, D. Rout and S. K. Swain* “Designing of epoxy matrix by chemically modified multiwalled carbon nanotubes” Advances in Polymer Technology, 37, 21654-21662, (Wiley), (2018). (Impact Factor: 3.1) ISSN: 1098-2329. DOI: https://doi.org/10.1002/adv. 21654
S. K. Swain* and K. Prusty “Biomedical applications of acrylic based nanohydrogels: a review” Journal of Materials Science, 53, 2303-2325, (Springer), (2018). (Impact Factor: 3.9) ISSN: 0022-2461. DOI: https://doi.org/10.1007/s10853-017-1726-x
S. Gantayat, D. Rout, S. K. Swain* “Carbon nanomaterial-reinforced epoxy composites: a review”Polymer-Plastic Technology and Engineering, 57(1), 1-16, (Tylor & Francis), (2018). (Impact Factor:3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2017.1298802
G. Sahoo, N. Sarkar and S. K. Swain* “The effect of reduced graphene oxide intercalated hybrid organoclay on the dielectric properties of polyvinylidene fluoride nanocomposite films” Applied Clay Science, 162, 69-82, (Elsevier), (2018). (Impact Factor: 5.8) ISSN: 0169-1317. DOI: https://doi.org/10.1016/j.clay.2018.05.008
K. Prusty and S. K. Swain* "h-BN huddled starch reinforced polyethylhexylacrylatepolyvinyl alcohol thin films for packaging applications" Polymer Composites, 40(05), 1810-1818, (Wiley), (2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.24941
K. Prusty, P. K. Sethy and S. K. Swain* “Sandwich structured starch grafted polyethylhexylacrylate/polyvinylalcohol thin films” Advances in Polymer Technology, 37, 37739-37791, (Wiley), (2018). (Impact Factor: 2.5) ISSN: 1098-2329. DOI: https://doi.org/10.1002/adv.22161
K. Prusty and S. K. Swain* “Nano silver decorated polyacrylamide/dextran nanohydrogels hybrid composites for drug delivery applications” Materials Science & Engineering: C, 85, 130-141, (Elsevier), (2018). (Impact Factor: 7.53) ISSN: 0928-4931. DOI: https://doi.org/10.1016/j.msec.2017.11.028
K. Prustyand S. K. Swain* “Nanostructured chitosan composites for cancer therapy: a review” International Journal of Polymeric Materials and Polymeric Biomaterials, 67(15), 879-888, (Tylor & Francis), (2018). (Impact Factor:3.81)ISSN: 1563-535X. DOI: https://doi.org/10.1080/00914037.2017.1393678
S. K. Swain*, S. Barik, G. C. Pradhan and L. Behera “Delamination of Mg-Al layered double hydroxide on starch: change in structural and thermal properties” Polymer-Plastics Technology and Engineering, 57(15), 1585-1591, (Tylor & Francis), (2018). (Impact Factor: 3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2017.1410844
N. Sarkar, G. Sahoo, R. Das and S. K. Swain* “Three-dimensional rice straw structured magnetic nanoclay decorated tri-polymeric nanohydrogels as superabsorbent of dye pollutants”ACS Applied Nano Materials, 1, 1183-1203, (American Chemical Society), (2018). (Impact Factor: 5.6)ISSN: 2574-0970. DOI: https://doi.org/10.1021/acsanm.7b00358
S. Gantayat, N. Sarkar, G. Prusty, D. Rout and S. K. Swain* “Designing of epoxy matrix by chemically modified multiwalled carbon nanotubes” Advances in Polymer Technology, 37, 21654-21662, (Wiley), (2018). (Impact Factor: 3.1) ISSN: 1098-2329. DOI: https://doi.org/10.1002/adv. 21654
S. K. Swain* and K. Prusty “Biomedical applications of acrylic based nanohydrogels: a review” Journal of Materials Science, 53, 2303-2325, (Springer), (2018). (Impact Factor: 3.9) ISSN: 0022-2461. DOI: https://doi.org/10.1007/s10853-017-1726-x
S. Gantayat, D. Rout, S. K. Swain* “Carbon nanomaterial-reinforced epoxy composites: a review”Polymer-Plastic Technology and Engineering, 57(1), 1-16, (Tylor & Francis), (2018). (Impact Factor:3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2017.1298802
G. Sahoo, N. Sarkar and S. K. Swain* “The effect of reduced graphene oxide intercalated hybrid organoclay on the dielectric properties of polyvinylidene fluoride nanocomposite films” Applied Clay Science, 162, 69-82, (Elsevier), (2018). (Impact Factor: 5.8) ISSN: 0169-1317. DOI: https://doi.org/10.1016/j.clay.2018.05.008
K. Prusty and S. K. Swain* "h-BN huddled starch reinforced polyethylhexylacrylatepolyvinyl alcohol thin films for packaging applications" Polymer Composites, 40(05), 1810-1818, (Wiley), (2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.24941
K. Prusty, P. K. Sethy and S. K. Swain* “Sandwich structured starch grafted polyethylhexylacrylate/polyvinylalcohol thin films” Advances in Polymer Technology, 37, 37739-37791, (Wiley), (2018). (Impact Factor: 2.5) ISSN: 1098-2329. DOI: https://doi.org/10.1002/adv.22161
K. Prusty and S. K. Swain* “Nano silver decorated polyacrylamide/dextran nanohydrogels hybrid composites for drug delivery applications” Materials Science & Engineering: C, 85, 130-141, (Elsevier), (2018). (Impact Factor: 7.53) ISSN: 0928-4931. DOI: https://doi.org/10.1016/j.msec.2017.11.028
K. Prustyand S. K. Swain* “Nanostructured chitosan composites for cancer therapy: a review” International Journal of Polymeric Materials and Polymeric Biomaterials, 67(15), 879-888, (Tylor & Francis), (2018). (Impact Factor:3.81)ISSN: 1563-535X. DOI: https://doi.org/10.1080/00914037.2017.1393678
S. K. Swain*, S. Barik, G. C. Pradhan and L. Behera “Delamination of Mg-Al layered double hydroxide on starch: change in structural and thermal properties” Polymer-Plastics Technology and Engineering, 57(15), 1585-1591, (Tylor & Francis), (2018). (Impact Factor: 3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2017.1410844
N. Sarkar, G. Sahoo, R. Das and S. K. Swain* “Three-dimensional rice straw structured magnetic nanoclay decorated tri-polymeric nanohydrogels as superabsorbent of dye pollutants”ACS Applied Nano Materials, 1, 1183-1203, (American Chemical Society), (2018). (Impact Factor: 5.6)ISSN: 2574-0970. DOI: https://doi.org/10.1021/acsanm.7b00358
S. Gantayat, N. Sarkar, G. Prusty, D. Rout and S. K. Swain* “Designing of epoxy matrix by chemically modified multiwalled carbon nanotubes” Advances in Polymer Technology, 37, 21654-21662, (Wiley), (2018). (Impact Factor: 3.1) ISSN: 1098-2329. DOI: https://doi.org/10.1002/adv. 21654
S. K. Swain* and K. Prusty “Biomedical applications of acrylic based nanohydrogels: a review” Journal of Materials Science, 53, 2303-2325, (Springer), (2018). (Impact Factor: 3.9) ISSN: 0022-2461. DOI: https://doi.org/10.1007/s10853-017-1726-x
S. Gantayat, D. Rout, S. K. Swain* “Carbon nanomaterial-reinforced epoxy composites: a review”Polymer-Plastic Technology and Engineering, 57(1), 1-16, (Tylor & Francis), (2018). (Impact Factor:3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2017.1298802
G. Sahoo, N. Sarkar and S. K. Swain* “The effect of reduced graphene oxide intercalated hybrid organoclay on the dielectric properties of polyvinylidene fluoride nanocomposite films” Applied Clay Science, 162, 69-82, (Elsevier), (2018). (Impact Factor: 5.8) ISSN: 0169-1317. DOI: https://doi.org/10.1016/j.clay.2018.05.008
K. Prusty and S. K. Swain* "h-BN huddled starch reinforced polyethylhexylacrylatepolyvinyl alcohol thin films for packaging applications" Polymer Composites, 40(05), 1810-1818, (Wiley), (2019). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.24941
Padhi, P. K. â€œThe Relevance of Reading Literature in the 21st Centuryâ€ in International Journal of Management, Technology and Engineering (IJMTE) Volume-8, Issue-IX, September 2018, ISSN:2249-7455, P-2089
Padhi, P. K. â€œThe Relevance of Reading Literature in the 21st Centuryâ€ in International Journal of Management, Technology and Engineering (IJMTE) Volume-8, Issue-IX, September 2018, ISSN:2249-7455, P-2089
Padhi, P. K. â€œThe Relevance of Reading Literature in the 21st Centuryâ€ in International Journal of Management, Technology and Engineering (IJMTE) Volume-8, Issue-IX, September 2018, ISSN:2249-7455, P-2089
Padhi, P. K. â€œThe Relevance of Reading Literature in the 21st Centuryâ€ in International Journal of Management, Technology and Engineering (IJMTE) Volume-8, Issue-IX, September 2018, ISSN:2249-7455, P-2089
B. Rout, B. B. Pati, A. Pattnaik, "Small Signal Stability enhancement of Power System with GA optimized PD type PSS and AVR Control", IEEE conference on Recent Advances in Engineering, Technology and Computational Sciences- (RAETCS-2018),SIET, Allahabad, India. 10.1109/RAETCS.2018.8443890
B. Rout ,B. B. Pati, "Application of PD based fuzzy PI type FACTS device and PSS controller in enhancing the power system stability", IEEE conference on ICRIEECE-2018, July-27-28, KIIT, Bhubaneswar, India.2018,10.1109/ICRIEECE44171.2018.9009135
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
B. Rout, B. B. Pati, A. Pattnaik, "Small Signal Stability enhancement of Power System with GA optimized PD type PSS and AVR Control", IEEE conference on Recent Advances in Engineering, Technology and Computational Sciences- (RAETCS-2018),SIET, Allahabad, India. 10.1109/RAETCS.2018.8443890
B. Rout ,B. B. Pati, "Application of PD based fuzzy PI type FACTS device and PSS controller in enhancing the power system stability", IEEE conference on ICRIEECE-2018, July-27-28, KIIT, Bhubaneswar, India.2018,10.1109/ICRIEECE44171.2018.9009135
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
B. Rout, B. B. Pati, A. Pattnaik, "Small Signal Stability enhancement of Power System with GA optimized PD type PSS and AVR Control", IEEE conference on Recent Advances in Engineering, Technology and Computational Sciences- (RAETCS-2018),SIET, Allahabad, India. 10.1109/RAETCS.2018.8443890
B. Rout ,B. B. Pati, "Application of PD based fuzzy PI type FACTS device and PSS controller in enhancing the power system stability", IEEE conference on ICRIEECE-2018, July-27-28, KIIT, Bhubaneswar, India.2018,10.1109/ICRIEECE44171.2018.9009135
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
B. Rout, B. B. Pati, A. Pattnaik, "Small Signal Stability enhancement of Power System with GA optimized PD type PSS and AVR Control", IEEE conference on Recent Advances in Engineering, Technology and Computational Sciences- (RAETCS-2018),SIET, Allahabad, India. 10.1109/RAETCS.2018.8443890
B. Rout ,B. B. Pati, "Application of PD based fuzzy PI type FACTS device and PSS controller in enhancing the power system stability", IEEE conference on ICRIEECE-2018, July-27-28, KIIT, Bhubaneswar, India.2018,10.1109/ICRIEECE44171.2018.9009135
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
B. Rout, B. B. Pati, A. Pattnaik, "Small Signal Stability enhancement of Power System with GA optimized PD type PSS and AVR Control", IEEE conference on Recent Advances in Engineering, Technology and Computational Sciences- (RAETCS-2018),SIET, Allahabad, India. 10.1109/RAETCS.2018.8443890
B. Rout ,B. B. Pati, "Application of PD based fuzzy PI type FACTS device and PSS controller in enhancing the power system stability", IEEE conference on ICRIEECE-2018, July-27-28, KIIT, Bhubaneswar, India.2018,10.1109/ICRIEECE44171.2018.9009135
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
B. Rout, B. B. Pati, A. Pattnaik, "Small Signal Stability enhancement of Power System with GA optimized PD type PSS and AVR Control", IEEE conference on Recent Advances in Engineering, Technology and Computational Sciences- (RAETCS-2018),SIET, Allahabad, India. 10.1109/RAETCS.2018.8443890
B. Rout ,B. B. Pati, "Application of PD based fuzzy PI type FACTS device and PSS controller in enhancing the power system stability", IEEE conference on ICRIEECE-2018, July-27-28, KIIT, Bhubaneswar, India.2018,10.1109/ICRIEECE44171.2018.9009135
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
"A novel rough set based affinity propagation method for cholesterol prediction from ABC transporter", Ramamani Tripathy, Debahuti Mishra, RudraKalyanNayak & Satyabrata Das, Indian Journal of Public Health Research & Development (Scopus)9 (9), 1420-1426(2018), DOI:10.5958/0976-5506.2018.01190.7
"Survey of Energy-Efficient Techniques for the Cloud-Integrated Sensor Network", Kalyan Das, Satyabrata Das, Rabi Kumar Darji &Ananya Mishra, Journal of Sensors, Hindawi,(SCIE) Volume 2018 (2018), Article ID 1597089, pp 1-17, https://www.hindawi.com/journals/js/2018/1597089
"Task Partitioning Scheduling Algorithm for Heterogeneous Multi-Cloud Environment", Sanjaya Ku. Panda, Sohan Ku. Pandey & Satyabrata Das, Arabian Journal for Science and Engineering (AJSE) Springer 2017,(SCI) Vol 1 Issue 12, pp 1-21,https://link.springer.com/article/10.1007/s13369-017-2798-2,DOI:https://doi.org/10.1007/s13369-017-2798-2
Swain, P. K., Biswal, T., Kar, P. K., & Panda, R. B. (2018) Recycling and utilization of solid waste generated in the Rourkela steel plant, Odisha, Journal of Industrial Pollution Control 34(2):2080-2087.
Panda, G., Biswal, T*., Panda R B. (2018). Assessment of Ambient Air Quality Status of Industrial Complex, Balasore City, Orissa. International Journal of Environmental Sciences & Natural Resources, 10(3), 110-116.
Biswal, T*., Mahapatra, A. K., Kar, P. K., & Panda, R. B. (2018). Water Quality Analysis of the Steel City, Rourkela (Odisha), American Journal of Water Resources, 6(2), 65-70.
Panda, R. B., & Biswal, T* (2018). Impact of fly ash on soil properties and productivity. International Journal of Agriculture, Environment and Biotechnology, 11(2), 275-283.
Biswal, T*., Mahapatra, A. K., Kar, P. K., & Panda, R. B. (2018). Water Quality Analysis of the Steel City, Rourkela (Odisha). American Journal of Water Resources, 6(2), 65-70.
B. Rout, B. B. Pati, A. Pattnaik, "Small Signal Stability enhancement of Power System with GA optimized PD type PSS and AVR Control", IEEE conference on Recent Advances in Engineering, Technology and Computational Sciences- (RAETCS-2018),SIET, Allahabad, India. 10.1109/RAETCS.2018.8443890
B. Rout ,B. B. Pati, "Application of PD based fuzzy PI type FACTS device and PSS controller in enhancing the power system stability", IEEE conference on ICRIEECE-2018, July-27-28, KIIT, Bhubaneswar, India.2018,10.1109/ICRIEECE44171.2018.9009135
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
B. Rout, B. B. Pati, A. Pattnaik, "Small Signal Stability enhancement of Power System with GA optimized PD type PSS and AVR Control", IEEE conference on Recent Advances in Engineering, Technology and Computational Sciences- (RAETCS-2018),SIET, Allahabad, India. 10.1109/RAETCS.2018.8443890
B. Rout ,B. B. Pati, "Application of PD based fuzzy PI type FACTS device and PSS controller in enhancing the power system stability", IEEE conference on ICRIEECE-2018, July-27-28, KIIT, Bhubaneswar, India.2018,10.1109/ICRIEECE44171.2018.9009135
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
B. Rout, B. B. Pati, A. Pattnaik, "Small Signal Stability enhancement of Power System with GA optimized PD type PSS and AVR Control", IEEE conference on Recent Advances in Engineering, Technology and Computational Sciences- (RAETCS-2018),SIET, Allahabad, India. 10.1109/RAETCS.2018.8443890
B. Rout ,B. B. Pati, "Application of PD based fuzzy PI type FACTS device and PSS controller in enhancing the power system stability", IEEE conference on ICRIEECE-2018, July-27-28, KIIT, Bhubaneswar, India.2018,10.1109/ICRIEECE44171.2018.9009135
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
B. Rout, B. B. Pati, A. Pattnaik, "Small Signal Stability enhancement of Power System with GA optimized PD type PSS and AVR Control", IEEE conference on Recent Advances in Engineering, Technology and Computational Sciences- (RAETCS-2018),SIET, Allahabad, India. 10.1109/RAETCS.2018.8443890
B. Rout ,B. B. Pati, "Application of PD based fuzzy PI type FACTS device and PSS controller in enhancing the power system stability", IEEE conference on ICRIEECE-2018, July-27-28, KIIT, Bhubaneswar, India.2018,10.1109/ICRIEECE44171.2018.9009135
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
B. Rout, B. B. Pati, A. Pattnaik, "Small Signal Stability enhancement of Power System with GA optimized PD type PSS and AVR Control", IEEE conference on Recent Advances in Engineering, Technology and Computational Sciences- (RAETCS-2018),SIET, Allahabad, India. 10.1109/RAETCS.2018.8443890
B. Rout ,B. B. Pati, "Application of PD based fuzzy PI type FACTS device and PSS controller in enhancing the power system stability", IEEE conference on ICRIEECE-2018, July-27-28, KIIT, Bhubaneswar, India.2018,10.1109/ICRIEECE44171.2018.9009135
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
B. Rout, B. B. Pati, A. Pattnaik, "Small Signal Stability enhancement of Power System with GA optimized PD type PSS and AVR Control", IEEE conference on Recent Advances in Engineering, Technology and Computational Sciences- (RAETCS-2018),SIET, Allahabad, India. 10.1109/RAETCS.2018.8443890
B. Rout ,B. B. Pati, "Application of PD based fuzzy PI type FACTS device and PSS controller in enhancing the power system stability", IEEE conference on ICRIEECE-2018, July-27-28, KIIT, Bhubaneswar, India.2018,10.1109/ICRIEECE44171.2018.9009135
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
B. Rout, B. B. Pati, A. Pattnaik, "Small Signal Stability enhancement of Power System with GA optimized PD type PSS and AVR Control", IEEE conference on Recent Advances in Engineering, Technology and Computational Sciences- (RAETCS-2018),SIET, Allahabad, India. 10.1109/RAETCS.2018.8443890
B. Rout ,B. B. Pati, "Application of PD based fuzzy PI type FACTS device and PSS controller in enhancing the power system stability", IEEE conference on ICRIEECE-2018, July-27-28, KIIT, Bhubaneswar, India.2018,10.1109/ICRIEECE44171.2018.9009135
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
B. Rout, B. B. Pati, A. Pattnaik, "Small Signal Stability enhancement of Power System with GA optimized PD type PSS and AVR Control", IEEE conference on Recent Advances in Engineering, Technology and Computational Sciences- (RAETCS-2018),SIET, Allahabad, India. 10.1109/RAETCS.2018.8443890
B. Rout ,B. B. Pati, "Application of PD based fuzzy PI type FACTS device and PSS controller in enhancing the power system stability", IEEE conference on ICRIEECE-2018, July-27-28, KIIT, Bhubaneswar, India.2018,10.1109/ICRIEECE44171.2018.9009135
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
B. Rout ,B. B. Pati, "Application of PD based fuzzy PI type FACTS device and PSS controller in enhancing the power system stability", IEEE conference on ICRIEECE-2018, July-27-28, KIIT, Bhubaneswar, India.2018,10.1109/ICRIEECE44171.2018.9009135
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
B. Rout ,B. B. Pati, "Application of PD based fuzzy PI type FACTS device and PSS controller in enhancing the power system stability", IEEE conference on ICRIEECE-2018, July-27-28, KIIT, Bhubaneswar, India.2018,10.1109/ICRIEECE44171.2018.9009135
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
B. Rout ,B. B. Pati, "Application of PD based fuzzy PI type FACTS device and PSS controller in enhancing the power system stability", IEEE conference on ICRIEECE-2018, July-27-28, KIIT, Bhubaneswar, India.2018,10.1109/ICRIEECE44171.2018.9009135
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018
B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018
B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.
Behera, A., Behera, R. K., Sahu, P., Swain, R. R., Mahapatra, T.R. (2018) Tensile and Failure Behavior of Kevlar Fiber Reinforced Epoxy Matrix Composite Exposed to Different Environmental Conditions, Materials Today: Proceedings, Vol. 5 (9), pp. 20250-20256, DOI: 10.1016/j.matpr.2018.06.396, (IF: 0.94) (SCOPUS)
Sahoo, S., Mahapatra, T. R. (2018) ANN Modeling to study strength loss of Fly Ash Concrete against Long term Sulphate Attack, Materials Today: Proceedings, Vol. 5 (11), pp. 24595-24604, DOI: 10.1016/j.matpr.2018.10.257, (IF: 0.94) (SCOPUS)
Dash, S, Sharma, N, Mahapatra, T. R., Panda, S. K. and Sahu, P (2018) Free vibration analysis of functionally graded sandwich flat panel, IOP Conf. Series: Materials Science and Engineering, Vol. 377 (1) 012140, doi:10.1088/1757-899X/377/1/012140, (IF: 0.39) (SCOPUS)
Sharma, N., Mahapatra, T. R. and Panda, S. K., Mazumdar, A. (2018) Acoustic radiation characteristics of un-baffled laminated composite conical shell panels, Materials Today: Proceedings, Vol. 5 (11), pp. 24387-24396, DOI: 10.1016/j.matpr.2018.10.234, (IF: 2.59) (SCOPUS)
Sharma, N., Mahapatra, T. R. and Panda, S. K., (2018) Analysis of vibro-acoustic response of un-baffled laminated composite conical shell panel with varying thickness, IOP Conf. Series: Materials Science and Engineering 377, 012139, DOI: 10.1088/1757-899X/377/1/012139, (IF: 0.39) (SCOPUS)
Sharma, N., Mahapatra T. R., Panda, S. K., Sahu, P., (2018) Characterization of the Acoustic Radiation Properties of Laminated and Sandwich Composite Panels in Thermal Environment, IOP Conference Series: Materials Science and Engineering, Vol. 338(1), 012031, DOI: 10.1088/1757-899X/338/1/012031. (IF: 0.39, SCOPUS)
Katariya, P. V., Panda, S. K. and Mahapatra, T. R. (2018) Bending and vibration analysis of skew sandwich plate, Aircraft Engineering and Aerospace Technology, Vol. 90 (6), pp.885-895, DOI: 10.1108/AEAT-05-2016-0087, (IF: 0.519) SCI
Hirwani, C. K., Panda, S. K., Mahapatra, T. R., Mandal, S. K., Mahapatra, S. S. and De, A. K. (2018), Delamination effect on flexural responses of layered curved shallow shell panel-Experimental and numerical analysis, International Journal of Computational Methods, Vol. 15 (4), pp. 1850027, DOI: 10.1142/S0219876218500275 (IF: 1.053). SCIE
Mehar, K., Panda, S. K. and Mahapatra, T. R. (2018), Thermoelastic Deflection Responses of CNT Reinforced Sandwich Shell Structure using Finite Element Method, Scientia Iranica, Vol. 25 (5B), pp. 2722-2737, DOI: 10.24200/SCI.2017.4525 (IF: 1.025) SCIE
Sharma, N., Mahapatra, T. R., Panda, S. K. (2018), Vibro-acoustic analysis of laminated composite plate structure using structure-dependent radiation modes: An experimental validation, Scientia Iranica, Vol. 25 (5B), pp. 2706-2721, DOI: 10.24200/sci.2018.20420 (IF: 1.025) SCIE
Sharma, N., Mahapatra, T. R. and Panda, S. K., (2018) Evaluation of vibroacoustic responses of laminated composite sandwich structure using higher-order finite-boundary element model, Steel and Composite Structures, Vol. 28 (5), pp. 629-639 (IF: 4.6) SCI.
Hirwani, C. K., Panda, S. K., Mahapatra, T. R. (2018), Thermomechanical Deflection and Stress Responses of Delaminated Shallow Shell Structure using Higher-Order Theories, Composite Structures, Vol. 184, pp. 135-145, DOI: 10.1016/j.compstruct.2017.09.071 (IF: 6.3). SCI
Sharma, N., Mahapatra, T. R., Panda, S. K., Hirwani, C. K. (2018), Thermoacoustic Behavior of Laminated Composite Curved Panels Using Higher-Order Finite-Boundary Element Model, International Journal of Applied Mechanics, Vol. 10 (2), pp. 1850017, DOI: 10.1142/S1758825118500175 (IF: 1.954). SCIE
Hirwani, C. K., Panda, S. K. and Mahapatra, T. R. (2018), Nonlinear Finite Element Analysis of Transient Behavior of Delaminated Composite Plate, Journal of Vibration and Acoustics, Transactions of the ASME, Vol. 140 (2), pp. 021001, DOI: 10.1115/1.4037848, (IF: 1.692) SCIE.
Mehar, K., Panda, S. K., Mahapatra, T. R., (2018), Nonlinear Frequency Responses Of Functionally Graded Carbon Nanotube-Reinforced Sandwich Curved Panel Under Uniform Temperature Field, International Journal of Applied Mechanics, Vol. 10 (3), pp. 1850028, DOI: 10.1142/S175882511850028X (IF: 1.954). SCIE
Sharma, N., Mahapatra, T. R., Panda, S. K., Hirwani, C. K. (2018), Acoustic radiation and frequency response of higher-order shear deformable multilayered composite doubly curved shell panel – An experimental validation, Applied Acoustics, Vol. 133, pp. 38-51, DOI: 10.1016/j.apacoust.2017.12.013, (IF: 1.921). SCIE
Sharma, N., Mahapatra, T. R. and Panda, S. K., (2018) Numerical analysis of acoustic radiation responses of shear deformable laminated composite shell panel in hygrothermal environment, Journal of Sound and Vibration, Vol. 431, pp. 346-366, DOI: 10.1016/j.jsv.2018.06.007, (IF: 3.20) SCI.
Mehar, K., Mahapatra, T. R., Panda, S. K., Katariya, P. V., and Tompe, U. K (2018) Finite-Element Solution to Nonlocal Elasticity and Scale Effect on Frequency Behavior of Shear Deformable Nanoplate Structure, Journal of Engineering Mechanics, ASCE, Vol. 144(9), pp. 04018094, DOI: 10.1061/(ASCE)EM.1943-7889.0001519 (IF: 1.80) SCI
Dash, S., Mehar, K., Sharma, N., Mahapatra, T. R., Panda, S. K. (2018) Modal analysis of FG sandwich doubly curved shell structure, Structural Engineering and Mechanics, Vol. 68 (6), pp. 721-733, DOI: 10.12989/sem.2018.68.6.721, (IF: 2.91) SCI
Sharma, N., Mahapatra, T. R., Panda, S. K. (2018), Numerical analysis of acoustic radiation properties of laminated composite flat panel in thermal environment: A higher-order finite-boundary element approach. IMechE Part C: Journal of Mechanical Engineering Science, Vol. 232 (18), pp. 3235-3249, DOI: 10.1177/0954406217735866 (IF: 1.015) SCI
Swain, P. T. R., & Biswas, S., â€œA comparative analysis of physicoâ€mechanical, water absorption, and morphological behaviour of surface modified woven jute fiber compositesâ€, Polymer Composites, vol. 39, no. 8, pp. 2952-2960, 2018, doi: https://doi.org/10.1002/pc.24294
Swain, P. T. R., Das, S. N., & Jena, S. P., (2018). â€œManufacturing and Study of Thermo-Mechanical Behaviour of Surface Modified Date Palm Leaf/Glass Fiber Reinforced Hybrid Compositeâ€ Materials Today: Proceedings, vol. 5, no. 9, pp. 18332-18341, 2018, doi: https://doi.org/10.1016/j.matpr.2018.06.172
Padhi, P. K. â€œThe Relevance of Reading Literature in the 21st Centuryâ€ in International Journal of Management, Technology and Engineering (IJMTE) Volume-8, Issue-IX, September 2018, ISSN:2249-7455, P-2089
A Brief Review: Biological Implications of Naphthoquinone Derivatives. B. R. Jali*, R. Behura, Soumya. R. Barik, S. Parveen, Spandan. P. Mohanty and R. Das, Research J. Pharm. and Tech. 11 (2018) 3698.
Sourav Kumar Sahu , Sumanta Panda and Ajit Kumar Pattanaik An Algorithm for Online Path Planning of Mobile-Robot based on Displacement Vector Method, International Journal of Advanced Mechanical Engineering. Volume 8, Number 1 (2018), pp. 275-284
S Panda, SN Panda A multi objective optimum design approach for rolling element bearing International Journal on Interactive Design and Manufacturing (IJIDeM) 12 (3) 1095â€“1108 (2018)
Biodiesel from Non-Edible Vegetable Oils: A Review on Engine Performance and Emission Characteristics
Process parameter optimization of hydrostatic extrusion using metaheuristic
Laser beam micro drillingâ€“a review
P. Patro, A. Rout and A. Barik, Numerical heat transfer prediction for laminar flow in a circular pipe with a 90-degree bend, Journal of the Institution of Engineers (India): Series C, 99(3), 323-327 (2018).
P. Patro, Pneumatic conveying in horizontal pipes: Eulerian modeling and pressure drop characteristics, American Journal of Mathematical and Computational Sciences, 3 (1), 10-16 (2018),
GauravChatterjee, K.P. Shadangi and K. Mohanty, Fuel properties and composition study of Cassia Siamea seed crude pyrolytic oil and char. Fuel 234 (2018) 609â€“615.
S. S. Mohapatra,K. P. Shadangi and R. K. Singh, Fuel Properties and Composition Analysis of Sugarcane Bagasse Thermal Pyrolytic liquid. Journal of Emerging Technologies and Innovative Research 5 (7) (2018).
G. Ganeshan, K.P. Shadangi and K. Mohanty, Degradation kinetic study of pyrolysis and co-pyrolysis of biomass with polyethylene terephthalate (PET) using Coatsâ€“Redfern method. Journal of Thermal Analysis and Calorimetry 131 (2) (2018)1803-1816.
Nivedita Patel and K.P. Shadangi, Removal of Sludge from Waste Engine oil using 1-Butanol: Optimization Using Response Surface Methodology, Universal Review 7, XI (2018).
Mishra, Anjana, Bighnaraj Naik, and Suresh Kumar Srichandan. "Missing value imputation using ANN optimized by genetic algorithm." International Journal of Applied Industrial Engineering (IJAIE) 5.2 (2018): 41-57.
Unsteady MHD flow and heat transfer of third grade fluid with variable viscocity between two porous plates (I nayak A.K.Nayak S Padhy)J- Int. J. of mathematics treands and technology, Vol. 54(2)pg.-146-155, ISSN No.-2231-5373(2018)
Finite element solution for unsteady flow of a third grade fluid between two plates (I nayak A.K.Nayak S Padhy)J.- Int. J. of advanced mechanical engineering, Vol.-8(1), pg.-87-99, ISSN No.-2250-3234(2018).
S.Kisan, S. N. Mishra, A. Chawda, S. Nayak, “Estimation of Fractal Dimension in Different color model”, IJKDB-8, IGI Global, DOI: 10.4018/IJKDB.2018010106, pp-75-93, ISSN: 1947-9115, 2018
"A novel rough set based affinity propagation method for cholesterol prediction from ABC transporter", Ramamani Tripathy, Debahuti Mishra, RudraKalyanNayak & Satyabrata Das, Indian Journal of Public Health Research & Development (Scopus)9 (9), 1420-1426(2018), DOI:10.5958/0976-5506.2018.01190.7
"Survey of Energy-Efficient Techniques for the Cloud-Integrated Sensor Network", Kalyan Das, Satyabrata Das, Rabi Kumar Darji &Ananya Mishra, Journal of Sensors, Hindawi,(SCIE) Volume 2018 (2018), Article ID 1597089, pp 1-17, https://www.hindawi.com/journals/js/2018/1597089
"Task Partitioning Scheduling Algorithm for Heterogeneous Multi-Cloud Environment", Sanjaya Ku. Panda, Sohan Ku. Pandey & Satyabrata Das, Arabian Journal for Science and Engineering (AJSE) Springer 2017,(SCI) Vol 1 Issue 12, pp 1-21,https://link.springer.com/article/10.1007/s13369-017-2798-2,DOI:https://doi.org/10.1007/s13369-017-2798-2
S. N. Mishra, D. Konhar, D. Mishra, R. K. Mishra, “On the possibility of Linear polarization in Elliptical microstrip patch antenna”, Microwave and Optical technology Letters, Vol. 61,pp 1048-1051, August 2018 (ESCI,SCOPUS)
Meher, Bikash; Agrawal, S; Mishro, Pranaba K; , A region based optimal multifocus image fusion scheme, 2018 International Conference on Recent Innovations in Electrical, Electronics & Communication Engineering (ICRIEECE), Pages 499-503, IEEE
Mishra, Premananda; Agrawal, Sanjay; Panda, Rutuparna; , A novel ecg beats classification scheme using differentiated dwt and svm, 2018 15th IEEE India Council International Conference (INDICON), Pages 1-6, IEEE
Agrawal, Sanjay; Panda, Rutuparna; Abraham, Ajith; , A novel diagonal class entropy-based multilevel image thresholding using coral reef optimization, IEEE Transactions on Systems, Man, and Cybernetics: Systems, Volume 50.0, Number 11, Pages 4688-4696, IEEE
Dora, Lingraj; Agrawal, Sanjay; Panda, Rutuparna; Abraham, Ajith; , Nested cross-validation based adaptive sparse representation algorithm and its application to pathological brain classification, Expert Systems with Applications, Volume 114.0, Pages 313-321, Pergamon
Mohanty, N. and Panigrahi, S. K. (2018), Effect of Laminate Thickness on GFRP Strengthened RC T-Beam, Proceedings of the 11th Structural Engineering Convention, Jadavpur University, Kolkata, pp 31-37, 19th –21th, December.
Sahu, S.; Sahoo, A. P.; Shubhadarshinee, L.; S, R. D.; Barick, A. K. Effect of Polyaniline?coated Carbon Nanotube and Nanosilver Hybrid Nanoparticles on the Dielectric Properties of Poly(Methyl Methacrylate) Nanocomposites. Polymer Composites, 2018, 39. https://doi.org/10.1002/pc.24877. (SCI & SCOPUS)
K Prusty, P K Sethy and S K Swain* â€œSandwich structured starch grafted polyethylhexylacrylate/polyvinylalcohol thin filmsâ€ Advances in Polymer Technology (Wiley), 37, 37739-37791 (2018), DOI: 10.1002/adv.22161 (Impact Factor: 2.663).
K. Prusty and S K Swain* â€œNano Silver Decorated Polyacrylamide/Dextran Nanohydrogels hybrid composites for Drug Delivery Applicationsâ€ Materials Science & Engineering: C (Elsevier) 85, 130-141 (2018) (Impact Factor: 4.959). DOI: doi.org/10.1016/j.msec.2017.11.028.
K Prusty and S K Swain* â€œNanostructured Chitosan Composites for Cancer Therapy: A Reviewâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Tylor & Francis), (Impact Factor: 2.263) 67(15),879-888 (2018) DOI. 10.1080/00914037.2017.1393678.
S. K. Swain*, S. Barik, G C Pradhan and L. Behera â€œDelamination of Mg-Al Layered Double Hydroxide on Starch: Change in Structural and Thermal Propertiesâ€ Polymer-Plastics Technology and Engineering (Tylor & Francis), (Impact Factor: 1.655) 57(15), 1585-1591 (2018) Doi: 10.1080/03602559.2017.1410844.
N. Sarkar, G Sahoo, R Das and S K Swain* â€œThree-Dimensional Rice Straw Structured Magnetic Nanoclay Decorated Tri-polymeric Nanohydrogels as Superabsorbent of Dye Pollutantsâ€ ACS Applied Nano Materials (American Chemical Society) 1, 1183-1203 (2018). DOI: 10.1021/acsanm.7b00358
S Gantayat, N. Sarkar, G Prusty, D. Rout and S K Swain* â€œDesigning of epoxy matrix by chemically modified multiwalled carbon nanotubesâ€ Advances in Polymer Technology (Wiley), 37, 21654-21662 (2018), DOI: 10.1002/adv. 21654 (Impact Factor: 2.663)
S K Swain* and K Prustyâ€ Biomedical applications of acrylic based nanohydrogels: A reviewâ€ Journal of Materials Science (Springer) 53, 2303-2325 (2018) (Impact Factor: 3.442) DOI: 10.1007/s10853-017-1726-x.
S Gantayat, D Rout, SK Swain* â€œCarbon Nanomaterials Reinforced Epoxy Composites: A Reviewâ€ Polymer-Plastic Technology and Engineering, (Tylor & Francis), 57(1), 1-16 (2018) (Impact Factor: 1.655) DOI.org/10.1080/03602559.2017.1298802.
G Sahoo, N Sarkar and S K Swain* â€œThe effect of reduced graphene oxide intercalated hybrid nanoclay on the dielectric properties of polyvinylidene fluoride nanocomposite filmsâ€ Applied Clay Science (Elsevier) 162 69-82 (2018) (Impact Factor: 3.890).
K. Prusty and S K Swain* "h-BN huddled starch reinforced PolyethylhexylacrylatePolyvinyl alcohol thin films for packaging applications" Polymer Composites (Wiley), (2018). (Impact Factor: 2.262) Accepted. doi.org/10.1002/pc.24941.
S. Behera and M.C.P. Sahoo, ”Stability Improvement of Isolated Wind-Diesel System with Optimized STATCOM Controller,” International Journal of Control and Automation, SERSC publisher, vol. 11, no. 10, pp.71-84, 2018. (Scopus) DOI: http//dx.doi.org/10.14257/ijca.2018.11.10.07 ISSN: 2005-4297
S. Behera and M. Jyotiranjan, “Comparative study of different converter with its controller for grid connected WECS with PMSG,” International Journal of Energy Optimization and Engineering, vol.8, no. 2, pp.1-24,2018. (ESCI/ UGC CARE) DOI: 10.4018/IJEOE.2019040101 ISSN: 2160-9543
S. Behera, D. Mahanta, O. Anshuman and D. Oram, “Fingerprint Based Vehicle Security and Control,” International Journal of Current Advanced Research (IJCAR), vol.7, no. 10, pp. 10916-10918, 2018. (UGC CARE) DOI: http://dx.doi.org/10.24327/ijcar.2018.10918.1874 ISSN: 2319-6475
S Behera, P. K. Muduli, “Remote Speed Control of BLDC Motor with Display,” International Journal of Automation and Smart Technology (AUSMT), vol.8, no. 2, pp.65-71, 2018, (Scopus) DOI: 10.5875/ausmt.v8i2.1458 ISSN: 2223-9766
Deepak Kumar Lal, A. K. Barisal, and M. Tripathy, "Load Frequency Control of Multi Source Multi-Area Nonlinear Power System with DE-PSO Optimized Fuzzy PID Controller in Coordination with SSSC and RFB", International Journal of Control and Automation (SERSC Australia Publications), Volume 11, Issue 7, pp. 61-80, 2018.https://doi: http//dx.doi.org/10.14257/ijca.2018.11.7.06
Ajit Kumar Barisal, and Deepak Kumar Lal, "Application of Moth Flame Optimization Algorithm for AGC of Multi-Area Interconnected Power Systems", International Journal of Energy Optimization and Engineering (IGI Global Publication), Volume 7, Issue 1, pp. 22-49, 2018.https://doi: 10.4018/IJEOE.2018010102
Narasingh Deep, Punyapriya Mishra “Fabrication and characterization of thermally conductive PMMA/MWCNT nanocomposites”, Materials Today Proceedings, 5(14), 28328-28336
Debasmita Pani, Punyapriya Mishra, Tribological behavior of sponge gourd based hybrid reinforced polymer composite, International Journal of Advanced Mechanical Engineering, 8(1), Special edition, 89-96
S N Panda, S.Panda, D.S.Khamari, P.Mishra, “Re-examination for effect of ball race conformity on life of Rolling Element bearing using Metaheuristic, International Journal of Advanced Mechanical Engineering, 8 (1) 285-294
Narasingh Deep, Punyapriya Mishra, “Evaluation of mechanical properties of functionalized carbon nano tube reinforced PMMA polymer nanocomposite”, Karbala International Journal of Modern Science, 4(2), 207-215
Tanushree Bera, S.K.Acharya, Punyapriya Mishra “Synthesis, mechanical, thermal Properties of carbon black/epoxy composites”, International Journal of Engineering, Science and Technology, 10 (4), 12-20
Bidyadhar Rout, and B.B. Pati,(2018) “MFO Optimised Fractional Based Controller on Power System Stability”, Proceedings of Engineering and Technology Innovation(PETI), Vol.8, pp.46-59, 2018.
Rosy Pradhan, S.K. Majhi, and B.B. Pati,(2018) "Design of PID controller for Automatic Voltage Regulator System using Ant Lion Optimizer", World Journal of Engineering, Emerald, Vol.15, No.3 pp.373-387, 2018.
Bidyadhar Rout, B.B.Pati and S. Panda, (2018)“A hybrid modified differential evolution pattern search approach for SSSC based damping controller design under communication constraints”, Int. J. System Assur. Engg. Manag(Springer), Vol.9, No.4, pp.962-971, Aug.2018.
Bidyadhar Rout, B.B.Pati and S.Panda,(2018) “Modified SCA algorithm for SSSC damping Controller design in Power System”, ECTI Transactions on Electrical Engineering, Electronics, and Communications, Vol.16, No.1, pp.46-63, Feb.2018.
Rosy Pradhan, S. K. Majhi, J. K. Pradhan, and B. B. Pati,(2018) “Antlion optimizer tuned PID controller based on Bode ideal transfer function for automobile cruise control system,” Journal of Industrial Information Integration, (Elsevier ) vol. 9, pp. 45–52, 2018.
Panda, A., Das, S. R., & Dhupal, D. (2017). Surface roughness analysis for economical feasibility study of coated ceramic tool in hard turning operation. Process Integration and Optimization for Sustainability, 1(4), 237–249.
Das, S. R., Panda, A., & Dhupal, D. (2017). Experimental investigation of surface roughness, flank wear, chip morphology and cost estimation during machining of hardened AISI 4340 steel with coated carbide insert. Mechanics of Advanced Materials and Modern Processes, 3(1), 9.
Panda, A., Das, S. R., & Dhupal, D. (2017). Surface roughness analysis for economical feasibility study of coated ceramic tool in hard turning operation. Process Integration and Optimization for Sustainability, 1(4), 237–249.
Das, S. R., Panda, A., & Dhupal, D. (2017). Experimental investigation of surface roughness, flank wear, chip morphology and cost estimation during machining of hardened AISI 4340 steel with coated carbide insert. Mechanics of Advanced Materials and Modern Processes, 3(1), 9.
Panda, A., Das, S. R., & Dhupal, D. (2017). Surface roughness analysis for economical feasibility study of coated ceramic tool in hard turning operation. Process Integration and Optimization for Sustainability, 1(4), 237–249.
Das, S. R., Panda, A., & Dhupal, D. (2017). Experimental investigation of surface roughness, flank wear, chip morphology and cost estimation during machining of hardened AISI 4340 steel with coated carbide insert. Mechanics of Advanced Materials and Modern Processes, 3(1), 9.
Panda, A., Das, S. R., & Dhupal, D. (2017). Surface roughness analysis for economical feasibility study of coated ceramic tool in hard turning operation. Process Integration and Optimization for Sustainability, 1(4), 237–249.
Das, S. R., Panda, A., & Dhupal, D. (2017). Experimental investigation of surface roughness, flank wear, chip morphology and cost estimation during machining of hardened AISI 4340 steel with coated carbide insert. Mechanics of Advanced Materials and Modern Processes, 3(1), 9.
Panda, A., Das, S. R., & Dhupal, D. (2017). Surface roughness analysis for economical feasibility study of coated ceramic tool in hard turning operation. Process Integration and Optimization for Sustainability, 1(4), 237–249.
Das, S. R., Panda, A., & Dhupal, D. (2017). Experimental investigation of surface roughness, flank wear, chip morphology and cost estimation during machining of hardened AISI 4340 steel with coated carbide insert. Mechanics of Advanced Materials and Modern Processes, 3(1), 9.
Panda, A., Das, S. R., & Dhupal, D. (2017). Surface roughness analysis for economical feasibility study of coated ceramic tool in hard turning operation. Process Integration and Optimization for Sustainability, 1(4), 237–249.
Das, S. R., Panda, A., & Dhupal, D. (2017). Experimental investigation of surface roughness, flank wear, chip morphology and cost estimation during machining of hardened AISI 4340 steel with coated carbide insert. Mechanics of Advanced Materials and Modern Processes, 3(1), 9.
Panda, A., Das, S. R., & Dhupal, D. (2017). Surface roughness analysis for economical feasibility study of coated ceramic tool in hard turning operation. Process Integration and Optimization for Sustainability, 1(4), 237–249.
Das, S. R., Panda, A., & Dhupal, D. (2017). Experimental investigation of surface roughness, flank wear, chip morphology and cost estimation during machining of hardened AISI 4340 steel with coated carbide insert. Mechanics of Advanced Materials and Modern Processes, 3(1), 9.
Panda, A., Das, S. R., & Dhupal, D. (2017). Surface roughness analysis for economical feasibility study of coated ceramic tool in hard turning operation. Process Integration and Optimization for Sustainability, 1(4), 237–249.
Das, S. R., Panda, A., & Dhupal, D. (2017). Experimental investigation of surface roughness, flank wear, chip morphology and cost estimation during machining of hardened AISI 4340 steel with coated carbide insert. Mechanics of Advanced Materials and Modern Processes, 3(1), 9.
Panda, A., Das, S. R., & Dhupal, D. (2017). Surface roughness analysis for economical feasibility study of coated ceramic tool in hard turning operation. Process Integration and Optimization for Sustainability, 1(4), 237–249.
Das, S. R., Panda, A., & Dhupal, D. (2017). Experimental investigation of surface roughness, flank wear, chip morphology and cost estimation during machining of hardened AISI 4340 steel with coated carbide insert. Mechanics of Advanced Materials and Modern Processes, 3(1), 9.
Panda, A., Das, S. R., & Dhupal, D. (2017). Surface roughness analysis for economical feasibility study of coated ceramic tool in hard turning operation. Process Integration and Optimization for Sustainability, 1(4), 237–249.
Das, S. R., Panda, A., & Dhupal, D. (2017). Experimental investigation of surface roughness, flank wear, chip morphology and cost estimation during machining of hardened AISI 4340 steel with coated carbide insert. Mechanics of Advanced Materials and Modern Processes, 3(1), 9.
Panda, A., Das, S. R., & Dhupal, D. (2017). Surface roughness analysis for economical feasibility study of coated ceramic tool in hard turning operation. Process Integration and Optimization for Sustainability, 1(4), 237–249.
Das, S. R., Panda, A., & Dhupal, D. (2017). Experimental investigation of surface roughness, flank wear, chip morphology and cost estimation during machining of hardened AISI 4340 steel with coated carbide insert. Mechanics of Advanced Materials and Modern Processes, 3(1), 9.
Panda, A., Das, S. R., & Dhupal, D. (2017). Surface roughness analysis for economical feasibility study of coated ceramic tool in hard turning operation. Process Integration and Optimization for Sustainability, 1(4), 237–249.
Das, S. R., Panda, A., & Dhupal, D. (2017). Experimental investigation of surface roughness, flank wear, chip morphology and cost estimation during machining of hardened AISI 4340 steel with coated carbide insert. Mechanics of Advanced Materials and Modern Processes, 3(1), 9.
Panda, A., Das, S. R., & Dhupal, D. (2017). Surface roughness analysis for economical feasibility study of coated ceramic tool in hard turning operation. Process Integration and Optimization for Sustainability, 1(4), 237–249.
Das, S. R., Panda, A., & Dhupal, D. (2017). Experimental investigation of surface roughness, flank wear, chip morphology and cost estimation during machining of hardened AISI 4340 steel with coated carbide insert. Mechanics of Advanced Materials and Modern Processes, 3(1), 9.
Panda, A., Das, S. R., & Dhupal, D. (2017). Surface roughness analysis for economical feasibility study of coated ceramic tool in hard turning operation. Process Integration and Optimization for Sustainability, 1(4), 237–249.
Das, S. R., Panda, A., & Dhupal, D. (2017). Experimental investigation of surface roughness, flank wear, chip morphology and cost estimation during machining of hardened AISI 4340 steel with coated carbide insert. Mechanics of Advanced Materials and Modern Processes, 3(1), 9.
90. Panda, A., Das, S. R., & Dhupal, D. (2017). Surface roughness analysis for economical feasibility study of coated ceramic tool in hard turning operation. Process Integration and Optimization for Sustainability, 1(4), 237–249.
91. Das, S. R., Panda, A., & Dhupal, D. (2017). Experimental investigation of surface roughness, flank wear, chip morphology and cost estimation during machining of hardened AISI 4340 steel with coated carbide insert. Mechanics of Advanced Materials and Modern Processes, 3(1), 9.
F. Mohanty and S. K. Swain* “Carbon nanotube embedded polymer composite: properties and applications” Current Organic Synthesis, 14 (2), 249-262, (Bentham Science Publishers), (2017). (Impact Factor: 2.5) ISSN: 1570-1794. DOI: https://doi.org/10.2174/1570179413666160831124314 (Invited article)
G. Sahoo, N. Sarkar and S. K. Swain*, “Antimicrobial properties of nano gold imprinted starch bionanocomposites” Polymer-Plastic Technology and Engineering, 56(3), 334–345, (Tylor & Francis) (2017) (Impact Factor: 3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2016.1185629
N. Sarkar, G. Sahoo, P. Priyadashini, S. Khuntia, J. R. Mohanty and S. K. Swain* “Fabrication of acrylic modified coconut fiber reinforced polypropylene biocomposites: study of mechanical, thermal and erosion properties”Polymer Composites, 38 (12), 2852-2862, (Wiley), (2017). (Impact Factor: 4.7) ISSN:1548-0569. DOI: https://doi.org/10.1002/pc.23887
T. Ravinder*, S. S. Kaki*, I. N. S. S. Prabhakar*, B. V. S. K. Rao*, S. K. Swain** and R. B. N. Prasad* “Enzymatic synthesis of structured lipid based on silkworm oil and palm olein” Journal of Oil Palm Research, 29 (1), 81–87, (2017). (Impact Factor:1.5)ISSN: 1511-2780. DOI: https://doi.org/10.21894/jopr.2017.2901.09
N. Sarkar, G. Sahoo and S. K. Swain* “Nano silicon carbide embodied soy protein bionanocomposites” Polymer Composites, 38(S1), 57-65, (Wiley), (2017). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.23896
F. Mohanty and S. K. Swain* “Carbon nanotube embedded polymer composite: properties and applications” Current Organic Synthesis, 14 (2), 249-262, (Bentham Science Publishers), (2017). (Impact Factor: 2.5) ISSN: 1570-1794. DOI: https://doi.org/10.2174/1570179413666160831124314 (Invited article)
G. Sahoo, N. Sarkar and S. K. Swain*, “Antimicrobial properties of nano gold imprinted starch bionanocomposites” Polymer-Plastic Technology and Engineering, 56(3), 334–345, (Tylor & Francis) (2017) (Impact Factor: 3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2016.1185629
N. Sarkar, G. Sahoo, P. Priyadashini, S. Khuntia, J. R. Mohanty and S. K. Swain* “Fabrication of acrylic modified coconut fiber reinforced polypropylene biocomposites: study of mechanical, thermal and erosion properties”Polymer Composites, 38 (12), 2852-2862, (Wiley), (2017). (Impact Factor: 4.7) ISSN:1548-0569. DOI: https://doi.org/10.1002/pc.23887
T. Ravinder*, S. S. Kaki*, I. N. S. S. Prabhakar*, B. V. S. K. Rao*, S. K. Swain** and R. B. N. Prasad* “Enzymatic synthesis of structured lipid based on silkworm oil and palm olein” Journal of Oil Palm Research, 29 (1), 81–87, (2017). (Impact Factor:1.5)ISSN: 1511-2780. DOI: https://doi.org/10.21894/jopr.2017.2901.09
N. Sarkar, G. Sahoo and S. K. Swain* “Nano silicon carbide embodied soy protein bionanocomposites” Polymer Composites, 38(S1), 57-65, (Wiley), (2017). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.23896
F. Mohanty and S. K. Swain* “Carbon nanotube embedded polymer composite: properties and applications” Current Organic Synthesis, 14 (2), 249-262, (Bentham Science Publishers), (2017). (Impact Factor: 2.5) ISSN: 1570-1794. DOI: https://doi.org/10.2174/1570179413666160831124314 (Invited article)
G. Sahoo, N. Sarkar and S. K. Swain*, “Antimicrobial properties of nano gold imprinted starch bionanocomposites” Polymer-Plastic Technology and Engineering, 56(3), 334–345, (Tylor & Francis) (2017) (Impact Factor: 3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2016.1185629
N. Sarkar, G. Sahoo, P. Priyadashini, S. Khuntia, J. R. Mohanty and S. K. Swain* “Fabrication of acrylic modified coconut fiber reinforced polypropylene biocomposites: study of mechanical, thermal and erosion properties”Polymer Composites, 38 (12), 2852-2862, (Wiley), (2017). (Impact Factor: 4.7) ISSN:1548-0569. DOI: https://doi.org/10.1002/pc.23887
T. Ravinder*, S. S. Kaki*, I. N. S. S. Prabhakar*, B. V. S. K. Rao*, S. K. Swain** and R. B. N. Prasad* “Enzymatic synthesis of structured lipid based on silkworm oil and palm olein” Journal of Oil Palm Research, 29 (1), 81–87, (2017). (Impact Factor:1.5)ISSN: 1511-2780. DOI: https://doi.org/10.21894/jopr.2017.2901.09
N. Sarkar, G. Sahoo and S. K. Swain* “Nano silicon carbide embodied soy protein bionanocomposites” Polymer Composites, 38(S1), 57-65, (Wiley), (2017). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.23896
S. K. Swain*, G. C. Pradhan, S. Dash, F. Mohanty and L. Behera “Preparation and characterization of bionanocomposites based on soluble starch/nano CaCO3” Polymer Composites, 39(S1), 82-89, (Wiley), (2017). (Impact Factor: 4.7) ISSN:1548-0569. DOI: https://doi.org/10.1002/pc.24326
G. Sahoo, N. Sarkar, D. Sahu and S. K. Swain* “Nano gold decorated reduced graphene oxide wrapped polymethylmethacrylate for supercapacitor applications” RSC Advances, 7, 2137-2150, (RSC), (2017). (Impact Factor: 4.6) ISSN: 2046-2069. DOI: https://doi.org/10.1039/c6ra26930c
S. Gantayat, N. Sarkar, D. Rout, S. K. Swain* “Design of carbon nanofiber embedded conducting epoxy resin” Materials Chemistry and Physics, 186, 29-35, (Elsevier), (2017). (Impact Factor:5.0) ISSN: 0254-0584. DOI: https://doi.org/10.1016/j.matchemphys.2016.09.020
D. Sahoo, N. Sarkar G. Sahoo, P. Mohapatra, and S. K. Swain* “Nano silver imprinted polyvinyl alcohol nanocomposites thin films for Hg2+ sensor” Sensor Actuators: B Chemical, 246, 96-107, (Elsevier), (2017). (Impact Factor: 8.4) ISSN: 0925-4005. DOI: https://doi.org/10.1016/jsnb2
F. Mohanty and S. K. Swain* “Carbon nanotube embedded polymer composite: properties and applications” Current Organic Synthesis, 14 (2), 249-262, (Bentham Science Publishers), (2017). (Impact Factor: 2.5) ISSN: 1570-1794. DOI: https://doi.org/10.2174/1570179413666160831124314 (Invited article)
G. Sahoo, N. Sarkar and S. K. Swain*, “Antimicrobial properties of nano gold imprinted starch bionanocomposites” Polymer-Plastic Technology and Engineering, 56(3), 334–345, (Tylor & Francis) (2017) (Impact Factor: 3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2016.1185629
N. Sarkar, G. Sahoo, P. Priyadashini, S. Khuntia, J. R. Mohanty and S. K. Swain* “Fabrication of acrylic modified coconut fiber reinforced polypropylene biocomposites: study of mechanical, thermal and erosion properties”Polymer Composites, 38 (12), 2852-2862, (Wiley), (2017). (Impact Factor: 4.7) ISSN:1548-0569. DOI: https://doi.org/10.1002/pc.23887
T. Ravinder*, S. S. Kaki*, I. N. S. S. Prabhakar*, B. V. S. K. Rao*, S. K. Swain** and R. B. N. Prasad* “Enzymatic synthesis of structured lipid based on silkworm oil and palm olein” Journal of Oil Palm Research, 29 (1), 81–87, (2017). (Impact Factor:1.5)ISSN: 1511-2780. DOI: https://doi.org/10.21894/jopr.2017.2901.09
N. Sarkar, G. Sahoo and S. K. Swain* “Nano silicon carbide embodied soy protein bionanocomposites” Polymer Composites, 38(S1), 57-65, (Wiley), (2017). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.23896
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
N. Sarkar, G. Sahoo, R. Das, G. Prusty and S. K. Swain* “Carbon quantum dot tailored calcium alginate hydrogel for pH responsive controlled delivery of vancomycin” European Journal of Pharmaceutical Sciences, 109, 359-371, (Elsevier), (2017). (Impact Factor: 4.7) ISSN:0928-0987. DOI: https://doi.org/10.1016/j.ejps.2017.08.015
S. K. Swain*, G. C. Pradhan, S. Dash, F. Mohanty and L. Behera “Preparation and characterization of bionanocomposites based on soluble starch/nano CaCO3” Polymer Composites, 39(S1), 82-89, (Wiley), (2017). (Impact Factor: 4.7) ISSN:1548-0569. DOI: https://doi.org/10.1002/pc.24326
G. Sahoo, N. Sarkar, D. Sahu and S. K. Swain* “Nano gold decorated reduced graphene oxide wrapped polymethylmethacrylate for supercapacitor applications” RSC Advances, 7, 2137-2150, (RSC), (2017). (Impact Factor: 4.6) ISSN: 2046-2069. DOI: https://doi.org/10.1039/c6ra26930c
S. Gantayat, N. Sarkar, D. Rout, S. K. Swain* “Design of carbon nanofiber embedded conducting epoxy resin” Materials Chemistry and Physics, 186, 29-35, (Elsevier), (2017). (Impact Factor:5.0) ISSN: 0254-0584. DOI: https://doi.org/10.1016/j.matchemphys.2016.09.020
D. Sahoo, N. Sarkar G. Sahoo, P. Mohapatra, and S. K. Swain* “Nano silver imprinted polyvinyl alcohol nanocomposites thin films for Hg2+ sensor” Sensor Actuators: B Chemical, 246, 96-107, (Elsevier), (2017). (Impact Factor: 8.4) ISSN: 0925-4005. DOI: https://doi.org/10.1016/jsnb2
F. Mohanty and S. K. Swain* “Carbon nanotube embedded polymer composite: properties and applications” Current Organic Synthesis, 14 (2), 249-262, (Bentham Science Publishers), (2017). (Impact Factor: 2.5) ISSN: 1570-1794. DOI: https://doi.org/10.2174/1570179413666160831124314 (Invited article)
G. Sahoo, N. Sarkar and S. K. Swain*, “Antimicrobial properties of nano gold imprinted starch bionanocomposites” Polymer-Plastic Technology and Engineering, 56(3), 334–345, (Tylor & Francis) (2017) (Impact Factor: 3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2016.1185629
N. Sarkar, G. Sahoo, P. Priyadashini, S. Khuntia, J. R. Mohanty and S. K. Swain* “Fabrication of acrylic modified coconut fiber reinforced polypropylene biocomposites: study of mechanical, thermal and erosion properties”Polymer Composites, 38 (12), 2852-2862, (Wiley), (2017). (Impact Factor: 4.7) ISSN:1548-0569. DOI: https://doi.org/10.1002/pc.23887
T. Ravinder*, S. S. Kaki*, I. N. S. S. Prabhakar*, B. V. S. K. Rao*, S. K. Swain** and R. B. N. Prasad* “Enzymatic synthesis of structured lipid based on silkworm oil and palm olein” Journal of Oil Palm Research, 29 (1), 81–87, (2017). (Impact Factor:1.5)ISSN: 1511-2780. DOI: https://doi.org/10.21894/jopr.2017.2901.09
N. Sarkar, G. Sahoo and S. K. Swain* “Nano silicon carbide embodied soy protein bionanocomposites” Polymer Composites, 38(S1), 57-65, (Wiley), (2017). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.23896
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
N. Sarkar, G. Sahoo, R. Das, G. Prusty and S. K. Swain* “Carbon quantum dot tailored calcium alginate hydrogel for pH responsive controlled delivery of vancomycin” European Journal of Pharmaceutical Sciences, 109, 359-371, (Elsevier), (2017). (Impact Factor: 4.7) ISSN:0928-0987. DOI: https://doi.org/10.1016/j.ejps.2017.08.015
S. K. Swain*, G. C. Pradhan, S. Dash, F. Mohanty and L. Behera “Preparation and characterization of bionanocomposites based on soluble starch/nano CaCO3” Polymer Composites, 39(S1), 82-89, (Wiley), (2017). (Impact Factor: 4.7) ISSN:1548-0569. DOI: https://doi.org/10.1002/pc.24326
G. Sahoo, N. Sarkar, D. Sahu and S. K. Swain* “Nano gold decorated reduced graphene oxide wrapped polymethylmethacrylate for supercapacitor applications” RSC Advances, 7, 2137-2150, (RSC), (2017). (Impact Factor: 4.6) ISSN: 2046-2069. DOI: https://doi.org/10.1039/c6ra26930c
S. Gantayat, N. Sarkar, D. Rout, S. K. Swain* “Design of carbon nanofiber embedded conducting epoxy resin” Materials Chemistry and Physics, 186, 29-35, (Elsevier), (2017). (Impact Factor:5.0) ISSN: 0254-0584. DOI: https://doi.org/10.1016/j.matchemphys.2016.09.020
D. Sahoo, N. Sarkar G. Sahoo, P. Mohapatra, and S. K. Swain* “Nano silver imprinted polyvinyl alcohol nanocomposites thin films for Hg2+ sensor” Sensor Actuators: B Chemical, 246, 96-107, (Elsevier), (2017). (Impact Factor: 8.4) ISSN: 0925-4005. DOI: https://doi.org/10.1016/jsnb2
F. Mohanty and S. K. Swain* “Carbon nanotube embedded polymer composite: properties and applications” Current Organic Synthesis, 14 (2), 249-262, (Bentham Science Publishers), (2017). (Impact Factor: 2.5) ISSN: 1570-1794. DOI: https://doi.org/10.2174/1570179413666160831124314 (Invited article)
G. Sahoo, N. Sarkar and S. K. Swain*, “Antimicrobial properties of nano gold imprinted starch bionanocomposites” Polymer-Plastic Technology and Engineering, 56(3), 334–345, (Tylor & Francis) (2017) (Impact Factor: 3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2016.1185629
N. Sarkar, G. Sahoo, P. Priyadashini, S. Khuntia, J. R. Mohanty and S. K. Swain* “Fabrication of acrylic modified coconut fiber reinforced polypropylene biocomposites: study of mechanical, thermal and erosion properties”Polymer Composites, 38 (12), 2852-2862, (Wiley), (2017). (Impact Factor: 4.7) ISSN:1548-0569. DOI: https://doi.org/10.1002/pc.23887
T. Ravinder*, S. S. Kaki*, I. N. S. S. Prabhakar*, B. V. S. K. Rao*, S. K. Swain** and R. B. N. Prasad* “Enzymatic synthesis of structured lipid based on silkworm oil and palm olein” Journal of Oil Palm Research, 29 (1), 81–87, (2017). (Impact Factor:1.5)ISSN: 1511-2780. DOI: https://doi.org/10.21894/jopr.2017.2901.09
N. Sarkar, G. Sahoo and S. K. Swain* “Nano silicon carbide embodied soy protein bionanocomposites” Polymer Composites, 38(S1), 57-65, (Wiley), (2017). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.23896
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
N. Sarkar, G. Sahoo, R. Das, G. Prusty and S. K. Swain* “Carbon quantum dot tailored calcium alginate hydrogel for pH responsive controlled delivery of vancomycin” European Journal of Pharmaceutical Sciences, 109, 359-371, (Elsevier), (2017). (Impact Factor: 4.7) ISSN:0928-0987. DOI: https://doi.org/10.1016/j.ejps.2017.08.015
S. K. Swain*, G. C. Pradhan, S. Dash, F. Mohanty and L. Behera “Preparation and characterization of bionanocomposites based on soluble starch/nano CaCO3” Polymer Composites, 39(S1), 82-89, (Wiley), (2017). (Impact Factor: 4.7) ISSN:1548-0569. DOI: https://doi.org/10.1002/pc.24326
G. Sahoo, N. Sarkar, D. Sahu and S. K. Swain* “Nano gold decorated reduced graphene oxide wrapped polymethylmethacrylate for supercapacitor applications” RSC Advances, 7, 2137-2150, (RSC), (2017). (Impact Factor: 4.6) ISSN: 2046-2069. DOI: https://doi.org/10.1039/c6ra26930c
S. Gantayat, N. Sarkar, D. Rout, S. K. Swain* “Design of carbon nanofiber embedded conducting epoxy resin” Materials Chemistry and Physics, 186, 29-35, (Elsevier), (2017). (Impact Factor:5.0) ISSN: 0254-0584. DOI: https://doi.org/10.1016/j.matchemphys.2016.09.020
D. Sahoo, N. Sarkar G. Sahoo, P. Mohapatra, and S. K. Swain* “Nano silver imprinted polyvinyl alcohol nanocomposites thin films for Hg2+ sensor” Sensor Actuators: B Chemical, 246, 96-107, (Elsevier), (2017). (Impact Factor: 8.4) ISSN: 0925-4005. DOI: https://doi.org/10.1016/jsnb2
F. Mohanty and S. K. Swain* “Carbon nanotube embedded polymer composite: properties and applications” Current Organic Synthesis, 14 (2), 249-262, (Bentham Science Publishers), (2017). (Impact Factor: 2.5) ISSN: 1570-1794. DOI: https://doi.org/10.2174/1570179413666160831124314 (Invited article)
G. Sahoo, N. Sarkar and S. K. Swain*, “Antimicrobial properties of nano gold imprinted starch bionanocomposites” Polymer-Plastic Technology and Engineering, 56(3), 334–345, (Tylor & Francis) (2017) (Impact Factor: 3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2016.1185629
N. Sarkar, G. Sahoo, P. Priyadashini, S. Khuntia, J. R. Mohanty and S. K. Swain* “Fabrication of acrylic modified coconut fiber reinforced polypropylene biocomposites: study of mechanical, thermal and erosion properties”Polymer Composites, 38 (12), 2852-2862, (Wiley), (2017). (Impact Factor: 4.7) ISSN:1548-0569. DOI: https://doi.org/10.1002/pc.23887
T. Ravinder*, S. S. Kaki*, I. N. S. S. Prabhakar*, B. V. S. K. Rao*, S. K. Swain** and R. B. N. Prasad* “Enzymatic synthesis of structured lipid based on silkworm oil and palm olein” Journal of Oil Palm Research, 29 (1), 81–87, (2017). (Impact Factor:1.5)ISSN: 1511-2780. DOI: https://doi.org/10.21894/jopr.2017.2901.09
N. Sarkar, G. Sahoo and S. K. Swain* “Nano silicon carbide embodied soy protein bionanocomposites” Polymer Composites, 38(S1), 57-65, (Wiley), (2017). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.23896
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
N. Sarkar, G. Sahoo, R. Das, G. Prusty and S. K. Swain* “Carbon quantum dot tailored calcium alginate hydrogel for pH responsive controlled delivery of vancomycin” European Journal of Pharmaceutical Sciences, 109, 359-371, (Elsevier), (2017). (Impact Factor: 4.7) ISSN:0928-0987. DOI: https://doi.org/10.1016/j.ejps.2017.08.015
S. K. Swain*, G. C. Pradhan, S. Dash, F. Mohanty and L. Behera “Preparation and characterization of bionanocomposites based on soluble starch/nano CaCO3” Polymer Composites, 39(S1), 82-89, (Wiley), (2017). (Impact Factor: 4.7) ISSN:1548-0569. DOI: https://doi.org/10.1002/pc.24326
G. Sahoo, N. Sarkar, D. Sahu and S. K. Swain* “Nano gold decorated reduced graphene oxide wrapped polymethylmethacrylate for supercapacitor applications” RSC Advances, 7, 2137-2150, (RSC), (2017). (Impact Factor: 4.6) ISSN: 2046-2069. DOI: https://doi.org/10.1039/c6ra26930c
S. Gantayat, N. Sarkar, D. Rout, S. K. Swain* “Design of carbon nanofiber embedded conducting epoxy resin” Materials Chemistry and Physics, 186, 29-35, (Elsevier), (2017). (Impact Factor:5.0) ISSN: 0254-0584. DOI: https://doi.org/10.1016/j.matchemphys.2016.09.020
D. Sahoo, N. Sarkar G. Sahoo, P. Mohapatra, and S. K. Swain* “Nano silver imprinted polyvinyl alcohol nanocomposites thin films for Hg2+ sensor” Sensor Actuators: B Chemical, 246, 96-107, (Elsevier), (2017). (Impact Factor: 8.4) ISSN: 0925-4005. DOI: https://doi.org/10.1016/jsnb2
F. Mohanty and S. K. Swain* “Carbon nanotube embedded polymer composite: properties and applications” Current Organic Synthesis, 14 (2), 249-262, (Bentham Science Publishers), (2017). (Impact Factor: 2.5) ISSN: 1570-1794. DOI: https://doi.org/10.2174/1570179413666160831124314 (Invited article)
G. Sahoo, N. Sarkar and S. K. Swain*, “Antimicrobial properties of nano gold imprinted starch bionanocomposites” Polymer-Plastic Technology and Engineering, 56(3), 334–345, (Tylor & Francis) (2017) (Impact Factor: 3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2016.1185629
N. Sarkar, G. Sahoo, P. Priyadashini, S. Khuntia, J. R. Mohanty and S. K. Swain* “Fabrication of acrylic modified coconut fiber reinforced polypropylene biocomposites: study of mechanical, thermal and erosion properties”Polymer Composites, 38 (12), 2852-2862, (Wiley), (2017). (Impact Factor: 4.7) ISSN:1548-0569. DOI: https://doi.org/10.1002/pc.23887
T. Ravinder*, S. S. Kaki*, I. N. S. S. Prabhakar*, B. V. S. K. Rao*, S. K. Swain** and R. B. N. Prasad* “Enzymatic synthesis of structured lipid based on silkworm oil and palm olein” Journal of Oil Palm Research, 29 (1), 81–87, (2017). (Impact Factor:1.5)ISSN: 1511-2780. DOI: https://doi.org/10.21894/jopr.2017.2901.09
N. Sarkar, G. Sahoo and S. K. Swain* “Nano silicon carbide embodied soy protein bionanocomposites” Polymer Composites, 38(S1), 57-65, (Wiley), (2017). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.23896
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
N. Sarkar, G. Sahoo, R. Das, G. Prusty and S. K. Swain* “Carbon quantum dot tailored calcium alginate hydrogel for pH responsive controlled delivery of vancomycin” European Journal of Pharmaceutical Sciences, 109, 359-371, (Elsevier), (2017). (Impact Factor: 4.7) ISSN:0928-0987. DOI: https://doi.org/10.1016/j.ejps.2017.08.015
S. K. Swain*, G. C. Pradhan, S. Dash, F. Mohanty and L. Behera “Preparation and characterization of bionanocomposites based on soluble starch/nano CaCO3” Polymer Composites, 39(S1), 82-89, (Wiley), (2017). (Impact Factor: 4.7) ISSN:1548-0569. DOI: https://doi.org/10.1002/pc.24326
G. Sahoo, N. Sarkar, D. Sahu and S. K. Swain* “Nano gold decorated reduced graphene oxide wrapped polymethylmethacrylate for supercapacitor applications” RSC Advances, 7, 2137-2150, (RSC), (2017). (Impact Factor: 4.6) ISSN: 2046-2069. DOI: https://doi.org/10.1039/c6ra26930c
S. Gantayat, N. Sarkar, D. Rout, S. K. Swain* “Design of carbon nanofiber embedded conducting epoxy resin” Materials Chemistry and Physics, 186, 29-35, (Elsevier), (2017). (Impact Factor:5.0) ISSN: 0254-0584. DOI: https://doi.org/10.1016/j.matchemphys.2016.09.020
D. Sahoo, N. Sarkar G. Sahoo, P. Mohapatra, and S. K. Swain* “Nano silver imprinted polyvinyl alcohol nanocomposites thin films for Hg2+ sensor” Sensor Actuators: B Chemical, 246, 96-107, (Elsevier), (2017). (Impact Factor: 8.4) ISSN: 0925-4005. DOI: https://doi.org/10.1016/jsnb2
F. Mohanty and S. K. Swain* “Carbon nanotube embedded polymer composite: properties and applications” Current Organic Synthesis, 14 (2), 249-262, (Bentham Science Publishers), (2017). (Impact Factor: 2.5) ISSN: 1570-1794. DOI: https://doi.org/10.2174/1570179413666160831124314 (Invited article)
G. Sahoo, N. Sarkar and S. K. Swain*, “Antimicrobial properties of nano gold imprinted starch bionanocomposites” Polymer-Plastic Technology and Engineering, 56(3), 334–345, (Tylor & Francis) (2017) (Impact Factor: 3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2016.1185629
N. Sarkar, G. Sahoo, P. Priyadashini, S. Khuntia, J. R. Mohanty and S. K. Swain* “Fabrication of acrylic modified coconut fiber reinforced polypropylene biocomposites: study of mechanical, thermal and erosion properties”Polymer Composites, 38 (12), 2852-2862, (Wiley), (2017). (Impact Factor: 4.7) ISSN:1548-0569. DOI: https://doi.org/10.1002/pc.23887
T. Ravinder*, S. S. Kaki*, I. N. S. S. Prabhakar*, B. V. S. K. Rao*, S. K. Swain** and R. B. N. Prasad* “Enzymatic synthesis of structured lipid based on silkworm oil and palm olein” Journal of Oil Palm Research, 29 (1), 81–87, (2017). (Impact Factor:1.5)ISSN: 1511-2780. DOI: https://doi.org/10.21894/jopr.2017.2901.09
N. Sarkar, G. Sahoo and S. K. Swain* “Nano silicon carbide embodied soy protein bionanocomposites” Polymer Composites, 38(S1), 57-65, (Wiley), (2017). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.23896
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
N. Sarkar, G. Sahoo, R. Das, G. Prusty and S. K. Swain* “Carbon quantum dot tailored calcium alginate hydrogel for pH responsive controlled delivery of vancomycin” European Journal of Pharmaceutical Sciences, 109, 359-371, (Elsevier), (2017). (Impact Factor: 4.7) ISSN:0928-0987. DOI: https://doi.org/10.1016/j.ejps.2017.08.015
S. K. Swain*, G. C. Pradhan, S. Dash, F. Mohanty and L. Behera “Preparation and characterization of bionanocomposites based on soluble starch/nano CaCO3” Polymer Composites, 39(S1), 82-89, (Wiley), (2017). (Impact Factor: 4.7) ISSN:1548-0569. DOI: https://doi.org/10.1002/pc.24326
G. Sahoo, N. Sarkar, D. Sahu and S. K. Swain* “Nano gold decorated reduced graphene oxide wrapped polymethylmethacrylate for supercapacitor applications” RSC Advances, 7, 2137-2150, (RSC), (2017). (Impact Factor: 4.6) ISSN: 2046-2069. DOI: https://doi.org/10.1039/c6ra26930c
S. Gantayat, N. Sarkar, D. Rout, S. K. Swain* “Design of carbon nanofiber embedded conducting epoxy resin” Materials Chemistry and Physics, 186, 29-35, (Elsevier), (2017). (Impact Factor:5.0) ISSN: 0254-0584. DOI: https://doi.org/10.1016/j.matchemphys.2016.09.020
D. Sahoo, N. Sarkar G. Sahoo, P. Mohapatra, and S. K. Swain* “Nano silver imprinted polyvinyl alcohol nanocomposites thin films for Hg2+ sensor” Sensor Actuators: B Chemical, 246, 96-107, (Elsevier), (2017). (Impact Factor: 8.4) ISSN: 0925-4005. DOI: https://doi.org/10.1016/jsnb2
F. Mohanty and S. K. Swain* “Carbon nanotube embedded polymer composite: properties and applications” Current Organic Synthesis, 14 (2), 249-262, (Bentham Science Publishers), (2017). (Impact Factor: 2.5) ISSN: 1570-1794. DOI: https://doi.org/10.2174/1570179413666160831124314 (Invited article)
G. Sahoo, N. Sarkar and S. K. Swain*, “Antimicrobial properties of nano gold imprinted starch bionanocomposites” Polymer-Plastic Technology and Engineering, 56(3), 334–345, (Tylor & Francis) (2017) (Impact Factor: 3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2016.1185629
N. Sarkar, G. Sahoo, P. Priyadashini, S. Khuntia, J. R. Mohanty and S. K. Swain* “Fabrication of acrylic modified coconut fiber reinforced polypropylene biocomposites: study of mechanical, thermal and erosion properties”Polymer Composites, 38 (12), 2852-2862, (Wiley), (2017). (Impact Factor: 4.7) ISSN:1548-0569. DOI: https://doi.org/10.1002/pc.23887
T. Ravinder*, S. S. Kaki*, I. N. S. S. Prabhakar*, B. V. S. K. Rao*, S. K. Swain** and R. B. N. Prasad* “Enzymatic synthesis of structured lipid based on silkworm oil and palm olein” Journal of Oil Palm Research, 29 (1), 81–87, (2017). (Impact Factor:1.5)ISSN: 1511-2780. DOI: https://doi.org/10.21894/jopr.2017.2901.09
N. Sarkar, G. Sahoo and S. K. Swain* “Nano silicon carbide embodied soy protein bionanocomposites” Polymer Composites, 38(S1), 57-65, (Wiley), (2017). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.23896
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
N. Sarkar, G. Sahoo, R. Das, G. Prusty and S. K. Swain* “Carbon quantum dot tailored calcium alginate hydrogel for pH responsive controlled delivery of vancomycin” European Journal of Pharmaceutical Sciences, 109, 359-371, (Elsevier), (2017). (Impact Factor: 4.7) ISSN:0928-0987. DOI: https://doi.org/10.1016/j.ejps.2017.08.015
S. K. Swain*, G. C. Pradhan, S. Dash, F. Mohanty and L. Behera “Preparation and characterization of bionanocomposites based on soluble starch/nano CaCO3” Polymer Composites, 39(S1), 82-89, (Wiley), (2017). (Impact Factor: 4.7) ISSN:1548-0569. DOI: https://doi.org/10.1002/pc.24326
G. Sahoo, N. Sarkar, D. Sahu and S. K. Swain* “Nano gold decorated reduced graphene oxide wrapped polymethylmethacrylate for supercapacitor applications” RSC Advances, 7, 2137-2150, (RSC), (2017). (Impact Factor: 4.6) ISSN: 2046-2069. DOI: https://doi.org/10.1039/c6ra26930c
S. Gantayat, N. Sarkar, D. Rout, S. K. Swain* “Design of carbon nanofiber embedded conducting epoxy resin” Materials Chemistry and Physics, 186, 29-35, (Elsevier), (2017). (Impact Factor:5.0) ISSN: 0254-0584. DOI: https://doi.org/10.1016/j.matchemphys.2016.09.020
D. Sahoo, N. Sarkar G. Sahoo, P. Mohapatra, and S. K. Swain* “Nano silver imprinted polyvinyl alcohol nanocomposites thin films for Hg2+ sensor” Sensor Actuators: B Chemical, 246, 96-107, (Elsevier), (2017). (Impact Factor: 8.4) ISSN: 0925-4005. DOI: https://doi.org/10.1016/jsnb2
F. Mohanty and S. K. Swain* “Carbon nanotube embedded polymer composite: properties and applications” Current Organic Synthesis, 14 (2), 249-262, (Bentham Science Publishers), (2017). (Impact Factor: 2.5) ISSN: 1570-1794. DOI: https://doi.org/10.2174/1570179413666160831124314 (Invited article)
G. Sahoo, N. Sarkar and S. K. Swain*, “Antimicrobial properties of nano gold imprinted starch bionanocomposites” Polymer-Plastic Technology and Engineering, 56(3), 334–345, (Tylor & Francis) (2017) (Impact Factor: 3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2016.1185629
N. Sarkar, G. Sahoo, P. Priyadashini, S. Khuntia, J. R. Mohanty and S. K. Swain* “Fabrication of acrylic modified coconut fiber reinforced polypropylene biocomposites: study of mechanical, thermal and erosion properties”Polymer Composites, 38 (12), 2852-2862, (Wiley), (2017). (Impact Factor: 4.7) ISSN:1548-0569. DOI: https://doi.org/10.1002/pc.23887
T. Ravinder*, S. S. Kaki*, I. N. S. S. Prabhakar*, B. V. S. K. Rao*, S. K. Swain** and R. B. N. Prasad* “Enzymatic synthesis of structured lipid based on silkworm oil and palm olein” Journal of Oil Palm Research, 29 (1), 81–87, (2017). (Impact Factor:1.5)ISSN: 1511-2780. DOI: https://doi.org/10.21894/jopr.2017.2901.09
N. Sarkar, G. Sahoo and S. K. Swain* “Nano silicon carbide embodied soy protein bionanocomposites” Polymer Composites, 38(S1), 57-65, (Wiley), (2017). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.23896
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
N. Sarkar, G. Sahoo, R. Das, G. Prusty and S. K. Swain* “Carbon quantum dot tailored calcium alginate hydrogel for pH responsive controlled delivery of vancomycin” European Journal of Pharmaceutical Sciences, 109, 359-371, (Elsevier), (2017). (Impact Factor: 4.7) ISSN:0928-0987. DOI: https://doi.org/10.1016/j.ejps.2017.08.015
S. K. Swain*, G. C. Pradhan, S. Dash, F. Mohanty and L. Behera “Preparation and characterization of bionanocomposites based on soluble starch/nano CaCO3” Polymer Composites, 39(S1), 82-89, (Wiley), (2017). (Impact Factor: 4.7) ISSN:1548-0569. DOI: https://doi.org/10.1002/pc.24326
G. Sahoo, N. Sarkar, D. Sahu and S. K. Swain* “Nano gold decorated reduced graphene oxide wrapped polymethylmethacrylate for supercapacitor applications” RSC Advances, 7, 2137-2150, (RSC), (2017). (Impact Factor: 4.6) ISSN: 2046-2069. DOI: https://doi.org/10.1039/c6ra26930c
S. Gantayat, N. Sarkar, D. Rout, S. K. Swain* “Design of carbon nanofiber embedded conducting epoxy resin” Materials Chemistry and Physics, 186, 29-35, (Elsevier), (2017). (Impact Factor:5.0) ISSN: 0254-0584. DOI: https://doi.org/10.1016/j.matchemphys.2016.09.020
D. Sahoo, N. Sarkar G. Sahoo, P. Mohapatra, and S. K. Swain* “Nano silver imprinted polyvinyl alcohol nanocomposites thin films for Hg2+ sensor” Sensor Actuators: B Chemical, 246, 96-107, (Elsevier), (2017). (Impact Factor: 8.4) ISSN: 0925-4005. DOI: https://doi.org/10.1016/jsnb2
F. Mohanty and S. K. Swain* “Carbon nanotube embedded polymer composite: properties and applications” Current Organic Synthesis, 14 (2), 249-262, (Bentham Science Publishers), (2017). (Impact Factor: 2.5) ISSN: 1570-1794. DOI: https://doi.org/10.2174/1570179413666160831124314 (Invited article)
G. Sahoo, N. Sarkar and S. K. Swain*, “Antimicrobial properties of nano gold imprinted starch bionanocomposites” Polymer-Plastic Technology and Engineering, 56(3), 334–345, (Tylor & Francis) (2017) (Impact Factor: 3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2016.1185629
N. Sarkar, G. Sahoo, P. Priyadashini, S. Khuntia, J. R. Mohanty and S. K. Swain* “Fabrication of acrylic modified coconut fiber reinforced polypropylene biocomposites: study of mechanical, thermal and erosion properties”Polymer Composites, 38 (12), 2852-2862, (Wiley), (2017). (Impact Factor: 4.7) ISSN:1548-0569. DOI: https://doi.org/10.1002/pc.23887
T. Ravinder*, S. S. Kaki*, I. N. S. S. Prabhakar*, B. V. S. K. Rao*, S. K. Swain** and R. B. N. Prasad* “Enzymatic synthesis of structured lipid based on silkworm oil and palm olein” Journal of Oil Palm Research, 29 (1), 81–87, (2017). (Impact Factor:1.5)ISSN: 1511-2780. DOI: https://doi.org/10.21894/jopr.2017.2901.09
N. Sarkar, G. Sahoo and S. K. Swain* “Nano silicon carbide embodied soy protein bionanocomposites” Polymer Composites, 38(S1), 57-65, (Wiley), (2017). (Impact Factor: 4.7) ISSN: 1548-0569. DOI: https://doi.org/10.1002/pc.23896
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
N. Sarkar, G. Sahoo, R. Das, G. Prusty and S. K. Swain* “Carbon quantum dot tailored calcium alginate hydrogel for pH responsive controlled delivery of vancomycin” European Journal of Pharmaceutical Sciences, 109, 359-371, (Elsevier), (2017). (Impact Factor: 4.7) ISSN:0928-0987. DOI: https://doi.org/10.1016/j.ejps.2017.08.015
S. K. Swain*, G. C. Pradhan, S. Dash, F. Mohanty and L. Behera “Preparation and characterization of bionanocomposites based on soluble starch/nano CaCO3” Polymer Composites, 39(S1), 82-89, (Wiley), (2017). (Impact Factor: 4.7) ISSN:1548-0569. DOI: https://doi.org/10.1002/pc.24326
G. Sahoo, N. Sarkar, D. Sahu and S. K. Swain* “Nano gold decorated reduced graphene oxide wrapped polymethylmethacrylate for supercapacitor applications” RSC Advances, 7, 2137-2150, (RSC), (2017). (Impact Factor: 4.6) ISSN: 2046-2069. DOI: https://doi.org/10.1039/c6ra26930c
S. Gantayat, N. Sarkar, D. Rout, S. K. Swain* “Design of carbon nanofiber embedded conducting epoxy resin” Materials Chemistry and Physics, 186, 29-35, (Elsevier), (2017). (Impact Factor:5.0) ISSN: 0254-0584. DOI: https://doi.org/10.1016/j.matchemphys.2016.09.020
D. Sahoo, N. Sarkar G. Sahoo, P. Mohapatra, and S. K. Swain* “Nano silver imprinted polyvinyl alcohol nanocomposites thin films for Hg2+ sensor” Sensor Actuators: B Chemical, 246, 96-107, (Elsevier), (2017). (Impact Factor: 8.4) ISSN: 0925-4005. DOI: https://doi.org/10.1016/jsnb2
F. Mohanty and S. K. Swain* “Carbon nanotube embedded polymer composite: properties and applications” Current Organic Synthesis, 14 (2), 249-262, (Bentham Science Publishers), (2017). (Impact Factor: 2.5) ISSN: 1570-1794. DOI: https://doi.org/10.2174/1570179413666160831124314 (Invited article)
G. Sahoo, N. Sarkar and S. K. Swain*, “Antimicrobial properties of nano gold imprinted starch bionanocomposites” Polymer-Plastic Technology and Engineering, 56(3), 334–345, (Tylor & Francis) (2017) (Impact Factor: 3.0) ISSN: 2574-089X. DOI: https://doi.org/10.1080/03602559.2016.1185629
N. Sarkar, G. Sahoo, P. Priyadashini, S. Khuntia, J. R. Mohanty and S. K. Swain* “Fabrication of acrylic modified coconut fiber reinforced polypropylene biocomposites: study of mechanical, thermal and erosion properties”Polymer Composites, 38 (12), 2852-2862, (Wiley), (2017). (Impact Factor: 4.7) ISSN:1548-0569. DOI: https://doi.org/10.1002/pc.23887
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
N. Sarkar, G. Sahoo, R. Das, G. Prusty and S. K. Swain* “Carbon quantum dot tailored calcium alginate hydrogel for pH responsive controlled delivery of vancomycin” European Journal of Pharmaceutical Sciences, 109, 359-371, (Elsevier), (2017). (Impact Factor: 4.7) ISSN:0928-0987. DOI: https://doi.org/10.1016/j.ejps.2017.08.015
S. K. Swain*, G. C. Pradhan, S. Dash, F. Mohanty and L. Behera “Preparation and characterization of bionanocomposites based on soluble starch/nano CaCO3” Polymer Composites, 39(S1), 82-89, (Wiley), (2017). (Impact Factor: 4.7) ISSN:1548-0569. DOI: https://doi.org/10.1002/pc.24326
74. G. Sahoo, N. Sarkar, D. Sahu and S. K. Swain* “Nano gold decorated reduced graphene oxide wrapped polymethylmethacrylate for supercapacitor applications” RSC Advances, 7, 2137-2150, (RSC), (2017). (Impact Factor: 4.6) ISSN: 2046-2069. DOI: https://doi.org/10.1039/c6ra26930c
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
N. Sarkar, G. Sahoo, R. Das, G. Prusty and S. K. Swain* “Carbon quantum dot tailored calcium alginate hydrogel for pH responsive controlled delivery of vancomycin” European Journal of Pharmaceutical Sciences, 109, 359-371, (Elsevier), (2017). (Impact Factor: 4.7) ISSN:0928-0987. DOI: https://doi.org/10.1016/j.ejps.2017.08.015
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
Padhi, P. K. â€œIndian Campus Novels: An Emerging Genre in Literary Writingâ€ in IOSR Journal of Humanities and Social Science, Volume-22, Issue-II, Ver.7, November 2017, ISSN: 2279-0845, Page no. 1-8.
Padhi, P. K. â€œAn Analysis of the Teaching Objectives of English for Communication Prescribed for Engineering Students Under Veer Surendra Sai University of Technologyâ€ in Researchers World, an International refereed research journal, Vol.â€“ VIII, Issue â€“2(10), April 2017, ISSN: 2231- 4172, Page no-56.
Padhi, P. K. â€œIndian Campus Novels: An Emerging Genre in Literary Writingâ€ in IOSR Journal of Humanities and Social Science, Volume-22, Issue-II, Ver.7, November 2017, ISSN: 2279-0845, Page no. 1-8.
Padhi, P. K. â€œAn Analysis of the Teaching Objectives of English for Communication Prescribed for Engineering Students Under Veer Surendra Sai University of Technologyâ€ in Researchers World, an International refereed research journal, Vol.â€“ VIII, Issue â€“2(10), April 2017, ISSN: 2231- 4172, Page no-56.
Padhi, P. K. â€œIndian Campus Novels: An Emerging Genre in Literary Writingâ€ in IOSR Journal of Humanities and Social Science, Volume-22, Issue-II, Ver.7, November 2017, ISSN: 2279-0845, Page no. 1-8.
Padhi, P. K. â€œAn Analysis of the Teaching Objectives of English for Communication Prescribed for Engineering Students Under Veer Surendra Sai University of Technologyâ€ in Researchers World, an International refereed research journal, Vol.â€“ VIII, Issue â€“2(10), April 2017, ISSN: 2231- 4172, Page no-56.
Padhi, P. K. â€œIndian Campus Novels: An Emerging Genre in Literary Writingâ€ in IOSR Journal of Humanities and Social Science, Volume-22, Issue-II, Ver.7, November 2017, ISSN: 2279-0845, Page no. 1-8.
Padhi, P. K. â€œAn Analysis of the Teaching Objectives of English for Communication Prescribed for Engineering Students Under Veer Surendra Sai University of Technologyâ€ in Researchers World, an International refereed research journal, Vol.â€“ VIII, Issue â€“2(10), April 2017, ISSN: 2231- 4172, Page no-56.
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
Thumu Ravinder*; Shiva Shanker Kaki*; Prabhakar, I N S S*; Rao, B V S K *; S K Swain** and Prasad, R B N* â€œEnzymatic Synthesis of Structured Lipid Based On Silkworm Oil and Palm Oleinâ€ Journal of Oil Palm Research Vol. 29 (1) 81 â€“ 87 (2017) (Impact Factor: 0.427).
N Sarkar, G Sahoo and S K Swain* â€œNano silicon carbide embodied soy protein bionanocompositesâ€ Polymer Composites (Wiley), 38 (S1) E57-E65 (2017). DOI: 10.1002/pc.23896 (Impact Factor: 2.262)
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
N. Sarkar, G Sahoo, P. Priyadashini, S Khuntia, J R Mohanty and S K Swain* â€œFabrication of acrylic modified coconut fiber reinforced polypropylene biocomposites: Study of mechanical, thermal and erosion propertiesâ€ Polymer Composites (Wiley), 38 (12) 2852-28-62 (2017). DOI: 10.1002/pc.23887 (Impact Factor: 2.262)
Thumu Ravinder*; Shiva Shanker Kaki*; Prabhakar, I N S S*; Rao, B V S K *; S K Swain** and Prasad, R B N* â€œEnzymatic Synthesis of Structured Lipid Based On Silkworm Oil and Palm Oleinâ€ Journal of Oil Palm Research Vol. 29 (1) 81 â€“ 87 (2017) (Impact Factor: 0.427).
N Sarkar, G Sahoo and S K Swain* â€œNano silicon carbide embodied soy protein bionanocompositesâ€ Polymer Composites (Wiley), 38 (S1) E57-E65 (2017). DOI: 10.1002/pc.23896 (Impact Factor: 2.262)
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
N. Sarkar, G Sahoo, P. Priyadashini, S Khuntia, J R Mohanty and S K Swain* â€œFabrication of acrylic modified coconut fiber reinforced polypropylene biocomposites: Study of mechanical, thermal and erosion propertiesâ€ Polymer Composites (Wiley), 38 (12) 2852-28-62 (2017). DOI: 10.1002/pc.23887 (Impact Factor: 2.262)
Thumu Ravinder*; Shiva Shanker Kaki*; Prabhakar, I N S S*; Rao, B V S K *; S K Swain** and Prasad, R B N* â€œEnzymatic Synthesis of Structured Lipid Based On Silkworm Oil and Palm Oleinâ€ Journal of Oil Palm Research Vol. 29 (1) 81 â€“ 87 (2017) (Impact Factor: 0.427).
N Sarkar, G Sahoo and S K Swain* â€œNano silicon carbide embodied soy protein bionanocompositesâ€ Polymer Composites (Wiley), 38 (S1) E57-E65 (2017). DOI: 10.1002/pc.23896 (Impact Factor: 2.262)
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
N. Sarkar, G Sahoo, P. Priyadashini, S Khuntia, J R Mohanty and S K Swain* â€œFabrication of acrylic modified coconut fiber reinforced polypropylene biocomposites: Study of mechanical, thermal and erosion propertiesâ€ Polymer Composites (Wiley), 38 (12) 2852-28-62 (2017). DOI: 10.1002/pc.23887 (Impact Factor: 2.262)
Thumu Ravinder*; Shiva Shanker Kaki*; Prabhakar, I N S S*; Rao, B V S K *; S K Swain** and Prasad, R B N* â€œEnzymatic Synthesis of Structured Lipid Based On Silkworm Oil and Palm Oleinâ€ Journal of Oil Palm Research Vol. 29 (1) 81 â€“ 87 (2017) (Impact Factor: 0.427).
N Sarkar, G Sahoo and S K Swain* â€œNano silicon carbide embodied soy protein bionanocompositesâ€ Polymer Composites (Wiley), 38 (S1) E57-E65 (2017). DOI: 10.1002/pc.23896 (Impact Factor: 2.262)
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
N. Sarkar, G Sahoo, P. Priyadashini, S Khuntia, J R Mohanty and S K Swain* â€œFabrication of acrylic modified coconut fiber reinforced polypropylene biocomposites: Study of mechanical, thermal and erosion propertiesâ€ Polymer Composites (Wiley), 38 (12) 2852-28-62 (2017). DOI: 10.1002/pc.23887 (Impact Factor: 2.262)
Thumu Ravinder*; Shiva Shanker Kaki*; Prabhakar, I N S S*; Rao, B V S K *; S K Swain** and Prasad, R B N* â€œEnzymatic Synthesis of Structured Lipid Based On Silkworm Oil and Palm Oleinâ€ Journal of Oil Palm Research Vol. 29 (1) 81 â€“ 87 (2017) (Impact Factor: 0.427).
N Sarkar, G Sahoo and S K Swain* â€œNano silicon carbide embodied soy protein bionanocompositesâ€ Polymer Composites (Wiley), 38 (S1) E57-E65 (2017). DOI: 10.1002/pc.23896 (Impact Factor: 2.262)
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
N. Sarkar, G Sahoo, P. Priyadashini, S Khuntia, J R Mohanty and S K Swain* â€œFabrication of acrylic modified coconut fiber reinforced polypropylene biocomposites: Study of mechanical, thermal and erosion propertiesâ€ Polymer Composites (Wiley), 38 (12) 2852-28-62 (2017). DOI: 10.1002/pc.23887 (Impact Factor: 2.262)
Thumu Ravinder*; Shiva Shanker Kaki*; Prabhakar, I N S S*; Rao, B V S K *; S K Swain** and Prasad, R B N* â€œEnzymatic Synthesis of Structured Lipid Based On Silkworm Oil and Palm Oleinâ€ Journal of Oil Palm Research Vol. 29 (1) 81 â€“ 87 (2017) (Impact Factor: 0.427).
N Sarkar, G Sahoo and S K Swain* â€œNano silicon carbide embodied soy protein bionanocompositesâ€ Polymer Composites (Wiley), 38 (S1) E57-E65 (2017). DOI: 10.1002/pc.23896 (Impact Factor: 2.262)
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
N. Sarkar, G Sahoo, P. Priyadashini, S Khuntia, J R Mohanty and S K Swain* â€œFabrication of acrylic modified coconut fiber reinforced polypropylene biocomposites: Study of mechanical, thermal and erosion propertiesâ€ Polymer Composites (Wiley), 38 (12) 2852-28-62 (2017). DOI: 10.1002/pc.23887 (Impact Factor: 2.262)
Thumu Ravinder*; Shiva Shanker Kaki*; Prabhakar, I N S S*; Rao, B V S K *; S K Swain** and Prasad, R B N* â€œEnzymatic Synthesis of Structured Lipid Based On Silkworm Oil and Palm Oleinâ€ Journal of Oil Palm Research Vol. 29 (1) 81 â€“ 87 (2017) (Impact Factor: 0.427).
N Sarkar, G Sahoo and S K Swain* â€œNano silicon carbide embodied soy protein bionanocompositesâ€ Polymer Composites (Wiley), 38 (S1) E57-E65 (2017). DOI: 10.1002/pc.23896 (Impact Factor: 2.262)
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
N. Sarkar, G Sahoo, P. Priyadashini, S Khuntia, J R Mohanty and S K Swain* â€œFabrication of acrylic modified coconut fiber reinforced polypropylene biocomposites: Study of mechanical, thermal and erosion propertiesâ€ Polymer Composites (Wiley), 38 (12) 2852-28-62 (2017). DOI: 10.1002/pc.23887 (Impact Factor: 2.262)
Thumu Ravinder*; Shiva Shanker Kaki*; Prabhakar, I N S S*; Rao, B V S K *; S K Swain** and Prasad, R B N* â€œEnzymatic Synthesis of Structured Lipid Based On Silkworm Oil and Palm Oleinâ€ Journal of Oil Palm Research Vol. 29 (1) 81 â€“ 87 (2017) (Impact Factor: 0.427).
N Sarkar, G Sahoo and S K Swain* â€œNano silicon carbide embodied soy protein bionanocompositesâ€ Polymer Composites (Wiley), 38 (S1) E57-E65 (2017). DOI: 10.1002/pc.23896 (Impact Factor: 2.262)
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
N. Sarkar, G Sahoo, P. Priyadashini, S Khuntia, J R Mohanty and S K Swain* â€œFabrication of acrylic modified coconut fiber reinforced polypropylene biocomposites: Study of mechanical, thermal and erosion propertiesâ€ Polymer Composites (Wiley), 38 (12) 2852-28-62 (2017). DOI: 10.1002/pc.23887 (Impact Factor: 2.262)
Thumu Ravinder*; Shiva Shanker Kaki*; Prabhakar, I N S S*; Rao, B V S K *; S K Swain** and Prasad, R B N* â€œEnzymatic Synthesis of Structured Lipid Based On Silkworm Oil and Palm Oleinâ€ Journal of Oil Palm Research Vol. 29 (1) 81 â€“ 87 (2017) (Impact Factor: 0.427).
N Sarkar, G Sahoo and S K Swain* â€œNano silicon carbide embodied soy protein bionanocompositesâ€ Polymer Composites (Wiley), 38 (S1) E57-E65 (2017). DOI: 10.1002/pc.23896 (Impact Factor: 2.262)
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
N. Sarkar, G Sahoo, P. Priyadashini, S Khuntia, J R Mohanty and S K Swain* â€œFabrication of acrylic modified coconut fiber reinforced polypropylene biocomposites: Study of mechanical, thermal and erosion propertiesâ€ Polymer Composites (Wiley), 38 (12) 2852-28-62 (2017). DOI: 10.1002/pc.23887 (Impact Factor: 2.262)
Thumu Ravinder*; Shiva Shanker Kaki*; Prabhakar, I N S S*; Rao, B V S K *; S K Swain** and Prasad, R B N* â€œEnzymatic Synthesis of Structured Lipid Based On Silkworm Oil and Palm Oleinâ€ Journal of Oil Palm Research Vol. 29 (1) 81 â€“ 87 (2017) (Impact Factor: 0.427).
N Sarkar, G Sahoo and S K Swain* â€œNano silicon carbide embodied soy protein bionanocompositesâ€ Polymer Composites (Wiley), 38 (S1) E57-E65 (2017). DOI: 10.1002/pc.23896 (Impact Factor: 2.262)
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
N. Sarkar, G Sahoo, P. Priyadashini, S Khuntia, J R Mohanty and S K Swain* â€œFabrication of acrylic modified coconut fiber reinforced polypropylene biocomposites: Study of mechanical, thermal and erosion propertiesâ€ Polymer Composites (Wiley), 38 (12) 2852-28-62 (2017). DOI: 10.1002/pc.23887 (Impact Factor: 2.262)
Thumu Ravinder*; Shiva Shanker Kaki*; Prabhakar, I N S S*; Rao, B V S K *; S K Swain** and Prasad, R B N* â€œEnzymatic Synthesis of Structured Lipid Based On Silkworm Oil and Palm Oleinâ€ Journal of Oil Palm Research Vol. 29 (1) 81 â€“ 87 (2017) (Impact Factor: 0.427).
N Sarkar, G Sahoo and S K Swain* â€œNano silicon carbide embodied soy protein bionanocompositesâ€ Polymer Composites (Wiley), 38 (S1) E57-E65 (2017). DOI: 10.1002/pc.23896 (Impact Factor: 2.262)
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
N. Sarkar, G Sahoo, P. Priyadashini, S Khuntia, J R Mohanty and S K Swain* â€œFabrication of acrylic modified coconut fiber reinforced polypropylene biocomposites: Study of mechanical, thermal and erosion propertiesâ€ Polymer Composites (Wiley), 38 (12) 2852-28-62 (2017). DOI: 10.1002/pc.23887 (Impact Factor: 2.262)
Thumu Ravinder*; Shiva Shanker Kaki*; Prabhakar, I N S S*; Rao, B V S K *; S K Swain** and Prasad, R B N* â€œEnzymatic Synthesis of Structured Lipid Based On Silkworm Oil and Palm Oleinâ€ Journal of Oil Palm Research Vol. 29 (1) 81 â€“ 87 (2017) (Impact Factor: 0.427).
N Sarkar, G Sahoo and S K Swain* â€œNano silicon carbide embodied soy protein bionanocompositesâ€ Polymer Composites (Wiley), 38 (S1) E57-E65 (2017). DOI: 10.1002/pc.23896 (Impact Factor: 2.262)
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
"An Efficient Intra-Server and Inter-Server Load Balancing Algorithm for Internet Distributed Systems", Swati Mishra, Sanjaya Ku. Panda & Satyabrata Das, International Journal of Rough Sets and Data Analysis(IJRSDA) igi-global 2017, Vol 4 Issue 1,Article 1, https://doi.org/10.4018/IJRSDA.2017100102,DOI:Â 10.4018/IJRSDA.2017100102
"A Customer-Oriented Task Scheduling for Heterogeneous Multi-cloud Environment", Sohan Ku. Pande, Sanjaya Ku. Panda & Satyabrata Das, International Journal of Cloud Applications and Computing(IJCAC) igi-global 2017, Vol 6 Issue 4, Article 1, https://doi.org/10.4018/IJCAC.2016100101,DOI:Â 10.4018/IJCAC.2016100101
"An Efficient Clustering in MANETs With Minimum Communication and Reclustering Overhead", Mohd. Yaseen Mir & Satyabrata Das, International Journal of Rough Sets and Data Analysis(IJRSDA) igi-global 2017, Vol 4 Issue 4, Article 7, https://doi.org/10.4018/IJRSDA.2017100107,DOI:Â 10.4018/IJRSDA.2017100107
"Design and Development of a Parallel Lexical Analyzer for C Language", Swagat Ku. Jena, Satyabrata Das & Satya Prakash Sahoo, International Journal of Knowledge-Based Organizations (IJKBO) igi-global 2017,Vol 8 Issue 1, Article 5, https://doi.org/10.4018/IJKBO.2018010105,DOI:Â 10.4018/IJKBO.2018010105
Biswal, T*., Panda, R. B., Prusty R. (2017) Classification, Properties and Characterization of Fly Ash ICCL Chowdhar and RSP, CPPI, International Journal of Green and Herbal Chemistry; Sec. A, .6(.4), 269-279.
Prusty, R., & Biswal, T*. (2017). Water quality assessment of Taladanda Canal in the command area of Cuttack city. International Journal of Advances in Agricultural Science and Technology, 4(8), 40-48. (Scopus).
Priyadarsini, M., Biswal, T*., Sahoo, P.K (2017). Advances in zein- based hybrid bio-nanocomposite A short review, International Journal of Development Research, 7 (9), 14929-14941
Mahapatra, T. R., Dewangan, S., Dash, S. and Panda S. K. (2017), Flexural Behavior of Functionally Graded Sandwich Plates, International Journal of Research in Mechanical Engineering and Technology, Vol. 7 (1), pp. 25-29.
Panda, S. K., Mahapatra, T. R. and Kar, V. R. (2017) Nonlinear Finite Element Solution of Post-buckling Responses of FGM Panel Structure under Elevated Thermal Load and TD and TID Properties, MATEC Web of Conferences, Vol. 109, 05005, DOI: 10.1051/matecconf/201710905005, (SCOPUS)
Mahapatra, T. R., Mehar, K., Panda, S. K., Dewangan, S. and Dash, S., (2017) Flexural Strength of Functionally Graded Nanotube Reinforced Sandwich Spherical Panel, IOP Conference Series: Materials Science and Engineering, Vol. 178, (012031) DOI: 10.1088/1757-899X/178/1/012031, (IF: 0.39) (SCOPUS)
Kataria, P. V., Panda, S. K. and Mahapatra, T. R. (2017) Effect of Skew Angle on Free Vibration Responses of Sandwich Composite Plate, International Journal of Research in Mechanical Engineering and Technology, Vol. 7 (1), pp. 21-24
Katariya, P. V., Panda, S. K. and Mahapatra, T. R. (2017) Prediction of nonlinear eigenfrequency of laminated curved sandwich structure using higher-order equivalent single-layer theory, Journal of Sandwich Structures and Materials, 21(8), 2846-2869. DOI: 10.1177/1099636215577363 (IF: 2.852). SCI
Hirwani, C. K., Panda, S. K., Mahapatra, T. R. and Mahapatra, S. S. (2017), Nonlinear transient finite-element analysis of delaminated composite shallow shell panels, AIAA Journal, Vol. 55 (5), pp. 1734-1748, DOI: 10.2514/1.J055624, (IF: 1.207) SCI.
Sharma, N., Mahapatra, T. R. and Panda, S. K. (2017), Numerical Study of Vibro-Acoustic Responses of Un-Baffled Multi-Layered Composite Structure under Various End Conditions and Experimental Validation, Latin American Journal of Solids and Structures, Vol. 14 (8), pp. 1547-1568, DOI: 10.1590/1679-78253830, (IF: 1.481, SCIE, SCOPUS).
Dutta, G., Panda, S. K., Mahapatra, T. R., and Singh, V. K. (2017), Electro-Magneto-Elastic Response of Laminated Composite Plate: A Finite Element Approach, International Journal of Applied and Computational Mathematics, Vol. 3 (3), pp. 2573–2592, DOI: 10.1007/s40819-016-0256-6, (IF: 0.653) SCIE
Kar, V. R., Mahapatra, T. R. and Panda, S. K., (2017), Effect of different temperature load on thermal postbuckling behaviour of functionally graded shallow curved shell panels, Composite Structures, Vol. 160 (15), pp. 1236-1247, DOI: 10.1016/j.compstruct.2016.10.125, (IF: 6.3) SCI
Sahoo, S. S., Mahapatra, T. R., Panda, S. K., and Singh, V. K. (2017), Numerical investigation on the nonlinear flexural behaviour of wrapped glass/epoxy laminated composite panel and experimental validation, Archive of Applied Mechanics, Vol. 87 (2), pp. 315-333, DOI: 10.1007/s00419-016-1195-8, (IF: 1.103) SCI
Hirwani, C. K., Mahapatra, T. R.,Panda, S. K., Sahoo, S. S., Singh, V. K. and Patle, B. K. (2017) Nonlinear Free Vibration Analysis of Laminated Carbon/Epoxy Curved Panels: Theoretical and Experimental Investigation, Defence Science Journal, Vol. 67, No. 2, pp. 207-218, DOI:10.14429/dsj.67.10072, (IF: 0.428), SCIE, SCOPUS.
Mehar, K., Panda, S. K., Bui, T. Q. and Mahapatra, T. R. (2017) Nonlinear thermoelastic frequency analysis of functionally graded CNT-reinforced single/doubly curved shallow shell panels by FEM, Journal of Thermal Stresses, Vol. 40 (7), pp. 899-916, DOI: 10.1080/01495739.2017.1318689 (IF: 1.364), SCI.
Mehar, K., Panda, S. K. and Mahapatra, T. R. (2017) Thermoelastic Nonlinear Frequency Analysis of CNT Reinforced Functionally Graded Sandwich Structure, European Journal of Mechanics / A Solids, Vol. 65, pp. 384-396, DOI: 10.1016/j.euromechsol.2017.05.005, (IF: 2.453) SCI
Hirwani, C. K., Panda, S. K., Mahapatra, T. R. and Mahapatra, S. S. (2017) Numerical Study and Experimental Validation of Dynamic Characteristics of Delaminated Composite Flat and Curved Shallow Shell Structure, Journal of Aerospace Engineering, Vol. 30 (5), pp. 04017045 (1-16) DOI: 10.1061/(ASCE)AS.1943-5525.0000756, (IF: 0.76), SCI.
Mahapatra, T. R., Kar, V. R., and Panda, S. K., (2017), Nonlinear thermoelastic deflection of temperature-dependent FGM curved shallow shell under nonlinear thermal loading, Journal of Thermal Stresses, Vol. 40 (9), pp. 1184-1199, DOI:10.1080/01495739.2017.1302788, (IF: 1.364). SCI
Sharma, N., Mahapatra, T. R. and Panda, S. K., (2017) Vibro-acoustic analysis of un-baffled curved composite panels with experimental validation, Structural Engineering and Mechanics, Vol. 64 (1), pp. 93-107, DOI: 10.12989/sem.2017.64.1.093 (IF: 1.114) SCI
Mehar, K., Panda, S. K., and Mahapatra, T. R. (2017) Theoretical and experimental investigation of vibration characteristic of carbon nanotube reinforced polymer composite structure, International Journal of Mechanical Sciences, Vol. 133, pp. 319-329, DOI: 10.1016/j.ijmecsci.2017.08.057 (IF: 2.481) SCI, SCIE and SCOPUS
Sharma, N., Mahapatra, T. R., Panda, S. K. (2017), Vibro-acoustic behaviour of shear deformable laminated composite flat panel using BEM and the higher order shear deformation theory, Composite Structures, Vol. 180 (15), pp. 116-129, DOI: 10.1016/j.compstruct.2017.08.012 (IF: 6.3). SCI
Katariya, P. V., Panda, S. K. and Mahapatra, T. R., (2017) Nonlinear thermal buckling behaviour of laminated composite panel structure including the stretching effect and higher-order finite element, Advances in Materials Research, Vol. 6 (4), pp. 349-361, DOI: https://doi.org/10.12989/amr.2017.6.4.349, (IF: 0.933) SCIE, SCOPUS
Swain, P. T. R., & Biswas, S., â€œInfluence of fiber surface treatments on physico-mechanical behaviour of jute/epoxy composites impregnated with aluminium oxide fillerâ€, Journal of Composite Materials, vol. 51, no. 28, pp. 3909-3922, 2017, doi: https://doi.org/10.1177/0021998317695420
Swain, P. T. R., & Biswas, S., â€œAbrasive wear behaviour of surface modified jute fiber reinforced epoxy compositesâ€, Materials Research, vol. 20, pp. 661-674, 2017, doi: https://doi.org/10.1590/1980-5373-MR-2016-0541
Swain, P. T. R., & Biswas, S., â€œEffect of moisture absorption on the mechanical properties of ceramic filled jute/epoxy hybrid compositesâ€, IOP conference series: materials science and engineering vol. 178, no. 1, pp. 1-9, 2017 doi: 10.1088/1757-899X/178/1/012010
Yashdeep, Gyan Ranjan Biswal, T. Choudhury, T. Islam, S. Mukhopadhyay, and V. Vashisht, “Design and Modeling of MEMS based Trace-level Moisture Measurement System for GIS Applications in Smart Grid Environment,” IEEE Sensors Journal, Vol. 17, No. 23, pp. 7758 – 7766, Dec. 2017. (IF: 4.325)
Padhi, P. K. â€œIndian Campus Novels: An Emerging Genre in Literary Writingâ€ in IOSR Journal of Humanities and Social Science, Volume-22, Issue-II, Ver.7, November 2017, ISSN: 2279-0845, Page no. 1-8.
Padhi, P. K. â€œAn Analysis of the Teaching Objectives of English for Communication Prescribed for Engineering Students Under Veer Surendra Sai University of Technologyâ€ in Researchers World, an International refereed research journal, Vol.â€“ VIII, Issue â€“2(10), April 2017, ISSN: 2231- 4172, Page no-56.
S Panda, BB Biswal, SD Jena, D Mishra An approach to weight optimization of a spur gear Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 232(2) 189-202
N Acharya, P Nanda, S Panda, S Acharya Analysis of properties and estimation of optimum blending ratio of blended mahua biodiesel Engineering Science and Technology, an International Journal 20 (2), 511-517
S. Kisan, S. N. Mishra, S. B. Rout. “Fractal Dimension in Medical Imaging: A Review”. International Research Journal of Engineering and Technology (IRJET),Vol. 4 Issue: 05 e-ISSN: 2395 -0056 p-ISSN: 2395-0072, , May -2017
S. Kisan, S. N. Mishra, D. Mishra. “Analysis of Tumor using Fractal Dimension”. International Journal of Advance Computing Technique and Applications (IJACTA), ISSN : 2321-4546, Vol 5, Issue 1, January- June 2017
"An Efficient Intra-Server and Inter-Server Load Balancing Algorithm for Internet Distributed Systems", Swati Mishra, Sanjaya Ku. Panda & Satyabrata Das, International Journal of Rough Sets and Data Analysis(IJRSDA) igi-global 2017, Vol 4 Issue 1,Article 1, https://doi.org/10.4018/IJRSDA.2017100102,DOI:Â 10.4018/IJRSDA.2017100102
"A Customer-Oriented Task Scheduling for Heterogeneous Multi-cloud Environment", Sohan Ku. Pande, Sanjaya Ku. Panda & Satyabrata Das, International Journal of Cloud Applications and Computing(IJCAC) igi-global 2017, Vol 6 Issue 4, Article 1, https://doi.org/10.4018/IJCAC.2016100101,DOI:Â 10.4018/IJCAC.2016100101
"An Efficient Clustering in MANETs With Minimum Communication and Reclustering Overhead", Mohd. Yaseen Mir & Satyabrata Das, International Journal of Rough Sets and Data Analysis(IJRSDA) igi-global 2017, Vol 4 Issue 4, Article 7, https://doi.org/10.4018/IJRSDA.2017100107,DOI:Â 10.4018/IJRSDA.2017100107
"Design and Development of a Parallel Lexical Analyzer for C Language", Swagat Ku. Jena, Satyabrata Das & Satya Prakash Sahoo, International Journal of Knowledge-Based Organizations (IJKBO) igi-global 2017,Vol 8 Issue 1, Article 5, https://doi.org/10.4018/IJKBO.2018010105,DOI:Â 10.4018/IJKBO.2018010105
D. Konhar, D. Mishra, “A perturbed circular monopole antenna with circular polarization for ultra-wideband applications”, International Journal of engineering and Technology, Vol. 9, No.3, pp 2479-2484, July 2017. DOI: 10.21817/ijet/2017/v9i3/170903175.
D. Konhar, D. Mishra, “Circularly polarized antenna design using microstrip-to-cpw transition for ultra-wideband applications” Journal of Telecommunication, Electronic and Computer engineering” Vol. 9, No.3, pp 193-197, Sept 2017. (SCOPUS)
Mishro, Pranaba Kumar; Agrawal, Sanjay; Dora, Lingraj; Panda, Rutuparna; , A fuzzy C-means clustering approach to HMRF-EM model for MRI brain tissue segmentation, 2017 6th International Conference on Computer Applications In Electrical Engineering-Recent Advances (CERA), Pages 371-376, IEEE
Dora, Lingraj; Agrawal, Sanjay; Panda, Rutuparna; , Gauss-Newton representation based algorithm for magnetic resonance brain image classification, International Conference on Intelligent Systems Design and Applications, Pages 294-304, Springer International Publishing Cham
Panda, Rutuparna; Agrawal, Sanjay; Samantaray, Leena; Abraham, Ajith; , An evolutionary gray gradient algorithm for multilevel thresholding of brain MR images using soft computing techniques, Applied Soft Computing, Volume 50.0, Pages 94-108, Elsevier
Dora, Lingraj; Agrawal, Sanjay; Panda, Rutuparna; Abraham, Ajith; , An evolutionary single Gabor kernel based filter approach to face recognition, Engineering Applications of Artificial Intelligence, Volume 62.0, Pages 286-301, Pergamon
Dora, Lingraj; Agrawal, Sanjay; Panda, Rutuparna; Abraham, Ajith; , State-of-the-art methods for brain tissue segmentation: A review, IEEE reviews in biomedical engineering, Volume 10.0, Pages 235-249, IEEE
Dora, Lingraj; Agrawal, Sanjay; Panda, Rutuparna; Abraham, Ajith; , Optimal breast cancer classification using Gaussâ€“Newton representation based algorithm, Expert Systems with Applications, Volume 85.0, Pages 134-145, Pergamon
Panda, Rutuparna; Agrawal, Sanjay; Sahoo, Madhusmita; Nayak, Rajashree; , A novel evolutionary rigid body docking algorithm for medical image registration, Swarm and Evolutionary Computation, Volume 33.0, Pages 108-118, Elsevier
P. L. Praveen, Ramakrishna. D. S., D. P. Ojha, UV spectral characterization of a smectic-C liquid crystal: Theoretical support to the experiment, Molecular Crystals and Liquid Crystals 643 (2017) 76–82. https://doi.org/10.1080/15421406.2016.1262702
N. Sarkar, G. Sahoo, R Das, G. Prusty and S K Swain* â€œCarbon quantum dot tailored calcium alginate hydrogel for pH responsive controlled delivery of vancomycinâ€ European Journal of Pharmaceutical Sciences (Elsevier), 109, 359-371 (2017) (Impact Factor: 3.532). doi.org/10.1016/j.ejps.2017.08.015.
S K Swain*, G C Pradhan, S. Dash, F Mohanty and L Behera â€œPreparation and characterization of bionanocomposites based on soluble starch/nano CaCO3â€ Polymer Composites (Wiley), (2017). DOI: 10.1002/pc.24326 (Impact Factor: 2.262) In Press.
Gyanaranjan Sahoo, N. Sarkar, D. Sahu and S K Swain* â€œNano Gold Decorated Reduced Graphene Oxide Wrapped Polymethylmethacrylate for Supercapacitor Applicationsâ€ RSC Advances (RSC), 7, 2137-2150 (2017). (Impact Factor: 3.049) DOI: 10.1039/c6ra26930c.
S Gantayat, N Sarkar, D Rout, SK Swain* â€œDesign of carbon nanofiber embedded conducting epoxy resinâ€ Materials Chemistry and Physics (Elsevier) 186, 29-35 (2017) doi.org/10.1016/j.matchemphys.2016.09.020 (Impact Factor: 2.781)
D. Sahoo, N. Sarkar G. Sahoo, P. Mohapatra, and S K Swain* â€œNano Silver imprinted polyvinyl alcohol nanocomposites thin films for Hg2+ sensorâ€ Sensor Actuators: B Chemical, (Elsevier) 246, 96-107 (2017) (Impact Factor: 6.393).Doi: 10.1016/jsnb2..
Fanismita Mohanty, S K Swain* â€œCarbon Nanotube Embedded Polymer Composite: Properties and Applicationsâ€ Current Organic Synthesis (Bentham Science Publishers.), 14 (2), 249-262 (2017) (Impact Factor: 1.690). DOI: 10.2174/1570179413666160831124314. (Invited article)
G Sahoo, N Sarkar and S K Swain*, â€œAntimicrobial properties of nano gold imprinted starch bionanocompositesâ€ Polymer-Plastic Technology and Engineering, (Tylor & Francis), 56(3), 334â€“345 (2017) (Impact Factor: 1.655) Doi: 10.1080/03602559.2016.1185629.
N. Sarkar, G Sahoo, P. Priyadashini, S Khuntia, J R Mohanty and S K Swain* â€œFabrication of acrylic modified coconut fiber reinforced polypropylene biocomposites: Study of mechanical, thermal and erosion propertiesâ€ Polymer Composites (Wiley), 38 (12) 2852-28-62 (2017). DOI: 10.1002/pc.23887 (Impact Factor: 2.262)
Thumu Ravinder*; Shiva Shanker Kaki*; Prabhakar, I N S S*; Rao, B V S K *; S K Swain** and Prasad, R B N* â€œEnzymatic Synthesis of Structured Lipid Based On Silkworm Oil and Palm Oleinâ€ Journal of Oil Palm Research Vol. 29 (1) 81 â€“ 87 (2017) (Impact Factor: 0.427).
N Sarkar, G Sahoo and S K Swain* â€œNano silicon carbide embodied soy protein bionanocompositesâ€ Polymer Composites (Wiley), 38 (S1) E57-E65 (2017). DOI: 10.1002/pc.23896 (Impact Factor: 2.262)
POPULAR SCIENTIFIC REPORTS S K Swain, G Sahoo, N Sarkar, and F Mohanty, â€œNovel bionanocomposite systems for packaging applicationsâ€ SPE, Plastics Research Online, 1-4 (2017), DOI:10.2417/spepro.006917
S K Swain, N Sarkar, and G Sahoo â€œCoconut shell powder improves the mechanical performance of polypropylene biocompositesâ€ SPE, Plastics Research Online, 1-3, (2017) DOI:10.2417/spepro.006914.
S. Behera and S. Nandkeolyar, “Analysis of isolated hybrid system for power supply to a remote island,” Procedia Energy (Elsevier), vol. 117, pp. 1040-1046, 2017. (UGC/Scopus) DOI: https://doi.org/10.1016/j.egypro.2017.05.226 ISSN: 1876-6102
S. Behera and P. K. Muduli, “Remote Control of BLDC Motor,” International Journal of System and Software Engineering (IJSSE), vol. 5, no. 1, pp.1-7, 2017. ISSN: 2321-6107
S. Behera, “Estimation of PV fed emergency message display system mounted on LED street light pole,” International Journal for Science and Advance Research in Technology (IJSART), vol. 3, no.10, pp. 684-690, 2017. (UGC) DOI: https://ijsart.com/Home/IssueDetail/17695 ISSN: 2395-1052
Deepak Kumar Lal, and A. K. Barisal, "Load Frequency Control of AC Microgrid Interconnected Thermal Power System", IOP Conf. Series: Materials Science and Engineering, Volume 225, 2017.https://doi: 10.1088/1757-899X/225/1/012090
Bimalesh Chandra Rout, Deepak Kumar Lal, and A. K. Barisal, "Control of period doubling bifurcation in an SMIB power system using adaptive controller based on LaSalle's invariant principle", Cogent Engineering (Taylor & Francis Publication), Volume 4, 2017.https://doi: 10.1080/23311916.2017.1362804
Deepak Kumar Lal, and A. K. Barisal, "Comparative performances evaluation of FACTS devices on AGC with diverse sources of energy generation and SMES", Cogent Engineering (Taylor & Francis Publication), Volume 4, 2017.https://doi: 10.1080/23311916.2017.1318466
Sasmita Behera and B.B. Pati,(2017) “Protection System of a Grid Connected PV System” ELECTRICAL INDIA, Vol. 57 (04) , April, 2017, pp. 72-76.
Rosy Pradhan, S. K. Majhi, J. Pradhan, and B. B.Pati,(2017) “Performance Evaluation of PID Controller for an Automobile Cruise Control System using Ant Lion Optimizer”, Engineering Journal (Eng. J.), vol. 21, no. 5, pp. 347-361, Sep. 2017.
A.K. Pradhan, B.B. Pati, and Monalisa Biswal,(2017) “Sample based Fault Classification” ELECTRICAL INDIA, Vol. 57 (02) , Feb, 2017, page 34-44.
Das, S. R., Kumar, A., & Dhupal, D. (2016). Experimental investigation on cutting force and surface roughness in machining of hardened AISI 52100 steel using cBN tool. International Journal of Machining and Machinability of Materials, 18(5–6).
Das, S. R., Kumar, A., & Dhupal, D. (2016). Experimental investigation on cutting force and surface roughness in machining of hardened AISI 52100 steel using cBN tool. International Journal of Machining and Machinability of Materials, 18(5–6).
Das, S. R., Kumar, A., & Dhupal, D. (2016). Experimental investigation on cutting force and surface roughness in machining of hardened AISI 52100 steel using cBN tool. International Journal of Machining and Machinability of Materials, 18(5–6).
Das, S. R., Kumar, A., & Dhupal, D. (2016). Experimental investigation on cutting force and surface roughness in machining of hardened AISI 52100 steel using cBN tool. International Journal of Machining and Machinability of Materials, 18(5–6).
Das, S. R., Kumar, A., & Dhupal, D. (2016). Experimental investigation on cutting force and surface roughness in machining of hardened AISI 52100 steel using cBN tool. International Journal of Machining and Machinability of Materials, 18(5–6).
Das, S. R., Kumar, A., & Dhupal, D. (2016). Experimental investigation on cutting force and surface roughness in machining of hardened AISI 52100 steel using cBN tool. International Journal of Machining and Machinability of Materials, 18(5–6).
Das, S. R., Kumar, A., & Dhupal, D. (2016). Experimental investigation on cutting force and surface roughness in machining of hardened AISI 52100 steel using cBN tool. International Journal of Machining and Machinability of Materials, 18(5–6).
Das, S. R., Kumar, A., & Dhupal, D. (2016). Experimental investigation on cutting force and surface roughness in machining of hardened AISI 52100 steel using cBN tool. International Journal of Machining and Machinability of Materials, 18(5–6).
Das, S. R., Kumar, A., & Dhupal, D. (2016). Experimental investigation on cutting force and surface roughness in machining of hardened AISI 52100 steel using cBN tool. International Journal of Machining and Machinability of Materials, 18(5–6).
Das, S. R., Kumar, A., & Dhupal, D. (2016). Experimental investigation on cutting force and surface roughness in machining of hardened AISI 52100 steel using cBN tool. International Journal of Machining and Machinability of Materials, 18(5–6).
Das, S. R., Kumar, A., & Dhupal, D. (2016). Experimental investigation on cutting force and surface roughness in machining of hardened AISI 52100 steel using cBN tool. International Journal of Machining and Machinability of Materials, 18(5–6).
Das, S. R., Kumar, A., & Dhupal, D. (2016). Experimental investigation on cutting force and surface roughness in machining of hardened AISI 52100 steel using cBN tool. International Journal of Machining and Machinability of Materials, 18(5–6).
Narasingh Deep, Punyapriya Mishra & Swadhin Kumar Patel, Abrasive wear behavior of graphite reinforced PMMA matrix composites, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) special issue, 329-334
Das, S. R., Kumar, A., & Dhupal, D. (2016). Experimental investigation on cutting force and surface roughness in machining of hardened AISI 52100 steel using cBN tool. International Journal of Machining and Machinability of Materials, 18(5–6).
Das, S. R., Kumar, A., & Dhupal, D. (2016). Experimental investigation on cutting force and surface roughness in machining of hardened AISI 52100 steel using cBN tool. International Journal of Machining and Machinability of Materials, 18(5–6).
92. Das, S. R., Kumar, A., & Dhupal, D. (2016). Experimental investigation on cutting force and surface roughness in machining of hardened AISI 52100 steel using cBN tool. International Journal of Machining and Machinability of Materials, 18(5–6).
Fanismita Mohanty, G Prusty, P Mohapatra and S K Swain* â€œAqueous Compatibility of Starch with Albumin Bovine: An Ultrasonic Studyâ€ J Bionanoscience (American Scientific Publishers) 10 (5), 348-355 (2016) DOI:10.1166/jbns.2016.1397.
N Sarkar, G Sahoo, R Das, G Prusty, D Sahu, and S K Swain* â€œAnti-corrosion Performance of Three Dimensional Hierarchical PANI@BN Nano hybrids. Industrial & Engineering Chemistry Research (American Chemical Society), 55(5), 2931-2940 (2016). DOI: 10.1021/acs.iecr.5b04887 (Impact Factor: 3.375)
G C Pradhan and S K Swain* â€œGraphite reinforced oxygen barrier conducting starch nanocompositesâ€ Polymer composites (Willey), 37(7) 2083-2091 (2016). DOI; 10.1002/pc.23386 (Impact Factor: 2.262)
Fanismita Mohanty, G Prusty, P Mohapatra and S K Swain* â€œAqueous Compatibility of Starch with Albumin Bovine: An Ultrasonic Studyâ€ J Bionanoscience (American Scientific Publishers) 10 (5), 348-355 (2016) DOI:10.1166/jbns.2016.1397.
N Sarkar, G Sahoo, R Das, G Prusty, D Sahu, and S K Swain* â€œAnti-corrosion Performance of Three Dimensional Hierarchical PANI@BN Nano hybrids. Industrial & Engineering Chemistry Research (American Chemical Society), 55(5), 2931-2940 (2016). DOI: 10.1021/acs.iecr.5b04887 (Impact Factor: 3.375)
G C Pradhan and S K Swain* â€œGraphite reinforced oxygen barrier conducting starch nanocompositesâ€ Polymer composites (Willey), 37(7) 2083-2091 (2016). DOI; 10.1002/pc.23386 (Impact Factor: 2.262)
Fanismita Mohanty, G Prusty, P Mohapatra and S K Swain* â€œAqueous Compatibility of Starch with Albumin Bovine: An Ultrasonic Studyâ€ J Bionanoscience (American Scientific Publishers) 10 (5), 348-355 (2016) DOI:10.1166/jbns.2016.1397.
N Sarkar, G Sahoo, R Das, G Prusty, D Sahu, and S K Swain* â€œAnti-corrosion Performance of Three Dimensional Hierarchical PANI@BN Nano hybrids. Industrial & Engineering Chemistry Research (American Chemical Society), 55(5), 2931-2940 (2016). DOI: 10.1021/acs.iecr.5b04887 (Impact Factor: 3.375)
G C Pradhan and S K Swain* â€œGraphite reinforced oxygen barrier conducting starch nanocompositesâ€ Polymer composites (Willey), 37(7) 2083-2091 (2016). DOI; 10.1002/pc.23386 (Impact Factor: 2.262)
S K Basiruddin and S K Swain* â€œPhenylboronic acid functionalized reduced graphene oxide based fluorescence nano sensor for glucose sensingâ€ Materials Science & Engineering: C (Elsevier), 58, 103-109 (2016). DOI: 10.1016/j.msec.2015.07.068 (Impact Factor: 4.959)
K Prusty and S K Swain* â€œNano CaCO3 imprinted starch hybrid Polyethylhexylacrylate polyvinylalcohol nanocomposite thin filmsâ€ Carbohydrate Polymers (Elsevier), 139, 90-98 (2016). DOI:10.1016/J.CARBPOL.2015.12.009 (Impact Factor: 6.044)
Fanismita Mohanty, G Prusty, P Mohapatra and S K Swain* â€œAqueous Compatibility of Starch with Albumin Bovine: An Ultrasonic Studyâ€ J Bionanoscience (American Scientific Publishers) 10 (5), 348-355 (2016) DOI:10.1166/jbns.2016.1397.
N Sarkar, G Sahoo, R Das, G Prusty, D Sahu, and S K Swain* â€œAnti-corrosion Performance of Three Dimensional Hierarchical PANI@BN Nano hybrids. Industrial & Engineering Chemistry Research (American Chemical Society), 55(5), 2931-2940 (2016). DOI: 10.1021/acs.iecr.5b04887 (Impact Factor: 3.375)
G C Pradhan and S K Swain* â€œGraphite reinforced oxygen barrier conducting starch nanocompositesâ€ Polymer composites (Willey), 37(7) 2083-2091 (2016). DOI; 10.1002/pc.23386 (Impact Factor: 2.262)
S K Basiruddin and S K Swain* â€œPhenylboronic acid functionalized reduced graphene oxide based fluorescence nano sensor for glucose sensingâ€ Materials Science & Engineering: C (Elsevier), 58, 103-109 (2016). DOI: 10.1016/j.msec.2015.07.068 (Impact Factor: 4.959)
K Prusty and S K Swain* â€œNano CaCO3 imprinted starch hybrid Polyethylhexylacrylate polyvinylalcohol nanocomposite thin filmsâ€ Carbohydrate Polymers (Elsevier), 139, 90-98 (2016). DOI:10.1016/J.CARBPOL.2015.12.009 (Impact Factor: 6.044)
Fanismita Mohanty, G Prusty, P Mohapatra and S K Swain* â€œAqueous Compatibility of Starch with Albumin Bovine: An Ultrasonic Studyâ€ J Bionanoscience (American Scientific Publishers) 10 (5), 348-355 (2016) DOI:10.1166/jbns.2016.1397.
N Sarkar, G Sahoo, R Das, G Prusty, D Sahu, and S K Swain* â€œAnti-corrosion Performance of Three Dimensional Hierarchical PANI@BN Nano hybrids. Industrial & Engineering Chemistry Research (American Chemical Society), 55(5), 2931-2940 (2016). DOI: 10.1021/acs.iecr.5b04887 (Impact Factor: 3.375)
G C Pradhan and S K Swain* â€œGraphite reinforced oxygen barrier conducting starch nanocompositesâ€ Polymer composites (Willey), 37(7) 2083-2091 (2016). DOI; 10.1002/pc.23386 (Impact Factor: 2.262)
S K Basiruddin and S K Swain* â€œPhenylboronic acid functionalized reduced graphene oxide based fluorescence nano sensor for glucose sensingâ€ Materials Science & Engineering: C (Elsevier), 58, 103-109 (2016). DOI: 10.1016/j.msec.2015.07.068 (Impact Factor: 4.959)
K Prusty and S K Swain* â€œNano CaCO3 imprinted starch hybrid Polyethylhexylacrylate polyvinylalcohol nanocomposite thin filmsâ€ Carbohydrate Polymers (Elsevier), 139, 90-98 (2016). DOI:10.1016/J.CARBPOL.2015.12.009 (Impact Factor: 6.044)
Fanismita Mohanty, G Prusty, P Mohapatra and S K Swain* â€œAqueous Compatibility of Starch with Albumin Bovine: An Ultrasonic Studyâ€ J Bionanoscience (American Scientific Publishers) 10 (5), 348-355 (2016) DOI:10.1166/jbns.2016.1397.
N Sarkar, G Sahoo, R Das, G Prusty, D Sahu, and S K Swain* â€œAnti-corrosion Performance of Three Dimensional Hierarchical PANI@BN Nano hybrids. Industrial & Engineering Chemistry Research (American Chemical Society), 55(5), 2931-2940 (2016). DOI: 10.1021/acs.iecr.5b04887 (Impact Factor: 3.375)
G C Pradhan and S K Swain* â€œGraphite reinforced oxygen barrier conducting starch nanocompositesâ€ Polymer composites (Willey), 37(7) 2083-2091 (2016). DOI; 10.1002/pc.23386 (Impact Factor: 2.262)
S K Basiruddin and S K Swain* â€œPhenylboronic acid functionalized reduced graphene oxide based fluorescence nano sensor for glucose sensingâ€ Materials Science & Engineering: C (Elsevier), 58, 103-109 (2016). DOI: 10.1016/j.msec.2015.07.068 (Impact Factor: 4.959)
K Prusty and S K Swain* â€œNano CaCO3 imprinted starch hybrid Polyethylhexylacrylate polyvinylalcohol nanocomposite thin filmsâ€ Carbohydrate Polymers (Elsevier), 139, 90-98 (2016). DOI:10.1016/J.CARBPOL.2015.12.009 (Impact Factor: 6.044)
Fanismita Mohanty, G Prusty, P Mohapatra and S K Swain* â€œAqueous Compatibility of Starch with Albumin Bovine: An Ultrasonic Studyâ€ J Bionanoscience (American Scientific Publishers) 10 (5), 348-355 (2016) DOI:10.1166/jbns.2016.1397.
N Sarkar, G Sahoo, R Das, G Prusty, D Sahu, and S K Swain* â€œAnti-corrosion Performance of Three Dimensional Hierarchical PANI@BN Nano hybrids. Industrial & Engineering Chemistry Research (American Chemical Society), 55(5), 2931-2940 (2016). DOI: 10.1021/acs.iecr.5b04887 (Impact Factor: 3.375)
G C Pradhan and S K Swain* â€œGraphite reinforced oxygen barrier conducting starch nanocompositesâ€ Polymer composites (Willey), 37(7) 2083-2091 (2016). DOI; 10.1002/pc.23386 (Impact Factor: 2.262)
Padhi, P. K. â€œThe rising importance of Cross cultural communication in global business scenarioâ€ in Journal of Research in Humanities and Social Science (Quest Journals), Volume-4, Issue-1, 2016, ISSN: 2321-9467, Page no-20-26.
Padhi, P. K. â€œThe rising importance of Cross cultural communication in global business scenarioâ€ in Journal of Research in Humanities and Social Science (Quest Journals), Volume-4, Issue-1, 2016, ISSN: 2321-9467, Page no-20-26.
Padhi, P. K. â€œThe rising importance of Cross cultural communication in global business scenarioâ€ in Journal of Research in Humanities and Social Science (Quest Journals), Volume-4, Issue-1, 2016, ISSN: 2321-9467, Page no-20-26.
Padhi, P. K. â€œThe rising importance of Cross cultural communication in global business scenarioâ€ in Journal of Research in Humanities and Social Science (Quest Journals), Volume-4, Issue-1, 2016, ISSN: 2321-9467, Page no-20-26.
S K Basiruddin and S K Swain* â€œPhenylboronic acid functionalized reduced graphene oxide based fluorescence nano sensor for glucose sensingâ€ Materials Science & Engineering: C (Elsevier), 58, 103-109 (2016). DOI: 10.1016/j.msec.2015.07.068 (Impact Factor: 4.959)
K Prusty and S K Swain* â€œNano CaCO3 imprinted starch hybrid Polyethylhexylacrylate polyvinylalcohol nanocomposite thin filmsâ€ Carbohydrate Polymers (Elsevier), 139, 90-98 (2016). DOI:10.1016/J.CARBPOL.2015.12.009 (Impact Factor: 6.044)
Fanismita Mohanty, G Prusty, P Mohapatra and S K Swain* â€œAqueous Compatibility of Starch with Albumin Bovine: An Ultrasonic Studyâ€ J Bionanoscience (American Scientific Publishers) 10 (5), 348-355 (2016) DOI:10.1166/jbns.2016.1397.
N Sarkar, G Sahoo, R Das, G Prusty, D Sahu, and S K Swain* â€œAnti-corrosion Performance of Three Dimensional Hierarchical PANI@BN Nano hybrids. Industrial & Engineering Chemistry Research (American Chemical Society), 55(5), 2931-2940 (2016). DOI: 10.1021/acs.iecr.5b04887 (Impact Factor: 3.375)
G C Pradhan and S K Swain* â€œGraphite reinforced oxygen barrier conducting starch nanocompositesâ€ Polymer composites (Willey), 37(7) 2083-2091 (2016). DOI; 10.1002/pc.23386 (Impact Factor: 2.262)
S K Basiruddin and S K Swain* â€œPhenylboronic acid functionalized reduced graphene oxide based fluorescence nano sensor for glucose sensingâ€ Materials Science & Engineering: C (Elsevier), 58, 103-109 (2016). DOI: 10.1016/j.msec.2015.07.068 (Impact Factor: 4.959)
K Prusty and S K Swain* â€œNano CaCO3 imprinted starch hybrid Polyethylhexylacrylate polyvinylalcohol nanocomposite thin filmsâ€ Carbohydrate Polymers (Elsevier), 139, 90-98 (2016). DOI:10.1016/J.CARBPOL.2015.12.009 (Impact Factor: 6.044)
Fanismita Mohanty, G Prusty, P Mohapatra and S K Swain* â€œAqueous Compatibility of Starch with Albumin Bovine: An Ultrasonic Studyâ€ J Bionanoscience (American Scientific Publishers) 10 (5), 348-355 (2016) DOI:10.1166/jbns.2016.1397.
N Sarkar, G Sahoo, R Das, G Prusty, D Sahu, and S K Swain* â€œAnti-corrosion Performance of Three Dimensional Hierarchical PANI@BN Nano hybrids. Industrial & Engineering Chemistry Research (American Chemical Society), 55(5), 2931-2940 (2016). DOI: 10.1021/acs.iecr.5b04887 (Impact Factor: 3.375)
G C Pradhan and S K Swain* â€œGraphite reinforced oxygen barrier conducting starch nanocompositesâ€ Polymer composites (Willey), 37(7) 2083-2091 (2016). DOI; 10.1002/pc.23386 (Impact Factor: 2.262)
F. Mohanty and S K Swain* â€œEffect of graphene platelets on the thermal and conducting properties of Poly (ethyl methacrylate)â€ Advances in Polymer Technology (Wiley Periodicals, Inc.), 37, 1316-1322 (2018) DOI 10.1002/ADV21790. (Impact Factor: 2.663)
S K Basiruddin and S K Swain* â€œPhenylboronic acid functionalized reduced graphene oxide based fluorescence nano sensor for glucose sensingâ€ Materials Science & Engineering: C (Elsevier), 58, 103-109 (2016). DOI: 10.1016/j.msec.2015.07.068 (Impact Factor: 4.959)
K Prusty and S K Swain* â€œNano CaCO3 imprinted starch hybrid Polyethylhexylacrylate polyvinylalcohol nanocomposite thin filmsâ€ Carbohydrate Polymers (Elsevier), 139, 90-98 (2016). DOI:10.1016/J.CARBPOL.2015.12.009 (Impact Factor: 6.044)
Fanismita Mohanty, G Prusty, P Mohapatra and S K Swain* â€œAqueous Compatibility of Starch with Albumin Bovine: An Ultrasonic Studyâ€ J Bionanoscience (American Scientific Publishers) 10 (5), 348-355 (2016) DOI:10.1166/jbns.2016.1397.
N Sarkar, G Sahoo, R Das, G Prusty, D Sahu, and S K Swain* â€œAnti-corrosion Performance of Three Dimensional Hierarchical PANI@BN Nano hybrids. Industrial & Engineering Chemistry Research (American Chemical Society), 55(5), 2931-2940 (2016). DOI: 10.1021/acs.iecr.5b04887 (Impact Factor: 3.375)
G C Pradhan and S K Swain* â€œGraphite reinforced oxygen barrier conducting starch nanocompositesâ€ Polymer composites (Willey), 37(7) 2083-2091 (2016). DOI; 10.1002/pc.23386 (Impact Factor: 2.262)
F. Mohanty and S K Swain* â€œEffect of graphene platelets on the thermal and conducting properties of Poly (ethyl methacrylate)â€ Advances in Polymer Technology (Wiley Periodicals, Inc.), 37, 1316-1322 (2018) DOI 10.1002/ADV21790. (Impact Factor: 2.663)
S K Basiruddin and S K Swain* â€œPhenylboronic acid functionalized reduced graphene oxide based fluorescence nano sensor for glucose sensingâ€ Materials Science & Engineering: C (Elsevier), 58, 103-109 (2016). DOI: 10.1016/j.msec.2015.07.068 (Impact Factor: 4.959)
K Prusty and S K Swain* â€œNano CaCO3 imprinted starch hybrid Polyethylhexylacrylate polyvinylalcohol nanocomposite thin filmsâ€ Carbohydrate Polymers (Elsevier), 139, 90-98 (2016). DOI:10.1016/J.CARBPOL.2015.12.009 (Impact Factor: 6.044)
Fanismita Mohanty, G Prusty, P Mohapatra and S K Swain* â€œAqueous Compatibility of Starch with Albumin Bovine: An Ultrasonic Studyâ€ J Bionanoscience (American Scientific Publishers) 10 (5), 348-355 (2016) DOI:10.1166/jbns.2016.1397.
N Sarkar, G Sahoo, R Das, G Prusty, D Sahu, and S K Swain* â€œAnti-corrosion Performance of Three Dimensional Hierarchical PANI@BN Nano hybrids. Industrial & Engineering Chemistry Research (American Chemical Society), 55(5), 2931-2940 (2016). DOI: 10.1021/acs.iecr.5b04887 (Impact Factor: 3.375)
G C Pradhan and S K Swain* â€œGraphite reinforced oxygen barrier conducting starch nanocompositesâ€ Polymer composites (Willey), 37(7) 2083-2091 (2016). DOI; 10.1002/pc.23386 (Impact Factor: 2.262)
F. Mohanty and S K Swain* â€œEffect of graphene platelets on the thermal and conducting properties of Poly (ethyl methacrylate)â€ Advances in Polymer Technology (Wiley Periodicals, Inc.), 37, 1316-1322 (2018) DOI 10.1002/ADV21790. (Impact Factor: 2.663)
S K Basiruddin and S K Swain* â€œPhenylboronic acid functionalized reduced graphene oxide based fluorescence nano sensor for glucose sensingâ€ Materials Science & Engineering: C (Elsevier), 58, 103-109 (2016). DOI: 10.1016/j.msec.2015.07.068 (Impact Factor: 4.959)
K Prusty and S K Swain* â€œNano CaCO3 imprinted starch hybrid Polyethylhexylacrylate polyvinylalcohol nanocomposite thin filmsâ€ Carbohydrate Polymers (Elsevier), 139, 90-98 (2016). DOI:10.1016/J.CARBPOL.2015.12.009 (Impact Factor: 6.044)
Fanismita Mohanty, G Prusty, P Mohapatra and S K Swain* â€œAqueous Compatibility of Starch with Albumin Bovine: An Ultrasonic Studyâ€ J Bionanoscience (American Scientific Publishers) 10 (5), 348-355 (2016) DOI:10.1166/jbns.2016.1397.
N Sarkar, G Sahoo, R Das, G Prusty, D Sahu, and S K Swain* â€œAnti-corrosion Performance of Three Dimensional Hierarchical PANI@BN Nano hybrids. Industrial & Engineering Chemistry Research (American Chemical Society), 55(5), 2931-2940 (2016). DOI: 10.1021/acs.iecr.5b04887 (Impact Factor: 3.375)
G C Pradhan and S K Swain* â€œGraphite reinforced oxygen barrier conducting starch nanocompositesâ€ Polymer composites (Willey), 37(7) 2083-2091 (2016). DOI; 10.1002/pc.23386 (Impact Factor: 2.262)
F. Mohanty and S K Swain* â€œEffect of graphene platelets on the thermal and conducting properties of Poly (ethyl methacrylate)â€ Advances in Polymer Technology (Wiley Periodicals, Inc.), 37, 1316-1322 (2018) DOI 10.1002/ADV21790. (Impact Factor: 2.663)
S K Basiruddin and S K Swain* â€œPhenylboronic acid functionalized reduced graphene oxide based fluorescence nano sensor for glucose sensingâ€ Materials Science & Engineering: C (Elsevier), 58, 103-109 (2016). DOI: 10.1016/j.msec.2015.07.068 (Impact Factor: 4.959)
K Prusty and S K Swain* â€œNano CaCO3 imprinted starch hybrid Polyethylhexylacrylate polyvinylalcohol nanocomposite thin filmsâ€ Carbohydrate Polymers (Elsevier), 139, 90-98 (2016). DOI:10.1016/J.CARBPOL.2015.12.009 (Impact Factor: 6.044)
Fanismita Mohanty, G Prusty, P Mohapatra and S K Swain* â€œAqueous Compatibility of Starch with Albumin Bovine: An Ultrasonic Studyâ€ J Bionanoscience (American Scientific Publishers) 10 (5), 348-355 (2016) DOI:10.1166/jbns.2016.1397.
N Sarkar, G Sahoo, R Das, G Prusty, D Sahu, and S K Swain* â€œAnti-corrosion Performance of Three Dimensional Hierarchical PANI@BN Nano hybrids. Industrial & Engineering Chemistry Research (American Chemical Society), 55(5), 2931-2940 (2016). DOI: 10.1021/acs.iecr.5b04887 (Impact Factor: 3.375)
G C Pradhan and S K Swain* â€œGraphite reinforced oxygen barrier conducting starch nanocompositesâ€ Polymer composites (Willey), 37(7) 2083-2091 (2016). DOI; 10.1002/pc.23386 (Impact Factor: 2.262)
F. Mohanty and S K Swain* â€œEffect of graphene platelets on the thermal and conducting properties of Poly (ethyl methacrylate)â€ Advances in Polymer Technology (Wiley Periodicals, Inc.), 37, 1316-1322 (2018) DOI 10.1002/ADV21790. (Impact Factor: 2.663)
S K Basiruddin and S K Swain* â€œPhenylboronic acid functionalized reduced graphene oxide based fluorescence nano sensor for glucose sensingâ€ Materials Science & Engineering: C (Elsevier), 58, 103-109 (2016). DOI: 10.1016/j.msec.2015.07.068 (Impact Factor: 4.959)
K Prusty and S K Swain* â€œNano CaCO3 imprinted starch hybrid Polyethylhexylacrylate polyvinylalcohol nanocomposite thin filmsâ€ Carbohydrate Polymers (Elsevier), 139, 90-98 (2016). DOI:10.1016/J.CARBPOL.2015.12.009 (Impact Factor: 6.044)
Fanismita Mohanty, G Prusty, P Mohapatra and S K Swain* â€œAqueous Compatibility of Starch with Albumin Bovine: An Ultrasonic Studyâ€ J Bionanoscience (American Scientific Publishers) 10 (5), 348-355 (2016) DOI:10.1166/jbns.2016.1397.
N Sarkar, G Sahoo, R Das, G Prusty, D Sahu, and S K Swain* â€œAnti-corrosion Performance of Three Dimensional Hierarchical PANI@BN Nano hybrids. Industrial & Engineering Chemistry Research (American Chemical Society), 55(5), 2931-2940 (2016). DOI: 10.1021/acs.iecr.5b04887 (Impact Factor: 3.375)
G C Pradhan and S K Swain* â€œGraphite reinforced oxygen barrier conducting starch nanocompositesâ€ Polymer composites (Willey), 37(7) 2083-2091 (2016). DOI; 10.1002/pc.23386 (Impact Factor: 2.262)
F. Mohanty and S K Swain* â€œEffect of graphene platelets on the thermal and conducting properties of Poly (ethyl methacrylate)â€ Advances in Polymer Technology (Wiley Periodicals, Inc.), 37, 1316-1322 (2018) DOI 10.1002/ADV21790. (Impact Factor: 2.663)
S K Basiruddin and S K Swain* â€œPhenylboronic acid functionalized reduced graphene oxide based fluorescence nano sensor for glucose sensingâ€ Materials Science & Engineering: C (Elsevier), 58, 103-109 (2016). DOI: 10.1016/j.msec.2015.07.068 (Impact Factor: 4.959)
K Prusty and S K Swain* â€œNano CaCO3 imprinted starch hybrid Polyethylhexylacrylate polyvinylalcohol nanocomposite thin filmsâ€ Carbohydrate Polymers (Elsevier), 139, 90-98 (2016). DOI:10.1016/J.CARBPOL.2015.12.009 (Impact Factor: 6.044)
Fanismita Mohanty, G Prusty, P Mohapatra and S K Swain* â€œAqueous Compatibility of Starch with Albumin Bovine: An Ultrasonic Studyâ€ J Bionanoscience (American Scientific Publishers) 10 (5), 348-355 (2016) DOI:10.1166/jbns.2016.1397.
N Sarkar, G Sahoo, R Das, G Prusty, D Sahu, and S K Swain* â€œAnti-corrosion Performance of Three Dimensional Hierarchical PANI@BN Nano hybrids. Industrial & Engineering Chemistry Research (American Chemical Society), 55(5), 2931-2940 (2016). DOI: 10.1021/acs.iecr.5b04887 (Impact Factor: 3.375)
G C Pradhan and S K Swain* â€œGraphite reinforced oxygen barrier conducting starch nanocompositesâ€ Polymer composites (Willey), 37(7) 2083-2091 (2016). DOI; 10.1002/pc.23386 (Impact Factor: 2.262)
F. Mohanty and S K Swain* â€œEffect of graphene platelets on the thermal and conducting properties of Poly (ethyl methacrylate)â€ Advances in Polymer Technology (Wiley Periodicals, Inc.), 37, 1316-1322 (2018) DOI 10.1002/ADV21790. (Impact Factor: 2.663)
S K Basiruddin and S K Swain* â€œPhenylboronic acid functionalized reduced graphene oxide based fluorescence nano sensor for glucose sensingâ€ Materials Science & Engineering: C (Elsevier), 58, 103-109 (2016). DOI: 10.1016/j.msec.2015.07.068 (Impact Factor: 4.959)
K Prusty and S K Swain* â€œNano CaCO3 imprinted starch hybrid Polyethylhexylacrylate polyvinylalcohol nanocomposite thin filmsâ€ Carbohydrate Polymers (Elsevier), 139, 90-98 (2016). DOI:10.1016/J.CARBPOL.2015.12.009 (Impact Factor: 6.044)
Fanismita Mohanty, G Prusty, P Mohapatra and S K Swain* â€œAqueous Compatibility of Starch with Albumin Bovine: An Ultrasonic Studyâ€ J Bionanoscience (American Scientific Publishers) 10 (5), 348-355 (2016) DOI:10.1166/jbns.2016.1397.
N Sarkar, G Sahoo, R Das, G Prusty, D Sahu, and S K Swain* â€œAnti-corrosion Performance of Three Dimensional Hierarchical PANI@BN Nano hybrids. Industrial & Engineering Chemistry Research (American Chemical Society), 55(5), 2931-2940 (2016). DOI: 10.1021/acs.iecr.5b04887 (Impact Factor: 3.375)
G C Pradhan and S K Swain* â€œGraphite reinforced oxygen barrier conducting starch nanocompositesâ€ Polymer composites (Willey), 37(7) 2083-2091 (2016). DOI; 10.1002/pc.23386 (Impact Factor: 2.262)
F. Mohanty and S K Swain* â€œEffect of graphene platelets on the thermal and conducting properties of Poly (ethyl methacrylate)â€ Advances in Polymer Technology (Wiley Periodicals, Inc.), 37, 1316-1322 (2018) DOI 10.1002/ADV21790. (Impact Factor: 2.663)
S K Basiruddin and S K Swain* â€œPhenylboronic acid functionalized reduced graphene oxide based fluorescence nano sensor for glucose sensingâ€ Materials Science & Engineering: C (Elsevier), 58, 103-109 (2016). DOI: 10.1016/j.msec.2015.07.068 (Impact Factor: 4.959)
K Prusty and S K Swain* â€œNano CaCO3 imprinted starch hybrid Polyethylhexylacrylate polyvinylalcohol nanocomposite thin filmsâ€ Carbohydrate Polymers (Elsevier), 139, 90-98 (2016). DOI:10.1016/J.CARBPOL.2015.12.009 (Impact Factor: 6.044)
Fanismita Mohanty, G Prusty, P Mohapatra and S K Swain* â€œAqueous Compatibility of Starch with Albumin Bovine: An Ultrasonic Studyâ€ J Bionanoscience (American Scientific Publishers) 10 (5), 348-355 (2016) DOI:10.1166/jbns.2016.1397.
N Sarkar, G Sahoo, R Das, G Prusty, D Sahu, and S K Swain* â€œAnti-corrosion Performance of Three Dimensional Hierarchical PANI@BN Nano hybrids. Industrial & Engineering Chemistry Research (American Chemical Society), 55(5), 2931-2940 (2016). DOI: 10.1021/acs.iecr.5b04887 (Impact Factor: 3.375)
G C Pradhan and S K Swain* â€œGraphite reinforced oxygen barrier conducting starch nanocompositesâ€ Polymer composites (Willey), 37(7) 2083-2091 (2016). DOI; 10.1002/pc.23386 (Impact Factor: 2.262)
F. Mohanty and S K Swain* â€œEffect of graphene platelets on the thermal and conducting properties of Poly (ethyl methacrylate)â€ Advances in Polymer Technology (Wiley Periodicals, Inc.), 37, 1316-1322 (2018) DOI 10.1002/ADV21790. (Impact Factor: 2.663)
S K Basiruddin and S K Swain* â€œPhenylboronic acid functionalized reduced graphene oxide based fluorescence nano sensor for glucose sensingâ€ Materials Science & Engineering: C (Elsevier), 58, 103-109 (2016). DOI: 10.1016/j.msec.2015.07.068 (Impact Factor: 4.959)
K Prusty and S K Swain* â€œNano CaCO3 imprinted starch hybrid Polyethylhexylacrylate polyvinylalcohol nanocomposite thin filmsâ€ Carbohydrate Polymers (Elsevier), 139, 90-98 (2016). DOI:10.1016/J.CARBPOL.2015.12.009 (Impact Factor: 6.044)
Fanismita Mohanty, G Prusty, P Mohapatra and S K Swain* â€œAqueous Compatibility of Starch with Albumin Bovine: An Ultrasonic Studyâ€ J Bionanoscience (American Scientific Publishers) 10 (5), 348-355 (2016) DOI:10.1166/jbns.2016.1397.
N Sarkar, G Sahoo, R Das, G Prusty, D Sahu, and S K Swain* â€œAnti-corrosion Performance of Three Dimensional Hierarchical PANI@BN Nano hybrids. Industrial & Engineering Chemistry Research (American Chemical Society), 55(5), 2931-2940 (2016). DOI: 10.1021/acs.iecr.5b04887 (Impact Factor: 3.375)
G C Pradhan and S K Swain* â€œGraphite reinforced oxygen barrier conducting starch nanocompositesâ€ Polymer composites (Willey), 37(7) 2083-2091 (2016). DOI; 10.1002/pc.23386 (Impact Factor: 2.262)
F. Mohanty and S K Swain* â€œEffect of graphene platelets on the thermal and conducting properties of Poly (ethyl methacrylate)â€ Advances in Polymer Technology (Wiley Periodicals, Inc.), 37, 1316-1322 (2018) DOI 10.1002/ADV21790. (Impact Factor: 2.663)
S K Basiruddin and S K Swain* â€œPhenylboronic acid functionalized reduced graphene oxide based fluorescence nano sensor for glucose sensingâ€ Materials Science & Engineering: C (Elsevier), 58, 103-109 (2016). DOI: 10.1016/j.msec.2015.07.068 (Impact Factor: 4.959)
K Prusty and S K Swain* â€œNano CaCO3 imprinted starch hybrid Polyethylhexylacrylate polyvinylalcohol nanocomposite thin filmsâ€ Carbohydrate Polymers (Elsevier), 139, 90-98 (2016). DOI:10.1016/J.CARBPOL.2015.12.009 (Impact Factor: 6.044)
Fanismita Mohanty, G Prusty, P Mohapatra and S K Swain* â€œAqueous Compatibility of Starch with Albumin Bovine: An Ultrasonic Studyâ€ J Bionanoscience (American Scientific Publishers) 10 (5), 348-355 (2016) DOI:10.1166/jbns.2016.1397.
N Sarkar, G Sahoo, R Das, G Prusty, D Sahu, and S K Swain* â€œAnti-corrosion Performance of Three Dimensional Hierarchical PANI@BN Nano hybrids. Industrial & Engineering Chemistry Research (American Chemical Society), 55(5), 2931-2940 (2016). DOI: 10.1021/acs.iecr.5b04887 (Impact Factor: 3.375)
G C Pradhan and S K Swain* â€œGraphite reinforced oxygen barrier conducting starch nanocompositesâ€ Polymer composites (Willey), 37(7) 2083-2091 (2016). DOI; 10.1002/pc.23386 (Impact Factor: 2.262)
F. Mohanty and S K Swain* â€œEffect of graphene platelets on the thermal and conducting properties of Poly (ethyl methacrylate)â€ Advances in Polymer Technology (Wiley Periodicals, Inc.), 37, 1316-1322 (2018) DOI 10.1002/ADV21790. (Impact Factor: 2.663)
S K Basiruddin and S K Swain* â€œPhenylboronic acid functionalized reduced graphene oxide based fluorescence nano sensor for glucose sensingâ€ Materials Science & Engineering: C (Elsevier), 58, 103-109 (2016). DOI: 10.1016/j.msec.2015.07.068 (Impact Factor: 4.959)
K Prusty and S K Swain* â€œNano CaCO3 imprinted starch hybrid Polyethylhexylacrylate polyvinylalcohol nanocomposite thin filmsâ€ Carbohydrate Polymers (Elsevier), 139, 90-98 (2016). DOI:10.1016/J.CARBPOL.2015.12.009 (Impact Factor: 6.044)
Fanismita Mohanty, G Prusty, P Mohapatra and S K Swain* â€œAqueous Compatibility of Starch with Albumin Bovine: An Ultrasonic Studyâ€ J Bionanoscience (American Scientific Publishers) 10 (5), 348-355 (2016) DOI:10.1166/jbns.2016.1397.
N Sarkar, G Sahoo, R Das, G Prusty, D Sahu, and S K Swain* â€œAnti-corrosion Performance of Three Dimensional Hierarchical PANI@BN Nano hybrids. Industrial & Engineering Chemistry Research (American Chemical Society), 55(5), 2931-2940 (2016). DOI: 10.1021/acs.iecr.5b04887 (Impact Factor: 3.375)
G C Pradhan and S K Swain* â€œGraphite reinforced oxygen barrier conducting starch nanocompositesâ€ Polymer composites (Willey), 37(7) 2083-2091 (2016). DOI; 10.1002/pc.23386 (Impact Factor: 2.262)
F. Mohanty and S K Swain* â€œEffect of graphene platelets on the thermal and conducting properties of Poly (ethyl methacrylate)â€ Advances in Polymer Technology (Wiley Periodicals, Inc.), 37, 1316-1322 (2018) DOI 10.1002/ADV21790. (Impact Factor: 2.663)
S K Basiruddin and S K Swain* â€œPhenylboronic acid functionalized reduced graphene oxide based fluorescence nano sensor for glucose sensingâ€ Materials Science & Engineering: C (Elsevier), 58, 103-109 (2016). DOI: 10.1016/j.msec.2015.07.068 (Impact Factor: 4.959)
K Prusty and S K Swain* â€œNano CaCO3 imprinted starch hybrid Polyethylhexylacrylate polyvinylalcohol nanocomposite thin filmsâ€ Carbohydrate Polymers (Elsevier), 139, 90-98 (2016). DOI:10.1016/J.CARBPOL.2015.12.009 (Impact Factor: 6.044)
Fanismita Mohanty, G Prusty, P Mohapatra and S K Swain* â€œAqueous Compatibility of Starch with Albumin Bovine: An Ultrasonic Studyâ€ J Bionanoscience (American Scientific Publishers) 10 (5), 348-355 (2016) DOI:10.1166/jbns.2016.1397.
N Sarkar, G Sahoo, R Das, G Prusty, D Sahu, and S K Swain* â€œAnti-corrosion Performance of Three Dimensional Hierarchical PANI@BN Nano hybrids. Industrial & Engineering Chemistry Research (American Chemical Society), 55(5), 2931-2940 (2016). DOI: 10.1021/acs.iecr.5b04887 (Impact Factor: 3.375)
G C Pradhan and S K Swain* â€œGraphite reinforced oxygen barrier conducting starch nanocompositesâ€ Polymer composites (Willey), 37(7) 2083-2091 (2016). DOI; 10.1002/pc.23386 (Impact Factor: 2.262)
F. Mohanty and S K Swain* â€œEffect of graphene platelets on the thermal and conducting properties of Poly (ethyl methacrylate)â€ Advances in Polymer Technology (Wiley Periodicals, Inc.), 37, 1316-1322 (2018) DOI 10.1002/ADV21790. (Impact Factor: 2.663)
S K Basiruddin and S K Swain* â€œPhenylboronic acid functionalized reduced graphene oxide based fluorescence nano sensor for glucose sensingâ€ Materials Science & Engineering: C (Elsevier), 58, 103-109 (2016). DOI: 10.1016/j.msec.2015.07.068 (Impact Factor: 4.959)
K Prusty and S K Swain* â€œNano CaCO3 imprinted starch hybrid Polyethylhexylacrylate polyvinylalcohol nanocomposite thin filmsâ€ Carbohydrate Polymers (Elsevier), 139, 90-98 (2016). DOI:10.1016/J.CARBPOL.2015.12.009 (Impact Factor: 6.044)
Fanismita Mohanty, G Prusty, P Mohapatra and S K Swain* â€œAqueous Compatibility of Starch with Albumin Bovine: An Ultrasonic Studyâ€ J Bionanoscience (American Scientific Publishers) 10 (5), 348-355 (2016) DOI:10.1166/jbns.2016.1397.
N Sarkar, G Sahoo, R Das, G Prusty, D Sahu, and S K Swain* â€œAnti-corrosion Performance of Three Dimensional Hierarchical PANI@BN Nano hybrids. Industrial & Engineering Chemistry Research (American Chemical Society), 55(5), 2931-2940 (2016). DOI: 10.1021/acs.iecr.5b04887 (Impact Factor: 3.375)
G C Pradhan and S K Swain* â€œGraphite reinforced oxygen barrier conducting starch nanocompositesâ€ Polymer composites (Willey), 37(7) 2083-2091 (2016). DOI; 10.1002/pc.23386 (Impact Factor: 2.262)
Biswal, T*., Priyadarsini, M., & Sahoo P.K. (2016) A short review on fire retardant polymeric materials, European Journal of Biomedical and Pharmaceutical Sciences, 3 (8), 108-116
Biswal, T., Barik, B., & Sahoo, P. K*. (2016). Synthesis and characterization of magnetite-pectin-alginate hybrid bionanocomposite, Journal of Materials Science &Nanotechnology ,4 (2), 1-9 (UGC Approved Journal No: 63975)
Mahapatra, T. R., Panda S. K., and Kar, C. (2014), Nonlinear bending analysis of shear deformable laminated composite flat panel, International Conference on Advances in Engineering and Technology, Pune, India, 1st-3rd September published in International Journal of Engineering Sciences, Vol. 7 (2), pp. 71-76.
Mahapatra, T. R., Panda S. K., and Kar, C. (2014), Vibration behaviour of laminated composite flat panel under hygrothermal environment, Innovative Trends in Mechanical, Material, Manufacturing, Automotive, Automobile and Aeronautical Engineering” (ITMMMAAAE-2014) published in International Review of Applied Engineering Research, Vol. 4 (5), pp. 455-464
Panda, S. K., and Mahapatra, T. R. (2014), Nonlinear Finite Element Analysis of Laminated Composite Spherical Shell Vibration under Uniform Thermal Loading, Meccanica, Vol. 49 (1), pp. 191-213, DOI: 10.1007/s11012-013-9785-9 (IF: 2.7) SCI
Mahapatra, T. R. and Panda, S. K., (2015), Effects of hygrothermal conditions on free vibration behaviour of laminated composite structures, NCPCM 2014 December 5th-6th, National Institute of Technology Rourkeal, Published in: IOP Conference Series: Materials Science and Engineering, Vol. 75 pp. 012016 (1-10) DOI: 10.1088/1757-899X/75/1/012017, (IF: 0.39) (SCOPUS)
Kar, V. R., Mahapatra, T. R., and Panda, S. K (2015), Nonlinear flexural analysis of laminated composite flat panel under hygro-thermo-mechanical loading, Steel and Composite Structures An International Journal, Vol. 19 (4), pp. 1011-1033, DOI: http://dx.doi.org/10.12989/scs.2015.19.4.1011 (IF: 4.6) SCI
Mahapatra, T. R.and Panda, S. K., (2015), Thermoelastic vibration analysis of laminated doubly curved shallow panels using non-linear FEM, Journal of Thermal Stresses, Vol. 38 (1), pp. 39-68, DOI: 10.1080/01495739.2014.976125, (IF: 2.8). SCI
Mahapatra, T. R., Kar, V. R., and Panda, S. K., (2015), Nonlinear free vibration analysis of laminated composite doubly curved shell panel in hygrothermal environment, Journal of Sandwich Structures and Materials, Vol. 17 (5), pp. 511-545 DOI: 10.1177/1099636215577363 (IF: 3.9). SCI
Dewangan, S., Mahapatra, T. R. and Sharma, N., (2016) Flexural analysis of laminated composite flat panel, International Conference on “Recent Trends in Mechanical, Material Science, Manufacturing, Automobile, Aerospace Engineering and Applied Physics” (AMAEAP-2016), JNU, New Delhi, 30th April, Journal of Material Science and Mechanical Engineering, Vol. 3 (3) pp. 219-223. (IF:0.8)
Mahapatra, T. R., Panda, S. K. and Dash, S., (2016) Effect of hygrothermal environment on the nonlinear free vibration responses of laminated composite plates: A nonlinear finite element micromechanical approach, IOP Conf. Series: Materials Science and Engineering 149, 012151 DOI: 10.1088/1757-899X/149/1/012151, (IF: 0.39) (SCOPUS)
Mahapatra, T. R. and Panda, S. K., (2016), Hygrothermal effects on the flexural strength of laminated composite cylindrical panels, IOP Conference Series: Materials Science and Engineering, Vol. 115 pp. 012040 (1-10), DOI: doi:10.1088/1757-899X/115/1/012040 (IF: 0.32) (SCOPUS)
Sahoo, S. S., Panda, S. K. and Mahapatra, T. R. (2016), Static, free vibration and transient response of laminated composite curved shallow panel - An experimental approach, European Journal of Mechanics - A/Solids, Vol. 59, pp. 95-113, DOI: http://dx.doi.org/ 10.1016/j.euromechsol.2016.03.0140997-7538 (IF: 4.1) SCI
Mahapatra, T. R., Panda, S. K. and Kar, V. R., (2016), Geometrically nonlinear flexural analysis of hygro-thermo-elastic laminated composite doubly curved shell panel, International Journal of Mechanics and Materials in Design, Vol. 12 (2), pp. 153–171, DOI: 10.1007/s10999-015-9299-9, (IF: 3.7). SCI
Kar, V. R., Mahapatra, T. R., and Panda, S. K. (2016) Thermal buckling behaviour of shear deformable functionally graded single/doubly curved shell panel with TD and TID properties, Advances in Materials Research, An international journal, Vol. 5, No. 4, pp. 205-221, (IF: 3.8), SCI.
Mahapatra, T. R., Kar, V. R., and Panda, S. K. (2016), Nonlinear flexural analysis of laminated composite spherical shells under hygro-thermo-mechanical loading-a micromechanical approach, International Journal of Computational Method, Vol. 13 (3), pp. 1650015 DOI: 10.1142/S0219876216500158 (IF: 1.7) SCI.
Mahapatra, T. R., Kar, V. R., and Panda, S. K. (2016), Large amplitude bending behaviour of laminated composite curved panels, International Journal for Computer-Aided Engineering and Software, Engineering Computations, Vol. 33 (1), pp. 116-138, DOI: http://dx.doi.org/10.1108/EC-05-2014-0119 (IF: 1.67) SCIE
Mahapatra, T. R., and Panda, S. K. (2016), Nonlinear free vibration analysis of laminated composite spherical shell panel under elevated hygrothermal environment: A micromechanical approach, Aerospace Science and Technology, Vol. 49, pp. 276–288 DOI: http://dx.doi.org/10.1016/j.ast.2015.12.018 (IF: 5.6). SCI
Mahapatra, T. R., Kar, V. R., and Panda, S. K., (2016), Large Amplitude Free Vibration Analysis of Laminated Composite Spherical Panel under Hygrothermal Environment, International Journal of Structural Stability and Dynamics, Vol. 16 (3), pp. 1450105 (22 pages) DOI: 10.1142/S0219455414501053, (IF: 1.617). SCIE
Singh, V. K., Mahapatra, T. R. and Panda, S. K (2016), Nonlinear flexural analysis of single/doubly curved smart composite shell panels integrated with PFRC actuator, European Journal of Mechanics - A/Solids, Vol. 60, pp. 300–314, DOI: http://dx.doi.org/ 10.1016/j.euromechsol.2016.08.006 (IF: 4.1) SCI
Mahapatra, T. R., Panda, S. K. and Kar, V. R., (2016), Nonlinear hygro-thermo-elastic vibration analysis of doubly curved composite shell panel using finite element micromechanical model, Mechanics of Advanced Materials and Structures, Vol. 23 (11), pp. 1343-1359, DOI: 10.1080/15376494.2015.1085606, (IF: 2.8). SCI
Singh, V. K., Mahapatra, T. R. and Panda, S. K (2016), Nonlinear transient analysis of smart laminated composite plate integrated with PVDF sensor and AFC actuator, Composite Structures, Vol. 157, pp. 121–130, DOI: 10.1016/j.compstruct.2016.08. 020 (IF: 6.3) SCI
Gyan Ranjan Biswal, “System reliability optimisation of Cooling-cum-Condensate-Extraction system,” Maintenance and Reliability, Polish Acad. Sci., Elsevier, Vol. 18, No. 1, pp. 117 – 122, Jan. 2016. (IF: 2.742)
Padhi, P. K. â€œThe rising importance of Cross cultural communication in global business scenarioâ€ in Journal of Research in Humanities and Social Science (Quest Journals), Volume-4, Issue-1, 2016, ISSN: 2321-9467, Page no-20-26.
P. Patro, Effect of numerical parameters on pressure drop prediction in pneumatic conveying, Multiphase Science and Technology, 28 (3), (2016) 1–11.
P. Patro, A. K. Barik, and B. Patro, Computational study of a turbulent gas-solid confined jet flow, Powder Technology, 297 (2016), 229-238.
P. Patro, Computation of wall to suspension heat transfer in vertical pipes, Drying Technology, 34 (6) (2016), 703-712.
Kaur, N., Bhalla, S., Shankar, R. and Panigrahi, R , 2016, Experimental Evaluation of Miniature Impedance Chip for Structural Health Monitoring of Prototype Steel/ RC structures, Experimental Techniques, Vol 40, 981-992 SCIE
Sarkar, L., Biswal, S.K., Panigrahi, R. and Sarkar, B., 2016, ‘A Comparative Study to Assess the Removal Efficiency of Iron from Drinking Water Using Various Activated Charcoals’, Environment and Ecology, Vol 34 (3A), 1178-1183
G. Ganeshan, K.P. Shadangi and K. Mohanty, Thermo-chemical conversion of mango seed kernel and shell to value added products. Journal of Analytical and Applied Pyrolysis 121 (2016) 403â€“408.
M. Koul, K. P. Shadangi and K. Mohanty, Effect of catalytic vapour cracking on fuel properties and composition of castor seed pyrolytic oil. Journal of Analytical and Applied Pyrolysis 120 (2016) 103â€“109.
K. P. Shadangi and K. Mohanty, Stability Analysis of Mahua Seed and Waste Polystyrene Co-pyrolytic Oil. International Journal of Renewable Energy and Its Commercialization 2 (2016) 1â€“7.
Sucheta Panda “Unsupervised Color Image Segmentation using MRF Models to Preserve Weak Edges”, IJCMS (ISSN:2347-8527),Â June, 2016.
Implicit finite difference solution for the magnetohydrodynamics unsteady free convective flow and heat transfer of a third grade fluid past porous vertical plates (I nayak A.K.Nayak S Padhy)J- Int. J. mathematical modelling and numerical optimization (Inder science),Vol.7(1),pg.-4-18, ISSN No.-2040-3615(2016)
Agrawal, Sanjay; Samantaray, Leena; Panda, Rutuparna; , A Novel Hybrid CS-BFO Algorithm for Optimal Multilevel Image Thresholding Using Edge Magnitude Information, Hybrid Soft Computing for Image Segmentation, Pages 53-85, Springer International Publishing
H. S. Behera, S. C. Nayak, S. R. Sahu, and K. K. Sahu, â€œForecasting foreign exchange rates using CRO based different variants of FLANN and performance analysis,â€ International Journal of Computational Systems Engineering, vol. 2, no. 4, p. 190, 2016, doi: 10.1504/ijcsyse.2016.10002375
K. K. Sahu, S. R. Sahu, G. R. Biswal, P. K. Sahu, and H. S. Behera, â€œChemical reaction optimisation: a hybrid technique applied to functional link artificial neural networks with least mean square learning for foreign exchange rates forecasting,â€ International Journal of Swarm Intelligence, vol. 2, no. 2/3/4, p. 254, 2016, doi: 10.1504/ijsi.2016.081154.
F. Mohanty and S K Swain* â€œEffect of graphene platelets on the thermal and conducting properties of Poly (ethyl methacrylate)â€ Advances in Polymer Technology (Wiley Periodicals, Inc.), 37, 1316-1322 (2018) DOI 10.1002/ADV21790. (Impact Factor: 2.663)
S K Basiruddin and S K Swain* â€œPhenylboronic acid functionalized reduced graphene oxide based fluorescence nano sensor for glucose sensingâ€ Materials Science & Engineering: C (Elsevier), 58, 103-109 (2016). DOI: 10.1016/j.msec.2015.07.068 (Impact Factor: 4.959)
K Prusty and S K Swain* â€œNano CaCO3 imprinted starch hybrid Polyethylhexylacrylate polyvinylalcohol nanocomposite thin filmsâ€ Carbohydrate Polymers (Elsevier), 139, 90-98 (2016). DOI:10.1016/J.CARBPOL.2015.12.009 (Impact Factor: 6.044)
Fanismita Mohanty, G Prusty, P Mohapatra and S K Swain* â€œAqueous Compatibility of Starch with Albumin Bovine: An Ultrasonic Studyâ€ J Bionanoscience (American Scientific Publishers) 10 (5), 348-355 (2016) DOI:10.1166/jbns.2016.1397.
N Sarkar, G Sahoo, R Das, G Prusty, D Sahu, and S K Swain* â€œAnti-corrosion Performance of Three Dimensional Hierarchical PANI@BN Nano hybrids. Industrial & Engineering Chemistry Research (American Chemical Society), 55(5), 2931-2940 (2016). DOI: 10.1021/acs.iecr.5b04887 (Impact Factor: 3.375)
G C Pradhan and S K Swain* â€œGraphite reinforced oxygen barrier conducting starch nanocompositesâ€ Polymer composites (Willey), 37(7) 2083-2091 (2016). DOI; 10.1002/pc.23386 (Impact Factor: 2.262)
S. Behera, B. Subudhi and B.B. Pati, “Design of PI Controller in Pitch Control of Wind Turbine: A Comparison of PSO and PS Algorithm,” International Journal of Renewable Energy Research (IJRER) vol. 6, no. 1, pp. 271-281, 2016, (ESCI/Scopus). DOI: https://doi.org/10.20508/ijrer.v6i1.3137.g6783 ISSN: 1309-0127
S. Behera, C. P. Sahoo, B. Subudhi and B.B. Pati, “Reactive power control of isolated wind-diesel hybrid power system using grey wolf optimization technique,” Procedia Computer Science (Elsevier) vol. 92, pp. 345 – 354, 2016. (UGC/Scopus) DOI: https://doi.org/10.1016/j.procs.2016.07.389 ISSN: 1877-0509
Deepak Kumar Lal, A. K. Barisal and M. Tripathy, "Grey wolf optimizer algorithm based Fuzzy PID controller for AGC of multi-area power system with TCPS", Procedia Computer Science (Elsevier Publication) , Volume 92, 2016, pp. 99-105.https://doi: 10.1016/j.procs.2016.07.329
Performance Improvement of Electric Power Distribution System Using DG, M Mishra, PK Modi ,Distributed Generation & Alternative Energy Journal 31 (4), 50-68
Narasingh Deep, Punyapriya Mishra & Swadhin Kumar Patel, Abrasive wear behavior of graphite reinforced PMMA matrix composites, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) special issue, 329-334
Bikramaditya Das, Bidydhar Subudhi, and B.B. Pati,(2016) “Coperative formation control of Autonomous underwater vehicles: An Overview”, Int. Jour of Automation and Computing (Springer) Vol.13, No.3, June, 2016 pp. 199-225.
Sasmita Behera, B.Subudhi, B.B.Pati,(2016)“Design of PI Controller in Pitch Control of Wind Turbine: A Comparison of PSO and PS Algorithm”, International Journal of Renewable Energy Research, Vol. 6(1), 2016. pp.271-281
Bikramaditya Das, Bidydhar Subudhi, and B.B. Pati,(2016) “Co-operative control of a team of autonomous underwater vehicles in an obstacle-rich environment” Journal of Marine Engineering & Technology, Vol.15(3), Nov. 2016, pp.135-151.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts. Journal of Mechanical Science and Technology, 29(10), 4329–4340.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108–126.
Das, S. R., Kumar, A., & Dhupal, D. (2015). Surface roughness analysis of hardened steel using TiN coated ceramic inserts. International Journal of Machining and Machinability of Materials, 17(1), 22–38.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts. Journal of Mechanical Science and Technology, 29(10), 4329–4340.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108–126.
Das, S. R., Kumar, A., & Dhupal, D. (2015). Surface roughness analysis of hardened steel using TiN coated ceramic inserts. International Journal of Machining and Machinability of Materials, 17(1), 22–38.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts. Journal of Mechanical Science and Technology, 29(10), 4329–4340.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108–126.
Das, S. R., Kumar, A., & Dhupal, D. (2015). Surface roughness analysis of hardened steel using TiN coated ceramic inserts. International Journal of Machining and Machinability of Materials, 17(1), 22–38.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts. Journal of Mechanical Science and Technology, 29(10), 4329–4340.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108–126.
Das, S. R., Kumar, A., & Dhupal, D. (2015). Surface roughness analysis of hardened steel using TiN coated ceramic inserts. International Journal of Machining and Machinability of Materials, 17(1), 22–38.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts. Journal of Mechanical Science and Technology, 29(10), 4329–4340.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108–126.
Das, S. R., Kumar, A., & Dhupal, D. (2015). Surface roughness analysis of hardened steel using TiN coated ceramic inserts. International Journal of Machining and Machinability of Materials, 17(1), 22–38.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts. Journal of Mechanical Science and Technology, 29(10), 4329–4340.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108–126.
Das, S. R., Kumar, A., & Dhupal, D. (2015). Surface roughness analysis of hardened steel using TiN coated ceramic inserts. International Journal of Machining and Machinability of Materials, 17(1), 22–38.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts. Journal of Mechanical Science and Technology, 29(10), 4329–4340.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108–126.
Das, S. R., Kumar, A., & Dhupal, D. (2015). Surface roughness analysis of hardened steel using TiN coated ceramic inserts. International Journal of Machining and Machinability of Materials, 17(1), 22–38.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts. Journal of Mechanical Science and Technology, 29(10), 4329–4340.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108–126.
Das, S. R., Kumar, A., & Dhupal, D. (2015). Surface roughness analysis of hardened steel using TiN coated ceramic inserts. International Journal of Machining and Machinability of Materials, 17(1), 22–38.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts. Journal of Mechanical Science and Technology, 29(10), 4329–4340.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108–126.
Das, S. R., Kumar, A., & Dhupal, D. (2015). Surface roughness analysis of hardened steel using TiN coated ceramic inserts. International Journal of Machining and Machinability of Materials, 17(1), 22–38.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts. Journal of Mechanical Science and Technology, 29(10), 4329–4340.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108–126.
Das, S. R., Kumar, A., & Dhupal, D. (2015). Surface roughness analysis of hardened steel using TiN coated ceramic inserts. International Journal of Machining and Machinability of Materials, 17(1), 22–38.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts. Journal of Mechanical Science and Technology, 29(10), 4329–4340.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108–126.
Das, S. R., Kumar, A., & Dhupal, D. (2015). Surface roughness analysis of hardened steel using TiN coated ceramic inserts. International Journal of Machining and Machinability of Materials, 17(1), 22–38.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts. Journal of Mechanical Science and Technology, 29(10), 4329–4340.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108–126.
Das, S. R., Kumar, A., & Dhupal, D. (2015). Surface roughness analysis of hardened steel using TiN coated ceramic inserts. International Journal of Machining and Machinability of Materials, 17(1), 22–38.
Narasingh Deep, Punyapriya Mishra, Fabrication, Modeling and Analysis of The Erosive Wear Properties of Multi Walled Carbon Nanotube Reinforced PMMA Composite Using Taguchi Approach, Int. J. Recent Sci. Res, 6, 10, 6802-6806
Das, S. R., Dhupal, D., & Kumar, A. (2015). Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts. Journal of Mechanical Science and Technology, 29(10), 4329–4340.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108–126.
Das, S. R., Kumar, A., & Dhupal, D. (2015). Surface roughness analysis of hardened steel using TiN coated ceramic inserts. International Journal of Machining and Machinability of Materials, 17(1), 22–38.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts. Journal of Mechanical Science and Technology, 29(10), 4329–4340.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108–126.
Das, S. R., Kumar, A., & Dhupal, D. (2015). Surface roughness analysis of hardened steel using TiN coated ceramic inserts. International Journal of Machining and Machinability of Materials, 17(1), 22–38.
93. Das, S. R., Dhupal, D., & Kumar, A. (2015). Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts. Journal of Mechanical Science and Technology, 29(10), 4329–4340.
94. Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108–126.
95. Das, S. R., Kumar, A., & Dhupal, D. (2015). Surface roughness analysis of hardened steel using TiN coated ceramic inserts. International Journal of Machining and Machinability of Materials, 17(1), 22–38.
S Barik, S K Kisku, L Behera and S K Swain* â€œEnhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxideâ€ Polymer Composites (Wiley), 36(11), 2140-2144 (2015). DOI: 10.1002/pc.23130 (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain*, â€œBarrier properties of nano silicon carbide designed chitosan nanocompositesâ€ Carbohydrate polymer (Elsevier), 134, 60-65 (2015) DOI;10.1016/j. carbpol.2015.06.081 (Impact Factor: 6.044)
S Gantayat, G Prusty, D R Rout and S K Swain* â€œEffect of graphite platelets on thermal and mechanical properties of epoxy resinâ€ New Carbon Material (Elsevier), 30(5), 432-437 (2015). DOI: 10.1016/S187-5805(15)6020-1 (Impact Factor: 1.171)
S Barik, S K Kisku, L Behera and S K Swain* â€œEnhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxideâ€ Polymer Composites (Wiley), 36(11), 2140-2144 (2015). DOI: 10.1002/pc.23130 (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain*, â€œBarrier properties of nano silicon carbide designed chitosan nanocompositesâ€ Carbohydrate polymer (Elsevier), 134, 60-65 (2015) DOI;10.1016/j. carbpol.2015.06.081 (Impact Factor: 6.044)
S Gantayat, G Prusty, D R Rout and S K Swain* â€œEffect of graphite platelets on thermal and mechanical properties of epoxy resinâ€ New Carbon Material (Elsevier), 30(5), 432-437 (2015). DOI: 10.1016/S187-5805(15)6020-1 (Impact Factor: 1.171)
S Barik, S K Kisku, L Behera and S K Swain* â€œEnhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxideâ€ Polymer Composites (Wiley), 36(11), 2140-2144 (2015). DOI: 10.1002/pc.23130 (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain*, â€œBarrier properties of nano silicon carbide designed chitosan nanocompositesâ€ Carbohydrate polymer (Elsevier), 134, 60-65 (2015) DOI;10.1016/j. carbpol.2015.06.081 (Impact Factor: 6.044)
S Gantayat, G Prusty, D R Rout and S K Swain* â€œEffect of graphite platelets on thermal and mechanical properties of epoxy resinâ€ New Carbon Material (Elsevier), 30(5), 432-437 (2015). DOI: 10.1016/S187-5805(15)6020-1 (Impact Factor: 1.171)
S Barik, S K Kisku, L Behera and S K Swain* â€œEnhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxideâ€ Polymer Composites (Wiley), 36(11), 2140-2144 (2015). DOI: 10.1002/pc.23130 (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain*, â€œBarrier properties of nano silicon carbide designed chitosan nanocompositesâ€ Carbohydrate polymer (Elsevier), 134, 60-65 (2015) DOI;10.1016/j. carbpol.2015.06.081 (Impact Factor: 6.044)
S Gantayat, G Prusty, D R Rout and S K Swain* â€œEffect of graphite platelets on thermal and mechanical properties of epoxy resinâ€ New Carbon Material (Elsevier), 30(5), 432-437 (2015). DOI: 10.1016/S187-5805(15)6020-1 (Impact Factor: 1.171)
S Barik, S K Kisku, L Behera and S K Swain* â€œEnhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxideâ€ Polymer Composites (Wiley), 36(11), 2140-2144 (2015). DOI: 10.1002/pc.23130 (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain*, â€œBarrier properties of nano silicon carbide designed chitosan nanocompositesâ€ Carbohydrate polymer (Elsevier), 134, 60-65 (2015) DOI;10.1016/j. carbpol.2015.06.081 (Impact Factor: 6.044)
S Gantayat, G Prusty, D R Rout and S K Swain* â€œEffect of graphite platelets on thermal and mechanical properties of epoxy resinâ€ New Carbon Material (Elsevier), 30(5), 432-437 (2015). DOI: 10.1016/S187-5805(15)6020-1 (Impact Factor: 1.171)
S Barik, S K Kisku, L Behera and S K Swain* â€œEnhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxideâ€ Polymer Composites (Wiley), 36(11), 2140-2144 (2015). DOI: 10.1002/pc.23130 (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain*, â€œBarrier properties of nano silicon carbide designed chitosan nanocompositesâ€ Carbohydrate polymer (Elsevier), 134, 60-65 (2015) DOI;10.1016/j. carbpol.2015.06.081 (Impact Factor: 6.044)
S Gantayat, G Prusty, D R Rout and S K Swain* â€œEffect of graphite platelets on thermal and mechanical properties of epoxy resinâ€ New Carbon Material (Elsevier), 30(5), 432-437 (2015). DOI: 10.1016/S187-5805(15)6020-1 (Impact Factor: 1.171)
S Barik, S K Kisku, L Behera and S K Swain* â€œEnhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxideâ€ Polymer Composites (Wiley), 36(11), 2140-2144 (2015). DOI: 10.1002/pc.23130 (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain*, â€œBarrier properties of nano silicon carbide designed chitosan nanocompositesâ€ Carbohydrate polymer (Elsevier), 134, 60-65 (2015) DOI;10.1016/j. carbpol.2015.06.081 (Impact Factor: 6.044)
S Gantayat, G Prusty, D R Rout and S K Swain* â€œEffect of graphite platelets on thermal and mechanical properties of epoxy resinâ€ New Carbon Material (Elsevier), 30(5), 432-437 (2015). DOI: 10.1016/S187-5805(15)6020-1 (Impact Factor: 1.171)
S Barik, S K Kisku, L Behera and S K Swain* â€œEnhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxideâ€ Polymer Composites (Wiley), 36(11), 2140-2144 (2015). DOI: 10.1002/pc.23130 (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain*, â€œBarrier properties of nano silicon carbide designed chitosan nanocompositesâ€ Carbohydrate polymer (Elsevier), 134, 60-65 (2015) DOI;10.1016/j. carbpol.2015.06.081 (Impact Factor: 6.044)
S Gantayat, G Prusty, D R Rout and S K Swain* â€œEffect of graphite platelets on thermal and mechanical properties of epoxy resinâ€ New Carbon Material (Elsevier), 30(5), 432-437 (2015). DOI: 10.1016/S187-5805(15)6020-1 (Impact Factor: 1.171)
S Barik, S K Kisku, L Behera and S K Swain* â€œEnhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxideâ€ Polymer Composites (Wiley), 36(11), 2140-2144 (2015). DOI: 10.1002/pc.23130 (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain*, â€œBarrier properties of nano silicon carbide designed chitosan nanocompositesâ€ Carbohydrate polymer (Elsevier), 134, 60-65 (2015) DOI;10.1016/j. carbpol.2015.06.081 (Impact Factor: 6.044)
S Gantayat, G Prusty, D R Rout and S K Swain* â€œEffect of graphite platelets on thermal and mechanical properties of epoxy resinâ€ New Carbon Material (Elsevier), 30(5), 432-437 (2015). DOI: 10.1016/S187-5805(15)6020-1 (Impact Factor: 1.171)
S Barik, S K Kisku, L Behera and S K Swain* â€œEnhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxideâ€ Polymer Composites (Wiley), 36(11), 2140-2144 (2015). DOI: 10.1002/pc.23130 (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain*, â€œBarrier properties of nano silicon carbide designed chitosan nanocompositesâ€ Carbohydrate polymer (Elsevier), 134, 60-65 (2015) DOI;10.1016/j. carbpol.2015.06.081 (Impact Factor: 6.044)
S Gantayat, G Prusty, D R Rout and S K Swain* â€œEffect of graphite platelets on thermal and mechanical properties of epoxy resinâ€ New Carbon Material (Elsevier), 30(5), 432-437 (2015). DOI: 10.1016/S187-5805(15)6020-1 (Impact Factor: 1.171)
S Barik, S K Kisku, L Behera and S K Swain* â€œEnhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxideâ€ Polymer Composites (Wiley), 36(11), 2140-2144 (2015). DOI: 10.1002/pc.23130 (Impact Factor: 2.262)
Padhi, P. K. â€œA Study of Celieâ€™s Emancipation in Alice Walkerâ€™s The Color Purpleâ€ in International Journal of Humanities and Social Science Invention (IJHSSI), Volume-4, Issue-2, February 2015, ISSN: 2319-7714, Page no. 1-5.
Padhi, P. K. â€œThe Growing Importance of Soft Skills in the Workplaceâ€ in Sahitya Anand: An Inter-Disciplinary Referred International Research Journal, Vol â€“ I, Issue â€“ 12, ISSN: 2320-5075.
Padhi, P. K. â€œA Study of Celieâ€™s Emancipation in Alice Walkerâ€™s The Color Purpleâ€ in International Journal of Humanities and Social Science Invention (IJHSSI), Volume-4, Issue-2, February 2015, ISSN: 2319-7714, Page no. 1-5.
Padhi, P. K. â€œThe Growing Importance of Soft Skills in the Workplaceâ€ in Sahitya Anand: An Inter-Disciplinary Referred International Research Journal, Vol â€“ I, Issue â€“ 12, ISSN: 2320-5075.
Padhi, P. K. â€œA Study of Celieâ€™s Emancipation in Alice Walkerâ€™s The Color Purpleâ€ in International Journal of Humanities and Social Science Invention (IJHSSI), Volume-4, Issue-2, February 2015, ISSN: 2319-7714, Page no. 1-5.
Padhi, P. K. â€œThe Growing Importance of Soft Skills in the Workplaceâ€ in Sahitya Anand: An Inter-Disciplinary Referred International Research Journal, Vol â€“ I, Issue â€“ 12, ISSN: 2320-5075.
Padhi, P. K. â€œA Study of Celieâ€™s Emancipation in Alice Walkerâ€™s The Color Purpleâ€ in International Journal of Humanities and Social Science Invention (IJHSSI), Volume-4, Issue-2, February 2015, ISSN: 2319-7714, Page no. 1-5.
Padhi, P. K. â€œThe Growing Importance of Soft Skills in the Workplaceâ€ in Sahitya Anand: An Inter-Disciplinary Referred International Research Journal, Vol â€“ I, Issue â€“ 12, ISSN: 2320-5075.
G C Pradhan, S Dash and S K Swain*, â€œBarrier properties of nano silicon carbide designed chitosan nanocompositesâ€ Carbohydrate polymer (Elsevier), 134, 60-65 (2015) DOI;10.1016/j. carbpol.2015.06.081 (Impact Factor: 6.044)
S Gantayat, G Prusty, D R Rout and S K Swain* â€œEffect of graphite platelets on thermal and mechanical properties of epoxy resinâ€ New Carbon Material (Elsevier), 30(5), 432-437 (2015). DOI: 10.1016/S187-5805(15)6020-1 (Impact Factor: 1.171)
S Barik, S K Kisku, L Behera and S K Swain* â€œEnhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxideâ€ Polymer Composites (Wiley), 36(11), 2140-2144 (2015). DOI: 10.1002/pc.23130 (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain*, â€œBarrier properties of nano silicon carbide designed chitosan nanocompositesâ€ Carbohydrate polymer (Elsevier), 134, 60-65 (2015) DOI;10.1016/j. carbpol.2015.06.081 (Impact Factor: 6.044)
S Gantayat, G Prusty, D R Rout and S K Swain* â€œEffect of graphite platelets on thermal and mechanical properties of epoxy resinâ€ New Carbon Material (Elsevier), 30(5), 432-437 (2015). DOI: 10.1016/S187-5805(15)6020-1 (Impact Factor: 1.171)
S Barik, S K Kisku, L Behera and S K Swain* â€œEnhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxideâ€ Polymer Composites (Wiley), 36(11), 2140-2144 (2015). DOI: 10.1002/pc.23130 (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain*, â€œBarrier properties of nano silicon carbide designed chitosan nanocompositesâ€ Carbohydrate polymer (Elsevier), 134, 60-65 (2015) DOI;10.1016/j. carbpol.2015.06.081 (Impact Factor: 6.044)
S Gantayat, G Prusty, D R Rout and S K Swain* â€œEffect of graphite platelets on thermal and mechanical properties of epoxy resinâ€ New Carbon Material (Elsevier), 30(5), 432-437 (2015). DOI: 10.1016/S187-5805(15)6020-1 (Impact Factor: 1.171)
S Barik, S K Kisku, L Behera and S K Swain* â€œEnhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxideâ€ Polymer Composites (Wiley), 36(11), 2140-2144 (2015). DOI: 10.1002/pc.23130 (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain*, â€œBarrier properties of nano silicon carbide designed chitosan nanocompositesâ€ Carbohydrate polymer (Elsevier), 134, 60-65 (2015) DOI;10.1016/j. carbpol.2015.06.081 (Impact Factor: 6.044)
S Gantayat, G Prusty, D R Rout and S K Swain* â€œEffect of graphite platelets on thermal and mechanical properties of epoxy resinâ€ New Carbon Material (Elsevier), 30(5), 432-437 (2015). DOI: 10.1016/S187-5805(15)6020-1 (Impact Factor: 1.171)
S Barik, S K Kisku, L Behera and S K Swain* â€œEnhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxideâ€ Polymer Composites (Wiley), 36(11), 2140-2144 (2015). DOI: 10.1002/pc.23130 (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain*, â€œBarrier properties of nano silicon carbide designed chitosan nanocompositesâ€ Carbohydrate polymer (Elsevier), 134, 60-65 (2015) DOI;10.1016/j. carbpol.2015.06.081 (Impact Factor: 6.044)
S Gantayat, G Prusty, D R Rout and S K Swain* â€œEffect of graphite platelets on thermal and mechanical properties of epoxy resinâ€ New Carbon Material (Elsevier), 30(5), 432-437 (2015). DOI: 10.1016/S187-5805(15)6020-1 (Impact Factor: 1.171)
S Barik, S K Kisku, L Behera and S K Swain* â€œEnhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxideâ€ Polymer Composites (Wiley), 36(11), 2140-2144 (2015). DOI: 10.1002/pc.23130 (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain*, â€œBarrier properties of nano silicon carbide designed chitosan nanocompositesâ€ Carbohydrate polymer (Elsevier), 134, 60-65 (2015) DOI;10.1016/j. carbpol.2015.06.081 (Impact Factor: 6.044)
S Gantayat, G Prusty, D R Rout and S K Swain* â€œEffect of graphite platelets on thermal and mechanical properties of epoxy resinâ€ New Carbon Material (Elsevier), 30(5), 432-437 (2015). DOI: 10.1016/S187-5805(15)6020-1 (Impact Factor: 1.171)
S Barik, S K Kisku, L Behera and S K Swain* â€œEnhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxideâ€ Polymer Composites (Wiley), 36(11), 2140-2144 (2015). DOI: 10.1002/pc.23130 (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain*, â€œBarrier properties of nano silicon carbide designed chitosan nanocompositesâ€ Carbohydrate polymer (Elsevier), 134, 60-65 (2015) DOI;10.1016/j. carbpol.2015.06.081 (Impact Factor: 6.044)
S Gantayat, G Prusty, D R Rout and S K Swain* â€œEffect of graphite platelets on thermal and mechanical properties of epoxy resinâ€ New Carbon Material (Elsevier), 30(5), 432-437 (2015). DOI: 10.1016/S187-5805(15)6020-1 (Impact Factor: 1.171)
S Barik, S K Kisku, L Behera and S K Swain* â€œEnhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxideâ€ Polymer Composites (Wiley), 36(11), 2140-2144 (2015). DOI: 10.1002/pc.23130 (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain*, â€œBarrier properties of nano silicon carbide designed chitosan nanocompositesâ€ Carbohydrate polymer (Elsevier), 134, 60-65 (2015) DOI;10.1016/j. carbpol.2015.06.081 (Impact Factor: 6.044)
S Gantayat, G Prusty, D R Rout and S K Swain* â€œEffect of graphite platelets on thermal and mechanical properties of epoxy resinâ€ New Carbon Material (Elsevier), 30(5), 432-437 (2015). DOI: 10.1016/S187-5805(15)6020-1 (Impact Factor: 1.171)
S Barik, S K Kisku, L Behera and S K Swain* â€œEnhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxideâ€ Polymer Composites (Wiley), 36(11), 2140-2144 (2015). DOI: 10.1002/pc.23130 (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain*, â€œBarrier properties of nano silicon carbide designed chitosan nanocompositesâ€ Carbohydrate polymer (Elsevier), 134, 60-65 (2015) DOI;10.1016/j. carbpol.2015.06.081 (Impact Factor: 6.044)
S Gantayat, G Prusty, D R Rout and S K Swain* â€œEffect of graphite platelets on thermal and mechanical properties of epoxy resinâ€ New Carbon Material (Elsevier), 30(5), 432-437 (2015). DOI: 10.1016/S187-5805(15)6020-1 (Impact Factor: 1.171)
S Barik, S K Kisku, L Behera and S K Swain* â€œEnhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxideâ€ Polymer Composites (Wiley), 36(11), 2140-2144 (2015). DOI: 10.1002/pc.23130 (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain*, â€œBarrier properties of nano silicon carbide designed chitosan nanocompositesâ€ Carbohydrate polymer (Elsevier), 134, 60-65 (2015) DOI;10.1016/j. carbpol.2015.06.081 (Impact Factor: 6.044)
S Gantayat, G Prusty, D R Rout and S K Swain* â€œEffect of graphite platelets on thermal and mechanical properties of epoxy resinâ€ New Carbon Material (Elsevier), 30(5), 432-437 (2015). DOI: 10.1016/S187-5805(15)6020-1 (Impact Factor: 1.171)
S Barik, S K Kisku, L Behera and S K Swain* â€œEnhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxideâ€ Polymer Composites (Wiley), 36(11), 2140-2144 (2015). DOI: 10.1002/pc.23130 (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain*, â€œBarrier properties of nano silicon carbide designed chitosan nanocompositesâ€ Carbohydrate polymer (Elsevier), 134, 60-65 (2015) DOI;10.1016/j. carbpol.2015.06.081 (Impact Factor: 6.044)
S Gantayat, G Prusty, D R Rout and S K Swain* â€œEffect of graphite platelets on thermal and mechanical properties of epoxy resinâ€ New Carbon Material (Elsevier), 30(5), 432-437 (2015). DOI: 10.1016/S187-5805(15)6020-1 (Impact Factor: 1.171)
S Barik, S K Kisku, L Behera and S K Swain* â€œEnhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxideâ€ Polymer Composites (Wiley), 36(11), 2140-2144 (2015). DOI: 10.1002/pc.23130 (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain*, â€œBarrier properties of nano silicon carbide designed chitosan nanocompositesâ€ Carbohydrate polymer (Elsevier), 134, 60-65 (2015) DOI;10.1016/j. carbpol.2015.06.081 (Impact Factor: 6.044)
S Gantayat, G Prusty, D R Rout and S K Swain* â€œEffect of graphite platelets on thermal and mechanical properties of epoxy resinâ€ New Carbon Material (Elsevier), 30(5), 432-437 (2015). DOI: 10.1016/S187-5805(15)6020-1 (Impact Factor: 1.171)
S Barik, S K Kisku, L Behera and S K Swain* â€œEnhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxideâ€ Polymer Composites (Wiley), 36(11), 2140-2144 (2015). DOI: 10.1002/pc.23130 (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain*, â€œBarrier properties of nano silicon carbide designed chitosan nanocompositesâ€ Carbohydrate polymer (Elsevier), 134, 60-65 (2015) DOI;10.1016/j. carbpol.2015.06.081 (Impact Factor: 6.044)
S Gantayat, G Prusty, D R Rout and S K Swain* â€œEffect of graphite platelets on thermal and mechanical properties of epoxy resinâ€ New Carbon Material (Elsevier), 30(5), 432-437 (2015). DOI: 10.1016/S187-5805(15)6020-1 (Impact Factor: 1.171)
S Barik, S K Kisku, L Behera and S K Swain* â€œEnhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxideâ€ Polymer Composites (Wiley), 36(11), 2140-2144 (2015). DOI: 10.1002/pc.23130 (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain*, â€œBarrier properties of nano silicon carbide designed chitosan nanocompositesâ€ Carbohydrate polymer (Elsevier), 134, 60-65 (2015) DOI;10.1016/j. carbpol.2015.06.081 (Impact Factor: 6.044)
S Gantayat, G Prusty, D R Rout and S K Swain* â€œEffect of graphite platelets on thermal and mechanical properties of epoxy resinâ€ New Carbon Material (Elsevier), 30(5), 432-437 (2015). DOI: 10.1016/S187-5805(15)6020-1 (Impact Factor: 1.171)
S Barik, S K Kisku, L Behera and S K Swain* â€œEnhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxideâ€ Polymer Composites (Wiley), 36(11), 2140-2144 (2015). DOI: 10.1002/pc.23130 (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain*, â€œBarrier properties of nano silicon carbide designed chitosan nanocompositesâ€ Carbohydrate polymer (Elsevier), 134, 60-65 (2015) DOI;10.1016/j. carbpol.2015.06.081 (Impact Factor: 6.044)
S Gantayat, G Prusty, D R Rout and S K Swain* â€œEffect of graphite platelets on thermal and mechanical properties of epoxy resinâ€ New Carbon Material (Elsevier), 30(5), 432-437 (2015). DOI: 10.1016/S187-5805(15)6020-1 (Impact Factor: 1.171)
S Barik, S K Kisku, L Behera and S K Swain* â€œEnhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxideâ€ Polymer Composites (Wiley), 36(11), 2140-2144 (2015). DOI: 10.1002/pc.23130 (Impact Factor: 2.262)
R. Pradhan, B. Rout, "Enhancement of Stability of SMIB using ZN-PID and LQR-PSS as affected by Excitation Control", IEEE conference on Power,Communication and Information Technology Conference (PCITC- 2015), 15-17 Oct-2015,iksha O Anusandhan University, Bhubaneswar, India. 10.1109/PCITC.2015.7438103
R. Pradhan, B. Rout, "Enhancement of Stability of SMIB using ZN-PID and LQR-PSS as affected by Excitation Control", IEEE conference on Power,Communication and Information Technology Conference (PCITC- 2015), 15-17 Oct-2015,iksha O Anusandhan University, Bhubaneswar, India. 10.1109/PCITC.2015.7438103
R. Pradhan, B. Rout, "Enhancement of Stability of SMIB using ZN-PID and LQR-PSS as affected by Excitation Control", IEEE conference on Power,Communication and Information Technology Conference (PCITC- 2015), 15-17 Oct-2015,iksha O Anusandhan University, Bhubaneswar, India. 10.1109/PCITC.2015.7438103
R. Pradhan, B. Rout, "Enhancement of Stability of SMIB using ZN-PID and LQR-PSS as affected by Excitation Control", IEEE conference on Power,Communication and Information Technology Conference (PCITC- 2015), 15-17 Oct-2015,iksha O Anusandhan University, Bhubaneswar, India. 10.1109/PCITC.2015.7438103
R. Pradhan, B. Rout, "Enhancement of Stability of SMIB using ZN-PID and LQR-PSS as affected by Excitation Control", IEEE conference on Power,Communication and Information Technology Conference (PCITC- 2015), 15-17 Oct-2015,iksha O Anusandhan University, Bhubaneswar, India. 10.1109/PCITC.2015.7438103
R. Pradhan, B. Rout, "Enhancement of Stability of SMIB using ZN-PID and LQR-PSS as affected by Excitation Control", IEEE conference on Power,Communication and Information Technology Conference (PCITC- 2015), 15-17 Oct-2015,iksha O Anusandhan University, Bhubaneswar, India. 10.1109/PCITC.2015.7438103
Biswal, T., Behera, P., Sahoo, P.K. (2015) Microwave Assisted Synthesis and Gas Barrier Properties of PMMA/CLAY Nanocomposite, European Journal of Biomedical and Pharmaceutical sciences, 2, 479-482
R. Pradhan, B. Rout, "Enhancement of Stability of SMIB using ZN-PID and LQR-PSS as affected by Excitation Control", IEEE conference on Power,Communication and Information Technology Conference (PCITC- 2015), 15-17 Oct-2015,iksha O Anusandhan University, Bhubaneswar, India. 10.1109/PCITC.2015.7438103
R. Pradhan, B. Rout, "Enhancement of Stability of SMIB using ZN-PID and LQR-PSS as affected by Excitation Control", IEEE conference on Power,Communication and Information Technology Conference (PCITC- 2015), 15-17 Oct-2015,iksha O Anusandhan University, Bhubaneswar, India. 10.1109/PCITC.2015.7438103
R. Pradhan, B. Rout, "Enhancement of Stability of SMIB using ZN-PID and LQR-PSS as affected by Excitation Control", IEEE conference on Power,Communication and Information Technology Conference (PCITC- 2015), 15-17 Oct-2015,iksha O Anusandhan University, Bhubaneswar, India. 10.1109/PCITC.2015.7438103
R. Pradhan, B. Rout, "Enhancement of Stability of SMIB using ZN-PID and LQR-PSS as affected by Excitation Control", IEEE conference on Power,Communication and Information Technology Conference (PCITC- 2015), 15-17 Oct-2015,iksha O Anusandhan University, Bhubaneswar, India. 10.1109/PCITC.2015.7438103
R. Pradhan, B. Rout, "Enhancement of Stability of SMIB using ZN-PID and LQR-PSS as affected by Excitation Control", IEEE conference on Power,Communication and Information Technology Conference (PCITC- 2015), 15-17 Oct-2015,iksha O Anusandhan University, Bhubaneswar, India. 10.1109/PCITC.2015.7438103
R. Pradhan, B. Rout, "Enhancement of Stability of SMIB using ZN-PID and LQR-PSS as affected by Excitation Control", IEEE conference on Power,Communication and Information Technology Conference (PCITC- 2015), 15-17 Oct-2015,iksha O Anusandhan University, Bhubaneswar, India. 10.1109/PCITC.2015.7438103
R. Pradhan, B. Rout, "Enhancement of Stability of SMIB using ZN-PID and LQR-PSS as affected by Excitation Control", IEEE conference on Power,Communication and Information Technology Conference (PCITC- 2015), 15-17 Oct-2015,iksha O Anusandhan University, Bhubaneswar, India. 10.1109/PCITC.2015.7438103
R. Pradhan, B. Rout, "Enhancement of Stability of SMIB using ZN-PID and LQR-PSS as affected by Excitation Control", IEEE conference on Power,Communication and Information Technology Conference (PCITC- 2015), 15-17 Oct-2015,iksha O Anusandhan University, Bhubaneswar, India. 10.1109/PCITC.2015.7438103
R. Pradhan, B. Rout, "Enhancement of Stability of SMIB using ZN-PID and LQR-PSS as affected by Excitation Control", IEEE conference on Power,Communication and Information Technology Conference (PCITC- 2015), 15-17 Oct-2015,iksha O Anusandhan University, Bhubaneswar, India. 10.1109/PCITC.2015.7438103
R. Pradhan, B. Rout, "Enhancement of Stability of SMIB using ZN-PID and LQR-PSS as affected by Excitation Control", IEEE conference on Power,Communication and Information Technology Conference (PCITC- 2015), 15-17 Oct-2015,iksha O Anusandhan University, Bhubaneswar, India. 10.1109/PCITC.2015.7438103
R. Pradhan, B. Rout, "Enhancement of Stability of SMIB using ZN-PID and LQR-PSS as affected by Excitation Control", IEEE conference on Power,Communication and Information Technology Conference (PCITC- 2015), 15-17 Oct-2015,iksha O Anusandhan University, Bhubaneswar, India. 10.1109/PCITC.2015.7438103
R. Pradhan, B. Rout, "Enhancement of Stability of SMIB using ZN-PID and LQR-PSS as affected by Excitation Control", IEEE conference on Power,Communication and Information Technology Conference (PCITC- 2015), 15-17 Oct-2015,iksha O Anusandhan University, Bhubaneswar, India. 10.1109/PCITC.2015.7438103
Padhi, P. K. â€œA Study of Celieâ€™s Emancipation in Alice Walkerâ€™s The Color Purpleâ€ in International Journal of Humanities and Social Science Invention (IJHSSI), Volume-4, Issue-2, February 2015, ISSN: 2319-7714, Page no. 1-5.
Padhi, P. K. â€œThe Growing Importance of Soft Skills in the Workplaceâ€ in Sahitya Anand: An Inter-Disciplinary Referred International Research Journal, Vol â€“ I, Issue â€“ 12, ISSN: 2320-5075.
S Panda, D Mishra, BB Biswal, P Nanda Optimization of multiple response characteristics of EDM process using taguchi-based grey relational analysis and modified PSO Journal of Advanced Manufacturing Systems 14 (03), 123-148
S Panda, SN Panda, P Nanda, D Mishra Comparative study on optimum design of rolling element bearing Tribology International 92, 595-604
P. Patro, R. Gupta, and A. Khuntia. Numerical Study for the Prediction of Heat Transfer in a Pulsating Turbulent Flow in a Pipe, Procedia Engineering, 127 (2015), 854-861.
A. K. Barik, A. Mukherjee and P. Patro, Heat transfer enhancement from a mini rectangular channel with different surface protrusions by a turbulent cross flow jet, International Journal of Thermal Science, 98 (2015), 32-41.
Sarakar, L., Biswal, S.K., Panigrahi, R. and Sarkar, B., 2015, ‘Estimation of Filtration Potential of an Effective Biosand Filter for Removal of Iron, Turbidity from Various Sources of water’, Current World Environment, June 2015, 10(2),656-662
K. P. Shadangi and K. Mohanty, Co-pyrolysis of Karanja and Niger seeds with waste polystyrene to produce liquid fuel. Fuel 153 (2015) 492-498.
Sucheta Panda “Edge Detection of Images:An Improved Approach”, International Journal of Research in Computer Science (ISSN:2349-3828), Vol.2, Issue.4, pp: 8-11, 2015.
Sucheta Panda, K.K.Jena, “An Innovative Approach for Edge Detection of Images”, International Journal of Innovative Science, Engineering and Technology (ISSN:2348-7948), Vol.2, Issue.4, pp: 161-176, April, 2015.
Lakra, Atul Vikas, and Dharmendra Kumar Yadav. "Multi-objective tasks scheduling algorithm for cloud computing throughput optimization." Procedia Computer Science 48 (2015): 107-113.
G Shial, SK Majhi, D.B. Phatak, A Comparison Study for File Synchronisation, Procedia Computer Science 48, page 133-141, 2015.
SK Majhi, G Shial, Challenges in Big Data Cloud Computing And Future Research Prospects, SmartCR 5 (4), page 340-345, 2015.
G. Shial, S.K. Majhi, Techniques for file Synchronisation: A Survey, Journal of Global Research in ComputerScience 5 (11) page 1-4, 2015.
Panigrahi, S. K., Deb, A. and Bhattacharyya, S. K. (2015), “Modes of failure in shear deficient RC T- beams strengthened with FRP”, Journal of Composites for Construction, ASCE (SCIE-IF-4.21), 20(1), 04015029-1 to 04015029-9, https://doi.org/10.1061/(ASCE)CC.1943-5614.0000586.
Panigrahi, S. K., Deb, A. and Bhattacharyya, S. K. (2015) “Effect of laminate stiffness on failure mode in FRP wrapped T beams”. International Journal of Research in Engineering and Technology, Vol-4, No-13, pp.510-520, DOI: 10.15623/ijret.2015. 0425074, Link: http://ijret.esatjournals.org/Archive?VI=20150425.
S. G. K. Patro, P. P. Sahoo, I. Panda, and K. K. Sahu, â€œTechnical Analysis on Financial Forecasting,â€ 2015, [Online]. Available: http://arxiv.org/abs/1503.03011
S. G. K. Patro and K. K. sahu, â€œNormalization: A Preprocessing Stage,â€ Iarjset, pp. 20â€“22, 2015, doi: 10.17148/iarjset.2015.2305.
P. L. Praveen, D. S. Ramakrishna, Int. J. Adv. Res. J. Sci. Engg. Technol., 2 (2015) 92. Charge Distribution and UV Absorption Spectra of Liquid Crystals with Structural Element [closo-B10H10] 2- : A Theoretical Approach, DOI 10.17148/IARJSET.2015.21217
T. Ravinder, S.S Kaki, S. Kanjilal, B.V.S.K. Rao, S.K.Swain, R.B.N. Prasad â€œ Refining of castor and tapioca leaf fed eri silkworm oilsâ€ International Journal of Chemical Science and Technology, 5(2), 32-37 (2015). ISSN: 2249-8532 (Impact Factor: NA)
T. Ravinder, S. S Kaki, I.N.S.S. Prabhakar, B.V.S.K. Rao, S. K. Swain, R.B.N. Prasad â€œEffect of natural and synthetic antioxidants on oxidation of ERI silkworm oilsâ€ Indo American Journal of Pharmaceutical research,5(11), 3666-3675 (2015). ISSN No. 2231-6876. DOI: 10.1044/1980-iajpr.151202 (Impact Factor: NA)
G C Pradhan, S Dash and S K Swain*, â€œBarrier properties of nano silicon carbide designed chitosan nanocompositesâ€ Carbohydrate polymer (Elsevier), 134, 60-65 (2015) DOI;10.1016/j. carbpol.2015.06.081 (Impact Factor: 6.044)
S Gantayat, G Prusty, D R Rout and S K Swain* â€œEffect of graphite platelets on thermal and mechanical properties of epoxy resinâ€ New Carbon Material (Elsevier), 30(5), 432-437 (2015). DOI: 10.1016/S187-5805(15)6020-1 (Impact Factor: 1.171)
S Barik, S K Kisku, L Behera and S K Swain* â€œEnhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxideâ€ Polymer Composites (Wiley), 36(11), 2140-2144 (2015). DOI: 10.1002/pc.23130 (Impact Factor: 2.262)
S. Behera, S. Sahoo and B.B. Pati, “A review on optimization algorithms and application to wind energy integration to grid,” in Renewable & Sustainable Energy Reviews (Elsevier), vol. 48, pp. 214–227 2015. (SCI). DOI: https://doi.org/10.1016/j.rser.2015.03.066 ISSN: 1364-0321 IF 16.799
Prasanna Kumar Biswal, and Deepak Kumar Lal and Bidyadhar Rout, "Distributed Generation: Benefits, Issues and Challenges", Grenze Inernational Journal of Engineering and Technology, Volume 1, Issue 1, 2015, pp. 30-36.
Deepak Kumar Lal, and Prasanna Kumar Biswal, "Distributed Generation Allocation and Sizing in Radial Distribution System using Firefly Optimization Algorithm", International Journal of Engineering Research (IJER), Volume 4, Special Issue 1, 2015, pp. 19-24.
Narasingh Deep, Punyapriya Mishra, Fabrication, Modeling and Analysis of The Erosive Wear Properties of Multi Walled Carbon Nanotube Reinforced PMMA Composite Using Taguchi Approach, Int. J. Recent Sci. Res, 6, 10, 6802-6806
Sasmita Behera, Subham Sahoo and B.B. Pati,(2015), “A review on Optimisation Algorithms and application to Wind Energy Integration to Grid”, Renewable & Sustainable Energy Reviews-Elsiver Sc. Publication (DOI-10.1016/j.rser.2015.03.066.
Bikramaditya Das, B.Subudhi, and B.B. Pati,(2015) “Control Coordination of a Team of underwater vehicle”, ELECTRICAL INDIA, Vol. 55 (03) March 2015 page 76-79.
Bikramaditya Das, B.Subudhi, and B.B. Pati,(2015) “Co-operative control coordination of a team of underwater vehicles with communication constraints”, Transactions of the Institute of Measurement and Control (Sage Publication), 2015 page 1-19.
Bikramaditya Das, B.Subudhi, and B.B. Pati,(2015), “Employing nonlinear observer for formation control of AUVs under communication constraints”, International Journal of Intelligent Unmanned Systems, (Emerald Publication) Vol.3, issue 2/3, pp.122-155, Nov.2015.
Punyapriya Mishra & Tanushree Bera. “Fabrication and characterization of composite using carbon black-waste from petroleum products.” International Journal of Advanced Research (IJAR), Volume 2, Issue 7, 122-130
Punyapriya Mishra, “Mechanical behavior of bagasse fiber reinforced epoxy composites at liquid nitrogen temperature”. Journal of Solid waste Technology and Management, Vol. 40, No.3, Page No.197-202
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
G C Pradhan, S Dash and S K Swain* â€œEffect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starchâ€ Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
A K Pradhan, G Prusty and S K Swain* â€œCharacterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubesâ€, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
S K Swain*, S K Kisku and G Sahoo â€œPreparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain* â€œEffect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starchâ€Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidoneFibers and Polymersâ€ Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
S K Swain*, S Dash, S K Kisku, R K Singh â€œThermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowderâ€ Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
S K Swain*, S Patra and S K Kisku, â€œStudy of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocompositesâ€ Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
S K Kisku, S Dash and S K Swain* â€œDispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Propertiesâ€ Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
S K Swain*, G Prustry, Ashis S Ray and L Behera â€œDispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization techniqueâ€ Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
A Sarangi, G Nath*, S K Swain* and R Paikray â€œChemical modification of natural fibers with acetone blended alcoholâ€ Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: â€Ž0.42).
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
G Prusty, R Das and S K Swain* â€œInfluence of functionalized single-walled carbon nanotubes on morphology, conducting and oxygen barrier properties of poly (acrylonitrile-co-starch)â€ Composites Part B: Engineering (Elsevier), 62, 236-241 (2014). DOI: 10.1016/j.compositesb.2014.03.006 (Impact Factor: 6.864)
G C Pradhan, S Dash and S K Swain* â€œEffect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starchâ€ Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
A K Pradhan, G Prusty and S K Swain* â€œCharacterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubesâ€, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
S K Swain*, S K Kisku and G Sahoo â€œPreparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain* â€œEffect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starchâ€Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidoneFibers and Polymersâ€ Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
S K Swain*, S Dash, S K Kisku, R K Singh â€œThermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowderâ€ Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
S K Swain*, S Patra and S K Kisku, â€œStudy of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocompositesâ€ Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
S K Kisku, S Dash and S K Swain* â€œDispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Propertiesâ€ Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
S K Swain*, G Prustry, Ashis S Ray and L Behera â€œDispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization techniqueâ€ Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
A Sarangi, G Nath*, S K Swain* and R Paikray â€œChemical modification of natural fibers with acetone blended alcoholâ€ Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: â€Ž0.42).
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
G Prusty, R Das and S K Swain* â€œInfluence of functionalized single-walled carbon nanotubes on morphology, conducting and oxygen barrier properties of poly (acrylonitrile-co-starch)â€ Composites Part B: Engineering (Elsevier), 62, 236-241 (2014). DOI: 10.1016/j.compositesb.2014.03.006 (Impact Factor: 6.864)
G C Pradhan, S Dash and S K Swain* â€œEffect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starchâ€ Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
A K Pradhan, G Prusty and S K Swain* â€œCharacterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubesâ€, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
S K Swain*, S K Kisku and G Sahoo â€œPreparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain* â€œEffect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starchâ€Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidoneFibers and Polymersâ€ Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
S K Swain*, S Dash, S K Kisku, R K Singh â€œThermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowderâ€ Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
S K Swain*, S Patra and S K Kisku, â€œStudy of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocompositesâ€ Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
S K Kisku, S Dash and S K Swain* â€œDispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Propertiesâ€ Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
S K Swain*, G Prustry, Ashis S Ray and L Behera â€œDispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization techniqueâ€ Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
A Sarangi, G Nath*, S K Swain* and R Paikray â€œChemical modification of natural fibers with acetone blended alcoholâ€ Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: â€Ž0.42).
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
G Prusty, R Das and S K Swain* â€œInfluence of functionalized single-walled carbon nanotubes on morphology, conducting and oxygen barrier properties of poly (acrylonitrile-co-starch)â€ Composites Part B: Engineering (Elsevier), 62, 236-241 (2014). DOI: 10.1016/j.compositesb.2014.03.006 (Impact Factor: 6.864)
G C Pradhan, S Dash and S K Swain* â€œEffect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starchâ€ Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
A K Pradhan, G Prusty and S K Swain* â€œCharacterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubesâ€, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
S K Swain*, S K Kisku and G Sahoo â€œPreparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain* â€œEffect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starchâ€Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidoneFibers and Polymersâ€ Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
S K Swain*, S Dash, S K Kisku, R K Singh â€œThermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowderâ€ Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
S K Swain*, S Patra and S K Kisku, â€œStudy of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocompositesâ€ Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
S K Kisku, S Dash and S K Swain* â€œDispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Propertiesâ€ Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
S K Swain*, G Prustry, Ashis S Ray and L Behera â€œDispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization techniqueâ€ Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
A Sarangi, G Nath*, S K Swain* and R Paikray â€œChemical modification of natural fibers with acetone blended alcoholâ€ Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: â€Ž0.42).
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
G Prusty, R Das and S K Swain* â€œInfluence of functionalized single-walled carbon nanotubes on morphology, conducting and oxygen barrier properties of poly (acrylonitrile-co-starch)â€ Composites Part B: Engineering (Elsevier), 62, 236-241 (2014). DOI: 10.1016/j.compositesb.2014.03.006 (Impact Factor: 6.864)
G C Pradhan, S Dash and S K Swain* â€œEffect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starchâ€ Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
A K Pradhan, G Prusty and S K Swain* â€œCharacterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubesâ€, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
S K Swain*, S K Kisku and G Sahoo â€œPreparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain* â€œEffect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starchâ€Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidoneFibers and Polymersâ€ Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
S K Swain*, S Dash, S K Kisku, R K Singh â€œThermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowderâ€ Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
S K Swain*, S Patra and S K Kisku, â€œStudy of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocompositesâ€ Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
S K Kisku, S Dash and S K Swain* â€œDispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Propertiesâ€ Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
S K Swain*, G Prustry, Ashis S Ray and L Behera â€œDispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization techniqueâ€ Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
A Sarangi, G Nath*, S K Swain* and R Paikray â€œChemical modification of natural fibers with acetone blended alcoholâ€ Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: â€Ž0.42).
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
G Prusty, R Das and S K Swain* â€œInfluence of functionalized single-walled carbon nanotubes on morphology, conducting and oxygen barrier properties of poly (acrylonitrile-co-starch)â€ Composites Part B: Engineering (Elsevier), 62, 236-241 (2014). DOI: 10.1016/j.compositesb.2014.03.006 (Impact Factor: 6.864)
G C Pradhan, S Dash and S K Swain* â€œEffect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starchâ€ Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
A K Pradhan, G Prusty and S K Swain* â€œCharacterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubesâ€, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
S K Swain*, S K Kisku and G Sahoo â€œPreparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain* â€œEffect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starchâ€Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidoneFibers and Polymersâ€ Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
S K Swain*, S Dash, S K Kisku, R K Singh â€œThermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowderâ€ Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
S K Swain*, S Patra and S K Kisku, â€œStudy of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocompositesâ€ Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
S K Kisku, S Dash and S K Swain* â€œDispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Propertiesâ€ Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
S K Swain*, G Prustry, Ashis S Ray and L Behera â€œDispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization techniqueâ€ Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
A Sarangi, G Nath*, S K Swain* and R Paikray â€œChemical modification of natural fibers with acetone blended alcoholâ€ Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: â€Ž0.42).
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
G Prusty, R Das and S K Swain* â€œInfluence of functionalized single-walled carbon nanotubes on morphology, conducting and oxygen barrier properties of poly (acrylonitrile-co-starch)â€ Composites Part B: Engineering (Elsevier), 62, 236-241 (2014). DOI: 10.1016/j.compositesb.2014.03.006 (Impact Factor: 6.864)
G C Pradhan, S Dash and S K Swain* â€œEffect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starchâ€ Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
A K Pradhan, G Prusty and S K Swain* â€œCharacterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubesâ€, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
S K Swain*, S K Kisku and G Sahoo â€œPreparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain* â€œEffect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starchâ€Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidoneFibers and Polymersâ€ Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
S K Swain*, S Dash, S K Kisku, R K Singh â€œThermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowderâ€ Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
S K Swain*, S Patra and S K Kisku, â€œStudy of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocompositesâ€ Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
S K Kisku, S Dash and S K Swain* â€œDispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Propertiesâ€ Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
S K Swain*, G Prustry, Ashis S Ray and L Behera â€œDispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization techniqueâ€ Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
A Sarangi, G Nath*, S K Swain* and R Paikray â€œChemical modification of natural fibers with acetone blended alcoholâ€ Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: â€Ž0.42).
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
G Prusty, R Das and S K Swain* â€œInfluence of functionalized single-walled carbon nanotubes on morphology, conducting and oxygen barrier properties of poly (acrylonitrile-co-starch)â€ Composites Part B: Engineering (Elsevier), 62, 236-241 (2014). DOI: 10.1016/j.compositesb.2014.03.006 (Impact Factor: 6.864)
G C Pradhan, S Dash and S K Swain* â€œEffect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starchâ€ Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
A K Pradhan, G Prusty and S K Swain* â€œCharacterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubesâ€, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
S K Swain*, S K Kisku and G Sahoo â€œPreparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain* â€œEffect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starchâ€Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidoneFibers and Polymersâ€ Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
S K Swain*, S Dash, S K Kisku, R K Singh â€œThermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowderâ€ Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
S K Swain*, S Patra and S K Kisku, â€œStudy of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocompositesâ€ Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
S K Kisku, S Dash and S K Swain* â€œDispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Propertiesâ€ Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
S K Swain*, G Prustry, Ashis S Ray and L Behera â€œDispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization techniqueâ€ Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
A Sarangi, G Nath*, S K Swain* and R Paikray â€œChemical modification of natural fibers with acetone blended alcoholâ€ Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: â€Ž0.42).
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
G Prusty, R Das and S K Swain* â€œInfluence of functionalized single-walled carbon nanotubes on morphology, conducting and oxygen barrier properties of poly (acrylonitrile-co-starch)â€ Composites Part B: Engineering (Elsevier), 62, 236-241 (2014). DOI: 10.1016/j.compositesb.2014.03.006 (Impact Factor: 6.864)
G C Pradhan, S Dash and S K Swain* â€œEffect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starchâ€ Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
A K Pradhan, G Prusty and S K Swain* â€œCharacterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubesâ€, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
S K Swain*, S K Kisku and G Sahoo â€œPreparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain* â€œEffect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starchâ€Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidoneFibers and Polymersâ€ Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
S K Swain*, S Dash, S K Kisku, R K Singh â€œThermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowderâ€ Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
S K Swain*, S Patra and S K Kisku, â€œStudy of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocompositesâ€ Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
S K Kisku, S Dash and S K Swain* â€œDispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Propertiesâ€ Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
S K Swain*, G Prustry, Ashis S Ray and L Behera â€œDispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization techniqueâ€ Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
A Sarangi, G Nath*, S K Swain* and R Paikray â€œChemical modification of natural fibers with acetone blended alcoholâ€ Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: â€Ž0.42).
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
G Prusty, R Das and S K Swain* â€œInfluence of functionalized single-walled carbon nanotubes on morphology, conducting and oxygen barrier properties of poly (acrylonitrile-co-starch)â€ Composites Part B: Engineering (Elsevier), 62, 236-241 (2014). DOI: 10.1016/j.compositesb.2014.03.006 (Impact Factor: 6.864)
G C Pradhan, S Dash and S K Swain* â€œEffect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starchâ€ Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
A K Pradhan, G Prusty and S K Swain* â€œCharacterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubesâ€, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
S K Swain*, S K Kisku and G Sahoo â€œPreparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain* â€œEffect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starchâ€Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidoneFibers and Polymersâ€ Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
S K Swain*, S Dash, S K Kisku, R K Singh â€œThermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowderâ€ Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
S K Swain*, S Patra and S K Kisku, â€œStudy of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocompositesâ€ Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
S K Kisku, S Dash and S K Swain* â€œDispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Propertiesâ€ Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
S K Swain*, G Prustry, Ashis S Ray and L Behera â€œDispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization techniqueâ€ Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
A Sarangi, G Nath*, S K Swain* and R Paikray â€œChemical modification of natural fibers with acetone blended alcoholâ€ Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: â€Ž0.42).
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
G Prusty, R Das and S K Swain* â€œInfluence of functionalized single-walled carbon nanotubes on morphology, conducting and oxygen barrier properties of poly (acrylonitrile-co-starch)â€ Composites Part B: Engineering (Elsevier), 62, 236-241 (2014). DOI: 10.1016/j.compositesb.2014.03.006 (Impact Factor: 6.864)
G C Pradhan, S Dash and S K Swain* â€œEffect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starchâ€ Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
A K Pradhan, G Prusty and S K Swain* â€œCharacterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubesâ€, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
S K Swain*, S K Kisku and G Sahoo â€œPreparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain* â€œEffect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starchâ€Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidoneFibers and Polymersâ€ Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
S K Swain*, S Dash, S K Kisku, R K Singh â€œThermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowderâ€ Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
S K Swain*, S Patra and S K Kisku, â€œStudy of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocompositesâ€ Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
S K Kisku, S Dash and S K Swain* â€œDispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Propertiesâ€ Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
S K Swain*, G Prustry, Ashis S Ray and L Behera â€œDispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization techniqueâ€ Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
A Sarangi, G Nath*, S K Swain* and R Paikray â€œChemical modification of natural fibers with acetone blended alcoholâ€ Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: â€Ž0.42).
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
G Prusty, R Das and S K Swain* â€œInfluence of functionalized single-walled carbon nanotubes on morphology, conducting and oxygen barrier properties of poly (acrylonitrile-co-starch)â€ Composites Part B: Engineering (Elsevier), 62, 236-241 (2014). DOI: 10.1016/j.compositesb.2014.03.006 (Impact Factor: 6.864)
G C Pradhan, S Dash and S K Swain* â€œEffect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starchâ€ Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
A K Pradhan, G Prusty and S K Swain* â€œCharacterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubesâ€, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
S K Swain*, S K Kisku and G Sahoo â€œPreparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain* â€œEffect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starchâ€Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidoneFibers and Polymersâ€ Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
S K Swain*, S Dash, S K Kisku, R K Singh â€œThermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowderâ€ Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
S K Swain*, S Patra and S K Kisku, â€œStudy of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocompositesâ€ Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
S K Kisku, S Dash and S K Swain* â€œDispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Propertiesâ€ Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
S K Swain*, G Prustry, Ashis S Ray and L Behera â€œDispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization techniqueâ€ Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
A Sarangi, G Nath*, S K Swain* and R Paikray â€œChemical modification of natural fibers with acetone blended alcoholâ€ Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: â€Ž0.42).
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
Padhi, P. K. â€œEnglish Competency: The need of the hour for Engineering studentsâ€ in International Journal of English Language, Literature and Humanities (IJELLH), Volume â€“ II, Issue VIII, December 2014, ISSN: 2321-7065, Page no -207.
Padhi, P. K. â€œThe Emergence of Black Literature and the Tragic Portrayal Black Women in the Slave Narrativesâ€ in IOSR Journal of Humanities and Social Science, Volume 19, Issue 11, Ver. IV, Nov. 2014, p-ISSN: 2279- 0845, e-ISSN: 2279- 0837, Page no. 23-28.
Padhi, P. K. â€œThematic Concerns in Zora Neale Hurstonâ€™s Their Eyes Were Watching Godâ€ in IOSR Journal of Humanities and Social Science, Volume 19, Issue 9, Ver. V, Sep. 2014, p-ISSN: 2279- 0845, e-ISSN: 2279- 0837, Page no- 48-52.
Padhi, P. K. â€œThe Rise of Feminism and the Growth of Black American Womenâ€ in IOSR Journal of Humanities and Social Science, Vol-19, Issue-7, Version- IV, July 2014, p-ISSN: 2279- 0845, e-ISSN: 2279- 0837, Page 38-42.
Padhi, P. K. â€œBlack Woman: The Dehumanized and Objectified Self in Alice Walkerâ€™s The Color Purpleâ€ in Researchers World, an International refereed research journal, Vol- V, Issue- 3(I), July 2014, p-ISSN: 2231-4172, e-ISSN: 2229- 4686, Page no- 41.
Padhi, P. K. â€œSoft Skills: Education beyond Academicsâ€ in IOSR Journal of Humanities and Social Science, Vol-19,Issue-5, Version- VI, May 2014, p-ISSN: 2279-0845,e-ISSN: 2279- 0837, Page no- 01.
Padhi, P. K. â€œToni Morrisonâ€™s Projection of Black Womanhood through Pecola and Sethe in The Bluest Eye and Belovedâ€ in Researchers World, an International refereed research journal, Vol- V, Issue- 2, April 2014, p-ISSN: 2231- 4172, e-ISSN: 2229- 4686, Page No-143.
Padhi, P. K. â€œEnglish Competency: The need of the hour for Engineering studentsâ€ in International Journal of English Language, Literature and Humanities (IJELLH), Volume â€“ II, Issue VIII, December 2014, ISSN: 2321-7065, Page no -207.
Padhi, P. K. â€œThe Emergence of Black Literature and the Tragic Portrayal Black Women in the Slave Narrativesâ€ in IOSR Journal of Humanities and Social Science, Volume 19, Issue 11, Ver. IV, Nov. 2014, p-ISSN: 2279- 0845, e-ISSN: 2279- 0837, Page no. 23-28.
Padhi, P. K. â€œThematic Concerns in Zora Neale Hurstonâ€™s Their Eyes Were Watching Godâ€ in IOSR Journal of Humanities and Social Science, Volume 19, Issue 9, Ver. V, Sep. 2014, p-ISSN: 2279- 0845, e-ISSN: 2279- 0837, Page no- 48-52.
Padhi, P. K. â€œThe Rise of Feminism and the Growth of Black American Womenâ€ in IOSR Journal of Humanities and Social Science, Vol-19, Issue-7, Version- IV, July 2014, p-ISSN: 2279- 0845, e-ISSN: 2279- 0837, Page 38-42.
Padhi, P. K. â€œBlack Woman: The Dehumanized and Objectified Self in Alice Walkerâ€™s The Color Purpleâ€ in Researchers World, an International refereed research journal, Vol- V, Issue- 3(I), July 2014, p-ISSN: 2231-4172, e-ISSN: 2229- 4686, Page no- 41.
Padhi, P. K. â€œSoft Skills: Education beyond Academicsâ€ in IOSR Journal of Humanities and Social Science, Vol-19,Issue-5, Version- VI, May 2014, p-ISSN: 2279-0845,e-ISSN: 2279- 0837, Page no- 01.
Padhi, P. K. â€œToni Morrisonâ€™s Projection of Black Womanhood through Pecola and Sethe in The Bluest Eye and Belovedâ€ in Researchers World, an International refereed research journal, Vol- V, Issue- 2, April 2014, p-ISSN: 2231- 4172, e-ISSN: 2229- 4686, Page No-143.
Padhi, P. K. â€œEnglish Competency: The need of the hour for Engineering studentsâ€ in International Journal of English Language, Literature and Humanities (IJELLH), Volume â€“ II, Issue VIII, December 2014, ISSN: 2321-7065, Page no -207.
Padhi, P. K. â€œThe Emergence of Black Literature and the Tragic Portrayal Black Women in the Slave Narrativesâ€ in IOSR Journal of Humanities and Social Science, Volume 19, Issue 11, Ver. IV, Nov. 2014, p-ISSN: 2279- 0845, e-ISSN: 2279- 0837, Page no. 23-28.
Padhi, P. K. â€œThematic Concerns in Zora Neale Hurstonâ€™s Their Eyes Were Watching Godâ€ in IOSR Journal of Humanities and Social Science, Volume 19, Issue 9, Ver. V, Sep. 2014, p-ISSN: 2279- 0845, e-ISSN: 2279- 0837, Page no- 48-52.
Padhi, P. K. â€œThe Rise of Feminism and the Growth of Black American Womenâ€ in IOSR Journal of Humanities and Social Science, Vol-19, Issue-7, Version- IV, July 2014, p-ISSN: 2279- 0845, e-ISSN: 2279- 0837, Page 38-42.
Padhi, P. K. â€œBlack Woman: The Dehumanized and Objectified Self in Alice Walkerâ€™s The Color Purpleâ€ in Researchers World, an International refereed research journal, Vol- V, Issue- 3(I), July 2014, p-ISSN: 2231-4172, e-ISSN: 2229- 4686, Page no- 41.
Padhi, P. K. â€œSoft Skills: Education beyond Academicsâ€ in IOSR Journal of Humanities and Social Science, Vol-19,Issue-5, Version- VI, May 2014, p-ISSN: 2279-0845,e-ISSN: 2279- 0837, Page no- 01.
Padhi, P. K. â€œToni Morrisonâ€™s Projection of Black Womanhood through Pecola and Sethe in The Bluest Eye and Belovedâ€ in Researchers World, an International refereed research journal, Vol- V, Issue- 2, April 2014, p-ISSN: 2231- 4172, e-ISSN: 2229- 4686, Page No-143.
Padhi, P. K. â€œEnglish Competency: The need of the hour for Engineering studentsâ€ in International Journal of English Language, Literature and Humanities (IJELLH), Volume â€“ II, Issue VIII, December 2014, ISSN: 2321-7065, Page no -207.
Padhi, P. K. â€œThe Emergence of Black Literature and the Tragic Portrayal Black Women in the Slave Narrativesâ€ in IOSR Journal of Humanities and Social Science, Volume 19, Issue 11, Ver. IV, Nov. 2014, p-ISSN: 2279- 0845, e-ISSN: 2279- 0837, Page no. 23-28.
Padhi, P. K. â€œThematic Concerns in Zora Neale Hurstonâ€™s Their Eyes Were Watching Godâ€ in IOSR Journal of Humanities and Social Science, Volume 19, Issue 9, Ver. V, Sep. 2014, p-ISSN: 2279- 0845, e-ISSN: 2279- 0837, Page no- 48-52.
Padhi, P. K. â€œThe Rise of Feminism and the Growth of Black American Womenâ€ in IOSR Journal of Humanities and Social Science, Vol-19, Issue-7, Version- IV, July 2014, p-ISSN: 2279- 0845, e-ISSN: 2279- 0837, Page 38-42.
Padhi, P. K. â€œBlack Woman: The Dehumanized and Objectified Self in Alice Walkerâ€™s The Color Purpleâ€ in Researchers World, an International refereed research journal, Vol- V, Issue- 3(I), July 2014, p-ISSN: 2231-4172, e-ISSN: 2229- 4686, Page no- 41.
Padhi, P. K. â€œSoft Skills: Education beyond Academicsâ€ in IOSR Journal of Humanities and Social Science, Vol-19,Issue-5, Version- VI, May 2014, p-ISSN: 2279-0845,e-ISSN: 2279- 0837, Page no- 01.
Padhi, P. K. â€œToni Morrisonâ€™s Projection of Black Womanhood through Pecola and Sethe in The Bluest Eye and Belovedâ€ in Researchers World, an International refereed research journal, Vol- V, Issue- 2, April 2014, p-ISSN: 2231- 4172, e-ISSN: 2229- 4686, Page No-143.
G Prusty, R Das and S K Swain* â€œInfluence of functionalized single-walled carbon nanotubes on morphology, conducting and oxygen barrier properties of poly (acrylonitrile-co-starch)â€ Composites Part B: Engineering (Elsevier), 62, 236-241 (2014). DOI: 10.1016/j.compositesb.2014.03.006 (Impact Factor: 6.864)
G C Pradhan, S Dash and S K Swain* â€œEffect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starchâ€ Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
A K Pradhan, G Prusty and S K Swain* â€œCharacterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubesâ€, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
S K Swain*, S K Kisku and G Sahoo â€œPreparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain* â€œEffect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starchâ€Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidoneFibers and Polymersâ€ Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
S K Swain*, S Dash, S K Kisku, R K Singh â€œThermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowderâ€ Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
S K Swain*, S Patra and S K Kisku, â€œStudy of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocompositesâ€ Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
S K Kisku, S Dash and S K Swain* â€œDispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Propertiesâ€ Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
S K Swain*, G Prustry, Ashis S Ray and L Behera â€œDispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization techniqueâ€ Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
A Sarangi, G Nath*, S K Swain* and R Paikray â€œChemical modification of natural fibers with acetone blended alcoholâ€ Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: â€Ž0.42).
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
G Prusty, R Das and S K Swain* â€œInfluence of functionalized single-walled carbon nanotubes on morphology, conducting and oxygen barrier properties of poly (acrylonitrile-co-starch)â€ Composites Part B: Engineering (Elsevier), 62, 236-241 (2014). DOI: 10.1016/j.compositesb.2014.03.006 (Impact Factor: 6.864)
G C Pradhan, S Dash and S K Swain* â€œEffect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starchâ€ Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
A K Pradhan, G Prusty and S K Swain* â€œCharacterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubesâ€, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
S K Swain*, S K Kisku and G Sahoo â€œPreparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain* â€œEffect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starchâ€Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidoneFibers and Polymersâ€ Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
S K Swain*, S Dash, S K Kisku, R K Singh â€œThermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowderâ€ Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
S K Swain*, S Patra and S K Kisku, â€œStudy of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocompositesâ€ Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
S K Kisku, S Dash and S K Swain* â€œDispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Propertiesâ€ Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
S K Swain*, G Prustry, Ashis S Ray and L Behera â€œDispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization techniqueâ€ Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
A Sarangi, G Nath*, S K Swain* and R Paikray â€œChemical modification of natural fibers with acetone blended alcoholâ€ Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: â€Ž0.42).
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
G Prusty, R Das and S K Swain* â€œInfluence of functionalized single-walled carbon nanotubes on morphology, conducting and oxygen barrier properties of poly (acrylonitrile-co-starch)â€ Composites Part B: Engineering (Elsevier), 62, 236-241 (2014). DOI: 10.1016/j.compositesb.2014.03.006 (Impact Factor: 6.864)
G C Pradhan, S Dash and S K Swain* â€œEffect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starchâ€ Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
A K Pradhan, G Prusty and S K Swain* â€œCharacterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubesâ€, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
S K Swain*, S K Kisku and G Sahoo â€œPreparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain* â€œEffect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starchâ€Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidoneFibers and Polymersâ€ Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
S K Swain*, S Dash, S K Kisku, R K Singh â€œThermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowderâ€ Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
S K Swain*, S Patra and S K Kisku, â€œStudy of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocompositesâ€ Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
S K Kisku, S Dash and S K Swain* â€œDispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Propertiesâ€ Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
S K Swain*, G Prustry, Ashis S Ray and L Behera â€œDispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization techniqueâ€ Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
A Sarangi, G Nath*, S K Swain* and R Paikray â€œChemical modification of natural fibers with acetone blended alcoholâ€ Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: â€Ž0.42).
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
G Prusty, R Das and S K Swain* â€œInfluence of functionalized single-walled carbon nanotubes on morphology, conducting and oxygen barrier properties of poly (acrylonitrile-co-starch)â€ Composites Part B: Engineering (Elsevier), 62, 236-241 (2014). DOI: 10.1016/j.compositesb.2014.03.006 (Impact Factor: 6.864)
G C Pradhan, S Dash and S K Swain* â€œEffect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starchâ€ Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
A K Pradhan, G Prusty and S K Swain* â€œCharacterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubesâ€, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
S K Swain*, S K Kisku and G Sahoo â€œPreparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain* â€œEffect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starchâ€Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidoneFibers and Polymersâ€ Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
S K Swain*, S Dash, S K Kisku, R K Singh â€œThermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowderâ€ Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
S K Swain*, S Patra and S K Kisku, â€œStudy of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocompositesâ€ Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
S K Kisku, S Dash and S K Swain* â€œDispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Propertiesâ€ Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
S K Swain*, G Prustry, Ashis S Ray and L Behera â€œDispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization techniqueâ€ Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
A Sarangi, G Nath*, S K Swain* and R Paikray â€œChemical modification of natural fibers with acetone blended alcoholâ€ Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: â€Ž0.42).
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
G Prusty, R Das and S K Swain* â€œInfluence of functionalized single-walled carbon nanotubes on morphology, conducting and oxygen barrier properties of poly (acrylonitrile-co-starch)â€ Composites Part B: Engineering (Elsevier), 62, 236-241 (2014). DOI: 10.1016/j.compositesb.2014.03.006 (Impact Factor: 6.864)
G C Pradhan, S Dash and S K Swain* â€œEffect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starchâ€ Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
A K Pradhan, G Prusty and S K Swain* â€œCharacterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubesâ€, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
S K Swain*, S K Kisku and G Sahoo â€œPreparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain* â€œEffect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starchâ€Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidoneFibers and Polymersâ€ Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
S K Swain*, S Dash, S K Kisku, R K Singh â€œThermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowderâ€ Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
S K Swain*, S Patra and S K Kisku, â€œStudy of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocompositesâ€ Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
S K Kisku, S Dash and S K Swain* â€œDispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Propertiesâ€ Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
S K Swain*, G Prustry, Ashis S Ray and L Behera â€œDispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization techniqueâ€ Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
A Sarangi, G Nath*, S K Swain* and R Paikray â€œChemical modification of natural fibers with acetone blended alcoholâ€ Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: â€Ž0.42).
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
G Prusty, R Das and S K Swain* â€œInfluence of functionalized single-walled carbon nanotubes on morphology, conducting and oxygen barrier properties of poly (acrylonitrile-co-starch)â€ Composites Part B: Engineering (Elsevier), 62, 236-241 (2014). DOI: 10.1016/j.compositesb.2014.03.006 (Impact Factor: 6.864)
G C Pradhan, S Dash and S K Swain* â€œEffect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starchâ€ Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
A K Pradhan, G Prusty and S K Swain* â€œCharacterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubesâ€, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
S K Swain*, S K Kisku and G Sahoo â€œPreparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain* â€œEffect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starchâ€Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidoneFibers and Polymersâ€ Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
S K Swain*, S Dash, S K Kisku, R K Singh â€œThermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowderâ€ Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
S K Swain*, S Patra and S K Kisku, â€œStudy of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocompositesâ€ Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
S K Kisku, S Dash and S K Swain* â€œDispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Propertiesâ€ Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
S K Swain*, G Prustry, Ashis S Ray and L Behera â€œDispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization techniqueâ€ Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
A Sarangi, G Nath*, S K Swain* and R Paikray â€œChemical modification of natural fibers with acetone blended alcoholâ€ Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: â€Ž0.42).
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
G Prusty, R Das and S K Swain* â€œInfluence of functionalized single-walled carbon nanotubes on morphology, conducting and oxygen barrier properties of poly (acrylonitrile-co-starch)â€ Composites Part B: Engineering (Elsevier), 62, 236-241 (2014). DOI: 10.1016/j.compositesb.2014.03.006 (Impact Factor: 6.864)
G C Pradhan, S Dash and S K Swain* â€œEffect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starchâ€ Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
A K Pradhan, G Prusty and S K Swain* â€œCharacterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubesâ€, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
S K Swain*, S K Kisku and G Sahoo â€œPreparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain* â€œEffect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starchâ€Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidoneFibers and Polymersâ€ Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
S K Swain*, S Dash, S K Kisku, R K Singh â€œThermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowderâ€ Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
S K Swain*, S Patra and S K Kisku, â€œStudy of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocompositesâ€ Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
S K Kisku, S Dash and S K Swain* â€œDispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Propertiesâ€ Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
S K Swain*, G Prustry, Ashis S Ray and L Behera â€œDispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization techniqueâ€ Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
A Sarangi, G Nath*, S K Swain* and R Paikray â€œChemical modification of natural fibers with acetone blended alcoholâ€ Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: â€Ž0.42).
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
G Prusty, R Das and S K Swain* â€œInfluence of functionalized single-walled carbon nanotubes on morphology, conducting and oxygen barrier properties of poly (acrylonitrile-co-starch)â€ Composites Part B: Engineering (Elsevier), 62, 236-241 (2014). DOI: 10.1016/j.compositesb.2014.03.006 (Impact Factor: 6.864)
G C Pradhan, S Dash and S K Swain* â€œEffect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starchâ€ Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
A K Pradhan, G Prusty and S K Swain* â€œCharacterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubesâ€, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
S K Swain*, S K Kisku and G Sahoo â€œPreparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain* â€œEffect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starchâ€Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidoneFibers and Polymersâ€ Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
S K Swain*, S Dash, S K Kisku, R K Singh â€œThermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowderâ€ Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
S K Swain*, S Patra and S K Kisku, â€œStudy of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocompositesâ€ Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
S K Kisku, S Dash and S K Swain* â€œDispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Propertiesâ€ Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
S K Swain*, G Prustry, Ashis S Ray and L Behera â€œDispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization techniqueâ€ Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
A Sarangi, G Nath*, S K Swain* and R Paikray â€œChemical modification of natural fibers with acetone blended alcoholâ€ Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: â€Ž0.42).
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
G Prusty, R Das and S K Swain* â€œInfluence of functionalized single-walled carbon nanotubes on morphology, conducting and oxygen barrier properties of poly (acrylonitrile-co-starch)â€ Composites Part B: Engineering (Elsevier), 62, 236-241 (2014). DOI: 10.1016/j.compositesb.2014.03.006 (Impact Factor: 6.864)
G C Pradhan, S Dash and S K Swain* â€œEffect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starchâ€ Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
A K Pradhan, G Prusty and S K Swain* â€œCharacterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubesâ€, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
S K Swain*, S K Kisku and G Sahoo â€œPreparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain* â€œEffect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starchâ€Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidoneFibers and Polymersâ€ Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
S K Swain*, S Dash, S K Kisku, R K Singh â€œThermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowderâ€ Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
S K Swain*, S Patra and S K Kisku, â€œStudy of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocompositesâ€ Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
S K Kisku, S Dash and S K Swain* â€œDispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Propertiesâ€ Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
S K Swain*, G Prustry, Ashis S Ray and L Behera â€œDispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization techniqueâ€ Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
A Sarangi, G Nath*, S K Swain* and R Paikray â€œChemical modification of natural fibers with acetone blended alcoholâ€ Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: â€Ž0.42).
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
G Prusty, R Das and S K Swain* â€œInfluence of functionalized single-walled carbon nanotubes on morphology, conducting and oxygen barrier properties of poly (acrylonitrile-co-starch)â€ Composites Part B: Engineering (Elsevier), 62, 236-241 (2014). DOI: 10.1016/j.compositesb.2014.03.006 (Impact Factor: 6.864)
G C Pradhan, S Dash and S K Swain* â€œEffect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starchâ€ Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
A K Pradhan, G Prusty and S K Swain* â€œCharacterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubesâ€, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
S K Swain*, S K Kisku and G Sahoo â€œPreparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain* â€œEffect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starchâ€Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidoneFibers and Polymersâ€ Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
S K Swain*, S Dash, S K Kisku, R K Singh â€œThermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowderâ€ Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
S K Swain*, S Patra and S K Kisku, â€œStudy of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocompositesâ€ Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
S K Kisku, S Dash and S K Swain* â€œDispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Propertiesâ€ Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
S K Swain*, G Prustry, Ashis S Ray and L Behera â€œDispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization techniqueâ€ Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
A Sarangi, G Nath*, S K Swain* and R Paikray â€œChemical modification of natural fibers with acetone blended alcoholâ€ Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: â€Ž0.42).
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
G Prusty, R Das and S K Swain* â€œInfluence of functionalized single-walled carbon nanotubes on morphology, conducting and oxygen barrier properties of poly (acrylonitrile-co-starch)â€ Composites Part B: Engineering (Elsevier), 62, 236-241 (2014). DOI: 10.1016/j.compositesb.2014.03.006 (Impact Factor: 6.864)
G C Pradhan, S Dash and S K Swain* â€œEffect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starchâ€ Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
A K Pradhan, G Prusty and S K Swain* â€œCharacterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubesâ€, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
S K Swain*, S K Kisku and G Sahoo â€œPreparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain* â€œEffect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starchâ€Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidoneFibers and Polymersâ€ Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
S K Swain*, S Dash, S K Kisku, R K Singh â€œThermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowderâ€ Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
S K Swain*, S Patra and S K Kisku, â€œStudy of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocompositesâ€ Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
S K Kisku, S Dash and S K Swain* â€œDispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Propertiesâ€ Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
S K Swain*, G Prustry, Ashis S Ray and L Behera â€œDispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization techniqueâ€ Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
A Sarangi, G Nath*, S K Swain* and R Paikray â€œChemical modification of natural fibers with acetone blended alcoholâ€ Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: â€Ž0.42).
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
G Prusty, R Das and S K Swain* â€œInfluence of functionalized single-walled carbon nanotubes on morphology, conducting and oxygen barrier properties of poly (acrylonitrile-co-starch)â€ Composites Part B: Engineering (Elsevier), 62, 236-241 (2014). DOI: 10.1016/j.compositesb.2014.03.006 (Impact Factor: 6.864)
G C Pradhan, S Dash and S K Swain* â€œEffect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starchâ€ Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
A K Pradhan, G Prusty and S K Swain* â€œCharacterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubesâ€, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
S K Swain*, S K Kisku and G Sahoo â€œPreparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain* â€œEffect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starchâ€Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidoneFibers and Polymersâ€ Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
S K Swain*, S Dash, S K Kisku, R K Singh â€œThermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowderâ€ Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
S K Swain*, S Patra and S K Kisku, â€œStudy of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocompositesâ€ Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
S K Kisku, S Dash and S K Swain* â€œDispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Propertiesâ€ Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
S K Swain*, G Prustry, Ashis S Ray and L Behera â€œDispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization techniqueâ€ Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
A Sarangi, G Nath*, S K Swain* and R Paikray â€œChemical modification of natural fibers with acetone blended alcoholâ€ Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: â€Ž0.42).
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
G Prusty, R Das and S K Swain* â€œInfluence of functionalized single-walled carbon nanotubes on morphology, conducting and oxygen barrier properties of poly (acrylonitrile-co-starch)â€ Composites Part B: Engineering (Elsevier), 62, 236-241 (2014). DOI: 10.1016/j.compositesb.2014.03.006 (Impact Factor: 6.864)
G C Pradhan, S Dash and S K Swain* â€œEffect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starchâ€ Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
A K Pradhan, G Prusty and S K Swain* â€œCharacterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubesâ€, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
S K Swain*, S K Kisku and G Sahoo â€œPreparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain* â€œEffect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starchâ€Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidoneFibers and Polymersâ€ Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
S K Swain*, S Dash, S K Kisku, R K Singh â€œThermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowderâ€ Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
S K Swain*, S Patra and S K Kisku, â€œStudy of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocompositesâ€ Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
S K Kisku, S Dash and S K Swain* â€œDispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Propertiesâ€ Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
S K Swain*, G Prustry, Ashis S Ray and L Behera â€œDispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization techniqueâ€ Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
A Sarangi, G Nath*, S K Swain* and R Paikray â€œChemical modification of natural fibers with acetone blended alcoholâ€ Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: â€Ž0.42).
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
G Prusty, R Das and S K Swain* â€œInfluence of functionalized single-walled carbon nanotubes on morphology, conducting and oxygen barrier properties of poly (acrylonitrile-co-starch)â€ Composites Part B: Engineering (Elsevier), 62, 236-241 (2014). DOI: 10.1016/j.compositesb.2014.03.006 (Impact Factor: 6.864)
G C Pradhan, S Dash and S K Swain* â€œEffect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starchâ€ Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
A K Pradhan, G Prusty and S K Swain* â€œCharacterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubesâ€, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
S K Swain*, S K Kisku and G Sahoo â€œPreparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain* â€œEffect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starchâ€Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidoneFibers and Polymersâ€ Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
S K Swain*, S Dash, S K Kisku, R K Singh â€œThermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowderâ€ Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
S K Swain*, S Patra and S K Kisku, â€œStudy of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocompositesâ€ Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
S K Kisku, S Dash and S K Swain* â€œDispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Propertiesâ€ Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
S K Swain*, G Prustry, Ashis S Ray and L Behera â€œDispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization techniqueâ€ Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
A Sarangi, G Nath*, S K Swain* and R Paikray â€œChemical modification of natural fibers with acetone blended alcoholâ€ Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: â€Ž0.42).
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
G Prusty, R Das and S K Swain* â€œInfluence of functionalized single-walled carbon nanotubes on morphology, conducting and oxygen barrier properties of poly (acrylonitrile-co-starch)â€ Composites Part B: Engineering (Elsevier), 62, 236-241 (2014). DOI: 10.1016/j.compositesb.2014.03.006 (Impact Factor: 6.864)
G C Pradhan, S Dash and S K Swain* â€œEffect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starchâ€ Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
A K Pradhan, G Prusty and S K Swain* â€œCharacterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubesâ€, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
S K Swain*, S K Kisku and G Sahoo â€œPreparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain* â€œEffect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starchâ€Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidoneFibers and Polymersâ€ Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
S K Swain*, S Dash, S K Kisku, R K Singh â€œThermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowderâ€ Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
S K Swain*, S Patra and S K Kisku, â€œStudy of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocompositesâ€ Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
S K Kisku, S Dash and S K Swain* â€œDispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Propertiesâ€ Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
S K Swain*, G Prustry, Ashis S Ray and L Behera â€œDispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization techniqueâ€ Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
A Sarangi, G Nath*, S K Swain* and R Paikray â€œChemical modification of natural fibers with acetone blended alcoholâ€ Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: â€Ž0.42).
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
Sahu, M., Samal, R., Biswal, T., & Sahoo, P. K*. (2014). Synthesis and characterization of poly (vinyl acetate)/MMT nanocomposite flame retardant. International Journal of Material Science, 4, 91-98.
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
Swain, P. T. R., & Biswas, S., â€œSelection of materials using multi criteria decision making method by considering physical and mechanical properties of jute/Al2O3 compositesâ€, Applied Mechanics and Materials, vol. 592, pp. 729-733, 2014, doi: https://doi.org/10.4028/www.scientific.net/AMM.592-594.729
Swain, P. T. R., & Biswas, S., â€œPhysical and mechanical behavior of Al2O3 filled jute fiber reinforced epoxy compositesâ€, International Journal of Current Engineering and Technology, vol. 2, pp. 67-71, 2014, doi: http://dx.doi.org/10.14741/ijcet/spl.2.2014.13.
Padhi, P. K. â€œEnglish Competency: The need of the hour for Engineering studentsâ€ in International Journal of English Language, Literature and Humanities (IJELLH), Volume â€“ II, Issue VIII, December 2014, ISSN: 2321-7065, Page no -207.
Padhi, P. K. â€œThe Emergence of Black Literature and the Tragic Portrayal Black Women in the Slave Narrativesâ€ in IOSR Journal of Humanities and Social Science, Volume 19, Issue 11, Ver. IV, Nov. 2014, p-ISSN: 2279- 0845, e-ISSN: 2279- 0837, Page no. 23-28.
Padhi, P. K. â€œThematic Concerns in Zora Neale Hurstonâ€™s Their Eyes Were Watching Godâ€ in IOSR Journal of Humanities and Social Science, Volume 19, Issue 9, Ver. V, Sep. 2014, p-ISSN: 2279- 0845, e-ISSN: 2279- 0837, Page no- 48-52.
Padhi, P. K. â€œThe Rise of Feminism and the Growth of Black American Womenâ€ in IOSR Journal of Humanities and Social Science, Vol-19, Issue-7, Version- IV, July 2014, p-ISSN: 2279- 0845, e-ISSN: 2279- 0837, Page 38-42.
Padhi, P. K. â€œBlack Woman: The Dehumanized and Objectified Self in Alice Walkerâ€™s The Color Purpleâ€ in Researchers World, an International refereed research journal, Vol- V, Issue- 3(I), July 2014, p-ISSN: 2231-4172, e-ISSN: 2229- 4686, Page no- 41.
Padhi, P. K. â€œSoft Skills: Education beyond Academicsâ€ in IOSR Journal of Humanities and Social Science, Vol-19,Issue-5, Version- VI, May 2014, p-ISSN: 2279-0845,e-ISSN: 2279- 0837, Page no- 01.
Padhi, P. K. â€œToni Morrisonâ€™s Projection of Black Womanhood through Pecola and Sethe in The Bluest Eye and Belovedâ€ in Researchers World, an International refereed research journal, Vol- V, Issue- 2, April 2014, p-ISSN: 2231- 4172, e-ISSN: 2229- 4686, Page No-143.
Fluorescence properties, aluminum ion selective emission changes and self-assemblies of positional isomers of 4-(hydroxyphenylthio) naphthalene-1,2-diones. B. R. Jali, J. B. Baruah, Dyes and Pigments, (2014), 110, 56-66.
Substrate selective protein binding of isomers of aromatic carboxylic acid or pyridine tethered-naphthoquinone and their cytotoxicity. B. R. Jali, Y.Kuang, N. Neamati, J. B. Baruah, Chemico-Biological Interactions, (2014), 214, 10-17.
S Panda, D Mishra, BB Biswal, M Tripathy Revolute manipulator workspace optimization using a modified bacteria foraging algorithm: A comparative study Engineering Optimization 46 (2), 181-199
A. K. Barik, S. Dash, P. Patro and S. Mohapatra, Experimental and numerical investigation of air entrainment into a louvered funnel, Applied Ocean Research, 48 (2014), 176-185.
P. Patro, B. Patro and S. Murugan, Prediction of Two-Phase Heat Transfer and Pressure Drop in Dilute Gas-Solid Flows: A Numerical Investigation, Drying Technology, 32 (10) (2014), 1167-1178.
P. Patro and S. Dash, Two-fluid modeling of particulate two-phase flows in vertical pipes, Powder Technology, 264 (2014), 320–331.
P. Patro and S. Dash, Prediction of acceleration length in turbulent gas-solid flows, Advanced Powder Technology, 25 (2014), 1643-1652.
P. Patro and S. Dash, Computations of particle-laden turbulent jet flows based on Eulerian model, ASME Journal of Fluids Engineering, 136 (2014), 011301 1-16.
P. Patro and S. Dash, Numerical simulation for Hydrodynamic analysis and pressure drop prediction in horizontal gas-solid flows, Particulate Science and Technology, 32 (1) (2014), 94-103.
K. P. Shadangi and K. Mohanty, Effect of Co-pyrolysis of Mahua Seed and Waste Polystyrene on Quality of Liquid Fuel. Journal of Renewable and Sustainable Energy 6 (2014) 053142-13.
M. Koul, K. P. Shadangi and K. Mohanty, Thermo-chemical conversion of Kusum seed: A possible route to produce alternate fuel and chemicals. Journal of Analytical and Applied Pyrolysis 110 (2014) 291â€“296.
K. P. Shadangi and K. Mohanty, Production and characterization of pyrolytic oil by catalytic pyrolysis of Niger seed. Fuel 126 (2014) 109-115.
K. P. Shadangi and K. Mohanty, Comparison of yield and fuel properties of thermal and catalytic Mahua seed pyrolytic oil. Fuel 117 (2014) 372â€“380.
K. P. Shadangi and K. Mohanty, Thermal and catalytic pyrolysis of Karanja seed to produce liquid fuel. Fuel 115 (2014) 434-442.
K. P. Shadangi and K. Mohanty, Kinetic Study and Thermal Analysis of the Pyrolysis of Non-edible Oilseed Powders by Thermogravimetric and Differential Scanning Calorimetric Analysis. Renewable Energy 63 (2014) 337-344.
M. Patnaik, K.C. Patra, K.K. Khatua & L. Mohanty (2014) Modelling boundary shear stress in highly sinuous meandering channels, ISH Journal of Hydraulic Engineering, 20:2, 161-168, DOI: 10.1080/09715010.2013.860733
L. Mohanty, K.C. Patra, K.K. Khatua & M. Patnaik (2014) Modelling the depth-averaged velocity in trapezoidal meandering channels, ISH Journal of Hydraulic Engineering, 20:1, 111-118, DOI: 10.1080/09715010.2013.857472
Agrawal, Sanjay; Panda, Rutuparna; Dora, Lingraj; , A study on fuzzy clustering for magnetic resonance brain image segmentation using soft computing approaches, Applied Soft Computing, Volume 24.0, Pages 522-533, Elsevier
Panigrahi, S. K., Deb, A. and Bhattacharyya S. K. (2014), “Shear Behavior Study in FRP Enhanced RCC Beams, Proc: Recent Advances in Civil Engineering, VSSUT, Burla, pp. 163-175, 25th – 26th October.
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.822)
G Prusty, R Das and S K Swain* â€œInfluence of functionalized single-walled carbon nanotubes on morphology, conducting and oxygen barrier properties of poly (acrylonitrile-co-starch)â€ Composites Part B: Engineering (Elsevier), 62, 236-241 (2014). DOI: 10.1016/j.compositesb.2014.03.006 (Impact Factor: 6.864)
G C Pradhan, S Dash and S K Swain* â€œEffect of boron nitride nanopowder on thermal, chemical and gas barrier properties of starchâ€ Chinese Journal of Polymer Science (Springer), 32(10), 1311-1318 (2014). DOI: 10.1007/s10118-014-1511-0 (Impact Factor: 2.016)
A K Pradhan, G Prusty and S K Swain* â€œCharacterization of polyacrylonitrile nanocomposite by reinforcement of functionalized single walled carbon nanotubesâ€, Polymer-Plastics Technology and Engineering (Tylor & Francis), 53(8), 784-789 (2014). DOI: 10.1080/03602559.2014.886042 (Impact Factor: 1.655)
S K Swain*, S K Kisku and G Sahoo â€œPreparation of thermal resistant gas barrier chitosan nanobiocomposites", Polymer Composites (Wiley), 35(12) 2324-2328 (2014). DOI 10.1002/pc.22897. (Impact Factor: 2.262)
G C Pradhan, S Dash and S K Swain* â€œEffect of zirconium oxide nanopowder on the thermal, Chemical and gas barrier properties of starchâ€ Materials Science in Semiconductor Processing (Elsevier), 23, 115-121 (2014). DOI: 10.1016/j.mssp.2014.02.038 (Impact Factor: 2.593)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffect of chemically modified date palm leaf fiber on mechanical, thermal and rheological properties of polyvinylpyrrolidone Fibers and Polymersâ€ Fibers and Polymers (Springer), 15(5), 1062-1070 (2014). DOI 10.1007/s12221-014-1062-6 (Impact Factor: 1.353)
A. Sarangi, G Nath* and S K Swain* â€œCompatibility study of binary mixtures for surface modification of natural fibers using ultrasonic technique at different frequenciesâ€ Indian Journal of Pure and Applied Physics (NISCAIR), 52, 30-34 (2014). DOI: http://nopr.niscair.res.in/handle/123456789/25144 (Impact Factor: 0.582)
S K Swain*, S Dash, S K Kisku, R K Singh â€œThermal and oxygen barrier properties of chitosan bionanocomposites by reinforcement of calcium carbonate nanopowderâ€ Journal of Materials Science & Technology (Elsevier), 30(8), 791-795 (2014). DOI: 10.1016/j.jmst.2013.12.017 (Impact Factor: 5.040)
S K Swain*, S Patra and S K Kisku, â€œStudy of thermal, oxygen-barrier, fire-retardant and biodegradable properties of starch bionanocompositesâ€ Polymer Composites (Wiley), 35, 1238-1243 (2014). DOI 10.1002/pc.22773 (Impact Factor: 2.262)
S K Kisku, S Dash and S K Swain* â€œDispersion of SiC Nanoparticles in Cellulose for Study of Tensile, Thermal and Oxygen Barrier Propertiesâ€ Carbohydrate Polymers (Elsevier), 99, 306-310 (2014). DOI: 10.1016/j.carbpol.2013.08.035 (Impact Factor: 6.044)
S K Swain*, G Prustry, Ashis S Ray and L Behera â€œDispersion of nanoplatelates of grahite on PMMA matrix by in situ polymerization techniqueâ€ Journal of Experimental Nanoscience (Tylor & Francis), 9(03), 240-248 (2014). DOI: 10.1080/17458080.2012.654475 (Impact Factor: 1.362)
A Sarangi, G Nath*, S K Swain* and R Paikray â€œChemical modification of natural fibers with acetone blended alcoholâ€ Advanced Science Letter (American Scientific Publishers) 20(3-4), 570-573 (2014). DOI: 10.1166/asl.2014.5367 (Impact Factor: â€Ž0.42).
S K Kisku, N. Sarkar and S K Swain*, â€œpreparation of starch/PVA/CaCO3 nanobiocomposites film: Study of fire retardant, thermal resistant, gas barrer and biodegradable propertiesâ€ Polymer-Plastic Engineering and Technology, (Taylor & Francis) 53(16), 1664-1670 (2014). DOI:10.1080/03602559.2014.919650 (Impact Factor: 1.655)
S K Swain, S K Kisku and S K Patra â€œImproving starch-based materials for packagingâ€ SPE, Plastics Research Online, (2014) DOI: 10.2417/spepro.005285
B.D. Rout, P. Purnimasi, B. B. Pati, L. N.Tripathy ,“Wavelet Based Spectral Energy Differential Approach For Transmission Line Protection” ,RAIEE, 6th-7th April, EE Department , VSSUT, Burla
Punyapriya Mishra & Tanushree Bera. “Fabrication and characterization of composite using carbon black-waste from petroleum products.” International Journal of Advanced Research (IJAR), Volume 2, Issue 7, 122-130
Punyapriya Mishra, “Mechanical behavior of bagasse fiber reinforced epoxy composites at liquid nitrogen temperature”. Journal of Solid waste Technology and Management, Vol. 40, No.3, Page No.197-202
Bikramaditya Das, B. Subudhi, B. B. Pati,(2014) “Adaptive sliding mode formation control of multiple underwater robots” Archives of Control Sciences,vol.24(LX), no. 4, pp. 515–543, Dec.2014.
Rabindra Behera, B.B. Pati and B.P.Panigrahi,(2014) “A Long Term Load Forecasting of anIndian Grid for Power System Planning” J. Inst. Eng. India Ser. B, 95:279-285 DOI 10.1007/s40031-014-0115-y, Springer, Vol.4, 2014 pp.279-285.
L. D. Samanta, B.P. Panigrahi and B.B. Pati,,(2014) “A New Approach to Direct Torque Control of Induction Motor Drive with GA Controller for Torque Ripple Reduction” Int. Jour of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering, Vol.2, Issue-1, JAN.2014, pp.606-615
S. N. Sahoo, J.P. Panda and G. C. Dash , “The MHD mixed convection stagnation point flowand heat transfer in a porous medium”, Proc. Natl. Acad. Sci., India, Sect. A Phys. Sci., vol. 83(4), pp. 371-381, Oct. 2013, doi: 10.1007/s40010-013-0100-x, Available: https://doi.org/10.1007/s40010-013-0100-x
Punyapriya Mishra, “Statistical analysis for the abrasive wear behavior of bagasse fiber reinforced polymer composite”. International Journal of Applied research in Mechanical Engineering (IJARME) Vol. 2, Issue 3, P. 154-158
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
G. R. Biswal, R. P. Maheshwari, and M. L. Dewal, “System Reliability and Fault Tree Analysis of Hydrogen Cooling Systems,” IEEE Industrial Electronics Magazine, Vol. 7, No. 1, pp. 30 - 40, Mar. 2013. (IF: 8.36)
Recognition of bromide ion by protonated form of 2-(1H-imidazol-2- ylthio)-3-methylnaphthalene-1,4-dione. B.R.Jali, J.B.Baruah, Chempluschem, (2013), 78, 589-597.
Selectivity in changes of fluorescence emission of 1,4-naphthoquinone derivatives by manganese and cadmium ions. B. R. Jali, K. Masud, J.B. Baruah, Polyhedron (2013), 51, 75-81.
2,4-Diamino-6-phenyl-1,3,5-triazine a systematic cocrystal former with dicarboxylic acids. B. R. Jali, J. B. Baruah, Journal of Chemical Crystallography (2013), 43, 531-537.
S. Jena and P. Patro, Computational Investigation of Suction in Taylor-Couette Pump, International Journal of Current Engineering and Technologies, 3(1) (2013) 21-24.
S. Jena, P. Patro and S. S. Behera, Multi-Objective Optimization of Design Parameters of a Shell &Tube type Heat Exchanger using Genetic Algorithm, International Journal of Current Engineering and Technologies, 3(4) (2013), 1379-1386.
P. Patro, B. Patro, Kinetic theory based CFD modeling of particulate flows in horizontal pipes, International Journal of Mathematical Sciences, 7(3) 2013, 451-457.
Bhalla, S., Panigrahi, R. and Gupta, A. (2013), “Damage Assessment of Tensegrity Structures using Piezo-Transducers”, Meccanica, Vol 48.Issue 6, 1465-1478, bimonthly.
K. P. Shadangi and K. Mohanty, Characterization of non-conventional oil containing seeds towards the production of bio-fuel. J. Renewable Sustainable Energy 5 (2013) 033111-13.
Panda, S. , Mishra, A. , & Munjal, D. (2013). Aspect mining using UML communication diagram'. International Journal of Computer Science and Informatics (IJCSI), 3(2), 52-57.
Mishra, A., Panda, S., & Munjal, D. (2013). Dynamic Slicing of Aspect-Oriented UML Communication Diagram. International Journal of Computer Science and Informatics, 3(2), 58-63.
Dora, Lingraj; Agrawal, Sanjay; Panda, Rutuparna; , BFO-RLDA: A New Classification Scheme for Face Images Using Probabilistic Reasoning Model, International Conference on Swarm, Evolutionary, and Memetic Computing, Pages 88-97, Springer International Publishing Cham
Agrawal, Sanjay; Swain, S; Dora, Lingraj; , BFO-ICA based multi focus image fusion, 2013 IEEE Symposium on Swarm Intelligence (SIS), Pages 194-199, IEEE
Panda, Rutuparna; Agrawal, Sanjay; Bhuyan, Sudipta; , Edge magnitude based multilevel thresholding using Cuckoo search technique, Expert Systems with Applications, Volume 40.0, Number 18, Pages 7617-7628, Elsevier
Agrawal, Sanjay; Panda, Rutuparna; Bhuyan, Sudipta; Panigrahi, Bijaya K; , Tsallis entropy based optimal multilevel thresholding using cuckoo search algorithm, Swarm and Evolutionary Computation, Volume 11.0, Pages 16-30, Elsevier
K. K. Sahu, S. PANIGRAHI, and H. S. Behera, â€œA novel chemical reaction optimization algorithm for higher order neural network training.,â€ Journal of Theoretical & Applied Information Technology, vol. 53, no. 3, 2013
N Sarkar, G Sahoo, S K Kisku, G Prusty and S K Swain â€œEffect of Carbon Nanotubes on Electrical Properties of Polymer Nanocomposites: A Reviewâ€ Int. J Adv. Chem Sci Appl., 1, 42-50 (2013). ISSN # 2347-7601. (Impact Factor: NA)
G Nath, S K Swain, A Sarangi and R Paikray â€œSonochemical analysis of solvent mixtures used for surface treatment of natural fibersâ€ J Pure Appl Ultrasonic 35 (4), 133-136 (2013). ISSN # 0256-4637. (Impact Factor: NA)
G Prusty and S K Swain* â€œDispersion of ZrO2 nanoparticles in polyacrylonitrile: Preparation of thermally-resistant electrically-conductive oxygen barrier nanocompositesâ€ Materials Science in Semiconductor Processing (Elsevier), 16, 2039-2043 (2013). DOI: 10.1016/j.mssp.2013.07.033 (Impact Factor: 2.593)
S K Swain*, B. Shur and S K Patra â€œPoly(acrylamide-co-vinyl alcohol)â€“Superabsorbent Materials Reinforced by Modified Clayâ€ Polymer Composites (Wiley), 34, 1794-1800 (2013). DOI 10.1002/pc.22583 (Impact Factor: 2.262)
S Dash and S K Swain* â€œSynthesis of Thermal and Chemical Resistant Oxygen Barrier Starch with Reinforcement of Nano Silicon Carbideâ€ Carbohydrate Polymers (Elsevier), 97, 758-763 (2013). DOI: 10.1016/j.carbpol.2013.05.061 (Impact Factor: 6.044)
S Dash and S K Swain* â€œEffect of nano boron nitride on the physical and chemical properties of soy proteinâ€ Composites Science and Technology (Elsevier), 84, 39-43 (2013). DOI: 10.1016/j.compscitech.2013.05.004 (Impact Factor: 5.160)
S K Swain*, S Dash, C Behera, S K Kisku and L Behera â€œEffect of nano BN on the thermal properties of Celluloseâ€ Carbohydrate Polymers (Elsevier), 95, 728-732 (2013). DOI: 10.1016/j.carbpol.2013.02.080 (Impact Factor: 6.044)
A K Pradhan and S K Swain* â€œSynthesis and characterization of poly(acrylonitrile-co-methylmethacrylate) nanocomposites reinforced by functionalized multiwall carbon nanotubesâ€ Iranian Polymer Journal (Springer), 22(5) 369-376 (2013). DOI: 10.1007/s13726-013-0136-4 (Impact Factor: 1.278)
S K Swain*, A K Pradhan and H S Sahu â€œSynthesis of gas barrier starch by dispersion of functionalized multiwalled carbon nanotubeâ€ Carbohydrate polymers (Elsevier), 94(1) 663-668 (2013). DOI: 10.1016/j.carbpol.2013.01.056 (Impact Factor: 6.044)
G Prusty and S K. Swain* â€œDispersion of Multi walled carbon nanotubes in Polyacrylonitrile-co-Starch copolymer matrix for enhancement of Electrical, Thermal and Gas Barrier Propertiesâ€ Polymer Composites (Wiley), 34(3), 330-334 (2013). DOI: 10.1002/pc.22418 (Impact Factor: 2.262)
S K Swain*, G Prusty and I Jena â€œConductive gas barrier and thermal resistant behavior of polymethylmethacrylate composites by dispersion of ZrO2 nanoparticlesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis), 62, 733-736 (2013). DOI: 10.1080/00914037.2013.769234 (Impact Factor: 2.263)
S K Kisku and S K Swain* â€œEffect of SiC nanoparticles on thermal and oxygen barrier of abumin brovine proteinâ€ Polymer-Plastic Engineering and Technology (Taylor & Francis), 52, 940-945 (2013). DOI: 10.1080/03602559.2013.763375 (Impact Factor: 1.655)
J R Mohanty, S N Das, H C Das and S K Swain* â€œEffective mechanical properties of PVA/DPL biocompositesâ€ Polymer Composites (Wiley), 34, 959-966 (2013). DOI: 10.1002/pc.22502 (Impact Factor: 2.262).
Punyapriya Mishra, “Statistical analysis for the abrasive wear behavior of bagasse fiber reinforced polymer composite”. International Journal of Applied research in Mechanical Engineering (IJARME) Vol. 2, Issue 3, P. 154-158
Monalisa.Biswal, B.B. Pati, ,(2013) “Directional relaying for double circuit line with series compensation”, IET Proc. Generation Trans & Distr., Vol. 7, Issue 4,pp. 405-413 , 2013.
Monalisa. Biswal, B. B. Pati, and A. K. Pradhan,(2013) “Adaptive distance relay setting for series compensated line,” Int. Journal of Electrical Power and Energy system, Elsevier Science, vol. 52, pp. 198-206, 2013.
Monalisa Biswal, and B. B. Pati, (2013) “Distance relay algorithm for thyristor controlled series compensated line”, International Journal of Computer Science System Engineering and Information Technology, vol. 6, no.1, pp. 43-48, Jan-June 2013.
L. D. Samanta, B.B. Pati, B.P. Panigrahi, (2013) “Direct Flux and Torque Control of Induction Motor Drive Changing the Hysteresis Band Amplitude” Int. Jour of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering, Vol.1, Issue-11, Dec.2013, pp.421-424.
A.Chatterjee, Loknath Dhall Samanta, and B.B. Pati,(2013) “Direct Torque Control of Induction Motor using Fuzzy Logic Controller for Low Torque Ripple” Asian Resonance, Vol-II, Issue-IV, Oct.2013, pp.7-12.
J.P. Panda, N. Dash and G. C. Dash, “Heat and mass transfer on MFD flow through porous media over an accelerating surface in presence of suction and blowing”, Journal of Engineering Thermophysics, vol. 21(2), pp. 119-130, 2012, doi: 10.1134/S1810232812020038,
Available: https://doi.org/10.1134/S1810232812020038
Gujjala Raghavendra, S.K.Acharya. C.R.Deo, P.Mishra “Fabrication-modelling and analysis on tribological performance of natural composites using taguchi approach.” Procedia Engineering, Volume 38, p.2635-2644
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
Padhi, P. K. â€œThe Influence of Slave Narratives on the Black Women Writersâ€ in Thematics, A peer reviewed international research journal of English studies, Vol â€“ 3, Issue-1, Jan 2012, ISSN: 0975-8313.
Padhi, P. K. â€œThe Influence of Slave Narratives on the Black Women Writersâ€ in Thematics, A peer reviewed international research journal of English studies, Vol â€“ 3, Issue-1, Jan 2012, ISSN: 0975-8313.
Padhi, P. K. â€œThe Influence of Slave Narratives on the Black Women Writersâ€ in Thematics, A peer reviewed international research journal of English studies, Vol â€“ 3, Issue-1, Jan 2012, ISSN: 0975-8313.
Padhi, P. K. â€œThe Influence of Slave Narratives on the Black Women Writersâ€ in Thematics, A peer reviewed international research journal of English studies, Vol â€“ 3, Issue-1, Jan 2012, ISSN: 0975-8313.
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
Biswal, T., Samal, R., & Sahoo, P. K*. (2012). Microwave?assisted preparation of poly (2?EHA?co?ST) copolymer and poly (2?EHA?co?ST)/MMT nanocomposite. Journal of applied polymer science, 125(2), 1467-1475. (Scopus, SCI, IF: 3.057)
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
Gyan Ranjan Biswal, R. P. Maheshwari, and M. L. Dewal, “Dynamic Process Control and Monitoring of Novel S3RS based Hydrogen Cooling System,” Int. J. Electrical Power and Energy Systems, Elsevier, Vol. 43, No. 1, pp. 162-172, Dec. 2012. (IF: 5.659)
Gyan Ranjan Biswal, R. P. Maheshwari, and M. L. Dewal, “System Reliability and Fault Tree Analysis of SeSHRS based Augmentation of Hydrogen: Dedicated for Combined Cycle Power Plants,” IEEE Systems Journal, Vol. 6, No. 4, pp. 647-656, Dec. 2012. (IF: 4.802)
G. R. Biswal, R. P. Maheshwari, and M. L. Dewal, “Modeling, Control and Monitoring of S3RS based Hydrogen Cooling System in Thermal Power Plant,” IEEE Transactions on Industrial Electronics, Vol. 59, No. 1, pp. 562-570, Jan. 2012. (IF: 8.162)
Padhi, P. K. â€œThe Influence of Slave Narratives on the Black Women Writersâ€ in Thematics, A peer reviewed international research journal of English studies, Vol â€“ 3, Issue-1, Jan 2012, ISSN: 0975-8313.
Polymorphs and solvates of 2-(1,4-dihydro-1,4-dioxonaphthalen-3-ylthio)benzoic acid. B. R. Jali, J. B. Baruah, Crystal Growth and Design (2012), 12, 3114-3122.
Iron(II) and manganese(II) complexes of 2-{2-(3-carboxypyridin-2-yl)disulfanyl} pyridine-3-carboxylic acid through C-S bond cleavage. W.M. Singh, B. R. Jali, J. B. Baruah, Journal of Chemical Crystallography (2012), 42, 775-782.
S Panda, D Mishra, BB Biswal, BB ChoudhuryRobot workspace optimization using a novel modified differential evolutionary technique International Journal of Computational Methods 9 (03), 1250034
S Panda, D Mishra, BB Biswal Revolute manipulator workspace optimization: A comparative study Applied Soft Computing 13 (2), 899-910
B. Patro, S. Murugan and P. Patro, Numerical modeling of gas-solid flow in a horizontal pipe, Multiphase Science and Technology, 24(4) (2012), 299-322.
P. Patro, S. Jena and B. Patro, Numerical Modeling of Dilute Particulate Flows in Horizontal and Vertical Pipes, International Journal of Current Engineering and Technologies, 2(3) (2012) 300-304.
P. Patro, B. Patro and A. Barik, CFD simulation of a Conjugate Heat Transfer Problem in a Rectangular Cavity , International Journal of Thermal Technologies, 2(2) (2012) 148-152.
K. P. Shadangi and R. K. Singh, Thermolysis of polanga seed cake to bio-oil using semi batch reactor. Fuel 97 (2012) 450-456.
Numerical solution for the flow and heat transfer of a third grade fluid past a porous vertical plate (I nayak A.K.Nayak S Padhy) J- Adv. Studies theo.Phy. Vol.6(no13), pg-615-624, ISSN No-1313-1311(2012)
Unsteady MHD flow analysis of a third-grade fluid between two porous plates (I Nayak & S Padhy) j- Journal of Orissa Mathematical Society, Vol.31(1), pg-83-96, ISSN No.0975-2323(2012)
Unsteady MHD flow analysis of a third-grade fluid between two porous plates (I Nayak & S Padhy) j- Journal of Orissa Mathematical Society, Vol.31(1), pg-83-96, ISSN No.0975-2323(2012)
Agrawal, Sanjay; Panda, Rutuparna; , An efficient algorithm for gray level image enhancement using cuckoo search, Swarm, Evolutionary, and Memetic Computing: Third International Conference, SEMCCO 2012, Bhubaneswar, India, December 20-22, 2012. Proceedings 3, Pages 82-89, Springer Berlin Heidelberg
Panigrahi, S. K., Deb, A. and Bhattacharyya, S. K. (2012), “Numerical study of shear failure in FRP enhanced RCC beams”, Proc: Advances in Mechanics and Materials, VSSUT, Burla, pp. 73-83.
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 1.264)
S Dash, S K Kisku and S K Swain* â€œEffect of nano clay on morphological, thermal and barrier properties of albumin brovineâ€ Polymer Composites (Wiley), 33, 2201-2206 (2012). DOI: 10.1002/pc.22363 (Impact Factor: 2.262)
S K Swain*, S K Patra and P Priyadarshini, â€œSoy protein/clay nanobiocomposites for ideal packaging materialsâ€ Polymer-Plastic Technology and Engineering (Taylor & Francis), 51, 1282-1287 (2012). DOI: 10.1080/03602559.2012.700542 (Impact Factor: 1.655)
G Prusty and S K Swain* â€œDispersion of expanded graphite as nanoplatelates in a copolymer matrix and its effect on thermal stability, electrical conductivity and permeabilityâ€ New Carbon Mater (Elsevier), 27(4) 271-277 (2012). DOI: 10.1016/S1872-5805(12)60017-1 (Impact Factor: 1.171) (Awarded as excellent paper of the year 2012)
A K Pradhan and S K Swain* â€œElectrical conductivity and oxygen permeability of polyacrylonitrile/multiwalled carbon nanotubes compositesâ€ Polymer Composites (Wiley), 33(7), 1114-1119 (2012). DOI: 10.1002/pc.22239 (Impact Factor: 2.262)
A K Pradhan and S K Swain* â€œOxygen barrier multiwalled carbon nanotube/polymethyl methacrylate nanocomposites prepared by in situ methodâ€ Journal of Materials Science and Technology (Elsevier), 28(5), 391-395 (2012). DOI: 10.1016/S1005-0302(12)60073-5 (Impact Factor: 5.040)
S K Patra and S K Swain* â€œEffect of organoclays on the thermal, mechanical, and oxygen barrier properties of poly(methyl methacrylate-co-acrylonitrile)/clay nanocompositesâ€ Polymer Composites (Wiley), 35(5), 796-802 (2012). DOI: 10.1002/pc.22209 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œStudy of oxygen permeability and flame retardancy properties of biodegradable polymethylmethacrylate/starch compositesâ€ Polymer Composite (Wiley), 33, 79-84, (2012). DOI: 10.1002/pc.21240 (Impact Factor: 2.262)
S K Kisku and S K Swain* â€œSynthesis and characterization of chitosan/boron nitride compositesâ€ Journal of the American Ceramic Society (Wiley), 95(9), 2753-2757 (2012). DOI: 10.1111/j.1551-2916.2012.05140.x (Impact Factor: 2.956)
S K Swain*, G Prusty and R Das â€œSonochemical compatibility of PVA-PA blend in aqueous solutionâ€ Journal of Macromolecular Science, Part B: Physics (Taylor & Francis), 51(3), 580-589 (2012). DOI: 10.1080/00222348.2011.609782 (Impact Factor: 1.005)
S K Patra, G Prusty and S K Swain* â€œUltrasound assisted synthesis of PMMA/clay nanocomposites: Study of oxygen permeation and flame retardant propertiesâ€ Bulletin of Materials Science (Springer), 35(1), 27-32 (2012). DOI: 10.1007/s12034-011-0259-1 (Impact Factor: 0.925)
S K Kisku and S K Swain* â€œPolymethyl methacrylate/soy protein green composites as gas barrier materialsâ€ Chinese Journal of Polymer Science (Springer), 30(3) 397-404 (2012). DOI: 10.1007/s10118-012-1148-9 (Impact Factor: 2.016)
S. Sahu, B. B. Pati and B. D. Rout ,“Support Vector Machine based Fault Classification and Location in Power” RAMPS, EE Department, VSSUT,Burla
Gujjala Raghavendra, S.K.Acharya. C.R.Deo, P.Mishra “Fabrication-modelling and analysis on tribological performance of natural composites using taguchi approach.” Procedia Engineering, Volume 38, p.2635-2644
Bikramaditya Das, Ch. S. Das, S.Das, B.Subudhi, B.B. Pati,(2012) “Narrowband Interference Reduction Technique in Impulse Radio (IR) UWB Communication System Coexisting in WPAN and Underwater Environment.”, ICTACT Int. Journal, on Communication Technology, ISSN0976-0091, Vol.3, No.1, Mar 2012 pp.478-487.
B.B. Pati, Rabindra Behera, and D.P. Patra, (2012) “Power Quality Improvement for Grid Connected Wind Energy System using STATCOM Control Scheme”, Electrical India, April 2012, pp.24-29.
Rabindra Behera, B.P. Panigrahi, and B.B. Pati, (2012) “Economic Load Dispatch problem using modified Genetic Algorithm”, Int. Jour of Scientific and Engineering Research, Vol.3 Issue.5 May 2012, pp.1-6.
Rabindra Behera, B.B. Pati, B.P. Panigrahi, andS.Misra (2012) “An application of Genetic Programming for Power System Planning and Operation”, ACEEE Int. Jour on Control System and instrumentation, Vol.3, Issue.2 pp.15-20, 2012.
Mamun Mishra, B.K. Panigrahi, & B.B. Pati, (2012) “Improvement in Voltage Stability by Optimal Placement of Distributed Generation”, Electrical India, November 2012, pp.40-48.
Monalisha.Biswal, B.B. Pati, and A.K. Pradhan (2012) “Directional relaying of series compensated line using integrated approach”, Electric Power Components and Systems, Vol.40, , pp.691-710, 2012.
J.P. Panda, N. Dash and G. C. Dash, “Three dimensional MHD free convective flow with heat and mass transfer through a porous medium with periodic permeability”, AMSE J. Modelling, Measurement and Control, B, vol. 80, no.1, pp. 01-17, 2011.
J.P. Panda, N. Dash and G. C. Dash, “Hydro magnetic flow and heat-transfer through porous medium of elastic-viscous fluid over a porous plate in slip flow regime”, AMSE J. Modelling, Measurement and Control, B, vol. 80, no.2, pp. 71-87, 2011.
S. N. Sahoo, J.P. Panda and G. C. Dash, “Unsteady two dimensional MHD flow and heat transfer of an elastic-viscous liquid past an infinite hot vertical porous surface bounded by porous medium with source/sink”, AMSE J. Modelling, Measurement and Control, B, vol. 80, no.2 , pp. 26-42, 2011.
Punyapriya Mishra and S.K.Acharya. “Study on dielectric properties of bagasse fiber reinforced epoxy composite.” Journal of Inventi. Volume 2, No.1
Samir Kumar Acharya, Punyapriya Mishra and Suraj Kumar Mehar. “Effect of surface treatment on the mechanical properties of bagasse fiber reinforced polymer composite.” Journal of Bioresources. Volume 6, No. 3, pp. 3155-3165
S K Swain* and G Prusty â€œCharacterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* and G Prusty â€œCharacterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* and G Prusty â€œCharacterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCharacterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCharacterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCharacterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCharacterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCharacterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCharacterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCharacterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCh+aracterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCh+aracterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCh+aracterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCh+aracterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCh+aracterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCh+aracterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCh+aracterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCharacterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCharacterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCharacterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCharacterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCharacterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCharacterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCharacterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCharacterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCharacterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCharacterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCharacterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCharacterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCharacterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCharacterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCharacterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCharacterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCharacterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
Sahoo, P. K*., Biswal, T., & Samal, R. (2011). Microwave-assisted preparation of biodegradable water absorbent polyacrylonitrile/montmorillonite clay nanocomposite. Journal of Nanotechnology, 2011, 10-21. (Scopus, SCI, IF: 4.2)
Polymorphs of aromatic thiolato 1, 2 or 1,4-naphthoquinones. B. R. Jali, W.M. Singh, J. B. Baruah, CrystEngComm (2011), 13, 763-767.
Linear to spiral coordination polymers of 1,4-naphthalene di-(2-oxyacetate) of cobalt, manganese and copper. B. R. Jali, J. B. Baruah, Inorganic Chemistry Communications (2011), 14, 1440-1443.
Synthesis, characterization, and catalytic activity of zinc carboxylate complexes of 2,3-pyridine dicarboxylic acid and (3-oxo-2,3-dihydro-benzo[1,4]oxazin-4-yl)acetic acid. W. M. Singh, B. R. Jali, B. Das, J. B. Baruah, Inorganica Chimica Acta (2011), 372, 37-41.
S Panda, D Mishra, BB Biswal Determination of optimum parameters with multi-performance characteristics in laser drillingâ€”a grey relational analysis approach The International Journal of Advanced Manufacturing Technology 54 (9), 957-967
K. P. Shadangi and R. K. Singh, Liquid fuel from castor seeds by pyrolysis. Fuel 90 (2011) 2538-2544.
Sucheta Panda, P.K.Nanda, â€œConstrained Compound Markov Random Field Model with Graduated Penalty Function for Color Image Segmentation â€,Advanced Materials research Vols. 403-408 (2012) pp 3438-3445 Online available since 2011/Nov/29 at www.scientific.net Â© (2012) Trans Tech Publications, Switzerland doi:10.4028/www.scientific.net/AMR.403-408.3438.
Agrawal, Sanjay; Panda, Rutuparna; Dora, Lingaraj; , An efficient algorithm for multi-focus image fusion using PSO-ICA, International Conference on Swarm, Evolutionary, and Memetic Computing, Pages 159-166, Springer Berlin Heidelberg Berlin, Heidelberg
S K Swain* â€œUltrasound assisted process of PA6/clay nanocomposites: mechanical, rheological and barrier Propertiesâ€ Journal of Polymer Engineering (de Gruyter), 31, 185-189 (2011). DOI: 10.1515/polyeng.2011.040 (Impact Factor: 0.778)
S K Patra, G Prusty and S K Swain* â€œSynthesis of PAN/clay nanocomposites: study of gas permeation propertiesâ€ International Journal of Nanoscience (World Scientific), 10(4), 1101-1105 (2011). DOI: 10.1142/S0219581X11009210 (Impact Factor: â€Ž0.56)
S K Swain* and S. K. Patra â€œUltrasonic and viscometric study of synthesized pan/clay nanocompositesâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 60(12), 1-10 (2011). DOI: 10.1080/00914037.2010.551375 (Impact Factor: 2.263)
G Prusty and S K Swain* â€œSynthesis and Characterization of Conducting Gas Barrier PAN/EG Nanocompositesâ€ Polymer Composites (Wiley), 32(9), 1336-1342 (2011). DOI: 10.1002/pc.21155 (Impact Factor: 2.262)
S K Patra and S K Swain*, â€œSwelling study of superabsorbent PAA-co-PAM/clay nanohydrogelâ€ Journal of Applied Polymer Science (Wiley), 120(3), 1533-1538 (2011). DOI: 10.1002/app.33381 (Impact Factor: 1.919)
S K Swain* and G Prusty â€œCharacterizing Oxygen-Barrier Polyacrylonitrile/Graphite Nanocompositesâ€ SPE, Plastics Research Online, (2011) DOI-10.1002/spepro.003851.
Deepak Kumar Lal, Bibhuti Bhusan Dash, and A. K. Akella, "Optimization of PV/Wind/Micro-Hydro/Diesel Hybrid Power System in HOMER for the Study Area", International Journal on Electrical Engineering and Informatics, Volume 3, Number 3, 2011, pp. 307-325.https://doi: 10.15676/ijeei.2011.3.3.4
Deepak Kumar Lal, and K. S. Swarup, "Modeling and Simulation of Chaotic Phenomena in Electrical Power Systems", Applied Soft Computing Journal (Elsevier Publication), Volume 11, Issue 1, January 2011, pp. 103-110.https://doi: 10.1016/j.asoc.2009.11.001
Punyapriya Mishra and S.K.Acharya. “Study on dielectric properties of bagasse fiber reinforced epoxy composite.” Journal of Inventi. Volume 2, No.1
Samir Kumar Acharya, Punyapriya Mishra and Suraj Kumar Mehar. “Effect of surface treatment on the mechanical properties of bagasse fiber reinforced polymer composite.” Journal of Bioresources. Volume 6, No. 3, pp. 3155-3165
Rabindra Behera, B.B.Pati, B.P. Panigrahi, and D.K. Rout,(2011) “Reliability Evaluation of a Power System including wind Mill”, ELECTRICA INDIA, Vol. 51 (04) April 2011 page 40-48
Shibashis Sahu, & B.B. Pati,(2011) “Reliability Enhancement in Electrical Energy Management System”, Electrical India, Vol.51, No.10, October-2011 pp.96-103.
ShibashisSahu, B.B. Pati and Deba Prasad Patra,(2011) “Fault Classification and location algorithm for series compensated power transmission line”, Int. Jour. Of Electrical Energy systems, Vo.3, No.2, July-Dec.2011, ISSN0975-7147, pp.65-70.
B.B. Pati, and Maheswar Behera,(2011) “Detection of faults in Distribution Transformer and Classification using Wavelet Transform” Indian Journal of Power and River Valley Development, Vol.61, No.7 & 8 July-Aug.2011.
Rabindra Behera, B.B.Pati, B.P.Panigrahi,(2011) , “Economic Power Dispatch Problem using Artificial Immune System, International Journal of Scientific & Engineering Research Volume 2, Issue 5, May-2011 ISSN 2229-5518, pp125-130.
Rabindra Behera, B.P. Panigrahi, & B.B. Pati,(2011) “A Hybrid Short Term Load Forecasting Model of an Indian Grid”, Energy & Power Engineering, Scientific Research May 2011, 3, pp.190-193.
S. N. Sahoo, J.P. Panda and G. C. Dash , “Hydromagnetic oscillatory flow and heat transfer of a viscous liquid past a vertical porous plate in a rotating medium”, Indian J. of Science and Technology, vol. 3, no. 7, pp. 817-821, 2010, doi: 10.17485/ijst/2010/v3i7.15,
Available: https://doi.org/10.17485/ijst/2010/v3i7.15
J.P. Panda, N. Dash and G. C. Dash , “Heat and mass transfer in MHD flow of viscous fluid past a vertical plate under oscillatory suction velocity with heat source”, AMSE J. Modelling, Measurement and Control, B, vol. 79, no. 1-2, pp. 52-65, 2010.
Punyapriya Mishra and S.K.Acharya. “Effect of fiber loading on the abrasive wear behaviour of bagasse fiber reinforced epoxy composite.” Journal of Tribology Research, Volume 1, No. 2, pp. 59-64
Punyapriya Mishra & S.K.Acharya. “Solid particle erosion of bagasse fiber reinforced epoxy composite.” International Journal of Physical Science, Volume 5, No.2, pp. 109-115
Punyapriya Mishra and S.K.Acharya. “Anisotropy abrasive wear behaviour of bagasse fiber reinforced polymer composite.” International Journal of Engineering, Science and Technology, Volume 2, No. 11, pp. 104-112.
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
Biswal, T., Samal, R., & Sahoo, P. K. (2010). Complex-mediated microwave-assisted synthesis of polyacrylonitrile nanoparticles. Nanotechnology, Science and Applications, 3, 77-83.
Biswal, T., Samal, R., & Sahoo, P. K*. (2010). Co (III) complex mediated microwave?assisted synthesis of PAN. Journal of applied polymer science, 117(3), 1837-1842. (Scopus, SCI, IF: 3.057).
S Panda, D Mishra Test-Rigs for Dynamically Loaded Journal Bearing: A Study SAE Technical Paper
S Panda, D Mishra Development of a tribological failure knowledge model International Journal of Knowledge Engineering and Data Mining 1 (2), 99-114
A. Dewan, P. Patro, I Khan, P Mahanta, Effect of Fin Spacing and Material on Performance of Circular Pin Fin Heat Sink, Proc. of IMechE, Part A, Journal of Power and Energy, 224 (2010) 35-46.
Panigrahi, R., Bhalla, S., Gupta, A., Pande, H., and Prakash, A.,2010, “Experimental investigations on low cost foldable tensegrity structures”, International Journal of Emerging Technologies and Applications in Engineering Technology and Sciences, Vol 3, Issue 1, 341-45.
Panigrahi, R., Bhalla, S. and Gupta, A., 2010, “Development and analysis of a prototype dismountable tensegrity structure for shelter purposes”, International Journal of Earth Sciences and Engineering, , Vol 3, Issue 4, 561-78.
Panigrahi, R., Gupta, A. and Bhalla, S., 2010, “A low cost variant of electro-mechanical impedance(EMI) technique for structural health monitoring”, Experimental Techniques, Vol 34, Issue 2, 25-29.
Panda, Rutuparna; Agrawal, Sanjay; , EBFS-ICA: An efficient algorithm for CT-MRI image fusion, Swarm, Evolutionary, and Memetic Computing: First International Conference on Swarm, Evolutionary, and Memetic Computing, SEMCCO 2010, Chennai, India, December 16-18, 2010. Proceedings 1, Pages 351-361, Springer Berlin Heidelberg
A concise enantioselective total synthesis of (+)-epi-muricatacin, using asymmetric hydrogenation/intramolecular iodoetherification as key stepsG. Kumaraswamy, Duggirala Ramakrishna and Kondapalli SanthakumaraTetrahedron: Asymmetry 21 (2010) 544â€“548
S. K. Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: NA)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.158)
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.822).
S K Swain* and P. Priyadasrshini, â€œUltrasonic and viscometric investigation of soya protein in aqueous solutionâ€ Indian Journal of Pure & Applied Physics (NISCAIR), 48(8), 539-542 (2010). DOI: http://nopr.niscair.res.in/handle/123456789/9957 (Impact Factor: 0.582)
A Mohanty and S K Swain* â€œStudy of solution properties of albumin protein by ultrasonic techniqueâ€ Journal of Indian Chemical Society (NISCAIR), 87(4), 461-464 (2010). (Impact Factor: 0.10)
S.K.Swain* and I Jena â€œPolymer/CNT nanocomposites: A novel materialâ€ Asian Journal Chemistry (Oxford), 22(1), 1-15 (2010). (Impact Factor: 0.14)
Punyapriya Mishra and S.K.Acharya. “Effect of fiber loading on the abrasive wear behaviour of bagasse fiber reinforced epoxy composite.” Journal of Tribology Research, Volume 1, No. 2, pp. 59-64
Punyapriya Mishra & S.K.Acharya. “Solid particle erosion of bagasse fiber reinforced epoxy composite.” International Journal of Physical Science, Volume 5, No.2, pp. 109-115
Punyapriya Mishra and S.K.Acharya. “Anisotropy abrasive wear behaviour of bagasse fiber reinforced polymer composite.” International Journal of Engineering, Science and Technology, Volume 2, No. 11, pp. 104-112.
S. S. Das, A. Satapathy, J.K. Das, J.P. Panda, “Mass transfer effects on MHD flow and heat transfer past a vertical porous plate through a porous medium under oscillatory suction and heat source”, International journal of heat and mass transfer,vol. 52, no. 25-26, pp. 5962-5969, 2009, Available: https://doi.org/10.1016/j.ijheatmasstransfer.2009.04.038
S. S. Das, J.P. Panda and, S.R. Biswal, “Magnetohydrodynamic steady free convective flow and mass transfer in a rotating elastic-viscous fluid past an infinite vertical porous flat plate with constant suction”, AMSE J. Modelling, Measurement and Control, B, vol. 78, No. 2 , pp. 01-19, 2009.
S. S. Das and J.P. Panda, “MHD free convection flow of a particulate suspension past an infinite porous inclined flat plate with heat absorption”, AMSE J. Modelling, Measurement and Control, B, vol. 78, No. 3, pp. 20-31, 2009.
S. S. Das, J.P. Panda and A. B. Pattnaik, “Effect of free convection and mass transfer on MHD flow of a rotating elastico-viscous fluid past an infinite vertical porous plate through a porous medium with constant suction and heat flux ,Indian J. of Science and Technology , vol. 2, no. 9, pp. 32-37, 2009,doi:10.17485/ijst/2009/v2i9, Available: https://doi.org/10.17485/ijst/2009/v2i9.2
P.Mishra & Dr. S.K.Acharya, S.K.Mehar. “The influence of fiber treatment on the performance of bagasse fiber reinforced polymer composite.” International Journal of Reinforced plastics and Composites, Volume 28, No. 24, pp.3027-3036.
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
S Panda, D Mishra A multi-objective optimum design of dynamically loaded journal bearing for a prescribed Ï€ extent film SAE Technical Paper
A. Dewan, V. Bharti, V. Mathur, U.K. Saha, P. Patro, A Comparison of Tapered and Straight Circular Pin Fin Compact Heat Exchangers for Electronic Appliances, Journal of Enhanced Heat Transfer, 16(3) (2009) 301-314.
Panigrahi, R., Gupta, A. and Bhalla, S., 2009, “ Dismountable steel tensegrity grids as light-weight roof structures ”, Steel and Composite Structures, Vol 9, Issue No 3, 239-253.
Â Sucheta Panda, P.K.Nanda, “An Unified Markov Random Field Model for Color Texture Image Segmentation”, International Journal of IntelligentÂ Â Information Processing, Vol.3, No.2, pp: 161-176, July-December, 2009.
H S S Ramakrishna Matte, S K Swain, A Thirumurugan and C N R Rao* â€œTwo- and three-dimensional hybrid compounds formed by 1,2-, 1,3- and 1,4-cyclo hexanedicarboxylates of zincâ€ Journal of Inorganic and General Chemistry (ZAAC) ((Wiley), 635(12), 1840-1847 (2009). DOI: 10.1002/zaac.201490002 (Impact Factor: 1.179)
S K Swain and A I Isayev â€œPA6/clay nanocomposites by continuous sonication processâ€ Journal Applied Polymer Science (Wiley), 114(4), 2378-2387 (2009). DOI: 10.1002/app.30827 (Impact Factor: 1.919)
P.Mishra & Dr. S.K.Acharya, S.K.Mehar. “The influence of fiber treatment on the performance of bagasse fiber reinforced polymer composite.” International Journal of Reinforced plastics and Composites, Volume 28, No. 24, pp.3027-3036.
J.P. Panda, M. Panda and G. C. Dash, “Unsteady MHD flow of visco-elastic Maxwell fluid through rectangular porous tube”, AMSE J. Modelling, Measurement and Control, B, vol. 77, no. 1, pp. 54-69, 2008.
J.P. Panda, M. Panda and G. C. Dash, “Unsteady free convection MHD flow and mass transfer of a second order fluid between two heated plates with source/sink”, AMSE J. Modelling, Measurement and Control, B, vol. 77, no. 5, pp. 28-43, 2008.
J.P. Panda, M. Panda and G. C. Dash, “Transient mixed radiative convection MHD flow through porous media ofa Micropolar fluid”, AMSE J. Modelling, Measurement and Control, B, vol. 77, no. 3, pp. 52-66, 2008.
S. S. Das, M. Mitra, J.P. Panda and J. K. Das , “Mass transfer effects of unsteady free convective MHD flow of a rotating elastic-viscous fluid past an infinite vertical porous plate with constant suction and fluctuating temperature”, AMSE J. Modelling, Measurement and Control, B, vol. 77, No. 3, pp. 01-18, 2008.
S. S. Das, M. Mohanty, J.P. Panda and S. K. Sahoo, “Hydromagnetic three dimensional Couette flow and heat transfer”, Journal of Naval Architecture and Marine Engineering,vol. 5, no. 1, pp. 01-10, 2008.
Dr. S.K.Acharya, P.Mishra, Dr.S.C.Mishra “Effect of environment on the mechanical properties of fly ash – jute – polymer Composite.” Indian Journal of Engineering and Material Science, Volume 15, No. 6, pp. 483-488.
P.Mishra & Dr. S.K.Acharya, S.K.Meher, V.Dikshit “Weathering behavior of bagasse fiber reinforced polymer composite.” International Journal of Reinforced plastics and Composites, Volume 27, No. 16-17, pp.1839-1846.
P.Mishra & Dr. S.K.Acharya, V.Dikshit “Erosive wear behavior of red mud filled metal matrix composite.” International Journal of Reinforced plastics and Composites, Volume 27, No. 2, pp.145-152.
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
Panigrahi, R., Gupta, A. and Bhalla, S., 2008, “Design of tensegrity structure using Artificial Neural Networks”, Structural Engineering and Mechanics, Techno Press, Vol 29, Issue 2, pp 223-235.
Highly enantioselective carbonâ€“carbon bond formation by Cu-catalyzed asymmetric [2,3]-sigmatropic rearrangement: application to the syntheses of seven-membered oxacycles and six-membered carbocyclesG. Kumaraswamy, K. Sadaiah, Duggirala Subrahmanya Ramakrishna N. Police,a B. Sridhar and J. Bharatam aChem. Commun., 2008, 5324â€“5326
P K Sahoo, R Samal, S K Swain, and P K Rana, â€œSynthesis of poly(butylacrylate)/layer silicate nanocomposites fire retardantâ€ European Polymer Journal (Elsevier), 44(9), 3522-3528 (2008). DOI: 10.1016/j.eurpolymj.2008.08.033 (Impact Factor: 3.621)
S Lapshine, S K Swain and A I Isayev, â€œUltrasonic aided process for preparation of polyolefin-clay nanocompositesâ€ Polymer Engineering & Science (Wiley), 48(8), 1584-1591 (2008). DOI: 10.1002/pen.21135 (Impact Factor: 1.551)
R Samal, S K Swain, P K Rana and P K Sahoo, â€œBiodegradable flame retardant poly(butyl acrylate)/silicate nanocomposites by emulsifier-free emulsion techniqueâ€ Journal of Polymer Materials (MD Publications) , 25(3), 397-406 (2008). (Impact Factor: 0.355)
Dr. S.K.Acharya, P.Mishra, Dr.S.C.Mishra “Effect of environment on the mechanical properties of fly ash – jute – polymer Composite.” Indian Journal of Engineering and Material Science, Volume 15, No. 6, pp. 483-488.
P.Mishra & Dr. S.K.Acharya, S.K.Meher, V.Dikshit “Weathering behavior of bagasse fiber reinforced polymer composite.” International Journal of Reinforced plastics and Composites, Volume 27, No. 16-17, pp.1839-1846.
P.Mishra & Dr. S.K.Acharya, V.Dikshit “Erosive wear behavior of red mud filled metal matrix composite.” International Journal of Reinforced plastics and Composites, Volume 27, No. 2, pp.145-152.
S. S. Das, J.P. Panda and M. Mitra, “Unsteady free convective MHD flow and heat transfer of a second order fluid between two heated vertical plates through a porous medium”, Journal of Energy Heat and mass transfer, vol. 29, pp. 137-151, 2007.
J.P. Panda, S.S.Das, A. B. Pattnaik and A.Satpathy, “Effect of induced magnetic field on MHD flow and heat transfer in a conducting elastic- viscous fluid past a continuously moving porous flat surface”, AMSE J. Modelling, Measurement and Control, B, vol. 76, No. 5, pp. 81-92, 2007.
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
Biswal, T., & Sahoo, P. K*. (2007). Synthesis of PAN nanoparticles via nonconventional microemulsion technique using Co (II)/EDTA in situ complex, Indian Journal of Chemical Technology, 14, 119-123 (Scopus, SCIE, IF: 0. 57)
P. Patro, A. Dewan and L. Dayanand, Thermal Performance of a Circular Pin Fin Compact Heat Exchanger, International Journal of Chemical Sciences, 5 (2007) 1929-1937.
Panigrahi, S. K. and Nayak. A. N. (2007), “An Introduction to Self-Compacting Concrete”, Proc: Recent Advances in Civil Engineering, C.E.T., Bhubaneswar, pp. 61-65, 1st -2nd ,March.
S K Swain and A I Isayev, â€œEffect of ultrasound on HDPE/clay nanocomposites: rheology, structure and propertiesâ€ Polymer (Elsevier), 48(1), 281-289 (2007). DOI: 10.1016/j.polymer.2006.11.002 (Impact Factor: 3.771).
J.P. Panda, A B Pattnaik and A. Acharya, “Free convection of conducting viscous fluid between two vertical walls filled with porous material”, AMSE J. Modelling, Measurement and Control, B, vol. 75, no. 3, pp. 31-44, 2006.
J.P. Panda, S. S. Das and A B Pattnaik, “Hydromagnetic unsteady free convective flow and mass transfer of an elastlco-viscous fluid past an infinite vertical porous plate in a rotating porous medium”, AMSE J. Modelling, Measurement and Control, B, vol. 75, no. 3, pp. 57-71, 2006.
S. S. Das , S. K. Sahoo, G. C. Dash and J.P. Panda, “Free convective and mass transfer flow of a viscous incompressible fluid through a porous medium in the presence of source/sink with constant suction and heat flow”, AMSE J. Modelling, Measurement and Control, B, vol. 75, no. 1, pp. 01-20, 2006.
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
Di-Âµ-hydroxy-bis(N,N,N',N'-tetramethylenediamine)-copper(II)chloride [Cu(OH).TMEDA]2Cl2: an efficient, practical catalyst for benzylation and allylation ofÂ amidesG. Kumaraswamy,* A. Pitchaiah, G. Ramakrishna, D. S. Ramakrishna and K. Sadaiaha Tetrahedron Lett. 2006, 47, 2013
P K Sahoo, P K Rana and S K Swain â€œInterpenetrating Polymer Network PVA/PAA Hydrogelsâ€ International Journal of Polymeric Materials and Polymeric Biomaterials (Taylor & Francis) 55(1), 65-78 (2006). DOI: 10.1080/009140390916440 (Impact Factor: 2.263)
S. S. Das , S.K Sahoo and J.P. Panda, “Unsteady free convection MHD flow of a second order fluid between two heated vertical plates through a porous medium with mass transfer and internal heat generation”, AMSE J. Modelling, Measurement and Control, B, vol. 74, no. 7, pp. 41-62, 2005.
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
P K Sahoo, R Mohapatra, A Sahoo. N L Debsarkar, S K Swain â€œCharacterization, biodegradation, and water absorbency of chemically modified tossa variety jute fiber via pulping and grafting with acrylamideâ€ International Journal of Polymer Analysis and Characterization (Taylor & Francis), 10(3-4), 153-167 (2005). DOI: 10.1080/10236660500397845 (Impact Factor: 1.333)
J.P. Panda, S. S. Das and G. C. Dash, “Laminar flow of elastic-viscous liquids through porous parallel stretching plates of different permeability”, AMSE J. Modelling, Measurement and Control, B, vol. 73, no. 5, pp. 15-34, 2004.
J.P. Panda, S. S. Das and G. C. Dash, “Free convection flow and Mass transfer of an elastic-viscous fluid past an infinite vertical porous plate in a rotating porous medium”, AMSE J. Modelling, Measurement and Control, B, vol. 73, no. 1, pp. 37-51, 2004.
J.P. Panda, S. S. Das and G. C. Dash , “Finite difference analysis of hydromagnetic flow and heat transfer of an elastic-viscous fluid between two horizontal parallel porous plates”, AMSE J. Modelling, Measurement and Control, B, vol. 73, no. 2, pp. 31-44, 2004
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
Panigrahi, S. K., Sarda, V. K. and Gupta, A.K. (2004) “Use of fly ash as a backfilling material”, Proc: Materials and their Application in Civil Engineering, N.I.T., Hamirpur (H.P.), ISBN: 81-8048-033-X, pp.133-136, 26-27th , August.
Panigrahi, S. K and Kaur, S. (2004) “Preferential use of high strength materials in civil engineering”, Proc: Materials and their Application in Civil Engineering, N.I.T., Hamirpur (H.P.), ISBN: 81-8048-033-X, pp. 66-69, 26-27th, August.
Panigrahi, S. K., Sarda, V. K. and Gupta, A.K. (2004) “Aerated concrete block as an useful building material”, Proc: Materials and their Application in Civil Engineering, N.I.T., Hamirpur (H.P.), ISBN: 81-8048-033-X, pp. 28-30, 26-27th, August.
Panigrahi, S. K., Sarda, V. K. and Gupta, A.K. (2004) “Rice husk as a substitute for the binding material”, Proc: Materials and their Application in Civil Engineering, N.I.T., Hamirpur (H.P.), ISBN: 81-8048-033-X, pp. 96-97, 26-27th, August.
Panigrahi, S.K. (2004) “Comparative study between columns having T-shape and Square shape”. The Institution of Engineers (India), pp.270-275, 1st, February.
P K Rana, S K Swain, and P K Sahoo â€œSynthesis, characterization, and properties of intercalated poly(2-ethyl hexylacrylate)/silicate nanocomposites: XRD, TEM, IR, TGA, superabsorbency, pressure-sensitive adhesion, and biodegradationâ€ Journal of Applied Polymer Science (Wiley), 93(3), 1007-1011 (2004). DOI: 10.1002/app.20568 (Imp. Factor: 1.919)
P. K.Sahoo, B. Samal and S. K. Swain, â€œCo (III)-mediated microemulsion polymerization of acrylonitrile: kinetics and particle morphologyâ€ Journal of Applied Polymer Science (Wiley) 91(5), 3120-3126 (2004). DOI: 10.1002/app.13485 (Impact Factor: 1.919)
B.B.Pati, K.C.Patra,(2004) “Dither in Two-dimensional System with memoryless nonlinearity and system stability”, Journal of Institution of Engrs. (Ind), Vol.84, March 2004.
J.P. Panda, S. S. Das and G. C. Dash, “Unsteady free convective flow and mass transfer of a rotating elastic-viscous liquid through porous media past a vertical porous plate”, AMSE J. Modelling, Measurement and Control, B, vol. 72, no. 3, pp. 47-59, 2003.
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
Panigrahi, S.K. and Sahoo, A.K. (2003): “Possible use of T-section columns in RC frame”, The Indian Concrete Journal, Scopus, Vol.77, No.12, pp.1518-1522, Link: https://icjonline.com
P K Sahoo, P K Rana A Sahoo, N L Debsarkar, S K Swain â€œCharacterization and properties of chemically modified Corchorus capsularis jute fiber via pulping and grafting: Infrared, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, biodegradation, and superabsorbencyâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 41(17), 2696-2703 (2003). DOI: 10.1002/pola.10813 (Impact Factor: 2.588)
P K Sahoo, G C Sahu and S K Swain â€œNonconventional emulsion polymerization of methyl methacrylate. effect of Cu(II)/histidine complex catalyst and different peroxo-saltsâ€ Polymer Journal (Nature) 35(4), 364-371 (2003). DOI: 10.1295/polymj.35.364 (Impact Factor: 2.170)
P K Sahoo, R Mohapatra, A Sahoo and S K Swain â€œUltrasonic and viscometric investigations of a poly(vinyl alcohol)â€“dextran mixture in aqueous solutionâ€ Journal of Applied Polymer Science (Wiley), 88(14), 3196-3202 (2003). DOI: 10.1002/app.12158 (Impact Factor: 1.919)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
P K Sahoo, S K Swain and N L Debsarkar â€œPreparation, characterization and properties of unbleached, bleached and grafted pulps from JRC-321 variety jute fiberâ€ Journal of Applied Polymer Science (Wiley), 83(4), 1963-1969 (2002). DOI: 10.1002/app.10122 (Impact Factor: 1.919)
S K Swain and P K Sahoo, â€œEmulsifier-free emulsion polymerization of acrylonitrile catalyzed by Co(II)/glycine chelate complexâ€, The Arabian Journal for Science and Engineering (KFUPM), 27(1A) 57-64 (2002). DOI: https://ajse.kfupm.edu.sa/articles/271A_04p.pdf (Impact Factor: 1.092)
P.K. Sahoo, G.C. Sahoo and S. K. Swain â€œEffect of Cu(II)/H2 salen complex on the non-conventional initiated emulsion polymerization of acrylonitrileâ€ European Polymer Journal (Elsevier), 38(2), 345â€“350 (2002). DOI: 10.1016/S0014-3057(01)00187-2 (Impact Factor: 3.621)
B.B.Pati and K.C.Patra,(2002)“Assessing online dispatch approach for energy loss minimisation in power system”,Electrical review April-02.
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
S. K. Swain, N.L.Debsarkar and P.K.Sahoo, â€œGraft Co-polymerization of Acrylamide onto Jute Pulp Initiated by Cu(II)SO4/Glycine/KHSO5/H2OSystemâ€, J. Teach. & Research Chem., 7(1), 17-22 (2000). ISSN# 0971-6408 (India)
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348) (Impact Factor: 614).
S K Swain and P K Sahoo â€œSynthesis of polyacrylonitrile (PAN) catalyzed by Ni(II)/glycine chelate complex through emulsion polymerization initiated by monopersulfateâ€ Indian Journal of Chemical Technology (NISCAIR), 7(5), 259-263 (2000). DOI: http://nopr.niscair.res.in/handle/123456789/22972 (Impact Factor: 0.348)
P K Sahoo, M Dey, A Behera and S K Swain â€œEffect of in situ developed Cu(II)/alanine chelate complex on the emulsion polymerization of acrylonitrile initiated by monopersulfateâ€ Journal of Polymer Materials (Netherlands), 17(2), 177-182 (2000). (Impact Factor: 0.355)
B.B.Pati, K.C.Patra,(2000) "Modelling & Prediction of Forced Oscillations in Two Dimensional Nonlinear System Using Levenberg-Marquardt Approximation Based Neural Network", Jour of Inst. of Engrs (India), Vol.81, June 2000, pp.30-33.
B.B.Pati, K.C.Patra,(2000) “Normalised Phasor Diagram Method of Prediction of Limit Cycle for Two dimensional Nonlinear System”, Journal of Institution of Engrs. (Ind), December-2000.
A.K.Panda, K.C.Patra, and B.B.Pati, (2000)"Studies on Switching Boost Converter", Journal of Institution of Engineers (India), Vol.81, Sept.2000, pp.86-90.
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
P K Sahoo and S K Swain â€œSynthesis of zirconoceneâ€“acetylene and zirconocene-diacetylene polymersâ€ Journal of Polymer Science Part A: Polymer Chemistry (Wiley), 37(21), 3899-3902 (1999). DOI: 10.1002/(SICI)1099-0518(19991101)37:213.0.CO;2-4 (Impact Factor: 2.588)
P K Sahoo, M Dey and S K Swain, â€œEmulsifierâ€“free emulsion polymerization of acrylonitrile: effect of in situ developed Cu(II)/glycine chelate complex initiated by monopersulfateâ€ Journal of Applied Polymer Science (Wiley), 74(12), 2785-2790 (1999). DOI: 10.10023.0.CO;2-X (Impact Factor: 1.919).
K.C.Patra, B.B.Pati, A.Lozowicki,(1999) "Structural formulation and self-oscillation prediction in multidimensional nonlinear closed loop autonomous system", Int. Journal of Applied Mathematics and Computer Science, Poland, vol. 9, No.2, 1999, pp. 327- 346.
B.B.Pati, and K.C.Patra,(1999)"Energy Conservation By Improved Product And Process Design", Electrical Review, pp. 8-9, January, 1999.
B.B.Pati, and K.C.Patra,(1999)"Monitoring Transformer Oil Quality", Electrical Review, pp. 2-4, Nov. 1999.
K.C.Patra, B.B.Pati,(1998)"An investigation of forced oscillation for stabilisation of two dimensional nonlinear system", Journal of Systems and Control Letters, Vol.35, 1998, pp.229-236.
B.B.Pati, K.C.Patra,(1998) "Energy Conservation: Its Planning and Management", Journal of Kurukshetra (I), July 1998,pp. 9-12.
B.B.Pati, and K.C.Patra,(1998) "Matlab/Simulink Prediction of transient behavior of variable pressure operating system of steam power plant", Journal of Power and River Valley Development, Vol.XLVIII, No.9 & 10 Sept.1998, pp.133-135.
S. K. Swain, M. Dey and P. K. Sahoo, â€œEmulsifier-free Emulsion Polymerization of Acrylonitrile in presence of Inorganic powdersâ€ J. Tech. & Research Chem., 4(2), 21-28 (1997). ISSN# 0971-6408 (India)
K.C.Patra, B.B.Pati, and J.Kackprzyk,(1997) "Signal stabilisation of Two dimensional nonlinear relay control systems", Journal of Archives of Control Sc. (Poland), Vol.6(XLII),1997, pp.89-101.
K.C.Patra, and B.B.Pati,(1997) "On Asynchronous Excitation of Two dimensional nonlinear self-oscillating System", Journal of Inst. of Engrs. (Ind), Vol.78, Aug.1997, pp.79-82.
B.B.Pati, N.K.Sahu and K.C.Patra,(1996) "Life Estimation of Transformer Oil under Thermal Stress," Indian Journal of Power and River Valley Development (I), July-August'96, pp.92-95.
K.C.Patra, B.B.Pati and J.Kacprzyk,(1995) "Prediction of Limit Cycle in Non-Linear Multivariable Systems," Archives of Control Sciences, Poland,Vol.4(XL),1995, No.3 & 4, pp.281-297.
B.B.Pati, K.C.Patra, and M.S.Naidu,(1995) "Influence of SF6 Insulatio n on Design and Performance of Gas Insulated System/Equipment (GIS/GIE)", IEEMA Journal,India,Vol.XV,No.7,July-95,pp.6-10.
B.B.Pati, K.C.Patra, (1995)"Least Cost Utility Planning" Energy Conservation Bulletin, A monthly Journal of Energy Conservation Society India, Vol.3, No.12, Dec-1995, pp.1-2.
B.B.Pati, K.C.Patra and M.S.Naidu, (1994)"Variation of Surface Flashover Voltage in SF6 with Pressures" IEEE Trans. on Dielectrics and Electrical Insulation, Vol.1, No.6, Dec.-1994, pp.1175-1179.
B.B.Pati, B.P.Panigrahi, and K.C.Patra,(1994) "Effects of SF6 Release and its By-products on Environment, Personnel Safety, and Equipment Integrity" Jour.of Industrial Pollution Control, India, 10(2), 1994, pp.103-111.
K.C.Patra, K.S.Nanda, and B.B.Pati, (1993)"Energy Conservation by Modified Design of Motor Terminal Box and Dc Motor Field winding Protection-Case Studies", Electrical India, Vol.XXXIII, No.17, Sep.1993, pp.3-8.
B.B.Pati, K.C.Patra, and M.S.Naidu (1993)"Variation of Spacer Efficiency with Gas Pressure for Rod-plane Spacer geometry in SF6 medium under long fronted switching impulse voltages", Electrical India,Vol.XXXIII, No.22, Nov.1993, pp.13-17.
B.K.Barik, N.Sahu, A.Ekka, P.Ekka, S.Padhan, L.Mishra, G.Behera, R.Chabra and L.Swain â€œManufacturing Paradigms and Evolutionâ€,Current Advances in Mechanical Engineering,pp.705-714, https://doi.org/10.1007/978-981-33-4795-3_64
Anil Swain, Santosh Kumar Sahu , Anisha Ekka and Sudhansu Ranjan Das â€œParametric Optimization Of Nd:YAG Laser Microgrooving of Alumina Ceramic Using Integrated RSM-PSO Approachâ€,Emerging Trends in Mechanical Engineering ,pp.1-10, https://doi.org/10.1007/978-981-32-9931_1
Panda S., Mishra, D., (2010), A Study on Development of Fluid Film Bearings, Journal of Mechanical Engineering, Institution of Engineers, Vol. 90, pp. 3-7.
Satpathy, A., Sahu, S.P., Mishra, D., and Patnaik, A., (2009), Plasma sprayed fly ash coating on metal substrates, Material Science: An Indian Journal, Vol. 5, No. 4, pp. 01-07.
Mishra, D., Mishra, T., and Mohanty, R.P., (2008), An exploratory study of quality management practices and product quality outcome: A case study of Indian manufacturing industry, Quality Management Practices, Excel books, pp. 655-662.
Mishra, D., Biswal, B.B., and Mohanty, R.P., (2007), A comparative study of production outsourcing models with emphasis on theory of constraints based approach, Vilakshan XIMB Journal of Management, Vol. IV, No. 1, pp. 31-60.
Mishra, D., Pattanayak, S.K. and Biswal, B.B., (2004), An improved method for outsourcing with maximum throughput in a manufacturing organization, The ICFAI Journal of Operations Management, Vol. III, No. 4, pp. 39-54.
Kanango, R.N. and Mishra, D., (1992), A study on industrial potential of Western Orissa, Western Orissa an Ethos, Silver Jubilee Journal, SU.
Pattnaik, S.K., Mishra, D., Panda, S. (2021), A comparative study of meta-heuristics for local path planning of a mobile robot, Engineering Optimization.
Panda, S., Mishra, D., Biswal, B.B. (2020), An approach for design optimization of 3R manipulator using Adaptive Cuckoo Search algorithm, Mechanics Based Design of Structures and Machines, 48(6), pp. 773â€“798.
Pattanaik, A.K., Pal, K., Mishra, D. (2020), Tribiological investigation and optimization of friction stir spot welding of dissimilar metals by LSSM-ANN method, Mechanics Based Design of Structures and Machines.
Panda, S., Mishra, D., and Biswal, B.B., (2018), Optimum design of 3R manipulator usinghybrid PSOGSA algorithm, International Journal of Mechanism and Robotic Systems,Inderscience.
Panda, S, and Mishra, D., (2018), Process Parameter Optimization of Hydrostatic ExtrusionUsing Metaheuristic, Journal of Advanced Manufacturing Systems, World Scientific 17(4), pp.1â€“18. DOI: 10.1142/S0219686718500270.
Pattanaik, A.K., Panda, S.N., Mishra, B.P., Pal, K., and Mishra, D. (2017), A ComparativeInvestigation to Process Parameter Optimization for Spot Welding Using Taguchi Based GreyRelational Analysis and Metaheuristics, Technology Spectrum Review, 2(1), pp. 1-5.
Panda, S., Biswal, B.B., Jena, S.D., and Mishra, D., (2016), An approach to weightoptimization of a spur gear, Proceedings of the Institution of Mechanical Engineers, Part J:Journal of Engineering Tribology, 231(2), pp. 189-202.
Panda, S., Panda, S.N., Nanda, P., and Mishra, D., (2015), Comparative Study on OptimumDesign of Rolling Element Bearing, Tribology International, Elsevier, 92, pp. 595-604.https://doi.org/10.1016/j.triboint.2015.07.034.
Mishra, D. Panda, S., and Biswal, B.B., (2015), Optimization of Multiple ResponseCharacteristics of EDM Process Using Taguchi-Based Grey Relational Analysis and ModifiedPSO, Journal of Advanced Manufacturing Systems, World Scientific, 14(3), pp. 123-148.https://doi.org/10.1142/S0219686715500092.
Panda, S., Mishra, D., Biswal, B. B., and Tripathy, M., (2014), Revolute ManipulatorWorkspace Optimization using a Modified Bacteria Foraging Algorithm: A ComparativeStudy, Engineering Optimization, Taylor & Francis, 46(2), pp. 181-199.DOI:10.1080/0305215X.2012.753439.
Panda, S., Mishra, D., and Biswal, B. B., (2013), Revolute manipulator workspaceoptimization: A comparative study, Applied Soft Computing, Elsevier, Vol. 13, pp. 899-910.
Satapathy, A., Pradhan, M.K., Mishra, D., and Patnaik, A., (2012), Fabrication, MechanicalCharacterization and FTIR Spectroscopic Analysis of Fish Scale Reinforced Epoxy Composites,Advanced Materials Research, Trans Tech, Vol. 445, pp. 889-892.
Patel, B.C., Acharya, S.K., and Mishra, D., (2012), Environment effect of water absorption andflexural strength of red mud filled jute fibre/polymer composite, International Journal ofEngineering, Science and Technology, Vol. 4, No. 4, pp. 49-59.
Panda, S., Mishra, D., Biswal, B.B., and Choudhury, B.B., (2012), Robot WorkspaceOptimization using a Novel Modified Differential Evolutionary Technique, InternationalJournal of Computational Methods, World Scientific, Vol. 9, No. 3, pp. 1250034-1-21.
Panda, S., Mishra, D., and Biswal, B. B., (2012) A Multi-objective Workspace Optimization of3R Manipulator Using Modified PSO, LNCS, Springer-Verlag, Vol. 7677, pp. 90-97.
Suresh, S.M., Mishra, D., Srinivasan, A., Arunachalam, R.M., and Sasikumar, R., (2011),Production and characterization of micro and nano Al2O3 particle reinforced LM25aluminium alloy composite, ARPN Journal of Engineering and Applied Sciences, Vol. 6, No. 6,pp-94-98.ii
Patel, B.C., Acharya, S.K., and Mishra, D., (2011), Effect of stacking sequence on the erosionwear behavior of jute and jute-glass fabric reinforced epoxy composite, International Journalof Engineering, Science and Technology, Vol. 3, No. 1, pp. 213-219.
Panda, S., and Mishra, D. and Biswal, B. B., (2011), Determination of optimum parameterswith multi-performance characteristics in laser drilling- A grey relational analysis approach,Int. J. Advance Manufacturing Technology, Springer, Vol.54, pp. 957-967.
Choudhury, B.B., Biswal, B. B., Mishra, D. and Mahapatra R.N., (2011), Appropriateevolutionary algorithm for scheduling in FMS, International Journal of Applied EvolutionaryComputation, IGI-Global, Vol. 2, No. 3, pp. 15-26.
Biswal, B.B., Choudhury, B.B., Mishra, D., Dash, P., (2010), An overview and comparison offour sequence generating methods for robotic assembly. International Journal ofManufacturing Technology and Management, Inderscience, Vol. 20, No.1/2/3/4, pp. 169â€“196.
Panda, S., and Mishra, D., (2010), Development of a tribological failure knowledge model,International Journal of Knowledge Engineering & Data Mining, Inderscience, Vol.1, No. 2,pp. 99-114.
Biswal, B.B., Panda, S. and Mishra, D., (2010), Optimization for Workspace Volume of 3RRobot Manipulator Using Modified Differential Evolution, Swarm, Evolutionary, andMemetic Computing, LNCS, Springer-Verlag, Vol. 6466, pp. 111-118.
Mohanty, R.P., Mishra, D. and Mishra, T., (2010), Production as a service: An analysis ofTheory of Constraints (TOC) methods, Journal of Studies on Manufacturing, HyperSciences,Vol.1, No. 2-3, pp. 108-119.
Sahu, S.P., Satapathy, A., Mishra, D., Patnaik, A., and Sreekumar, K.P., (2010), Triboperformanceanalysis of fly ashâ€“aluminum coatings using experimental design and ANN,Tribology Transactions, Taylor and Francis, Vol. 53, No. 4, pp. 533-542.
Mohanty, R.P., Mishra, D. and Mishra, T., (2009), Comparative study of productionoutsourcing models, Journal of Advances in Management Research, Emerald, Vol. 6, No. 1,pp. 41-69.
Satpathy, A., Sahu, S.P., and Mishra, D., (2009), Development of protective coating using flyash premixed with metal powder on aluminium substrates, Waste Management andResearch, Sage, Vol. 1, pp. 01-07.
Panda, S., and Mishra, D., (2009), A Multi-Objective Optimum Design of Dynamically LoadedJournal Bearing for a Prescribed Ã€ Extent Film, SAE Technical paper Series, SAE International,Document no. 2009-01-1679.
Panda, S., and Mishra, D., (2008), Test-rigs for dynamically loaded journal bearing: A study,SAE Technical Paper Series, SAE International, Document no. 2008-01-2759.
Choudhury, B.B., Mishra, D. and Biswal, B.B., (2008), Task assignment and scheduling in aconstrained manufacturing system using GA, International Journal of Agile Systems andManagement, Inderscience, Vol. 3, No. 1/2, pp. 127-146.
(a) Indexed
Mishra, D., Panda, S., and Pattnaik, S., (2011), Workspace volume optimization of 3RManipulator Using a Novel Differential Evolution, ACSE, Dubai, pp.540-543.
Choudhury, B.B., Biswal, B.B. and Mishra, D. (2009), Development of Optimal Strategies forTask Assignment in Multirobot Systems. Advance Computing Conference, IACC, IEEE XPlore,pp. 1130 â€“ 1135.
Salwan, G., Mishra, D. and Pani, S. (2009), A Neural Network Approach for Selection ofPowder Metallurgy Process Parameter of Rapidly Solidified White Cast Iron, Nature &Biologically Inspired Computing, NaBIC-2009, IEEE XPlore, pp. 1276 â€“ 1281.
Panda, S., and Mishra, D., and Biswal, B.B. (2009), An Appropriate Tool for Optimizing theWorkspace of 3R Robot Manipulator, Biologically Inspired Computing, NaBIC-2009, IEEEXPlore, pp. 1156 â€“ 1161.
Panda, S., and Mishra, D., B.B.Biswal, Choudhury, B.B. (2009), An Appropriate Formulationfor Workspace Cross Section Area of 3R Robot Manipulator, Industrial and InformationSystems (ICIIS), IEEE XPlore, pp. 511 - 515.
Choudhury, B.B., Biswal, B.B., Mishra, D., and Panda, S. (2009), A Practical Approach toRobot Selection for Industrial Applications, IEEE Press, pp.1-6.
Choudhury, B.B., Biswal, B.B., Mishra, D., and Mahapatra, R.N., (2009), AppropriateEvolutionary Algorithm for Scheduling in FMS, Proc. of IEEE Computer Society, WorldCongress on Nature & Biologically Inspired Computing, pp.1139-1144.
Kshiramani Naik and Arup Kumar Pal, “Design of a Cryptosystem for DCT Compressed Image using Arnold Transform and Fractional Fourier Transform ”, International Journal of Computer Vision and Robotics(IJCVR) (INDERSCIENCE), vol. 5, no. 3, pp. 335-346, 2015.
Kshiramani Naik, Arup Kumar Pal and Rohit Agarwal, “Selective Image Encryption using Singular Value Decomposition and Arnold Transform ”, The International Arab Journal of Information and Technology, (SCIE Indexed)(In Press).
Arup Kumar Pal, Kshiramani Naik and Rohit Agarwal , “A Steganography scheme on JPEG cover image with Enhanced Visual Quality and Embedding Capacity ”, The International Arab Journal of Information and Technology, (SCIE Indexed) (In Press).
Rudra Kalyan Nayaka, Debahuti Mishra, Amiya Kumar Rath . "A NaÃ¯ve SVM-KNN based stock market trend reversal analysis for Indian benchmark indices", ScienceDirect, Applied Soft Computing,ELSEVIER, Volume 35, October 2015, Pages 670â€“680.
Nihar Ranjan Nayak, Bikram Keshari Mishra, Amiya Kumar Rath and Sagarika Swain, “IMPROVING THE EFFICIENCY OF COLOR IMAGE SEGMENTATION CLUSTERING USING AN ENHANCED CLUSTERING METHODOLOGY”,International Journal of Applied Evolutionary Computation, 6(2), 50-62, April-June 2015,DOI: 10.4018/IJAEC.2015040104.
S. Meenakshi, Amiya Kumar Rath, Seemita Mohanty" A Review on Requisite Generic Attributes for Engineering Graduates", Journal of Engineering Education Transformations, Volume 28, Issue 4, April 2015,pp. 83-91, Online ISSN: 2394 - 1707 Print ISSN : 2349 â€“ 2473.
Gyanendra Kumar Pallai, S Meenakshi, Amiya Kumar Rath , Bansidhar Majhi “A Quantitative Analysis and Behavioral Study of Routing Protocols in MANET”, International Journal of Computer Science and Mobile Computing (IJCSMC), Vol. 3, Issue. 11, November 2014, pg.127 â€“ 136), ISSN 2320â€“088X.
Rajeeb S. Bal, Amiya Kumar Rath "Clustering Structure and Deployment of Node in Wireless Sensor Network", International Journal Information Technology and Computer Science, 2014, 10, 70-76, Published Online September 2014 in MECS (http://www.mecs-press.org/), DOI: 10.5815/ijitcs.2014.10.10.
Rajeeb Sankar Bal, Amiya Kumar Rath “Comparison of Routing Protocols in Wireless Sensor Network" International Journal of Innovative Science, Engineering & Technology (IJISET) www.ijiset.com , ISSN 2348 â€“ 7968, Vol. 1 Issue 4, June 2014, pp. 230-235.
Rajeeb Sankar Bal, Amiya Kumar Rath "Distance Based Dynamic Cluster Head Selection in Wireless Sensor Network", International Journal of Modern Computer Science (IJMCS) ISSN: 2320-7868 (Online) Volume 3, Issue 1, February, 2014, pp 7-13.
Sk. Riazur Raheman, Amiya Kumar Rath, M Hima Bindu “Dynamic Slice of Aspect Oriented Program: A Comparative Study” International Journal on Recent and Innovation Trends in Computing and Communication (IJRITCC) http://www.ijritcc.org/, February 2014 Volume 2 Issue 2.
S.Meenakshi, Amiya Kumar Rath “Emergent Need of Quality Assurance for Engineering Education: India’s perspective”, International Journal of Intelligent Computing & Applied Sciences (IJICAS), ISSN (Print) 2322-0031, Special Issue- January-2014, DRIEMS, pp 3-7.
Amiya Kumar Rath “Introduction to cloud Computing” Invited talk, National Conference on Current Trends in Computing (NCCTC) 23rd-24th March, 2014, Department of Computer Applications, North Orissa University, Baripada, Mayurbhanj, Odisha, India.
P. K Das, S. K Pradhan, H. K. Tripathy and P. K Jena, â€œ Improved real time A*-fuzzy controller for improving multi-robot navigation and its performance analysisâ€ International Journal of Data Science, Inderscience, Vol. 2 no. 2, pp. 105-137, 2017.
MR Panda, P Das, S Pradhan, â€œ Hybridization of IWO and IPSO for mobile robots navigation in a dynamic environmentâ€, Journal of King Saud University-Computer and Information Sciences, Elsevier, (in Press), 2017.
M.R. Panda, P. K Das and S. K Pradhan, â€œOptimal Path Planning for Mobile Robots Using Oppositional Invasive Weed Optimizationâ€ Journal of Computational Intelligence, Wiley, Vol.34. Issue 4, pp. 1072-1100
P. K. Das, Behera, H. S. Behera, and B. K. Panigrahi, â€œA hybridization of an improved particle swarm optimization and gravitational search algorithm for multi-robot path planningâ€. Swarm and Evolutionary Computation, Elsevier Vol- 28, pp. 14-28, 2016.
P. K Das, H.S Behera, S. Das, H.K. Tripathy, B. K Panigrahi and S. K Pradhan, â€œA hybrid improved PSO-DV algorithm for multi-robot path planning in a clutter environmentâ€, Neurocomputing, Elsevier Vol-207, pp. 735-753, 2016.
P. K Das, H. S Behera and B. K Panigrahi, â€œ Intelligent-based multi-robot path planning inspired by improved classical Q-learning and improved particle swarm optimization with perturbed velocity â€ Engineering Science and Technology, an International Journal, Elsevier, Vol.- 19, no-1, pp. 651-669,2016
P. K Das, H. S Behera, P. K Jena and B. K Panigrahi, â€œ Multi-robot path planning in a dynamic environment using improved gravitational search algorithmâ€, Journal of Electrical Systems and Information Technology, Elsevier Vol. 3, no-2, pp. 295-313, 2016.
D. C. Rao, M. R. Kabat, P. K. Das, Jena, P. K. Jena,â€œCooperative Navigation Planning of Multiple Mobile Robots Using Improved Krill Herd.â€ Arabian Journal for Science and Engineering, Springer,Vol.43, pp. 7869-7891, 2018.
P.K Das, A. Mohapatra, and M.R Panda, â€œ Epilepsy disorder detection from EEG signalâ€ International journal of Intelligent Computing and Applied Sciences Vol. 1, no. 1, pp. 41-49, 2013.
P. K Das, S. C Mandhata, C. N Panda and S.N. Patro, â€œ Vision based object tracking by mobile robotâ€, International Journal of Computer Applications Vol. 45, no. 8, pp. 40-42, 2012.
C. Panda, S.N. Patro, P. K. Das and P. K. Gantayat, â€œ Node reliability in WDM optical networkâ€ International Journal of Computer Science Issues, Vol. 9, no. 2, pp. 315-320, 2012.
P Kumar Das, S.N Patro, C. N Panda, B. Balabantaray, â€œ D* lite algorithm based path planning of mobile robot in static Environmentâ€, International Journal of Computer & Communication Technology, Vol. 2, IssueVI, 2011.
P. K. Das, A Konar and R Laishram, â€œ Path Planning of Mobile Robot in Unknown Environmentâ€ International Journal of Communication and Computer Technologies Vol. 1, no. 2, 3-5, pp. 26-31, 2010.
P. K Das, A. Konar and R. Laishram, â€œ Visual perception-based motion planning using road mapâ€, International Journal of Computational vision and robotics, Inderscience Vol. 1, no. 4, pp. 430-440, 2010.
P. K Das, B. M Sahoo, H. S Behera and S. Vashisht, â€œ An improved particle swarm optimization for multi-robot path planningâ€, Innovation and Challenges in Cyber Security (ICICCS-INBUSH), pp. 97-106, 2016
P. K Das, S. C. Mandhata and S. N. Patro, â€œ Real Time Visual Authentication Using Fuzzy Moments.â€, Journal of Theoretical & Applied Information Technology, Vol. 43, no. 2, pp. 236-244, 2012.
P. K Das, S. C. Mandhata, H. S. Behera, S. N. Patro, â€œ Visual Perception based Motion Planning of Mobile Robot using Road Signâ€, International Journal of Computer Applications Vol. 48, no. 15, pp. 4-9, 2012.
Pradipta K Das, S. C. Mandhata, H.S Behera, S.N. Patro,â€ An Improved Q-learning Algorithm for Path-Planning of a Mobile Robotâ€,International journal of computer application,vol-51,No-9,pp 40-46 2012 ISSN 0975 â€“ 8887
Ananya Das, Priyadarsini, Mohapatra,Prakruti Mishra,Pradipta K.Das,Subash C Mandhataâ€ Improved real time A* algorithm for path planning of mobile robot in Quadrant Based Environmentâ€, International Conference on Advanced Computer Theory and Engineering (ICACTE), pp 25-30, 2012 ISBN: 987-9381361-18-8.
U.K.Jena, M.R.Kabat, P.K.Das, â€œReal Time Tracking of Complete Transport SystemUsing GPS in Android Systemâ€, Vol. 6, Issue 1, pp.1205-1207,2018
Aradhana Behura, M. Srinivas, Manas Ranjan Kabat,â€Giraffe kicking optimization algorithm provides efficient routing mechanism in the field of vehicular ad hoc networksâ€ , Journal of Ambient Intelligence and Humanized Computing (2021) https://doi.org/10.1007/s12652-021-03519-9
Tusharkanta Samal, Manas Ranjan Kabat, â€Energy-Efficient Time-Sharing Multichannel MAC Protocol for Wireless Body Area Networksâ€, Arabian Journal of Science and Engineering (2021). https://doi.org/10.1007/s13369-021-06073-w
Tusharkanta Samal, Manas Ranjan Kabat, â€žA prioritized traffic scheduling with load balancing in wireless body area networksâ€ Journal of King Saud University â€“ Computer and Information Sciences (2021) https://doi.org/10.1016/j.jksuci.2020.12.023 4.
Bandita Sahu, Pradipta Kumar Das, Manas Ranjan Kabat, Raghvendra Kumar, â€žMulti-robot cooperation and performance analysis with particle swarm optimization variantsâ€, Multimedia Tools and Applications (2021) https://doi.org/10.1007/s11042-021-10986-x
Bandita Sahu, Pradipta Kumar Das, Manas Ranjan Kabat, Raghvendra Kumar, â€žPrevention of Covid-19 affected patient using multi robot cooperation and Q-learning approach: a solutionâ€. Quality and Quantity (2021). https://doi.org/10.1007/s11135-021-01155-1
Tusharkanta Samal, Sushree Chinmayee Patra, Manas Ranjan Kabat â€žAn adaptive cuckoo search based algorithm for placement of relay nodes in wireless body area networksâ€ Journal of King Saud University â€“ Computer and Information Sciences,(2021) https://doi.org/10.1016/j.jksuci.2019.11.002
Uttam Kumar Jena, Pradipta Kumar Das, Manas Ranjan Kabat, Hybridization of meta-heuristic algorithm for load balancing in cloud computing environment, Journal of King Saud University â€“ Computer and Information Sciences(2020), https://doi.org/10.1016/j.jksuci.2020.01.012
Degal Chandrasekhar Rao, Manas Ranjan Kabat, Pradipta Kumar Das, Prabir Kumar Jena Hybrid IWD-DE: a novel approach to model cooperative navigation planning for multi-robot in unknown dynamic environment, Journal of Bionic Engineering 16(2), 2019, pp235-252.
Satya Prakash Sahoo, Manas Ranjan Kabat, â€žMulti-Constrained Multicast Routing Improved By Hybrid Bacteria Foraging/Particle Swarm Optimizationâ€ Computer Science 20(2) 2019: pp245â€“270
Satya Prakash Sahoo, Manas Ranjan Kabat, A Reference-Based Multiobjective Bacteria Foraging Optimization Technique for QoS Multicast Routing, Arabian Journal of Science and Engineering, Vol 43, Issue 12, 2018, pp7457-7472.
Degal Chandrasekhar Rao, Manas Ranjan Kabat, Pradipta Kumar Das, Prabir Kumar Jena â€žCooperative navigation planning of multiple mobile robots using improved krill herdâ€, Arabian Journal for Science and Engineering 43 (12),2018, 7869-7891.
Rakesh Ranjan Swain, Sonali Mishra, Tusharkanta Samal, Manas Ranjan Kabat, An energy efficient advertisement based multichannel distributed MAC protocol for wireless sensor networks (Adv-MMAC)â€, Wireless Personal Communications 95 (2), 2017,pp.655-682.
Prabhudutta Mohanty,Manas Ranjan Kabat, Energy efficient structure-free data aggregation and delivery in WSN, Egyptian Informatics Journal, 17 (3),2016, pp 273-284
Prabhudutta Mohanty,Manas Ranjan Kabat, Energy efficient reliable multi-path data transmission in WSN for healthcare application, International journal of wireless Information Networks, 23 (2),2016,162-172.
P. Mohanty, M.R.Kabat â€œA Hierarchical Energy Efficient Reliable Transport Protocol for Wireless Sensor Networksâ€ Ain Shams Engineering journal, vol 5(4), pp1141-1155, 2014.
S.P.Sahoo, M.R.Kabat â€œAdaptive Tabu Search based Core Selection Algorithm in Heterogeneous Networkâ€ International Journal on Swarm Intelligence Vol.1, No.3, pp.209 â€“ 225, 2014.
M.K.Patel, M.R.Kabat, C.R.Tripathy â€œA Hybrid ACO/PSO Based Algorithm for QoS Multicast Routing Problemâ€ Ain Shams Engineering journal, vol 5(1), pp113-120, 2014.
P. Mohanty, M.R.Kabat, M.K.Patel â€œAn Energy Aware Transport Protocol in Wireless Sensor Networksâ€ International Journal of Information Processing, volume 6, issue 3, pp. Â 23-31, 2012.
S.S. Maharana, S.P.Sahoo, M.R.Kabat, â€œAdvanced Pattern Based Merge Sort With Poolingâ€ International Journal of Computer Science and Technology,3(2),2012.
M.R.Kabat, M.K.Patel, C.R.Tripathy, â€œA Heuristic Algorithm for Core Selection in Multicast Routingâ€ Journal of Computer Science and Technology 26(6),pp.954-961, 2011.
M.K.Patel, M.R.Kabat, C.R.Tripathy, â€œAn Efficient Algorithm for Delay and Delay-Variation Bounded Core Based Tree Generationâ€ Special Issue of International Journal of Computer and Communication Technology 1(2,3,4) pp.94-100, 2010.
M.R.Kabat, R.Mall, C.R.Tripathy, â€œSupporting QoS aware multicasting in Differentiated Service Networksâ€ International Journal of Information and Communication Engineering 6(2) pp. 115-124, 2010.
M.R.Kabat, M.K.Patel, C.R.Tripathy, â€œAn Efficient Algorithm for Delay- Delay Variation Bounded Multicast Tree Generationâ€ International Journal of Electrical and Electronics Engineering, 3(7) pp. 387-395, 2009.
M.R.Kabat, S.K.Mohanty, R.Mall, C.R.Tripathy, â€œAn Efficient Heuristic Multicast QoS Routing Algorithm for Real-Time Applicationsâ€ International Journal of Information Processing 1(1) pp. 22-29, 2007.
Identification of Flood vulnerable zones in Mahanadi Delta based on post-Hirakud Historical data (Accepted for publication in International Journal of Water)
Kar, A.K., Lohani, A.K. Goel, N.K., and Roy, G.P. (2010) “Development of Flood ForecastingÂ System using Statistical and ANN Techniques in theÂ Â Â Downstream Catchment of Mahanadi basin”, India, Journal of Water Resources and Protection, Vol. 2(10), pp.880-887.
Lohani, A.K., Kar, A.K. and Goel, M.K. (2011) “Mahanadi basin me baadh pravandhan”, National conference on “Jal sansadhano ke prabandhan me navintam taknik ka prayog,” NIH, Roorkee, Dec. 16-17, 2011.
Kar, A. K., Lohani, A. K., Goel, N. K. and Roy, G. P.,(2012) “Application of Clustering Techniques using Prioritised Variables in Regional Flood Frequency Analysis - a Case Study of Mahanadi Basin”, ASCE, Journal of Hydrologic Engineering, Vol. 17(1). pp. 213-223.
Jhajharia, D., Yadav, B.K., Maskey, S., Chatopadhyay, S. and Kar, A.K.(2012)Â “Identification of trends in rainfall, rainy days and 24 hours maximum rainfall over sub-tropical Assam of North-East India.” Elsevier, Journal of CR Geosciences, Vol. 344(2012), pp.1-13.
Â Kar, A.K., Winn, L.L, Lohani, A.K. and Goel, N. K. (2012) “A Soft Computing Based Workable Flood Forecasting Model for Ayeyarwady River basin of Myanmar, ASCE Journal of Hydrologic Engineering, Vol. 17(7). pp. 807-822.
Ajeet Singh Chhabra, Anil Kumar Lohani, VKD Dwivedi, Anil Kumar Kar, Joshi, N. (2014)“Identifying rainfall trends over North India using 1’X1’gided rainfall data(1951-2004), International Journal of Earth Sciences and Engineering, Vol. 7, No.01, pp. 155-163.
Anil Kumar Kar, Anil Kumar Lohani, N K Goel, G P Roy, (2015) “Rain gauge network design for flood forecasting using multi-criteria decision analysis and clustering techniques in lower Mahanadi river basin, India”,Â Journal of Hydrology: Regional Studies, Vol. (4), pp.313-332.
Krishna Kumar Gupta, Anil Kumar Kar, Joy Gopal Jena and Dipti Ranjan Jena “Variation Â Â in Rainfall Trend at Upstream - A Threat towards Filling Schedule of Hirakud Reservoir, Accepted and on Print,Â International Journal of Water.
Krishna Kumar Gupta, Anil Kumar Kar, Joy Gopal Jena and Dipti Ranjan Jena “Forecasting the rainfall pattern on upstream of Hirakud reservoir using L-moment for accessing the inflow” Accepted and on Print,Â International Journal of Engineering and Technology.
02
“Use of fly-ash & other stabilizing agents for construction of cost effective roads in Sambalpur district of Orissa”._INDIAN HIGHWAYS- July â€“ 2010. Pg -21-25
An experimental study on strength behavior of clayey sub grade soil stabilized with rice husk ash & lime for low volume Road construction”.- INTERNAIONAL JOURNAL of Earth science & Engineering _ISSN -0974-5904- Vol- 04 ,NO.2 April â€“ 2011 Pg- 364-372.
“Cost effectiveness of clayey soil & moorum treated with fly-ash & lime for construction of low volume roads” -INTERNAIONAL JOURNAL of Civil & Structural Engineering _ISSN-0976-4399- Vol 02 ,NO.1 Nov- 2011 Pg-370-381.
“Lime stabilization of weak sub grade for construction of rural roads”-INTERNAIONAL JOURNAL of Earth science & Engineering _ISSN -0974-5904- Vol 05, NO.3 June -2012 Pg-554-561.
RenuPrava Dalai, S.Das, and K.Das â€œDevelopment of TiC reinforced austenitic manganese steel.â€ Canadian Metallurgical Quaterly 53, no.3 (2014) 317-325.
RenuPrava Dalai, S.Das, and K.Das â€œEffect of thermo-mechanical processing on the low impact abrasion and low stress sliding wear resistance of austenitic high manganese steels.â€ Wear 420 (2019) 176-183.
RenuPrava Dalai, S.Das, and K.Das â€œRelationship between the microstructure and properties of thermomechanically processed Feâˆ’17Mn and Feâˆ’17Mnâˆ’3Al steels.â€ International Journal of Minerals, Metallurgy, and Materials 26, no. 1 (2019) 64-75.
Diptiranjan Baral, Rahul Mohanta, BhaghyashreeSahoo, RenuPrava Dalai, Prafulla K. Mallik â€œDielectric Properties of Steel Melting Shop (SMS) Slagâ€ Available online 26 August 2021, In press, Corrected Proof.
Saroj Kumar Sahu, Dinesh Kumar Mishra, AjitBehera and RenuPrava Dalai â€œAn overview on the effect of heat-treatment and cooling rates on Ni-based super-alloys.â€ Materials Today: Proceedings47(2021)3309-3312.
Swetapadma Mishra and RenuPrava Dalai â€œA Review on the development of 3rd generation advanced-high strength steels (HSS).â€ ABDU Journal of Engineering Technology 10(2021)1-4.
RenuPrava Dalai â€œMicrostructure and property relationship between Al-4.5Cu alloy and Al-4.5Cu-Al2O3 composite developed by mechanical alloying.â€ Materials Today: Proceedings 44(2021): 2754-2759.
Swetapadma Mishra and RenuPrava Dalai â€œA comparative study on the different heat-treatment techniques applied to high manganese steel.â€ Materials Today: Proceedings 44(2021)2517-2520.
Swetapadma Mishra and RenuPrava Dalai â€œEffect of quenching and partitioning treatment on low carbon medium manganese alloyed steels-A short review.â€ Materials Today: Proceedings 43(2021) 593-596.
RenuPrava Dalai, S. Nath, D.K. Mishra, and G. Behera â€œFabrication of an Al matrix hybrid composite reinforced with Cu, Al2O3 and TiC by mechanical alloying.â€ Materials Today: Proceedings 26(2020): 1841-1844.
B.Behera, D.K.Mishra, S. K. BadJena,and RenuPrava Dalai â€œDevelopment and Characterization of Al2O3 and SiC reinforced Al-Cu Metal Matrix Hybrid Composites.â€ Materials Science Forum 978, ISSN: 1662-9752 (2019): 202-208.
RenuPrava Dalai â€œEffect Of Inter-Critical Heat Treatment On The Microstructure And Properties Of Medium Manganese Steel.â€ Materials Today: Proceedings 18(2019) 2388-2393.
Potential utilization of LD slag and waste glass in composite production in Materials Today Proceedings Volume 33, Part 8, 2020, Pages 5196-5199
Swagatika Mishra, Punyapriya Mishra, Deepak Kumar Mohapatra, Punyatoya Mishra, Dinesh Kumar Mishra, and Krushna Prasad Shadangi "Study of frequency dependence properties of CCTO-BT/polymer composites" Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (2023): 09544062231192178.
Renu Prava Dalai, Sushree P Mohapatra, Debasis Nayak, Dinesh Kumar Mishra, and Ajit Behera "Microstructure, Mechanical, and Tribological Relationship in Cu-12Al-Ni Alloy with Respect to the Variation of Ni Content" Journal of Materials Engineering and Performance (2023): 1-13.
Dibyasha Mohapatra, Dibya Ranjana Behera, and Dinesh Kumar Mishra "Prospective of functionalized graphene as shape memory and self-healing polymer: A review" Materials Today: Proceedings (2023).
Saroj Kumar Sahu, Dinesh Kumar Mishra, Ajit Behera, and Renu Prava Dalai "An overview on the effect of heat-treatment and cooling rates on Ni-based superalloys." Materials Today: Proceedings 47 (2021): 3309-3312.
Dinesh Kumar Mishra, Rutuparna Pattanaik, Gourahari Behera, Renu Prava Dalai, Sushant Kumar Badjena "Development of Al-SiC-TiO2 hybrid composite using powder metallurgy route and the influence of TiO2 variation on microstructure and mechanical properties. International Journal of Materials Research, , 0 (2023). 1-6.
G. M. Naik, B. N. Anjan, R. I. Badiger, Sadashiv Bellubbi, and Dinesh Kumar Mishra "An investigation on effects of wire-EDT machining parameters on surface roughness of INCONEL 718." Materials Today: Proceedings 35 (2021): 474-477.
R. P. Dalai, S. Nath, Dinesh Kumar Mishra, and G. Behera "Fabrication of an Al matrix hybrid composite reinforced with Cu, Al2O3 and TiC by mechanical alloying." Materials Today: Proceedings 26(2020): 1841-1844.
BishnupriyaBehera, Dinesh Kumar Mishra, S. K. BadJena and R. P. Dalai "Development and Characterization of Al2O3 and SiC reinforced Al-Cu Metal Matrix Hybrid Composites." Materials Science Forum 978, ISSN: 1662-9752 (2019): 202-208.
Dinesh Kumar Mishra, Md. Meraj,S. K. BadJenaand Snehanshu Pal "Structural evolution and dislocation behaviour study during nanoindentation of Mo20W20Co20Ta20Zr20 high entropy alloy coated Ni single crystal using molecular dynamic simulation." Molecular Simulation 45, no.7 (2019): 572-584.
Dinesh Kumar Mishra, Md. Meraj,S. K. BadJenaand Snehanshu Pal "Dislocation Interaction and V-Shaped Growth of the Distorted Structure During Nanoindentation of Cu 20 Ni 20 Al 20 Co 20 Fe 20 (high-entropy alloy)-Coated Copper: A Molecular Dynamics Simulation-Based Study." Transactions of the Indian Institute of Metals 72, no.1 (2019): 167-180..
Shubhank Gupta, Aditi Panda, RuchiraNaskar, Dinesh Kumar Mishra and Snehanshu Pal "Processing and refinement of steel microstructure images for assisting in computerized heat treatment of plain carbon steel." Journal of Electronic Imaging 26, no. 6 (2017): 063010.
Prince Kumar Singh, Prvan Kumar Katiyar, A. Lava Kumar, Dinesh Kumar Mishra, and Ajit Behera. "Agglomeration behavior of solid waste materials in steel plants." Emerging Materials Research 5, no. 1 (2016): 171-176.
Barik. H. and Chang, K.S. “Simulation of Two-phase flows with phase change by HLL scheme.” Physics of Fluids, In Preparation, (2016).
Barik. H. “Numerical simulation of two-phase quasi-1D bubbly cavitating nozzle flow solutions” Shock Waves, In Preparation,(2016).
Barik. H. and Chang, K.S. “ Numerical study of shock wave interaction with aqueous foams” Shock Waves, In Preparation, (2016).
Barik, H. and Chatterjee, A., “Complex shock wave reflection configurations in shock-vortex interactions.” Fluid Dynamics Research, Under revision, (2015).
Chang, K. S., Barik, H. and Chang, S. M., “The fundamental shockâˆ’vortex interaction patterns that depend on the vortex flow regimes.” Journal of Computational Fluids Engineering, 14(4), (2009), pp. 70-79.
Chang, K. S., Barik, H. and Chang, S. M., “The shockâˆ’vortex interaction patterns affected by vortex flow regimes and vortex models.” Shock Waves, 19, (2009), pp. 349-360.
Barik, H. and Chatterjee, A., “Existence criteria for reflections in shockâˆ’vortex interactions.” Shock Waves, 16, (2007), 309-320.
Mahapatra S.K. and Barik H., “Numerical modelling of combined conductive and radiative heat transfer within square enclosure using discrete ordinate method.” Journal of Engineering Thermophysics, Vol. 11-2, (2002), pp. 181-194.
M.K.Jena, K.S.Sahu: Solving two point boundary value problem by combining the frame operational matrix method with the shooting method. Proc. Natl. Acad. Sci. India Sect. A.phys.sci (under review).
K.S.Sahu, M.K.Jena. Solution of Initial value problems using an operational matrix, Int.J.Appl. Comput. Math , Vol.06, No.61,(2020).
M.K.Jena, K.S.Sahu, Operational matrices from a frame and their Applications in solving Boundary value problems with mixed Boundary conditions, Int. J. Appl. Comput. Math. Vol (4), No. 127, (2018).
K.S.Sahu, M.K.Jena , Haar Wavelet: History and Its Applications. Springer proceedings in Mathematics and Statistics (Book series), pp.149-157,(2018).
M.K.Jena, K.S.Sahu. Haar Wavelet Operational Matrix Method to solve Initial value problem: A short survey, Int. J. Appl. Comput. Math. Vol (3), pp. 3961-3975, (2017).
Mahendra Kumar Jena and Manas Ranjan Mishra, A new compactly supported Biorthogonal Riesz Basis of Wavelets, Int. J. Intelligent Systems Design and Computing, Vol. 1, Nos. 1/2, (2017).
TO BE UPDATED SOON.....
Mahendra Kumar Jena, P. Shunmugaraj, P. C. Das, A subdivision algorithm for generalized Bernstein-BÃ©zier curves. Computer Aided Geometric Design 18(7): 673-698 (2001)
Mahendra Kumar Jena, P. Shunmugaraj, P. C. Das, A subdivision algorithm for trigonometric spline curves. Computer Aided Geometric Design 19(1): 71-88 (2002)
Mahendra Kumar Jena, P. Shunmugaraj, P. C. Das, A non-stationary subdivision scheme for generalizing trigonometric spline surfaces to arbitrary meshes. Computer Aided Geometric Design 20(2): 61-77 (2003)
Mahendra Kumar Jena, P. Shunmugaraj, P. C. Das, A nonstationary subdivision scheme for curve interpolation, ANZIAM Journal 44(E), E216-E235, 2003.
Mahendra Kumar Jena, Construction of compactly supported wavelets from trigonometric B-splines, International Journal on Wavelet, Multiresolution and Information Processing, Vol. 09, No. 05, pp. 843-865 (2011).
Mahendra Kumar Jena and Manas Ranjan Mishra, Â Computation of Compactly Supported Biorthogonal Riesz Basis of Wavelets, Computational Intelligence in Data Mining, Vol-3, Springer 2015.
Mahendra Kumar Jena, Riesz basis of wavelets constructed from trigonometric B-splines, Analysis and Applications, 13(4), 419-436, 2015.
Communicated - 02
M.R. Jena, SarthakMohapatra, A.K. Panda, G.N. Dash, â€œAnalytical approach assisted simulation study of Si, SiGe, and InP based BJT," International journal of nano electronics and materials, Vol 12, No. 2, apr 2019, pp 237-250.
M.R. Jena, A.K. Panda, G.N. Dash, â€œCap-layer and charge sheet effect in InP based pnp Î´-doped heterojunction bipolar transistor, Microsystem Technologies, Feb 2020 doi.org/10.1007/s00542-020-04764-2.
M.R. Jena, A.K. Panda, G.N. Dash, â€œCap layer effect in DC and RF characteristics of InP based n-p-n metamorphic Î´-doped heterojunction bipolar transistor,â€ International Journal of Electronics Letters, May 2021, https://doi.org/10.1080/21681724.2021.1941280.
M.R. Jena, A.K.Panda, G.N. Dash, â€œSelf-Heating Effects in SiGe Heterojunction Bipolar Transistor with Different Ge Grading Profile, International Journal of Innovative Technology and Exploring Engineering (IJITEE) ISSN: 2278-3075, Volume-8 Issue-12, October 2019.
M.R. Jena, A.K. Panda, G.N. dash, â€œEffect of spacer on the performance characteristics of SiGe HBT, International Journal of Electronics Engineering (ISSN:: 0973-7383) Volume 11 â€¢ Issue 1 pp.. 544-552 Jan 2019-June 2019.
M.R. Jena, A.K.Panda, G.N.Dash, â€œA Comparative Analysis InP/InGaAs Î´ Doped based NPN and PNP HBT, International Journal of Engineering Research & Technology (IJERT), Vol. 8 Issue 09, September-2019.
M.R. Jena, A.K. Panda, G.N.Dash, â€œ Analytical approach assisted simulation study of drift and diffusion-based transistor, IJMECE Vol 6, Issue 5, pp 78-82, sept 2018.
S. Chaine, M. Tripathy, â€œPerformance of static synchronous series compensator and superconducting magnetic energy storage controllers for frequency regulation in two area hybrid wind-thermal power system using Cuckoo Search Algorithmâ€ Engineering Reports, Wiley Publications, pp 1-13, Oct 2020, https://doi.org/10.1002/eng2.12313
Rajat Kanti Samal, M. Tripathy, â€œ A Novel distance metric for evaluating impact of wind integration on power systemâ€ Renewable Energy, Elsevier Sciences pp-722-736, Vol 140, Sept. 2019, ISSN 0960-1481, https://doi.org/10.1016/j.renene.2019.03.094
S. Chaine, M. Tripathy â€œPerformance of CSA optimized controllers of DFIGs and AGC to improve frequency regulation of a wind integrated hydrothermal power systemâ€ Alexendria Engineering Journal, Elsevier Sciences,Vol.58, No.2, pp.579-590, June.2019. ISSN 1110-0168, https://doi.org/10.1016/j.aej.2019.03.007.
M. Tripathy, R.K. Samal, â€œ A new perspective on wind integrated optimal power flow considering turbine characteristics wind correlation and generator reactive limitsâ€ ,Electric Power System Research, Elsevier Sciences, pp.101-115, Vol 170, May 2019, ISSN 0378-7796, https://doi.org/10.1016/j.epsr.2019.01.018.
Rajat Kanti Samal, M. Tripathy. â€œCost and emission additionality capability of wind energy in power systemsâ€ Sustainable Energy Grids and Networks, Elsevier Sciences, Vol.17, March 2019. 100179, ISSN 2352-4677, https://doi.org/10.1016/j.segan.2018.12.001.
Rajat Kanti Samal, M. Tripathy. â€œCost savings and emission reduction capability of wind-integrated power systemsâ€ Electric Power & Energy Systems, Elsevier Sciences ,Vol.104, No.1, pp.549-561, Jan.2019. ISSN 0142-0615, https://doi.org/10.1016/j.ijepes.2018.07.039
Rajat Kanti Samal, M. Tripathy. â€œEstimating wind speed probability distribution based on measured data at Burla in Odisha, Indiaâ€, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, Taylor & Francis, pp-918-930, Sept. 2018, 41:8, 918-930, DOI: 10.1080/15567036.2018.1521888,
Deepak Kumar Lal, A. K. Barisal and M. Tripathy, â€œDifferential evolution algorithm optimized dual mode load frequency controller for isolated wind-diesel power system with SMES & fuel cellâ€, Recent Advances in Electrical and Electronic Engineering (Bentham SciencePublications), Volume 12, Issue 1 2019, pp 50-60 https://doi: 10.2174/2352096511666180411150820
Deepak Kumar Lal,A. K. Barisal and M. Tripathy, â€œLoad frequency control of multi source multi-area nonlinear power system with DE-PSO optimized Fuzzy PID controller in coordination with SSSC and RFBâ€, International Journal of Control and Automation(SERSC Publication), pp-61-80, Vol 11, No. 7, July 2018.
S.Chaine, M. Tripathy, Divesh Jain, â€œNon dominated Cuckoo search algorithm optimized controllers to improve the frequency regulation characteristics of wind thermal power systemâ€ Int. Journal of Engineering Science and Technology, Elsevier Sciences,Vol.20, No.3, pp.1092-1105, June.2017.
A. Panda, M. Tripathy, A.K.Barisal, T. Prakash,â€œA Modified Bacteria Foraging based Optimal Power Flow Framework for Hydro-Thermal-Wind generation system in the presence of STATCOMâ€ Energy, Elsevier Sciences, Vol.124, No.2, pp.720-740, Apr.2017. https://doi.org/10.1016/j.energy.2017.02.090
Ambarish Panda, M. Tripathy. â€œSolution of wind integrated thermal generation system for environmental optimal power flow using Hybrid algorithmâ€. Int. Journal of Electrical Systems and Information Technology, Elsevier Sciences,Vol.3, Issue.2, pp.151-160, September.2016
S.Behera,M. Tripathy, J.K.Satpathy â€œA Novel Approach for Voltage Secure Operation using Probabilistic Neural Network in Transmission Networkâ€ International Journal of Electrical systems and Information Technology, Elsevier Sciences,Vol.3, Issue.1, pp.141-150, May 2016
Ambarish Panda, M. Tripathy, â€œSecurity constrained optimal power flow solution of wind-thermal generation system using Modified bacteria foraging algorithmâ€ Energy, Elsevier Sciences, Vol.93, No.1, pp. 816-827, Dec.2015
S.Chaine, M. Tripathy, S.Satpathy, â€œNSGA-II based optimal control scheme of wind thermal power system for improvement of frequency regulation characteristicsâ€ Ain Shams Engineering Journal, Elsevier Sciences, Vol.6, Issue.3, pp. 851-863, Sept.2015
S.Chaine, M. Tripathy â€œDesign of an optimal SMES for automatic generation control of two area thermal power system using Cuckoo Search algorithmâ€ International Journal of Electrical systems and Information Technology, Elsevier Sciences, Vol.2, Issue.1, pp. 1-13, May.2015
M. Tripathy, S.Mishra â€œCoordinated tuning of PSS and TCSC to improve Hopf Bifurcation margin in multimachine power system by a Modified Bacteria Foraging Algorithmâ€ Electric Power & Energy Systems, Vol.66, No.3, pp.97-109, Mar.2015.
Santi Behera, M. Tripathy, J. K. Satapathy, â€œ Optimal Placement and Sizing of SVC for Load Margin Improvement Using BF Algorithmâ€ International Journal of Electrical, Computer, Electronics and Communication Engineering , World Academy of Science, Engineering and Technology , pp 1572-1577,Vol 8, No 10, 2014.
Ambarish Panda, M. Tripathy, â€œOptimal Power Flow Solution of Wind Integrated Power System using Modified Bacteria Foraging Algorithmâ€ Electric Power & Energy Systems, Vol.54, No.1, pp.306-314, Jan.2014
S. Panda, D. Mishra, B.B. Biswal, M. Tripathy, â€œRevolute Manipulator Workspace Optimisation using a Modified Bacteria Foraging Algorithm: A Cmparative Studyâ€ Engineering Optimization, Taylor & Francis, pp-181-199, Vol. 46 , No.2, Feb. 2014
M. Tripathy, S.Mishra, â€œAn Interval Type-2 based Thyristor Controlled Series Capacitor to Improve Power System Stabilityâ€, IET Generation Transmission & Distribution,Vol.5, No.2, pp.209-222, Feb.2011
Y.Mishra, S.Mishra, M. Tripathy, N.Senroy, Z.Y.Dong, â€œImproving Stability of a DFIG based wind power system with tuned damping controllersâ€, IEEE Trans. Energy Conversion, pp-650-660, Vol. 24 , No.3, Sept. 2009.
S.Mishra, M. Tripathy and J.Nanda, â€œMulti-machine power system stabilizers designed by rule based bacteria foragingâ€, Electric Power System Research., Vol.77, No.12, pp. 1595-1607, Oct. 2007.
M. Tripathy, S.Mishra, â€œBacteria Foraging based solution to optimize both real power loss and voltage stability limitâ€, IEEE Trans. Power Systems pp. 240-248, Vol. 22, No. 1, Feb. 2007.
M. Tripathy, S.Mishra, L.L.Lai, Q.P.Jhang, â€œTransmission Loss Reduction Based on FACTs and Bacteria Foraging Algorithmâ€, IX Parallel Problem Solving from Nature (PPSN), Lecture Notes in Computer Science, pp-222-231,Vol. 4193, 2006, SPRINGER.
S.Mishra, P.K.Dash, P.K.Hota, M. Tripathy, â€œGenetically Optimized Neuro-Fuzzy IPFC for Damping Modal Oscillations of Power Systemsâ€, IEEE Trans. Power Systems pp 1740-47 Vol. 17, No. 4, Nov. 2002.
U.K. Rout, R.K. Sahu, S. Panda, Design and analysis of differential evolution algorithm based automatic generation control for interconnected power system, Ain Shams Engineering Journal, ELSEVIER, Vol. 4, Issue 3, pp. 409-421, 2013.
S.R. Khuntia, S. Panda, ANFIS approach for SSSC controller design for the improvement of transient stability performance, Mathematical and Computer Modeling, ELSEVIER, Vol. 57, pp. 289â€“300, 2013.
S.K. Mohapatra, S. Panda, Stability improvement by SSSC and STATCOM based damping controllers employing differential evolution algorithm, ACTA Electrotehnica,Vol. 54, No. 1, pp. 13-21, 2013.
S. Panda, B.K. Sahu and P.K. Mohanty, Bacteria foraging optimisation algorithm for tuning of PSS and STATCOMâ€“based controller parameters, Int. J. Data Mining, Modelling and Management, INDERSCIENCE, Vol. 5, Issue 4, pp. 351-369, 2013.
S. Panda, S.C. Swain, A.K. Baliarsingh, A.K. Mohanty, SSSCâ€“based controller design employing a multiâ€“objective optimisation technique, Int. J. Modelling, Identification and Control, INDERSCIENCE, Vol. 18, Issue 3, pp. 284-293, 2013.
S.K. Mohapatra, S. Panda, A comparative study between local and remote signal using shunt FACTS compensator based damping, Int. J. Electrical Engineering and Informatics, Vol. 5, N0. 2, pp. 135-153, 2013.
R.K. Sahu, S. Panda, U.K. Rout, P. Roul, Application of gravitational search algorithm for load frequency control of multi area power system, J. Bioinformatics and Intelligent Control, American Scientific Publishers, Vol. 2, Issue 3, pp. 200-210, 2013.
S. Panda, B.K. Sahu and P.K. Mohanty, Design and performance analysis of PID controller for automatic voltage regulator system using simplified particle swarm optimization, J. the Franklin Institute, ELSEVIER, Vol. 349, pp. 2609â€“2625, 2012.
S.R. Khuntia, S. Panda, Simulation study for automatic generation control of a multi-area power system by ANFIS approach, Applied Soft Computing, ELSEVIER, Vol. 12, Issue 1, pp. 333-341, 2012.
S. Panda, Differential evolution algorithm for SSSC-based damping controller design considering time delay, J. the Franklin Institute, ELSEVIER, Vol. 348, Issue 8, pp. 1903-1926, 2011.
S. Panda, Multi-objective PID controller tuning for a FACTS-based damping Stabilizer using non-dominated sorting genetic algorithm-II, Int. J. Electrical Power and Energy Systems, ELSEVIER, Vol. 33, pp. 1296-1308, 2011.
S. Panda, Robust coordinated design of multiple and multi-type damping controller using differential evolution algorithm, Int. J. Electrical Power and Energy Systems, ELSEVIER, Vol. 33, 1018-1030, 2011.
S. Panda, Application of non-dominated sorting genetic algorithm-II technique for optimal FACTS-based controller design, J. the Franklin Institute, ELSEVIER, Vol. 347, Issue 7, pp. 1047-1064, 2010.
S. Panda, S.C. Swain, P.K. Rautray, R. Mallik, G. Panda, Design and analysis of SSSC-based supplementary damping controller, Simulation Modelling Practice and Theory, ELSEVIER, Vol. 18, pp. 1199-1213, 2010.
S. Panda, Modelling, simulation and optimal tuning of SSSC-based controller in a multi-machine power system, World Journal of Modelling and Simulation, WORLD ACADEMIC PRESS, UK, Vol. 6, No. 2, pp. 110-121, 2010.
S. Panda, N.P. Padhy, R.N. Patel, Application and comparison of intelligent optimisation techniques for SSSC-based controller design, Int. J. Intelligent System Technology and Applications. INDERSCIENCE, Vol. 9, No. 2, pp. 169-184, 2010.
S. Panda, S.C. Swain, A.K. Baliarsingh, Differential evolution algorithm for simultaneous tuning of excitation and FACTS-based controller, Int. J. Bio-Inspired Computation, INDERSCIENCE, Vol. 2, No. 6, pp. 404-412, 2010.
S. Panda, N.P. Patidar, R. Singh, A multi-objective genetic algorithm approach for adaptive PSS and TCSC-based controller design, Int. J. Innovative Computing and Applications, INDERSCIENCE, Vol. 1, No. 2, pp. 121-138, 2010.
S. Panda, Multi-objective evolutionary algorithm for SSSC-based controller design, Electric Power System Research. ELSEVIER, Vol. 79, Issue 6, pp. 937-944, 2009.
S. Panda, Differential evolutionary algorithm for TCSC-based controller design, Simulation Modelling Practice and Theory, ELSEVIER, Vol. 17, pp. 1618-1634, 2009.
S. Panda, Multi-objective non-dominated shorting genetic algorithm-II for excitation and TCSC-based controller design, J. of Electrical Engineering, Vol. 60, No. 2, pp. 87-94, 2009.
S. Panda, TCSC-based controller design by multi-objective non-dominated shorting genetic algorithm-II, ACTA Electrotehnica,Vol. 50, No. 2, pp. 108-118, 2009.
S. Panda, N.P. Padhy, Improving the stability of a distribution system embedded with wind turbine induction generators using STATCOM, Int. Energy Journal, Vol. 10, Issue 2, pp. 131-144, 2009.
S. Panda, R.N. Patel, Optimal location of shunt FACTS devices in long transmission lines to improve transient stability, Int. J. Electrical Engineering Education, Vol. 46, Issue 2, pp. 150-163, 2009.
S. Panda, N.P. Padhy, R.N. Patel, A multi-objective GA method for generating pareto solutions for coordinated design of PSS and TCSC, Int. J. Intelligent System Technology and Applications. INDERSCIENCE, Vol. 7, No. 4, pp. 430-445, 2009.
S. Panda, R.K. Sahu, Modelling, simulation and optimal design of a TCSC- based controller in a power system, Int. J. Engineering Systems Modelling and Simulation. INDERSCIENCE, Vol. 1, No. 4, pp. 222-230, 2009.
S. Panda, N.P. Padhy, Comparison of particle swarm optimization and genetic algorithm for FACTS-based controller design, Applied Soft Computing. ELSEVIER, Vol. 8, Issue 4, pp. 1418-1427, 2008.
S. Panda, N.P. Padhy, Optimal location and controller design of STATCOM using particle swarm optimization, J. the Franklin Institute, ELSEVIER, Vol.345, pp. 166-181, 2008.
S. Panda, N.P. Padhy, R.N. Patel, Power system stability improvement by PSO optimized SSSC-based damping controller, Electric Power Components & Systems, Taylor and Francis, Vol. 36, No. 5, pp. 468-490, 2008.
S. Panda, N. P. Padhy, Application of genetic algorithm for PSS and FACTS based controller design, Int. J. Computational Methods, World Scientific, Vol. 5, Issue 4, pp. 607-620, 2008.
S. Panda, N.P. Patidar, R. Singh, Robust coordinated design of excitation and STATCOM-based controller for power system stability improvement, Int. J. Innovative Computing and Applications. INDERSCIENCE, Vol. 1, No. 4, pp. 244-252, 2008.
S. Panda, R.N. Patel, Optimal location of shunt FACTS controllers for transient stability improvement employing genetic algorithm, Electric Power Components and Systems, TAYLOR AND FRANCIS, Vol. 35, No. 2, pp. 189-203, 2007.
S. Panda, R.N. Patel, Transient stability improvement by optimally located STATCOMs employing genetic algorithm, Int. J. Energy Technology and Policy, INDERSCIENCE, Vol. 5, No. 4, pp. 404-421, 2007.
S. Panda, R.N. Patel, Damping power system oscillations by genetically optimized PSS and TCSC controller, Int. J. Energy Technology and Policy, INDERSCIENCE, Vol. 5, No. 4, pp. 457-474, 2007.
S. Panda, N.P. Padhy, R.N. Patel, Robust coordinated design of PSS and TCSC using PSO technique for power system stability enhancement, J. Electrical Systems, Vol. 3, No. 2, pp. 109-123, 2007.
S. Panda, N.P. Padhy, R.N. Patel, Modelling, simulation and optimal tuning of TCSC controller, Int. J. Simulation Modeling, Vol.6, No. 1, pp. 37-48, 2007.
S. Panda, R.N. Patel, Improving power system transient stability with an offâ€“centre location of shunt FACTS devices, J. Electrical Engineering, Vol. 57, No. 6, pp. 365-368, 2006.
S. Panda, A.K. Baliarsingh, S. Mahapatra, S.C. Swain, Supplementary damping controller design for SSSC to mitigate sub-synchronous resonance, Mechanical Systems and Signal Processing, ELSEVIER, doi:10.1016/j.ymssp.2015.07.013, (Impact Factor: 2.256)Â Â
S. Panda, N.K. Yegireddy, Multi-Input Single Output SSSC based damping controller design by a hybrid Improved Differential Evolution-Pattern Search approach, ISA Transactions, ELSEVIER, doi:10.1016/j.isatra.2015.03.012 (Impact Factor: 2.4)
G.T.C. Sekhar, R.K. Sahu, A.K. Baliarsingh, S Panda, Load frequency control of power system under deregulated environment using optimal firefly algorithm. Int. J. Elect. Power and Energy Systems, ELSEVIER, doi:10.1016/j.ijepes.2015.07.025 (Impact Factor: 3.42)
B. K. Sahu, P. K. Mohanty, S. Panda, A novel hybrid LUS-TLBO optimized fuzzy-PID controller for load frequency control of multi-source power system, Int. J. Elect. Power and Energy Systems, ELSEVIER, doi:10.1016/j.ijepes.2015.07.020 (Impact Factor: 3.42).
S. C. Swain, S. Panda, S. Mahapatra, A Multi-Criteria Optimization Technique for SSSC Based Power Oscillation Damping Controller Design, Ain Shams Engineering Journal, ELSEVIER, doi:10.1016/j.asej.2015.05.017 (S. N. Impact factor: 0.932).
R.K. Sahu, G.T.C. Sekhar, S Panda, Automatic generation control of multi-area power systems with diverse energy sources using teaching learning based optimization algorithm, Engineering Science and Technology: an International Journal, ELSEVIER, doi:10.1016/j.jestch.2015.07.011
R.K. Sahu, GTC Sekhar, S Panda, DE optimized fuzzy PID controller with derivative filter for LFC of multi source power system in deregulated environment, Ain Shams Engineering Journal, ELSEVIER, doi:10.1016/j.asej.2014.12.009 (S. N. Impact factor: 0.932).
R.K. Sahu GTC Sekhar, S. Panda, A hybrid DE-PS algorithm for load frequency control under deregulated power system with UPFC and RFB, Ain Shams Engineering Journal, ELSEVIER, doi:10.1016/j.asej.2015.03.011 (S. N. Impact factor: 0.932).
R.K. Sahu, S. Panda, P.C. Pradhan, Design and analysis of hybrid firefly algorithm-pattern search based fuzzy PID controller for LFC of multi area power systems, Int. J. Elect. Power and Energy Systems, ELSEVIER, Vol. 69, pp. 200-212, 2015. (Impact Factor: 3.42)
GTC Sekhar, R.K. Sahu, S. Panda, AGC of a multi-area power system under deregulated environment using redox flow batteries and interline power flow controller, Engineering Science and Technology: an International Journal, ELSEVIER, doi:10.1016/j.jestch.2015.04.002
S. Panda, S. Harish Kiran, S.S. Dash, C. Subramani, A PD-type multi input single output SSSC damping controller design employing hybrid improved differential evolution-pattern search approach, Applied Soft Computing, ELSEVIER, Vol. 32, pp. 532â€“543, 2015. (Impact Factor: 2.679)
R.K. Sahu, S. Panda, S. Padhan, A Novel Hybrid Gravitational Search and Pattern Search Algorithm for Load Frequency Control of Nonlinear Power System, Applied Soft Computing, ELSEVIER, Vol. 29, pp. 310â€“327, 2015. (Impact Factor: 2.679)
S. Panda, S. C. Swain, S. Mahapatra, A Hybrid BFOA-MOL approach for FACTS-based damping controller design using modified local input signal, Int. J. Electrical Power and Energy Systems, ELSEVIER, Vol. 67, pp. 238â€“251, 2015. (Impact Factor: 3.432)
B. K Sahu, P. K. Mohanty, S. Pati, S. Panda, Teaching learning based optimization algorithm based fuzzy PID controller for automatic generation control of multi area power system, Applied Soft Computing, ELSEVIER, Vol. 27, pp. 240â€“249, 2015. (Impact Factor: 2.679)
R. K. Sahu, S. Panda, G.T. Chandra Sekhar, A novel hybrid PSO-PS optimized fuzzy PI controller for AGC in multi area interconnected power systems, Int. J. Electrical Power and Energy Systems, ELSEVIER, Vol. 64, pp. 880-893, 2015. (Impact factor: 3.432)
R. K. Sahu, S. Panda, S. Padhan, A hybrid firefly algorithm and pattern search technique for automatic generation control of multi area power systems, Int. J. Electrical Power and Energy Systems, ELSEVIER, Vol. 64, pp. 9-23, 2015. (Impact factor: 3.432)
R. K. Sahu, S. Panda, G.T. Chandra Sekhar, A novel hybrid PSO-PS optimized fuzzy PI controller for AGC in multi area interconnected power systems, Int. J. Electrical Power and Energy Systems, ELSEVIER, Vol. 64, pp. 880-893, 2015. (Impact factor: 3.432)
R. K. Sahu, S. Panda, S. Padhan, A hybrid firefly algorithm and pattern search technique for automatic generation control of multi area power systems, Int. J. Electrical Power and Energy Systems, ELSEVIER, Vol. 64, pp. 9-23, 2015. (Impact factor: 3.432)
S Panda, S Mahapatra, SC Swain, Modelling, simulation and optimal tuning of FACTS controller in a multi-machine power system, Int. J. Applied Systemic Studies, INDERSCIENCE, Vol. 6, No. 1, pp. 42-56, 2015.
B. K Sahu, S. Pati, S. Panda, Hybrid differential evolution particle swarm optimisation optimised fuzzy proportionalâ€“integral derivative controller for automatic generation control of interconnected power system, IET Generation, Transmission & Distribution, Vol. 8, Issue 11, pp. 1789 â€“ 1800, 2014. (Impact factor: 1.307)
R.K. Sahu, S. Panda, N. K Yegireddy, A novel hybrid DEPS optimized fuzzy PI/PID controller for load frequency control of multi-area interconnected power systems, Journal of Process Control, ELSEVIER, Vol. 24, Issue 10, pp. 1596-1608, 2014. (Impact factor: 2.179)
B. Mohanty, S. Panda, P. K. Hota, Differential evolution algorithm based automatic generation control for interconnected power systems with non-linearity, Alexandria Engineering Journal, ELSEVIER, Vol. 53, Issue 3, pp. 537-552, 2014. (Impact factor: 3.432)
S. Mahapatra, S. Panda, S. C. Swain, A hybrid firefly algorithm and pattern search technique for SSSC based power oscillation damping controller design, Ain Shams Engineering Journal, ELSEVIER, Volume 5, Issue 4, pp. 1177â€“1188, 2014. (S. N. Impact factor: 0.932)
P. K. Mohanty, B. K. Sahu, S. Panda, Tuning and Assessment of Proportionalâ€“Integralâ€“Derivative Controller for an Automatic Voltage Regulator System Employing Local Unimodal Sampling Algorithm, Electric Power Components and Systems, Taylor & Francis,Â Vol. 42, Issue 9, pp. 959-969, 2014. (Impact factor: 0.664)
S. Padhan, R. K. Sahu, S. Panda, Automatic generation control with thyristor controlled series compensator including superconducting magnetic energy storage units, Ain Shams Engineering Journal, ELSEVIER, Vol. 5, Issue 3, pp. 759-774, 2014. (S. N. Impact factor: 0.932)
R. K Sahu, S. Panda, S. Padhan, Optimal gravitational search algorithm for automatic generation control of interconnected power systems, Ain Shams Engineering Journal, ELSEVIER, Vol. 5, Issue 3, pp. 721-733, 2014. (S. N. Impact factor: 0.932)
S. Padhan, R. K. Sahu, S. Panda, Application of Firefly Algorithm for Load Frequency Control of Multi-area Interconnected Power System, Electric Power Components and Systems, Taylor & Francis, Vol. 42, Issue 13, pp. 1419â€“1430, 2014. (Impact factor: 0.664)
B. Mohanty, S. Panda, P.K. Hota, Controller parameters tuning of differential evolution algorithm and its application to load frequency control of multi-source power system, Int. J. Electrical Power and Energy Systems, ELSEVIER, Vol. 54, pp. 77-85, 2014. (Impact factor: 3.432)
R.K. Sahu, S. Panda, N. K Yegireddy, A novel hybrid DEPS optimized fuzzy PI/PID controller for load frequency control of multi-area interconnected power systems, Journal of Process Control, ELSEVIER, Vol. 24, Issue 10, pp. 1596-1608, 2014. (Impact factor: 2.179)
S. Panda, B. Mohanty, P.K. Hota, Hybrid BFOA-PSO algorithm for automatic generation control of linear and nonlinear interconnected power systems, Applied Soft Computing, ELSEVIER, Vol. 13, Issue 12, pp. 4718-4730, 2013.
S. Panda, Narendra K.Y, Automatic generation control of multi-area power system using multi-objective non-dominated sorting genetic algorithm-II, Int. J. Electrical Power and Energy Systems, ELSEVIER, Vol. 53, pp. 54-63, 2013. (Impact factor: 3.432)
S. Panda, Narendra K.Y, S.K. Mohapatra, Hybrid BFOA-PSO approach for coordinated design of PSS and SSSC-based controller considering time delays , Int. J. Electrical Power and Energy Systems, ELSEVIER, Vol. 49, pp. 221â€“233, 2013. (Impact factor: 3.432)
R.K. Sahu, S. Panda, U.K. Rout, DE optimized parallel 2-DOF PID controller for load frequency control of power system with governor dead-band nonlinearity, Int. J. Electrical Power and Energy Systems, ELSEVIER, Vol. 49, pp. 19-33, 2013. (Impact factor: 3.432)
“Exploring the Intersection of Design and Discourse: The Role of Architectural Journalism in Shaping our Built Environment.” Published by: Communication Today, October- December 2024. Page 61-68 ISSN: 0975-217X. UGC Care Indexed.
“Advanced photogrammetric techniques for heritage conservation: A case study of visual and architectural preservation of the Jagannath Temple, Puri” Published in ESTOA 28, July - December 2025, Page 150-162. ISSN: 1390-7263. SCOPUS Indexed. DOI: https://doi.org/10.18537/est.v014.n028.a11
Sarangi, Shaswat Sekhar. (2017) â€œSynthesis of Socio-cultural attributes in context of sustainable architecture in Indiaâ€, at A national level conference on "Recent trends in Architecture: Issues and Opportunities" at NIT Raipur
Sarangi, Shaswat Sekhar. (2017) â€œInfluence of vernacular architecture in evolution of temple forms of Odishaâ€, International Journal for Innovative Research in Science & Technology (International Journal), Vol. 4, Issue 2.
Mohapatra, S., Sharp, B., Sahoo, A. K., & Sahoo, D. (2022). Decomposition of climate-induced productivity growth in Indian agriculture. Environmental Challenges, 7(1), 1-15
Sahoo, A. K., Sahoo, D. & Sahu, N. C. (2020). Productivity Growth and Policy Changes: A Decomposition Analysis of Indian Metallic Mining. Journal of Public Affairs, 20(3), 1-12
Sahoo, A. K., Sahu, N. C. & Sahoo, D. (2018), Impact of Policy Reforms on the Productivity Growth of Indian Coal Mining: A Decomposition Analysis. Resources Policy, 59(3), 460-467.
Sahu, N. C., & Sahoo, A. K. (2017). Determinants of Household Participation in Forest Protection in Odisha State, India: An Empirical Investigation. International Journal of Business and Management Studies, 6(2), 313-320.
Sahoo, A. K, N. C. Sahu and B. B. Pradhan (2017), "Determinants of Financial Inclusion in Tribal Districts of Odisha: An Empirical Investigation", Social Change, Vol. 47, No. 1, pp. 45-64
Sahoo, A. K., D. Sahoo and N.C. Sahu (2017), “Productive performance of Indian mining industry: A stochastic frontier decomposition”, Global Journal of Business, Economics and Management: Current Issues, Vol. 7, No. 1, pp. 80-88
Samantaraya, A., A. K. Sahoo, A. Mallick and B. Bhuyan (2014), "Has Odisha Become Less Poor in the Last Decade?", Economic and Political Weekly, Vol. 49, No. 46, pp. 62-67
Sahoo, A. K., D. Sahoo and N. C. Sahu (2014), “Mining export, industrial production and economic growth: A cointegration and causality analysis for India”, Resources Policy, Vol. 42, No. 1, pp. 27-34.
Sahoo, A. K., N. C. Sahu, D. Sahoo and B. B. Pradhan (2014), “Mineral Export and Economic Growth in India: Evidence from VAR model Analysis”, Mineral Economics, Vol. 27, No. 1, pp. 51-58.
Sahoo A. K. and N. C. Sahu (2014), “Investigating the presence of resource curse hypothesis in mining sector of India”, International Journal of Environmental Engineering, Vol. 1, No. 2, pp. 1-5.
Sahoo, A. K. and N. C. Sahu (2013), â€œPre land acquisition conflict, displacement and livelihood problems: A case study of lower Suktel irrigation project of Odishaâ€, Orissa Economics Journals, Vol. 45, No. 1 & 2, pp. 59-71
Women, Legacy and Hyphenated Identity in Bapsi Sidhwa’s Ice Candy Man and Deepa Mehta’s 1947: Earth. JAC: A Journal of Composition Theory (JCT). ISSN: 0731-6755, Vol. 13, Iss. 3, March 2020. Page 224-230.
Culture, Exploitation and Nature in Conrad’s Heart of Darkness. Journal of Higher Education and Research Society: A Refereed International. ISSN: 2349-0209, Vol. 8, Iss. 2, October 2020. Page 72-81.
Voice of the Marginals in the Novels of Anna Bhau Sathe’s Fakira and Bama’s Karukku. Cape Comorin: An International Multidisciplinary Double-Blind Peer-reviewed Research Journal. ISSN: 2582- 1962, Vol. 4, Iss. 1, September 2022. Page 176-181.
Masked Women and Myths in The Thousand Faces of Night. Litinfinite Journal. ISSN: 2582- 0400, Vol. 2, Iss. 2, December 2020. Page 01-10.
Deconstructing â€˜Nari tu Narayaniâ€™ (The Flickering Hope of the Marginalised Women): A Postcolonial Overview of My Story, Journal of the Gujarat Research Society (ISSN: 0374-8588), Vol. 10, Iss. 10, November 2019. Page 271-276.
Detachment from Reality: A Study of Woman-Heroes in Margaret Atwoodâ€™s The Edible Woman and Lady Oracle, International Journal of English Language, Literature in Humanities (ISSN: 2321-7065), Vol. 7, Iss. 1, January 2019. Page 2013-20.
Understanding the Inner-Self in Shashi Deshpandeâ€™s Small Remedies: A Transition from Dark to Light, International Journal of Research and Analytical Reviews (ISSN: 2349-5138), Vol. 6, Iss.1, January 2019. Page 1144-46.
The Tale of Woman as â€˜Otherâ€™ in Deshpandeâ€™s Roots and Shadows and Atwoodâ€™s The Handmaidâ€™s Tale. Bodhi International Journal of Research in Humanities, Arts and Science. E-ISSN: 2456-5571, Vol. 3, special Iss. 7, November 2018. Page 5-9.
A Woman’s World in Shashi Deshpande’s The Dark Holds No Terrors: A Feminist Study, LITERARY ORACLE (ISSN: 2348-4772), Vol. I, Iss. I, Jan-June 2014. Page 67-81.
Exploring the Female Body and Identity of Marian McApin: A Study of Margaret Atwood’s The Edible Woman. Remarking (Social Research Foundation) ISSN: 2455-0817, Vol. III, Iss. I, June 2016. Page 113-116.
The Indecisiveness and Hypocrisy of Holden in J. D. Salinger’s The Catcher in the Rye, Global Research Analysis (GRA) ISSN: 2277-8160. Vol. II, Iss. IV, April 2013. Page 175-176.
The Spark of Evil within Man as a Driving Factor in Golding’s Lord of the Flies: A Study, Indian Journal of Applied Research (IOSR) ISSN: 2249-555X. Vol. III, Iss. V, May 2013. Page 1-3.
Kiran Desai’s The Inheritance of Loss: Elements of American Dream and Globalization, IOSR Journal of Humanities and Social Science (IOSR-JHSS) ISSN: 2279-0837. Vol. XI, Iss. II, April 2013. Page 79-81.
Gender and Disharmony in Shashi Deshpande’s That Long Silence, International Journal of English Literature (IJEL) ISSN: 2141-2626, Vol. V, Iss. IV, June 2014. Page 97-100.
Elements of Humanism in the Novel of Anita Desai’s Cry, The Peacock. International Journal of English language, Literature and Humanities (IJELLH) ISSN: 2321-7065, Vol. IV. Iss. VII, July 2016. Page 518-524
The Strangled Voice of Urmila and Other Female Protagonists in Shashi Deshpande’s The Binding Vine. Langlit: An International Peer-Reviewed Journal. ISSN 2349-5189, Vol. 3, Iss. 3, February 2017. Page 544-549.
Environmental Re-Imagination in Margaret Atwood’s Surfacing. The Criterion: An International Journal in English. ISSN 0976-8165. Vol. 8. Iss. 3, June 2017.
MPK Sahoo, N Kumar, RNP Choudhary, Structural, dielectric and electrical properties of LiBaFeWO6, J. Alloys Compd (2010) 478, 49. (Impact factor 4.6)
Yogendra Kumar Yadav, MPK Sahoo, RNP Choudhary, Electrical properties of Bi2TiO5 ceramic, J. Alloys Compd (2010) 490, 589. (Impact factor 4.6)
MPK Sahoo, RNP Choudhary, Dynamics of nano-cluster in a new relaxor system:(PbMg1/3Nb2/3O3)/(BiFeO3), Solid state sciences (2010) 12, 1257. (Impact factor 2.4)
MPK Sahoo, RNP Choudhary, Evidence of relaxor freezing in Pb(Mg1/3Nb2/3)O3/BiFeO3 ceramics, Solid state communications, 150, 2236. (Impact factor 1.5)
PS Sahoo, MPK Sahoo, RNP Choudhary, Dielectric and impedance properties of Ba2Sr3DyTi3V7O30 ceramics, J Mater Sci Mater El, (2012), 23, 1313, (Impact factor: 1.48)
BB Mohanty, PS Sahoo, MPK Sahoo, RNP Choudhary, Synthesis and Electrical Analysis of Ba5GdTi3V7O30 Ceramics, , Mater Sci Appl, (2012), 3, 173, (Impact factor: 0.96)
BB Mohanty, PS Sahoo, MPK Sahoo, RNP Choudhary, Impedance spectroscopy of Ba5GdTi3V7O30, Journal of Modern Physics, (2012), 3, 357, (Impact factor: 0.82)
MPK Sahoo, RNP Choudhary, Phase transition and electrical properties of PbMg1/3Nb2/3O3-BiFeO3 solid solution, Mater Lett, (2012), 67, 308, (Impact factor: 2.57)
Y. Zhang, J Wang, MPK Sahoo, T Shimada, T Kitamura, Hybrid improper ferroelectricity in SrZrO3/BaZrO3 superlattices, Phys. Chem. Phys. Chem., ISSN: 1463-9076, (2016), 18, 24024, (Impact factor: 4.12)
Y. Zhang, J Wang, MPK Sahoo, T Shimada, T Kitamura, Mechanical control of magnetism in oxygen deficient perovskite SrTiO3, Phys. Chem. Chem. Phys., ISSN: 1463-9076, (2015), 40, 27136, (Impact factor: 4.12)
Y. Zhang, MPK Sahoo, T Shimada, J Wang, H Zhou, T Kitamura, Interplay of coupling between strain and rotation in ferroelectric SrZrO3/SrTiO3 perovskite superlattices, J. Phys. Condens. Matter (2015) 27, 385901, (Impact factor: 2.64)
MPK Sahoo, Y. Zhang, J. Wang, Enhancement of ferroelectric polarization in layered BaZrO3/BaTiO3 superlattices, Phys. Lett A. (2016) 380, 299, (Impact factor: 1.77)
Y. Zhang, MPK Sahoo, J Wang, Strain controlled ferromagnetic-ferrimagnetic transition and vacancy formation energy of defective graphene, Nanotechnology, (2016), 27, 435206, (Impact factor: 3.44)
MPK Sahoo, Y. Zhang, J. Wang, RNP Choudhary, Composition control of magnetoelectric relaxor behavior in multiferroics BaZr0.4Ti0.6O3/CoFe2O4 Composites, J. Alloy Compd. (2016) 657, 12, (Impact factor: 3.13)
MPK Sahoo, Y. Zhang, J Wang, Nanoscale Magnetism and Novel Electronic Properties in Bilayer Bismuth (111) Film with Vacancies and Chemical Doping, Phys. Chem. Chem. Phys (2016) 18, 20550, (Impact factor: 4.12)
MPK Sahoo, J. Wang, Y. Zhang, T. Shimada, T. Kitamura, Modulation of Gas Adsorption and Magnetic Properties of Monolayer-MoS2 by Antisite Defectand Strain, J. Phys. Chem. C (2016) 120, 14113, (Impact factor: 4.53)
Y. Zhang, MPK Sahoo, J.Wang, Tuning the band gap and polarization of BaSnO3/SrSnO3 superlattices for photovoltaic applications, Phys. Chem. Chem. Phys, (2017) 19, 7032, (Impact factor: 4.12)
Yajun Zhang, Jie Wang, M. P. K. Sahoo, T. Shimada, T. Kitamura, Strain-induced ferroelectricity and lattice coupling in BaSnO3 and SrSnO3, Phys. Chem. Chem. Phys, (2017) 19, 26047, (Impact factor: 4.12)
Yajun Zhang, MPK Sahoo, T. Shimada, T. Kitamura and Jie Wang, â€œStrain-induced improper ferroelectricity in Ruddlesden-Popper perovskite halidesâ€, Phys. Rev B (2017) 96,144110 (Impact factor: 3.718)
Jie Wang, Yajun Zhang, MPK Sahoo, Takahiro Shimada, Takayuki Kitamura, Philippe Ghosez, Tong-Yi Zhang, Giant magnetoelectric effect at the graphone/ferroelectric interface, Scientific Reports (2018) 8, 1.
M Mishra, Y Zhang, D Mishra, MPK Sahoo, PK Pradhan, AK Pattanaik, Defect driven do ferromagnetism and colossal dielectric behavior in Bi(Zn0.5Ti0.5)O3â€“PbTiO3 ceramics, Ceramic International, (2019) 45, 22948 (Impact factor 3.8)
H.K. Mallick, Yajun Zhang, Jagabandhu Pradhan, MPK Sahoo, AK Pattanaik, Influence of particle size and defects on the optical, magnetic and electronic properties of Al doped SnO2 nanoparticles, J. Alloys Compd. (2021) 854, 156067. (Impact factor 4.6)
RL Nayak, SS Dash, Y Zhang, MPK Sahoo, Enhanced Dielectric, Thermal Stability, and Energy Storage Properties in Compositionally Engineered Lead-Free Ceramics at Morphotropic Phase Boundary, Ceramic International (2021) DOI: 10.1016/j.ceramint.2021.03.033. (Impact factor 3.8)
Jagabandhu Pradhan, H.K. Mallick, MPK Sahoo, AK Pattanaik, Enhanced optical and dielectric properties of rare-earth co-doped SrTiO3 ceramics, Journal of Materials Science: Materials in Electronics, 2021, Accepted. (Impact factor 2.2)
U. Laha, A. K. Behera, M. Majumdar and J. Bhoi: â€œThe Fredholm determinant for HulthÃ©n-distorted non-local separable potential: Application to Î± - Î± elastic scatteringâ€™â€™ , PramanaJouranal of Physics, 94(1), 1-10 (2020).
A.K. Behera, B. Khirali, U. Laha and J. Bhoi: â€˜â€™ Construction of an energy dependent Potential by a Talyor series expansionâ€, Theoretical and Mathematical Physics, 205(1), 1353-1363 (2020).
A.K. Behera, J. Bhoi, U.Laha and B. Kirali: â€˜â€™Study on nucleon-nucleon and alpha-nucleon elastic scattering by Manning-Rosen potentialâ€, Communication in Theoretical Physics, 72(7), 075301 (2020).
B. Khirali, A. K. Behera, J. Bhoi and U. Laha: â€œOn- and Off-shell Jost Functions for Manning-Rosen Potentialâ€, PhysicaScripta, 95(7), 075308 (2020).
A.K. Behera, U. Laha, P. Sahoo and J. Bhoi: â€œHulthÃ©n Half-Shell T-Matrix-Application to np and nd scatteringâ€, Journal of Korean Physical Society, 76, 782-787 (2020).
A. K. Behera, U. Laha and J. Bhoi: â€œGenerating velocity dependent potential in all partial wavesâ€, Turkish Journal of Physics, 44(2), 229-238 (2020).
U. Laha, A.K. Behera and J. Bhoi: â€œPhase Equivalent energy â€“dependent potential â€“A Supersymmetric Approachâ€, Malaysian Journal of Science, 63-71 (2020).
B. Khirali, A. K. Behera, J. Bhoi and U. Laha : â€œScattering with Manning-Rosen Potential n all partial wavesâ€™â€™, Annals of Physics, 412, 168044 (2020).
B. Khirali, A. K. Behera, J. Bhoi and U. Laha : â€œRegular and Jost states for the S-wave Manning-Rosen potentialâ€, Journal of Phys. G: Nucl& Part., 46(11), 115104 (2019).
J. Bhoi, A. K. Behera and U. Laha: â€œOff-shell Jostfunctions for the HulthÃ©nPotential in all partial wavesâ€, Journal of Mathematical Physics, 60(8), 083502 (2019).
A.K.Behera, U.Laha, M.Majumder and J. Bhoi: â€œOn the Î±-C12 Elastic scattering, J of Korean Physical Societyâ€, 74(5), 428-433 (2019).
J. Bhoi and U. Laha: â€œPotentials and phase shifts for nucleon-light nuclei systemsâ€, Pramana-Journal of Physics, 91(6), 1-11 (2018).
J. Bhoi, M. Majumder and U. Laha: â€œHigher partial wave energy dependent and independent two-nucleon interactions via supersymmetry formalismâ€, Indian J of Pure and Applied Physics, 56(7), 538-543 (2018).
U. Laha, M. Majumder and J. Bhoi :â€œVolterra integral equation-factorization method and nucleus-nucleus elastic scatteringâ€, Pramana J of Phys. 90(4), 1-7 (2018).
J. Bhoi, R. Upadhyaya and U. Laha: â€œParameterization of the nuclear HulthÃ©n potential for the nucleus-nucleus elastic scatteringâ€, Communication in Theoretical Physics, 69, 203-210 (2018).
UjjwalLaha, Sanjib Kr. Das and Jhasaketan Bhoi: â€œLocalization of non-local interactionsâ€, Turkish Journal of Physics 41, 447-462 (2017).
U. Laha, S. Ray, S. Panda and J. Bhoi: â€œLaplace transforms of the HulthÃ©n Greenâ€™s function and their applications to potential scatteringâ€, Theoretical and Mathematical Physics 193(1), 1499 (2017).
J. Bhoi and U. Laha: â€œHulthÃ©nPotential models for Î±-Î± and Î±-3He elastic scatteringâ€, Pramana J of Physics 88, Issue 3, 44 (2017).
J. Bhoi and U. Laha: â€œSupersymmetry inspired low energy Î±-p elastic scattering phasesâ€, Theoretical and Mathematical Physics 190(1), 69-76 (2017).
J. Bhoi and U. Laha: â€œNucleon-nucleon Scattering by the HulthÃ©nPotentialâ€, Journal of Nuclear Engineering & Technology, Vol. 6, Issue-2, Page 1-7 (2016).
U. Laha and J. Bhoi: â€œOn and off-shell Jost functions and their integral representationsâ€, Pramana Journal of Physics 86, Issue 5, 947 (2016).
J. Bhoi and U. Laha: â€œElastic scattering of light nuclei through a simple potential modelâ€, Physics of Atomic Nuclei 79, Issue 3, 370 (2016).
J. Bhoi and U. Laha: â€œNucleon-nucleon scattering phase shifts via Supersymmetry and the Phase function methodâ€, Brazilian Journal of Physics 46, Issue 1, 129 (2016).
U. Laha and J. Bhoi: â€œParameterization of the nuclear HulthÃ©npotentialsâ€, Physics of Atomic Nuclei, 79(1), 62-66 (2016).
JhasaketanBhoi and UjjwalLaha: â€œNucleon-nucleon potentials and computation of scattering phase shiftsâ€, Indonesian Journal of Applied Physics, Vol-5, number-2, 73-80 (pp 2015).
J. Bhoi and U. Laha: â€œSupersymmetry generated Jost functions and nucleon-nucleon scattering phase shiftsâ€, Physics of Atomic Nuclei, 78(7), 831-834 (2015).
U. Laha and J. Bhoi: â€œTwo-nucleon Hulthen type interactions for few higher partial wavesâ€, Pramana J. of Phys. 84(4), 555-567 (2015).
U. Laha and J. Bhoi: â€œHigher partial wave potentials from supersymmetry-inspired factorization and nucleon-nucleus elastic scatteringâ€, Phys. Rev. C 91(3), 034614 (2015).
JhasaketanBhoi and UjjwalLaha: â€œIntegral Transforms and their applications to scattering theoryâ€, International Journal of Applied Physics and Mathematics, Vol-4, number-6, pp 386-405 (2014).
U. Laha and J. Bhoi: â€œComparative study of the energy dependent and independent two-nucleon interactions-a supersymmetric approachâ€, International Journal of Modern Physics E 20(08),1450039-1 (2014).
Keshab C. Panda, Binod C. Sahu and JhasaketanBhoi: â€œAccuracy of simple folding model in the calculation of the directpart of real alpha-alpha interaction potentialâ€, Pramana J. of Phys. 82(5), 841-849 (2014).
J. Bhoi, U. Laha and K. C. Panda: â€œNucleon-nucleon scattering in the light of supersymmetric quantum mechanicsâ€, Pramana J. of Phys. 82(5), 859-865 (2014).
U. Laha and J. Bhoi: â€œIntegral transform of the Coulomb Greenâ€™s function by the Hankel function and off-shell scatteringâ€, Phys. Rev. C 88(6), 064001 (2013).
U. Laha and J. Bhoi: â€œOn the nucleon-nucleon scattering phase shifts through supersymmetry and factorizationâ€, Pramana J. Phys. Vol. 81, No. 6, December 959â€“973 (2013).
U. Laha and J. Bhoi: â€œAn Integral Transform of Coulomb Greenâ€™s Function via Sturmian Representation and Off-Shell Scatteringâ€, Few-Body System, 54, 1973 (2013).
J. Bhoi and U. Laha: â€œHamiltonian hierarchy and nâ€“p scatteringâ€, J Phys. G: Nucl. & Part. Phys. 40, 045107 (2013).
U. Laha and J. Bhoi: â€œOff-shell Jost solutions for Coulomb and Coulomb-like interactions in all partial wavesâ€, Journal of Math. Phys. 54, 013514 (2013).
U. Laha and J. Bhoi: â€œThermal conductivity of bad conductors revisited, International Journal of Physics and Mathematical Sciencesâ€, Vol. 3 (1) January-March, pp 40-42 (2013).
Das, A., Das, S. R., Panda, A., & Patel, S. K. (2022). Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 236(5), 1889-1905.
Das, A., Padhan, S., & Das, S. R. (2022). Analysis on hole overcut during micro-EDM of Inconel 718. Materials Today: Proceedings, 56, 29-35.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2021). Analysis on surface integrity and sustainability assessment in electrical discharge machining of engineered Al-22% SiC metal matrix composite. Rev Metal, 57(4), e210.
Pradhan, S., Sahu, S., Das, S. R., & Dhupal, D. (2021). Experimental study and simulation of surface generation during machining of K-80 alumina ceramic in modified abrasive jet machining with different temperatures using Al2O3 abrasives. International Journal of Abrasive Technology, 10(4), 298-329.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2020). Experimental investigation on machining of hardstone quartz with modified AJM using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-22.
Panda, A., Das, S. R., Dhupal, D., & Davim, J. P. (2018). Hard turning of HSLA steel with coated ceramic tool based on evaluation of surface roughness, tool wear, chip morphology and economic analysis. Journal of Manufacturing Technology Research, 10(3/4), 113-141.
Panda, A., Das, S. R., & Dhupal, D. (2018). Experimental investigation, modelling and optimization in hard turning of high strength low alloy steel (AISI 4340). Matériaux & Techniques, 106(4), 404.
Das, S. R., Kumar, A., & Dhupal, D. (2015). Surface roughness analysis of hardened steel using TiN coated ceramic inserts. International Journal of Machining and Machinability of Materials, 17(1), 22-38.
Das, A., Padhan, S., Das, S. R., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2021). Performance assessment and chip morphology evaluation of austenitic stainless steel under sustainable machining conditions. Metals, 11(12), 1931.
Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2022). Electrical discharge machining of engineered Al-22% SiC metal matrix composite: surface roughness analysis, optimization, economic analysis, and sustainability assessment. Process Integration and Optimization for Sustainability, 1-29.
Behera, R. K., Samal, B. P., Panigrahi, S. C., Das, S. R., Mohamed, A., Muduli, K., ... & Das, R. (2022). Experimental analysis on machinability aspects of sintered aluminium metal matrix (Al+ Si+ Mg+ Cu+ SiC) composite-a novel product produced by powder metallurgy method. International Journal of Materials Engineering Innovation, 13(1), 1-22.
Das, A., Gautam, A., Panda, A., Das, S. R., Debnath, K., Ramakrishna, C., & Patel, S. K. (2022). Comparative performance evaluation between uncoated and TiAlN+ AlCrN coated carbide tools in hard turning of AISI H11 steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089221110430.
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(2), 1009-1035.
Rout, B., Dash, R., Dhupal, D., & Das, S. R. (2022). Optimized posture prediction for task specific during stacking process using human upper body movements. International Journal on Interactive Design and Manufacturing (IJIDeM), 16(1), 291-303.
Das, A., Kamal, M., Das, S. R., Patel, S. K., Panda, A., Rafighi, M., & Biswal, B. B. (2022). Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(6), 3174-3197.
Padhan, S., Das, S. R., Das, A., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2022). Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials, 15(7), 2368.
Das, A., Gupta, M. K., Das, S. R., Panda, A., Patel, S. K., & Padhan, S. (2022). Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: comparative machinability investigation and sustainability assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(4), 138.
Rafighi, M., Özdemir, M., Das, A., & Das, S. R. (2022). Machinability investigation of cryogenically treated hardened AISI 4140 alloy steel using CBN insert under sustainable finish dry hard turning. Surface Review and Letters, 29(04), 2250047.
Das, A., Mohapatra, S., Gajrani, K. K., Das, S. R., & Patel, S. K. (2022). Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 09544054221111884.
Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., Somani, N., & Gupta, N. K. (2022). Machine Learning-based modeling and optimization in hard turning of AISI D6 steel with advanced AlTiSiN-coated carbide inserts to predict surface roughness and other machining characteristics. Surface Review and Letters, 29(10), 2250137.
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Investigations on surface integrity in hard turning of functionally graded specimen under nano fluid assisted minimum quantity lubrication. Advances in Materials and Processing Technologies, 8(sup3), 1714-1729.
Rafighi, M., Özdemir, M., ?ahino?lu, A., Kumar, R., & Das, S. R. (2022). Experimental assessment and topsis optimization of cutting force, surface roughness, and sound intensity in hard turning of AISI 52100 steel. Surface Review and Letters, 29(11), 2250150.
Babu, M. N., Anandan, V., Parthasarathi, N. L., Yildirim, C. V., Babu, M. D., & Das, S. R. (2022). Performance analysis in turning of D3 tool steel using silver nanoplatelets as additives under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(12), 591.
Ibrahim, A. M. M., Omer, M. A., Das, S. R., Li, W., Alsoufi, M. S., & Elsheikh, A. (2022). Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using vegetable oil enriched with nano-additives. Alexandria Engineering Journal, 61(12), 10925-10938.
Kumar, N., Kumar, A., & Das, S. R. (2023). ELECTROCHEMICAL ARC DRILLING OF NICKEL–TITANIUM SHAPE MEMORY ALLOY USING MOLYBDENUM ELECTRODE: INVESTIGATION, MODELING AND OPTIMIZATION. Surface Review & Letters, 30(8).
Wagri, N. K., Jain, N. K., Petare, A., Das, S. R., Tharwan, M. Y., Alansari, A., ... & Elsheikh, A. (2023). Investigation on the performance of coated carbide tool during dry turning of AISI 4340 alloy steel. Materials, 16(2), 668.
Padhan, S., Wagri, N. K., Dash, L., Das, A., Das, S. R., Rafighi, M., & Sharma, P. (2023). Investigation on surface integrity in hard turning of AISI 4140 steel with SPPP-AlTiSiN coated carbide insert under nano-MQL. Lubricants, 11(2), 49.
Mahapatra, S., Das, A., Jena, P. C., & Das, S. R. (2023). Turning of hardened AISI H13 steel with recently developed S3P-AlTiSiN coated carbide tool using MWCNT mixed nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 237(4), 843-864.
Sharma, P., Soni, H., Sethy, S., Das, S. R., Tharwan, M. Y., Al Sofyani, S., ... & Elsheikh, A. (2023). Surface characterization of SAE 304 after WED cutting: An experimental investigation and optimization. Journal of Materials Research and Technology, 23, 5723-5732.
Mishra, P. C., Roychoudhury, A., Banerjee, A., Saha, N., Das, S. R., & Das, A. (2023). Coated Piston Ring Pack and Cylinder Liner Elastodynamics in Correlation to Piston Subsystem Elastohydrodynamic: Through FEA Modelling. Lubricants, 11(5), 192.
Pittala, R. K., Sharma, P., Anne, G., Patil, S., Varghese, V., Das, S. R., ... & Fernandes, F. (2023). Development and Mechanical Characterization of Ni-Cr Alloy Foam Using Ultrasonic-Assisted Electroplating Coating Technique. Coatings, 13(6), 1002.
Biswal, S., Das, S. R., Saha, N., & Mishra, P. C. (2023). Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environment, Development and Sustainability, 1-32. https://doi.org/10.1007/s10668-023-03752-6
Kumar, N., Kumar, A., Sethy, S., & Das, S. R. (2023). Investigation and optimization in electrochemical arc drilling of Ni55. 7Ti nickel–titanium shape memory alloy with molybdenum electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45(9), 448.
Somani, N., Walia, A. S., Gupta, N. K., Panda, J. P., Das, A., & Das, S. R. (2023). Data driven surrogate model-based optimization of the process parameters in electric discharge machining of D2 steel using Cu-SiC composite tool for the machined surface roughness and the tool wear. Revista de Metalurgia, 59(2), e242-e242.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). ANALYSIS ON POWER CONSUMPTION FOR LIFE CYCLE SUSTAINABILITY ASSESSMENT IN HARD TURNING OF AISI 4140 STEEL USING SPPPâ€” AlTiSiN-COATED CARBIDE TOOL UNDER VARIOUS CUTTING ENVIRONMENTS. Surface Review and Letters (SRL), 31(06), 1-26.
Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Investigation on Surface Roughness and Power Consumption for Sustainability Assessment in Hard Turning of HSLA Steel With SPPP?AlTiSiN–Coated Carbide Tool Under Various Cooling?Lubrications. Lubrication Science. https://doi.org/10.1002/ls.1717
Das, A., Barrenkala, D., Das, S. R., Patel, S. K., Somani, N., & Kumar, C. S. (2024). Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089231223021.
Dhupal, D., Panigrahi, D., Rout, S., Bhuyan, R. K., Nayak, S., Jena, P. C., & Das, S. R. (2024). Generation of effusion holes on ultra-high temperature alloy by micro electro-discharge machining process. Surface Review and Letters, 31(02), 2450015.
Padhan, S., Das, A., & Das, S. R. (2024). Analysis, modelling and optimization on tool vibration in machining of nitronic 60 with SiAlON ceramic tool. Advances in Materials and Processing Technologies, 1-14.
Roy, S., Das, A., Kumar, R., Das, S. R., Rafighi, M., & Sharma, P. (2024). Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on the performance and sustainability assessment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 09544054241229472.
Sethy, S., Rana, J., Sharma, P., & Das, S. R. (2024). Comparative performance investigation and sustainability assessment in electrical discharge machining of SS316 using different dielectrics. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238(7), 2718-2733.
Panda, D., Sahu, S. K., & Das, S. R. (2024). Comparative performance evaluation and economic assessment between traditional and vibration assisted EDM during machining of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 09544062241244949.
Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. (2024). Comparative performance investigation and sustainability evaluation between hot-AJM and AJM during machining of zirconia ceramic using Al2O3 abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46(5), 263.
Das, A., Kumar, A., Padhan, S., Das, S. R., Satpathy, M. P., & Patel, S. K. (2024). Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: comparative machining performance evaluation and economic assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46(5), 277.
Sethy, S., Das, S. R., Rana, J., Behera, A. K., & Gupta, M. K. (2024). Performance evaluation and economic assessment in electrical discharge machining of SS316 using graphite powder dispersed in biodegradable palm oil dielectric. Surface Review and Letters, 2450120.
Sarangi, S., Behera, A. K., Bajpai, S., Sahoo, S., Sethy, S., & Das, S. R. (2024). Application of tri-vector analysis to identify the optimum coating thickness in induced draft fans. Surface Review and Letters. https://doi.org/10.1142/S0218625X24501336
Parida, S. P., Mishra, D., Padhy, R. L., Jena, P. C., Das, S. R., Basem, A. A., ... & Elsheikh, A. (2024). Effect of Alkali Treatment on Mechanical and Buckling Behaviour of Natural Fiber Reinforced Composite Cylinder. ES Materials & Manufacturing, 24, 1161.
Parida, S. P., Jena, P. C., Das, S. R., Basem, A., Khatua, A. K., & Elsheikh, A. H. (2024). Transverse vibration of laminated-composite-plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 09544062241256589.
Elsheikh, A. H., Abd Elaziz, M., Das, S. R., Muthuramalingam, T., & Lu, S. (2021). A new optimized predictive model based on political optimizer for eco-friendly MQL-turning of AISI 4340 alloy with nano-lubricants. Journal of Manufacturing Processes, 67, 562-578.
Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Investigations on surface integrity in hard turning of functionally graded specimen under nano fluid assisted minimum quantity lubrication. Advances in Materials and Processing Technologies, 8(sup3), 1714-1729.
Parida, S. P., Jena, P. C., Das, S. R., Dhupal, D., & Dash, R. R. (2022). Comparative stress analysis of different suitable biomaterials for artificial hip joint and femur bone using finite element simulation. Advances in Materials and Processing Technologies, 8(sup3), 1741-1756.
Lalatendu Dash, Smita Padhan, Anshuman Das, Sudhansu Ranjan Das, “Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, doi:10.1177/0954406221993844 (2021). SCIE
Behera, R. K., Samal, B. P., Panigrahi, S. C., & Das, S. R. (2021). Optimization of erosion wears of Al–Mg–Si–Cu–SiC composite produced by the PM method. Corrosion Reviews, 39(1), 63-75.
Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2021). Machining of hardstone quartz with modified AJM process using hot SiC abrasives: analysis, modeling, optimization, and cost analysis. Surface Review and Letters, 28(02), 2050049.
Dash, L., Padhan, S., & Das, S. R. (2020). Design optimization for analysis of surface integrity and chip morphology in hard turning. Structural Engineering and Mechanics, An Int'l Journal, 76(5), 561-578.
Dash, L., Padhan, S., & Das, S. R. (2020). Experimental investigations on surface integrity and chip morphology in hard tuning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42(10), 500.
Pradhan, S., Das, S. R., & Dhupal, D. (2021). Performance evaluation of recently developed new process HAJM during machining hardstone quartz using hot silicon carbide abrasives: an experimental investigation and sustainability assessment. Silicon, 13(9), 2895-2919.
Padhan, S., Dash, L., Behera, S. K., & Das, S. R. (2020). Modeling and optimization of power consumption for economic analysis, energy-saving carbon footprint analysis, and sustainability assessment in finish hard turning under graphene nanoparticle–assisted minimum quantity lubrication. Process Integration and Optimization for Sustainability, 4, 445-463.
Naik, S., Das, S. R., & Dhupal, D. (2020). Analysis, predictive modelling and multi-response optimization in electrical discharge machining of Al-22% SiC metal matrix composite for minimization of surface roughness and hole overcut. Manufacturing Review, 7, 20.
Naik, S., Das, S. R., & Dhupal, D. (2021). Experimental investigation, predictive modeling, parametric optimization and cost analysis in electrical discharge machining of Al-SiC metal matrix composite. Silicon, 13, 1017-1040.
Panda, A., Das, S. R., & Dhupal, D. (2020). Machinability investigation and sustainability assessment in FDHT with coated ceramic tool. Steel and Composite Structures, An International Journal, 34(5), 681-698.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts. Mechanics & Industry, 21(1), 110.
Padhan, S., Das, A., Santoshwar, A., Dharmendrabhai, T. R., & Das, S. R. (2021). Sustainability assessment and machinability investigation of austenitic stainless steel in finish turning with advanced ultra-hard SiAlON ceramic tool under different cutting environments. Silicon, 13, 119-147.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2020). Performance evaluation of aluminium oxide nano particles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. Scientia Iranica, 27(6), 2838-2852.
Pradhan, S., Dhupal, D., Das, S. R., & Jena, P. C. (2021). Experimental investigation and optimization on machined surface of Si3N4 ceramic using hot SiC abrasive in HAJM. Materials Today: Proceedings, 44, 1877-1887.
Pradhan, S., Tripathy, S. S., Sahu, S., Das, S. R., Jena, P. C., & Dhupal, D. (2020). Investigation on MRR and DOC of the micro-holes generated on quartz using silicon carbide by FB-HAJM. Materials Today: Proceedings, 26, 2005-2012.
Behera, R. K., & Das, S. R. (2019). Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic. Matériaux & Techniques, 107(6), 603.
Das, A., Pradhan, O., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). Performance appraisal of various nanofluids during hard machining of AISI 4340 steel. Journal of Manufacturing Processes, 46, 248-270.
Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel. Machining Science and Technology, 24(2), 291-320.
Das, A., Patel, S. K., & Das, S. R. (2019). Performance comparison of vegetable oil based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication. Mechanics & Industry, 20(5), 506.
Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryo treated cermet inserts. Journal of Superhard Materials, 41, 247-264.
Panda, A., Ranjan Das, S., & Dhupal, D. (2019). Machinability investigation of HSLA steel in hard turning with coated ceramic tool: assessment, modeling, optimization and economic aspects. Journal of Advanced Manufacturing Systems, 18(04), 625-655.
Das, A., Tirkey, N., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). A comparison of machinability in hard turning of EN-24 alloy steel under mist cooled and dry cutting environments with a coated cermet tool. Journal of Failure Analysis and Prevention, 19, 115-130.
Dixit, S. R., Das, S. R., & Dhupal, D. (2019). Parametric optimization of Nd: YAG laser microgrooving on aluminum oxide using integrated RSM-ANN-GA approach. Journal of Industrial Engineering International, 15, 333-349.
Anand, A., Behera, A. K., & Das, S. R. (2019). An overview on economic machining of hardened steels by hard turning and its process variables. Manufacturing Review, 6, 4.
DHUPAL, D., DIXIT, S. R., & DAS, S. R. (2018). Optimization of process parameters in laser microgrooving of alumina ceramic using genetic algorithm. UPB Sci. Bull., 80, 163-178.
Dhupal, D., Mohanty, S., Dixit, S. R., Das, S. R., & Nanda, B. K. (2018). Micromachining on Al-SiC based metal matrix composite using DPSS laser. Materials Today: Proceedings, 5(5), 11304-11318.
Dhupal, D., Naik, S., & Das, S. R. (2018). Modelling and optimization of Al–SiC MMC through EDM process using copper and brass electrodes. Materials Today: Proceedings, 5(5), 11295-11303.
Das, S. R., Panda, A., & Dhupal, D. (2018). Hard turning of AISI 4340 steel using coated carbide insert: Surface roughness, tool wear, chip morphology and cost estimation. Materials Today: Proceedings, 5(2), 6560-6569.
Nanda, B. K., Dhupal, D., Buda, D., & Das, S. R. (2018). Abrasive jet drilling of alumina ceramic with pressurized-fluidized bed set-up. Materials Today: Proceedings, 5(5), 12570-12578.
Panda, A., Das, S. R., & Dhupal, D. (2017). Surface roughness analysis for economical feasibility study of coated ceramic tool in hard turning operation. Process Integration and Optimization for Sustainability, 1, 237-249.
Das, S. R., Panda, A., & Dhupal, D. (2017). Experimental investigation of surface roughness, flank wear, chip morphology and cost estimation during machining of hardened AISI 4340 steel with coated carbide insert. Mechanics of Advanced Materials and Modern Processes, 3, 1-14.
Das, S. R., Kumar, A., & Dhupal, D. (2016). Experimental investigation on cutting force and surface roughness in machining of hardened AISI 52100 steel using cBN tool. International Journal of Machining and Machinability of Materials, 18(5-6), 501-521.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts. Journal of Mechanical Science and Technology, 29, 4329-4340.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108-126.
01
04
Ranjan, R., Surekha, B., Ghose, P., Mishra, P.C. Regression model based properties prediction of A356 aluminum alloy rheocast using cooling slope technique. Discov Appl Sci 6, 90 (2024). IF: 2.6 (SCIE), ISSN: 3004-9261, https://doi.org/10.1007/s42452-024-05720-9.
Biswal, S., Das, S.R., Saha, N., Mishra, P.C. Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environ Dev Sustain 26, 26753–26784 (2024). IF: 4.7 (SCI), ISSN: 1573-2975, https://doi.org/10.1007/s10668-023-03752-6.
Pradhan SK, Gupta A, Mishra PC. Investigating into the Effects of Bore Irregularities on the Hydrodynamic Performance Journal Bearing Using Response Surface Methodology. Tribology in Industry, Volume 45, No 2, 2023, Pages 201-211, IF: (SCOPUS), ISSN: 0354-8996, DOI: 10.24874/ti.1431.01.23.03.
Mishra, P.C.; Roychoudhury, A.; Banerjee, A.; Saha, N.; Das, S.R.; Das, A. Coated Piston Ring Pack and Cylinder Liner Elastodynamics in Correlation to Piston Subsystem Elastohydrodynamic: Through FEA Modelling. Lubricants 2023, 11, 192. IF: 3.1 (SCIE), ISSN: 2075-4442, https://doi.org/10.3390/lubricants11050192.
Saha, N.; Mishra, P.C. Modified Whale Algorithm-Based Optimization for Fractional Order Concurrent Diminution of Torque Ripple in Switch Reluctance Motor for EV Applications. Processes 2023, 11, 1226. IF: 2.8 (SCIE), ISSN: 2227-9717, https://doi.org/10.3390/pr11041226.
Saha, N.; Mishra, P.C. A Multi-Objective Hybrid BESSA Optimization Scheme for Parameter Extraction from PV Modules. Appl. Sci. 2023, 13, 4705. IF: 2.5 (SCIE), ISSN: 2076-3417, https://doi.org/10.3390/app13084705.
Biswal, S.; Mishra, P.C. Piston Compression Ring Elastodynamics and Ring–Liner Elastohydrodynamic Lubrication Correlation Analysis. Lubricants 2022, 10, 356. IF: 3.1 (SCIE), ISSN: 2075-4442, https://doi.org/10.3390/lubricants10120356.
Pradhan, S.K.; Kumar, R.; Mishra, P.C. Grey-Fuzzy Hybrid Optimization for Thermohydrodynamic Performance Prediction of Misaligned Rough Elliptic Bore Journal Bearing. Lubricants 2022, 10, 274. IF: 3.1 (SCIE), ISSN: 2075-4442, https://doi.org/10.3390/lubricants10100274.
Mishra, P.C.; Gupta, A.; Samanta, S.; Ishaq, R.B.; Khoshnaw, F. Framework for Energy-Averaged Emission Mitigation Technique Adopting Gasoline-Methanol Blend Replacement and Piston Design Exchange. Energies 2022, 15, 7188. IF: 3.0 (SCIE), ISSN: 1996-1073, https://doi.org/10.3390/en15197188.
Pradhan, S.K.; Kumar, R.; Mishra, P.C. Computer Simulation and Optimization Elliptic Bore Journal Bearing, Tribology in Industry, 44(1):322-333 2022, IF: (SCOPUS), ISSN: 0354-8996, DOI:10.24874/ti.1179.09.21.01.
Mishra, PC, Ishaq, R. and Khoshnaw, F. (2020) Mitigation Strategy of Carbon Dioxide Emissions through Multiple Muffler design exchange and Gasoline-Methanol blend replacement. Journal of Cleaner production, ELSEVIER,286, 125460. IF:11.072(SCI), ISSN: 0959-6526, https://doi.org/10.1016/j.jclepro.2020.125460.
Roychoudhury A, Banerjee A, Mishra PC, Khoshnaw F (2020) An FEA Material Strength Modelling of a Coated Engine Piston. Materials Today: Proceedings: ELSEVIER. 44(1), pp.1320-1325. IF: (SCOPUS), ISSN: 2214-7853, https://doi.org/10.1016/j.matpr.2020.11.387.
14. Pradhan SK, Kumar R, Mishra PC (2020). Material Modeling and Optimization of Rough Elliptic bore Journal bearing. Materials Today: Proceedings: ELSEVIER. 44(1), pp.1021-1027. IF: (SCOPUS), ISSN: 2214-7853, https://doi.org/10.1016/j.matpr.2020.11.174.
Gupta,A., Mishra, P.C.(2020) Methanol and petrol blended alternate fuel for future sustainable engine: A performance and emission analysis. Measurement, 155. https://doi.org/10.1016/j.measurement.2020.107519Â Â (IF -2.826)
Mishra PC (2020) Thermal Modeling of Thin Lubricant Film Within Piston Compression Ring and Rough Cyliner Liner Conjuction. Front. Mech. Eng. 5:68. doi:10.3389/fmech.2019.00068
Sahu, P., Mishra, P.C. Combine experimental and FEM analysis of adhesive bonded single lap joint with Al-alloy flat adherends and pre-embedded artificial defects. SN Appl. Sci. 1, 1455 (2019). https://doi.org/10.1007/s42452-019-1535-8
Gupta,A., Mishra, P.C.(2019) Optimization of emission characteristics of spark ignition engine with chambered straight muffler running in methanol blend:An engine development technique for environmental sustainability. Journal of Cleaner Production, 238. https://doi.org/10.1016/j.jclepro.2019.117778 (IF -7.051)
Mishra PC and Kumar S (2019) Modeling for Design Optimization of Piston Crown Geometry Through Structural Strength and Lubrication Performance Correlation Analysis. Front. Mech. Eng. 5:17. doi: 10.3389/fmech.2019.00017 (IF -***) .
Mishra, P.C., Kar, S., Mishra, H.(2018) “Effect of perforation on exhaust performance of a turbo pipe type muffler using methanol and gasoline blended fuel: A step to NOx control” Journal of Cleaner Production, 183,869-879.https://doi.org/10.1016/j.jclepro.2018.02.236 Â (IF -7.051)
Gupta A. and Mishra P.C. (2017) “Emission and Friction Analysis of IC engine running in Methanol Blend” Oxidation Communications, Â 41(1) (IF -0.48)
Mishra P.C. (2017) “Computational Fluid Dynamics Model for Geometric Optimisation of Reflective Sound Cancellation Type Exhaust Muffler, Journal of Balkan Tribological Association,4(1310-4772):592 (IF -0.737)
Kumar S. and Mishra P.C. (2016) “ Finite element modeling for structural strength of quadcoptor type multi-mode vehicle” Aerospace Science and Technology 53, pp.252-266. https://doi.org/10.1016/j.ast.2016.03.020 (IF -3.001)
Mishra P.C., Kar S, Mishra H, Gupta A (2016) Modeling for combined effect of muffler geometry modification and blended fuel use on exhaust performance of a four stroke engine: A Computational Fluid Dynamics approach” Applied Thermal Engineering ,108(5), pp.1105-1118. DOI: 10.1016/j.applthermaleng.2016.08.00Â Â (IF -4.026)
Mishra P.C. (2014) â€œModeling for route cause of engine friction loss: Transient elastohydrodynamics of piston compression ring and cylinder liner lubricated contactâ€Applied Mathematical Modeling, 37(8), pp.5896-5912. https://doi.org/10.1016/j.apm.2014.10.011Â (IF -3.112)
Mishra P.C.(2012) “Mathematical modeling of stability in rough elliptic bore misaligned journal bearing considering thermal and non-Newtonian effects”Applied Mathematical Modeling, 37(8), pp.5896-5912. https://doi.org/10.1016/j.apm.2012.11.020 (IF -3.112)
Mishra, P. C.(2012) “Tribodynamic modeling of piston compression ring and cylinder liner conjunction in high pressure zone of engine cycle” International Journal of Advanced Manufacturing Technology: 66(5-8), pp. 1075-1085.DOI:10.1007/s00170-012-4390-y(IF -2.75)
Mishra, P. C.,Rahnejat, H. and King, P.D., (2009) “Tribology of ring-bore conjuction subjected to mixed regime of lubrication” IMechE, Part.C, Journal of Mech.Engg.Sc., 223,pp.987-998. DOI: 10.1243/09544062JMES1220.(IF -1.359)
Mishra, P. C., Rahnejat, H. and Balakrishnan, S., (2008) “Tribology of Piston compression ring and cylinder contact at reversal” IMechE, Part.J,Engineering Tribology, 222(7), pp.815-826. DOI: 10.1243/13506501JET410 (IF -1.137)
Mishra, P. C., (2007) â€œThermal Analysis of Elliptic Bore Journal Bearingâ€Tribology Transaction STLE, 50, pp 137-144.DOI:10.1080/10402000601105573.(IF -1.723)
Mishra, P. C.,Pandey, R.K., Athre, K., (2006)''Temperature Profile of an Elliptic Bore Journal Bearing’’, Tribology International: ELSEVIER, 40, 2007, pp 453- 458.DOI: http://dx.doi.org/10.1016/j.triboint.2006.04.009. (IF -3.517)
Mishra P.C. (2011) “Thermal analysis of elliptic bore journal bearing considering shaft misalignment” Tribology Online, Japanese Societies of Tribologists, 6 (5), 239-246. DOI:http://dx.doi.org/10.2474/trol.6.239Â
Mishra P.C. (2014) “Effect of surface forces on Ultra thin film lubrication” ISRN Tribology: Hindawi:. http://dx.doi.org/10.1155/2014/612195
Mishra P.C.(2013) “Modeling for friction of four stroke four cylinder petrol engine”Tribology in Industry, 35(3), pp.237-245.(SNIP-1.44)
Mishra P.C.(2014) “Analysis of a rough elliptic bore journal bearing using expectancy model of roughness characterization”Tribology in Industry, 36(2), pp.211-219.(SNIP-1.44)
Mishra P.C.(2012) “Isothermal analysis of elliptic bore journal bearing considering isotropic roughness”International Journal of Mechanical & Mechatronics Engineering, 12(4), pp.24-31.(SNIP-1.44)
Mishra P.C.(2014) “A review on piston compression ring tribology”Tribology in Industry, 36(3), pp.269-280.(SNIP-1.44)
Mishra P.C.(2015) “FEM analysis for coating strength of a piston compression ring in contact with cylinder line: A Tribodynamic analysis”Tribology in Industry, 37(1), pp.42-54.(SNIP-1.44)
Gupta A. and Mishra P.C. (2017) “Emission and Friction Analysis of IC Engine Running in Methanol Blend” Tribology in Industry , https://doi.org/10.24874/ti.2018.40.01.02 Â Â (SNIP -1.44)
Padhy, R.L., Parida, S.P., Mishra, D., Jena Pankaj Charan,. Study of damage progression due to impact of solid bodies on laminated composite plates in water. Int J Interact Des Manuf (2024). https://doi.org/10.1007/s12008-024-02128-y
Sarada Prasad Parida, Pankaj Charan Jena*, Sudhansu Ranjan Das , Ali Basem, Ajit Kumar Khatua and Ammar H Elsheikh, Transverse vibration of laminated composite-plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory, Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science, 2024, https://doi.org/DOI: 10.1177/09544062241256589
Sarada Prasad Parida, Pankaj Charan Jena*, Mukul Swain, Krushna Prasad Shadangi*, Fabrication of Geopolymer Composites using Egg-Shell and Fly-ash: Comparison between the Strength and Stability, Physio-Chemical and Mechanical Properties, Process Safety and Environmental Protection 187 (2024) 1140–1149, https://doi.org/10.1016/j.psep.2024.05.020
Sarada Prasad Parida, Debashish Mishra, Rajiv Lochan Padhy, Pankaj Charan Jena,* Sudhansu Ranjan Das, Ali A. Basem, Debabrata Dhupal and Ammar Elsheikh, Effect of Alkali Treatment on Mechanical and Buckling Behaviour of Natural Fiber Reinforced Composite Cylinder, ES Materials and Manufacturing, 24, 1161, 1-11, 2024, https://dx.doi.org/10.30919/esmm1161
Sarada Prasad Parida, Saritprava Sahoo, Pankaj Charan Jena, Prediction of multiple transverse cracks in a composite beam using hybrid RNN-mPSO technique, Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science, 2024, https://doi.org/DOI: 10.1177/09544062241239415
Saritprava Sahoo,Sarada Prasad Parida, Pankaj Charan Jena, Dynamic response of a laminated hybrid composite cantilever beam with multiple cracks & moving mass, Structural Engineering and Mechanics,87(6),529-540, 2023,https://doi.org/10.12989/sem.2023.87.6.529 SCOPUS SCI-IF: 2.2
Debabrata Dhupal, Debasish Panigrahi, Sweta Rout, Rajesh Kumar Bhuyan, Soumyaranjan Nayak, Pankaj Charan Jena, and Sudhansu Ranjan Das, Generation of Effusion Holes on Ultra-high Temperature Alloy by Micro Electro-discharge Machining Process, Surface Review and Letters, 2023, https://doi.org/10.1142/S0218625X2450015X , SCOPUS SCI-IF: 1.1
Saritprava Sahoo, Pankaj Charan Jena, Effect of lamina orientation, crack severity, and fillers on dynamic parameters of hybrid composite cantilever beam with double transverse cracks, Materialwissenschaft und Werkstofftechnik,Vol.54(4), Pages: 737-750, DOI: 10.1002/mawe.202200205, SCOPUS, SCI-IF: 1.034
Sarada Prasad Parida, Pankaj Charan Jena, Dynamics of laminated-composite-plates with selective layer-wise fillering rested on elastic foundation using higher-order layer-wise theory Journal of Vibration and Control, 2022,https://doi.org/10.1177/10775463221138353, SCOPUS, SCI-IF: 2.8
Sarada Prasad Parida, Pankaj Charan Jena, Multi-fillers GFRP laminated composite plates: Fabrication & Properties, Indian Journal of Engineering and Materials Sciences, Vol. December 2022,pp. 815-823 DOI: 10.56042/ijems.v29i6.70296 SCOPUS, SCI-IF: 0.615
Sarada Prasad Parida, Pankaj Charan Jena, Multi-fillers GFRP laminated composite plates: Fabrication & Properties, Indian Journal of Engineering and Materials Sciences, in Press, December 2022, SCOPUS, SCI-IF: 0.88
Sarada Prasad Parida, Pankaj Charan Jena, Dynamics of laminated-composite-plates with selective layer-wise fillering rested on elastic foundation using higher-order layer-wise theory Journal of Vibration and Control, Journal of Vibration and Control, 2022, DOI: 10.1177/10775463221138353, SCOPUS, SCI-IF: 3.095
Sitesh Mahapatra, Anshuman Das, Pankaj Charan Jena and Sudhansu Ranjan Das, Turning of hardened AISI H13 steel with recently developed S3P-AlTiSiN coated carbide tool using MWCNT mixed nanofluid under minimum quantity lubrication Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science, 2022, https://doi.org/10.1177/09544062221126357 SCOPUS, SCI-IF: 1.762
Sarada Prasad Parida, Pankaj Charan Jena, Selective layer-by-layer fillering and its effect on the dynamic response of laminated composite plates using higher-order theory, Journal of Vibration and Control, 2022. https://doi.org/10.1177%2F10775463221081180, SCOPUS, SCI-IF: 3.095
Sarada Prasad Parida, Pankaj Charan Jena, Free and forced vibration analysis of flyash/graphene filled laminated composite plates using higher order shear deformation theory, Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science, 2022, https://doi.org/10.1177%2F09544062211053181 SCOPUS, SCI-IF: 1.762
Saritprava Sahoo, Pankaj Charan Jena, Preparation and Characterization of Hybrid Laminated Composite Beams, Advances in Materials and Processing Technologies, 2021, DOI:10.1080/2374068X.2021.1953924 SCOPUS, ESCI.
Sarada Prasad Parida, Pankaj Charan Jena, Comparative Stress analysis of different suitable Biomaterials for Artificial Hip Joint and Femur Bone using Finite Element Simulation, Advances in Materials and Processing Technologies, 2021, DOI:10.1080/2374068X.2021.1949541 SCOPUS, ESCI.
Subhadip Pradhan, Sudhansu Ranjan Das, Pankaj Charan Jena, Debabrata Dhupal Investigations on Surface Integrity in Hard Turning of Functionally Graded Specimen under Nano Fluid Assisted Minimum Quantity Lubrication, Advances in Materials and Processing Technologies, 2021, DOI:10.1080/2374068X.2021.1948706 SCOPUS, ESCI.
Saurav Kumar Bhatt, Pankaj Charan Jena, Anish Pandey, Dayal R. Parhi, Design and Analysis of a Novel Concept-Based Six-Wheels Rocker-Bogie Robot, Journal of Huazhong University of Science and Technology, Vol.50(4), 1-20, 2021 SCOPUS
Pradhan, S., Das, S.R., Jena, P.C., Dhupal, D., Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach, Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science 0(0) 1â€“27, 2021, DOI: 10.1177/09544062211010199 SCOPUS, SCI-IF: 1.762.
Pradhan, S., Das, S.R., Nanda, B.K., Jena, P.C., Dhupal, D., Experimental investigation on machining of hardstone quartz with modified AJM using hot silicon carbide abrasives, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol.42, No.11, 559, 2020, SCIE-IF: 2.220.
Pradhan, S., Das, S.R., Nanda, B.K., Jena, P.C., Dhupal, D.,Machining of Hard stone Quartz With Modified AJM Process using Hot SiC Abrasives: Analysis, Modeling, Optimization, and Cost Analysis, Surface Review And Letters, 2020, 2050049 SCIE-IF: 1.152.
Sarada Prasad Parida, Pankaj Charan Jena*, â€œAdvances of Shear Deformation Theory for Analyzing the Dynamics of Laminated Composite Plates: An Overviewâ€, Mechanics of Composite Materials, Vol. 56, No. 4, 455â€“484, 2020. SCIE-IF: 1.33.
Sarmila Singh, Sarada Prasad Parida, Premananda Ekka, Pankaj Charan Jena*, â€œCharacterization of Fabricated FG Pipe with Natural Fiber-Flyash-Epoxy using Centrifugal Castingâ€, International Journal of Innovative Technology and Exploring Engineering, Volume-8(11), PP., 2019, DOI: 10.35940/ijitee.J9831.0881019, SCOPUS.
Pankaj Charan Jena, Dayal R. Parhi and G. Pohit, â€œDynamic Investigation of FRP Cracked Beam Using Neural Network Techniqueâ€, Journal of Vibration Engineering & Technologies ,ISSN-2321-3558, Volume 7, 2019; 7: 647â€“661. DOI: 10.1007/s42417-019-00158-5. SCIE-IF: 1.889.
Sarada Prasad Parida, Pankaj Charan Jena, â€œDesign and Finite Element analysis of Thick walled Laminated Composite Pressure Vesselâ€, International Journal of Innovative Technology and Exploring Engineering, Volume-8 (10), PP.4389-4394, 2019, DOI: 10.35940/ijitee.J9831.0881019, ISSN: 2278-3075. SCOPUS.
Sarada P. Parida, Pankaj Charan Jena, R. R. Dash,, â€œDynamic analysis of laminated composite beam using Timoshenko beam Theoryâ€,International Journal of Engineering and Advanced Technology, Volume-8 Issue-6, PP.190-196, 2019, ISSN: 2249 â€“ 8958., DOI: 10.35940/ijeat.E7159.088619. SCOPUS.
Sarada Prasad Parida, Saritprava Sahoo, Basna Bidisha Bal, Pankaj Charan Jena, â€œBuckling analysis of Functionally Graded Natural Fiber-Flyash-Epoxy (FGNFFE) Cylinderâ€, International Journal of Engineering and Advanced Technology ISSN: 2249 â€“ 8958,Volume-8 (6), PP.4260-4265, 2019, DOI: 10.35940/ijeat.F9118.088619. SCOPUS.
Pranav Kumar Saraswat, SaritpravaSahoo, Sarada Prasad Parida, Pankaj Charan Jena, â€œFabrication, Characterization and Drilling Operation of Natural Fiber Reinforced Hybrid Composite With Filler (Fly-Ash/Graphene)â€, International Journal of Innovative Technology and Exploring Engineering, ISSN: 2278-3075, Volume-8 (10), PP.1653-1659, 2019, DOI: 10.35940/ijitee.J1253.0881019, SCOPUS.
Pankaj Charan Jena, â€œMechanical Properties of Fabricated CFRP with Fillerâ€, International Journal of Engineering and Advanced Technology ISSN: 2249â€“8958, Volume-8 (6), PP.1886-1892, 2019, DOI: 10.35940/ijeat.E7166.088619. SCOPUS.
S. Kayal, RabindraBehera, Pankaj Charan Jena, â€œSolidifying behavior and Characterization of Al (LM6) +SICP Metal Matrix Compositesâ€, International Journal of Engineering and Advanced Technology ISSN: 2249 â€“ 8958, Volume-8 (6), PP.2397-2403, 2019.DOI: 10.35940/ijeat.F8527.088619, SCOPUS.
Pankaj Charan Jena, Dayal R. Parhi and G. Pohit, â€œFault Measurement in Composite Structure by Fuzzy-Neuro Hybrid Technique from the Natural Frequency and Fibre Orientationâ€, Journal of Vibration Engineering & Technologies, Vol. 5(2), PP.124-36, 2017, DOI: 10.1007/s42417-019-00158-5, SCOPUS, SCIE-IF:1.889
Pankaj Charan Jena, Dayal R. Parhi and G. Pohit, â€œDynamic Study of Composite Cracked Beam by Changing the Angle of Bidirectional Fibresâ€, Iranian Journal of Science and Technology, Transactions A: Science, Vol.40(1):PP.27-37, 2016, DOI 10.1007/s40995-016-0006-yISSN 1028-6276. SCOPUS, SCIE-IF:1.194
Pankaj Charan Jena, Dayal R. Parhi and G. Pohit, â€œTheoretical, Numerical (FEM) and Experimental Analysis of composite cracked beams of different boundary conditions using vibration mode shape curvaturesâ€, International Journal of Engineering and Technology, ISSN : 0975-4024, Vol. 6 No 2, PP.509-518, 2014.SCOPUS
Pankaj Charan Jena, N.Biswal, and R. P.Mohanty, An art of review on dynamic Behavior of sic particulate reinforced polymer composite Beams, International Journal of Engineering Sciences & Research Technology, Vol.5.3, 30-33, 2016.
Pankaj Charan Jena, N.Biswal, and R. P.Mohanty, Dynamic behavior of SiC particulate reinforced polymer composite beam, International Journal of Multidisciplinary Research and Development, Volume 3; Issue 4; 117-124, 2016.
Shakti P.Jena, Dayal R.Parhi, and Pankaj Charan Jena, Dynamic Response of Damaged Cantilever Beam Subjected to Traversing Mass, International Journal for Technological Research In Engineering (IJTRE) 2(7), 860-865, 2015.
Pankaj Charan Jena, Dayal R. Parhi, and G. Pohit,Faults Recognition of a Single Cracked Beam with Analytical and Experimental Methods by using Vibration Signatures. International Journal of Applied Artificial Intelligence in Engineering System, 6(1), 63-76, 2014.
Pankaj Charan Jena, Dayal R. Parhi, and G. Pohit, A Review on Various Techniques and Methodologies Applied to the Study on Faults Detection of Cracked Composite and Non-composite Beam, International Journal of Artificial Intelligence and Computational Research, 6 .1, 69-75, 2014.
Pankaj Charan Jena, Dayal R. Parhi, and G. Pohit,Faults detection of a single cracked beam by theoretical and experimental analysis using vibration signatures, Journal of Mechanical and Civil Engineering, 4.3,1-18, 2012.
Pankaj Charan Jena, Dayal R. Parhi, and G. Pohit,Study about of Faults Detection of a Single Cracked Beam Through Various Techniques, International Journal of Applied Artificial Intelligence in Engineering System, 4.1, 51-58, 2012.
ThrinadhJadam, Santosh Kumar Sahu, SauravDatta, ManojMasanta (2020)Powder-mixed electro-discharge machining performance of Inconel 718: effect of concentration of multi-walled carbon nanotube added to the dielectric media, Indian Academic of Sciences, Shadhana, 45(135), 1-16, Springer.DOI.10.1007/s12046-020-01378-2.
ThrinadhJadam, Santosh Kumar Sahu, SauravDatta, ManojMasanta (2019) EDM performance of Inconel 718 superalloy: application of multi-walled carbon nanotube (MWCNT) added dielectric media, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41(8), 305-324. Springer Berlin Heidelberg. DOI: 10.1007/s40430-019-1813-9.
DebashishSahu, Santosh Kumar Sahu, ThrinadhJadam, SauravDatta (2019)Electroâ€Discharge Machining Performance of Nimonic 80A: An Experimental Observation,Arabian Journal for Science and Engineering, 44, 10155â€“10167.Springer Berlin Heidelberg. DOI: 10.1007/s13369-019-04112-1.
Santosh Kumar Sahu, SauravDatta (2018) Experimental Studies on Graphite Powder Mixed Electro-Discharge Machining of Inconel 718 Super Alloys: Comparison with Conventional EDM, Proceedings of the iMeche, Part E: Journal of Process Mechanical Engineering. SAGE. DOI: 10.1177/0954408918787104.
Santosh Kumar Sahu, ThrinadhJadam, SauravDatta, Goutam Nandi (2018) Effect of using SiC powder-added dielectric media during electro discharge machining of Inconel 718 super alloys, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40(7), 330-349. Springer Berlin Heidelberg. DOI:10.1007/s40430-018-1257-7
Santosh Kumar Sahu, SauravDatta,SarojKumar Patel, SibaSankarMahapatra, (2015) Appraisement and Benchmarking of Supply Chain Performance Extent: A Fuzzy Grey Relation Method, Grey Systems, Theory and Application, 5(1), 2-30, Emerald Group Publishing Limited, UK. DOI:10.1108/GS-10-2014-0036
AnoopKumar Sahoo, Santosh Kumar Sahu, SauravDatta, SibaSankarMahapatra, (2015) Supply Chain flexibility assessment and decision-making: a fuzzyintelligentapproach, International Journal of Business Excellence, 8(6):675-699, IndersciencePublishers, Switzerland. DOI: 10.1504/IJBEX.2015.072305
Santosh Kumar Sahu, SauravDatta, SarojKumar Patel, SibaSankarMahapatra, (2013) Supply Chain Performance Appraisement, Benchmarking and Decision-Making: Empirical StudyusingGrey Theory and Grey-MOORA, International Journal of Process Management and Benchmarking,3(3):233-289, IndersciencePublishers, Switzerland. DOI: 10.1504/IJPMB.2013.058155
ChhabiRam Matawale, SoumyaPanigrahi, Santosh Kumar Sahu, SauravDattaand SibaSankarMahapatra, (2014) Fuzzy-TOPSIS for Appropriate Site Selection for Establishing aThermalPower Plant, Applied MechanicsandMaterials,619:385-389.TransTechPublications, Switzerland. DOI: 10.4028/ www.scientific.net/AMM.619.385.
Santosh Kumar Sahu, SauravDatta, SarojKumar Patel, SibaSankarMahapatra, (2013) Supply Chain Performance Appraisement Platform: Exploration of Interval-Valued Fuzzy Sets Theory, International Journal of Mechanical Engineering Research, 3(2):108-112. Research India Publications, New Delhi.
Santosh Kumar Sahu, SauravDatta, SarojKumar Patel, SibaSankarMahapatra, (2013) Supply Chain performance appraisement Platform in Fuzzy Context, International Journal of Information &ComputationTechnology,3(1):74-77. International Research Publication House, NewDelhi.
Santosh Kumar Sahu, SauravDatta, SarojKumar Patel, SibaSankarMahapatra, (2013) Decision-making scenario towards supply chain performance Assessment in Fuzzy Context, International Journal of Engineering Research and Technology, 6(4):541-556. International Research Publication House, New Delhi.ISSN 0974-3154
Santosh Kumar Sahu, SauravDatta, SarojKumar Patel, and SibaSankarMahapatra, (2013) Industrial Supply Chain Performance Benchmarking using Fuzzy Grey Relation Method, Global Journal of Management and Business Studies,3(7):775-784,ResearchIndiaPublications, NewDelhi.ISSN 2248-9878
Arup GourabSahoo, Santosh Kumar Sahu, ChhabiRam Matawale, SauravDattaand SibaSankarMahapatra, (2014) A Fuzzy Based Decision Support Framework Towards Benchmarking of Enterprise (SupplyChain) Agility: AnEmpiricalResearch, International Journal of Management and International Business Studies, 4(2), 149-158.Research India Publications, NewDelhi. ISSN 2277-3177
Aditya, Santosh Kumar Sahu, AnoopKumar Sahu, SauravDatta, SibaSankarMahapatra, (2014) A decision Support System towards Suppliersâ€™ SelectioninResilient Supply Chain: Exploration of Fuzzy- TOPSIS, International Journal of Management and International Business Studies, 4(2), 149-158. Research India Publications, New Delhi. ISSN 2277-3177
A. K. Mishra, S. Mohapatra, P. K Sahu, “Adaptive Tasmanian Devil Optimization algorithm based efficient task scheduling for big data application in a cloud computing environment,” Journal of Multimedia Tools Application, Springer, 2023. doi.org/10.1007/s11042-024-19887-1
B. Neha, S. K. Panda, P. K. Sahu, K. S. Sahoo, and D. Taniar, “Energy and latency-balanced osmotic-offloading algorithm for healthcare systems,” Journal of Internet of Things, Elsevier, vol. 26, 2023. doi.org/10.1016/j.iot.2024.101176
A. K. Mishra, S. Mohapatra, P. K Sahu, “Coalition theory based task scheduling algorithm using DLFC-NN model,” Journal of Concurrency and Computation Practice and Experience, WILEY, vol. 36, Issue. 10, pp. 1-15, 2023. doi.org/10.1002/cpe.8005
S. Dash, P. K. Sahu, D. Mishra, “Forex market directional trends forecasting with Bidirectional-LSTM and enhanced DeepSense network using all member-based optimizer,” Journal of Intelligent Decision Technologies, vol. 17, Issue: 4, pp. 1351-1382, 2023. doi.org 10.3233/IDT-230183
A. K. Mishra, S. Mohapatra, P. K Sahu,” Survey on Performance and Energy – Aware Task Scheduling over Big Data in Cloud Computing,” Journal of Neuroscience and Quantum Physics, NeuroQuantology, vol. 20, issue 22, pp. 393-433, 2022. doi.org 10.48047/nq.2022.20.22.NQ10030
S. Dash, P. K. Sahu, D. Mishra, P. K. Mallick, B. Sharma, M. Zymbler, and S. Kumar, “A Novel Algorithmic Forex Trade and Trend Analysis Framework Based on Deep Predictive Coding Network Optimized with Reptile Search Algorithm,” Axioms, MDPI, vol. 11, issue 8, pp. 1-27, 2022. doi.org 10.3390/axioms11080396
A. Pradhan, M. R. Senapati, and P. K. Sahu, “A multichannel embedding and arithmetic optimized stacked Bi-GRU model with semantic attention to detect emotion over text data,” Journal Applied Intelligence, Springer, vol. 52, issue 9, pp. 1-18, 2022. doi.org 10.1007/s10489-022-03907-4
A. Pradhan, M. R. Senapati, and P. K. Sahu, “ABET: an afective emotion topic method of biterms for emotion recognition from the short texts,” Journal of Ambient Intelligence and Humanized Computing, Springer, vol. 13, issue 4, pp. 1-13, 2022. doi.org/10.1007/s12652-022-03799-9
A. Ranganath, P. K. Sahu, and M. R. Senapati, “A novel pixel range calculation technique for texture classification,” Multimedia Tools Application, Springer, vol 81, issue 13, pp. 17639-17667, 2022. doi.org/10.1007/s11042-022-12186-7
B. Neha, S. K. Panda, P. K. Sahu, K. S. Sahoo, and A. H. Gandomi, “A Systematic Review on Osmotic Computing,” ACM Transaction on Internet of Things, ACM, vol. 3, issue 2, pp. 1-30, 2022. doi.org/10.1145/3488247
A. Ranganath, P. K. Sahu, and M. R. Senapati, “A novel approach for detection of coronavirus disease from computed tomography scan images using the pivot distribution count method,” Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization, Taylor & Francis, vol. 9, issue 5, pp. 1-12, 2021. doi.org/10.1080/21681163.2021.1998925
A. Pradhan, M. R. Senapati, and P. K. Sahu, “Improving sentiment analysis with learning concepts from concept, patterns lexicons and negations,” Ain Shams Engineering Journal, Elsevier, vol. 13, issue 2, pp. 1-13, 2021. doi.org/10.1016/j.asej.2021.08.004
B. Neha, S. K. Panda, and P. K. Sahu, “An efficient task mapping algorithm for osmotic computing-based ecosystem,” International Journal of Information Technology, Springer, vol. 13, issue 3, pp. 1-6, 2021. doi.org/10.1007/s41870-021-00715-w
S. Pattnaik and P. K. Sahu, “Adaptive Neuro-Fuzzy Inference System-Particle swarm optimization-based clustering approach and hybrid Moth-flame cuttlefish optimization algorithm for efficient routing in wireless sensor network,” International Journal of Communication Systems, Wiley, vol. 34, issue 9, pp. 1-28, 2021. doi.org/10.1002/dac.4783
S. Dash, M. R. Senapati, P. K. Sahu, P. S. R. Choedary “Illumination normalized based technique for retinal blood vessel segmentation” International Journal of Imaging system Technology, Wiley, vol. 31, issue 1, pp. 351-363, 2020. doi.org/10.1002/ima.22461
A. Ranganath, M. R. Senapati, P. K. Sahu, “Estimating the fractal dimension of images using pixel range calculation technique” The Visual Computer, Springer, vol. 37, issue 8, pp. 635-650, 2020. doi.org/10.1007/s00371-020-01829-1
S. Pattnaik, P. K. Sahu, “Assimilation of fuzzy clustering approach and EHO-Greedy algorithm for efficient routing in WSN” International Journal of Communication systems, Wiley, vol. 33, issue 8, pp. 1-20, 2020. doi.org/10.1002/dac.4354
P. K. Sahu, and S. Chattopadyay, “A Survey on Application Mapping Strategies for Network-on-Chip Design,” Journal of System Architecture, Elsevier (JSA), vol. 59, issue 1, pp. 60-76, Jan. 2013, DOI: 10.1016/j.sysarc.2012.10.004, ISSN: 1383-7621.
P. K. Sahu, T. Shah, K. Manna, and S. Chattopadyay, “Application Mapping onto Mesh based Network-on-Chip using Discrete Particle Swarm Optimization,” IEEE Transactions on VLSI Systems (T-VLSI), 22 (2), pp. 300-312, Mar. 2013, DOI: 10.1109/ TVLSI.2013.2240708, ISSN: 1063-8210.
P. K. Sahu, K. Manna, N. Shah, and S. Chattopadyay, “Extending Kernighanâ€“Lin partitioning heuristic for application mapping onto Network-on-Chip,” Journal of System Architecture (JSA), Elsevier, vol. 60, pp. 562-578, May 2014. DOI: 10.1016/j.sysarc.2014.04.004, ISSN: 1383-7621.
P. K. Sahu, K. Manna, T. Shah, and S. Chattopadyay, “Thermal Uniformity-Aware Application Mapping for Network-on-Chip Design,” International Journal of Computer Applications, vol. 99 (2), pp. 8-22, Aug. 2014. DOI: 10.5120/17351-7838, ISSN: 0975 â€“ 8887.
P. K. Sahu, K. Manna, and S. Chattopadyay, “Application Mapping onto Butterfly-Fat-Tree based Network-on-Chip using Discrete Particle Swarm Optimization,” International Journal of Computer Applications, vol. 115 (2), pp. 13-22, April. 2015, DOI: 10.5120/20258-2643, ISSN: 0975 â€“ 8887.
P. K. Sahu, K. Manna, T. Shah, and S. Chattopadyay, “A Constructive Heuristic for Application Mapping onto Mesh based Network-on-Chip,” Journal of Circuits, Systems, and Computers, World Scientific, vol. 24, issue. 8, pp. 1-29, Jun. 2015, DOI: 10.1142/S0218126615501261, ISSN: 0218-1266.
Mishra, A., Dandapat, R., Priyadarshan, P., and Bari, M. (2025). “An experimental study on the behavior of concrete using lightweight aggregates derived from fly ash and clay subjected to elevated temperature”, The Indian Concrete Journal, 99(4), 41-50.
A Chand, R Dandapat, D. Adak, M. L. Patton, S. B. F. Warsi , (2025)” Numerical approach to assess the performance of concrete filled steel tube (CFST) stub columns under fire hazard.” Journal of Structural Design and Construction Practice, ASCE Library,30(3)
C. Das, T. Dey, R. Dandapat, B.B. Mukherjee, J. Kumar (2018) “Performance Evaluation of Polypropylene Fibre Reinforced Recycled Aggregate Concrete.” Construction and Building Material, Elsevier, 189, 649–659.
R. Dandapat, S. Ghosh, and A. Deb, (2018). “A Discrete Element Implementation for Concrete: Particle Generation, Contact Calculations, Packing Under Gravity and Modeling Material Response.” Granular Matter, Springer, 20(2),30-65.
R. Dandapat, A.Â Deb, and S. K. Bhattacharyya, (2012). “Localized Failure in Fiber-Reinforced Polymer-Wrapped Cylindrical Concrete Columns.” ACI Structural Journal, 109(4), 445-456.
R. Dandapat, A.Â Deb, and S. K. Bhattacharyya, (2011). “Failure Modes for FRP Wrapped Cylindrical Concrete Columns.” Journal of Reinforced Plastics and Composites, 30(7), 561-580.
R. Dandapat, and A.Â Deb, (2016). “A Probability Based Model for the Erosive Wear of Concrete by Sediment Bearing Water.” Wear, Elsevier, 350-351, 166-181.
V. Prakash and L. Parida, “Vitamin-e encapsulated nanoemulsions: Formulation, rheological and antimicrobial analysis,” Journal of Medical, Pharmaceutical and allied Sciences, vol. 12, 2023.
V. Prakash and L. Parida, “Characterization and rheological behavior of vitamin e nanoemulsions prepared by phase inversion composition technique,” Results in Engineering, vol. 18, 2023.
Murmu, L. Parida, and P. Senapati, “Desilication of high-silica indian coal fly ash by alkali leaching with koh and naoh: A comparative study,” International Journal of Coal Preparation and Utilization, 2023. doi: 10.1080/19392699.2023.2228708.
L. Parida, “The locomotory characteristics of caenorhabditis elegans in various external environments: A review,” Applied Animal Behaviour Science, vol. 255, 2022.
L. Parida and V. Padmanabhan, “Chemotactic behavior of caenorhabditis elegans in different chemical gradients,” International Journal of Animal Biotechnology and Applications, vol. 5, pp. 25–37, 2019.
Effect of temperature pre-exposure on the locomotion and chemotaxis of C. elegans, LipikaParida, SudarsanNeogi, and VenkatPadmanabhan, PLoS ONE, 9, e111342, 2014.
Durotaxis in nematodes Caenorhabditiselegans,LipikaParida and VenkatPadmanabhan, Biophysical Journal, 111, 666-674, 2016.
The effects of groove height and substrate stiffness on C. elegans locomotion, LipikaParida, Udita Uday Ghosh, and VenkatPadmanabhan, Journal of Biomechanics, 55, 34-40, 2017.
Tapaswini Nayak, M.R.Senapati, S.Prasad “A Text Mining Approach For Information Retrieval Used In Product Rating”, International Journal of Applied Engineering Research, Research India Publication, January 2015, vol-10, Issue-10, pp: 27137-27146,ISSN: 0973- 4562, https://dx.doi.org/10.19026/rjaset.10.1884
M.R Senapati,S. P Das, P.K.Champati, P.K.Routray, “Local Linear Radial Basis Function Neural networks for Classification of Breast Cancer data”, Progress In Science and Engineering Research Journal, November-December 2014, PISER 16, vol-02, Issue: 06, pp 033-042,ISSN 2347-6680,.
Pandit Byomokesha Dash, Manas Ranjan Senapati, H. S. Behera, Janmenjoy Nayak, S. Vimal, “Self-adaptive memetic firefly algorithm and CatBoost-based security framework for IoT healthcare environment”, Journal of Engineering Mathematics, Springer, online first, 18th December 2023, SCI,https://doi.org/10.1007/s10665-023-10309-z
Soumya Das, Monalisa Nayak, Manas Ranjan Senapati “Improving Time Series Prediction with Deep Belief Network”, Journal of Institution of Engineers, Series B, Springer, 25th August 2023, online first, Scopus, EISSN:2250-2114, https://doi.org/10.1007/s40031-023-00912-0
AbhimanyuPatra, Sarojananda Mishra, Manas Ranjan Senapati, Rajesh Kumar Behera, Subhendu Kumar Pani,“Analysis of Multi-class Patterns in corporate hospitals using Time-varying Databases”, Jilin Daxue Xuebao (Gongxueban)/Journal of Jilin University (Engineering and Technology Edition) ISSN: 1671-5497 E-Publication: Online Open Access Vol: 42 Issue: 05-2023, DOI 10.17605/OSF.IO/4CBSX
Chandrakant Mallick, Sarojananda Mishra, Manas Ranjan Senapati, “A cooperative deep learning model for fake news detection in online social networks”, Journal of Ambient Intelligence and Humanized Computing, Springer, 8th February 2023, Scopus, https://doi.org/10.1007/s12652-023-04562-4
Anima Pradhan, Manas Ranjan Senapati, Pradip Kumar Sahu, “A multichannel embedding and arithmetic optimized stacked Bi-GRU model with semantic attention to detect emotion over text data”, Applied Intelligence, Springer, published 26 July 2022, ISSN: 0924-669X, SCI Indexed, EISSN 1868-5145, https://doi.org/10.1007/s10489-022-03907-4
Monalisa Nayak, Soumya Das, Manas Ranjan Senapati, Santosh Kumar Majhi, “Improving Time Series Prediction with Feature Selection Using a Velocity Enhanced Whale Optimization Algorithm”, International Journal of Swarm Intelligence and Research, vol:-13, Issue-1, Scopus Indexed, pp:1-29, August 2022, ISSN: 1947-9263,doi: 10.4018/IJSIR.307104
Anima Pradhan, Manas Ranjan Senapati, Pradip Kumar Sahu “ABET: An effective emotion-topic method of biterms for emotion recognition from the short texts”, Journal of Ambient Intelligence and Humanized Computing, Springer, 2nd April 2022,Scopus, https://doi.org/10.1007/s12652-022-03799-9
Monalisa Nayak, Soumya Das, Manas Ranjan Senapati, “Improving flood prediction using deep learning methods”, Journal of Institution of Engineers, Series B, Springer, 7th March 2022, online first, Scopus, EISSN:2250-2114https://doi.org/10.1007/s40031-022-00720-y
Abadhan Ranganath, Manas Ranjan Senapati, Pradip Kumar Sahu, “A novel pixel range calculation technique for texture classification”, Multimedia tools and Application, Springer, 7th March 2022, Online First, SCI https://doi.org/10.1007/s11042-022-12186-7
Monalisa Nayak, Soumya Das, Urmila Bhanja, Manas Ranjan Senapati (2022): “Predictive Analysis for Cancer and Diabetes Using Simplex Method Based Social Spider Optimization Algorithm”, IETE Journal of Research, 3rd February 2022, Online First, SCI, DOI: 10.1080/03772063.2022.2027276
Monalisa Nayak, Soumya Das, Urmila Bhanja,Manas Ranjan Senapati, “Simplex Based Social Spider Optimization Method for Improving Medical Data Analysis”,Computer Science & Engineering: An International Journal (CSEIJ), Vol 12, No 1, February 2022, ISSN: 2231- 329X, https://doi:10.5121/cseij.2022.12111
Abadhan Ranganath, Pradip Kumar Sahu, Manas Ranjan Senapati, “A novel approach for detection of coronavirus disease from computed tomography scan images using the pivot distribution count method”, Computer methods in biomechanics and biomedical engineering: Imaging and Visualization, Taylor and Francis, Online first, 29th October 2021, online ISSN: 2168-1171,Scopus https://doi.org/10.1080/21681163.2021.1998925
Anima Pradhan, Manas Ranjan Senapati, Pradip Kumar Sahu, “Improving sentiment analysis with learning concepts from concept, patterns lexicons and negations”, Ain Shams Engineering Journal, Elsevier Science, Vol 13, Issue-2, March 2022, ISSN: 2090-4479, SCI, https://doi.org/10.1016/j.asej.2021.08.004.
Monalisa Nayak, Soumya Das, Urmila Bhanja, Manas Ranjan Senapati, â€œFinancial Time-Series Prediction with Feature Selection Using Simplex Method Based Social Spider Optimization Algorithmâ€, Indian Journal of Computer Science and Engineering, SCOPUS Indexed, Mar-Apr 2021, Vol. 12, Issue No.2,pp. 326- 347, ISSN: 0976-5166, https://doi.org/10.21817/indjcse/2021/v12i2/211202036
Monalisa Nayak, Soumya Das, Urmila Bhanja, Manas Ranjan Senapati, â€œCancer Diagnosis using Enhanced Whale Optimization Algorithmâ€,International Journal of Advanced Computational Engineering and Networking, Volume-8, Issue-2, Feb.-2020, ISSN(p): 2320-2106, ISSN(e):2321-2063, IJACEN-IRAJ-DOIONLNE-16926
Monalisa Nayak, Soumya Das, Urmila Bhanja, Manas Ranjan Senapati, â€œElephant Herding Optimization Technique based Neural Network for Cancer Predictionâ€, Informatics in Medicine Unlocked, Elsevier Science, 8th October 2020, ISSN: 2352-9148,https://doi.org/10.1016/j.imu.2020.100445
Soumya Das, Sarojananda Mishra, Manas Ranjan Senapati, â€œImproving Time Series Forecasting using Elephant Herd Optimization with Feature Optimization Methodsâ€, Journal of Management Analysis, Taylor & Francis, Online First, 06.10.2020, ISSN: 2327-0012, https://doi.org/10.1080/23270012.2020.1818321
Sonali Dash, Manas Ranjan Senapati, Pradip Kumar Sahu,P. S. R. Chowdary, â€œIlluminationnormalized based technique for retinal bloodvessel segmentationâ€,International Journal of Imaging Systems and Technology, Wiley, 7th June 2020, ISSNâ€Ž: â€Ž1098-1098,https://doi.org/10.1002/ima.22461
AbadhanRanganath, Manas Ranjan Senapati, Pradip Kumar Sahu, â€œEstimating the fractal dimension of images using pixel range calculation techniqueâ€, The Visual Computer, 5th March 2020, ISSN: 0178-2789 https://doi.org/10.1007/s00371-020-01829-1
Sreelekha Panda, Satyasis Mishra,Manas Ranjan Senapati, â€œDetection and Classification Methods for EEG Epileptic Seizuresâ€, International Journal of Advanced Trends in Computer Science and Engineering, Vol-8, No-6, Nov-Dec 2019, ISSN:2278 -3091, https://doi.org/10.30534/ijatcse/2019/40862019
Sonali Dash, Manas Ranjan Senapati, â€œNoise Robust lawâ€™s filters based on fuzzy filters for texture classificationâ€, Egyptian Informatics Journal, 15th October 2019, pp 37-49, ISSN: 1110-8665,https://doi.org/10.1016/j.eij.2019.10.003
Sonali Dash, Manas Ranjan Senapati, â€œEnhancing detection of retinal blood vessels by combined approach of DWT, Tyler Coye and Gamma correctionâ€, Biomedical Signal Processing and Control, Elsevier Science, 26th October 2019, vol-57, ISSN: 1746-8094,https://doi.org/10.1016/j.bspc.2019.101740
Satyasis Mishra, PremanandaSahu, Manas Ranjan Senapati, â€œAPSO based LLRBFNN model and enhanced fuzzy C means algorithm for brain tumor detection and classification from magnetic resonance imageâ€, International Journal of Engineering and Technology, vol-8, issue-4, 2nd July 2019, pp- 490-499, ISSN: 2319-8613, https://dx.doi.org/10.14419 / ijet. v8i4.20445.
Satyasis Mishra, PremanandaSahu, Manas Ranjan Senapati, â€œMASCAâ€“PSO based LLRBFNN model and improved fast and robustFCM algorithm for detection and classification of brain tumor from MRimageâ€, Evolutionary Intelligence, Springer, 20th July 2019, pp:- 1-17, ISSN: 1864-5909 , https://doi.org/10.1007/s12065-019-00266-x
Soumya Das, Sarojananda Mishra, Manas Ranjan Senapati, â€œNew Approaches in Metaheuristic to Classify Medical Data UsingArtificial Neural Networkâ€,Arabian Journal of Science and Engineering, Springer, 10th July 2019, pp:-1-13, ISSN: 2193-567X, https://doi.org/10.1007/s13369-019-04026-y
Binaya Kumar Panigrahi, Tushar Kumar Nath, Manas Ranjan Senapati, â€œAn Application of Local Linear radial basis Function Neural Network for Flood Predictionâ€, Journal of Management Analysis, Taylor and Francis, 18th January 2019, vol-6, issue-1, pp:-67-87, ISSN: 2327-0012, https://doi.org/10.1080/23270012.2019.1566033
Sonali Dash, Manas Ranjan Senapati, â€œGray Level Run Length Matrix based on various illumination normalization techniques for texture classificationâ€, Evolutionary Intelligence, Springer, 17th August 2018, pp-1-10, ISSN 1864-5909,https://doi.org/10.1007/s12065-018-0164-2
D. K. Sahu, A.Patra,, S.N.Mishra,M.R.Senapati, â€œTechniques for Time Series Prediction: - A Reviewâ€, International Journal of Research Science and Management, vol: 2, issue 3: March, 2015, ISSN: 2349-5197; pp-6-13
Ila Swain, Manas Ranjan Senapati, â€œArtificial Neural Network for Distribution Systemsâ€, National Seminar on Future Trends on Data Mining, 2010.
S.Das, S.N.Mishra, M. R. Senapati, â€œA Novel Model for Stock Price Prediction using Hybrid Neural Networkâ€, IEIB, Springer, Online first, DOI :10.1007/s40031-018-0343-7.
B. K. Panigrahi, S. Das, T. K. Nath, M. R. Senapati, â€œAn Application of Data Mining Techniques for Flood Forecasting: Application in Rivers Daya and Bhargavi, Indiaâ€, IEIB, Springer, Online first, DOI :10.1007/s40031-018-0333-9.
Sonali Dash, Manas Ranjan Senapati, Uma Ranjan Jena, â€œK-NN based automated reasoning using bilateral filter based texture descriptor for computing texture classificationâ€, Egyptian Informatics Journal, Elsevier Science, https://doi.org/10.1016/j.eij.2018.01.003
Sonali Dash, Uma Ranjan Jena, Manas Ranjan Senapati, â€œHomomorphic Normalization-Based Descriptors for Texture Classificationâ€, Arab J Sci Eng, Springer, pp. 1-11, (2017), doi.org/10.1007/s13369-017-2961-9
A.Patra, S.Das, S.N.Mishra, M.R.Senapati, â€œA adaptive local linear optimized radial basis functional neural network model for financial time series predictionâ€, Neural Computing and Application, Springer, January 2017, Volume 28, Issue 1, pp 101â€“110,DOI: DOI 10.1007/s00521-015-2039-0
S.Swain, S.Prasad, M.R.Senapati, â€œA Review of Big data and its current research directionâ€, International Journal of Engineering, Science and Mathematics, December-2017, Vol-6, Issue-8, ISSN: 2320-0294.
Tapaswini Nayak, S.Prasad, M.R.Senapati, â€œHybrid soft computing approach for hydro power energy prophecyâ€, International Journal of Engineering Research and Technology, Vol-9, No-2, pp 121-134, ISSN: ISSN: 2278-0181
Tapaswini Nayak, M.R.Senapati, S.Prasad â€œA Survey on Web text Information Retrieval in Textâ€, â€œResearch Journal of Applied Sciences, Engineering and Technologyâ€, Maxwell Publication, ISSN: 2040- 7467, Vol 10, Issue 10, pp: 1164-1174, 05 August 2015.
S.Das, S.Prasad, S.Mishra, M.R.Senapati â€œA Harmony Search based Artificial Neural Network for Stock Market Predictionâ€, International Journal of Business Forecasting and Marketing Intelligence, InderScience, 2015, Vol-2, No-1, pp. 19-36 ISSN: 1744-6635, doi.org/10.1504/IJBFMI.2015.075358
S.Das, A.Patra, S.N.Mishra, M.R.Senapati, â€œA self-adaptive fuzzy based optimized functional link artificial neural network model for financial time series predictionâ€, International Journal of Business Forecasting and Marketing Intelligence, Inderscience, Vol-2, No-1, pp.55-77, ISSN: 1744-6635, https://doi.org/10.1504/IJBFMI.2015.075323
Mishra, S.P. , Prasad, S. , Senapati, M.R., â€œA comparative analysis on java code coverage tools in software testingâ€,International Journal of Applied Engineering Research, Vol-10 Issue 13, pp. 33499-33503, 24 August 2015.
M. R. Senapati, G.Panda, P. K. Dash, â€œHybrid Approach using KPSO and RLS for RBFNN design for Breast Cancer Detectionâ€, Neural Computation & Application, Springer, ISSN 0941-0643,vol 24, issue 3, pp. 745-753, March 2014, DOI10.1007/s00521-012-1286-6.
M.R.Senapati, P.K.Dash, â€œIntelligent Systems Based on Local Linear Wavelet Neural Network and Recursive Least Square Approach for Breast Cancer Classificationâ€, Artificial Intelligence and Review, Springer, ISSN 0269-2821. vol 39, issue 2, pp 151-163, February 2013, DOI: 10.1007/s10462-011-9263-5.
A.K. Mohanty, M. R. Senapati, S.K.Lenka, â€œA novel mining technique for classification of mammograms using hybrid feature selectionâ€, Neural Computing and Application, Springer, ISSN: 0941-0643, vol 22, issue 6, pp 1151-1161, May 2013, DOI: 10.1007/s00521-012-0881-x
M.R.Senapati, P.K.Dash, â€œLocal Linear wavelet Neural Network based breast cancer classification using firefly algorithmâ€, Neural Computing and Application, Springer, ISSN: 0941-0643, Vol 22, Issue 7, pp 1591-1598, September 2013, DOI 10.1007/s00521-012-0927-0
M. R. Senapati, A. K. Mohanty, S. Dash, P. K. Dash, â€œLocal linear wavelet neural network for breast cancer recognitionâ€, Neural Computing and Applicationâ€, Springer, ISSN: 0941-0643, vol 22, issue 1, pp 125-131, January 2013, DOI 10.1007/s00521-011-0670-y.
Aswini Kumar Mohanty,Manas Ranjan Senapati, Swapnasikta Beberta, Saroj Kumar Lenka,â€œTexture-based features for classification of mammograms using decision treeâ€, Published in Neural computing and application, Springer, ISSN: 0941-0643, Vol 23, issue 4, pp 412-418, September 2013, DOI 10.1007/s00521-012-1025-z
Suchismita Sahoo, Susreesangita Sahoo, M.R.Senapati, P.K.Dash, â€œLocal Linear Neural Network and RLS for usable speech classificationâ€, International Journal of Computer Science Issues, vol.8, issue 4, pp. 412-418, July 2011.
M.R.Senapati, I.Vijaya, P.K.Dash â€œRule Extraction by Training Radial Basis Functional Neural Network with Particle Swarm Optimizationâ€ published in American Journal of Science, Science Publication, ISSN: 1549-3636, vol 3, issue 8, pp.592-599,2007
M.R.Senapati, P.K.Dash, Maya Nayak, I.W.C. Lee â€œMining for similarities in time series data using wavelet-based feature vectors and neural networksâ€ published in â€œEngineering Application of Artificial Intelligenceâ€™ Elsevier Science, ISSN: 0952-1976, vol 20, Issue: 2, pp.185-201, 2007, https://doi.org/10.1016/j.engappai.2006.06.018
Mohapatra, B. and Mohamed, A. R. (2015) ' The effect of social and spatial processes on the Provision of Urban Open Spaces: the Case of Bhubaneswar in India', International Journal of Green Economics, Vol. 9, No. 1, pp. 1-23.
Mohapatra, B. and Mohamed, A. R. (2013) 'Exploring the Associations between Recreational Use and Attachment to Neighbourhood Open Space', International Journal of Ecology & Development, Vol. 24, No. 1, pp. 95-108.
Mohapatra, B. and Mohamed, A. R. (2013), 'Place Attachment and Participation in Management of Neighbourhood Green Space: A Place Based Community Management', International Journal of Sustainable Society, Vol. 5, No. 3, pp. 266-283.
Mohapatra, B. (2012) 'A Study on Components of Community Based Management of Urban Open Space', International Journal of Ecology and Development, Vol. 23, No. 3, pp. 99- 115.
Mohapatra, B. and Sanjay M. (2011), “Strategic Framework for Public Space Planning and Management in Indian Cities”, Indian Journal of Development Research and Social Action (An International Journal), Vol. 11, No.1, pp 91-104.
Sunita Sethy, Jaydev Rana, â€œPerformance analysis of EDM process using multi response optimization techniquesâ€,National Conference on Technological Advancement in Manufacturing & Processing of New Materials(TAMPNM-2016),VSSUT,Burla,Odisha,9th-10th Apr,2016.
Sunita Sethy , Jaydev Rana â€œImprovement of Electro-Discharge machining performance of Ti-6Al-4V using Silicon Carbide powder mixed in EDM oil and optimization of process parametersâ€ 3rd Online International Conference ICRAIMR 2020 organised by Foundation of Innovative Research at Asian Institute of Technology, THAILAND, European journal of Molecular and clinical medicine 2020, Volume 7(issue 11, Page 1643-1655, (online ISSN: 2515-8260)
Padhan, Smita; Das, Anshuman; Santoshwar, Aniket; Dharmendrabhai, Thakkar Raj; Das, Sudhansu Ranjan (2020). Sustainability Assessment and Machinability Investigation of Austenitic Stainless Steel in Finish Turning with Advanced Ultra-Hard SiAlON Ceramic Tool under Different Cutting Environments. Silicon, (), â€“. doi:10.1007/s12633-020-00409-1
Padhan, Smita; Dash, Lalatendu; Behera, Santosh Kumar; Das, Sudhansu Ranjan (2020). Modeling and Optimization of Power Consumption for Economic Analysis, Energy-Saving Carbon Footprint Analysis, and Sustainability Assessment in Finish Hard Turning Under Graphene NanoparticleÃ¢Â€Â“Assisted Minimum Quantity Lubrication. Process Integration and Optimization for Sustainability, (), â€“. doi:10.1007/s41660-020-00132-9
Dash, Lalatendu; Padhan, Smita; Das, Sudhansu Ranjan (2020). Experimental investigations on surface integrity and chip morphology in hard tuning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42(10), 500â€“. doi:10.1007/s40430-020-02594-x
Dash L, Padhan S, Das A, Das SR. Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. May 2021. doi:10.1177/0954406221993844
Dash, L., Padhan, S., & Das, S. R. (2020). Design optimization for analysis of surface integrity and chip morphology in hard turning. Structural Engineering and Mechanics, 76(5), 561â€“578. https://doi.org/10.12989/SEM.2020.76.5.561
N. K. Kund (Sole Author) (2024), Effect of the nozzle diameter and melt velocity at the tundish outlet on solidification along microstructural and mechanical properties of the cooling slope casted AZ91 Mg alloy, Canadian Metallurgical Quarterly (Taylor & Francis), Vol. 63, pp. 247-255 (Impact Factor = 1.3) (SCI).
P. Mohapatra and N. K. Kund (Sole Co-author) (2022), Impact of ultrasonic power on liquid fraction, microstructure and physical characteristics of A356 alloy molded through cooling slope, Journal of Central South University (Springer), Vol. 29, pp. 1098-1106 (Impact Factor = 3.7) (SCI).
S. K. Sahu and N. K. Kund (Sole Co-author) (2023), Influence of slurry delivery rate and height from cooling slope outlet on solidification and structural behaviors of molded AZ91 magnesium alloy, Journal of Mechanical Engineering Science (Proceedings of the Institution of Mechanical Engineers, Part C) (Sage), Vol. 237, pp. 1719-1727 (Impact Factor: 1.8) (SCI).
N. K. Kund and P. Dutta (One Co-author) (2010), Numerical simulation of solidification of liquid aluminum alloy flowing on cooling slope, Transactions of Nonferrous Metals Society of China (Elsevier), Vol. 20, pp. 898-905 (Impact Factor: 4.7) (SCI).
N. K. Kund and P. Dutta (One Co-author) (2012), Scaling analysis of solidification of liquid aluminum alloy flowing on cooling slope, Transactions of the Indian Institute of Metals (Springer), Vol. 65, pp. 587-594 (Impact Factor: 1.5) (SCI).
N. K. Kund (Sole Author) (2014), Influence of melt pouring temperature and plate inclination on solidification produced by using oblique plate, Transactions of Nonferrous Metals Society of China (Elsevier), Vol. 24, pp. 3465-3476 (Impact Factor: 4.7) (SCI).
N. K. Kund (Sole Author) (2015), Influence of plate length and plate cooling rate on solidification produced by using oblique plate, Transactions of Nonferrous Metals Society of China (Elsevier), Vol. 25, pp. 61-71 (Impact Factor: 4.7) (SCI).
N. K. Kund and P. Dutta (One Co-author) (2015), Numerical study of solidification of A356 aluminum alloy flowing on an oblique plate with experimental validation, Journal of the Taiwan Institute of Chemical Engineers (Elsevier), Vol. 51, pp. 159-170 (Impact Factor: 5.5) (SCI).
N. K. Kund and P. Dutta (One Co-author) (2016), Numerical study of influence of oblique plate length and cooling rate on solidification and macrosegregation of A356 aluminum alloy melt with experimental comparison, Journal of Alloys and Compounds (Elsevier), Vol. 678, pp. 343-354 (Impact Factor: 5.8) (SCI).
N. K. Kund (Sole Author) (2018), Effect of tilted plate vibration on solidification and microstructural and mechanical properties of semisolid cast and heat-treated A356 Al alloy, International Journal of Advanced Manufacturing Technology (Springer), Vol. 97, pp. 1617-1626 (Impact Factor: 2.9) (SCI).
Pankaj Kumar Swain, Arun Kumar Rout, Jitesh Kumar Singh, Dibakar Sahoo, Srimant Kumar Mishra, Development and analysis of Fe-doped ZnO nanoparticle-infused sisal fiber reinforced hybrid polymer composites for high-performance sound absorption and thermal insulation applications, Industrial Crops and Products, 222, 119763, 2024.
Arun Kumar Rout, Jitesh Kumar Singh, An overview of advanced fiber reinforced polymer composites and it’s applications, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 8, 311-318, 2018.
Jitesh Kumar Singh, Arun Kumar Rout , Experimental investigation on tribo-performance of rice husk nanoparticles blend epoxy composites reinforced by Borassus flabellifer L. fibre using neural network approach, Materials Today Communications, 38, 107971, 2024.
Jayasmita Das, Arun Kumar Rout , Soumya Ranjan Parimanik, Itishree Rout, Trupti Ranjan Mahapatra, Debadutta Mishra, Dynamic Mechanical, and Static analysis of kevlar fiber reinforced epoxy composites incorporated with egg shell particle, 32(1), 2024.
Lipsamayee Mishra, Trupti Ranjan Mahapatra, Debadutta Mishra, Soumya Ranjan Parimanik, Arun Kumar Rout , Parametric optimization of hole quality in Nd: YAG laser drilled carbon black/epoxy composite by grey based whale optimization technique, Materials Today: Proceedings, 2024.
Binita Dash, Trupti Ranjan Mahapatra, Debadutta Mishra, Arun Kumar Rout , Acoustic radiation efficiencies of laminated composite structure under mechanical excitation and hygrothermal loading: Numerical analysis, Materials Today: Proceedings, 91, 25-32, 2023.
Jitesh Kumar Singh, Arun Kumar Rout , Study on the physical, mechanical, and thermal behaviour of RHN blend epoxy hybrid composites reinforced by Borassus flabellifer L. fibers, Cellulose, 30(8), 5033-5049, 2023
Jitesh Kumar Singh, Arun Kumar Rout , Thermal stability and dynamic mechanical analysis of nano-biofillers blended hybrid composites reinforced by cellulosic Borassus flabellifer L. fiber, International Journal of Polymer Analysis and Characterization, 28(6), 552-563, 2023.
Soumya Ranjan Parimanik, Trupti Ranjan Mahapatra, Debadutta Mishra, Arun Kumar Rout , Optimisation of performance characteristics in laser welding of Nitinol wires using Taguchi and grey relation analysis, Advances in Materials and Processing Technologies, 9(1), 186-195, 2023.
Trilokinath Mishra, Paulami Mandal, Arun Kumar Rout , Dibakar Sahoo, A state-of-the-art review on potential applications of natural fiber-reinforced polymer composite filled with inorganic nanoparticle, Composites Part C, 9, 100298, 2022.
Jitesh Kumar Singh, Arun Kumar Rout , Characterization of raw and alkali-treated cellulosic fibers extracted from borassus flabellifer L., Biomass Conversion and Biorefinery, 14, 11633–11646, 2022.
Jitesh kumar Singh, Arun Kumar Rout, Kanchan Kumari, A review on Borassus flabellifer lignocellulose fiber reinforced polymer composites, Carbohydrate Polymers, 262, 117929, 2021.
Jnanaranjan Kar, Arun Kumar Rout, Alekha Kumar Sutar, Tanmay Mohanty, Study on static and dynamic mechanical properties of hybrid palm stalk fiber reinforced epoxy compositesâ€, BioResources, 15(2), 4249-4270, 2020.
Subhrajit Ray, Arun Kumar Rout, Ashok Kumar Sahoo, â€œ A comparative analysis of the abrasion wear characteristics of industrial wastes filled glass/polyester composites based on design of experiment and artificial neural networkâ€, Polymer Composites, DOI: 10.1002/pc.25836, 2020.
Amalana Panda, Ashok Kumar Sahoo, Isham Panigrahi, Arun Kumar Rout, â€œPrediction models for on-line cutting tool and machined surface condition monitoring during hard turning considering vibration signalâ€, Mechanics & Industry, 21, 520, 2020.
Subhrajit Ray, Arun Kumar Rout, Ashok Kumar Sahoo, â€œEffect of marble paticle on physic-mechanical behavior of glass fiber reinforced epoxy compositesâ€, Int. J. of Integrated Engineering, 11(06), 93-102, 2019.
Subhrajit Ray, Arun Kumar Rout, Ashok Kumar Sahoo , â€œTribomechanical performance of glassâ€“epoxy hybrid composites filled with marble powder with the taguchi design and artificial neural networkâ€, Composites: mechanics, computations, applications,10(1),17-38, 2019.
Jnanaranjan Kar, Arun kumar Rout, Alekh kumar Sutar , â€œPhysical ,mechanical and erosion characterization of palm leaf stalk fibre reinforced epoxy composites filled with palm leaf stem stalk(PLSS) powder â€ BioResources,13(4),7212-7231, 2018.
Ray,S., Rout A.K. and Sahoo,A.K , â€œDevelopment and characterization of glass/polyester composites filled with industrial wastes using statistical techniquesâ€, Indian Journal of Engineering & material sciences,25,169-182, 2018.
Panda,A., Sahoo,A.K., Panigrahi,I.,Rout A.K.,â€œInvestigating machinability in hard turning of aisi 52100 bearing steel through performance measurement: qr, ann and gra studyâ€, International journal of automotive and mechanical engineering , 15 (1),4935-4961, 2018.
Jesthi,D.K., Mandal, P., Rout A.K., Nayak,R.K., â€œEffect of carbon/glass fiber symmetric inter-ply sequence on mechanical properties of polymer matrix compositesâ€,Procedia manufacturing, 20, 530-535, 2018.
Jesthi,D.K., Mandal, P., Rout A.K., Nayak,R.K., â€œEnhancement of mechanical and specific wear properties of glass/carbon fiber reinforced polymer hybrid compositeâ€, Procedia manufacturing, 20, 536-541, 2018.
Arun kumar Rout, Manoj kumar, Banabihari Nayak, â€œTribo-mechanical performance of silicon carbide-reinforced aa6061 metal matrix composites using the taguchi methodologyâ€, Composites: Mechanicsâ€, Computations, Applications: An International Journal, 8(1),67-83, 2017.
AmlanaPanda, Ashok KumarSahoo, Arun Kumar Rout, â€œInvestigations on surface quality characteristics with multi-response parametric optimization and correlationsâ€,Alexandria engineering Journal, Elsevier, 55, 1625-1663, 2016.
Amlana Panda, Ashok Kumar Sahoo, Arun Kumar Rout, â€œMulti-attribute decision making parametric optimization and modeling in hard turning using ceramic insert through grey relational analysis: A case study,â€ Decision Science Letters, 5, 581-592, 2016
Arun kumar Rout, Jnanaranjan Kar, Dipak Kumar Jesthi and Alekh Kumar Sutar, â€œEffect of surface treatment on the physical, chemical and mechanical properties of palm tree leaf stalk fibers.â€Bio resources, 11(2), 4432-4445, 2016.
Arun Kumar Rout ,Alok Satapathy, â€œStudy on mechanical and erosion wear performance of granite filled glass-epoxy hybrid composites Proc IMechE Part Lâ€,Journal of Materials Design and Applications, 229(1), 38 â€“ 50 ,2015.
Sucharita S Sahoo , Arun Kumar Rout, â€œPrediction of erosion wear of granite filled jute epoxy composites using artificial neural networkâ€, Composites: Mechanics, Computations, Applications, An International Journal ,6(3) ,1-13 ,2015.
A. Praharaj, D. Behera, P. Rath, T.K. Bastia , A.K.Rout , â€œBisGMA-polyvinylpyrrolidone blend based nanocomposites reinforced with chitosan grafted f-multiwalled carbon nanotubesâ€, Results in Physics ,5 ,158-167 , 2015
A. Praharaj, D. Behera, P. Rath, T.K. Bastia , A.K.Rout , â€œBisGMA/EPDM/amine functionalized MWCNTs based nanocomposites Pigment & Resin Technologyâ€, Emerald ,44(5) ,266-275 ,2015
Ashok Kumar Sahoo, Arun Kumar Rout and Dipti Kanta Das , â€œResponse surface and artificial neural network prediction model and optimization for surface roughness in machining â€œ,Int. Journal of Industrial Engineering Computations ,6 ,229-240 ,2015
Arun Kumar Rout & Subhrajit Ray , â€œA comparative study of the mechanical properties of glass-polyester composites filled with industrial wastesâ€ ,Composites: Mechanics, Computations, Applications,An International Journal , 5(2) , 1-14, 2014
A.K. Sahoo, S. Pradhan , A.K. Rout , â€œDevelopment and machinability assessment in turning Al/SiC-metal matrix composites with multi layer coated carbide insert using Taguchi and statistical techniques â€œ,Archives of Civil and Mechanical Engineering ,13 ,27-35 ,2013
Arun Kumar Rout & Alok Satapathy, â€œComputational and Experimental Investigation on Thermal Insulation Capabilities of Rice-Husk Filled Epoxyâ€ ,Composites ,Computational thermal Science ,4(2) ,107-114 ,2012
Arun Kumar Rout & Alok Satapathy , â€œAnalysis of Dry Sliding Wear Behaviour of Rice Husk Filled Epoxy Composites Using Design of Experiment and ANNâ€ , Procedia Engineering , 38 ,1218-1232 ,2012.
Arun Kumar Rout, Alok Satapathy, Sisir Mantry, Ashok K Sahoo and Tanmay Mohanty , â€œErosion Wear Performance Analysis of Polyester- GF-Granite Hybrid Composites using the Taguchi Methodâ€ , Procedia Engineering ,38 , 1863-1882 ,2012
Arun Kumar Rout & Alok Satapathy , â€œDevelopment and Characterization of Rice Husk Filled Glass Fiber Reinforced Epoxy Bio-Compositesâ€ , Composites: Mechanics, Computations, Applications,An International Journal. 3(2) ,1-12 ,2012
Arun Kumar Rout & Alok Satapathy , â€œStudy on Mechanical and Tribo-Performance of Rice-husk Filled Glass-Epoxy Hybrid Composites , Materials and Designâ€ , 41 ,131-141, 2012
S Sethy,J Rana and S K Sethi, “Performance analysis of EDM process using multi response optimization techniques”,National Conference on Technological Advancement in Manufacturing & Processing of New Materials(TAMPNM-2016),VSSUT,Burla,Odisha,9th-10th Apr,2016.
S K Sethi and S Paramita, “Network Technology Trend For Next Generation Wireless Communication”, National Conference on Recent Advancement in Electronics (NCRAE-2016), Faculty of Science & Technology, IFHE University, Hyderabad, 22nd-23rd Jan, 2016.
S K Sethi, B Pradhan and A Kumar, “An Integrated approach of Information and Communication Technology resources and Big Data Analytics for Disaster Management system”, NISAR Science Applications Workshop, Space Application Centre, Ahmedabad,19th â€“ 20th Nov,2015.
S K Sethi,S K Sahu and G Sahu, “A Novel MCCE Method for Performance Analysis of MIMO Receiver”,International Conference On Computation of Power,Energy, Information and Communication(ICCPEIC-2014),Adhiparasakhti Engineering College, Melmaruvathur, Tamilnadu,16th â€“ 17th Apr,2014.
P K Nayak, S Padhi and S K Sethi, “Performane Analysis of Smart Antenna Using Beam Forming Techniques”, International Conference on Innovative Trends in Electrical, Power Control, Electronics and Communication Engineering (EPCECE â€“ 2014), Jawaharlal Nehru University, New Delhi, 18th â€“ 19thJan, 2014
S K Sethi,G. Sahu and J S Kalia ,“MIMO:-A Gateway To Increase Channel Capacity” International Symposium on Computing Control & Instrumentation Application (ISCCIA-2011),BEC,Bhubaneswar,23rd -25th Dec,2011
J S Kalia,G Sahu and S K Sethi , “Meta Structured Compact Antenna for Wireless-Fidelity”, International Symposium on Computing Control & Instrumentation Application(ISCCIA-2011),BEC,Bhubaneswar,23rd -25th Dec,2011
Arunanshu Mahapatro and Ajit Kumar Panda. Choice of Detection Parameters on Fault Detection in Wireless Sensor Networks: A Multiobjective Optimization Approach. Wireless Personal Communication, Springer.vol. 78, no. 1, pp. 649â€“669, September-2014.
Arunanshu Mahapatro and Pabitra Mohan Khilar. Online Fault Diagnosis of Wireless Sensor Networks. Central European Journal of Computer Science, Springer.vol. 4, no. 1, pp. 30â€“44, March- 2014.
Arunanshu Mahapatro and Pabitra Mohan Khilar. Detection and Diagnosis of Node failure in Wireless Sensor Networks: A Multiobjective Optimization Approach. Swarm and Evolutionary Computation, Elsevier, vol. 13, pp. 74â€“84, December 2013.
Arunanshu Mahapatro and Pabitra Mohan Khilar. Mobility Adaptive Unequal Cluster-basedÂ Routing Protocol in Wireless Sensor Networks. International Journal of Sensor Networks, vol. 14, no. 2, pp. 65 â€“ 81, September-2013.
Arunanshu Mahapatro and Pabitra Mohan Khilar. Online Distributed Fault Diagnosis in Wireless Sensor Networks. Wireless Personal Communication, Springer,vol. 71, no. 3, pp. 1931-1960, August 2013.
Arunanshu Mahapatro and Pabitra Mohan Khilar. Mobility Aware Distributed Diagnosis of Mobile Ad Hoc Sensor Networks. Networking Science, Springer, vol. 2, no. 1-2, pp. 52â€“65, May-2013.
Arunanshu Mahapatro and Pabitra Mohan Khilar. Fault Diagnosis in Wireless Sensor Networks: A Survey. IEEE Communications Surveys and Tutorials, IEEE, vol. 15, no. 4, pp. 2000 â€“ 2026, March-2013.
Arunanshu Mahapatro and Pabitra Mohan Khilar. An Energy-Efficient Distributed Approach for Clustering-Based Fault Detection and Diagnosis in Image Sensor Networks. IET Wireless Sensor Systems, IET, vol. 3, no. 1, pp. 26â€“36, March-2013.
Arunanshu Mahapatro and Pabitra Mohan Khilar. Fault Diagnosis in Body Sensor Networks. International Journal of Computer Information Systems and Industrial Management Applications. vol. 5, pp. 252â€“259, 2012.
Arunanshu Mahapatro and Pabitra Mohan Khilar. Detection of Node Failure in Wireless Image Sensor Networks . ISRN Sensor Networks, Hindawi Publishing Corporation, vol. 2012, pp. 1 â€“ 8, 2012.
Arunanshu Mahapatro and Pabitra Mohan Khilar. An Adaptive Approach to Discriminate the Persistence of Faults in Wireless Sensor Networks. ISRN Sensor Networks, Hindawi Publishing Corporation,Â vol. 2012, pp. 77 â€“ 89, 2012.
Arunanshu Mahapatro and Pabitra Mohan Khilar. On-line Fault diagnosis of Arbitrary Connected Networks . ACEEE International Journal on Network Security. vol. 3, no. 1, pp. 10â€“13, 2012.
S. Sarangi, N. P. Rath and H. K. Sahoo, "A Comparative Study of Filters for Denoising Mammograms," 2021 International Conference on Intelligent Technologies (CONIT), Hubli, India, 2021, pp. 1-5, doi: 10.1109/CONIT51480.2021.9498526.
R. N. Patro, H. K. Sahoo and P. K. Biswal, "Dual Histogram Based RVIN detector and Hybrid Gaussian Filter," 2021 IEEE 4th International Conference on Computing, Power and Communication Technologies (GUCON), Kuala Lumpur, Malaysia, 2021, pp. 1-8, doi: 10.1109/GUCON50781.2021.9573672
H.K.Sahoo et al., "INGR Roadmap Massive MIMO Chapter," 2022 IEEE Future Networks World Forum (FNWF), Montreal, QC, Canada, 2022, pp. 1-51, doi: 10.1109/FNWF55208.2022.00138
H. K.Sahoo et al., "INGR Roadmap Massive MIMO Chapter," 2023 IEEE Future Networks World Forum (FNWF), Baltimore, MD, USA, 2023, pp. 1-70, doi: 10.1109/FNWF58287.2023.10520592.
L. Ghadei and H. K. Sahoo, "BER Performance Analysis For Outdoor Wireless Channels Using Low Complexity Neural Equalizer," 2024 IEEE 3rd International Conference on Control, Instrumentation, Energy & Communication (CIEC), Kolkata, India, 2024, pp. 367-371, doi: 10.1109/CIEC59440.2024.10468249
Umamani Subudhi, Harish Kumar Sahoo, "Adaptive estimation of sequence components for three-phase unbalanced system using fractional LMS/F algorithm" , Springer Electrical Engineering, Volume 104, pages 1757–1768, 2022
Swetaleena Sahoo, Harish Kumar Sahoo, Sarita Nanda, "Energy efficient equalizer design for MIMO OFDM communication systems using improved split complex extreme learning machine", Springer Signal, Image and Video Processing,Volume 16, pp. 349–357, 2022
Madhusmita Sahoo, Harish Kumar Sahoo, "Performance Analysis of 5 G Wireless Hybrid Precoding Using Evolutionary Algorithms", Springer Journal of Bionic Engineering, Volume 20, pp. 2317–2330, 2023
Swetaleena Sahoo, Manidipa Sarkar, Harish Kumar Sahoo & Sarita Nanda, "Multiuser hybrid precoder design using logarithmic hyperbolic filtering for millimeter wave communication systems", Volume 30, pp.139–150, 2024
Madhusmita Sahoo, Harish Kumar Sahoo, "Optimal multiuser uplink data detection for 5G communication networks", Springer International Journal of Information Technology, Volume 16, pp. 1407–1418, 2024
PK Ray, HK Sahoo, A Mohanty, J khan Bhutto, ABA Barnawi, AA Alshaya, "Robust H-infinity Filter and PSO-SVM Based Monitoring of Power Quality Disturbances system" IEEE Access, DOI: 10.1109/ACCESS.2024.3367727
S.Sarangi,N.P. Rath, H.K.Sahoo, "Mammogram Mass Segmentation and Detection using Legendre Neural Network based Optimal Threshold" Accepted in Springer Medical & Biological Engineering & Computing, 2021
Patro, R. N., Subudhi, S., Biswal, P. K., Dell’Acqua, F., & Sahoo, H. K. (2021). Error removal by energy scaling from hyperspectral images for performance improvement of spectral classifiers. International Journal of Remote Sensing, 42(20), 7863–7879. https://doi.org/10.1080/01431161.2021.1966851
B. Mohanty, H.K.Sahoo, â€œEfficient Beamformer for Low Mobility Indoor Communication Using Sparse Adaptive Algorithmâ€, Springer Wireless Personal Communications,vol.116, issue 5 pages1621â€“1637,2021, 10.1007/s11277-020-07752-x
B. Mohanty, H.K.Sahoo, B.Patnaik, â€œWireless channel estimation and beamforming by using block sparse adaptive filteringâ€, Springer Signal, Image and Video Processing, 2020,https://doi.org/10.1007/s11760-020-01795-0
Ram Narayan Patro, Subhashree Subudhi, Pradyut Kumar Biswal, FabioDellâ€™Acqua , Harish Kumar Sahoo, "Conditional nearest regularized subspace classifiers: a fast classification approach for HSI" International Journal of Remote Sensing(Taylor and Francis), vol. 40, issue 24,2019, https://doi.org/10.1080/01431161.2019.1629717
B.Mohanty,Harish K. Sahoo, and B.Patnaik, "Block NLMS/F Equalizer Design and Channel Capacity Analysis for Indoor IEEE 802.11 Fading Wireless Channels", Springer Signal, Image and Video Processing, vol.13,pp. 693-701, 2019, DOI: 10.1007/s11760-018-1398-2
Harish K. Sahoo, B.Mohanty and B.Patnaik, "Block and Fast Block Sparse Adaptive Filtering for Outdoor Wireless Channel Estimation and Equalization", Springer Wireless Personal Communications,vol. 98,issue 3, pp.3003-3019, 2018
U.Subudhi , Harish K. Sahoo and Sajeev K. Mishra, â€œHarmonics and Decaying DC Estimation Using Volterra LMS/F Algorithmâ€ IEEE Transactions on Industry Applications,vol. 54,issue 2, pp.1108-1118, Mar-Apr 2018
U.Subudhi , Harish K. Sahoo and Sajeev K. Mishra, " Tracking of power quality disturbances using sparse modelâ€“based extended Kalman filters", International Journal of Adaptive Control and Signal Processing(Wiley), vol. 32,issue 10, pp. 1489-1507, Oct. 2018
H.K. Sahoo and P.K. Dash, â€œTracking of non-stationary distorted power signals using complex Hâˆž filterâ€, Inderscience International Journal of Automation and Control, vol. 5,pp. 22-43,2011
H.K. Sahoo ,P.K. Dash and N.P. Rath, â€œFrequency estimation of distorted non-stationary signals using complex Hâˆž filterâ€, Elsevier, International Journal of Electronics and Communications, vol. 66,pp.267-274,2012
H.K. Sahoo, P.K. Dash and N.P. Rath, â€œNARX model based nonlinear dynamic system identification using low complexity neural networks and robust Hâˆž filterâ€ Elsevier Applied Soft Computing, vol. 13, pp.3324-3334, 2013
Harish K. Sahoo and P.K. Dash, â€œRobust Estimation of Power quality disturbances using unscented Hâˆž filterâ€, Elsevier International journal of Electrical Power & Energy Systems, vol. 73, pp.438-447, 2015
Verma, B.B., Mallik, Manila, Atkinson, John D, Ray, Prabal Kumar, (2012), Fatigue Crack Initiation and Growth Behavior of 7475 Aluminium Alloy in Air and Aggressive Environment Advanced Materials Research, Advanced Materials Research, Vol. 428, pp. 133-136, DOI: 10.4028/www.scientific.net/AMR-428 428.133.
Mallik, Manila, Mitra, Arijit , Sengupta, Srijan, Das, Karabi, Ghosh, Rabindra N. , and Das, Siddhartha , (2014), Effect of Current Density on the Nucleation and Growth of Crystal Facets during Pulse Electrodeposition of Snâ€“Cu Lead-Free Solder, Crystal Growth & Design,Vol. 14 (12), pp.6542â€“6549,DOI:10.1021/cg501440a.
Mitra,Arijit, Mallik, Manila, Sengupta, Srijan, BanthiaSwastika, Das Karabi, and Das Siddhartha, (2017), Effect of Anodic Passivation at High Applied Potential Difference on the Crystal Shape and Morphology of Copper Electrodeposits: Thermodynamics and Kinetics of Electrocrystallization, Crystal Growth & Design, Vol.17 (4), pp.1539â€“1549. DOI:10.1021/acs.cgd.6b01420.
Sengupta, Srijan, Mitra, Arijit, Dahiya, Prem P., Kumar, Abhinav, Mallik, Manila, Das Karabi, Majumder,S.B. , Das,Siddhartha, (2017), Investigation on lithium conversion behavior and degradation mechanisms in Tin based ternary component alloy anodes for lithium ion batteries, Journal of alloys and compound, Journal of alloys and compound, Vol. 721, pp.236-248, DOI: 10.1016/j.
Banthia, Swastika, Sengupta, Srijan, Mallik, Manila, Das Siddhartha, and Das, Karabi (2017), Substrate effect on electrodeposited copper morphology and crystal shapes, Surface Engineering,pp.1-8. DOI:10.1080/02670844.2017.1321265.
B. B. Verma, M. Mallik, J. D. Atkinson, and P. K. Ray “Fatigue Crack Initiation and Growth behavior of 7475 Aluminum Alloy in Air and Aggressive Environment” Advanced Material Research volume 428(2012):133-136.
Manila Mallik, Arijit Mitra, Srijan Sengupta, Karabi Das, Rabindra N. Ghosh, and Siddhartha Das “Effect of Current density on the Nucleation and Growth of Crystal Facet during Pulse Electro deposition of Sn-cu lead free solder” Crystal growth and Design 14 (2014): 6542âˆ’6549.
Rao, M.M., Parhi, S. K., Dwibedy, S., Patro, S. K. (2026). Multicriteria decision making guided optimization of recycled HDPE fiber content for sustainable utilization in concrete. Journal of Materials in Civil Engineering, American Society of Civil Engineers (SCIE, IF-3), https://doi.org/10.1061/JMCEE7.MTENG-21923
Parhi, S. K., Patro, S. K. (2025). Data-driven prediction and intelligent optimization of strength, porosity and cost of concrete with supplementary cementitious materials. Journal of Structural Integrity and Maintenance, Taylor & Francis (ESCI, IF-3.1), Vol. 10 (4), pp. 2567084. https://doi.org/10.1080/24705314.2025.2567084
Mishra, J., Soren, S., Nanda, B, Patro, S. K. (2025). Compressive strength and durability analysis of geopolymer concrete manufactured with rice husk ash-derived alkaline activator. Journal of Material Cycles and Waste Management, Springer (SCIE, IF-3.0), Vol 27, pp. 4573–4587, https://doi.org/10.1007/s10163-025-02384-4
Mishra, J., Mohapatra, S.S., Nanda, B, Patro, S. K. (2025). Compressive Strength and Microstructural Properties of Geopolymer Binder Manufactured with Rice Husk Ash-Based Alkaline Activator at Room Temperature. Waste and Biomass Valorization, Springer (SCIE, IF-3.2), https://doi.org/10.1007/s12649-025-03193-4
Parhi, S. K., Patro, S. K. (2025). Interfacial Insights and Remediation Strategies through Molecular Dynamics Probing of Nanoparticle Interactions in Cementitious Matrices: A Review. Langmuir, American Chemical Society (SCIE, IF-3.9), Vol. 41 (26), pp. 16687-16713. https://doi.org/10.1021/acs.langmuir.5c01813
Parhi, S. K., Dwibedy, S., Patro, S. K. (2025). Managing waste for production of low-carbon concrete mix using uncertainty-aware machine learning model. Environmental Research, Elsevier (SCIE, IF-7.7), Vol. 279 (Part-2), pp. 121918. https://doi.org/10.1016/j.envres.2025.121918
Mohanty, T., Acharya, P. K., Patro, S. K., Saha, P., Khan A. M. (2024). Chemical and mechanical resistance of concrete containing ferrochrome slag aggregates. Indian Concrete Journal, (Scopus), Vol. 98(9), pp. 1-12.
Parhi, S. K., Patro, S. K. (2024). Parametric Analysis and Prediction of Geopolymerization Process. Materials Today Communications, Elsevier (SCIE, IF-3.7), Vol. 41, pp. 111047. https://doi.org/10.1016/j.mtcomm.2024.111047
Nanda, B., Mishra, J., Patro, S. K. (2024). Synthesis of Rice Husk Ash based Alkaline Activators for Geopolymer Binder Systems: A Review. Journal of Building Engineering, Elsevier (SCIE, IF-6.7), Vol. 91, pp. 109694. https://doi.org/10.1016/j.jobe.2024.109694
Ijmulwar, S. S., Patro, S. K. (2024). Seismic design of reinforced concrete buildings equipped with viscous dampers using simplified performance-based approach. In Structures, Elsevier (SCIE, IF-3.9), Vol. 61, pp. 106020. https://doi.org/10.1016/j.istruc.2024.106020
Mishra, J., Nanda, B., Patro, S. K., & Krishna, R. S. (2024). A comprehensive review on compressive strength and microstructure properties of GGBS-based geopolymer binder systems. Construction and Building Materials, Elsevier (SCIE, IF-7.4), Vol. 417, pp. 135242. https://doi.org/10.1016/j.conbuildmat.2024.135242
Acharya, P. K., & Patro, S. K. (2024). Strength, Wear-Resistance, Degree of Hydration, Energy and Carbon Performance of Concrete Using Ferrochrome Waste Materials. Iranian Journal of Science and Technology, Transactions of Civil Engineering, Springer (SCIE, IF-1.7), Vol. 48(1), pp. 353-362.
Das, S. K., Behera, N., Patro, S. K., Mustakim, S. M., Suda, Y., & Leklou, N. (2024). Effectiveness of rice husk ash-derived alkali activator in fresh, mechanical, and microstructure properties of geopolymer mortar at ambient temperature curing. Journal of Sustainable Cement-Based Materials, Taylor & Francis (SCIE, IF-4.7), Vol. 13(2), pp. 213-221. https://doi.org/10.1080/21650373.2023.2262465
Parhi, S. K., & Patro, S. K. (2024). Application of R-curve, ANCOVA, and RSM techniques on fracture toughness enhancement in PET fiber-reinforced concrete. Construction and Building Materials, Elsevier (SCIE, IF-7.4), Vol. 411, pp. 134644. https://doi.org/10.1016/j.conbuildmat.2023.134644
Parhi, S. K., & Patro, S. K. (2024). Compressive strength prediction of PET fiber-reinforced concrete using Dolphin echolocation optimized decision tree-based machine learning algorithms. Asian Journal of Civil Engineering, Springer (Scopus), Vol. 25(1), pp. 977-996. https://doi.org/10.1007/s42107-023-00826-8
Acharya, P. K., & Patro, S. K. (2023). Structural characteristics of reinforced concrete beams made of waste materials from ferrochrome industry. Indian Concrete Journal, (Scopus), Vol. 97(7), pp. 31-40.
Das, S. K., Nayak, M. K., Patro, S. K., & Suda, Y. (2023). Durability Properties of Ambient Cured Geopolymer Mortar Made from Rice Husk Ash–Based Alkali Activator: A Comparative Study with Conventional Alkali Activator. Advances in Civil Engineering Materials, ASTM, (Scopus, Emerging sources citation, WoS, IF-1.4), Vol. 12(1), pp. 314-328. https://doi.org/10.1520/ACEM20230069
Dash, P. K., Parhi, S. K., Patro, S. K., & Panigrahi, R. (2023). Influence of chemical constituents of binder and activator in predicting compressive strength of fly ash-based geopolymer concrete using firefly-optimized hybrid ensemble machine learning model. Materials Today Communications, Elsevier (SCIE, IF-3.7), Vol. 37, pp. 107485. https://doi.org/10.1016/j.mtcomm.2023.107485
Singh, S., Patro, S. K., & Parhi, S. K. (2023). Evolutionary optimization of machine learning algorithm hyperparameters for strength prediction of high-performance concrete. Asian Journal of Civil Engineering, Springer (Scopus), Vol. 24(8), pp. 3121-3143. https://doi.org/10.1007/s42107-023-00698-y
Dash, P. K., Parhi, S. K., Patro, S. K., & Panigrahi, R. (2023). Efficient machine learning algorithm with enhanced cat swarm optimization for prediction of compressive strength of GGBS-based geopolymer concrete at elevated temperature. Construction and Building Materials, Elsevier (SCIE, IF-7.4), Vol. 400, pp. 132814. https://doi.org/10.1016/j.conbuildmat.2023.132814
Parhi, S. K., & Patro, S. K. (2023). Prediction of compressive strength of geopolymer concrete using a hybrid ensemble of grey wolf optimized machine learning estimators. Journal of Building Engineering, Elsevier (SCIE, IF-6.7), Vol. 71, pp. 106521. https://doi.org/10.1016/j.jobe.2023.106521
Acharya, P. K., & Patro, S. K. (2023). Evaluation of environmental disturbance indicator using functional performance and life cycle assessment of ferrochrome waste concrete. Journal of Building Engineering, Elsevier (SCIE, IF-6.7), Vol. 65, pp. 105788. https://doi.org/10.1016/j.jobe.2022.105788
Rao, M. M., Patro, S. K., & Acharya, P. K. (2023). Utilisation of plastic waste as synthetic fiber and aggregate in concrete–a review. The Open Civil Engineering Journal, (Scopus), 17. https://doi.org/10.2174/18741495-v17-e230113-2022-HT31-3975-4
Mohanty, T., Kumar, A., Acharya, P. K., Patro, S. K., & Saha, P. (2022). Performance of structural geopolymer concrete utilising ferrochrome ash and fly ash as source material. Journal of The Institution of Engineers (India): Series A, Springer (Scopus), Vol. 103(4), pp. 1183-1194. https://doi.org/10.1007/s40030-022-00681-x
Acharya, P. K., & Patro, S. K. (2022). Evaluation of functional, microstructural, environmental impact, and economic performance of concrete utilizing ferrochrome ash and slag. Journal of Sustainable Metallurgy, Springer (SCIE, IF-2.5), Vol. 8(4), pp. 1573-1589. https://doi.org/10.1007/s40831-022-00587-9
Mishra, J., Nanda, B., Patro, S. K., & Krishna, R. S. (2022). Sustainable fly ash based geopolymer binders: a review on compressive strength and microstructure properties. Sustainability, MDPI (SCIE, IF-3.3), Vol. 14(22), pp. 15062. https://doi.org/10.3390/su142215062
Rao, M. M., Patro, S. K., & Basarkar, S. S. (2022). Mechanical and post-cracking performance of recycled high density polyethylene fiber reinforced concrete. Journal of The Institution of Engineers (India): Series A, Springer (Scopus), Vol. 103(2), pp. 519-530. https://doi.org/10.1007/s40030-022-00625-5
Mishra, J., Nanda, B., Patro, S. K., Das, S. K., & Mustakim, S. M. (2022). Influence of ferrochrome ash on mechanical and microstructure properties of ambient cured fly ash-based geopolymer concrete. Journal of Material Cycles and Waste Management, Springer (SCIE, IF-2.7), Vol. 24(3), pp. 1095-1108. https://doi.org/10.1007/s10163-022-01381-1
Dash, M. K., Patro, S. K., Acharya, P. K., & Dash, M. (2022). Impact of elevated temperature on strength and micro-structural properties of concrete containing water-cooled ferrochrome slag as fine aggregate. Construction and Building Materials, Elsevier (SCIE, IF-7.4), Vol. 323, pp. 126542. https://doi.org/10.1016/j.conbuildmat.2022.126542
Mishra, J., Nanda, B., Patro, S. K., Das, S. K., & Mustakim, S. M. (2022). Strength and microstructural characterization of ferrochrome ash-and ground granulated blast furnace slag-based geopolymer concrete. Journal of Sustainable Metallurgy, Springer (SCIE, IF-2.5), Vol. 8, 156-169. https://doi.org/10.1007/s40831-021-00469-6
Tiwary, K., Patro, S. K., Gandomi, A. H., & Sahoo, K. S. (2022). Model updating using causal information: a case study in coupled slab. Structural and Multidisciplinary Optimization, Springer (SCIE, IF-3.6), Vol. 65(2), pp. 62. https://doi.org/10.1007/s00158-021-03166-w
Krishna, R. S., Mishra, J., Nanda, B., Patro, S. K., Adetayo, A., & Qureshi, T. S. (2021). The role of graphene and its derivatives in modifying different phases of geopolymer composites: A review. Construction and Building Materials, Elsevier (SCIE, IF-7.4), Vol. 306, pp. 124774. https://doi.org/10.1016/j.conbuildmat.2021.124774
Acharya P. K. and Patro S. K., â€œFlexural Behavior of Reinforced Cement Concrete Beams Made With Air-Cooled Ferrochrome Slag Coarse Aggregateâ€, Indian Concrete Journal, February, 2021
Moharana R. and Patro S. K., â€œSeismic response of sliding isolated soft story building using velocity dependent friction modelâ€, ISET Journal of Earthquake Technology, Vol 56 (3), 2019, pp.77-95
Pattanaik S. C., Gopalkrishnan E., Ahmad M. and Patro S. K., â€œPetrographic investigation to assess condition of concrete exposed to fire, Indian Concrete Journal, August, 2019, pp 57-66
Banerjee S., Patro S. K. , â€œInelastic Seismic Response of Building with Friction Damper â€, Journal of The Institution of Engineers (India): Series A, DOI 10.1007/s40030-016-0184-9, 2016, (Springer)
Acharya P. K., Patro S. K. And Moharana N. C. â€œEffect of Lime on Mechanical and Durability Properties of Blended Cement Based Concreteâ€, Journal of the Institution of Engineers (India): Series A, Vol. 97(2), 2016, pp 71â€“79. (Springer).
Sahoo S. K., Mohapatra B. G., Patro S. K., and Acharya P.K. â€œEvaluation of graded layer in ground granulated blast furnace slag based layered concreteâ€, Construction and Building Materials, Vol 276, 2021
Dash M. K., and Patro S. K. â€œPerformance assessment of ferrochrome slag as partial replacement of fine aggregate in concreteâ€, European Journal of Environmental and Civil Engineering, DOI: 10.1080/19648189.1539674, 2018
Dash M. K., and Patro S. K. â€œEffects of water cooled ferrochrome slag as fine aggregate on the properties of concreteâ€, Construction and Building Materials, Vol 177, 2018, pp.457-466
Das S, Saha P. C, and Patro S. K. â€œSeismic protection of the benchmark highway bridge with passive hybrid control systemâ€, Earthquakes and Structures, Vol. 15, No. 3 (2018), pp. 227-241
Acharya P. K. and Patro S. K., â€œBond, Permeability and Acid Resistance Characteristics of Ferrochrome Waste Concreteâ€, ACI Materials, Vol. 115 (3), 2018, pp 359-368
Prusty J. K., Patro S. K.andMohanty T., â€œStructural Behaviour of Reinforced Concrete Beams Made with Ferrochrome Slag as Coarse Aggregateâ€, KSCE Journal of Civil Engineering, DOI 10.1007/s12205-017-1294-2, 2017, (Springer)
Acharya P. K. and Patro S. K. â€œStrength, Sorption and Abrasion Characteristics of Concrete using Ferrochrome Ash (FCA) And Lime as Partial Replacement of Cementâ€, Cement and Concrete Composites, Vol. 74, 2016, pp 16-25. (Elsevier)
Saha A, Saha P. C, and Patro S. K., â€œPolynomial Friction Pendulum Isolators (PFPIs) for Seismic Performance Control of Benchmark Highway Bridgeâ€, Earthquake Engineering and Engineering Vibration, Vol. 16, 2017,pp 827-840(Springer).
Acharya P. K. and Patro S. K. â€œFlexural behaviour of ferrochrome ash concrete beamsâ€, Indian Concrete Journal, Vol. 90, July 2016. (Special issue-sustainability).
Pattanaik S. C., Gopalkrishnan E., and Patro S. K., â€œA Study of deterioration of Reinforced Cement Concrete Structures in Mumbaiâ€, Indian Concrete Journal, Vol. 89(5), 2015, pp 51-58.
Patro S. K., Selvam R. P. and Bosch H., â€œBridge Flutter Modeling using h-adaptive FEMâ€, Journal of Wind and Engineering,Vol. 7, No. 2, July 2010, pp 39-48.
Patro S. K. and Sinha R., â€œSeismic Performance of Dry-Friction Energy Dissipation Devices in Shear-Frame Buildingsâ€, Journal of Structural Engineering, SERC, Vol. 36, No. 2, June â€“ July 2009,pp 114-121.
Swain S. S. and Patro S. K. and Sinha R. â€œNumerical Methodology for Dynamic Analysis of Buildings with Friction Dampersâ€, Bulletin of the New Zealand Society for Earthquake Engineering, Vol. 49(3), 2016, pp 245-266
Prusty J. K., Patro S. K. and Basarkar S. S. “Concrete using Agro-waste as Fine Aggregate for Sustainable Built Environment-A Review”, International Journal of Sustainable Built Environment (2016), Accepted for publication. (Elsevier).
Acharya P. K. and Patro S. K “Utilization of ferrochrome wastes such as ferrochrome ash and ferrochrome slag in concrete manufacturing”, Waste Management Research (2016), DOI: 10.1177/0734242X16654751. (Sage).
Das S, Saha P. C, and Patro S. K. “Vibration-based damage detection techniques used for health monitoring of structures: a review” Journal of Civil Structural Health Monitoring (2016), DOI 10.1007/s13349-016-0168-5. (Springer).
Acharya P. K. and Patro S. K. “Acid Resistance, Sulphate Resistance And Strength Properties of Concrete Containing Ferrochrome Ash (FA) And Lime”, Construction and Building Materials, Vol. 120, 2016, pp 241-250. (Elsevier).
Dash M. K., Patro S. K. and Rath A. K. â€œSustainable Use of Industrial-waste as Partial Replacement of Fine Aggregate for Preparation of Concrete - A Reviewâ€, International Journal of Sustainable Built Environment (2016), (Elsevier).
Dash M. K., Patro S. K. and Rath A. K. “Sustainable Use of Industrial-waste as Partial Replacement of Fine Aggregate for Preparation of Concrete - A Review”, International Journal of Sustainable Built Environment (2016), http://dx.doi.org/10.1016/j.ijsbe.2016.04.006 (in press) (Elsevier).
Saha A, Saha P. C, and Patro S. K., “Seismic response control of benchmark highway bridge using non-linear FV spring damper”, The IES Journal Part A: Civil and Structural Engineering, Vol. 8(4), 2015, pp 240-250. (Taylor & Francis).
Acharya P. K. and Patro S. K., “Effect of lime and ferrochrome ash (FA) as partial replacement of cement on strength, ultrasonic pulse velocity and permeability of concrete”, Construction and Building Materials, Vol. 94, 2015, pp 448-457. (Elsevier).
Prusty J. K. and Patro S. K., “Properties of Fresh and Hardened Concrete using Agro-waste as Partial Replacement of Coarse Aggregate â€“ A Review”, Construction and Building Materials, Vol. 82, 2015, pp 101-113. (Elsevier).
Mohapatra B. G., Sahoo S. K., Patro S. K., Paikaray B., “Failures in Raft Foundation-A case study”, International Journal of 3R’s , Vol. 5(2), 2014, pp 707-710.
Banerjee S., Patro S. K. and Rao P., “Inelastic seismic analysis of reinforced concrete frame building with soft storey”, International Journal of Civil Engineering Research, Vol. 5 (4), 2014.
Banerjee S., and Patro S. K., â€œEstimation of the Park-Ang Damage Index for Floating Column Building with Infill Wallâ€, International Journal of Civil, Architectural, Structural and Construction Engineering, Vol. 8 (6), 2014, pp 760-763.(World Academy of Science).
Patro S. K., Mohanty T., and Mohanty M. K., “Use of Ferro-Chrome (FeCr) Slag as Aggregate in Concrete”, International Journal of 3R’s, Vol. 4(4), 2013.
Patro S. K., Selvam R. P. and Bosch H, “Adaptive h-finite element modelling of wind flow around bridges”, Engineering Structures, Vol. 48, 2013, pp 569-577. (Elsevier).
Patro S. K. Sinha R., “Seismic Performance of Dry-Friction Devices in Shear-Frame Buildings”, Journal of Civil Engineering and Architecture, Vol. 4, No.12, 2010, pp 01-19.
Patro S. K. and Sinha R., “Influence of Friction Models on Aseismic Performance of Buildings with Dry-friction Devices”, International Journal of Engineering Uncertainty: Hazards, Assessment and Mitigation, Vol. 2, No. (3-4), 2010, pp 99-113.
Giri, D. (2014) “Pseudo-dynamic approach of passive earth pressure behind cantilever retaining wall with inclined back-fill” Journal of Geomechanics and Geoengineering,9(1),72-78.
Giri, D. (2011) “ Pseudo-dynamic approach of active earth pressure behind cantilever retaining wall with inclined back-fill” Journal of Geomechanics and Engineering, 3(4), 255-266.
Sengupta, A., Giri, D. (2011) “Dynamic analysis of soil-nailed Slope”, Ground Improvement, 164(GI14), 225-234.
Giri, D. and Sengupta, A. (2009) “Dynamic behavior of small scale nailed soil slopes” Journal of Geotechnical and Geological Engineering, 27(6), 687-698.
Giri, D. and Sengupta, A. (2010) “Dynamic Behavior of Small-Scale Model of Nailed Steep Slopes” Journal of Geomechanics and Geoengineering. 5(2), 99-108.
Giri, D. and Sengupta, A. (2009) “A Kinematic Limit Approach for the Stability Analysis of Nailed Soil Slopes” Asian Journal of Civil Engineering, 10(2), 163-176.
Giri, D. and Sengupta, A. (2010) “Dynamic Behaviour of Small-Scale Model Slopes in Shaking Table Tests” International Journal of Geotechnical Engineering, J. Ross Publishing Inc., 4(1), 1-11.
Prusty, S.R., Panigrahi, R. and Jena, S., 2023. Characterisation and life-cycle assessment of alkali-activated concrete using industrial wastes. International Journal of Environmental Science and Technology, pp.1-16.
Prusty, S.R., Behera, D., Panigrahi, R. and Jena, S., 2023. Improvement of Durability Aspects of CAC-Based Alkali-Activated Concrete. Iranian Journal of Science and Technology, Transactions of Civil Engineering, pp.1-19.
Jena, S. and Panigrahi, R., 2022. Study on the durability and microstructure of geopolymer concrete with ferrochrome slag and silica fume. International Journal of Structural Engineering, 12(3), pp.302-319.
Patra, S.N., Patra, R.K., Mukharjee, B.B. and Jena, S., 2022. Development of sustainable concrete incorporating metakaolin and sintered fly ash aggregate. Structural Concrete, 23(4), pp.2246-2259.
Jena, S. and Panigrahi, R., 2021. Evaluation of Durability and Microstructural Properties of Geopolymer Concrete with Ferrochrome Slag as Coarse Aggregate. Iranian Journal of Science and Technology, Transactions of Civil Engineering, pp.1-10.
Jena, S. and Panigrahi, R., 2021. Performance evaluation of sustainable geopolymer concrete produced from ferrochrome slag and silica fume. European Journal of Environmental and Civil Engineering, pp.1-17.
Jena, S. and Panigrahi, R., 2019. Performance assessment of geopolymer concrete with partial replacement of ferrochrome slag as coarse aggregate. Construction and Building Materials, 220, pp.525-537.
Jena, S. and Panigrahi, R., 2018. Parametric study on sustainable geopolymer concrete. International Journal of Sustainable Materials and Structural Systems, 3(3-4), pp.218-234.
Prusty, S. R., Jena, S. and Panigrahi, R., 2023. Assessment of acid and chloride resistance of ferrochrome slag-based geopolymer concrete. Indian concrete Journal.
Prusty, S. R., Jena, S. and Panigrahi, R., 2022. Fresh and hardened properties of Geopolymer concrete: A review. Indian concrete Journal.
Jena, S., Panigrahi, R. and Sahu, P., 2019. Mechanical and Durability Properties of Fly Ash Geopolymer Concrete with Silica Fume. Journal of The Institution of Engineers (India): Series A, pp.1-9.
Akash K. Naik, and Krishna P. Biligiri, “Predictive Models to Estimate Phase Angle of Asphalt Mixtures”, Journal of Materials in Civil Engineering, American Society of Civil Engineers, USA, Volume 27, Issue 8, August 2015, 04014235, pp. 1-13 (DOI: 10.1061/(ASCE)MT.1943-5533.0001197).
Sarmista Padhy, Akash Kumar Naik, “Moisture Susceptibility on Asphalt Mix and the Effect of Anti - Stripping Additives” International Journal of Science Engineering and Advance Technology, VOL 4, NO 12 (2016)pg no 728-735
BarshaBaishaliMalla, Akash Kumar Naik, “The Effect of Aggregate Gradation on Design Mix using Modified Bitumen” International Journal of Science Engineering and Advance Technology, VOL 4, NO12 (2016)pg no736-744
SCI JOURNAL PUBLICATIONS
S Panigrahi, SK Behera, PK Sethy (2021). Time Series Forecasting of Agricultural Products using Hybrid Methods. Applied Artificial Intelligence, Taylor Francis. https://doi.org/10.1080/08839514.2021.1981659 (SCI Indexed) (SCI Indexed)
PK Sethy*, SK Behera (2021). Categorization of Common Pigmented Skin Lesions (CPSL) using Multi-Deep Features and Support Vector Machine. Research Square: DOI: 10.21203/rs.3.rs-136988/v1. Journal of Digital Imaging, Springer (SCI Indexed) (Under Review)
PK Sethy*, SK Behera (2021). Automatic Classification with Concatenation of Deep and Handcrafted Features of Histological Images for Breast Carcinoma Diagnosis. Medical & Biological Engineering & Computing, Springer. (SCI Indexed) (Under Review)
PK Sethy*, SK Behera (2021). A Data Constrained Approach for Brain Tumour Detection using Fused Deep Features and SVM. Multimedia Tools and Applications, Springer. 10.1007/s11042-021-11098-2 (SCI Indexed)
SK Behera, AK Rath, PK Sethy* (2021). Fruits Yield Estimation using Faster R-CNN with MIoU. Multimedia Tools and Applications, Springer. https://doi.org/10.1007/s11042-021-10704-7 (SCI Indexed).
PK Sethy, C Pandey*, Dr. M.R. Khan, SK Behera, Vijaykumar K and S Panigrahi (2021). A Cost-Effective Computer-Vision Based Breast Cancer Diagnosis. Journal of Intelligent and Fuzzy Systems, IOS Press. DOI: 10.3233/JIFS-189848 (SCI Indexed).
PK Sethy*, SK Behera, A Komma, C Pandey and M.R. khan (2020). Computer aid screening of COVID-19 using X-ray and CT scan images: An inner comparison. Journal of X-Ray Science and Technology. 1 Jan.2021: 1 â€“ 14. DOI: 10.3233/XST-200784. (SCI Indexed)
PK Sethy, SK Behera*, N Kannan, S Narayanan, and C Pandey. â€œSmart Paddy Field Monitoring System Using Deep Learning and IoT.â€ Concurrent Engineering, (January 2021). https://doi.org/10.1177/1063293X21988944. (SCI Indexed)
SK Behera, PK Sethy, SK Sahoo, S Panigrahi, and SC Rajpoot. â€œOn-Tree Fruit Monitoring System Using IoT and Image Analysis.â€ Concurrent Engineering, (February 2021). https://doi.org/10.1177/1063293X20988395. (SCI Indexed)
S Panigrahi, R M Pattanayak, PK Sethy, SK Behera (2020). Sunspot Time Series Forecasting using a Hybrid Ensemble of ARIMA, ETS and SVM. Solar Physics 296, 6 (2021). https://doi.org/10.1007/s11207-020-01757-2 (SCI Indexed)
PK Sethy*, NK Barpanda, AK Rath, SK Behera (2020). Deep Feature Based Rice Leaf Disease Identification using Support Vector Machine. Computers and Electronics in Agriculture, Elsevier. https://doi.org/10.1016/j.compag.2020.105527. (SCI Indexed)
SK Behera, AK Rath, A Mahapatra, PK Sethy*(2020). Identification, classification & grading of fruits using machine learning & computer intelligence: a review. Journal of Ambient Intelligence and Humanized Computing. Springer. DOI: https://doi.org/10.1007/s12652-020-01865-8. (SCI Indexed)
PK Sethy*, NK Barpanda, AK Rath, SK Behera (2020). Nitrogen Deficiency Prediction of Rice Crop Based on Convolutional Neural Network. Journal of Ambient Intelligence and Humanized Computing. Springer. DOI: https://doi.org/10.1007/s12652-020-01938-8. (SCI Indexed)
NON-SCI JOURNAL PUBLICATIONS
PK Sethy*,S K Behera, Chanki Pandey (2021). Speech Command Recognition based on Deep Image Classification. International Journal of Speech Technology. (Scopus, ESCI Indexed) (Revision Submitted)
SK Behera, AK Rath, and PK Sethy*(2020). Fruit Recognition using Support Vector Machine based on Deep Features. Karbala International Journal of Modern Science; 6(2): 234-245. https://doi.org/10.33640/2405-609X.1675. (Scopus Indexed)
SK Behera, AK Rath, and PK Sethy*(2020). Maturity Status Classification of Papaya Fruits based on Machine Learning and Transfer Learning Approach. Information Processing in Agriculture, Elsevier. https://doi.org/10.1016/j.inpa.2020.05.003 (Scopus Indexed)
PK Sethy*, SK Behera, PK Ratha, P Biswas (2020). Detection of coronavirus (COVID-19) based on Deep Features and Support Vector Machine. International Journal of Mathematics, Engineering and Management Science; 5(4):643-651. DOI: https://doi.org/10.33889/IJMEMS.2020.5.4.052 (Scopus Indexed)
PK Sethy*, NK Barpanda, AK Rath, SK Behera (2020). Image Processing Techniques for Diagnosing Rice Plant Disease: A Survey. Procedia Computer Science, Elsevier; 167:516-530. DOI: https://doi.org/10.1016/j.procs.2020.03.308 (Scopus Indexed).
PK Sethy*, NK Barpanda, AK Rath, SK Behera (2020). Rice False Smut Detection based on Faster R-CNN. Indonesian Journal of Electrical Engineering and Computer Science;9(3). DOI: http://doi.org/10.11591/ijeecs.v19.i3.pp%25p (Scopus Indexed).
SK Behera, A Mahapatra, AK Rath, PK Sethy* (2019). Classification & Grading of Tomatoes using Image Processing Techniques. International Journal of Innovative Technology and Exploring Engineering;8(6s):545-550. (Scopus Indexed)
SK Behera*, A Pattnaik, AK Rath, NK Barpanda, PK Sethy (2019). Yield Estimation of Pomegranate Using Image Processing Techniques. International Journal of Innovative Technology and Exploring Engineering;8(6S):798-803. (Scopus Indexed)
SK Behera*, AK Rath, PK Sethy (2019). Automatic Fruits Identification and Disease Analysis using Machine Learning Techniques. International Journal of Innovative Technology and Exploring Engineering;8(6S2):103-107. (Scopus Indexed)
PK Sethy*, C Kumari, B Negi, SK Behera, NK Barpanda, AK Rath (2017). Identification of Mineral Deficiency in Rice Crop based on SVM in Approach of K-Means& Fuzzy C-Means Clustering. Helix (ISSN: 2319-5592); 7(5):1970-1983. (ESCI Indexed)
PK Sethy*, S Satpathy, GR Panigrahi, SK Behera (2019). Rice Grain Identification Model based on Bayesian Regularization of Artificial Neural Network using Geometrical Feature. International Journal of Emerging Technologies and Innovative Research (ISSN: 2349-5162); 6(5):538-542. Available: http://www.jetir.org/papers/JETIR1905682.pdf. (UGC Approved. Sl. No. 63975)
PK Sethy*, SK Behera, S Dash, A Pattnaik. (2019). Rice Quality Evaluation Based on Image Processing: A Survey. International Journal of Information Technology and Electrical Engineering; 8(5):26-34. ISSN: 2306-708X. (UGC CARE LIST- B GROUP).
SK Behera*, S Sangita, PK Sethy, AK Rath (2018). Image Processing Based Detection & Size Estimation of Fruit on Mango Tree Canopies. International Journal of Applied Engineering Research (ISSN 0973-4562); 13(4):6-13. (UGC approved list 64529)
SK Behera*, N Mishra, AK Rath, PK Sethy (2018). A Novel Approach for Classification of Apple Using On-Tree Images Based on Image Processing. International Journal of Applied Engineering Research (ISSN 0973-4562); 13(4):47-51. (UGC approved list 64529)
PK Sethy, S Panda *, SK Behera, AK Rath (2017). On Tree Detection, Counting & Post- Harvest grading of fruits Based on Image Processing and Machine Learning Approach-A Review. International Journal of Engineering and Technology (ISSN: 0975-4024); 9(5):649-663. (DOI:10.21817/ijet/2017/v9i2/170902058)
PK Sethy*, B Negi, SK Behera, NK Barpanda, AK Rath (2017). An Image Processing Approach for Detection, Quantification, and Identification of Plant Leaf Diseases -A Review. International Journal of Engineering and Technology (ISSN: 0975-4024); 9(2):635-648. (DOI: 10.21817/ijet/2017/v9i2/170902059)
PK Sethy*, P Bidhar, J Padhi, SK Behera (2016). Real-time Implementation of Odd-Even Traffic Control Formula Using Arduino. International Journal of Control Theory and Applications I J C T A, Â© International Science Press (ISSN: 0974-5572); 9(16):8001-8011.
SK Behera*, PK Sethy, PM Khilar (2011). Fault Diagnosis in Wireless Sensor Network using Timed Automata. International Journal of Computer Applications; 297(7):15-20. (DOI:10.5120/3578-4948)
Amit Kumar Behera, ChVenkatanarasimhaRao, Raj Kumar Das, ArdhenduSekharGiri & Animes Kumar Golder Fabrication and characterization of Ag-doped titania:impact of dye-sensitization, phenol decomposition kinetics and biodegradability index, Desalination and water treatment (2015),1-10.
K. P. Shadangi and R. K. Singh, â€œA Suitable Process for Production of Fuel Oil from Polanga seedâ€ Twenty fifth National Convention of Chemical Engineers 9-10 October 2009, Organized by The Institute of Engineers (India) Cochin Local centre, Cochin pp. 17-24.
Paper Presented in the Conferences: (Abstract published)

K. P. Shadangi and R. K. Singh, â€œProduction of Fuel oil By Slow Pyrolysis of Polanga Seedâ€ All India Seminar on â€œ Development of Green Fuel for Energy Security & Environmental Protectionâ€ , Sept. 4-5,2009, Organized byThe Institution of Engineers (India), Indore Local Centre, Indore.
K. P. Shadangi and K. Mohanty, â€œStudy the effect of catalyst on pyrolysis of Mahua seedâ€ National Conference on Recent Developments in Health, Hygiene and Environment. Defense Research Laboratory, Tezpur, Assam, 06- 08 November, 2012.
K. P. Shadangi and K. Mohanty, â€œPyrolysis: The possible root for Solid waste managementâ€ National Symposium on Solid Waste Management at IIT Guwahati, 6th. April, 2013.
K. P. Shadangi and K. Mohanty, â€œBiomass production in India (sources and application) Special reference to Assamâ€ Seminar on Empowering Assam from deficiency to abundance - Tapping Small Hydro, Biomass & Solar Potential. The Associated Chambers of Commerce and Industry of India (ASSOCHAM). Assam Administrative Staff College - Guwahati â€“ Assam 12th September 2013.
K. P. Shadangi and K. Mohanty, â€œThermo chemical conversion of non-edible oil seeds into liquid transportation fuelâ€. Organized by Indian Institute of Chemical Engineers. Chemcon 2013 held on 27-30 December 2013.
K. P. Shadangi and K. Mohanty. â€œThermal and Catalytic Cracking of Non-Edible Oil Seeds to Liquid Fuelâ€ 3rd National Conference on Recent Advances in Bio-energy research, held on Nov. 22-24, 2013 at SSS-NIRE, Kapurthala.
K. P. Shadangi.â€œStudy the Catalytic & Co-pyrolysis of Karanja Seed: Effect on The Fuel Properties & Composition of Pyrolytic oilâ€National Conference in Advance Materials (NCFAM-2019)held on 27 â€“ 28 July 2019 at Veer SurendraSai University of Technology, Burla. Sambalpur, Odisha.
N. Patel & K. P. Shadangi, â€œStudy the fuel characteristics of ethanol and waste engine oil pyrolytic oil blendsâ€, Environmental Science and Pollution Research, 2021, https://doi.org/10.1007/s11356-021-15281-8
N. Patel, K. P. Shadangi, P. K. Kar, â€œCharacterization of waste engine oil derived pyrolytic char (WEOPC): SEM, EDX and FTIR analysisâ€, Materials Today: Proceedings, Volume 38, 2866-2870, 2021.
N. Patel & K. P. Shadangi, â€œCharacterization of waste engine oil (WEO) pyrolytic oil and diesel blended oil: Fuel properties and compositional analysisâ€, Materials Today: Proceedings, Volume 33, 4933-4936, 2020.
N.Patel & K. P. Shadangi, â€œThermochemical conversion of waste engine oil (WEO) to gasoline-rich crude oilâ€, Journal of Material Cycles and Waste Management, volume 22 (2), 536-546, 2020.
N.Patel & Dr.P.C.Joshi, â€œPhysico-Chemical Analysisand Combustion Characteristicsofbio-diesel and applied sciencesâ€, International Journal of Emerging Technologies in Computational and Applied Sciences, Volume 4, Issue 10, pp. 359-364, 2014, ISSN: 2279-0047, (online)2279-0055.
N.Patel, â€œEnvironmental and economical effects of fossil fuelsâ€, Journal of Recent Research in Engineering and Technology, 2014, ISSN: 2349-2252, (online)2349-2260.
Tarun Sethi, Rupelirupanita Dash , Tunirani Nayak, â€œa Comparison of Bilateral Filter and direction based Adaptive Weighted Switching Bilateral Filter for removing mixed noise in image processingâ€, International Journal of Innovative Research in Technology & Science(IJIRTS), VOLUME 3, NUMBER3, ISSN:2321-1156
S. Majhi, S. Srichandan, S. Dhal, “An Algorithm for VM Migration: Analysis & Implementation”, Communications on Applied Electronics 3 (4), 2015.
Kaushik Mishra, & Santosh Kumar Majhi. A State-of-Art on Cloud Load Balancing Algorithms. International Journal of Computing and Digital Systems, 9(2), 201-220, (2020). (Indexed in Scopus)
Rosy Pradhan, Santosh Kumar Majhi, and Jemarani Jaypuria. "An orthogonal moth flame optimization for global optimization and application to model order reduction problem." Journal of Intelligent & Fuzzy Systems, (2020) In Press: 1-13. (DOI: 0.3233/JIFS-179744) (Indexed in SCI, Scopus, IF: 1.637)
Nibedan Panda, Santosh Kumar Majhi, Sarishma Singh, and Abhirup Khanna. "Oppositional spotted hyena optimizer with mutation operator for global optimization and application in training wavelet neural network." Journal of Intelligent & Fuzzy Systems. (2020) In press: 1-14. (DOI:0.3233/JIFS-179746 ) (Indexed in SCI, Scopus, IF: 1.637)
Nibedan Panda & Santosh Kumar Majhi, "Improved spotted hyena optimizer with space transformational search for training pi-sigma higher order neural network". Computational Intelligence (Wiley Publication). 2020;1â€“31. https://doi.org/10.1111/coin.12272 (indexed in SCI, Scopus, IF: 0.776)
R Pradhan, S K Majhi, J K Pradhan, B B Pati, "Optimal fractional order PID controller design using Ant Lion Optimizer", Ain Shams Engineering Journal,2019, Elsevier Publication,DOI: https://doi.org/10.1016/j.asej.2019.10.005.(Indexed in SCIE, Scopus, IF: 3.091)
Santosh Kumar Majhi, Madhusmita Sahoo, Rosy Pradhan, "Oppositional Crow Search Algorithm with mutation operator for global optimization and application in designing FOPID controller", Evolving Systems - An Interdisciplinary Journal for Advanced Science and Technology (Springer), 2019. doi:Â https://doi.org/10.1007/s12530-019-09305-5. (Indexed in Scopus, ESCI)
Nibedan Panda & Santosh Ku Majhi, "Improved Salp Swarm Algorithm with Space Transformation Search for Training Neural Network", Arabian Journal for Science and Engineering, Springer, DOI: https://doi.org/10.1007/s13369-019-04132-x (Indexed in SCI, Scopus; IF: 1.518)
S K Majhi, M Sahoo, R Pradhan, "A space transformational crow search algorithm for optimization problems", Evolutionary Intelligence, Springer, DOI: 10.1007/s12065-019-00294-7 (Indexed in Scopus)
Santosh Kumar Majhi, Sk Sajeed Hossain, Trilok Padhi, "MFOFLANN: moth flame optimized functional link artificial neural network for prediction of earthquake magnitude" Evolving Systems (Springer). https://doi.org/10.1007/s12530-019-09293-6.
Santosh Kumar Majhi, Fuzzy Clustering Algorithm based on Modified Whale Optimization Algorithm for Automobile Insurance Fraud Detection,Evolutionary Intelligence. Springer (2019). https://doi.org/10.1007/s12065-019-00260-3
Santosh Kumar Majhi, Abhilash Mishra, Rosy Pradhan, "A chaotic salp swarm algorithm based on quadratic integrate and fire neural model for function optimization", Progress in Artificial Intelligence, Springer. (https://doi.org/10.1007/s13748-019-00184-0)
A. Mishra, Santosh Kumar Majhi, "A comprehensive survey of recent developments in Neuronal Communication and Computational Neuroscience", Journal of Industrial Information Integration (2018), (Elsevier) doi: https://doi.org/10.1016/j.jii.2018.11.005
S.K. Majhi, S. Biswal, Optimal cluster analysis using hybrid K-Means and Ant Lion Optimizer, Karbala International Journal of Modern Science (2018), Elsevier, https://doi.org/10.1016/j.kijoms.2018.09.001
Santosh Kumar Majhi, Subho Bhatachharya, Rosy Pradhan and Shubhra Biswal, â€œFuzzy Clustering using Salp Swarm Algorithm for Automobile Insurance Fraud Detectionâ€, Journal of Intelligent and Fuzzy Systems, IOS Press. (Accepted)
Rosy Pradhan, Santosh Kumar Majhi, Bibhuti Bhusan Pati, â€œDesign of Fractional Order PID Controller for Heat Flow System using Hybrid Particle Swarm Optimization and Gravitational Search Algorithmâ€, International Journal of Computational Intelligence Studies, Inderscience. (Accepted)
Rosy Pradhan, Santosh Kumar Majhi, Bibhuti Bhusan Pati, (2018) "Design of PID controller for automatic voltage regulator system using Ant Lion Optimizer", World Journal of Engineering, Vol. 15 Issue: 3, pp.373-387.
Santosh Kumar Majhi, Shankho Subhra Pal, Grey wolf optimization trained feed foreword neural network for breast cancer classification, International Journal of Applied Industrial Engineering (IJAIE), 2018 (Accepted)
Santosh Kumar Majhi, An Efficient Feed Foreword Network Model with Sine Cosine Algorithm for Breast Cancer Classification, International Journal of System Dynamics Applications, Vol 7(2) pp 1-14, 2018.
Rosy Pradhan, Santosh Kumar Majhi, Jatin Ku Pradhan, Bibhuti Bhusan Pati, Antlion Optimizer tuned PID controller based on Bode Ideal Transfer Function for Automobile Cruise Control System, Journal of Industrial Information Integration (Elsevier), 2018.
R. Pradhan, S. K. Majhi, J. Pradhan, and B. Pati, " Performance Evaluation of PID Controller for an Automobile Cruise Control System using Ant Lion Optimizer," Engineering Journal, vol. 21, no. 5, pp. 347-361, 2017.Â doi:10.4186/ej.2017.21.5.347
S K Majhi and S K Dhal. "Formal Analysis of Virtual Machine Migration and Identification of Faults." IJKBO 8.1 (2018): 16-28. doi:10.4018/IJKBO.2018010102
S. K. Majhi, S. S. Pal, Bhuyan, S., & Dhal, S. K. (2018). Queuing Analysis of Cloud Load Balancing Algorithms. International Journal of Knowledge-Based Organizations (IJKBO), 8(1), 50-67. doi:10.4018/IJKBO.2018010104
S. Majhi, S. K. Shal, S. S. Pasumarthi, “A Study On Economy And Statergy For Cloud Computing Adoptation”, IJRD- Management Review, 5(1): 39-49 (2016).
S. Majhi and S. K. Dhal . “Smart Placement of Security Devices in Cloud Data Center Network”. Smart Computing Review, 5(4): 408-416 (2015).
S. Majhi and S. K. Dhal . “A Security State Transfer Model for Virtual Machine Migration in Cloud Infrastructure”. International Journal of Computer Applications 127(4):10-14, October 2015. Published by Foundation of Computer Science (FCS), NY, USA.
S. Majhi, S. K. Srichandan and S. K. Dhal. “An Algorithm for VM migration: Analysis & Implementation”. Communications on Applied Electronics 3(4), 2015. Published by Foundation of Computer Science (FCS), NY, USA.
S. Majhi, Gyanaranjan Shial, “Challenges in Big Data Cloud Computing And Future Research Prospects: A Review”. Smart Computing Review, 5(3): 340-345 (2015).
S. Majhi, S. Behera, “Algorithmic Approach for Test Scenario Generation from UML Composite Structure Diagram”, International Journal of Information Processing, 9 (3): 17-27 (2015).
S. Majhi, “Cyber security Issues and Challenges: A view”, Journal of Global Research in Computer Science, 6, 1-5 (2015).
S. Majhi, “Cloud Service Provider Selection in Federated Multi Cloud System: An Algorithmic Approach”, International Journal of Applied Engineering Research (IJAER), 10, 31781-31785 (2015).
Gyanaranjan Shial, S. Majhi, D B Phatak, “A Comparison Study for File Synchronisation”, Proceedia Computer Science, Elsevier, 48, 133-141 (2015).
S. Majhi, “An Efficient Information Retrieval Algorithm for Federated Healthcare Medication System”, International Journal of Advanced Electrical and Electronics Engineering (IJAEEE), 4, 28-33 (2015)
S Majhi, P. Bera, “OHMF: Optimal Healthcare Medication Framework”, International Journal of Information Processing, 8, 1-12, 2014
G. Shial and S. Majhi, “Techniques for file synchronisation: a survey”, Journal of Global Research in Computer Science, 5, 1-4 (2014)
B. R. Swain, A. k. Sharma, â€œAn Investigation of Dual-band Dual-square Ring (DSR) Based Microstrip Antenna for WiFi/WLAN and 5G-NR Wireless Applicationsâ€ Progress in Electromagnetic Research M (PIER M) Vol. 86, 17â€“26, 2019(Scopus indexed).
B. R. Swain, A. k. Sharma, â€œA Compact Fractal Antenna for Ultra-Wide Band Operationâ€ Journal of Computer science, Science Publication. (Accepted Oct 2019) (Scopus indexed).
M. K. Bonthu, A. K. Sharma, â€œAn investigation of dielectric material selection of RF-MEMS switches using Ashby's methodology for RF applicationsâ€ Microsystem Technologies, Springer vol.24, pp.1803-1809, 2018. (SCI indexed) [impact factor- 1.58]
Ashish K Sharma and Navneet Gupta, â€œAn Improved Design of MEMS Switch for Radio Frequency Applicationsâ€ Int. J. of Applied Electromagnetics and Mechanicsâ€ IOS Press, Japan. 11-19, vol. (47) 2015. (SCI and Scopus indexed) [impact factor- 0.804].
Ashish K. Sharma and Navneet Gupta, â€œElectromagnetic Modeling and Parameter Extraction of RF-MEMS Switchâ€ Microsystem Technologies: Springer-Verlag Berlin. 181-185, vol. (21) 2015. (SCI indexed) [impact factor- 1.58]
Ashish K. Sharma and Navneet Gupta, â€œInvestigation of Actuation Voltage for Non-Uniform Serpentine Flexure Design of RF-MEMS Switchâ€, Microsystem Technologies: Springer-Verlag Berlin, 413-418, vol. (20) 2014. (SCI indexed) [impact factor- 1.58]
Ashish K. Sharma and Navneet Gupta, â€œAnalytical Modeling for Spring Constant of Non-Uniform Serpentine Radio Frequency-Micro Electro Mechanical System Switchâ€ Advanced Science, Engineering and Medicine, American Scientific Publishers, 5 (12), 1322-1325, (2013).
Ashish K. Sharma and Navneet Gupta,â€ Microelectromechanical System (MEMS) Switches for Radio Frequency Applications-A Review,â€ Sensors & Transducers, pp. 11-21, Vol. 148 (2013) (Scopus indexed).
Ashish K. Sharma and Navneet Gupta,â€Material Selection of RF-MEMS Switch used for reconfigurable antenna using Ashbyâ€™s methodologyâ€ Progress in Electromagnetics Research Letters (PIER-L), 147-157, vol. 31 (2012), Cambridge, USA. (Scopus indexed).
Uttamarani Pati, P. Ray, Arvind R Singh, â€œ An intelligent approach towards very short-term load forecastingâ€, International Journal of Emerging Electric Power Systems, 2021,https://doi.org/10.1515/ijeeps-2021-0012
Mohamed Hamdy, Almoataz Y Abdelaziz, P. Ray, Mahmoud A Attia, â€œ Comparison between flexible AC transmission systems (FACTs) and filters regarding renewable energy systems harmonics mitigationâ€, International Journal of Emerging Electric Power Systems, 2021, https://doi.org/10.1515/ijeeps-2020-0274
P. Ray, Surender Reddy Salkuti, and Monalisa Biswal. "Two accurate hybrid islanding detection schemes for distribution network." Journal of Intelligent & Fuzzy Systems Preprint (2021): 1-12.
Panda, Saroj Kumar, P. Ray, and Debani Prasad Mishra. "Short Term Load Forecasting using Metaheuristic Techniques." In Materials Science and Engineering Conference Series, vol. 1033, no. 1, p. 012016. 2021.
Saroj Kumar Panda, P. Ray, â€œ Analysis and evaluation of two short-term load forecasting techniquesâ€, International Journal of Emerging Electric Power Systems, 2021, https://doi.org/10.1515/ijeeps-2021-0051
Panda, Saroj Kumar, P. Ray, and Debani Prasad Mishra. "Short term load forecasting using metaheuristic techniques." In IOP Conference Series: Materials Science and Engineering, vol. 1033, no. 1, p. 012016. IOP Publishing, 2021.
P. Ray, Surender Reddy Salkuti, and Monalisa Biswal. "Two accurate hybrid islanding detection schemes for distribution network." Journal of Intelligent & Fuzzy Systems Preprint (2021): 1-12.
P. Ray, S. Surender Reddy, and Tuhina Banerjee. "Various dimension reduction techniques for high dimensional data analysis: a review." Artificial Intelligence Review (2021): 1-43.
Prasad, Ch Durga, Monalisa Biswal, and P. Ray. "Enhancing fault detection function in wind farmâ€integrated power network using Teaching Learningâ€Based Optimization technique." International Transactions on Electrical Energy Systems (2020): e12735.
Seong-Cheol, Kim, P. Ray, and Surender Reddy Salkuti. "Islanding detection in a distribution network with distributed generators using signal processing techniques." International Journal of Power Electronics and Drive Systems 11, no. 4 (2020): 2099.
Sabha Raj Arya, Sayed Javed Alam and P. Ray, â€œControl algorithm based on limit cycle oscillator-FLL for UPQC-S with optimized PI gainsâ€, EEE-CSEE Journal of Power and Energy Systems (Early Access), doi: 10.17775/CSEEJPES.2019.01030,2020, pp.1-12.
P. Ray and Uttamarani Pati, â€œ An intelligent approach for short-term load forecastingâ€, UGC Care Journal, Vol. 40, Issue.10, Feb 2020.
Seon-Cheol Kim, P. Ray and S. Surender Reddy, â€œFeatures of smart grid technologies: An Overviewâ€, ECTI Transactions on Electrical Eng.,Electronics, and Communications, vol.17, no.2, 2019,pp.169-180.
Chan-Mook Jung, P. Ray and Surender Reddy Salkuti, â€œAsset management and maintenance:a smart grid prospectiveâ€, International Journal of Electrical and Computer Engineering, Vol. 9. No. 5, 2019, pp. 3391-3398.
P. Ray, Rajesh Kumar Lenka and Monalisa Biswal, â€œFrequency mode identification using modified masking signal based Empirical Mode Decompositionâ€, IET Gener.Transm.Distrib., vol.13,issue.8, doi: 10.1049/iet-gtd.2018.5527,pp.1266-1276,2019.
P. Ray, G. Budumuru and B.K.Mohanty, “A comprehensive review on soft computing and signal processing techniques in feature extraction and classification of power quality problems”, Journal of Renewable and Sustainable Energy, vol.10, doi:10.1063/1.5006772, pp. 025102, 2018.
T. Sinha, P.Ray and S.S.Reddy, “Protection Coordination in Microgrid using fault current limiters”, Journal of Green Engineering, vol.8, issue.2, 2018, pp. 125-150, doi: 10.13052/jge/904-4720.822.
P. Ray, S. Arya, D.Mishra, “Intelligence Scheme for Fault Location in a Combined Overhead Transmission Line & Underground Cable”, International Journal of Emerging Electric Power Systems, 2018, doi: 10.1515/ijeeps-2017-0277
V. Rajgopal, V. Nagamalleswari, Papia Ray, S. R. Arya and J. Bangarraju, “Reduced switch technique for solar PV systembased Multilevel Inverter for PQ improvement”, International Journal of Emerging Electric Power Systems, 2018, doi: 10.1515/ijeeps-2018-0012.
D. P. Mishra and P.Ray, â€œFault detection,location and classification of a transmission line,â€ Neural Computing and Applications, Springer, doi: 10.1007/s00521-017-3295-y, vol.30, pp. 1377-1424, 2018, Impact Factor.4.664.
P. Ray, B. K. Panigrahi and N. Senroy â€œHybrid methodology for fault distance estimation in series compensated transmission lineâ€, IET Gen. Trans. Dist., doi:10.1049/iet-gtd.2012.0243, vol. 7, issue 5, 2013, pp. 431-439, ISSN:1751-8687. Impact Factor. 1.57
P. Ray, D. Mishra, â€œApplication of extreme learning machine for underground cable fault locationâ€, International Transactions on Electrical Energy Systems, doi:10.1002/etep.2032,Wiley, vol. 25, Issue. 7, 2014, ISSN:1546-3109.Impact Factor. 1.314.
P. Ray and D. Mishra, “Support Vector Machine Based Fault Classification and Location of a Long Transmission Line”, International Journal on Engineering Science and Technology (JESTECH), Elsevier Science, doi: 10.1016/j.jestch.2016.04.001,vol. 19, Issue. 3,2016, pp. 1368-1380. Science Citation Index.
P. Ray, “Power system low frequency oscillation mode estimation using wide area measurement systems”, International Journal on Engineering Science and Technology (JESTECH), Elsevier Science, doi:10.1016/j.jestch.2016.11.019, vol. 20, 2017, pp.598-615. Science Citation Index
P.Ray, S.Arya and S. Nandkeolyar, “Electric Load Forecasts by Metaheuristic Based Back Propagation Approach”, Journal of Green Engineering, vol. 7, pp. 61-62, 2017, In Press, doi:10.13052/jge1904-4720.7124.
P. Ray, D. Mishra, “ Signal Processing Technique based fault location of a distribution line”, in Proc. IEEE 2nd Int. Conf. on Recent Trends in Information Systems (RETIS), July 9-11, 2015, Jadavpur Univ, Kolkata, India.
P. Ray, S. Sen, “Hybrid methodology for short-term load forecasting”, in Proc. IEEE conf. Power electronics, Drives and Energy systems (PEDES- 2014), pp. 1-6.
P. Ray, D. Mishra, “Artificial Intelligence based fault location in a distribution system”, in IEEE conf. 13th International Conf. Information Technology (ICIT 2014),Â 23-24th Dec 2014, Bhubaneswar, pp. 18-23.
P. Ray“Fast and accurate fault location by extreme learning machine in a series compensated transmission line”,Â in IEEE conf. Power and Energy Systems-Towards sustainable energy systems (PESTSE 2014), 13-15 March, Bangalore, 2014, pp.1-6.
P. Ray, B. K. Panigrahi and N. Senroy “Extreme learning machine based fault classification in a series compensated transmission line”, in IEEE conf. Power electronics, Drives and Energy systems (PEDES- 2012), Dec. 16-19, 2012, pp.1-6.
P. Ray, B. K. Panigrahi and N. Senroy “An AI approach for fault distance estimation in series compensated transmission line”, in Proc. IEEE conf. Energy, Automation and Signal (ICEAS-2011), Dec. 28-30, pp. 1-6, 2011.
S. Sahoo, P. Ray, B. K. Panigrahi and N. Senroy “A computational intelligence approach for fault location in transmission lines”, in Proc., IEEE conf. Power electronics, Drives and Energy systems (PEDES-2010), Dec. 21-23, pp. 1-6, 2010.
D. P. Mishra and P. Ray, “Calculation of power quality factor of supply system using lab view”, accepted for presentation in Michael Faraday IET Int. Summit: MFIIS-2015, September 21-23, 2015, Kolkata, India.
Nutan Saha, Sidhartha Panda, Hybrid Modified Whale Optimisation Algorithm Simulated Annealing Technique for control of SRM, International Journal of Applied Metaheuristics,12(3), 2021
N Saha, S. Panda, â€œCosine Adapted Modified Whale Optimization Algorithm for Control of Switched Reluctance Motorâ€ Computational Intelligence(Special Issue), WILEY(SCIE/SCOPUS), 2020.
Nutan Saha, A. K. Panda, Sidhartha. Panda â€œSpeed control with torque ripple reduction of switched reluctance motor with many optimizing liaison techniqueâ€ Journal of electrical system and information technology(Elsevier), 2017.
Nutan Saha, Sidhartha. Panda â€œSpeed control with torque ripple reduction of switched reluctance motor hybrid many optimizing liaison gravitational search techniqueâ€ Engineering science and technology an international journal(Elsevier), 2017. NOTE: This model has been included in MATLAB Documentation-2019 https://in.mathworks.com/help/physmod/sps/ref/srmcurrentcontroller.html.
N. Saha, S.Panda, â€œApplication of many optimizing liaisons technique for control with torque ripple minimization of switched reluctance motorâ€, Asian Journal of Convergernce in Technology
[5] Pathak, G., Mohanty, D., Dwivedi, S. K., Singh, B., & Panigrahi, B. K. (2019) Implementation of MVF-based control technique for 3-Î¦ distribution static compensator. Journal of The Institution of Engineers (India): Series B (SCOPUS Indexed), 100(6), 589-597.
[4] Mohanty, D.; Panda, S. (2020) Frequency control of hybrid power system by sine function adapted improved whale optimization technique. International Journal of Ambient Energy, Taylor and Francis (SCOPUS Indexed), 1-18.
[3] Mohanty, D.; Panda, S. (2021) Modified salp swarm algorithm-optimized fractional-order adaptive fuzzy PID controller for frequency regulation of hybrid power system with electric vehicle. Journal of Control, Automation and Electrical Systems, Springer (SCOPUS Indexed), 32(2), 416-438.
[2] Mohanty, D.; Panda, S. (2021) A modified moth flame optimisation technique tuned adaptive fuzzy logic PID controller for frequency regulation of an autonomous power system. International Journal of Sustainable Energy, Taylor and Francis (SCOPUS Indexed), 40(1), 41-68.
[1] Mohanty, D.; Panda, S. (2021) Sine cosine adopted Harris' hawks optimization for function optimization and power system frequency controller design. International Transactions of Electrical Energy System, Wiley (SCIE Indexed, Impact Factor- 2.860), 31, e12915.
Soreng, B. and Pradhan, R., 2021. An Optimal Islanding Detection Scheme for an Inverter-based Distribution Generation System. Distributed Generation & Alternative Energy Journal, pp.169-202.
Soreng, B. and Pradhan, R., 2021. Optimal controller design for an islanded microgrid during load change. International Journal of Grid and Utility Computing, 12(3), pp.237-252.
Soreng, B. and Pradhan, R., 2021. Comparative analysis of some remarkable islanding detection techniques in inverter-based distributed generation systems. Electric Power Components and Systems, 49(8), pp.806-827.
A New Adaptive Maximum Power Point Controller for a Photovoltaic System, IEEE transactions on Sustainable Energy,accepted to be published (online available).
Bacterial Foraging Optimization Approach to Parameter Extraction of a Photovoltaic Module, IEEE Transactions on Sustainable Energy 9 (1), 381-389, 2018(cited by-12).
A comparative study on maximum power point tracking techniques for photovoltaic power systems, IEEE transactions on Sustainable Energy 4 (1), 89-98, 2013.(cited by-858)
Double Integral Sliding Mode MPPT Control of a Photovoltaic System, IEEE Transactions on Control Systems Technology 24 (1), 285-292, 2016. (cited by-23)
Design and real-time implementation of a new auto-tuned adaptive MPPT control for a photovoltaic system, International Journal of Electrical Power and Energy Systems (Elsivier) 64 (1), 792â€“803, 2015. (cited by-22)
A comparative study on solar array parameter extraction methods, International Journal of Renewable Energy Technology (Inderscience),3 (3), 295-315, 2012. (cited by-19)
An Adaptive Predictive Error Filter based Maximum Power Point Tracking Algorithm for a Photovoltaic System, The Journal of Engineering 1, 1-28, 2016 (cited by-1).
Adaptive double-integral-sliding-mode-maximum-power-point tracker for a photovoltaic system, The Journal of Engineering 1 (1), 2015.
Development of RANK Indicators for Transmission Lines and Generators to Forecast Voltage Stability Status of Power System in Presence of SVC, AMSE, 83 (3), 2010.
Voltage Control Analysis Applying Advanced SVC model, International Journal on Electronics & Electrical Engineering (IJEEE), 4 (6), 2009.
R Pradhan, B. Soreng, P. Behera, Design of A Grid Integrated PV System with MPPT Control and Voltage Oriented Controller usingMATLAB/PLECES, IOP Conf. Series: Materials Science and Engineering, 2017.
K. Sharma and R. Pradhan, Design of A Novel Feed-Forward Control Strategy for A Non-Minimum Phase System, IOP Conf. Series: Materials Science and Engineering, 2017.
Samita Rani Pani, Rajat Kanti Samal, Evaluation of power grid vulnerability indices accounting for wind power uncertainty, Sustainable Energy, Grids and Networks, Volume 38, 2024, 101354, ISSN 2352-4677, https://doi.org/10.1016/j.segan.2024.101354.
Samita Rani Pani, Rajat Kanti Samal, Evaluation of reliability and resilience in wind integrated power systems using 80 meter mast measurements, Electric Power Systems Research, Volume 241, 2025, 111263, ISSN 0378-7796, https://doi.org/10.1016/j.epsr.2024.111263.
Samal, R.K. Performance of Metaheuristic Algorithms for Wind Resource Modelling: A Comparison Using 80 m Mast Measurements. Arabian Journal for Science and Engineering, (2024). https://doi.org/10.1007/s13369-024-08839-4
Samal, R.K. A Comparison of Cost and Emission Reduction Efficacy of Wind Energy in Hydrothermal Systems. Iranian Journal of Science and Technology, Transactions of Electrical Engineering(2023). https://doi.org/10.1007/s40998-023-00654-1
Rajat Kanti Samal (2022) Techno-economic analysis and wind resource assessment for Odisha, India using reanalysis and 80 m mast measurements: a preliminary assessment for policy-makers, International Journal of Ambient Energy, DOI: 10.1080/01430750.2022.2137581
Rajat Kanti Samal, Assessment of wind energy potential using reanalysis data: A comparison with mast measurements, Journal of Cleaner Production, Volume 313, 2021, 127933, ISSN 0959-6526, https://doi.org/10.1016/j.jclepro.2021.127933
Rajat Kanti Samal (2021): Probabilistic Modelling of 80 m Mast Measured Wind Resource: A case study., Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, DOI: 10.1080/15567036.2021.1910753
Rajat Kanti Samal, M. Tripathy, Cost savings and emission reduction capability of wind-integrated power systems, International Journal of Electrical Power & Energy Systems, Volume 104, 2019, Pages 549-561, ISSN 0142-0615, https://doi.org/10.1016/j.ijepes.2018.07.039.
Rajat Kanti Samal & Manish Tripathy (2018): Estimating wind speed probability distribution based on measured data at Burla in Odisha, India, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects,Â DOI: 10.1080/15567036.2018.1521888.
Rajat Kanti Samal, M. Tripathy, Cost and emission additionality of wind energy in power systems, Sustainable Energy, Grids and Networks, Volume 17, 2019, 100179, ISSN 2352-4677, https://doi.org/10.1016/j.segan.2018.12.001
M. Tripathy, Rajat Kanti Samal, A new perspective on wind integrated optimal power flow considering turbine characteristics, wind correlation and generator reactive limits, Electric Power Systems Research, Volume 170, 2019, Pages 101-115, ISSN 0378-7796, https://doi.org/10.1016/j.epsr.2019.01.018.
Rajat Kanti Samal, M. Tripathy, A novel distance metric for evaluating impact of wind integration on power systems, Renewable Energy, Volume 140, 2019, Pages 722-736, ISSN 0960-1481, https://doi.org/10.1016/j.renene.2019.03.094.
R Pradhan, S K Majhi, J K Pradhan, B B Pati, "Optimal fractional order PID controller design using Ant Lion Optimizer", Ain Shams Engineering Journal,2019, Elsevier Publication,DOI: https://doi.org/10.1016/j.asej.2019.10.005.(Indexed in SCIE, Scopus, IF: 3.091
Santosh Kumar Majhi, Madhusmita Sahoo, Rosy Pradhan, "Oppositional Crow Search Algorithm with mutation operator for global optimization and application in designing FOPID controller", Evolving Systems - An Interdisciplinary Journal for Advanced Science and Technology (Springer), 2019. doi:Â https://doi.org/10.1007/s12530-019-09305-5. (Indexed in Scopus, ESCI)
S K Majhi, M Sahoo, R Pradhan, "A space transformational crow search algorithm for optimization problems", Evolutionary Intelligence, Springer, DOI: 10.1007/s12065-019-00294-7
Rosy Pradhan, Bibhuti Bhusan Pati, â€œComparative Performance Evaluation of Fractional Order PID Controller for Heat Flow System using Evolutionary Algorithmâ€, International Journal of Meta-heuristic Computing, IGI Global.
Santosh Kumar Majhi, Subho Bhatachharya, Rosy Pradhan and Shubhra Biswal, â€œFuzzy Clustering using Salp Swarm Algorithm for Automobile Insurance Fraud Detectionâ€, Journal of Intelligent and Fuzzy Systems, IOS Press.
Rosy Pradhan, Santosh Kumar Majhi, Bibhuti Bhusan Pati, â€œDesign of Fractional Order PID Controller for Heat Flow System using Hybrid Particle Swarm Optimization and Gravitational Search Algorithmâ€, International Journal of Computational Intelligence Studies, Inderscience, Vol. 8, Issue Â½, 2019.
Rosy Pradhan, Santosh Kumar Majhi, Bibhuti Bhusan Pati, (2018) "Design of PID controller for automatic voltage regulator system using Ant Lion Optimizer", World Journal of Engineering (Emerlad), Vol. 15 Issue: 3, pp.373-387, https://doi.org/10.1108/WJE-05-2017-0102
Rosy Pradhan, Santosh Kumar Majhi, Jatin Ku Pradhan, and Bibhuti Bhusan Pati. "Antlion optimizer tuned PID controller based on Bode ideal transfer function for automobile cruise control system." Journal of Industrial Information Integration (Elsevier) Vol. 9 (2018): 45-52.
Rosy Pradhan, Santosh Kumar Majhi, Jatin Kumar Pradhan, and Bibhuti Bhusan Pati. "Performance Evaluation of PID Controller for an Automobile Cruise Control System using Ant Lion Optimizer." Engineering Journal 21, no. 5 (2017): 347-361.
J.Meher & R.Jha(2011)"Time series analysis of rainfall data over Mahanadi river basin",Emerging Science,3(6),22-32.
J.Meher & R.Jha(2013)"Time series analysis of monthly rainfall data for the Mahanadi river basin,India",Sciences in cold and arid regions,5(1),73-84.
Sarojrani Pattnaik, An Investigation on Enhancing Ceramic Shell Properties using Naturally Available Additives, International Journal of Advanced Manufacturing Technology, DOI 10.1007/s00170-016-9975-4.
Sarojrani Pattnaik, D.B. Karunakar and P.K. Jha, Developments in investment casting process-A review, Journal of Materials Processing Technology, 212, 2332â€“2348, 2012.
Sarojrani Pattnaik, D.B. Karunakar and P.K. Jha, Multi-characteristic optimization of wax patterns in the investment casting process using greyâ€“fuzzy logic, International Journal of Advanced Manufacturing Technology, 67, 1577â€“1587, 2013.
Sarojrani Pattnaik, D.B. Karunakar and P.K. Jha, Utility-Fuzzy-Taguchi based hybrid approach in investment casting process, International Journal of Interactive Design and Manufacturing, 8:77â€“89, 2014.
Sarojrani Pattnaik, D.B. Karunakar and P.K. Jha, Influence of injection process parameters on dimensional stability of wax patterns made by the lost wax process using Taguchi approach, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, 227(1) 52â€“60, 2012.
Sarojrani Pattnaik, D.B. Karunakar and P.K. Jha, Optimization of multiple responses in the lost wax process using Taguchi method and grey relational analysis, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, 227(2) 156-167, 2012.
Sarojrani Pattnaik, P.K. Jha, D.B. Karunakar, A review of rapid prototyping integrated investment casting processes, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, DOI: 10.1177/1464420713479257, 2013.
Sarojrani Pattnaik, D.B. Karunakar and P.K. Jha, A prediction model for the lost wax process through fuzzy-based artificial neural network, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, DOI: 10.1177/0954406213507701, 2013.
Sarojrani Pattnaik, D.B. Karunakar and P.K. Jha, Parametric optimization of the investment casting process using utility concept and Taguchi method, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, DOI: 10.1177/1464420713487654, 2013.
Sarojrani Pattnaik, D.B. Karunakar and P.K. Jha, Modeling and parametric optimization of investment casting process by uniting desirability function approach and fuzzy logic, Journal of Intelligent and Fuzzy Systems - IOS Press 10.3233/IFS-130809, 2013.
Sarojrani Pattnaik, P.K. Jha, D.B. Karunakar, A novel method of increasing ceramic shell permeability and optimizing casting shrinkage and tensile strength of the investment cast parts, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, DOI: 10.1177/0954405415606386, 2015.
Sarojrani Pattnaik , Mihir Kumar Sutar, Jayadev Rana, Multi-objective optimization of the EMS processed IC by grey-fuzzy method, Materials Today: Proceedings, 2(4), 2555-2561, 2015.
Mihir Kumar Sutar, Sarojrani Pattnaik Â and Jayadev Rana, Neural Based Controller for Smart Detection of Crack in Cracked Cantilever Beam, Materials Today: Proceedings, 2(4), 2648-2653, 2015.
Mihir Kumar Sutar and Sarojrani Pattnaik, Vibration characteristics of a cracked cantilever beam under free vibration, Noise and Vibration worldwide, 16-21, 41 (9), 2010.
Sarojrani Pattnaik, D.B. Karunakar and P.K. Jha, Application of computer simulation for finding optimum gate location in plastic injection moulding, International Journal of Advanced Engineering Resesarch and studies, 1 (2), 159-161, 2012.
Sarojrani Pattnaik and Dr. M.S.Khan, Application of TQM to Assure Supply Chain Security, International Journal of Advanced Engineering Applications, 1 (2), 1-14, 2008.
Sarojrani Pattnaik and Mihir Kumar Sutar, Supply chain integration in relation to manufacturing industries, International Journal of Manufacturing Technology and Industrial Engineering (IJMTIE), 1(1), 79-84, 2010.
S. R. Mishra and SheejaKochuthundilLalitha, “Implementation of Defected Ground Structure for MicrostripFiltenna Design”, International Journal of RF and Microwave Computer-aided Engineering, pp. 1-12, 2nd October 2019, DOI: 10.1002/mmce.21998.
S. R. Mishra and SheejaKochuthundilLalitha, “Filtennas for wireless application: A review”, International Journal of RF and Microwave Computer-aided Engineering, pp. 1-28, 20th June 2019, DOI 10.1002/mmce.21879.
S. R. Mishra, Sheeja K. L. and N. P. Pathak, “Split Ring Resonator Inspired MicrostripFiltenna for Wireless Application”, European Journal of Automated Systems, Vol. 50, Issue 4-6, pp. 391-403, 2017,DOI:10.3166/jesa.20.391-403.
S. R. Mishra and Sheeja K. L., “DGS Inspired Microstrip Antenna Array for Improved Radiation Properties”, International Journal of Engineering and Techniques, Vol. 3, Issue 1, 38-42, Jan â€“ Feb 2017. (ISSN No. 2395-1303, Paper ID: IJET-V3I1P10)
SheejaKochuthundilLalitha, S.K. Behera and P.K. Sahu, “Bandwidth Improvement of a Zeroth Order Resonant Antenna for WiMax Applications”, International Journal of RF and Microwave Computer-aided Engineering, vol. 22, no. 4,Â pp. 569-574, July 2012, DOI 10.1002/mmce. 20647.
Sheeja K.L., P. K. Sahu, S. K. Behera and Nabil Dakhli, “Compact Triband Metamaterial Antenna for Wireless Applications”, Applied Computational Electromagnetics Society (ACES) Journal, vol. 27, no. 11, pp. 947 â€“ 955, Nov. 2012.
Sheeja K.L., P.K. Sahu and S.K. Behera, “Design and Optimization of aÂ Zeroth Order Resonant antenna along with Experimental Verification for Wireless Applications”, International Journal of Signal and Imaging Systems Engineering (IJSISE), Vol.8, Nos. 1/2, 2015, Inderscience Publishers, DOI 10.1504/IJSISE.2015.067051.
D.Mundari, M.Panda, "Application of A* and GA for path planning of mobile robots: A comparative study", IJLRET, Jan-2017.
M. Panda, B. Das, B. Subudhi, B. B. Pati, â€œA Comprehensive Review of Path Planning Algorithms for Autonomous Underwater Vehiclesâ€, IJAC-2019 (In press)
M.Panda, R.K.Das“Wireless OFDM systems and Cross layer optimization ”IJIPVS,vol.2, ,pp 90-94, July 2013
M.Panda ,“Review of synchronization techniques for OFDM” IJECEE,vol-4,pp 91-95, July-Dec 2013
Sasmita Kar, Sarojrani Pattnaik, Mihir Kumar Sutar (2024). Assessment of mechanical and thermal properties of hybrid co-woven biofiber polymer composites. Industrial Crops and Products, vol. 222 (3), pp. 119756, https://doi.org/10.1016/j.indcrop.2024.119756. SCIE, IF- 5.6.
Sasmita Kar, Sarojrani Pattnaik, Mihir Kumar Sutar (2024). Influence of nano industrial waste and short coir fiber filler on hybrid inter and intra yarn bio fiber composites. Journal of Elastomers & Plastics, vol. 56 (8), pp. 958-983, https://doi.org/10.1177/00952443241289539. SCIE, IF-1.4.
Sasmita Kar, Sarojrani Pattnaik, Mihir Kumar Sutar (2024). Characteristic study of intra woven green fibers for structural application. International Journal of Materials Research, vol. 115, no. 11-12, pp. 1044-1055. https://doi.org/10.1515/ijmr-2024-0040. SCIE, IF – 0.7.
Amit Kumar Gantayat, Mihir Kumar Sutar, Jyoti Ranjan Mohanty, Sarojrani Pattnaik (2024). Free vibration analysis of an O-pattern graphene reinforced axial functionally graded polymer matrix nano-composite non-uniform beam. Journal of Elastomers & Plastics, vol. 56 (7), pp. 897-906, https://doi.org/10.1177/00952443241281986. SCIE, IF – 1.4.
Sasmita Kar, Saismita Behera, Sandeep Bhoi, Sarojrani Pattnaik, Mihir Kumar Sutar (2024). Effect of bio nanofiller in influencing the carbon and E-glass fabric reinforced composites. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 238 (10), pp. 1929 -1941, https://doi.org/10.1177/146442072412369. SCIE, IF - 2.5.
Amit Kumar Gantayat, Mihir Kumar Sutar, Jyoti Ranjan Mohanty, Sarojrani Pattnaik (2024). Analysis of free vibration characteristics of non-uniform graphene-reinforced axially functionally graded nanocomposite beam. Advanced Composite Materials, 1–21. https://doi.org/10.1080/09243046.2024.2407956. SCIE, IF -1.8.
Sasmita Kar, Ipsita Jena, Sandeep Bhoi, Sarojrani Pattnaik, Mihir Kumar Sutar (2023). Impact of distinct alkaline treatment on natural plant fibre reinforced polymer composites. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 237 (24), pp. 5951-5962, https://doi.org/10.1177/09544062231168723. SCI, IF -1.8.
Sasmita Kar, Suryakanta Mishra, Sarojrani Pattnaik, Mihir Kumar Sutar (2023). Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 237 (20), pp. 4759-4768. https://doi.org/10.1177/0954406223115408. SCI, IF -1.8.
Sarojrani Pattnaik, Mihir Kumar Sutar (2022). Preparation and analysis of a hybrid ceramic shell for investment casting. The International Journal of Advanced Manufacturing Technology, vol. 122 (5), pp. 2513-2527. https://doi.org/10.1007/s00170-022-10054-0. SCIE, IF - 2.9.
Ramya Prakash Sahu, Mihir Kumar Sutar, Sarojrani Pattnaik (2021). A Generalized Finite Element Approach towards the Free Vibration Analysis of Non-uniform Axially Functionally Graded Beam. Scientia Iranica, vol. 29 (2), pp. 556-571. doi: 10.24200/sci.2021.57274.5151. SCIE, IF - 1.4.
Sarojrani Pattnaik, Mihir Kumar Sutar (2021). "Enhancement of Ceramic Slurry Rheology in Investment Casting Process". Arabian Journal for Science and Engineering (2021), https://doi.org/10.1007/s13369-021-05834-x. SCI, Impact Factor:2.334.
Sarojrani Pattnaik, Mihir Kumar Sutar (2021). "Influence of Ultra- Sonic Drilling on Colloidal Silica Based Ceramic Moulds for Investment Casting". Sillicon, https://doi.org/10.1007/s12633-021- 01166-5. SCI, Impact Factor:2.670.
Sarojrani Pattnaik, Mihir Kumar Sutar (2021) "Effect of Saw Dust Content on Slurry Rheology and Mechanical Properties of the Investment Casting Ceramic Shell". International Journal of Metalcasting, vol. 15, pp. 470â€“487, https://doi.org/10.1007/s40962- 020-00478-3. SCI, Impact Factor: 1.805.
Sarojrani Pattnaik, Mihir Kumar Sutar (2021). "Advanced Taguchi- Neural Network Prediction Model for Wire Electrical Discharge Machining Process". Advanced Taguchi-Neural Network Prediction Model for Wire Electrical Discharge Machining Process. Process Integration and Optimization for Sustainability, vol.5, pp. 159â€“172. https://doi.org/10.1007/s41660-020-00148-1. (Scopus).
Satyajit Dwivedi, Sarojrani Pattnaik, Mihir Kumar Sutar (2021). "Tensile properties and regression analysis of natural fiber and intralaminar mat reinforcement". Materials Today: Proceedings, vol. 44(1), pp. 1783-1787. (Scopus).
Sarojrani Pattnaik, Mihir Kumar Sutar (2021). "Analysis of surface roughness of high carbon steel by WEDM". Materials Today: Proceedings, vol. 44(1), pp. 1765-1769. (Scopus).
Prafulla Kumar Sahoo, Sarojrani Pattnaik, Mihir Kumar Sutar (2021). "Investigation of the Foundry Properties of the Locally Available Sands for Metal Casting". Sillicon, https://doi.org/10.1007/s12633-020-00677-x. SCI, Impact Factor:2.670.
Mihir Kumar Sutar, Abinash Nayak. (2020). "Composites and Effects of Discontinuities on Its Performance: A Review", Journal of The Institution of Engineers (India): Series C, vol. 101, pp. 203-217. (Scopus).
Prafulla Kumar Sahoo*, Sarojrani Pattnaik, Mihir Kumar Sutar (2020). Investigation on the Influence of Different Additives on Properties of Green Sand Mould. Materials Science Forum, Vol. 978, pp. 29-33. (Scopus).
Prafulla Kumar Sahoo*, Sarojrani Pattnaik, Mihir Kumar Sutar (2019). "A State-of-the-Art Review on Manufacturing and Additive Influences on Sand-Cast Components". Arabian Journal for Science and Engineering, Vol. 44, pp. 9805-9835. SCI, Impact Factor: 2.334.
Mihir Kumar Sutar, Pushpraj Mani Pathak (2019). Hybrid trajectory/force control strategy for the in vivo robot during stomach biopsy, Journal of the Brazilian Society of Mechanical Sciences and Engineering volume 41, 440, https://doi.org/10.1007/s40430-019- 1954-x, SCI, Impact Factor: 2.22.
Madan Mohan Behera, Sarojrani Pattnaik, Mihir Kumar Sutar (2019). "Thermo-mechanical analysis of investment casting ceramic shell: A case study". Measurement, Vol. 147:106805. SCI, Impact Factor:5.2.
Prabhat Pradhan, Mihir Kumar Sutar, Sarojrani Pattnaik (2019). "A state of the art in Functionally Graded Materials and their Analysis". Materials Today: Proceedings, Vol. 18(7), pp. 3931-3936. (Scopus).
Sasmita Kar, Saojrani Pattnaik, Mihir Kumar Sutar (2019). "Development of Pseudo ductile behavior of carbon fiber reinforced composites-An Overview". Materials Today: Proceedings, Vol. 18(7), pp. 4315-4321. (Scopus).
Alok Ranjan Pradhan, Sarojrani Pattnaik, Mihir Kumar Sutar (2019). "Improving the Filling System for a Defect Free Casting: A Review". Materials Today: Proceedings, Vol. 18(7), pp. 2887-2892. (Scopus).
Sarojrani Pattnaik, Mihir Kumar Sutar (2019). "Graphene Base Nanocomposites: An overview". Materials Today: Proceedings, Vol. 18(7), pp. 5432-5437. (Scopus).
Mihir Kumar Sutar, Sarojrani Pattnaik (2015). â€œNeural Based Controller for Smart Detection of Crack in Cracked Cantilever Beamâ€, Materials Today: Proceedings, vol. 2(4-5), pp. 2648-2653. (Scopus).
Sarojrani Pattnaik, Mihir Kumar Sutar (2015). â€œMulti Objective Optimization of the EMS processed IC by Grey-Fuzzy Methodâ€, Materials Today: Proceedings, vol. 2(4-5), pp. 2555-2563, 2015. (Scopus).
Mihir Kumar Sutar, Pushpraj Mani Pathak, A.K. Sharma, N.K. Mehta, V.K. Gupta (201). â€œInverse Kinematic and Control of 4- Degree of Freedom Wire Actuated In-Vivo Robot,â€ Journal of Systems and Control Engineering, vol. 229(2), pp.77-91, 2015, SCI, Impact Factor- 1.714.
A. Garg, C.S. Vikram, S. Gupta, Mihir Kumar Sutar, P.M. Pathak, A.K. Sharma, N.K. Mehta, V.K. Gupta (2014). â€œDesign and Development of In-Vivo Robot for Biopsy,â€ Journal of Mechanics Based Design of Structures and Machines, vol. 42, pp. 278-295, 2014, SCI, Impact Factor â€“ 2.286.
Mihir Kumar Sutar, P.M. Pathak, A.K. Sharma, N.K. Mehta, V.K. Gupta, (2013). â€œForward Kinematic Analysis of In- Vivo Robot for Stomach Biopsy,â€ Journal of Robotic Surgery, vol. (7), pp. 281- 287. (Scopus)
L. Sardan, Mihir Kumar Sutar, P.M. Pathak (2013). â€œA Geometric Approach for Inverse Kinematics of a 4-link Redundant Manipulator,â€ Robotics & Autonomous System, vol. 61(12), pp. 1306-1313. SCI, Impact Factor- 3.12.
Mihir Kumar Sutar (2012). Finite Element Analysis of a Cracked Cantilever Beam, International Journal of Advanced Engineering Research and Studies, vol.1 (2), pp. 285-289, 2012.
Mihir Kumar Sutar, D.R.K. Parhi (2010). â€œSmart Detection of Damage in a Cracked Cantilever Beam using Artificial Intelligenceâ€. Noise & Vibration Worldwide, vol. 41 (5), pp. 26- 36. (Scopus).
Mihir Kumar Sutar, Sarojrani Pattnaik (2010). â€œVibration Characteristics of a Cracked Cantilever Beam under Free Vibration,â€ Noise & Vibration Worldwide, vol. 41(9), pp. 16- 21 (Scopus).
Sarojrani Pattnaik, Mihir Kumar Sutar (2010). "Supply Chain Integration in Relation to Manufacturing," International Journal of Manufacturing Technology and Industrial Engineering, vol. 1 (1), pp.79- 84.
Effect of Particles on Dynamic Recrystallization behavior of Al-V-N Micro-alloyed Steel medium carbon steel
S.K. BadJena, J.K. Park
Materials Science and Engineering A, 548 (2012) 126 â€“ 133
Dynamic recrystallization behavior of vanadium micro-alloyed forging medium carbon steel”
S.K. BadJena
ISIJ International, Vol. 54 (2014), No. 3, pp. 13 â€“ 20
Optimization of Variables in Grinding Brass Particles for Paint and Pigment Industry
Sushant Kumar BadJena, B.K Mishra
Powder Technology, 214 (2011) 349â€“355
Hydration of Mechanically Activated Granulated Blast Furnace Slag
Rakesh Kumar, Sanjay Kumar, S.K. BadJena and S.P. Mehrotra
Materials & Metallurgical Transaction B, Vol-36, Issue-12, pp-873-88
Particles effect on dynamic recrystallization behavior of hot medium carbon forging steel
S.K. BadJena, A. Lavakumar
Under Review: ISIJ International
Dynamic Recrystallization; Modeling & Microstructure Evolution: A Review
S.K. BadJena, A. Lavakumar
Under Review: International Journal of Materials processing & performance
Analysis of Industrial Data Using Millsoft
S.K. BadJena, B.K Mishra
Under Review: Minerals Engineering
2016: T.J.Jose, A.Simi, M.D.Raju, and P.L.Praveen, Int. J Macro & Nano Phys., 1, 1 (2016).
Â Â Â ISSN: 1111-1113Â
Thermodynamic and Ultraviolet Stabilities of para-azoxyanisole: A Nematic Liquid Crystal
2015: P.L. Praveen, and D.P. Ojha, Mol. Cryst. Liq. Cryst., 606, 75 (2015).
ISSN 1542-1406Â Â Â IF: 0.58Â
Effect of Molecular Interactions and Homologue Number on UV Absorption Spectra of Liquid Crystalline
Alkyl Cyanobiphenyl Dimers: DFT Calculations
P. L. Praveen, and D.P. Ojha, Mol. Cryst. Liq. Cryst., 608, 72 (2015).
ISSN: 0141-1594Â IF: 0.58Â
The Influence of Alkyl Chain Length and Solvents on Configurational Probability of Liquid Crystalline
Materials â€“ A Computational Approach
T.J.Jose, A.Simi, M.D.Raju, and P.L.Praveen, Int. J. Adv. Res. J. Sci. Engg. Technol., 2, 14 (2015).
ISSN: 2393-8021Â IF: 1.918
Liquid Crystalline Carborane Diester Molecules: Structure, Ultraviolet Absorption Spectra Based on DFT and Semiempirical Methods
P.L.Praveen, and Ramakrishna D. S., Int. J. Adv. Res. J. Sci. Engg. Technol., 2, 92 (2015).
Â Â Â ISSN: 2393-8021Â IF: 1.918
Charge Distribution and UV Absorption Spectra of Liquid Crystals with Structural Element [closo-B10H10]2-:
A Theoretical Approach
2014: P.L. Praveen, and D.P. Ojha, Liquid Crystals, 41, 872 (2014).
ISSN: 0267-8292Â IF: 2.486
Photo sensitivity, substituent and solvent-induced shifts in UV-Visible absorption bands of naphthyl-ester
liquid crystals: a comparative theoretical approach
P. L. Praveen and D. P. Ojha, J. Molecular Liquids, 194, 8 (2014).
ISSN: 0167-7322Â Â IF: 2.515
Optical Absorption Behaviour and Spectral Shifts of Fluorinated Liquid Crystals in Ultraviolet Region â€“ A
Comparative Study Based on DFT and Semiempirical Approaches
P.L. Praveen, and D.P. Ojha, J. Molecular Liquids, 197, 106 (2014).
ISSN: 0167-7322Â Â IF: 2.515 Â Â Â Â Â
Effect of molecular interactions and end chain length on ultraviolet absorption and photo stability of
alkoxycinnamic acids: Theoretical models of liquid crystal
P.L. Praveen, and D.P. Ojha, Phase Transitions, 87, 641 (2014).
ISSN: 0141-1594 Â Â Â Â Â Â IF: 1.1Â Â Â Â
Role of Molecular Interactions and End Chain Length on Photo Sensitivity of Liquid Crystalline Alkyl
Cyanobiphenyl Dimers â€“ UV Absorption Based Approach Through DFT Calculations
P. L. Praveen and D. P. Ojha, Phase Trans., 87, 515 (2014).
ISSN: 0141-1594Â Â Â Â Â Â Â Â Â Â Â Â Â Â IF: 1.1Â Â Â Â
Effect of Substituent on UV-Visible Absorption and Photo Stability of Liquid Crystals: DFT Study
2013: P.L. Praveen, and D.P. Ojha, Phase Transitions, 86, 433 (2013).
ISSN: 0141-1594 IF: 1.1Â Â Â Â
Thermodynamic Stability and Phase Behaviour of a Liquid Crystalline Material: A Theoretical Model at
Molecular Level
D. P. Ojha, and P. L. Praveen, J. Phys. Chem. Solids, 74, 1653 (2013).
ISSN: 0022-3697 IF: 1.417Â Â Â Â Â
Theoretical Study on Liquid Crystal Cyanobiphenyls: Phase Stability and Phase Behaviour

13. P. L. Praveen, and D.P.Ojha, Mol. Cryst. Liq. Cryst. 575, 77 (2013).
P. L. Praveen, and D.P.Ojha, Mol. Cryst. Liq. Cryst. 575, 77 (2013).
Â Â Â Â Â ISSN 1542-1406Â IF: 0.58
Role of Molecular Interactions on Phase Stability and Phase Behaviour of a Model Nematogen - A
Thermodynamic Approach.
P. L. Praveen and D. P. Ojha, Mol. Cryst. Liq. Cryst.,571, 30 (2013).
Â Â Â Â Â ISSN 1542-1406Â IF: 0.58
Molecular Structure and Ordering in a Fluorinated Smectogenic Compound-A Statistical Thermodynamic
Approach.
P.L. Praveen and D.P.Ojha, Asian J. Chem., 25, 7813(2013).
ISSN: 0970-7077 IF: 0.27Â
Molecular structure and ordering in biphenyl molecules with strong polar group: A comparative
computational analysis between a mesogen and non-mesogens
2012: P. L. Praveen, and D.P. Ojha, Materials Chem. & Physics, 135, 628 (2012).
ISSN: 0254-0584 IF: 2.259Â Â Â Â Â
Calculation of Spectral Shifts in UV-Visible Region and Photoresponsive Behaviour of Fluorinated Liquid
Crystals: Effect of Solvent and Substituent
P. L. Praveen, and D. P. Ojha, Crystal Res. Technol. 47, 91 (2012).
ISSN: 1521-4079 IF: 1.1 Â Â Â
Substituent and Solvent Effects on UV-Visible Absorption Spectra of Liquid Crystalline Disubstituted
Biphenylcyclohexane Derivatives â€“ A Computational ApproachÂ
P. L. Praveen, and D.P.Ojha, J. Physics & Chemistry of Solids, 73, 57 (2012).
ISSN: 0022-3697 IF: 1.417Â Â Â Â Â
Theoretical Analysis on Phase Behaviour of a Liquid Crystalline Material â€“ Effect of Molecular MotionsÂ
R. Aneela, P.L. Praveen, and D. P. Ojha, J. Molecular Liquids, 166, 70 (2012)
ISSN: 0167-7322 IF: 2.515
Role of Configurational Entropy on Ordering and Phase Organization of Nematic Liquid Crystals â€“ Role
of Configurational Entropy
P. L. Praveen, and D.P. Ojha, Z. Naturforsch, 67a, 210 (2012).
ISSN: 0932-0784 IF: 1.02
Study of Phase Behaviour of N-n-Undecyl-D-Gluconamide having V-Shaped Conformation â€“ A
Molecular Simulation Approach
P. L. Praveen, and D.P.Ojha, J. Molecular Modeling, 18, 1513 (2012).
ISSN: 1610-2940 IF: 1.80
Structure and Electronic Spectra of Mesogenic Alkoxy Cinnamic Acids: A Comparative Study Based on
Semiempirical and DFT Methods
P. L. Praveen, and D. P. Ojha, Romanian J. Phys., 57, 645 (2012).
ISSN: 1221-146X IF: 0.42
Thermodynamic Properties of a Nematogen - A Computational Approac
R. Aneela, P.L. Praveen, and D. P. Ojha, Mol. Cryst. Liq. Cryst., 557, 90 (2012).
ISSN 1542-1406Â IF: 0.58
Computational Analysis of Liquid Crystalline Biphenylcyclohexane Derivatives: Estimation of
Configurational Probability, and Phase Stability
P. L. Praveen, and D.P.Ojha, Mol. Cryst. Liq. Cryst. 557, 206 (2012).
ISSN 1542-1406Â IF: 0.58
Substituents Effect on Electronic Spectral Shifts and Phase Stability of Liquid Crystalline
Biphenylcyclohexane Molecules â€“ A Theoretical Approach
P. L. Praveen, and D.P.Ojha, J. Molecular Liquids. 169, 110 (2012).
ISSN: 0167-7322 IF: 2.515 Â Â Â Â Â
Calculation of Spectral Shifts in UV-Visible Region and Photo Stability of Thermotropic Liquid Crystals:
Solvent and Alkyl Chain Length Effects
P. L. Praveen, and D. P. Ojha, American Inst. Phys. Proc., 1447, 157 (2012).
Â Â Â Â Â ISSN: 1551-7616 Â Â Â Â Â Â Â
Electronic Spectra and Ultraviolet Stability of Nematic Liquid Crystals: Effect of Solvent and Substituen
G. S. Baskaran, P. L. Praveen, and D. P. Ojha, Asian J. Chem., 24, 4471 (2012).
ISSN: 0970-7077 IF: 0.27Â
Influence of Dielectric Medium on Cyano Containing Mesogenic Compound-A Statistical Analysis Based
on Quantum Mechanics and Intermolecular Forces
2011: P. L. Praveen, and D.P.Ojha, Physical Review, E83, 051710 (2011).
ISSN: 1539-3755 IF: 2.6
Computational Analysis on Molecular Properties and Spectral Characteristics of Cyano Containing
Liquid Crystals â€“ Role of Alkyl Chains
P. L. Praveen, and D.P.Ojha, Liquid Crystals, 38, 963 (2011).
ISSN: 0267-8292 IF: 2.486 Â Â Â Â Â
Semiempirical Analysis of Electronic Spectra and Ultraviolet Stability of Nematic Liquid Crystals: Effect
of Solvent and Substituent
P. L. Praveen, and D.P. Ojha, Materials Chem. & Phys., 126, 248 (2011).
ISSN: 0254-0584 IF: 2.259 Â Â Â Â Â
Role of Molecular Rigidity on Phase Organization of a Smectic Liquid Crystal- A Theoretical Model
P. L. Praveen, and D.P. Ojha, J. Molecular Liquids, 158, 27 (2011).
ISSN: 0167-7322 IF: 2.515Â Â Â Â Â
Estimation of Configurational Entropy and Stability of Nematic Phase in Mesogens-Role of Molecular
Interactions
P. L. Praveen, and D.P. Ojha, Mol. Cryst. Liq. Cryst., 537, 64 (2011).
ISSN 1542-1406Â IF: 0.58
Molecular Structure and Conformational Behaviour of a Nematogen-A Statistical Approach
P. L. Praveen, and D.P.Ojha, J. Molecular Liquids, 161, 44 (2011).
ISSN: 0167-7322 IF: 2.515 Â Â Â Â Â
Phase Organization in Laterally Substituted Dicyclohexaethane Derivatives-A Molecular Model for
Smectogens
P. L. Praveen, and D. P. Ojha, Mol. Cryst. Liq. Cryst., 548, 61 (2011).
ISSN 1542-1406Â IF: 0.58
Thermodynamic Stability of Nematic Phase and Configurational Entropy of Mesogens â€“ A Molecular
Simulation Approach
P. L. Praveen, and D.P.Ojha, Mol. Cryst. Liq. Cryst., 548, 209 (2011).
ISSN 1542-1406Â IF: 0.58
Electronic Transition Oscillator Strength and UV Stability of Nematogenic Cyanobiphenyls â€“ Role of
Alkyl Chains
P. L. Praveen, and D. P. Ojha, Russ. J. Phys. Chem. 85, 1756 (2011).
ISSN: 0036-0244 IF: 0.503Â Â Â Â Â
Molecular Interactions and Crystal Packing in a Nematogen-A Computational Thermodynamic
Approach.
2010: P. L. Praveen, and D.P.Ojha, Z. Naturforsch., 65a, 555 (2010).
ISSN: 0932-0784 IF: 1.02Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Computer Simulations of Ordering in a Nematogen-The Role of Dielectric Medium
P. L. Praveen, and D.P.Ojha, Mol. Cryst. Liq. Cryst., 528, 178 (2010).
ISSN 1542-1406Â IF: 0.58Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Ordering of a Strong Polar Nematogen 6CBB in Dielectric Medium-A Computational Analysis.
P. L. Praveen, and D.P.Ojha, Materials Chem. Phys., 123, 147 (2010).
ISSN: 0254-0584 IF: 2.259Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Computer Simulation of ordering in a Bipolar Nematogen H6CBP at Phase Transition Temperature.
P. L. Praveen, and D.P.Ojha, Phase Transitions, 83, 37(2010).
ISSN: 0141-1594 IF: 1.1Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Molecular Ordering in a Bipolar Nematogenic Cyanobiphenyl - A Computer Simulation Approach.
P. L. Praveen, and D. P. Ojha, Mol. Cryst. Liq. Cryst.,533, 92 (2010).
ISSN 1542-1406Â IF: 0.58Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Molecular Order-Disorder Phenomenon of a Nematogen-A Computational Analysis
P.L.Praveen, N.Ajeetha, and D.P.Ojha, Russian J. Phy. Chem., 84, 229 (2010).
ISSN: 0036-0244 IF: 0.503Â Â Â Â Â
Ordering in Homologous Series of 4’-n-Alkyl Cyanobiphenyl (nCB)-A Comparative Computational
P. L. Praveen, and D.P.Ojha, Asian J. Chem., 22, 4075 (2010).
ISSN: 0970-7077 IF: 0.27Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Molecular Ordering in a Nematogen Based on Quantum Mechanics and Intermolecular Forces-A, Computational Analysis.
G. S. Baskaran, P. L. Praveen, and D. P. Ojha, Asian J. Chem. 22, 5730(2010).
ISSN: 0970-7077 IF: 0.27Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Ordering in Nematogenic p-n-Heptyloxy Benzoic Acid-A Computational Study.
G. S. Baskaran, P. L. Praveen, and D. P. Ojha, Int. J. Pure & Appl. Phys. 6, 127 (2010).
ISSN: 0973-1776 IF: 0.23Â Â Â Â Â Â
A Computational Analysis of Ordering in p-n-Octyloxy Benzoic Acid-A Nematogen
V. Gayatri, P. L. Praveen, and D. P. Ojha, Russ. J. Gen. Chem., 80, 2048 (2010).
ISSN: 1070-3632 IF: 0.467Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Computer Simulations of Molecular Organization in a Nematogen â€“ The Role of Thermodynamical Parameters.Â Â Â
2009: P.L.Praveen, N.Ajeetha, and D.P.Ojha, Russian J. Gen. Chem., 79, 2267 (2009).
ISSN: 1070-3632 IF: 0.467Â Â Â Â Â
Ordering in a Smectogenic Schiff Base Compound-A Computational Analysis Based on Intermolecular
Interactions
P.L. Praveen, K.V. B. Reddy, N. Ajeetha, and D.P.Ojha, Crystallography Â Reports, 54, 1197 (2009).
ISSN: 1063-7745 IF: 0.469Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Computational Analysis of Ordering in Non-Liquid Crystalline versus Liquid Crystalline Materials with
Special Reference to nBAC.
P. L. Praveen, and D.P.Ojha, Int. J. Mat. Sci., 4, 469 (2009).
ISSN: 0973-4589 IF: 0.24Â
Mesomorphic Ordering in Liquid Crystalline Materials (BCHs)-A Computational Study Based on
Intermolecular Interactions.
2008: G. S. Bhaskaran, P.L.Praveen, N.Ajeetha, and D.P.Ojha, Bull. of Pure & Appl.Â Sci., 27D, 229 (2008). ISSN: 0970-6569 IF: 0.28 Molecular Ordering in 5OCB based on Quantum Mechanics and Intermolecular Forces Communicated (No. 03)
Communicated: T.J.Jose, A.Simi, M.D.Raju, and P.L.Praveen, J. Optoelectronics & Adv. Mat., (2016) RevisedSubmitted Estimation of Spectral Shifts of Fluorinated Liquid Crystals in Ultraviolet Region: Alkyl Chain Length.Dependence and Correlation in Molecular Structures
P.L.Praveen, Ramakrishna D.S., and D.P.Ojha, Mol. Cryst. Liq. Cryst., (2016) In-Press.
UV Characterization of a Smectic-C Liquid Crystal: Theoretical Support to the Experiment
T.J.Jose, A.Simi, M.D.Raju, and P.L.Praveen, Mol. Cryst. Liq. Cryst., (2016) Submitted.
Estimation of high and low UV intensity profiles of mesogenic oxovanadium (IV) salen complexes: Doubling effect of homologue number
Barick, A.K. and Tripathy, D.K.; Effect of Organically Modified Layered Silicate Nanoclay on the Dynamic Viscoelastic Properties of Thermoplastic Polyurethane Nanocomposites; Applied Clay Science, Volume 52, Issue 3, Pages 312-321, May 2011 (DOI:10.1016/j.clay.2011.03.010, Elsevier, ISSN: 0169-1317, Impact Factor (IF): 2.467).
Barick, A.K. and Tripathy, D.K.; Thermal and Dynamic Mechanical Characterization of Thermoplastic Polyurethane/Organoclay Nanocomposites Prepared by Melt Compounding; Materials Science and Engineering: A Structural Materials: Properties, Microstructure and Processing, Volume 527, Issue 3, Pages 812-823, 15th January 2010 (DOI:10.1016/j.msea.2009.10.063, Elsevier, ISSN: 0921-5093, IF: 2.567).
Barick, A.K. and Tripathy, D.K.; Preparation, Characterization and Properties of Acid Functionalized Multi-Walled Carbon Nanotube Reinforced Thermoplastic Polyurethane Nanocomposites; Materials Science and Engineering: B Advanced Functional Solid-State Materials, Volume 176, Issue 18, Pages 1435-1447, 15th November 2011 (DOI: 10.1016/j.mseb.2011.08.001, Elsevier, ISSN: 0921-5107, IF: 2.169).
Barick, A.K. and Tripathy, D.K.; Effect of Nanofiber on Material Properties of Vapor-Grown Carbon Nanofiber Reinforced Thermoplastic Polyurethane (TPU/CNF) Nanocomposites Prepared by Melt Compounding; Composites Part A: Applied Science and Manufacturing, Volume 41, Issue 10, Pages 1471-1482, October 2010 (DOI:10.1016/j.compositesa.2010.06.009, Elsevier, ISSN: 1359-835X, IF: 3.071).
Barick, A.K. and Tripathy, D.K.; Preparation and Characterization of Thermoplastic Polyurethane/Organoclay Nanocomposites by Melt Intercalation Technique: Effect of Nanoclay on Morphology, Mechanical, Thermal, and Rheological Properties; Journal of Applied Polymer Science, Volume 117, Issue 2, Pages 639-654, 15th July 2010 (DOI:10.1002/app.31303, John Wiley & Sons, Inc., Online ISSN: 1097-4628, IF: 1.768).
Barick, A.K. and Tripathy, D.K.; Effect of Organoclay on the Morphology, Mechanical, Thermal, and Rheological Properties of Organophilic Montmorillonite Nanoclay Based Thermoplastic Polyurethane Nanocomposites Prepared by Melt Blending; Polymer Engineering and Science, Volume 50, Issue 3, Pages 484-498, 11th February 2010 (DOI:10.1002/pen.21556, John Wiley & Sons, Inc., Online ISSN: 1548-2634, IF: 1.520).
Barick, A.K. and Tripathy, D.K.; Effect of Organoclay on Thermal and Dynamic Mechanical Properties of Novel Thermoplastic Polyurethane Nanocomposites Prepared by Melt Intercalation Technique; Polymers for Advanced Technologies, Volume 21, Issue 12, Pages 835-847, December 2010 (DOI:10.1002/pat.1507, John Wiley & Sons, Inc., Online ISSN: 1099-1581, IF: 1.757).
Barick, A.K. and Tripathy, D.K.; Nanostructure Morphology and Dynamic Rheological Properties of Nanocomposites Based on Thermoplastic Polyurethane and Organically Modified Montmorillonite; Polymer Bulletin, Volume 66, Number 9, Pages 1231-1253, May 2011 (DOI: 10.1007/s00289-010-0395-6, Springer, Online ISSN: 1436-2449, IF: 1.438).
Barick, A.K. and Tripathy, D.K.; Preparation and Characterization of Carbon Nanofiber Reinforced Thermoplastic Polyurethane Nanocomposites; Journal of Applied Polymer Science, Volume 124, Number 1, Pages 765-780, 5th April 2012 (DOI:10.1002/app.35066, John Wiley & Sons, Inc., Online ISSN: 1097-4628, IF: 1.768).
Barick, A.K., Jung, J.-Y., Choi, M.-C., and Chang, Y.-W.; Thermoplastic Vulcanizate Nanocomposites Based on Thermoplastic Polyurethane and Millable Polyurethane Blends Reinforced with Organoclay Prepared by Melt Intercalation Technique: Optimization of Processing Parameters via Statistical Methods; Journal of Applied Polymer Science, Volume 129, Number 3, Pages 1405-1416, 5th August 2013 (DOI: 10.1002/app38852, John Wiley & Sons, Inc., Online ISSN: 1097-4628, IF: 1.768).
Barick, A.K. and Chang, Y.-W.; Nanocomposites Based on Thermoplastic Polyurethane, Millable Polyurethane and Organoclay: Effect of Matrix Composition and Dynamic Vulcanization; Journal of Applied Polymer Science, Volume 130, Number 6, Pages 4014-4023, 15th December 2013 (DOI: 10.1002/app.39670, John Wiley & Sons, Inc., Online ISSN: 1097-4628, IF: 1.768).
Barick, A.K. and Chang, Y.-W.; Nanocomposites Based on Thermoplastic Polyurethane, Millable Polyurethane and Organoclay: Effect of Organoclay Content; High Performance Polymers, Volume 26, Number 5, Pages 609-617, 14th July 2014. (DOI: 10.1177/0954008314525972, Sage Publications Ltd., Online ISSN: 1361-6412, IF: 1.286).
Barick, A.K.; Optimization of the Processing Parameters via Statistical Methods for the Thermoplastic Vulcanizate Nanocomposites; Proceedings of the International Conference on Innovative Applications of Chemistry in Pharmacology & Technology(IC-IACPT-2015), Page 55, Berhampur University, Bhanja Vihar, Berhampur, Odisha, India;Â February 06â€“08, 2015. (Poster)
Barick, A.K.; Recent Advances in Halloysite Nanotube Based Polymer Nanocomposites; Proceedings of the National Seminar on Recent Advancement in Material Science (RAIMSâ€“2014), Page 69, VSSUT, Burla, Sambalpur, Odisha, India; August 23â€“24, 2014. (Poster)
Barick, A.K., Tripathy, D.K.; Chang, Y.-W.; Optimization of Processing Parameters via Statistical Approaches for the Melt Blending of Thermoplastic Vulcanizate Nanocomposites; Proceedings of the 5th International Conference on Advancements in Polymeric Materials (APMâ€“2014), Page 89, Bhubaneswar, Odisha, India; February 14â€“16, 2014. (Oral)
Barick, A.K., Jung, J.-Y., Chang, Y.-W., and Tripathy, D.K.; Preparation, Characterization, and Properties of Nanofillers Based Thermoplastic Polyurethane Nanocomposites; Proceedings of the 2012 Word Congress on Advances in Civil, Environmental, & Materials Research (ACEM’12), Pages 177â€“181, Seoul, South Korea; August 26â€“29, 2012. ISBN: 978-89-89639-34-5 98530, 9788989693345 8989693349 (Oral)
Barick, A.K. and Tripathy, D.K.; Preparation and Characterization of Thermoplastic Polyurethane/Carbon Nanotube Nanocomposites; Proceedings of the 18th International Conference on Composite Materials (ICCM18); Jeju Island, South Korea; August 21â€“26, 2011. http://www.iccm-central.org/Proceedings/ICCM18proceedings/data/2.%20Oral%20Presentation/Aug22(Monday)/M01%20Nanocomposites/M1-1-AF0164.pdf (Oral)
Barick, A.K. and Tripathy, D.K.; Preparation and Characterization of Thermoplastic Polyurethane/ Multi-Walled Carbon Nanotube Nanocomposites: Morphology, Mechanical, Thermal, and Rheological Properties; Proceedings of the International Conference on Advances in Polymer Science and Rubber Technology (APSRTâ€“2011), Page 114; Kharagpur, West Bengal, India; March 3â€“5, 2011. (Oral)
Barick, A.K. and Tripathy, D.K.; Morphology, Mechanical, Thermal, and Rheological Properties of Thermoplastic Polyurethane/Multiâ€“Walled Carbon Nanotube Nanocomposites; International Conference on Latests in Polymers (LaPâ€“2010); Kochi, Kerala, India; August 12â€“13, 2010. (Oral)
Barick, A.K. and Tripathy, D.K.; Nanostructured Morphology and Thermal Properties of Carbon Nanofiber Reinforced Thermoplastic Polyurethane (TPU/CNF) Nanocomposites; Proceedings of the International Conference on Advancements in Polymeric Materials (APMâ€“2010), page 63; Bhubaneswar, Odisha, India; February 20â€“22, 2010. (Oral)
Barick, A.K. and Tripathy, D.K.; Microphase Separation, Thermal Degradation Kinetics, Viscoelasticity, and Melt Rheology of Thermoplastic Polyurethane/Carbon Nanofiber (TPU/CNF) Nanocomposites by Melt Mixing; Proceedings of the International Conference on Advances in Polymer Technology (APTâ€“2010), Page 75â€“78; Cochin, Kerala, India; February 26â€“27, 2010. http://psrt.cusat.ac.in/apt10/apt10CD/HTMLS/ORAL/CMP09Aruna%20K.%20Barick.pdf (Oral)
Barick, A.K. and Tripathy, D.K.; Dynamic Mechanical and Rheological Properties of Biomedical Thermoplastic Polyurethane Organoclay Nanocomposites; Second International Conference on Polymer Processing and Characterization (ICPPCâ€“2010); Kottayam, Kerala, India; January 15â€“17, 2010. http://www.processing.macromol.in/abstractspappers.html (Oral)
Barick, A.K. and Tripathy, D.K.; Dynamic Viscoelastic Properties of Biomedical Thermoplastic Polyurethane Nanocomposites; International Congress on Polymer Science and Technology: Vision and Scenario (APAâ€“2009); New Delhi, India; December 17â€“20, 2009. (Poster)
Barick, A.K. and Tripathy, D.K.; Preparation and Properties of Polyurethane/Organoclay Nanocomposites by Melt Blending: Effect of Nanoclay on Mechanical, Thermal, Morphological and Dynamic Mechanical Properties; Proceedings of the 5th International Conference India Rubber Expo 2009 (IREâ€“2009), Page 61â€“65; Kolkata, West Bengal, India; January 28â€“31, 2009. (Oral)
Barick, A.K. and Tripathy, D.K.; Preparation and Properties of Thermoplastic Polyurethane Nanocomposite by Melt Blending: Effect of Organoclay on Mechanical, Thermal, Morphological and Dynamic Mechanical Properties; Proceedings of the International Conference on Advances in Polymer Technology (APTâ€“2008), Page 31; Cochin, Kerala, India; September 25â€“27, 2008. (Oral)
Barick, A.K., Mohanty, S., and Nayak, S.K.; Thermoplastic Starchâ€“filled Polypropylene Nanocomposite: Structure, Interaction and Properties; International Conference on Advances in Polymer Science and Technology (POLYâ€“2008); New Delhi, India; January 28â€“31, 2008. (Oral)
Barick, A.K., Samal, S.K., Mohanty, S., and Nayak, S.K.; Biodegradable and Functionally Superior Polypropylene Thermoplastic Starch Nanocomposites from Melt Blending; Proceedings of the International Conference on Rubber and Rubber Like Materials (ICRRMâ€“2008), Pages 359â€“364; Kharagpur, West Bengal, India; January 8â€“10, 2008. (Oral)
Barick, A.K., Samal, S.K., Mohanty, S., and Nayak, S.K.; Processing and Characterization of Polypropylene/Thermoplastic Starch Blend Nanocomposite; Proceedings of the International and INCCOMâ€“6 Conference on Future Trends in Composite Materials and Processing, Pages 206â€“211; Kanpur, Uttar Pradesh, India; December 12â€“14, 2007. (Oral)
Barick, A.K., Samal, S.K., Mohanty, S., and Nayak, S.K.; Dispersion and Distribution of Organomodified Montmorillonite in Polypropylene (PP) and Ethyleneâ€“Octene Copolymer (EOC) Matrix; Proceedings of the National Conference on Advances in Chemical Engineering and Technology (ACETâ€“2007); Sangrur, Punjab, India; March 26â€“27, 2007. (Oral)
Ramakoti, Ivaturi Siva, Panda, Achyut Kumar, Jal, Soumya and Gouda, Narayan. "Reinforcement of recycled polypropylene by nano lanthana with improved thermal, mechanical and antimicrobial properties" Journal of Polymer Engineering, 2024. https://doi.org/10.1515/polyeng-2024-0070
Siva Ramakoti, I., Gouda, N. & Panda, A.K. Investigation on the thermal, mechanical, and antibacterial properties of polymer nanocomposites from waste polypropylene and cerium oxide nanoparticles. Polym. Bull. (2024). https://doi.org/10.1007/s00289-024-05531-3
Pabitra Mohan Mahapatra, Narayan Gouda, Dipransu Pradhan, Prakash Chandra Mishra, Puspanjali Mishra, Achyut Kumar Panda, Isothermal co-pyrolytic kinetics investigation of polystyrene/polymethyl methacrylate blended Bakelite, Can. J. Chem. Eng. 2024, 1. https://doi.org/10.1002/cjce.25505,
Pabitra Mohan Mahapatra, Dipransu Pradhan, Sachin Kumar, Achyut Kumar Panda, Influence of polypropylene and high-density polyethylene on isothermal pyrolytic degradation of discarded bakelite: Kinetic analysis and batch pyrolysis studies, Process Safety and Environmental Protection, Volume 191, Part A, 2024, Pages 769-779, ISSN 0957-5820, https://doi.org/10.1016/j.psep.2024.08.130.
Pabitra Mohan Mahapatra, Dipransu Pradhan, Sachin Kumar, Achyut Kumar Panda, Isothermal pyrolysis of discarded bakelite: Kinetics analysis and batch pyrolysis studies, Circular Economy, 2024,100102, ISSN 2773-1677, https://doi.org/10.1016/j.cec.2024.100102.
Indra Mohan, Satya Prakash Pandey, Achyut K Panda, Sachin Kumar, Modeling of CI engine performance and emission parameters using artificial neural network powered by catalytic co-pyrolytic renewable fuel, Digital Chemical Engineering, Volume 12, 2024, 100171, ISSN 2772-5081, https://doi.org/10.1016/j.dche.2024.100171.
Panda, A. K.; Mahapatra, P. M. Pyrolytic Conversion of Waste High-Density Polyethylene to Wax: Temperature Optimization and Characterization of Wax. Fine Chemical Engineering 2024, 5, 221-229.
Pabitra Mohan Mahapatra, Supriya Kisan, Soumya Ranjan Dash, Sachin Kumar, Zhitong Yao, Achyut Kumar Panda, Co-pyrolytic investigation of waste bakelite with different thermoplastics using microwave and conventional batch pyrolysis reactor, Sustainable Chemistry for the Environment, Volume 7, 2024, 100119, ISSN 2949-8392, https://doi.org/10.1016/j.scenv.2024.100119
Pabitra Mohan Mahapatra, Sudesna Aech, Pijush Kanti Mandal, Achyut Kumar Panda, Pyrolysis of multilayered plastic packets to hydrocarbon fuel feedstock: Thermal degradation behaviour, kinetics and thermodynamic analysis, and semi-batch studies, Journal of the Energy Institute, Volume 115, 2024, 101690, ISSN 1743-9671, https://doi.org/10.1016/j.joei.2024.101690.
Pragyandeepti Behera, Pabitra Mohan Mahapatra, Gayatri Sabat, Achyut K. Panda, Effect of beeswax and petroleum wax on the thermal degradation behavior, kinetics, and thermodynamics of low-grade coal, Environmental Quality Management, First published:08 February 2024, https://doi.org/10.1002/tqem.22191
Indra Mohan, Sandip Mandal, Achyut Kumar Panda, Ramakrishnan Prakash, Sachin Kumar, An experimental investigation in a CI engine for the performance, emission and combustion characteristics of liquid fuel produced through catalytic co-pyrolysis, Fuel, Volume 363, 1 May 2024 , 130909, https://doi.org/10.1016/j.fuel.2024.130909.
Pabitra Mohan Mahapatra, Prakash Chandra Mishra, Sachin Kumar, Puspanjali Mishra, Achyut Kumar Panda, Investigation of synergetic, kinetics, thermodynamics, and batch studies of polypropylene-bakelite co-pyrolysis, Results in Engineering, Volume 21, March 2024 , 101720.
Ivaturi Siva Ramakoti, Achyut Kumar Panda, Narayan Gouda A brief review on polymer nanocomposites: current trends and prospects, Source, Journal of Polymer Engineering, Volume 43 Issue 8 Pages 651-679. Publisher De Gruyter. Publication date, 2023/9/26
Indra Mohan, Abhisek Sahoo, Achyut K Panda, Sandip Mandal, Sachin Kumar, Screening of modified kaolin catalysts in the catalytic pyrolysis of waste high-density polyethylene: Kinetics and thermodynamic analysis, Artificial Neural Network prediction, batch pyrolysis study and characterization of liquid fuel, Publication date 2023/10/1, Journal of Environmental Chemical Engineering, Volume-11, Issue-5, Pages-111039
Indra Mohan, Achyut K Panda, Sandip Mandal, Sachin Kumar, Co-pyrolysis of Azadirachta indica non-edible seed and waste LDPE: Analysis of kinetic models using thermogravimetric analyser and prediction modeling with Artificial Neural Network (ANN), Fuel, Volume 350,2023, 128765, ISSN 0016-2361, https://doi.org/10.1016/j.fuel.2023.128765. October 2023.
Amar Kumar Das, Taraprasad Mohapatra, Achyut K Panda, Manoranjan Mishra, Sachin Kumar Multi-objective optimization and 4E's analysis of a VCR diesel engine fueled with binary fuel mixtures of diesel and pyrolysis oil derived from different plastics waste, Journal of the Energy Institute, Volume 110, October 2023, 101359.
Pabitra Mohan Mahapatra, Sachin Kumar, Puspanjali Mishra · Achyut Kumar Panda Effect of different thermoplastics on the thermal degradation behavior, kinetics, and thermodynamics of discarded bakelite Environmental Science and Pollution Research, https://doi.org/10.1007/s11356-023-25953-2. Feb 2023.
Satya Prakash Pandey, Satish Kumar Singh, Achyut K. Panda, Sandip Mandal, Sachin Kumar, Catalytic pyrolysis of Argemone mexicana seeds over synthesized TiO2 nanoparticles to produce renewable fuels, Sustainable Energy Technologies and Assessments, Volume 56,2023,103091, ISSN 2213-1388, https://doi.org/10.1016/j.seta.2023.103091. SCOPUS, SCIE March 23
Achyut Kumar Panda, Saroja Kumar Rout, Amar Kumar Das, Optimization of diesel engine performance and emission using waste plastic pyrolytic oil by ANN and its thermoâ€‘economic assessment Environmental Science and Pollution Research, https://doi.org/10.1007/s11356-023-26891-9
Amar Kumar Das, Tara prasad Mohapatra, Achyut Kumar Panda. Multiple response optimization for performance and emission of a CI engine using waste plastic oil and biogas in dual fuel mode operation Amar Kumar Das, Tara prasad Mohapatra, Achyut Kumar Panda. Sustainable Energy Technologies and Assessments 57 (2023) 103170
Pabitra Mohan Mahapatra, Sachin Kumar, Puspanjali Mishra Â· Achyut Kumar Panda Effect of different thermoplastics on the thermal degradation behavior, kinetics, and thermodynamics of discarded bakelite Environmental Science and Pollution Research, https://doi.org/10.1007/s11356-023-25953-2
Vikranth Volli, Ravi Varma, Debalaxmi Pradhan, Achyut Kumar Panda, Raghubansh Kumar Singh, Chi-Min Shu, Thermal degradation behaviour, kinetics, and thermodynamics of Bombax Malabarica seeds through TG-FTIR and Py-GC/MS analysis Sustainable Energy Technologies and Assessments 57 (2023) 103150
Pabitra Mohan Mahapatra, Sachin Kumar, Achyut Kumar Panda, Synergy, kinetics, and thermodynamics analysis in the valorization of waste bakelite through co-pyrolysis with HDPE, Cleaner Engineering and Technology 13 (2023) 100601
Das, A.K., Sahoo, S.S. and Panda, A.K. (2023) â€˜Experimental investigation and analyses of CI engine fuelled with different blends of waste plastic oil and dieselâ€™, Int. J. Exergy, Vol. 40, No. 1, pp.44â€“58
Mahapatra, P.M., Panda, A.K., Ahmed, S. et al. Pyrolysis kinetics and thermodynamics of discarded Bakelite. Korean J. Chem. Eng. (2023). https://doi.org/10.1007/s11814-022-1326-6
GayatriSabat, Narayan Gouda, Pabitra Mohan Mahapatra, RutuparnaMahakhud, Achyut K. Panda, Co-pyrolysis of beeswax with different consumer plastics for synergetic production of sustainable fuel oil Volume 53, Part A, October 2022, 102493.
Sabat, G., Gouda, N., & Panda, A. K. (2022). Pyrolysis of low-rank coal: Thermo-kinetic analysis and product characterization. Environmental Quality Management, 1â€“11. https://doi.org/10.1002/tqem.21911
Mohan, I., Panda, A.K., Volli, V. Sachin K. An insight on upgrading of biomass pyrolysis products and utilization: Current status and future prospect of biomass in India. Biomass Conv. Bioref. (2022). https://doi.org/10.1007/s13399-022-02833-2
GayatriSabat, Narayan Gouda & Achyut K Panda (2022): Effect of coal grade and heating rate on the thermal degradation behavior, kinetics, and thermodynamics of pyrolysis of low-rank coal, International Journal of Coal Preparation and Utilization, DOI: 10.1080/19392699.2022.2096013
Amar Kumar Das,Santosh Kumar Sahu,Achyut Kumar Panda, Current status and prospects of alternate liquid transportation fuels in compression ignition engines: A critical review, Renewable and Sustainable Energy Reviews 161 (2022) 112358
Amar Kumar Das, Achyut K. Panda,Improvement of performance and emission characteristic of waste plastic pyrolytic oil blended diesel fuel in variable compression diesel engine using graphene nano additive Energy & Environment, 1â€“18, 2021
Amar Kumar Das, TaraprasadMohapatra, Achyut K. Panda, Sudhansu S. Sahoo, Study on the performance and emission characteristics of pyrolytic waste plastic oil operated CI engine using response surface methodology, Journal of Cleaner Production 328 (2021) 129646.
Amar Kumar Das, Saroj Kumar Rout, Achyut .K. Panda, Thermolysis of medical plastic wastes using Zeolite A catalyst-Kinetic study, experimental optimization and validation, Accepted in the special edition â€œSustainable environmental processes and technologiesâ€ of Journal of Environmental Engineering and Landscape Management,to be published in March 2022.
Achyut .K. Panda, Satyanarayan Patnaik, and Sachin Kumar, Pyrolysis kinetics of keyboard plastic waste using thermogravimetric analyser to assess its energy potential, Accepted in the special edition â€œSustainable environmental processes and technologiesâ€ of Journal of Environmental Engineering and Landscape Management, to be published in March 2022.
Amar Kumar Das, DulariHansdah, Achyut .K. Panda Thermal balancing and exergetic performance evaluation of a compression ignition engine fuelled with waste plastic pyrolytic oil and different fuel additives, Energy 229 (August 2021) 120629.
Amar Kumar Das; SudhansuSekharSahoo; and Achyut .K. Panda, Production of Waste Plastics Oil and Its Prospective Use in a Variable Compression CI Engine, J. Hazard. Toxic Radioact. Waste, March 2021, 25(3): 04021008 ASCE.
Amrita Roy Chowdhury, Gayatri Sabat, Narayan Gouda, Achyut .K. Panda Production of hydrocarbon rich fuel from abandoned beehive by pyrolysis, Jan/Feb 2021, Environmental Progress & Sustainable Energy.
Sthitapragyan Patnaik, Aruna Kumar Barick, Achyut K Panda, Thermo-catalytic degradation of different consumer plastic wastes by zeolite A catalyst: A kinetic approach, Progress in Rubber, Plastics and Recycling Technology 1-17, Nov. 2020
Narayan Gouda, Achyut .K. Panda,Thermal Degradation of Different Biomass to Fuel: Optimization of Process Parameters by Response Surface Methodology, Bio interface Research in Applied Chemistry, Volume 11, Issue 2, 2021, 8931 â€“ 8945 August 2020.
Amar Kumar Das, ManasRanjanPadhi, DulariHansdah, Achyut .K. Panda, Optimization of Engine Parameters and Ethanol Fuel Additive of a Diesel Engine Fuelled with Waste Plastic Oil Blended Diesel, Process Integration and Optimization for Sustainability, 1-15. DOI 10.1007/s41660-020-00134-7, August 2020.
Amar Kumar Das, Saroj Kumar Rout, DulariHansdah, Achyut .K. Panda Parametric optimization of Medical Plastic wastes conversion into transportation fuel using Mamdani Fuzzy inference Systems (FIS)International Journal of Recent Technology and Engineering (IJRTE), Volume-8 Issue-6, 1438-1446, March 2020.
Amar KumarDas, DulariHansdah,Alok Kumar Mohapatra, Achyut .K. Panda, Energy, exergy and emission analysis on a DI single cylinder diesel engine using pyrolytic waste plastic oil diesel blend, Journal of Energy Institute, 93 (August 2020) 1624-1633
Satyanarayan Patnaik, Sachin Kumar, and Achyut .K. Panda Thermal degradation of corn starch based biodegradable plastic plates and determination of kinetic parameters by isoconversional methods using thermogravimetric analyser.Journal of Energy Institute, 93 (August 2020) 1449-1459.
S.Patnaik, S.Kumar, & Achyut .K. Panda, Thermal degradation of eco-friendly alternative plastics: kinetics and thermodynamics analysis. Environ SciPollut Res 27, 14991â€“15000 (Feb.2020)
Achyut K. Panda1 . Abdullah Alotaibi2,3 . Ivan V. Kozhevnikov2 . N. Raveendran Shiju4Pyrolysis of Plastics to Liquid Fuel Using Sulphated Zirconium Hydroxide Catalyst, Waste and Biomass Valorization, 1-9, 2019
Narayan Gouda, Achyut Kumar Panda Determination of kinetic and thermodynamic parameters of thermal degradation of different biomasses for pyrolysis, Biocatalysis and Agricultural Biotechnology Volume 21, September 2019, 101315
Satyanarayan Patnaik, Sachin Kumar, and Achyut K. Panda Kinetics of Thermal Degradation of Non-Woven Plastics: Model-Free Kinetic Approach, Chemistry Select 2019, 4, 8054 â€“8060
Narayan Gouda, Raghubansh K. Singh, Amar K. Das, Achyut K. Panda Performance, emission, energy, and exergy analysis of CI engine using Kaner seed pyrolysis oil blended diesel, Environ Prog Sustainable Energy. 2019;1â€“10, DOI:10.1002/ep.13269.
Achyut K. Panda,R.K.Singh, D.K.Mishra, â€œThermolysis of waste plastics to liquid fuel A suitable method for plastic waste management and production of value added products- A World prospectiveâ€ Renewable and sustainable energy Reviews, 14 (1) 2010, 233-248.
Gaurav Kumar, Achyut K.Panda, R.K.Singh, Optimization of process for the production of bio oil from eucalyptus wood, International journal â€“Journal of Fuel Chemistry and Technology Vol.2, 2010, 162â€“167
Achyut K. Panda, D. K. Mishra, B.G.Mishra and R. K. Singh, Effect of Sulphuric acid treatment on the physicochemical characteristics of Kaolin clay, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Volume 363, Issues 1-3, 20 June 2010, Pages 98-104.
Achyut K. Pandaand R. K. Singh, Catalytic performances of kaoline and silica alumina in the thermal degradation of polypropylene,Journal of Fuel Chemistry and Technology, 39(3), 2011, 198-202,.
Gouda Narayan, Achyut K Panda., R. K Singh., S. K. Ratha, Pyrolytic conversion of protein rich microalgae Arthrospira platensis to bio-oil, Accepted in Research Journal of Chemistry and Environment, Vol. 22 (12) December, 2018
Achyut Kumar Panda,Thermo-catalytic degradation of different plastics to drop in liquid fuel using calcium bentonite catalyst, International Journal of Industrial Chemistry (2018),Â 9(2), 167-176 https://doi.org/10.1007/s40090-018-0147-2
Narayan Gouda,S.N. Meher,Achyut Kumar Panda, Kinetic study of thermal degradation of microalgae Arthrospira Platensis by isoconversional methods, Research Journal of Chemistry and Environment, 22(2), 2018.SCOPUS UGC 10451, ISSN: 09720626
S. Parida, Achyut Kumar Panda, Surface Activation of Calcium Bentonite by Acid Treatment, International Journal of Research in Chemistry and Environment, Volume 7 Issue 3, July 2017, Pages: 54-60.
Narayan Gouda,R.K. Singh, S.N. Meher, Achyut K. PandaProduction and characterization of bio oil and bio char from flax seed residue obtained from supercritical fluid extraction industry, Journal of the Energy Institute Volume 90, Issue 2, April 2017, Pages 265-275.
Achyut Kumar Panda, Pyrolysis: a sustainable approach for energy recovery from waste plastics and tyres, Journal of sustainable planet, vol.7. No. 2 September 2016.
Sarat Chandra Patra, M. Vijay & Achyut K. Panda, Production and characterization of Bio oil from Gold Mohar (DelonixRegia) seed through pyrolysis process, pages 1-6, Aug 2016, doi=10.1080/01430750.2016.1222958, International Journal of Ambient Energy.
SibaSankarSethi, Sachin Kumar, Achyut K. Panda& R.K. Singh, Valorization of Jatropha seed to fuel and chemical feedstock using a thermochemical conversion process Biofuels, Volume 7, 2016 - Issue 5, 429-435.
Achyut K. Panda,S.Murugan, R.K.Singh,Performance and emission characteristics of diesel fuel produced from waste plastic oil obtained by catalytic pyrolysis of waste polypropylene, Energy Sources A: Recovery, Utilization, and Environmental Effects, Volume 38, Issue 4, 568-576, Feb. 2016.
N.R. Parida, R.K.Patel, A.K. Panda, Effects Coal-based sponge iron industries on the Physico-chemical parameters of water in and around Kuarmunda area of Sundargarh District, Odisha, Volume II, Issue XI, November 2015 IJRSI ISSN 2321 â€“ 2705.
Debashis Das, Achyut K. Panda, Supercritical CO2 Extraction of Active Components of Fenugreek (Trigonellafoenum-graecum L.) Seed International Journal of Pharma Research & Review, July 2015; 4(7):1-9ISSN: 2278-6074
Narayan Gouda, R. K. Singh, R.K.Patel, Achyut K. Panda, Fast pyrolysis of Kaner (Thevetiaperuviana) Seed to Fuel and Chemicals, International Journal of Applied and Analytical Chemistry Vol. 1: Issue 1, 2015, 7-20.
Achyut K. Panda, S.N. Meher, Thermal Degradation of Waste Acrylic Laboratory Ware to Fuel and Chemicals,International Journal on Research Methodologies in Physics and Chemistry (IJRPC), Volume: 2 Issue: 2, 2015, 1-6.Feb 2015.
Suprabhat Seal, Achyut K. Panda, Sachin Kumar,R.K.Singh,Production and characterization of bio oil from cotton seed, Environmental Progress & Sustainable Energy, Volume 34, Issue 2, pages 542–547, March/April 2015.
Achyut K. Panda, R.K.Singh, Conversion of waste polypropylene to liquid fuel using acid-activated kaolin, Waste management and research. Oct;32(10) 2014):997-1004.
Achyut K. Panda, R.K.Singh,Thermo-catalytic degradation of low density polyethylene to liquid fuel over kaolin catalyst, Int. J. of Environment and Waste Management (IJEWM), Inderscience publications Vol. 13, No. 1, 2014 104-114.SCOPUS
Achyut K. Panda, R.K.Singh,Optimization of Process Parameters in the Catalytic degradation of polypropylene to liquid fuel by Taguchi Method, Advanced Chemical Engineering Research(ACER)., Vol:2, Issue: 4, PP.106-112,Science and Engineering Publishing Company 2013
Saroj. K Padhi, Achyut K. Panda, R. K. Singh, Value Added Derivatives Of Glycerol Obtained From Biodiesel Industry: A Review, International Journal of Engineering Research & Technology (IJERT), 2(8), August – 2013.
Achyut K. Panda, R.K.Singh, Experimental Optimization of Process for the Thermo-Catalytic Degradation of Waste Polypropylene to Liquid Fuel, Advances in energy engineering (AEE), Science and Engineering Publishing Company. 1 (3), July 2013.
Achyut K. Panda, R.K.Singh, Optimization of Process Parameters by Taguchi Method: Catalytic degradation of polypropylene to liquid fuel, International Journal of Multidisciplinary and Current Research (IJMCR) July-August: 2013.

Sachin Kumar, Achyut K. Panda, R. K. Singh,â€˜Preparation and characterization of acid and alkaline treated kaolin clayâ€™ Bulletin of Chemical Reaction Engineering & Catalysis 8 (1): 61-69, (2013).

Achyut K. Panda, R.K. Singh, and D.K. Mishra, Thermo-Catalytic Degradation of Thermocol Waste to Value Added Liquid Products, Asian Journal of Chemistry; Vol. 24, Issue No. 12, 5539 - 5542 (2012.

Sachin Kumar, Achyut K. Panda and R.K.Singh, A review on Tertiary recycling of high density polyethylene to fuel, Resources, Conservation & Recycling, 55 (2011) 893– 910, Elsevier publications.

A. Chakrabarti and S. Mohapatra, â€œAlgebraic approaches to series expansion methods of functions with application in water wave problemsâ€, Bull. Cal. Math. Soc., 104 (6), 491â€“508 (2012).

L. Das and S. Mohapatra, "Influence of bottom flexibility on radiation and diffraction problems involving a spherical body in a fluid", Journal of Vibration Engineering & Technologies, 10, 2809-2821 (2022), DOI: 10.1007/s42417-022- 00521-z [SCI, Springer publication].

S. Khuntia, S. Mohapatra and S.N. Bora, "Analytical study of wave diffraction by an irregular surface located on a flexible base in an ice-covered fluid", Meccanica, 56, 335-350 (2021), DOI: 10.1007/s11012-020-01287-y [SCI, Springer publication].

S. Khuntia and S. Mohapatra, "Effects of ice- floe on surface wave interaction with an irregular flexible seabed", European Journal of Mechanics / B Fluids, 84, 357-366 (2020), DOI: 10.1016/j.euromechflu.2020.07.002 [SCI, Elsevier publication]

L. Das and S. Mohapatra, "Analytical study of exciting forces acting on a rigid sphere in a fluid with flexible base surface", ZAMM (Zeitschrift fur Angewandte Mathematik und Mechanik), 1-13 (2020), DOI: 10.1002/zamm.202000052 [SCI, Wiley publication].

L. Das and S. Mohapatra, "Effects of flexible bottom on radiation of water waves by a sphere submerged beneath an ice-cover", Meccanica, 54, 985-999 (2019), DOI: 10.1007/s11012-019-00998-1 [SCI, Springer publication].

M.R. Sarangi and S. Mohapatra, "Hydro-elastic wave proliferation over an impermeable seabed with bottom deformation", Geophysical and Astrophysical Fluid Dynamics, 113, 303-325 (2019), DOI: 10.1080/03091929.2019.1584296 [SCI, Taylor & Francis publication].

M. R. Sarangi and S. Mohapatra, â€œInvestigation on the effects of versatile deformating bed on a water wave diffraction problemâ€ Ocean Engineering, 164, 377-387, (2018), DOI: 10.1016/j.oceaneng.2018.06.039. [SCI, Elsevier publication].

S. Mohapatra, â€œEffects of elastic bed on hydrodynamic forces for a submerged sphere in an ocean of finite depthâ€ ZAMP (Z. Angew. Math. Phys.) 68, 1-16, (2017), DOI: 10.1007/s00033-017-0837-1. [SCI, Springer publication] .

S. Mohapatra and S.N. Bora, â€œWater wave interaction with a sphere in a two-layer fluid flowing through a channel of finite depthâ€, Archive of Applied Mechanics, 79, 725-740 (2009), DOI 10.1007/s00419-008-0248-z [SCI, Springer publication].

S. Mohapatra and S.N. Bora, â€œPropagation of oblique waves over small bottom undulation in an ice-covered two-layer fluidâ€, Geophysical and Astrophysical Fluid Dynamics, 103 (5), 347â€“374 (2009), DOI: 10.1080/03091920903071077 [SCI, Taylor &Francis publication].

S. Mohapatra and S.N. Bora, â€œScattering of internal waves in a two-layer fluid flowing through a channel with small undulationsâ€, Ocean Dynamics, 59, 615â€“625 (2009), DOI 10.1007/s10236-009-0214-5 [SCI, Springer publication].

S. Mohapatra and S.N. Bora, “Water wave radiation by a submerged sphere in a two-layer fluid of finite depth with an ice-cover”, Journal of Advanced Research in Applied Mathematics, 2 (1), 46â€“63 (2010), DOI: 10.5373/jaram.241.102009 [Published by Institute of Advanced Scientific Research, Irvine, California].

S. Mohapatra and S.N. Bora, â€œReflection and transmission of water waves in a two-layer fluid flowing through a channel with undulating bedâ€, ZAMM (Zeitschrift fur Angewandte Mathematik und Mechanik), 91 (1), 46 â€“ 56 (2011), DOI 10.1002/zamm.200800216 [SCI, Wiley publication].

S. Mohapatra and S.N. Bora, â€œExciting forces due to a submerged sphere in an ice-covered two-layer fluid of finite depthâ€, Applied Ocean Research, 34, 187â€“197 (2012), DOI 10.1016/j.apor.2011.07.008 [SCI, Elsevier publication].

S. Mohapatra and S.N. Bora, “Oblique water wave scattering by bottom undulation in a two-layer fluid flowing through a channel”, Journal of Marine Science and Application, 11 (3), 276â€“285 (2012), DOI: 10.1007/s11804-012-1133-2. [Springer publication].

S. Mohapatra and S.N. Bora, â€œOblique wave scattering by an impermeable ocean-bed of variable depth in a two-layer fluid with ice-coverâ€, ZAMP (Z. Angew. Math. Phys.), (2012), DOI 10.1007/s00033-012-0210-3. [SCI, Springer publication].

A. Chakrabarti and S. Mohapatra, “Scattering of surface water waves involving semi-infinite floating elastic plates on water of finite depth”, Journal of Marine Science and Application, 12, 325â€“333 (2013), DOI: 10.1007/s11804-013-1204-z. [Springer publication].

S. Mohapatra, “Scattering of surface waves by the edge of a small undulation on a porous bed in an ocean with ice-cover”, Journal of Marine Science and Application, 13, 167â€“172 (2014), DOI: 10.1007/s11804-014-1241-2. [Springer publication].

S. Mohapatra, “Diffraction of oblique water waves by small uneven channel-bed in a two-layer fluid”, Journal of Marine Science and Application, 13, 255â€“264 (2014), DOI: 10.1007/s11804-014-1255-9. [Springer publication].

S. Mohapatra, “Scattering of oblique surface waves by the edge of small deformation on a porous ocean bed”, Journal of Marine Science and Application, 14, 156â€“162 (2015), DOI: 10.1007/s11804-015-1298-6. [Springer publication].

S. Mohapatra, “The interaction of oblique flexural gravity incident waves with a small bottom deformation on a porous ocean â€“bed: Green’s function approach”, Journal of Marine Science and Application, 15, 112-122 (2016), DOI: 10.1007/s11804-016-1353-y [Springer publication].

S. Mohapatra and M.R. Sarangi, â€œA note on the solution of water wave scattering problem involving small deformation on a porous channel-bedâ€, Journal of Marine Science and Application, 16, (2017), DOI: 10.1007/s11804-017-1392-z. [Springer publication].

S. Mohapatra, â€œThe effect of free-surface tension on scattering of water waves by small bottom undulationâ€ ANZIAM Journal (Australian New Zealand Industrial and Applied Mathematics Journal), 58 (E), E39{80 (2017), DOI: 10.21914/anziam.v58i0.11232. [SCI, Cambridge University press ].

On a generalized class of analytic functions relatedto Bazilevic functions,ACTA ET COMMENTATIONES UNIVERSITATIS TARTUENSIS DE MATHEMATICA Volume 26, Number 2, December 2022 Available online at https://ojs.utlib.ee/index.php/ACUTM

On a Certain Subclass of Analytic Functions using Carlson and Shaffer, Journal of Applied Mathematics and Statistical Analysis, Volume 3 Issue 3,2022 https://doi.org/10.5281/zenodo.7228025

A Certai General Family of Subclasses of Meromorphically Multivalent Functions Associated with Hypergeometric function. Applied Analysis and Optimization, H.M. Srivastava, LaxmipriyaParida and Ashok Kumar Sahoo.

On a Subclass of Analytic Functions Related to a Hyperbola, International Journal of Mathematics and Mathematical Science.Jagannath Patel and Ashok Kumar Sahoo

Hankel Determinant for a class of analytic functions related with Lemniscate of Bernoulli, International Journal of Analysis and Application, Ashok Kumar Sahoo and Jagannath Patel.

Inclusion and Neighborhood Properties of Certain Subclasses of p-valent Analytic Functions of Complex Order. Bulletin of the Korean Mathematical

Society, Ashok Kumar Sahoo and Jagannath Patel On Certain Subclasses of Analytic Functions InvolvingCarlson-Shaffer Operator and Related to Lemniscate ofBernoulli. Journal of Complex Analysis, Jagannath Patel and Ashok Kumar Sahoo.

On certain subclasses of analytic functions associated with the Carlsonâ€“Shaffer operator, Annales Universitatis Mariae Curie-Sklodowska , Sectio-A, Jagannath Patel and Ashok Kumar Sahoo.

Certain subclasses of multivalent uniformly star like and convex functionsinvolving a linear operator. Journal of Computational Analysis and Applications, Jagannath Patel Ashok Kumar Sahoo and N. E Cho

Inclusion and Subordination Properties of Multivalent Analytic Functions Involving Cho-Kwon-Srivastava Operator, Kyungpook Mathematical Journal, Jagannath Patel and Ashok Kumar Sahoo.

On Certain Subclasses of Multivalent Analytic Functionswith Complex Order Involving a Linear Operator, Vietnam Journal of Mathematics, Ashok Kumar Sahoo and Jagannath Patel.

On a Subclass Of p- Valent Analytic Functions Of Complex Order Involving A Linear Operator, Journal of Computational Analysis And Applications, N. E. Cho and Ashok Kumar Sahoo

Certain Subclass of Meromerphic Multivalent Functions, Proceedings of the Jangjeon Mathematical Society, L. Parida, N. E. Cho and Ashok Kumar Sahoo.

Second Hankel Determinant for a New Subclasses of Analytic Functions Involving a Linear Operator, Kragujevac Journal of Mathematics, L. Parida, T. Bulboaca and Ashok Kumar Sahoo.

Coefficient estimates of certain subclasses of analyticfunctions associated with Hohlov operator, Asian Europian journal of Mathematics, P.Gochhayat, A. Prajapati and Ashok Kumar Sahoo

S. K Patra, S. K Paikray, H. Dutta, An inventory model under power pattern demand having trade credit facility and preservation technology investment with completely backlogged shortages, Journal of Industrial and Management Optimization, Doi: 10.3934/jimo.2024020 (In Press; Feb 2024; SCI & SCOPUS),ISSN: 1547-1816/ 1553-166X ; Pub: American Institute of Mathematical Sciences (vol 20; 1-28), I.F-1.2

J Sahoo, BB Jena, SK Paikray, On Strong Summability of The Fourier Series via Deferred Riesz Mean, Problemy Analiza-Issues of Analysis, Vol. 13, No. 2, June, 2024, pp. 128-143, ISSN 2306-3432 (online), 2306-3424 (print),Petrozavodsk State University(SCOPUS, ESCI), I.F-0.4

P. Parida, S. K. Paikray B.B. Jena, Statistical Deferred Weighted Riemann Summability and Fuzzy Approximation Theorems, Sahand Communications in Mathematical Analysis, vol. 21(1), 2024, 327-345, ISSN: 2423-3900, IF 0.66 (SCOPUS); Pbs. University of Maragheh (SCOPUS, ESCI)

S. K. Patra, S.K.Paikray, R. M. Tripathy, A Retailer's Inventory Model for Deteriorating Items under Power Pattern Demand with Shortages Partially Backlogged in both Crisp and Fuzzy Environments, International Journal of Industrial and Systems Engineering, Doi:10.1504/IJISE.2023.10059117; ISSN No. 1748-5045/ 1748-5037 (In Press; 2024; SCOPUS); Pub: Inder Science Publishers (vol. 46)

B.B. Jena, S. K. Paikray, M. Mursaleen, On statistical Riemann-Stieltjes integrablility and deferred Ces`aro summability, Contemporary Mathematics, Manuscript ID: cm-2466, Pub: Universal Wiser Publisher (UWP)I.F. 0.7(SCOPUS, ESCI)

H. Dutta, N. P. Pahari, BB Jena, SK Paikray, On Certain Statistical Convergence Criteria for Martingale Sequences via Deferred Ces`aro Mean with Some Applications, Journal of Nepal Mathematical Society (JNMS), Vol. 7, Issue 1, 2024 (July): pp. 40-60, ISSN: 2616-0153 (Print), 2616-0161 (Online)

B.B. Jena, S. K. Paikray, M. Mursaleen, Uniform convergence of Fourier series via deferred Cesàro mean and its applications, Mathematical Methods in the Applied Sciences, vol. 46, pp. 5286--5298, 2023, ISSN: 0170-4214 / 1099-1476, I.F – 1.18, UGC Jr. No- 4042 (43/339),Pub: Wiley, Hoboken, USA (SCI & SCOPUS) I.F. 3.007

B.B. Jena, S. K. Paikray, M. Mursaleen, On the degree of approximation of Fourier series based on a certain class of product deferred summability means, Journal of Inequalities and Applications, 2023, pp. 1–13, https://doi.org/10.1186/s13660-023-02927-z, ISSN- 1029-242X,UGC Jr. No- 28634 (56/135)- In Press (SCI & SCOPUS), I.F. 2.02; Pub: Springer

B. B. Jena, S. K. Paikray, A new approach to statistical Riemann-Stieltjes integrals, Miskolc Mathematical Notes, 24 (2) 2023, pp. 789-803, 2022, ISSN: 1787-2405, I.F. 0.67, Pub: Miskolc University Press, Hungary (2023, SCI & SCOPUS)

Smita Sonker, N. Devi, B. B. Jena, S. K. Paikray, Approximation and simulation of signals via harmonic Banach summable factors of Fourier series, Mathematical Methods in the Applied Sciences, vol. 46, pp. 13411–13422, 2023, ISSN: 1099 – 1476, I.F – 1.18, UGC Jr. No- 4042 (43/339),Wiley (SCI & SCOPUS) I.F. 3.007

H. M. Srivastava, B.B. Jena, S. K. Paikray, A Certain Class of Equi-Statistical Convergence in the Sense of the Deferred Power-Series Method, AXIOMS, 12 (10), 2023, pp. 1-19, ISSN: 2075-1680, I.F. 1.82, Pub: MDPI,Switzerland (SCI & SCOPUS)

P. Parida, B.B. Jena, S. K. Paikray, A new approach to Korovkin-type theorems based on deferred Nörlundsummability mean, Annals of the University of Craiova-Mathematics and Computer Science Series, vol. 50 (2) 2023, pp. 302-312, ISSN: 1223-6934, IF 1.0 (SCOPUS; ESCI); Pbs. University of Craiova, Romania

P. K. Pattanaik, P. Parida, S. K. Paikray, A Local Properties of Fourier Series via Deferred Riesz Mean, Bol. Soc. Paran. Mat. (BSPM; Boletim Sociedade Paranaense De Matematica), vol. 41, pp. 1–7, 2023, ISSN-2175-1188 (on line), ISSN-0037-8712 doi:10.5269/bspm.62309, www.spm.uem.br/bspm,UGC Jr. No- 15087 (UGC-251/339) (SCOPUS; ESCI), Pub: Soc Paranaense Matematica, Brazil; IF-0.39

D. K. Nayak, S. K. Paikray, A.K. Sahoo, A fuzzy EOQ model for deteriorating items having time dependent demand under partially backlogged shortages, Proceedings of the Jangjeon Mathematical Society, vol. 26 (3), 2023, pp. 269-290, Pub: Published By Jangjeon Mathematical Society, ISSN: 2508-7916 / 1598-7264 (SCOPUS)

B. B. Jena, S. K. Paikray and H. Dutta, Statistically Riemann integrable and summable sequence of functions via deferred Cesaro mean on various new concepts of statistical convergence for sequences of random variables via deferred Cesaro mean, Bulletin of the Iranian Mathematical Society, vol 48 (4), pp. 1293-1309, 2022, ISSN: 1735-8515; 1017-061Xhttps://doi.org/10.1007/s41980-021-00578-8 (2021, Pub: Springer Nature Singapore(SCI & SCOPUS) I.F. 0.76

H. M. Srivastava, B. B. Jena, S. K. Paikray, Deferred Cesaro statistical convergence of martingale sequence and Korovkin-type approximation theorems, Miskolc Mathematical Notes, 23 (1), 2022, pp. 443-456, 2022, ISSN: 1787-2405; I.F. 0.67, Miskolc University Press, Hungary (SCI &SCOPUS)

B. A. Kumar, S. K. Paikray and U. K. Misra, Cost optimization inventory model for deteriorating items with trapezoidal demand rateunder completely backlogged shortages in crisp and fuzzy environment, RAIRO-Operations Research, 56 (2022) ,pp. 1969-1994, ISSN: 0399-0559; Pub: EDP Sciences, France, I.F. 2.08 (1/5/2022; SCI; SCOPUS) IF 2.085

C. Padhy, P. K. Jena, S. K. Paikray, Operator Matrices on the Bergman Space, Filomat, vol. 36 (10) 2022, pp. 3311-3320; ISSN: 0354-5180; Pub: University of Nis, Serbia (SCI; SCOPUS)I.F. 0.988

H. M. Srivastava, B. B. Jena, S. K. Paikray, Some Korovkin-Type Approximation Theorems Associated with a Certain Deferred Weighted Statistical Riemann-Integrable Sequence of Functions, AXIOMS, 11 (2022), ISSN:, 2075-1680, pp. 1-11, Pub: MDPI,SwitzerlandI.F. 1.82 (12.3.22; SCI & SCOPUS)

B. B. Jena, S. K. Paikray, A certain class of statistical convergence of martingale sequences and its applications to Korovkin-type approximation theores, Annals of the University of Craiova-Mathematics and Computer Science Series, 49(1), 2022, pp. 146-157, 2022, I.F. 0.69 (25/6/2022; . ISSN: 1223-6934, Pub: University of Craiova, Romania SCOPUS; ESCI)

B. A. Kumar, S. K. Paikray and B. Padhy, Retailer’s Optimal Ordering Policy for Deteriorating Inventory having Positive Lead Time under Pre-Payment Interim and Post-Payment Strategy, International Journal of Applied and Computational Mathematics, 8 (2022), 1-33, Pub: Springer, ISSN: 2349-5103, I.F. 1.77 (8/2022; SCOPUS) I.F. 2.31

Smita Sonker, B. B. Jena, R. Jindal, S. K. Paikray, A Generalized Theorem on Double Absolute Factorable Matrix Summability, Applied Maths & Information Sciences, 16 (2022), pp. 315-322, ISSN: 1935-0090, I.F. 1.66, (03/2022, SCOPUS)

P. K. Pattanaik, P. Parida, S. K. Paikray, Approximation of Fourier-Laguerre Expansion based on a New Product deferred Summability Means, International Journal of Applied and Computational Mathematics, 8 (4), 2022, 1-10, Springer, ISSN: 2349-5103, I.F. 1.77 (SCOPUS) I.F. 2.31

B. Padhy, P. N. Samanta, S. K. Paikray, U. K. Misra, An EOQ Model for Items having Fuzzy Amelioration and Deterioration, Applied Maths &Information Sciences, 16 (2), 2022, pp. 353-360, ISSN: 1935-0090, I.F. 1.66 (03/2022, SCOPUS)

B. B. Jena, S. K. Paikray and H. Dutta, A new approach to Korvokin-type approximation via deferred Cesaro statistical measurable convergence, Chaos, Solitons and Fractals, 148 (2021), pp. 1--9, 111016, ISSN: 0960-0779 / 1873-2887 Elsevier (SCI & SCOPUS)

B. B. Jena, S. K. Paikray, Statistical Convergence of Martingale difference Sequence via deferred weighted mean Korovkin-type Theorems, Miskolc Mathematical Notes, 22 (1), 2021, pp. 273-286, 2021, ISSN: 1787-2405,Pub: Miskolc University Press, Hungary, (SCI & SCOPUS)

H. M. Srivastava, B.B. Jena, S. K. Paikray, U. K. Misra, Statistical product convergence Martingale Sequencesand its application to Korovkin-type Theorems, Mathematical Methods in the Applied Sciences, DOI:10.1002/mma.7382, vol. 44, 2021, pp. 9600–9610, ISSN: 1099 – 1476,I.F – 1.18, UGC Jr. No- 4042 (43/339), ISSN: 1099 – 1476, Wiley (SCI & SCOPUS)

D. K. Nayak, S. S. Routray, S. K. Paikary, H. Dutta, A fuzzy inventory model for weibull deteriorating items under completely backlogged shortages, Discrete and Continuous Dynamical Systems, vol. 14 (2021), No. 7, pp. 2435-2453, ISSN: 1078-0947 / 1553-5231, American Institute of Mathematical Sciences (SCI & SCOPUS)

C. Padhy, P. K. Jena, S. K. Paikray, Uniqueness of Operators, Miskolc Mathematical Notes, Vol. 22 (2021), No. 2, pp. 831–840, ISSN: 1787-2405, Pub: Miskolc University Press, Hungary (SCI; SCOPUS)

H. M. Srivastava, B.B. Jena, S. K. Paikray, Statistical Riemann and Lebesgue integrable sequence of functions withKorovkin-type approximation theorems, AXIOMS, 10 (2021), pp. 1-16, ISSN: 2075-1680, I.F. 1.82, Pub: MDPI,Switzerland, doi: 10.3390/axioms10030229 (SCI & SCOPUS)

B. B. Jena, S. K. Paikray and H. Dutta, On various new concepts of statistical convergence for sequences of random variables via deferred Cesaro mean, Journal of Mathematical Analysis and Applications, 487 (2020), pp. 1-18, 123950, ISSN: 0022-247X / 1096-0813,Elsevier (SCI; SCOPUS)

H. M. Srivastava, B. B. Jena and S. K. Paikray, Statistical probability convergence via deferred N"{o}rlund mean and its applications to approximation theorems, Revista de la Real Academia de Ciencias Exactas, 114 (2020), pp. 1-14 (RACSAM), 114, (2020), ISSN: 1578-7303/ 1579-1505, Springer (SCI; SCOPUS)

A. A. Das, S. K. Paikray, T. Pradhan and H. Dutta, Statistical (C, 1)(E,_)-summability and associated fuzzy approximation theorems with statistical fuzzy rates, Soft Computing, 24,2020,pp. 10883—10892, ISSN: 1433-7479, IF- , UGC Jr. No- , Springer (SCI & SCOPUS)

H. M. Srivastava, B. B. Jena and S. K. Paikray, Statistical deferred Nörlund summability and Korovkin-type approximation theorem, Mathematics, 8 (2020), Article ID:636, pp. 1-11, Pub: MDPI, Switzerland, ISSN: 2227-7390 (SCI; SCOPUS)

B. A. Kumar, S. K. Paikray and U. K. Misra, Two-storage fuzzy inventory model with time dependent demand and holding cost under acceptable delay in payment, Mathematical Modelling and Analysis, 25 (2020), 441-460, ISSN: 1392-6292 (SCI; SCOPUS)

H. M. Srivastava, B. B. Jena and S. K. Paikray, A certain class of statistical probability convergence and its applications to approximation theorems, Appl. Anal. Discrete Math., vol. 14 (9), 2020, pp. 579-598, ISSN: 1452-8630, IF- 1.07, UGC Jr. No- 49/135, Pub: University of Belgrade, Serbia (SCI & SCOPUS)

B. A. Kumar, S. K. Paikray and H. Dutta, Cost optimization model for items having fuzzy demand and deterioration with two-warehouse facility under the trade credit financing, AIMS Mathematics, 5 (2), 2020, pp. 1603–1620, ISSN: 2473-6988, Pub: American Institute of Mathematical Sciences(SCI & SCOPUS)

P. Parida, S. K. Paikray and H. Dutta, On approximation of signals in $Lip (alpha, r) $-class using the product $(overline{N}, p_{n}, q_{n})(E, s)$- summability means of conjugate Fourier series}, Nonlinear Studies, 27 (2020), 447-455, ISSN: 1359-8678/ 2153-4373, Pub: Cambridge Scientific Publishers (SCOPUS)

C. Padhy, P. K. Jena, S. K. Paikray, Aluthge transform of operators on the Bergman space, Arab. J. Math, 9, 2020

B. B. Jena and S. K. Paikray, Product of Deferred Cesaro deferred weighted Statistical Probability Convergence and Its Applications to Korovkin-type Theorem, Universitas Scientiarum Journal of Faculty of Sciences, Pontificia Universidad, 25 (3), 2020, 409-433, ISSN: 0122-7483 / 2027-1352;UGC: 66/111(ESCI, SCOPUS)

P. Parida, S. K. Paikray and B. B. Jena, Statistical Tauberian theorems for Cesàro integrability mean based on post-quantum calculus, Arab. J. Math., 9, 2020, 653-663, 2020,

B. B Jena, S. K. Paikray, P. Parida, H. Dutta,Results on Tauberian theorem for Cesàrosummable double sequences of fuzzy numbers,Kragujevac Journal of Mathematics, Vol.44, 2020, pp. 495-508, ISSN: 1450-9628, IF-0.46, UGC Jr. No- 48837 (225/339),University of Kragujevac, Faculty of Science(E-SCI & SCOPUS)

M. Patro, S. K. Paikray, B. B. Jena, Absolute Index Norlund Summability of Improper Integrals, TWMS J. App. and Eng. Math., vol.10, Special Issue, 2020, pp. 2- 8, ISSN: 2146-1147, E-ISSN: 2146-1147, IF- , UGC Jr. No- 155/159, Pub:Turkic World Mathematical Soc, Azerbaijan (ESCI & SCOPUS)

B.B. Jena, L. N. Mishra, S. K. Paikray, U. K. Misra, Approximation of Signals by General Matrix Summability with effects of Gibb’s Phenomenon applications to approximation theorems, Bol. Soc. Paran. Mat. (BSPM), Vol. 38, 2020, pp. 141–158,ISSN-2175-1188 (on line), ISSN-0037-8712, IF-0.39, UGC Jr. No- 15087 (UGC-251/339) Pub: Soc Paranaense Matematica, Brazil, (SCOPUS; ESCI)

A.A. Das, S. K. Paikray, P.Parida, U. K. Misra, Degree of approximation in the generalized Lipschitz class via - product summability means of Fourier series of a signal belonging to - class, TWMS J. App. and Eng. Math. Vol. 10, Special Issue, 2020, pp. 53-62, ISSN: 2146-1147, E-ISSN: 2146-1147, IF- , UGC Jr. No- 155/159, Pub:Turkic World Mathematical Soc, Azerbaijan (ESCI & SCOPUS)

P. K. Pattnaik, S. K. Paikray and B.B. Jena, GeneralisedNorlund and Norlund types means of Sequences of fuzzy numbers, EJPAM., vol. 13 (5), 2020, pp.1088-1096, ISSN: 1307-5543, IF- 1.07, UGC Jr. No-, Pub: New York Business Global, United States(ESCI & SCOPUS)

A. A. Das, S. K. Paikray, V. N. Mishra And P. Parida, A certain class of equi-statistical convergence based on (p; q)-integers via deferred Norlund mean and related approximation theorems, Analysis in Theory and Applications, vol. 36 (2020), 1-24, ISSN: 1672-4070 / 1573-8175, IF- , UGC Jr. No- , Pub: Global Science Press, Peking University and Nanjing University (ESCI &SCOPUS)

S. K. Paikray, P. Parida and S. A. Mohiuddine, A certain class of relative equistatistical Fuzzy approximation theorems, EJPAM., vol. 13 (5), 2020, pp. 1212-1230, ISSN: 1307-5543, IF- 1.07, UGC Jr. No-, New York Business Global, USA (ESCI & SCOPUS)

P. Parida, S. K. Paikray, B.B. Jena, Generalized Deferred Cesaro Equi-statistical Convergence and Analogous Approximation, Proyecciones Journal of Mathematics, Vol. 39 (2), (2020) 317-339. ISSN: 0716-0917, IF-0.70, UGC Jr. No-32021 (149/339), Pub: Universidad Catolica Del Norte, ISSN:0716-0917 / 0717-6279(SCOPUS up to 2023)

M. Patro, S. K. Paikray, H. Dutta, Statistical Deferred Euler Summability Mean and Associated Korovokin-type Approximation Theorem, Science & Technology Asia, vol. 25, 2020, 31-37, ISSN: 2586-9000, UGC: 182/203, Pub: Pontificia Univ Javeriana, Colombia (SCOPUS)

B.B. Jena, S. K. Paikray, U. K. Misra, Strong Riesz summability of Fourier series, Proyecciones Journal of Mathematics, Vol. 39 (6), (2020), 1615-1626. ISSN: 0716-0917, IF-0.70, UGC Jr. No-32021 (149/339), Pub: Universidad Catolica Del Norte, ISSN:0716-0917 / 0717-6279(SCOPUS up to 2023)

M. Patro, S. K. Paikray, U. K. Misra, On generalised Absolute Indexed Cesaro Summability of Improper Integrals, Applied Analysis and optimization, Vol.4 (3), 2020, pp. 291--298, ISSN: 2432-1656 / 2432- 1664, UGC Jr. No- , Yokohama Publishers (ESCI)

B. B. Jena, S. K. Paikray, Product of Statistical Probability Convergence and Its Applications to Korovkin-type Theorem, Miskolc Mathematical Notes, 20 (2), pp. 969-984, 2019 (SCI & SCOPUS)

H. M. Srivastava, B. B. Jena and S. K. Paikray, Deferred Cesaro statistical probability convergence and its applications to approximation theorems, J. Nonlinear Convex Anal. Vol 20 (9), 1777-1792, 2019, ISSN: 1345-4773, IF-1.07, UGC Jr. No -87/135, University of Belgrade(SCI & SCOPUS)

Amjed Zraiqat, S. K. Paikray and H. K. Dutta, A Certain Class of Deferred Weighted Statistical B-Summability Involving (p; q)-Integers and Analogous Approximation, Filomat, 33 (5), pp. 1425-1444, 2019, ISSN: 03545180, IF- 0.78, UGC Jr. No- 29375 (124/339), University of Nis (SCI & SCOPUS)

B. B. Jena, S. K. Paikray, S. A. Mohiuddine, V. N. Mishra, Relatively equi-stiaistical convergence via deferred Norlund mean based on difference operator of fractional order and related approximation theorems, AIMS Mathematics, 5 (1), 2019, pp. 650-672, ISSN: 2473-6988, Pub: American Institute of Mathematical Sciences(SCI & SCOPUS)

H.M. Srivastava, B.B. Jena, S. K. Paikray, Statistically and deferred weighted summability and Korvokin-type approximation theorems, Symmetry, 11: 4 (2019), 1-20, ISSN: 1487 – 150, IF-2.38, UGC Jr. No- UGC-24/339, Multidisciplinary Digital Publishing Institute (MDPI)(SCI & SCOPUS)

T. Pradhan, S. K. Paikray, B.B. jena, Hemen Dutta, On approximation of the rate of convergenceof Fourier series in the generalized Holder metric by deferred Norlund mean, Afrika Mathematika, 30, 2019, pp. 1119-1131, ISSN: 1012-9405, IF-0.66, UGC Jr. No- 153/339, Springer (ESCI & SCOPUS)

P. Parida, S. K. Paikray, M. Dash, U. K. Misra, Degree of approximation by product -summability of Fourier series of a signal belonging to - class, TWMS (Turkic World Mathematical Society), Vol 9 (4), 2019, 901-908, ISSN: 2146-1147, E-ISSN: 2146-1147, IF- , UGC Jr. No- 155/159, Turkic World Mathematical Soc, Azerbaijan, Az 1148 (ESCI & SCOPUS)

T. Pradhan, S. K. Paikray, A. A. Das, Hemen Dutta, On approximation of functions in the generalized Zygmund class via summability means of conjugate Fourier series, Proyecciones Journal of Mathematics, 38 (5), pp. 1015-1033, 2019, ISSN: 07160917, IF-0.70, UGC Jr. No-32021 (149/339), publisher Departamento De Matematicas, Universidad Catolica Del Norte (E-SCI & SCOPUS)

L. N. Mishra, M. Patro, S. K. Paikrayand B. B. Jena, A certain class of statistical deferred weighted A-summability based on (p; q)-integers and associated approximation theorems, Applications and Applied Mathematics-an International Journal, vol. 14 (2), pp. 716-740, 2019, ISSN: 1932-9466, IF- UGC Jr. No- ,Prairie View A & M Univ, Dept Mathematics, Ms 2225, Po Box 519, Prairie View, Usa, Tx, 77446(ESCI & SCOPUS)

H. M. Srivastava, B.B. Jena, S. K. Paikray, U. K. Misra, A Certain Class of Weighted Statistical Convergence and Associated Korovkin Type Approximation Theorems Involving Trigonometric Functions, Mathematical Methods in the Applied Sciences, vol. 41, 2018-2017, pp. 671-683, ISSN: 0170-4214 / 1099-1476, UGC Jr. No- 4042 (43/339), Pub: Wiley, Hoboken, USA (SCI & SCOPUS) I.F. 3.007

B. B. Jena, S. K. Paikray, U. K. Misra, Statistical deferred Cesarosummability and its applications to approximation theorems, Filomat, Vol. 32, 2018, pp. 2307-2319, ISSN: 0354-5180,UGC Jr. No- 29375 (124/339), IF- 0.695, University of Nis (SCI & SCOPUS)

H. M. Srivastava, B. B. Jena, S. K. Paikray, U. K. Misra, Generalizedequi-statistical convergence of the deferred Nörlund summability and its applications to associated approximation theorems, Revista de la Real Academia de Ciencias Exactas (RACSAM), Vol. 112, 2018, pp. 1487-1501, ISSN: 1578-7303/ 1579-1505, IF- 1.23, UGC Jr. No- 29375(27/91), Springer Nature (SCI & SCOPUS)

T. Pradhan, S. K. Paikray, B. B. Jena, H. Dutta, Statistical deferred weighted B-summability and its applications to associated approximation theorems, Journal of Inequalities and Applications, 65, 2018, pp. 1 – 21, ISSN- 1029-242X,UGC Jr. No- 28634 (56/135), Springer Nature (SCI & SCOPUS)

P. Parida, S. K. Paikray, H. Dutta, B. B. Jena, M. Dash, Tauberian theorems for Cesàro summability of nth sequences, Filomat, vol. 32 (6), 2018, pp. 2307-2319,ISSN: 0354-5180,UGC Jr. No- 29375 (124/339), IF- 0.695, University of Nis (SCI & SCOPUS)

H. M. Srivastava, B. B. Jena, S. K. Paikray, U. K. Misra, Deferred Weighted A-Statistical convergence based upon (p, q)-Lagrange polynomials and its’ Application to Approximation Theorems, Journal of Applied Analysis, Vol. 24 (1), 2018, pp. 1-16, ISSN: 1425-6908 / 1869-6082, I.F – 0.966, UGC Jr. No- 21348 (383/460),Walter de Gruyter (ESCI & SCOPUS)

B.B. Jena, Vandana, S. K. Paikray, U. K. Misra, On Generalised Local Property of summability of Factored Fourier Series, International Journal of Analysis and Applications, Vol. 16 (2), 2018, p.p. 209-221, ISSN- 2291-8639, PUB: Etamaths Publ, Canada UGC Jr. No- 95/248 (ESCI).

B. B. Jena, S. K. Paikray, U. K. Misra, Double Absolute Indexed Matrix Summability with Its applications, Tbilisi Mathematical Journal,Vol. 11, 2018, pp. 1-18, ISSN: 2667-9930, I.F – 1.118, UGC Jr. No- 46810(149/159), Pub: Tbilisi Centre for Mathematical Sciences, Georgia (ESCI/ SCOPUS up to 2023)

S. K Patra, SK Paikray, B. Anil Kumar, A Retailer’s Deteriorating Inventory Model with Amelioration and Permissible Backlogging Under Power Pattern Demand, Journal of the Indian Society for Probability and Statistics, 2024, pp. 1-23, Doi: https://doi.org/10.1007/s41096-024-00192-x (In Press; May 2024,ISSN: 2364-9569; Pub: Springer India, I.F-0.8 (SCOPUS, ESCI)

A. A. Das, S. K. Paikray,T. Pradhan and H. K. Dutta, Approximation of signals in the weighted Zygmundclass via Euler-Hausdorff product summability mean ofFourier series, Journal of the Indian Mathematical Society, vol. 87 (1-2), pp. 22-36, 2020, ISSN- 0019-5839, IF- 0.13UGC Jr. No- 317/430, (SCOPUS)

B.B. Jena, S. K. Paikray, U. K. Misra, Approximation of periodic functions via statistical B-summability and its applications to approximation theorems, Indian Journal of Industrial and Applied Mathematics 10 (2019), 71-86, ISSN: 0973-4317, Indian Society for Industrial and Applied Mathematics (ICI)

T. Pradhan, S. K. Paikray,U. K. Misra,Onapproximation of signals in the generalisedZygmund class via summability means of Fourier series, Indian Journal of Industrial and Applied Mathematics 10 (2019), 152-164, ISSN: 0973-4317, Indian Society for Industrial and Applied Mathematics (ICI)

A. A. Das, B. B. Jena, S. K. Paikray and R. K. Jati, Statistical deferred weighted summability and associated Korovkin-type approximation theorem, Nonlinear Sci. Lett. A, Vol.9, No.3, pp.238-245, September 2018, ISBN- 2519-9072 (Online), 2076-2275 (Print) ESCI

B.B. Jena, S. K. Paikray, U. K. Misra, Inclusion Theorems on general convergence and statistical convergence of â€“summability using generalized Tauberian condition, Tamsui Oxford journal of Information and Mathematical science (UGC Approved), Vol. 31, No. 1, pp. 101 -115, 2017, Aletheia University. ISSN: 2222 â€“ 4424, SCOPUS. I.F â€“ 0.46

V. N. Misra, S. K. Paikray, P. Palo, P. N. Samanta, M. Misra, U. K. Misra, On double absolute factorable matrix summability, Tbilisi Mathematical Journal, De Gruyter, vol. 10, issue 4, pp. 29 â€“ 44, 2017, DOI 10.1515/tmj-2017-0043. (UGC Approved), ISBN- 15120139, UGC Jr. No- 46810. ESCI, I.F â€“ 1.118

S. K. Paikray, P. K. Das, P. N. Samanta, M. Misra, U. K. Misra, Double absolute matrix summability methods, International Journal of Advance Research in Science and Engineering (UGC Approved), vol. 6, issue 9, pp. 1555 â€“ 1560, Sept. 2017, ISSN: 2319 â€“ 8346.

L.D. Jena, S. K. Paikray, M. Dash, Approximation of conjugate Fourier series of a function belonging to the class class using - summability method, International journal of Engineering, Science and Mathematics (UGC Approved), vol. 6, issue 6, pp. 18 -25, October, 2017, ISSN: 2320 â€“ 0294.

A. Pany, S.K. Paikray, S. Padhy, A.K. Pany, Backward Euler Schemes for the Kelvin-Voigt Viscoelastic Fluid Flow Model, International Journal of Numerical Analysis and Modelling,Volume 14, Number 1, Pages 126 - 151, 2016, IF: 0.515, ISSN: 1705 - 5105, Global Science Press, Canada https://www.math.ualberta.ca/ijnam, ISSN: 1705 â€“ 5106, UGC Approved), UGC Jr. No- 23229. SCI & SCOPUS

S. K. Paikray, B. Majhi, P. N. Samanta,U. K. Misra, On double Absolute Factorable Matrix Summability, Journal of Indian Academy of Mathematics, Indore. Vol. 39, No.2 (2017), p.p. 175-202, ISSN 0970-5120, (UGC Approved), UGC Jr. No- 28597.

S. Misra, U. K. Misra, S. Barik, S. K. Paikray, Optimal control of an inventory system for weibull ameliorating, deteriorating items under the influence of inflation, Bulletin of Pure and Applied Sciences Vol: 30-E (Math and Stat) Issue (1), 2011, PP-85-94, ISSN: 0970-4639, (UGC Approved), UGC Jr. No. 9850, IF: 0.011.

U. K. Misra, N. C. Sahoo, S. K. Paikray, A Note on -Summability, Journal of Indian Academy of Mathematics, Indore. Vol.30, No.2 (2008), p.481-487, ISSN 0970-5120, (UGC Approved), UGC Jr. No- 28597.

U. K. Misra, N. C. Sahoo, S. K. Paikray, Summability of a series by Metho, Indian Journal of Mathematics and Mathematical Science, Vol.3, No.2, (December, 2007), p.117-126, ISSN 0973-3329, (UGC Approved).

B.B. Jena, S. K. Paikray, U. K. Misra, A Proof of Tauberian Theorem For Double Cesaro Summability Method, International Journal of Mathematics and Mathematical Sciences, vol. 2016, pp. 1- 4, ISSN: 0161 â€“ 1712, www.hindawi.com, Hindawi Publishing corporation, New York, NY 10017, USA, SCOPUS.

S. K. Paikray, Degree of Approximation by product Summability of Fourier Series of Function Lipschitz Class, Asian Journal of Current Research (UGC Approved), vol 1(3), pp. 108-113, ISSN: 2395 â€“ 4213, www.ikpress.org, International Knowledge Press, 2016, SCI Mago

T. Pradhan, S. K. Paikray, U. K. Misra, Approximation of Signals Belonging to Generalized Lipschitz Class -Summability Mean of Fourier Series, Cogent Mathematics (2016), 3: 1250343 http://dx.doi.org/10.1080/23311835.2016.1250343, ISSN: 2331-1835

L.D. Jena, S. K. Paikray, M. Dash, U. K. Misra, Local Property of Factored Fourier Series by Indexed Norlund Summability, International Mathematical Forum, Vol. 11, pp. 867-874. Hikari Ltd. 2016 http://dx.doi.org/10.12988/imf.2016.6681, www.m-hikari.com.

L.D. Jena, S. K. Paikray, M. Dash, U. K. Misra, A note on summability of a series, Asian Journal of Current Research, Vol 1(1), pp. 39-45, www.ikpress.org, International Knowledge Press, 2016, SCOPUS, SCI Mago

RK Jati, S.K. Paikray, U. K. Misra, B.B. Jena Absolute Indexed matrix summability of an infinite series, Asian Journal of Mathematics and Computer Research, Vol 11, issue 1, pp. 46 - 56, International Knowledge Press, 2016, ISSN: 2395-4205 (P), ISSN: 2395-4213 (O), www.ikpress.org , SCOPUS, SCI Mago

S. K. Indrajit, S. Routray, S.K. Paikray, U. K. Misra, Fuzzy Economic Production Quantity model with Time Dependent demand rate, Scientific Journal of Logistics, LogForum, vol. 12 (3), 2016, pp. 193-198, ISSN- 1895-2038, DOI: 10.17270/J.LOG.2016.3, Publishing agency- Poznan School of Logistics, Poland, http://www.logforum.net.

Sunita Sarangi, S. K. Paikray, Minakshi Dash, U. K. Misra, Two absolute indexed Summability methods, Journal of advances in Mathematics, Council for innovative Research, vol. 13, Issue 3, 2016, ISSN: 2347-1921, USA, global publishing and certification system, www.cirworld.com

B.B. Jena, S. K. Paikray, U. K. Misra, A Proof of Tauberian Theorem For Cesaro Summability, Asian Journal of Mathematics and Computer Research, Vol 8, issue 3 pp. 272 - 276, International Knowledge Press, 2016, ISSN: 2395-4205 (P), ISSN: 2395-4213 (O), SCOPUS, SCI Mago

S. Barik, S. K. Paikray, S. Misra, U. K. Misra, A Deteriorating Inventory Model with shortages under price dependant Demand and Inflation, Asian Journal of Mathematics and Computer Research, vol. 8, Issue 1, pp. 14-25, International Knowledge Press, 2016, ISSN: 2395-4205 (P), ISSN: 2395-4213 (O)., SCOPUS, SCI Mago

Sunita Sarangi, S. K. Paikray, Minakshi Dash, U. K. Misra, Local Property of a Factored Fourier Series Using Absolute Norlund Indexed-Summability, Journal of progressive Research in Mathematics (JPRM), Vol. 6, issue 1, pp. 671 -680, Scitech, Dec 2015, ISSN: 2395 â€“ 0218. Scitech Research Organisation pbs

S. Routray, S.K. Paikray, S. Mishra, U. K. Misra, A Model of Deteriorating Items with Price Dependant Demand Rate, International Journal of research and Review in applied sciences(IJRRS), vol. 25 (2), Nov 2015, pp. 44-49, ISSN 2076-334. Academic Research publishing agency

S. Barik, S. K. Paikray, S. Misra, U. K. Misra, An Inventory Model for Deteriorating Items under Time Varying Demand Condition, International Journal of Applied Engineering Research, vol. 10, Issue 15, pp. 35770-35773, Research India Publications, 2015, ISSN: 0973-4562 (UGC Approved), UGC Jr No. 64529. SCOPUS.

Sunita Sarangi, S. K. Paikray, Minakshi Dash, U. K. Misra, An Application of -Quasi Monotone Sequence, Global Journal of Pure and applied Mathematics, vol.11, Issue 5, pp. 2813-2823, Research India Publications, 2015, ISSN: 0973-1768, ISSN: 0973-1768. IF 2.38, SCOPUS.

S. Barik, S. K. Paikray, S. Misra, U. K. Misra, An Inventory Control Model of Deteriorating Items in Fuzzy Environment, Global Journal of Pure and applied Mathematics, Vol. 11, Issue 3, pp. 1301 â€“ 1315, 2015, ISSN: 0973-1768. IF 2.38, SCOPUS.

R. K. Jati, S. K. Paikray, U. K. Misra, On indexed Summability of a factored Fourier series through Local Property, International Journal for Research in Science and Technology, 2(2), pp. 34-39, Science and Engg. Research, 2015, ISSN: 4349-0845.

S. Barik, S.K. Paikray, R. K. Jati, Inventory models for deteriorating items for non linear holding cost with time dependant demand, Journal of Advances in Mathematics, 9(6), pp. 2705-2709, Council for Innovative Research, 2014, ISSN:2347-1921(UGC Approved).

R. K. Jati, S.K. Paikray, U. K. Misra, On degree of approximation by Product means of the Fourier series of a function of Lipchitz class, International journal of adv computational theory and Engg.(IJACTE), Ird India, 3(5), pp. 57-63, 2014,2319-2516.

S. Routray, S.K. Paikray, U. K. Misra, A note on optimal order level for deteriorating items with uniform demand rate, Proceedings of Jangjeon Mathematical Society, 17(3), pp. 403-409, 2014, ISSN: 1598-7264, (UGC Approved), UGC Jr. 38600, No. IF: 0.035, SCOPUS.

S. Barik, S. Misra, S. K. Paikray, U. K. Misra, An Inventory Model for Weibull Ameliorating, Deteriorating Items under the Influence of Inflation, International journal of engg. Research and applications,Vol. 3, Issue 6, Nov-Dec 2013, pp.1430-1436, ISSN : 2248-9622

M. Mallik, S. Misra, S. K. Paikray, U. K. Misra, Optimal Inventory Control for Ameliorating, Deteriorating Items under Time Varying Demand Conditions, journal of Social Science Research, vol. 3, No. 1, 2013,pp 166-174,ISSN : 2321-1098

Sunita Sarangi, S. K. Paikray, Minakshi Dash, U. K. Misra, Degree of approximation of Fourier series by Hausdorff and Norlund product means, Journal of Computation and Modeling, Vol 3, No. 1, pp. 145-152, 2013, ISSN: 1792-8850.

S. K. Paikray, R. K. Jati, U. K. Misra, N. C. Sahoo, Absolute indexed Summability factor of an infinite series using Quasi-f-power increasing sequence published in the Journal of Engg. Mathematics letters, Vol-2, No.1 p.p 56-66, 2013, ISSN: 2049-9337.

S. K. Paikray, R. K. Jati, U. K. Misra, N. C. Sahoo, On degree of approximation of Fourier series by product means, Journal of General Mathematics Notes, Vol-13, No-2, p.p.22-30, Dec 2012, ISSN: 2219-7184, (UGC Approved).

S. K. Paikray, R. K. Jati, U. K. Misra, N. C. Sahoo, On degree of approximation by product means of conjugate series of a Fouries series, Publised in Bulletin of Society for Mathematical Services and Standards, Volume1, No-4(2012) P.P-12-17. ISSN: 2270-8020.

S. Misra, U. K. Misra, S. Barik, S. K. Paikray, An inventory model for inflation indiced demand and Weibull deteriorating items, International Journal of Advances in Engg. And Technology, (IJET) Vol: 4, Issue: 1 July: 2012, PP: 176-182, ISSN: 2231-1963.

S. K. Paikray, R. K. Jati, U. K. Misra, N. C. Sahoo, A Note on -Summability, International Journal of computer and mathematical sciences, Vol-3, Issue-3, June: 2012, PP: 320-328, ISSN: 0976-5727, (UGC Approved).

S. K. Paikray, U. K. Misra, N. C. Sahoo, Absolute Banach Summability of a factored Cojugate series, General Math. Notes, Volume -9, No: 2, Apr: 2012, PP: 19-31, ISSN: 2219-7184, (UGC Approved).

S. Misra, M. Mallick, U. K. Misra, S. K. Paikray, An EOQ Model for both ameliorating and deteriorating items under the influence of inflation and time value of money, Journal of Computations and Moddelling, Vol:1, No. 1, 2011, PP 101-113, ISSN.1792-7625.

S. Misra, S. Barik, U. K. Misra, S. K. Paikray, A Deterministic Inventory Model for Items with Three Storage Facilties, International Journal of computer and mathematical sciences, Vol.-2(1), 111-116(2011), ISSN 0976-5727, (UGC Approved).

S. K. Paikray, U. K. Misra, N. C. Sahoo, Absolute Banach Summability of a factored Fourier series, International Journal of research and Review in applied sciences(IJRRS), vol. 7 (3), June 2011, pp-266-276.ISSN 2076-334.

S. K. Paikray, U. K. Misra, N. C. Sahoo, Triangular Matrix Summability of a Series, African Journal of Mathematics and Computer Science Research, Vol. 4 (4), pp. 164-169, April, 2011, ISSN 2006-9731.

S. K. Paikray, U. K. Misra, N. C. Sahoo, Product Summability of an Infinite Series, International Journal of computer and mathematical sciences, Vol-1, (7),853-863, 2010, ISSN. 0976-5727., (UGC Approved).

Applied Science Periodical, India
J.P. Panda, S.S.Das and G.C.Dash Unsteady free convection MHD flow and mass transfer in a rotating porous medium Vol. VI, No.3,pp.165-178,2004

B.Senapati, S.Kisan, S.P. Biswal and A. Pattanaik, “ Gray Medical Image Compression Using Fractal Concepts”, International Journal of Scientific Research in Computer Science, Engineering and Information Technology, 2018 IJSRCSEIT Volume 3 Issue 3 ISSN : 2456-3307

S.Kisan, S.N. Mishra and S. Mishra, “ A Survey on Applications of Fractal Dimension upon Various Image Processing Applications”, International Journal of Advanced Research in Computer and Communication Engineering, Vol. 5, Issue 9, September 2016, ISSN (Online) 2278-1021 ISSN (Print) 2319 5940, pp 44-47

S.Kisan & M.Priyadarshini “Relative improved differential box-counting approach to compute fractal dimension of gray-scale images”, International Journal of Engineering Research and General Science Volume 3, Issue 1, January-February, 2015 ISSN 2091-2730.

Sachin Tripathi, Sumitra Kisan , “Algorithm Removal of Digital Envelopes in SET Protocol Using Diffie- Hellmann Key Exchange”, Proceedings of the World Congress on Engineering 2012 Vol IWCE 2012, July 4 - 6, 2012, London, U.K.

Sachin Tripathi,G.P.Biswas and Sumitra Kisan,”Cryptographic Keys Generation Using Identity”, Proc. of Int. Conf. on Advances in Recent Technologies in Communication and Computing 2011.

Sharmila Subudhi, S. Panigrahi, â€œDetection of Automobile Insurance Fraud using Feature Selection and Data Mining Techniquesâ€, International Journal of Rough Sets and Data Analysis (IJRSDA), IGI Global, ISSN: 2334-4598, EISSN: 2334-4601, vol. 5, no. 3, pp. 1 â€“ 20, 2018 (UGC Care Listed).

Sharmila Subudhi, S. Panigrahi, and T. K. Behera, â€œDetection of Mobile Phone Fraud Detection System Using Possibilistic Fuzzy C-Means Clustering and Hidden Markov Modelâ€, International Journal of Synthetic Emotions (IJSE), IGI Global, vol. 7, no. 2, pp. 23-44, 2016, ISSN: 1947-9093, doi: 10.4018/IJSE.2016070102 (UGC Care Listed).

Sushree Bibhuprada B. Priyadarshini, S. Panigrahi, â€œA Distributed Scalar Controller Selection Scheme for Redundant Data Elimination in Sensor Networksâ€, International Journal of Knowledge Discovery in Bioinformatics (IJKDB), IGI Global, vol. 7, no. 1, pp. 91-104, 2017, ISSN: 1947-9115, EISSN: 1947-9123, doi: 10.4018/IJKDB (UGC Care Listed).

Brahma, Anitarani, S. Panigrahi, Neelamani Samal, and Debasis Gountia. "Rule-based database intrusion detection using coactive artificial neuro-fuzzy inference system and genetic algorithm." International Journal of Business Intelligence and Data Mining, Vol. 21, No. 1, pp. 85-101, 2022.

Sanjaya Kumar Panda, Munmun Saha, and S. Panigrahi. "A Survey on Applications of Multi-Attribute Decision Making Algorithms in Cloud Computing." SPAST Abstracts, vol. 1, no. 1, published Sep 24, 2021, URL: https://spast.org/techrep/article/view/1165 (UGC Care Listed, Scopus).

Sharmila Subudhi, S. Panigrahi, â€˜A Hybrid Mobile Call Fraud Detection Model using Optimized Fuzzy C-Means Clustering and Group Method of Data Handling-based Networkâ€™, Vietnam Journal of Computer Science, Springer, pp. 1-13, 2018, ISSN: 2196-8888 (print version), ISSN: 2196-8896 (electronic version), DOI: 10.1007/s40595-018-0116-x (UGC Care Listed).

Sushree Bibhuprada B. Priyadarshini, S. Panigrahi, â€œRedundant Data Minimization Using Hexagonal Scalar Premier Neighbourhood for Optimum Camera Actuation Schemeâ€, The Journal of Engineering (JoE), IET, pp. 1-11, 2016, Online ISSN 2051-3305, doi: 10.1049/joe.2016.0011 (UGC Care Listed, Emerging SCI (ESCI)).

Anitarani Brahma, S. Panigrahi, â€œA New Approach to Intrusion Detection in Databases by using Artificial Neuro Fuzzy Inference Systemâ€, International Journal of Reasoning-based Intelligent Systems, Inderscience Publishers, vol. 7, nos. 3/4, pp. 254-260, 2015, ISSN online: 1755-0564, ISSN print: 1755-0556, doi: 10.1504/IJRIS.2015.072952 (UGC Care Listed, Scopus).

Sharmila Subudhi, S. Panigrahi, â€œUse of Fuzzy Clustering and Support Vector Machine for Detecting Fraud in Mobile Telecommunication Networksâ€, International Journal of Security and Networks (IJSN), Inderscience Publishers, vol. 11, no. 1-2, pp. 3-11, 2016, ISSN online: 1747-8413, ISSN print: 1747-8405, doi: 10.1504/IJSN.2016.075069 (UGC Care Listed, Scopus).

Sharmila Subudhi, S. Panigrahi, â€œTwo-stage Automobile Insurance Fraud Detection by Using Optimized Fuzzy C-Means Clustering and Supervised Learningâ€, International Journal of Information Security and Privacy (IJISP), IGI Global, 2018, ISSN: 1930-1650,|EISSN: 1930-1669, DOI: 10.4018/IJISP (Accepted) (Scopus, Web of Science Emerging SCI (ESCI).

Anitarani Brahma, S. Panigrahi, â€œRole Based Profiling using Fuzzy Adaptive Resonance Theory for Securing Database Systemsâ€, International Journal of Applied Metaheuristic Computing (IJAMC), IGI Global, vol. 12, no. 2, pp. 36-48, 2021 (Scopus, Web of Science Emerging SCI (ESCI).

D. Kar, S. Panigrahi and S. Sundararajan, â€œSQLiDDS: SQL Injection Detection using Document Similarity Measureâ€, Journal of Computer Security, IOS Press, pp. 1-33, ISSN print 0926-227X, ISSN online 1875-8924, doi: 10.3233/JCS-160554, 2016 (Scopus, Web of Science: Emerging SCI (ESCI)).

Sushree Bibhuprada B. Priyadarshini, S. Panigrahi, â€œA Centralized cum Sub-Centralized Scheme for Multi-Event Coverage and Optimum Camera Activation in Wireless Multimedia Sensor Networksâ€, Special Issue on Creating a Smarter Environment through Advancement of Communication Systems, Networks and Applications, IET Networks, IET, vol. 4, no. 6, pp. 314â€“328, 2015, Online ISSN 2047-4962. Print ISSN 2047-4954, doi: 10.1049/iet-net.2015.0017 (Emerging SCI, Scopus, Source Normalized Impact per Paper (SNIP) = 0.987).

Sushree Bibhuprada B. Priyadarshini, S. Panigrahi, â€œA Novel Approach Using Optimum Camera Actuation in Event Boundary Detection Method for Redundant Data Minimizationâ€, Ain Shams Engineering Journal, Elsevier, 2016, ISSN: 2090-4479, doi:10.1016/j.asej.2016.04.013 (Scopus, SCI Expanded (SCI-E), IF=3.18).

Sushree Bibhuprada B. Priyadarshini, S. Panigrahi, â€œA Quadrigeminal Scheme based on Event Reporting Scalar Premier Selection for Camera Actuation in Wireless Multimedia Sensor Networksâ€, Journal of King Saud University: Engineering Sciences, Elsevier, 2017, ISSN: 1018-3639, doi: 10.1016/j.jksues.2017.04.002 (Article In Press) (UGC Care Listed, Scopus, IF = 4.806).

Sushree Bibhuprada B. Priyadarshini, S. Panigrahi, â€œCreating More Efficient Distributed Cameras: A Distributed Multievent Ensnaring Scheme Based on Scalar Leader Determinationâ€, IEEE Consumer Electronics Magazine, IEEE, vol. 7, no. 5, pp. 34 â€“ 39, 2018 (UGC Care Listed, Scopus, IF = 3.789).

D. Kar, S. Panigrahi, and S. Sundararajan, â€œSQLiGoT: Detecting SQL Injection Attacks using Graph of Tokens and SVM,â€ Computers & Security, Elsevier, vol. 60, pp. 206-225, 2016, ISSN: 0167-4048, doi:10.1016/j.cose.2016.04.005 (Scopus, SCI Expanded (SCI-E), IF = 4.438).

Sharmila Subudhi, S. Panigrahi, â€œUse of Optimized Fuzzy C-Means lustering and supervised classifiers for automobile insurance fraud detectionâ€, Journal of King Saud University - Computer and Information Sciences, Elsevier, 2017, ISSN: 1319-1578, doi: https://doi.org/10.1016/j.jksuci.2017.09.010 (Article In Press) (Scopus, SCI Expanded (SCI-E), IF = 13.473).

Sharmila Subudhi, S. Panigrahi, â€œApplication of OPTICS and Ensemble Learning for Database Intrusion Detectionâ€, Journal of King Saud University - Computer and Information Sciences, ISSN: 1319-1578, doi: https://doi.org/10.1016/j.jksuci.2017.09.010 (Article in Press) (Scopus, SCI Expanded (SCI-E), IF = 13.473).

A. Kundu, S. Panigrahi, S. Sural and A. K. Majumdar, â€œBLAST-SSAHA Hybridization for Credit Card Fraud Detectionâ€, IEEE Transactions on Dependable and Secure Computing (IEEE TDSC), vol. 6, no. 4, pp. 309-315, October-December 2009, ISSN: 1545-5971, doi: 10.1109/TDSC.2009.11 ((SCI Expanded (SCI-E), IF = 7.329)).

S. Panigrahi, S. Sural and A. K. Majumdar, â€œTwo-Stage Database Intrusion Detection by Combining Multiple Evidence and Belief Updateâ€, Information Systems Frontiers (Special Issue on Security Management and Technologies for Protecting Against Internal Data Leakages), Springer, vol. 15, no. 1, pp. 35-53, 2013, ISSN: 1387-3326 (Print) 1572-9419 (Online), doi: 10.1007/s10796-010-9252-2 ((Scopus, SCI Expanded (SCI-E), IF = 6.191)).

S. Panigrahi, A. Kundu, S. Sural and A. K. Majumdar, â€œCredit Card Fraud Detection: A Fusion Approach using Dempster-Shafer Theory and Bayesian Learningâ€, Information Fusion (Special Issue on Information Fusion in Computer Security), Elsevier, vol. 10, no. 4, pp. 354-363, 2009, ISSN: 1566-2535, doi:10.1016/j.inffus.2008.04.001 (Scopus, SCI Expanded (SCI-E), IF = 12.975).

Rath, D., Panda, S., Mishra, A. and Pal, K. â€œParticle swarm optimization and machinability aspects during turning of hardened D3 steel.â€ Journal of Advanced Manufacturing Systems,Vol. 19, No. 04, pp. 641-662, 2020 SCOPUS.

Pal, K., and Pal, S. K., â€œMulti-objective optimization of pulsed gas metal arc welding process using neuro NSGA-IIâ€ Journal of The Institution of Engineers (India): Series C, Vol 100, pp. 501â€“510 2019 SCOPUS.

Priyadarshini, M and Pal, K, â€œA comparative study for machining of Ti-6Al-4V alloy for multi-criteria responseâ€, Journal of Advanced Manufacturing Systems, Vol. 17(4), pp-515-531, 2018 SCOPUS.

Priyadarshini, M and Pal, K, â€œMulti-objective optimisation of EDM process using hybrid Taguchi-based methodologies for Ti-6Al-4V alloyâ€, International Journal of Manufacturing Research, Inderscience Publications, 2016, Vol. 11 (2), pp.144-166 SCOPUS.

Pal, K, and Pal, S K., â€œSensor based prediction of weld microstructure in pulsed MIG weldingâ€ International Journal of Microstructure and Materials Properties, Inderscience Publications, 2015 Vol 10(5-6), pp.402- 434, SCOPUS.

Pal, K, and Pal, S K., â€œSoft Computing Methods Used for the Modeling and Optimization of Gas Metal Arc Welding: A Reviewâ€, International Journal of Manufacturing Research, Inderscience Publications, 2011, Vol. 6(1), pp. 15 - 29,SCOPUS.

Sahu S K., Mishra D., and Pal K. â€œA comparative study between weldability of polycarbonate and nylon-6 using different pin geometries in friction stir weldingâ€, ProcIMechE Part B: Journal of Engineering Manufacture, Sage publications. (Accepted, In-Press), 2021 SCI/SCOPUS

Goswami N. and Pal K. â€œComparative assessment on weldability of Al 6061 to polycarbonate for dissimilar sheets placement in friction stir lap welding using sensor signalâ€, ProcIMechE Part C: J Mechanical Engineering Science, Sage publications. (Accepted, In-Press), 2021 SCI/SCOPUS.

Sahu S K., Mishra D., and Pal K. â€œOptimizing process parameters for joint strength efficiency improvement in friction stir welding of polycarbonate sheetsâ€, Material Science and Engineering Technology. Vol. 52, pp. 739â€“761, 2021 SCI/SCOPUS.

Barik T. and Pal K. â€œPrediction of drilled hole quality in bidirectional woven carbon fiber reinforced plastic using wavelet packets of forceâ€“torque signalsâ€, Journal of Reinforced Plastics and Composites,doi.org/10.1177/07316844211011757, 2021 SCI/SCOPUS.

Sahu S. K., Mishra D., and Pal K. â€œInvestigation on Mechanical Behavior of Friction Stir Welded Nylon-6 using Temperature Signaturesâ€ Journal of Materials Engineering and performance, Springer publications, Vol. 29, pp. 5238â€“5262, 2020SCI/SCOPUS.

Sahu S. K., Mishra D., Pal K. and Pal S. K. â€œMulti Sensor based strategies for accurate monitoring of friction stir welding of polycarbonate sheetsâ€ ProcIMechE Part C: J Mechanical Engineering Science, Sage publications.doi.org/10.1177/0954406220960772, 2020 SCI/SCOPUS.

Pattanaik Ajit K., Pal K, and Mishra Debadutta, â€œTribiological investigation and optimization of friction stir spot welding of dissimilar metals by LSSM-ANN methodâ€ Mechanics Based Design Of Structures And Machines, doi.org/10.1080/15397734.2020.1759429, 2020 SCI/SCOPUS.

Barik T., Pal K.,Parimita S, Sahoo P. and Patra K.â€œMonitoring of hole surface integrity in drilling of bi-directional woven CFRP compositesâ€, ProcIMechE Part C: J Mechanical Engineering Science, Sage publications, DOI: 10.1177/0954406220906292, 2020 SCI/SCOPUS.

Rath, D., Panda, S. and Pal, K. â€œDry turning of AISI D3 steel using a mixed ceramic insert: A study.â€ ProcIMechE Part C: J Mechanical Engineering Science. Vol. 233(19â€“20), pp. 6698â€“6712 2019 SCI/SCOPUS.

Sahu S K., Pal K, Mahto R. P., Dash P Monitoring of friction stir welding for dissimilar Al 6063 alloy to polypropylene using sensor signals. Int J Adv Manuf Technol. Springerpublication,vol. 104(1-4), pp. 159-177, 2019 SCI/SCOPUS.

Sahu, S K, Mishra, D, Mahto, R P, Sharma, Vyas M, Pal, K, Banerjee, S, Dash, P and Pal, S K., â€œFriction Stir Welding of Polypropylene Sheetâ€, Engineering Science and Technology, an International Journal, Vol 21 (2), pp. 245-254, 2018 SCOPUS.

Chatterjee, S, Chatterjee, R, Pal, S, Pal, K, and Pal S K., â€œAdaptive chirplet transform for sensitive and accurate monitoring of pulsed gas metal arc welding process", International Journal of Advanced Manufacturing Technology, Springer Verlag, 2012, Vol. 60(1-4), pp. 111- 125, SCI/SCOPUS.

Bhattacharya, S, Pal, K, and Pal, S K., â€œMulti-Sensor based prediction of metal deposition in pulsed gas metal arc welding using various soft computing modelsâ€, Applied Soft Computing, Elsevier Publications, 2012 , Vol. 12(1), pp. 498-505, SCI/SCOPUS.

Pal, K, and Pal, S K., â€œEffect of pulse parameters on weld quality in pulsed gas metal arc welding: a reviewâ€, Journal of Materials Engineering and Performance, Springer Verlag, 2011, Vol. 20(6), pp. 918-931, SCI/SCOPUS.

Pal, K, and Pal, S K., â€œMonitoring of weld penetration using arc acoustics in pulsed MIG weldingâ€, Materials and Manufacturing Processes, Taylor & Francis, 2011, Vol. 26, pp. 684-693, SCI/SCOPUS.

Pal, K, Bhattacharya, S, and Pal, S K., â€œOptimization of weld deposition efficiency in pulsed MIG welding using hybrid neuro based techniquesâ€, International Journal of Computer Integrated Manufacturing, Taylor & Francis, 2011, Vol. 24(3), pp. 198-210, SCI/SCOPUS.

Pal, K, and Pal, S. K., â€œStudy of weld joint strength using sensor signals for various torch angles in pulsed MIG weldingâ€, CIRP Journal of Manufacturing Science and Technology, Elsevier Publications, 2010,Vol. 3(1), pp. 55-65, SCI/SCOPUS.

Pal K., Bhattacharya S., and Pal S. K., â€œMultisensor-based monitoring of weld deposition and plate distortion for various torch angles in pulsed MIG weldingâ€, International Journal of Advanced Manufacturing Technology, Springer Verlag, 2010,Vol.50 (5-8), pp.543-556, SCI/SCOPUS.

Pal, K, Bhattacharya, S, and Pal, S K., â€œInvestigation on arc sound and metal transfer modes for on-line monitoring in pulsed gas metal arc weldingâ€, Journal of Materials Processing Technology, Elsevier Publications,2010 [Vol. 210(10), pp.1397-1410, SCI/SCOPUS.

Pal, K, Bhattacharya, S, and Pal, S. K., â€œPrediction of metal deposition from arc sound and weld temperature signatures in pulsed MIG weldingâ€. International Journal of Advanced Manufacturing Technology, Springer Verlag, 2009,Vol.45(11-12), pp.1113-1130, SCI/SCOPUS.

Swain PR, Dash P, Singh BN. Stochastic nonlinear bending analysis of piezoelectric laminated composite plates with uncertainty in material properties. Mechanics Based Design of Structures and Machines. 2021; 49 (2): 194-216

AdhikariB, DashP, SinghBN. Buckling analysis of porous FGM sandwich plates under various types nonuniform edge compression based on higher order shear deformation theory. Composite Structures 2020; 251: 112597

Adhikari, B, Dash P. Geometrically nonlinear free vibration analysis of laminated composite plates: A finite element assessment of a higher order non-polynomial shear deformation theory. Mechanics of Advanced Materials and Structures. 2019; 1-12

Sahu SK, Pal K, Mahto RP, Dash P. Monitoring of friction stir welding for dissimilar Al 6063 alloy to polypropylene using sensor signals. The International Journal of Advanced Manufacturing Technology. 2019;104 (1-4): 159-177

Swain PR, Adhikari B, Dash P. A higher-order polynomial shear deformation theory for geometrically nonlinear free vibration response of laminated composite plate. Mechanics of Advanced Materials and Structures. 2019; 26 (2): 129-138

Sahu SK, Mishra D, Mahto RP, Sharma VM, Pal SK, Pal K, Banerjee S, Dash P. Friction stir welding of polypropylene sheet, Engineering Science and Technology, an International Journal.2018; 21 (2): 245-254

Dash P, Singh BN. Static response of geometrically nonlinear laminated composite plates having uncertain material properties. Mechanics of Advanced Materials and Structures. 2015; 22 (4): 269-280

Dash P, Singh BN. Buckling and post-buckling response of laminated composite plate with random system properties. Mechanics of Advanced Materials and Structures. 2014; 21 (6): 516-529

Dash P, Singh BN. Geometrically nonlinear free vibration of laminated composite plate embedded with piezoelectric layers having uncertain material properties. Journal of Vibration and Acoustics. 2012; 134 (6): 1-13

Dash P, Singh BN. Buckling and post-buckling of laminated composite plates. Mechanics Research Communications. 2012; 46: 1-7

Dash P, Singh BN. Geometrically nonlinear bending analysis of laminated composite plate.Communications in Nonlinear Science and Numerical Simulation. 2010; 15 (10): 3170-3181

Dash P, Singh BN. Nonlinear free vibration of piezoelectric laminated composite plate. Finite Elements in Analysis and Design. 2009; 45 (10): 686-694

Singh BN, Vyas N, Dash P. Stochastic free vibration analysis of smart random composite plates.Structural Engineering and Mechanics. 2009; 31 (5): 481-506

Dash P, Singh BN. Second-order statistics of large-amplitude free vibration of a random composite plate. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. 2009; 223 (8): 1099-1113

Sahu, S. R., Bhoi, B. K., & Pradhan, M. (2020). Fast signed multiplier using Vedic Nikhilam algorithm. IET Circuits, Devices & Systems, 14(8), 1160-1166.

Bhoi, B. K., Misra, N. K., & Pradhan, M. (2020). Synthesis and simulation study of non-restoring cell architecture layout in perpendicular nano-magnetic logic. Journal of Computational Electronics, 19(1), 407-418.

Gadtia, S., Padhan, S. K., & Bhoi, B. K. (2020). Square root formulae in the ÅšulbasÅ©tras and BakhshÃ£lÄ© manuscript. Journal of Interdisciplinary Mathematics, 23(1), 1-10.

Pathak, N., Kumar, S., Misra, N. K., & Bhoi, B. K. (2019). A modular approach for testable conservative reversible multiplexer circuit for nano-electronic confine application. International Nano Letters, 9(4), 299-309.

Bhoi, B. K., Misra, N. K., & Pradhan, M. (2019). Analysis on Fault Mapping of Reversible Gates with Extended Hardware Description Language for Quantum Dot Cellular Automata Approach. Sensor Letters, 17(5), 371-378.

Barik, R. K., Bhoi, B. K., & Pradhan, M. (2018). An efficient redundant binary adder with revised computational rules. Computers & Electrical Engineering, 72, 224-236.

Bhoi, B. K., Misra, N. K., & Pradhan, M. (2018). Design of magnetic dipole based 3D integration nano-circuits for future electronics application. International Journal of Nano Dimension, 9(4), 374-385.

Bhoi, B. K., Misra, N. K., & Pradhan, M. (2018). A novel vedic divider based crypto-hardware for nanocomputing paradigm: An extended perspective. International Journal of Nano Dimension, 9(4), 336-345.

Bhoi, B., Misra, N. K., & Pradhan, M. (2017). Design and evaluation of an efficient parity-preserving reversible QCA gate with online testability. Cogent Engineering, 4(1), 1416888.

Misra, N. K., Sen, B., Wairya, S., & Bhoi, B. (2017). Testable novel parity-preserving reversible gate and low-cost quantum decoder design in 1D molecular-QCA. Journal of Circuits, Systems and Computers, 26(09), 1750145.

Bhoi, B. K., Misra, N. K., & Pradhan, M. (2017). A universal reversible gate architecture for designing n-bit comparator structure in quantum-dot cellular automata. International Journal of Grid and Distributed Computing, 10(9), 33-46.

Padhan, S. K., Gadtia, S., & Bhoi, B. (2016). FPGA based implementation for extracting the roots of real number. Alexandria Engineering Journal, 55(3), 2849-2854.

A High Speed Divider Architecture Using Paravartya Sutra of Vedic Mathematics.( International Journal of Applied Engineering Research,volume 10,2015)

S. N. Mishra, D. Konhar, D. Mishra, R. K. Mishra â€œOn the possibility of linear polarization in elliptical microstrip patch antennaâ€,Microwave and Optical Technology Letters,Wiley, 2019, 61(4), pp.1048-1051.

A. K. Behera, D. Konhar, D. Mishra, S. N. Mishra â€œA Fibonacci series-inspired-elliptically-slotted CPW fed UWB patch antenna with Ku band-reject characteristicsâ€,Microwave and Optical Technology Letters,Wiley, 2021, 63(11), pp.2840-2845.

D. Konhar,A. K. Behera,S. N. Mishra,D. Mishra, â€œA High Gain Elliptical Slot Antenna for Lower C-band and X-band Applicationâ€,Journal of King Saud University â€“ Engineering Sciences,Elsivere, 2022, 34(2), pp.108-115.

S,Sahu,B.Bhoi,M.Pradhan. Improved Redundant Binary Adder Realization in FPGA,Journal of Circuits, Systems and Computers,World Scientific Publishing Company,pp.2150287,June 2021.

S,Sahu,B.Bhoi,M.Pradhan. Fast Signed multiplier using Vedic Nikhilam architecture,IET Circuits, Devices & Systems,14(8),pp1160-1166,Dec 2020.

B.Bhoi,N.Mishra,M.Pradhan.Synthesis and simulation study of non restoring cell architecture layout in perpendicular nano magnetic logic,Journal of Computational Electronics,19(1),pp.407-418,Mar 2020.

B.Bhoi,N.Mishra,L.Jamal,M.Pradhan.Low-cost synthesis approach for reversible authenticator circuits in QCA environment,International Journal of Nanoelectronics and Materials,pp.205-220,2019.

B.Bhoi,N.Mishra,M.Pradhan.Analysis on Fault Mapping of Reversible Gates with Extended Hardware Description Language for Quantum Dot Cellular Apporach,Sensor Letters,17,pp.371-378,2019.

B.Bhoi,N.Mishra,M.Pradhan.Design of magnetic dipole based 3D integration nano-circuits for future electronics application,International Journal of Nano Dimension,9,pp.374-385,2018.

B.Bhoi,N.Mishra,M.Pradhan.A novel vedic divider based crypto hardware for nano computing paradigm,International Journal of Nano Dimension,9,pp.336-345,2018.

R.Barik,B.Bhoi,M.Pradhan.An efficient redundant binary adder with revised computational rules,ElsevierComputers & Electrical Engineering,72,pp.224-236,2018.

B.Bhoi,N.Mishra,M.Pradhan.A Universal Reversible Gate Architecture for Designing N-Bit Comparator Structure in Quantum-dot Cellular Automata,International Journal of Grid Distrbuted Computing,10,pp.33-46,2017.

B.Bhoi,N.Mishra,M.Pradhan.Design and evaluation of an efficient parity-preserving reversible QCA gate with online testability,Taylor & Francis Cogent engineering,4(1),pp.1-18,2017.

R. Barik ,M.Pradhan,R.Panda.Efficient Conversion technique from Redundant Binary to Non redundant Binary representation,Journal of Circuits Systems and Computers, World Scientific Journal,16,pp.1-18,2017, Singapore.

R. Barik ,M.Pradhan,R.Panda.Time Efficient Signed Vedic Multiplier using Redundant Binary Representation,IET The Journal of Engineering,3,pp.60-68,2017, UK.

R.Barik M.Pradhan.ASIC and FPGA Implementation of Cube Architecture,IET Computer & Digital Techniques,11(1),pp.43-49,2016, UK.

R.Barik, M.Pradhan,Area-Time Efficient Square Architecture. Advances in Modeling, AMSE Journal, Series D, Computer Science and Statistics, 20(1),pp.21-34,2015, France. [SCImago journal and country rank value-0.12, H index: 6 ](Accepted)

B.Bhoi,M.Pradhan, A high speed Divider Architecture using Paravartya Sutra of Vedic Mathematics,International Journal of Applied Engineering and Research,10,pp.13365-13375,2015,India. [SCImago journal and country rank value-0.13, H index: 5 ]

M.Pradhan,R.Panda, High speed multiplier using Nikhilam Sutra algorithm of Vedic mathematics,Tayler & Francis,International Journal of Electronics, 101(3),pp. 300-307,2014,UK.[Impact factor: 0.56], [SCImago journal and country rank, subject category: Q2, H index: 38 ]

M.Pradhan,R.Panda,Speed Optimization of Vedic Multiplier, Advances in Modeling,AMSE Journal, Series A, General Mathematics,pp.49,21,2012,France.[SCImago journal and country rank value-0.12, H index: 6 ]

M.Pradhan,R. Panda,Design and Implementation of 16-bit processor.Advances in Modeling,AMSE Journal, Series D, Computer Science and Statistics,17(1),pp.1-14,2012, France.[SCImago journal and country rank value-0.12, H index: 6 ].

M.Pradhan,R. Panda,Design and Implementation of Vedic multiplier. Advances in Modeling,AMSE Journal, Series D, Computer Science and Statistics,15(1),pp.1-19,2010, France.[SCImago journal and country rank value-0.12, H index: 6 ].

M.Pradhan,R.Panda, FPGA Based design and implementation of ALU. Advances in Modeling,AMSE Journal, Series D, Computer Science and Statistics,15(1),pp.20-29,2010, France.[SCImago journal and country rank value-0.12, H index: 6 ]

S.Mishra, M.Pradhan, Implementation of karatsuba algorithm using polynomial multiplication. Indian Journal of Computer Science and Engineering (IJCSE), 3(1), pp.88-93,2012,India.

R.Sahu, H.Pradhan, B. B.Mangaraj, and S. K.Behera, â€œGain and Bandwidth Enhancement of X-band Compact Dielectric Resonator Antenna with Defected Ground Structureâ€ IETE Journal of Research (Taylor & Francis), pp. 1-10, 2022,(ISSN: 0377-2063,DOI: 10.1080/03772063.2021.2021823).

H. Pradhan, B. B. Mangaraj, and S. K. Behera, â€œChebyshev-based array for beam steering and null positioning using modified ant lion optimization,â€ International Journal of Microwave and Wireless Technologies, Vol. 14, No. 2, pp. 143-157, 2022, (ISSN: 1759-0787,DOI: 10.1017/S1759078721000295).

A. B.Sahoo, G. P. Mishra, and B. B.Mangaraj â€œDesign and Performance Study of Single and Multi-Layered Fractal Based Miniaturized Patch Antennas for 2.4 GHz Applicationsâ€ Journal of Microwaves, Optoelectronics and Electromagnetic Applications, Vol. 20, No. 2, pp. 274-296. 18 June 2021, (ISSN: 2179-1074,DOI: 10.1590/2179-10742021v20i21165).

H. Pradhan, B. B. Mangaraj, and S. K. Behera, â€œImproved Salp swarm optimization based circular arrays in presence of mutual couplingâ€ International Journal of RF Microwave Computer Aided Engineering, Vol. 31 Page: e22719, 2021, (ISSN: 1099-047X,DOI:10.1002/mmce.22719).

R.Pathak, B. B.Mangaraj, Arun Kumar, and Sushil Kumar, "Dual Feed Multiband Microstrip Patch Antenna Design with Circular Polarized Wave for 5G Cellular Communication," Progress In Electromagnetics Research B, Vol. 93, pp. 87-109, 2021, (ISSN:1937-6472, DOI:10.2528/PIERB21052602).

M. R. Jena, S.Sahoo, G. P. Mishra,& B. B.Mangaraj, â€œMiniaturised band notched printed LPDA design with meander fractal dipole for UWB communicationâ€, International Journal of Electronics (Taylor & Francis), 2021, Vol. 108, Issue 1, pp. 21 - 44, (ISSN: 0920-5071,DOI: 10.1080/00207217.2020.1756452).

Rajiv Pathak, G. P. Mishra, B. B. Mangaraj, and Ashutosh Narayan, â€œAn Improved Compact Antenna Design Proposed for 5G Cellular Bandâ€, International Journal of Sensors, Wireless Communication and Control, Vol. 10, No. 6, pp. 886-899, 2020,(ISSN: 2210-3279, DOI:10.2174/2210327909666190710122946)

A. B. Sahoo and B. B. Mangaraj, â€œA miniaturized electromagnetically coupled patch antenna design using eroded ground planeâ€, Microwave and Optical Technology Letters, 2020, Vol. 62, Issue-11, pp. 3589â€“ 3600, (ISSN: 1098-2760,DOI: 10.1002/mop.32480).

G. P. Mishra and B. B. Mangaraj, " Highly compact microstrip patch design based on improved capacitive Minkowski fractal defected ground structure" AEU-International Journal of Electronics and Communications (Urban & Fischer), Vol. 115, Page 153049, 1 February 2020, (ISSN: 1434-8411,DOI: 10.1016/j.aeue.2019.153049).

S. Hota, S. Baudha, B. B. Mangaraj, M. V. Yadav, â€œA novel compact planar antenna for ultra-wideband applicationâ€, Journal of Electromagnetic Waves and Applications (Taylor & Francis), Vol. 34, Issue 1, pp. 116 â€“ 128, 2nd Jan 2020,(ISSN: 0920-5071,DOI:10.1080/09205071.2019.1689854).

I. S. Misra, R. S. Chakrabarty, B. B. Mangaraj, “Design, Analysis and Optimization of V-Dipole and its Three-Element Yagi-Uda Array” Progress in Electromagnetic Research, PIER 66, Page 137-156, 2006, USA. (DOI:10.2528/PIER06102604)

B. B. Mangaraj, I. S. Misra, and A. Barisal, “Optimizing Included Angle of Symmetrical V Dipoles for Higher Directivity Using Bacteria Foraging Optimization Algorithm ” Progress In Electromagnetics Research B, Vol. 3, Page 295-314, 2008, USA. (DOI:10.2528/PIERB07121005)

T. Datta, I. S Misra, B. B. Mangaraj, and S Imtiaj, “Improved Adaptive Bacteria Foraging Algorithm in Optimization of Antenna Array for Faster Convergence” Progress In Electromagnetic Research PIER C, Vol. 1, Page 143-157, 2008, USA. (DOI:10.2528/PIERC08011705)

B. B. Mangaraj, I. S. Misra, and S. K. Sanyal, “Application of Bacteria Foraging Algorithm for the Design Optimization of Multi-Objective Yagi-Uda Array” International Journal of RF and Microwave computer- Aided Engineering, Vol. 21, Issue 1, pp. 25- 35, January 2011. (DOI 10.1002/mmce.20483)

B. B. Mangaraj, I. S. Misra, and S. K. Sanyal, “Application of Bacteria Foraging Algorithm in Designing Log-Periodic Dipole Array for entire UHF TV Spectrum” International Journal of RF and Microwave computer- Aided Engineering, Vol. 23, Issue 2, pp. 157- 171, March 2013. (DOI 10.1002/mmce.20661)

K. L. Kar, C. P. Giri, and B. B. Mangaraj, “VHDL Modeling of Fuzzy Control System” International Journal of Advanced and innovative research, Vol. 2, Issue 3, p 607-612, March 2013.

K. L. Kar, C. P. G. B. C. Kar, V. Dohare, and B. B. Mangaraj, “Optimization of the Performance of ANN Using VHDL” International Journal of Scientific and Engineering research, Vol. 4, Issue 7, p 573-577, July 2013

M. R. Jena, B. B. Mangaraj, and D. Mishra, “Bandwidth and Gain Enhancement of Multi-Band Fractal Antenna Based on the Sierpinski Carpet Geometry” International Journal on Communication Technology, Vol. 4, Issue 1, pp. 669-674, March 2013.

K. L. Kar, R. Pathak, B.B. Mangaraj, and S. K. Sanyal, “VHDL Design of Smart Antenna Using ANN” International Transaction on Electrical, Electronics, and Comm. Engg. Vol. 3, No.- 1, p 103(7), March 2013.

B. B. Mangaraj, S. Hota, and S. K. Mohanty, “Comparative Study of Two Optimizing Techniques: Bacteria Forging Algorithm and Genetic Algorithm in Solving V-dipole Antenna Problem” International Journal of Research in Adv. Technology in Engineering Vol. 1, Issue 2, p 6-15, September 2013.

M. R. Jena, B. B. Mangaraj, and R. Pathak, “A Novel Sierpinski Carpet Fractal Antenna with Improved Performances” American Journal of Electrical and Electronic Engineering, Vol. 2, Issue 3, pp. 62-66, January 2014. (DOI:10.12691/ajeee-2-3-1)

Rajiv Pathak, ManasRanjan Jena, and B. B. Mangaraj, “Performance Analysis of Patch Array as a Smart Antenna” International Journal of Computer Science and Network, p.34-37, May 2014.

M. R. Jena, B. B. Mangaraj, and R. Pathak, “An Improved Compact & Multiband Fractal Antenna Using the Koch Curve Geometry” Science and Education, Wireless and Mobile Technologies, 2014, Vol. 2, No. 1, p.1-6, June 2014. (DOI: 10.12691/wmt-2-1-1)

M. R. Jena, B. B. Mangaraj, and R. Pathak, “Design of aÂ NovelSierpinski Carpet Fractal Antenna Arrays on Circular Shapes with Low Side Lobes for 3G Applications” American Journal of Electrical and Electronic Engineering, Vol. 2, Issue 4, p.137-140, JanuaryÂ 2014. (DOI:10.12691/ajeee-2-4-3)

B. B. Mangaraj, M. R. Jena, and S. K. Mohanty, “Bacteria Foraging Algorithm in Antenna Design” Applied Computational Intelligence and Soft Computing, Hindawi Publishing Corporation, Vol. 2016, Issue 1, page 1-11, February 2016. (DOI:10.1155/2016/5983469)

Amiya B. Sahoo, Guru P. Mishra, Manas R. Jena, and B. B. Mangaraj, “Optimal Design and Comparative Study of Circular Patch Antennas Using Different Feeds for WLAN and WiMAX Applications” International Journal on Communications Antenna and Propagation, Vol. 6, No. 3, pp. 188-196, June 2016. (DOI: 10.15866/irecap.v6i3.9678).

B. B. Mangaraj, S. K. Mohanty, and S. Hota,Â “Performance evaluation of two popular antennas designed using a Bacteria Foraging Algorithm” Engineering Science and Technology, an International Journal, 19 (2016), Pages 1788-1800. (DOI: 10.1016/j.jestch.2016.08.022)

Hrudananda Pradhan, Biswa Binayak Mangaraj, and ItiSahaMisra. "Optimal dipole planar antenna array design for different UHF band applications using cuckoo search algorithm." International Journal of Swarm Intelligence, Vol. 2, No. 2/3/4, pp. 171-187, 2016. (DOI: 10.1504/IJSI.2016.081146)

B. B. Mangaraj, and PrativaSwain,Â “An optimal LAA subsystem designed using Gravitational Search
Algorithm” Engineering Science and Technology, an International Journal, 20 (2017), Pages 494-501. (DOI: 10.1016/j.jestch.2017.01.002).

S. K. Mohanty, A. B. Sahoo, and B. B. Mangaraj, “Comparative Study of PSO and CS for Optimization of 3Ã—5 Planar Antenna Array using MOM”, International Journal of Information and Communication Technology, Vol. 11, No. 1, pp. 128-149, 2017. (DOI: 10.1504/IJICT.2017.085479)

S. K. Mohanty and B. B. Mangaraj, “God’s Sunflower Circular Array: an Improved Circular Array with better Maximum Sidelobe Level and First Null Beam Width Performance”, International Journal of Sensors, Wireless Communication and Control, Vol. 7, No. 2, pp. 138-151, 2017. (DOI:10.2174/2210327907666170621093801)

Guru Prasad Mishra, Madhu Sudan Maharana, SumonModak, and B. B. Mangaraj. "Study of Sierpinski Fractal Antenna and Its Array with Different Patch Geometries for Short Wave Ka Band Wireless Applications." Procedia Computer Science, Vol. 115, pp. 123-134, 2017. (DOI: 10.1016/ j.procs.2017.09.085)

S. K. Mohanty, P. Swain, and B. B. Mangaraj, "Fuzzy logic biased optimal dipole-linear antenna array: An improved array with better trade-off between performance parameters," Progress in Electromagnetics Research B, Vol. 79, pp. 167-190, 2017. DOI: 10.2528/PIERB17070402

S. K. Mohanty and B. B. Mangaraj, “An Optimal Design of Super-Directive Dipole Linear Antenna Array Using Gravitational Search Algorithm and Large Perfect Reflecting Surface”, Recent Advances in Electrical & Electronic Engineering, Vol. 11, No. 2, pp. 227-238, 2018. (DOI:10.2174/2352096511666180124152013)

A. B. Sahoo, Guru Prasad Mishra, and B. B. Mangaraj, “A Novel Dual Slot Circular Patch Antenna Design for Multi-band Applications”, Microwave Review, Vol. 24, No. 2, pp. 9-18, December 2018.

S. Hota, S. Baudha, B. B. Mangaraj, M. V. Yadav, “A compact, ultrawide band planar antenna with modified circular patch and a defective ground plane for multiple applications”, Microwave Optical Technology Letter,Â 2019, Vol.Â 61, Issue- springer 9, pp. 2088â€“ 2097. https://doi.org/10.1002/mop.31867

G. P. Mishra, A. B. Sahoo, SmeetaHota, B. B. Mangaraj, "Direct and electromagnetically coupled compact microstrip antenna design with modified fractal DGS" International Journal of RF and Microwave Computerâ€Aided Engineering, Vol. 29, Issue 10, e21887, pages. 1-10, June 2019, ISSN: 1099-047X, DOI: org/10.1002/mmce.21887

G. P. Mishra and B. B. Mangaraj, " Miniaturisedmicrostrip patch design based on highly capacitive defected ground structure with fractal boundary for X-band microwave communications" IET Microwaves, Antennas & Propagation, Vol. 13, Issue 10, Pages 1593-1601, August 2019,Â ISSN: 1751-8725. DOI: 10.1049/iet-map.2018.5778

M. R. Jena, G. P. Mishra, A. B. Sahoo, and B. B. Mangaraj, “Fractal Geometry and Its Application to Antenna Designs” International Journal of Engineering and Advanced Technology (IJEAT), Volume-9 Issue-1, pp. 3726-3743, October 2019, DOI: 10.35940/ijeat.A9793.109119, ISSN: 2249 â€“ 8958.

A. B. Sahoo, G. P. Mishra, and B. B. Mangaraj, “Optimal Design of Compact Dual-band Slot Antenna Using Particle Swarm Optimization for WLAN and WiMAX Applications”, Recent Advances in Electrical & Electronic Engineering, Vol. 12, No. 5, pp. 425-431, 2019. ISSN: 2352-0965 (DOI:10.2174/2352096511666180706130127)

Naik S, Das SR, Dhupal D & Khatua AK; (2021) Analysis on surface integrity and sustainability assessment in electrical discharge machining of engineered Al-22%SiC metal matrix composite. Revista de Metalurgia. 57 (4) e210. https://doi.org/10.3989/revmetalm.210

Panda SK, Rout S, Panigrahi D & Dhupal D; (2021) Investigation on Surface Morphology and Dimensional Characteristics of Micro-channels Fabricated on Titanium-V Alloy by DPSS Nd:YAG Laser. Lasers Manuf. Mater. Process. 8, 443â€“465. https://doi.org/10.1007/s40516-021-00156-0

Pradhan S, Sahu S, Das S R & Dhupal D; (2022) â€œExperimental study and simulation of surface generation during machining of K-80 alumina ceramic in modified abrasive jet machining with different temperatures using Al2O3 abrasivesâ€ International Journal of Abrasive Technology. Vol. 10, No. 4, pp. 298-329. https://doi.org/10.1504/IJAT.2021.120291.

Rout B, Dash R, Dhupal D & Das SR; (2022) â€œOptimized posture prediction for task specific during stacking process using human upper body movementsâ€. Int J Interact Des Manuf 16, 291â€“303. https://doi.org/10.1007/s12008-022-00841-0

Pradhan S & Dhupal D; (2022) "Experimental and simulation approach of surface generation on K-80 alumina ceramic by recently developed sustainable FB-HAJM using novel nozzle designâ€. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering; 236(6):2502-2514. doi:10.1177/09544089221093988

Naik S, Das S R, Dhupal D & Khatua A K; (2022) â€œElectrical Discharge Machining of Engineered Al-22% SiC Metal Matrix Composite: Surface Roughness Analysis, Optimization, Economic Analysis, and Sustainability Assessmentâ€. Process Integr Optim Sustain 6, 223â€“251. https://doi.org/10.1007/s41660-021-00207-1

Pradhan S & Dhupal D;(2022) â€œAn Integrated Approach of Simulation, Modeling and Computer-aided Design of Hot Abrasive Jet Machining Setupâ€. Journal of Advanced Manufacturing Systems; Vol. 21, No. 03, pp. 427-472.

Pradhan S, Sahu S, Das SR & Dhupal D ;(2021)â€œExperimental study and simulation of surface generation during machining of K-80 alumina ceramic in modified abrasive jet machining with different temperatures using Al2O3 abrasives â€International Journal of Abrasive Technology. (Accepted).

Parida SP, Jena PC, Das SR, Dhupal D & Dash RR;(2021)â€œComparative stress analysis of different suitable biomaterials for artificial hip joint and femur bone using finite element simulation â€Advances in Materials and Processing Technologies.1-16,https://doi.org/10.1080/2374068X.2021.1949541.

Pradhan S, Das SR, Jena PC & Dhupal D ;(2021)â€œInvestigations on Surface Integrity in Hard Turning of Functionally Graded Specimen under Nano Fluid Assisted Minimum Quantity Lubricationâ€ Advances in Materials and Processing Technologies.1-16,https://doi.org/10.1080/2374068X.2021.1948706.

Banerjee B, Pradhan S, Das S & Chakraborty A; (2021)â€œHorn design and analysis in ultrasonic machining process using ANSYS â€Advances in Materials and Processing Technologies. 1-14,https://doi.org/10.1080/2374068X.2021.1945266.

Pradhan S, Dash PB, Kumari K & Dhupal D ; (2021)â€œStudy of micro machining characteristics by Nd-YAG Laser on NiTinol shape memory alloyâ€ Advances in Materials and Processing Technologies.1-15,https://doi.org/10.1080/2374068X.2021.1946757.

Pradhan S, Tripathy SS & Dhupal D ; (2021)â€œMachining of aluminium nitride ceramic using developed hot abrasive jet machining: an experimental and simulation approach â€Advances in Materials and Processing Technologies.1-15,https://doi.org/10.1080/2374068X.2021.1945275.

Rout S, Panigrahi D, Patel SK & Dhupal D ;(2021) â€œMicrochanneling on bio-inert dental ceramic using dry pulsed laser ablation and liquid supported pulsed laser ablation approachâ€ Optics and Lasers in Engineering 144, 106654 https://doi.org/10.1016/j.optlaseng.2021.106654.

Dixit S, Panigrahi D, Rout S, Panda S & Dhupal D ; (2021)â€œA Tribological Parametric Analysis of Laser Textured Microgrooves on Si3N4â€ Lasers in Engineering (Old City Publishing).

Naik S, Das SR & Dhupal D ;(2021)â€œExperimental Investigation, Predictive Modeling, Parametric Optimization and Cost Analysis in Electrical Discharge Machining of Al-SiC Metal Matrix Compositeâ€Silicon.13, 1017-1040.

Pradhan S, Das SR, Jena PC & Dhupal D ;(2021)â€œMachining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approachâ€ Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 09544062211010199.

Panigrahi D, Rout S, Patel SK & Dhupal D (2021)Stray current and its consequences on microstructure of Hastelloy C-276 during parametric investigation on geometrical features: fabricated by electrochemical micromachining. The International Journal of Advanced Manufacturing Technology.112 (1), 133-156.

Pradhan S, Das SR, Nanda BK, Jena PC & Dhupal D (2021)Machining of Hardstone Quartz with Modified Ajm Process Using Hot SiC Abrasives: Analysis, Modeling, Optimization, and Cost Analysis. Surface Review and Letters (SRL) 28 (02), 1-21.

Pradhan S, Das SR, Nanda BK, Jena PC & Dhupal D (2020)Experimental investigation on machining of hardstone quartz with modified AJM using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering42, 559. https://doi.org/10.1007/s40430-020-02644-4.

Pradhan S, Das SR & Dhupal D (2020) Performance evaluation of recently developed new process HAJM during machining hardstone quartz using hot silicon carbide abrasives: an experimental investigation and sustainability assessment. Silicon,1-25.

Pattanayak S, Panda S & Dhupal D (2020)Laser micro drilling of 316L stainless steel orthopedic implant: A study. Journal of Manufacturing Processes 52, 220-234.

Naik S, Das SR & Dhupal D (2020)Analysis, predictive modelling and multi-response optimization in electrical discharge machining of Al-22% SiC metal matrix composite for minimization of surface roughness and hole overcut. Manufacturing Review 7, 1-20.

Panda A, Das SR & Dhupal D (2020)Machinability investigation and sustainability assessment in FDHT with coated ceramic tool. Steel and Composite Structures 34 (5), 681-698.

Rout B, Dash RR & DhupalD (2020)Posture prediction and optimization for a manual assembly operation involving lifting of weights. International Journal for Simulation and Multidisciplinary Design Optimization 11.

Rout B, Tripathy PP, Dash RR & Dhupal D ;(2020)â€œOptimization of posture prediction using MOO in brick stacking operation. Computational Intelligence in Data Mining, 461-472.

Panda A, Das SR & Dhupal D ;(2019)â€œMachinability investigation of HSLA steel in hard turning with coated ceramic tool: assessment, modeling, optimization and economic aspectsâ€Journal of Advanced Manufacturing Systems 18 (04), 625-655.

Dixit SR, Das SR & Dhupal D (2019)â€œParametric optimization of Nd: YAG laser microgrooving on aluminum oxide using integrated RSM-ANN-GA approachâ€Journal of Industrial Engineering International 15 (2), 333-349.

Rout B, Dash RR & Dhupal D ;(2019)â€œOptimal posture prediction in brick stacking operation for reducing ergonomic risk factorâ€ Int. J. Recent Technol. Eng., 1835-1841.

Panda A, Das SR & Dhupal D ;(2019)â€œStatistical Analysis of Surface Roughness Using RSM in Hard Turning of AISI 4340 Steel with Ceramic Toolâ€Advances in Industrial and Production Engineering, 17-26.

Jena PC, Pradhan B & Dhupal D ; (2019)â€œModeling and Numerical Analysis of Advanced Machining for Orthotic Componentsâ€Design, Development, and Optimization of Bio-Mechatronic Engineering Products, 230-271.

Jena PC, Pradhan B & Dhupal D ; (2019)â€œExperimental Investigation on ECMM with Nimonic 75 Alloy for Prosthetic Componentâ€ Design, Development, and Optimization of Bio-Mechatronic Engineering Products 126-157.

Sahu SK, Naik S, Das SR & Dhupal D ;(2019)â€œParametric optimization of surface roughness and overcut in electric discharge machining of Al-SiC using copper electrodeâ€Renewable Energy and its Innovative Technologies, 99-116.

Panda A, Das SR & Dhupal D ;(2018)â€œHard Turning of HSLA Steel with Coated Ceramic InsertsAn Assessment, Modelling, Optimisation and Cost Analysisâ€International Journal of Automotive & Mechanical Engineering 15 (4).

Panda A, Das SR, Dhupal D & Davim JP;(2018)â€œHard turning of HSLA steel with coated ceramic tool based on evaluation of surface roughness, tool wear, chip morphology and economic analysisâ€Journal of Manufacturing Technology Research 10 (3/4), 113-141.

Panda A, Das SR & Dhupal D ;(2018)â€œExperimental investigation, modelling and optimization in hard turning of high strength low alloy steel (AISI 4340)â€MatÃ©riaux & Techniques 106 (4), 404.

Panda A, Das SR & Dhupal D ; (2017)â€œSurface roughness analysis for economical feasibility study of coated ceramic tool in hard turning operationâ€ Process Integration and Optimization for Sustainability 1 (4), 237-249.

Das SR, Panda A & Dhupal D ;(2017)â€œExperimental investigation of surface roughness, flank wear, chip morphology and cost estimation during machining of hardened AISI 4340 steel with coated carbide insertâ€ Mechanics of Advanced Materials and Modern Processes 3 (1), 1-14.

Nanda BK, Mishra A & Dhupal D ; (2017)â€œFluidized bed abrasive jet machining (FB-AJM) of K-99 alumina ceramic using SiC abrasivesâ€The International Journal of Advanced Manufacturing Technology 90 (9), 3655-3672.

Nanda BK & Dhupal D ; (2017) â€œEffect of Machining Parameters in Drilling of Glass Fiber Reinforced Polymer Composite with Modified AJM Processâ€ International Journal of Manufacturing Technology and Management. (In presss)

Das SR, Kumar A & Dhupal D ;(2016)â€œExperimental investigation on cutting force and surface roughness in machining of hardened AISI 52100 steel using cBN toolâ€International Journal of Machining and Machinability of Materials 18 (5-6)501-521.

Das SR, Dhupal D & Kumar A;(2015)â€œStudy of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic insertsâ€Journal of Mechanical Science and Technology 29 (10), 4329-4340.

Das SR, Dhupal D & Kumar A;(2015)â€œExperimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic toolâ€Measurement 62, 108-126.

Das SR, Kumar A & Dhupal D ;(2015)â€œSurface roughness analysis of hardened steel using TiN coated ceramic insertsâ€International Journal of Machining and Machinability of Materials 17 (1), 22-38.

Das SR, Kumar A, Dhupal D & Rath KC;(2013)â€œEstimating the effect of machining parameters on surface roughness during machining of hardened EN24 steel using coated carbide insertsâ€ International Journal of Mechanical and Industrial Engineering (IJMIE) 3 (2).

Doloi B, Dhupal D & Bhattacharyya B; (2010)â€œModelling and analysis on machining characteristics during pulsed Nd: YAG laser microgrooving of aluminium titanate (Al2TiO5)â€ International journal of manufacturing technology and management 21 (1-2), 30-41.

Dhupal D , Doloi B & Bhattacharyya B; (2009)â€œModeling and optimization on Nd: YAG laser turned micro-grooving of cylindrical ceramic materialâ€ Optics and Lasers in Engineering 47 (9), 917-925.

Dhupal D , Doloi B & Bhattacharyya B;(2007)â€œParametric analysis and optimization of Nd: YAG laser micro-grooving of aluminum titanate (Al2TiO5) ceramicsâ€ The International Journal of Advanced Manufacturing Technology 36 (9), 883-893.

Dhupal D , Doloi B & Bhattacharyya B;(2007)â€œPulsed Nd: YAG laser turning of micro-groove on aluminum oxide ceramic (Al2O3)â€ International Journal of Machine Tools and Manufacture 48 (2), 236-248.

Dhupal D , Doloi B & Bhattacharyya B;(2007)â€œOptimization of process parameters of Nd: YAG laser microgrooving of Al2TiO5 ceramic material by response surface methodology and artificial neural network algorithmâ€ Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 221 (8) 1341-1350.

Dash, Rakesh Roshan, Dash, R. R. â€œUse of ecotoxicology for municipal solid waste and leachate from sanitary landfillâ€, Standards India, 2012, 26 (5), 5-10.

Dash, Rakesh Roshan, Kumar, P., Mehrotra, I., Uniyal, H. P. â€œBed Filtration: Water Quality Evaluation at Kalsiâ€, Journal of Indian Water Resources Society, 2005, 25 (2), 31-38.

Dash, R., Dash, Rakesh Roshan â€œBank Filtration: An Indirect Method of Artificial Rechargeâ€, Standards India, 2012, 25 (12), 10-16 .

Sahoo, S., Mohanty C. R., Panda, H., Dash, Rakesh R. â€œIndustrial wastes for filling materialsâ€, Recent Research in Science and Technology, 2014, 6(1): 101-105.

Panda, H., Sahoo S., Mohanty C. R., Dash Rakesh Roshan â€œRemoval of hexavalent chromium from aqueous solution by using industrial wasteâ€, Recent Research in Science and Technology, 2014, 6(1): 106-110.

Dash, R. , Dash, Rakesh Roshan, Balomajumdar, C., Kumar, A. â€œBiodegradation of metal cyanides from cyanide bearing simulated wastewaters by suspended cultures of Stemphylium loti (MTCC 2542)â€, International J. Geotechnics and Environment, 2010, 2 (1), 45-54.

Dash, Rakesh Roshan, Mehrotra, I., Kumar, P., Grischek, T. â€œStudy of water quality improvements at a riverbank filtration site along the upper course of the River Ganga, Indiaâ€, Desalination and Water Treatment, 2014, 52 (16-18): 3355-3366.

â€œRiver Bank Filtration in Haridwar, India: Removal of Turbidity, Organics, and Bacteriaâ€, Hydrogeol J., 2010, 18(4): 973-983.

Dash, Rakesh Roshan, Mehrotra, I., Kumar, P., Grischek, T. â€œLake Bank Filtration at Nainital, India: Water Quality Evaluationâ€, Hydrogeol J., 2008, 16(6): 1089-1099.

Dash, R., Dash, Rakesh Roshan, Balomajumdar, C. â€œCyanide removal from aqueous solutions by immobilized whole cells of Pseudomonas putida on GACâ€, Desalination and Water Treatment, 2013,52 (16-18): 3355-3366.

Dash, R., Dash, Rakesh Roshan, Verma, A., Bhunia, P. â€œSand filtration: An effective post treatment option for aerobically treated wastewater, Journal of Industrial Research & Technology, 2012, 2(2), 81-87.

Singha, B. B., Mohanty, F, Das, S. S. and Swain, S. K. (2019) â€œGraphene Sandwiched Crumb Rubber Dispersed Hot Mix Asphalt.â€ Journal of Traffic and Transportation Engineering, DOI: https://doi.org/10.1016/j.jtte.2019.02.003

Das, S. S. and Maitra B. (2019) â€œTwo-stage choice-based demand model for rural feeder service to the bus stop,â€ Transportmetrica A: Transport Science, 15:2, 573-585, DOI: 10.1080/23249935.2018.1517134.

Pal, A. C. and Das, S. S. (2019) â€œInterlocking Aperture Concrete Block: An Answer to Permeable Pavement.â€ Journal of The Institution of Engineers (India): Series A 100: Issue 3, 427â€“438 https://doi.org/10.1007/s40030-019-00363-1

Panda, R. P., Das, S. S. and Sahoo, P. K. (2018) â€œEstimating In Situ Optimum Bitumen Content of Dense Bituminous Macadam: An Alternative Approachâ€ Journal of The Institution of Engineers (India): Series A, Volume 99, Issue 4, 653â€“659, DOI: https://doi.org/10.1007/s40030-018-0322-7

Satishkumar, B., Maitra B. and Das, S. S. (2018) â€œTemporal shift in willingness-to-pay for rural feeder service to bus stop.â€ Travel Behaviour and Society, 12, 102-107.

Tanti, K. B., Mukarjee, B. B. and Das, S. S. (2018) â€œA factorial design approach to analyse the effect of coarse recycled concrete aggregates on the properties of hot mix asphaltâ€ Journal of The Institution of Engineers (India): Series A, Volume 99, Issue 2, pp 165â€“181..DOI https://doi.org/10.1007/s40030-018-0286-7

Panda, R. P., Das, S. S. and Sahoo, P. K. (2018) â€œRelation Between Bitumen Content and Percentage Air Voids in Semi Dense Bituminous Concreteâ€ Journal of The Institution of Engineers (India): Series A, Volume 99, Issue 2, pp 327â€“332, DOI: https://doi.org/10.1007/s40030-018-0282-y .

Panda, R. P., Das, S. S. and Sahoo, P. K. (2017) â€œOptimum bitumen content for bituminious concrete â€“ An alternative approach for estimationâ€ International Journal of Civil Engineering and Technology, 8(10), pp. 435â€“453.

Panda, R. P., Das, S. S. and Sahoo, P. K. (2016). â€œAn empirical method for estimating surface area of aggregates in hot mix asphalt.â€ Journal of Traffic and Transportation Engineering, April, 2016, 3(2), 127-136.

Maitra, B., Padwal , R., Boltze, M.and Das, S. S. (2012) ‘Role of Fare Model in Design of Rural Feeder Service With Fixed-Route Fixed-Schedule Form of Operation.” ’ Indian Highway, IRC, June, pp. 83-91.

Das, S. S. and Maitra, B. (2007) ‘A Covariance Heterogeneity Nested Logit Model for Choice of Rural Feeder Service to Bus Stop’ Indian Highway, IRC, December, pp. 31-39.

Das, S. S., Maitra, B. and Boltze, M. (2007) ‘Valuing Attributes of Rural Feeder Service to Bus Stop’ Indian Highway, IRC, May, pp. 9-16.

Ghosh, S., Maitra, B. and Das, S. S., (2013) “Effect of Distributional Assumption of Random Parameters of Mixed Logit Model on Willingness-to-Pay Values.” Procedia - Social and Behavioral Sciences, 104 ( 2013 ) pp. 601- 610.

Maitra, B., Ghosh, S., Das, S. S. and Manfred Boltze (2013) “Effect of Model Specification on Valuation of Travel Attributes: A Case Study of Rural Feeder Service to Bus Stop.” Journal of Journal of Transport Literature, 7(2), 8-28 (2013).

Das, S. S, Maitra, B. and Manfred Boltze (2012) â€œPlanning of Fixed-Route Fixed-Schedule Feeder Service to Bus Stops in Rural India.â€ Transportation Engineering, 138(10), 1274-1281. 10.1061/(ASCE)TE.1943-5436.0000419.

Das, S. S., Ghosh, S., Maitra, B. and Boltze, M. (2012) “Search Strategy for Nested Logit Tree Structure: A Case Study of Rural Feeder Service to Bus Stop.” International Journal for Traffic and Transport Engineering, 2(4), 333-346.

Das, S. S, Maitra, B. and Manfred Boltze (2009) “Valuing Travel Attributes of Rural Feeder Service to Bus Stop: a Comparison of Different Logit Model Specifications.” Journal of Transportation Engineering, 135(6), pp. 330-337.

Pelusi, Danilo, Raffaele Mascella, Luca Tallini, Janmenjoy Nayak, Bighnaraj Naik, and Ajith Abraham. "Neural network and fuzzy system for the tuning of Gravitational Search Algorithm parameters." Expert Systems with Applications 102 (2018): 234-244. (Elsevier) (SCI)

Nayak, Janmenjoy, Bighnaraj Naik, Himansu Sekhar Behera, and Ajith Abraham. "Hybrid chemical reaction based metaheuristic with fuzzy c-means algorithm for optimal cluster analysis." Expert Systems with Applications 79 (2017): 282-295. (Elsevier) (SCI)

Nayak, Janmenjoy, Bighnaraj Naik, H. S. Behera, and Ajith Abraham. "Elitist teachingâ€“learning-based optimization (ETLBO) with higher-order Jordan Pi-sigma neural network: a comparative performance analysis." Neural Computing and Applications: 1-24. (Springer) (SCI)

Naik, Bighnaraj, Janmenjoy Nayak, Himansu Sekhar Behera, and Ajith Abraham. "A self adaptive harmony search based functional link higher order ANN for non-linear data classification." Neurocomputing 179 (2016): 69-87. (Elsevier) (SCI)

Nayak, Janmenjoy, and Bighnaraj Naik. "A Novel Honey-Bees Mating Optimization Approach with Higher order Neural Network for Classification." Journal of Classification (2018): 1-38. (SCI)

Nayak, Janmenjoy, Bighnaraj Naik, D. P. Kanungo, and H. S. Behera. "A hybrid elicit teaching learning based optimization with fuzzy c-means (ETLBO-FCM) algorithm for data clustering." Ain Shams Engineering Journal (2016). (Elsevier)

Naik, Bighnaraj, Janmenjoy Nayak, and H. S. Behera. "A TLBO based gradient descent learning-functional link higher order ANN: An efficient model for learning from non-linear data." Journal of King Saud University-Computer and Information Sciences, Volume 30, Issue 1, Pages 120-139 (January 2018). (Elsevier)

Naik, Bighnaraj, Janmenjoy Nayak, and Himansu Sekhar Behera. "A global-best harmony search based gradient descent learning FLANN (GbHS-GDL-FLANN) for data classification." Egyptian Informatics Journal 17, no. 1 (2016): 57-87. (Elsevier)

Nayak, Janmenjoy, Bighnaraj Naik, and H. S. Behera. "A novel nature inspired firefly algorithm with higher order neural network: performance analysis." Engineering Science and Technology, an International Journal 19, no. 1 (2016): 197-211. (Elsevier)

Nayak, Janmenjoy, Bighnaraj Naik, and H. S. Behera. "A novel chemical reaction optimization based higher order neural network (CRO-HONN) for nonlinear classification." Ain Shams Engineering Journal 6, no. 3 (2015): 1069-1091. (Elsevier)

Nayak, Janmenjoy, Bighnaraj Naik, and Himansu Sekhar Behera. "Solving nonlinear classification problems with black hole optimisation and higher order Jordan Pi-sigma neural network: a novel approach." International Journal of Computational Systems Engineering 2, no. 4 (2016): 236-251. (Inderscience)

Naik, Bighnaraj, Janmenjoy Nayak, Himansu Sekhar Behera, and Ajith Abraham. "An improved harmony search-based functional link higher order ANN for nonlinear data classification." International Journal of Intelligent Systems Design and Computing 1, no. 3-4 (2017): 286-318. (Inderscience)

Naik, Bighnaraj, Janmenjoy Nayak, and Himansu Sekhar Behera. "An efficient FLANN model with CRO-based gradient descent learning for classification." International Journal of Business Information Systems 21, no. 1 (2016): 73-116. (Inderscience)

Naik, Bighnaraj, Janmenjoy Nayak, and H. S. Behera. "FLANN+ BHO: A Novel Approach for Handling Nonlinearity in System Identification." International Journal of Rough Sets and Data Analysis (IJRSDA) 5, no. 1 (2018): 13-33. (IGI Global)

Kanungo, D. P., Janmenjoy Nayak, Bighnaraj Naik, and Himansu Sekhar Behera. "Hybrid clustering using elitist teaching learning-based optimization: an improved hybrid approach of TLBO." International Journal of Rough Sets and Data Analysis (IJRSDA) 3, no. 1 (2016): 1-19. (IGI Global)

A. Mishra, S.K. Srichandan, Bighnaraj Naik. â€œMissing Value Imputation Using ANN Optimized by Genetic Algorithmâ€. International Journal of Applied Industrial Engineering, IGI Global (Accepted, In Press)

Nayak, Janmenjoy, Bighnaraj Naik, and H. Behera. "A comprehensive survey on support vector machine in data mining tasks: applications & challenges." International Journal of Database Theory and Application 8, no. 1 (2015): 169-186.

Das, Himansu, Bighnaraj Naik, Bibudendu Pati, and Chhabi Rani Panigrahi. "A survey on virtual sensor networks framework." International Journal of Grid Distribution Computing 7, no. 5 (2014): 121-130. (SCIE)

Mahapatra, Sarita, Alok Kumar Jagadev, and Bighnaraj Naik. "Performance Evaluation of PSO Based Classifier for Classification of Multidimensional Data with Variation of PSO Parameters in Knowledge Discovery Database." International Journal of Advanced Science and Technology 34 (2011): 27-44.

S. Acharya and C.R. Tripathy, “A reliable fault-tolerant ANFIS model based data aggregation scheme for Wireless Sensor Networks”, Journal of King Saud University – Computer and Information Sciences, Elsevier, Vol. 32, pp. 741-753, 2020.

N. Acharya, P. Nanda, S. Panda and S. Acharya, “A comparative study of stability characteristics of mahua and jatropha biodiesel and their blends”, Journal of King Saud University – Engineering Sciences, Elsevier, Vol. 31, pp. 184-190, 2019.

N. Acharya, P. Nanda, S. Panda and S. Acharya, “Biodiesel from Non-Edible Vegetable Oils: A Review on Engine Performance and Emission Characteristics”, Nature Environment and Pollution Technology, Vol. 17, No. 3, pp. 711-720, 2018.

S. Acharya and C.R. Tripathy, “A Fuzzy Knowledge Based Fault Tolerance Mechanism for Wireless Sensor Networks”, International Journal of Rough Sets and Data Analysis (IJRSDA), IGI-GLOBAL, Vol. 5, No. 1, pp. 99-116, 2018.

S. Acharya and C.R. Tripathy, “An ANFIS estimator based data aggregation scheme for fault tolerant Wireless Sensor Networks”, Journal of King Saud University – Computer and Information Sciences, Elsevier, Vol. 30, No. 3, pp. 334-348, 2018.

N. Acharya, P. Nanda, S. Panda and S. Acharya, “Analysis of properties and estimation of optimum blending ratio of blended mahua biodiesel”, Engineering Science and Technology, an International Journal, Elsevier, Vol. 20, No. 2, pp. 511-517, 2017.

S. Acharya, “Study and Analysis of TCP/IP Congestion Control Techniques : A Review”, International Journal of Engineering Associates, Vol.1, No. 2, pp. 57-62, 2012.

S. Acharya, “Mathematics in Internet Traffic Data Analysis”, International Journal of Computer Science and Informatics, Vol. 1, No. 1, pp. 57-65, 2011.

Sibarama Panigrahi, and Himansu Sekhar Behera. "A study on leading machine learning techniques for high order fuzzy time series forecasting." Engineering Applications of Artificial Intelligence 87 (2020): 103245. ISSN: 0952-1976. [ELSEVIER, ScienceDirect], [SCI, Scopus][IMPACT FACTOR: 6.21] [h-Index:104]

H. Swapnarekha, H. S. Behera, D. Roy, S. Das, and J. Nayak, â€œCompetitive Deep Learning Methods for COVID-19 Detection using X-ray Images,â€ J. Inst. Eng. Ser. B, pp.1-14,Apr. 2021, doi: 10.1007/s40031-021-00589-3. [SPRINGER] [SCOPUS] [IMPACT FACTOR:0.88][h-Index:13]

H. Swapnarekha, H. S. Behera, J. Nayak, and B. Naik, â€œCovid CT-net: A deep learning framework for COVID-19 prognosis using CT images,â€ J. Interdiscip. Math., vol. 24, no. 2, pp. 327â€“352, Feb. 2021, doi: 10.1080/09720502.2020.1857905. [Taylor &Francis][SCOPUS][IMPACT FACTOR:0.64] [h-Index:14]

P. Suresh Kumar, H. S. Behera, J. Nayak, and B. Naik, â€œBootstrap aggregation ensemble learning-based reliable approach for software defect prediction by using characterized code feature,â€ Innov. Syst. Softw. Eng., May 2021, doi: 10.1007/s11334-021-00399-2. [SPRINGER] [ESCI, SCOPUS] [IMPACT FACTOR: 1.07] [h-Index:27]

P. Suresh Kumar, H. S. Behera, J. Nayak, and B. Naik, â€œA pragmatic ensemble learning approach for effective software effort estimation,â€ Innov. Syst. Softw. Eng., Jan. 2021, doi: 10.1007/s11334-020-00379-y. [SPRINGER] [ESCI, SCOPUS] [IMPACT FACTOR: 1.07] [h-Index:27]

D. K. K. Reddy, H. S. Behera, J. Nayak, B. Naik, U. Ghosh, and P. K. Sharma, â€œExact greedy algorithm based split finding approach for intrusion detection in fog-enabled IoT environment,â€ Journal of Information Security and Applications, vol. 60, no. June, p. 102866, Aug. 2021, doi: 10.1016/j.jisa.2021.102866. [ELSEVIER, SCIENCEDIRECT][SCIE, SCOPUS] [IMPACT FACTOR: 3.872] [h-Index:40]

D. K. Reddy, H. S. Behera, J. Nayak, P. Vijayakumar, B. Naik, and P. K. Singh, â€œDeep neural network based anomaly detection in Internet of Things network traffic tracking for the applications of future smart cities,â€ Transactions on Emerging Telecommunications Technology, vol. 32, no. 7, pp. 1â€“26, Jul. 2021, doi:10.1002/ett.4121. [WILEY] [SCIE, SCOPUS] [IMPACT FACTOR: 2.638] [h-Index:47]

K.K. Sahu, S.C. Nayak, H. S. Behera, Multi-Step-Ahead Exchange Rate Forecasting For South Asian Countries Using Multi-Verse Optimized Multiplicative Functional Link Neural Networks, Karbala International Journal of Modern Science, 7.1 (2021): 48-60 (University of Kerbala, Scopus Journal, Unpaid)[SCOPUS] [IMPACT FACTOR: 2.93] [h-Index:17]

Pattanayak, R.M., Behera, H.S., Panigrahi, S.: A Non-Probabilistic Neutrosophic Entropy Based Method For High-Order Fuzzy Time-Series Forecasting. Arabian Journal for Science and Engineering, 1-23 (2021), Springer, ( SCI, Scopus ). (IF: 2.334). https://doi.org/10.1007/s13369-021-05718-0[SCI, SCOPUS] [IMPACT FACTOR: 2.334] [h-Index:37]

Das, H., Naik, B., &Behera, H. S., (2021). â€Optimal Selection of Features using Artifificial Electric Field Algorithm for Classificationâ€, Arabian Journal for Science and Engineering, Springer. DOI: https://doi.org/10.1007/s13369-021-05486-x [SCI, SCOPUS] [IMPACT FACTOR: 2.334] [h-Index:37]

H. Swapnarekha, H. S. Behera, J. Nayak, and B. Naik, â€œRole of intelligent computing in COVID-19 prognosis: A state-of-the-art review,â€ Chaos, Solitons & Fractals, vol. 138, p. 109947, Sep. 2020, doi: 10.1016/j.chaos.2020.109947. [ELSEVIER, SCIENCEDIRECT] [SCI] [IMPACT FACTOR: 3.764] [h-Index:139]

P. S. Kumar, H. S. Behera, K. Anisha Kumari, J. Nayak, and B. Naik, â€œAdvancement from neural networks to deep learning in software effort estimation: Perspective of two decades,â€ Computer Science Review, vol. 38. p. 100288, Nov. 2020, doi: 10.1016/j.cosrev.2020.100288. [ELSEVIER, SCIENCEDIRECT] [Indexing: SCIE, SCOPUS] [IMPACT FACTOR: 7.707] [h-Index:44]

Pattanayak, R.M., Panigrahi, S., Behera, H.S.: High-Order Fuzzy Time Series Forecasting by Using Membership Values Along with Data and Support Vector Machine. Arabian Journal for Science and Engineering, Springer ( SCI, Scopus ), 45, 10311â€“10325 (2020). https://doi.org/10.1007/s13369-020-04721-1[Indexing: SCI, SCOPUS] [IMPACT FACTOR: 2.334] [h-Index:37]

Pattanayak, R.M., Behera, H.S., Panigrahi, S.: A Novel Probabilistic Intuitionistic FuzzySet Based Model for High Order Fuzzy Time Series Forecasting. Engineering Applications of Artificial Intelligence,https://doi.org/10.1016/j.engappai.2020.104136 [ELSEVIER, ScienceDirect] [Indexing: SCI, SCOPUS] [IMPACT FACTOR: 2.334] [h-Index:104]

Das, H., Naik, B., &Behera, H. S., (2020). â€A Jaya Algorithm based Wrapper Method for Optimal Feature Selection in Supervised Classificationâ€. Journal of King Saud University - Computer and Information Sciences, DOI: 10.1016/j.jksuci.2020.05.002 (SCI, Scopus) IF: 13.473 (In Press) [ELSEVIER, ScienceDirect] [ SCOPUS, SCIE ][IMPACT FACTOR: 13.473] [h-Index:33]

Das, H., Naik, B., Behera, H. S., Jaiswal, S., Mahato, P., & Rout, M., (2020). â€Biomedical Data Analysis using Neuro-Fuzzy Model with Post-feature Reductionâ€, Journal of King Saud University - Computer and Information Sciences, DOI: 10.1016/j.jksuci.2020.01.007 [ELSEVIER, ScienceDirect] [SCIE, SCOPUS][IMPACT FACTOR: 13.473] [h-Index:33]

Das, H., Naik, B., &Behera, H. S., (2020). â€A Hybrid Neuro-Fuzzy and Feature Reduction Model for Classificationâ€, Volume:2020, pp. 1-15, Advances in Fuzzy System, Hindawi. DOI: 10.1155/2020/4152049 [SCOPUS][IMPACT FACTOR: 1.71] [h-Index:19]

Das, H., Naik, B., &Behera, H. S., (2020). â€Medical Disease Analysis using Neuro-Fuzzy with Feature Extraction Model for Classificationâ€,Volume: 18, pp. 1-12, Informatics in Medicine Unlocked, DOI: 10.1016/j.imu.2019.100288 [ELSEVIER, ScienceDirect] [SCOPUS][IMPACT FACTOR: 2.110] [h-Index:21]

K.K. Sahu, S.C. Nayak, H. S. Behera, Forecasting currency exchange rate time series with fireworks-algorithm-based higher order neural network with special attention to training data enrichment, Computer Science 21.4 (2020): 463-489. [SCOPUS ][IMPACT FACTOR: 0.81] [h-Index:28]

Sibarama Panigrahi, and H. S. Behera. "Time Series Forecasting Using Differential Evolution-Based ANN Modelling Scheme." Arabian Journal for Science and Engineering 45.12 (2020): 11129-11146. ISSN: 2191-4281 [Springer] [IMPACT FACTOR:2.33][SCI, Scopus] [h-Index: 43]

Sibarama Panigrahi, and Himansu Sekhar Behera. "Nonlinear time series forecasting using a novel self-adaptive TLBO-MFLANN model." International Journal of Computational Intelligence Studies 8, no. 1-2, 4-26, 2019. [SCIE, SCOPUS] [IMPACT FACTOR: 1.83] [H-index:38]

Sibarama Panigrahi, and Himansu Sekhar Behera. â€œA computationally efficient method for high order fuzzy time series forecasting.â€ Journal of Theoretical & Applied Information Technology, 96, pp.7215-7226, 2018. [Scopus, SCI, UGC Care Listed] [IMPACT FACTOR: 0.60] [H-index:29]

Sibarama Panigrahi, and Himansu Sekhar Behera. "A hybrid ETSâ€“ANN model for time series forecasting." Engineering Applications of Artificial Intelligence 66 (2017): 49-59. ISSN: 0952-1976 [ELSEVIER, ScienceDirect] [SCI, Scopus] [IMPACT FACTOR: 6.21] [h-Index:104]

P. K. Das, H. S. Behera, P. K. Jena, and B. K. Panigrahi. An Intelligent Multi- Robot Path Planning in a Dynamic Environment Using Improved Gravitational Search Algorithm. International Journal of Automation and Computing, Vol-7, pages 1-13, 2016.[SPRINGER][Indexing: SCI, SCOPUS][IMPACT FACTOR: 3.17] [h-Index:36]

K.K. Sahu, S.R. Sahu, G.R. Biswal, P.K. Sahu, H. S. Behera, Chemical reaction optimisationâ€¯: a hybrid technique applied to functional link artificial neural networks with least mean square learning for foreign exchange rates forecasting, International Journal of Swarm Intelligence 2.2-4 (2016): 254-282. [InderScience] [Google Scholar, J-Gate]

JanmenjoyNayak, Bighnaraj Naik, D. P., Kanungo, H. S. Behera â€œA Hybrid Elicit Teaching Learning based Optimization with Fuzzy c-means (ETLBO-FCM) Algorithm for Data Clusteringâ€, Ain Shams Engineering Journal, DOI: http://dx.doi.org/10.1016/j.asej.2016.01.010, 2016.[ELSEVIER, ScienceDirect][SCIE SCOPUS][IMPACT FACTOR: 3.180] [h-Index:46]

Bighnaraj Naik, Janmenjoy Nayak and H. S. Behera, â€œA TLBO based gradient descent learning-functional link higher order ANN: An efficient model for learning from non-linear dataâ€, Journal of King Saud University - Computer and Information Sciences, ISSN: 1319-1578, 2016 [ELSEVIER, ScienceDirect] [SCIE, SCOPUS][IMPACT FACTOR:13.473][h-Index:33]

Bighnaraj Naik, Janmenjoy Nayak and H. S. Behera, â€œA self adaptive harmony search based functional link higher order ANN for non-linear data classificationâ€, Neurocomputing,2016. [ELSEVIER, ScienceDirect] [SCOPUS][IMPACT FACTOR: 5.719] [h-Index:143]

P.K. Das, H. S. Behera, P. K. Jena, B.K. Panigrahi, â€œAn Intelligent Multi-Robot Path Planning in a dynamic Algorithmâ€, International Journal of Automation and Computing, Springer, ISSN: 1476-8186 2016. [SCIE, SCOPUS][IMPACT FACTOR: 3.17] [h-Index:36]

S.C.Nayak, B.Misra, H. S. Behera â€œFluctuation prediction of stock market index by adaptive evolutionary higher order neural networksâ€, International Journal of Swarm Intelligence, ISSN print: 2049-4041, Vol â€“ 2, Issue â€“ 2-4, pp â€“ 229-253, 2016. [InderScience] [Google Scholar, J-Gate, ProQuest Advanced Technologies Database with Aerospace]

K.K.Sahu, S.R.Sahu, G.R.Biswal, P.K.Sahu, H. S. Behera â€œChemical Reaction Optimization: A Hybrid technique applied to Functional Link Artificial Neural Networks with Least Mean Square Learning for Foreign Exchange Rates Forecastingâ€, International Journal of Swarm Intelligence, ISSN print: 2049-4041, 2016. [InderScience] [Google Scholar, J-Gate]

K.K.Sahu, S.R.Sahu, S.C.Nayak, H. S. Behera â€œForecasting Foreign Exchange Rates Using CRO Based Different Variants of FLANN and Performance Analysisâ€, International Journal of Computational System Engineering,2016. [Inderscience] [SCIE, SCOPUS][IMPACT FACTOR: 1.838] [h-Index:21]

JanmenjoyNayak, BighnarajNaik, H. S. Behera â€œSolving nonlinear Classification Problems with Black Hole Optimization and Higher Order Jordan Pi-sigma Neural Network: A Novel Approachâ€, International Journal of Computational System Engineering, 2016. [Inderscience][ SCIE, SCOPUS][IMPACT FACTOR: 1.838] [h-Index:21]

P.K., Das, H.S., Behera, S.K., Pradhan, H.K., Tripathy and P.K., Jena 2017. â€œImproved real time A*-fuzzy controller for improving multi-robot navigation and its performance analysisâ€. International Journal of Data Science, 2(2), pp.105-137. [Inderscience] [Google Scholar, J-Gate]

S. R., Sahu, D.P., Kanungo, and H. S. Behera â€œA Modified Fruit Fly Optimization for Classification of Financial Distress using FLANNâ€, International Journal of Data Science (IJDS), 2, no. 2 (2017): 155-172. [Inderscience] [Google Scholar, J-Gate]

Bighnaraj Naik, JanmenjoyNayak and H. S. Behera, â€œAn efficient FLANN Model with CRO based Gradient Descent Learning for Classificationâ€, International Journal of Business Information Systems(IJBIS), Inderscience, Vol.21, No.1, pp.73 â€“ 116, ISSN: 1746-0972, 2016.[Inderscience] [SCOPUS][IMPACT FACTOR: 0.95] [h-Index:26]

D. P., Kanungo, Janmenjoy Nayak, B., Naik and H. S. Behera, â€œHybrid Clustering using Elitist Teaching Learning based Optimization- An Improved Hybrid Approach of TLBOâ€, International Journal of Rough Sets and Data Analysis (IJRSDA), ISSN: 2334-4598,Vol. 3(1), pp. 1-19, 2016. [IGI-Global], [ACM Digital Library, Google Scholar]

Janmenjoy Nayak, Bighnaraj Naik, and H. S. Behera. "A novel Chemical Reaction Optimization based higher order Neural Network (CRO-HONN) for nonlinear classification." Ain Shams Engineering Journal,Volume 6, Issue 3, September 2015, pp. 1069-1091, ISSN: 2090-4479, SNIP: 0.932, DOI:10.1016/j.asej.2014.12.013, 2015. [ELSEVIER, ScienceDirect] [ SCOPUS-SCIE][IMPACT FACTOR: 3.180] [h-Index:46]

S. C., Nayak, B. B., Mishra, and H. S. Behera, â€œArtificial Chemical Reaction Optimization of Neural Networks for Efficient Prediction of Stock Market Indexâ€, Ain Shams Engineering Journal, ISSN: 2090-4479, 2015, DOI:10.1016/j.asej.2014.12.013,2015. [ELSEVIER, ScienceDirect] [ SCOPUS-SCIE][IMPACT FACTOR: 3.180] [h-Index:46]

BighnarajNaik, JanmenjoyNayak and H. S. Behera, â€œA Global-best Harmony Search based Gradient Descent Learning FLANN (GbHS-GDL-FLANN) for Data Classificationâ€, Egyptian Informatics Journal, ISSN: 1110-8665, 2015. [ELSEVIER, ScienceDirect] [SCIE][IMPACT FACTOR: 3.943] [h-Index:34]

Janmenjoy Nayak, Bighnaraj Naik, and H. S. Behera. "A novel nature inspired firefly algorithm with higher order neural network: Performance analysisâ€, Engineering Science and Technology, an International Journal, ISSN: 2215-0986,2015 [ELSEVIER, ScienceDirect] [ SCOPUS-SCIE][IMPACT FACTOR: 4.36] [h-Index:50]

P.K. Das, H. S. Behera, B.K. Panigrahi, â€œA hybridization of an Improved Particle Swarm optimization and Gravitational Search Algorithm for Multi-Robot Path Planningâ€, Swarm and Evolutionary Computation, ISSN: 2210-6502, 2015 [ELSEVIER, ScienceDirect] [SCI, SCOPUS][IMPACT FACTOR: 7.177][h-Index:65]

P.K. Das, H. S. Behera, S. Das, H.K. Tripathy, B.K. Panigrahi, S.K. Pradhan, â€œA Hybrid Improved PSO-DV Algorithm for Multi-Robot Path Planning in a Clutter Environmentâ€,Neurocomputing,2015. [ELSEVIER, ScienceDirect] [SCOPUS][IMPACT FACTOR: 5.719] [h-Index:143]

P.K. Das, H. S. Behera, B.K. Panigrahi, â€œIntelligent-based multi-robot path planning inspired by improved Classical Q-learning and improved particle swarm optimization with perturbed velocityâ€, Engineering Science and Technology, an International Journal, ISSN: 2215-0986,2015 [ELSEVIER, ScienceDirect] [SCIE, SCOPUS-SCIE][IMPACT FACTOR: 4.36] [h-Index:50]

P.K. Das, H. S. Behera, B.K. Panigrahi, â€œMulti-Robot Path Planning in a dynamic environment using Improved Gravitational Search Algorithmâ€, Journal ofElectrical Systems and Information Technology, ISSN: 2314-7172,2015 [ELSEVIER, ScienceDirect]

Bighnaraj Naik, Janmenjoy Nayak, H. S. Behera and A. Abraham, â€œAn improved harmony search-based functional link higher order ANN for nonlinear data classificationâ€, International Journal of Intelligent Systems Design and Computing, ISSN: 2052-8477, 2015 (In Press). [Inderscience][SCOPUS][IMPACT FACTOR: 0.78]

S R Sahu and H. S. Behera â€œA hybrid CRO-based FLANN for financial stock market forecastingâ€ International Journal of Data Analysis Techniques and Strategies, Inderscience (Scopus, ACM Digital Library, Google Scholar, Inspec ,Institution of Engineering and Technology), 2015. [SCOPUS][IMPACT FACTOR: 0.50] [h-Index:15]

S. C., Nayak, B. B., Mishra, and H. S. Behera, â€œExploration and Incorporation of Virtual Data Position for Efficient Forecasting of Financial Time Seriesâ€, International Journal of Industrial and Systems Engineering, ISSN: 1748-5037, 2015.[Inderscience] [SCOPUS][IMPACT FACTOR: 0.85] [h-Index:27]

H. S. Behera, Janmenjoy Nayak, M., Nanda and K., Nayak, â€œA Novel Hybrid Approach for Real World Data Clustering Algorithm based on Fuzzy C-means and Firefly Algorithm (FCM-FA)â€, International Journal of Fuzzy Computation and Modelling, ISSN : 2052-353X, Vol. 1(4), pp. 431-448, 2015. [Inderscience] [Google Scholar, J-Gate]

H. S. Behera, M Nanda, K Nayak, Janmenjoy Nayak, â€œA Hybrid Fuzzy Firefly based Evolutionary Radial Basis Functional Network for Classification â€œ, International Journal of Information Processing, Vol. 9 (3), pp. 76-91, 2015, ISSN: 0973â€“8215. [Google Scholar, arXiv, Indian Citation Index, getCITED]

S. C., Nayak, B. B., Mishra, and H. S. Behera, â€œAn adaptive second order neural network with genetic algorithm based training (ASONN-GA) to forecast the closing prices of the stock marketâ€, International Journal of Applied Metaheuristic Computing, 2015.[IGI Global] [ACM Digital Library, DBLP, INSPEC, Google Scholar] [IMPACT FACTOR: 0.6607] [h-Index:4]

S. C., Nayak, B. B., Mishra, and H. S., Behera, â€œA neuro-fuzzy hybrid network for stock future index forecastingâ€,International Journal of Computer Science and Technology, Vol. 5, pp. 95-100,2014. [DOAJ. Google Scholar]

Janmenjoy Nayak, Bighnaraj Naik and H. S. Behera."A Comprehensive Survey on Support Vector Machine in Data Mining Tasks: Applications & Challenges." International Journal of Database Theory and Application, Vol. 8(1), pp. 169-186, 2014.[Google Scholar, ULRICH][IMPACT FACTOR: 0.242] [h-Index:4]

S. C., Nayak, B. B., Mishra, and H. S., Behera, â€œSoft and Evolutionary Computing Techniques for Stock Market Forecasting: A Surveyâ€, European Journal of Academic Essays, Vol. 2,2014.[Google Scholar]

S.C.Nayak, B.B.Mishra and H. S. Behera, â€œImpact of Data Normalization on Stock Index Forecastingâ€, International Journal of Computer Information Systems and Industrial Management Applications, ISSN 2150-7988, Vol 6, pp. 257 â€“ 269, 2014.[SCI, SCOPUS][IMPACT FACTOR: 0.33] [h-index:6]

K.K.Sahu, SibaramaPanigrahi and H. S. Behera, â€œA novel Chemical Reaction Optimization Algorithm for Higher Order Neural Network Trainingâ€, Journal of Theoretical and Applied Information Technology, E-ISSN 1817-3195 / ISSN 1992-8645, IF: 1.71, Vol. 53, issue 3, July 2013, pp 402-409.[ELSEVIER, ScienceDirect] [ SCOPUS][IMPACT FACTOR: 0.60] [h-Index:29]

JosabantaKarali, SibaramaPanigrahi and H. S. Behera, â€œA Novel Differential Evolution Based Algorithm for Higher Order Neural Network Trainingâ€, Journal of Theoretical and Applied Information Technology E-ISSN 1817-3195 / ISSN 1992-8645, Vol. 56, Issue No. 2, pp 355-361, Oct 2013.[ELSEVIER, ScienceDirect] [ SCOPUS][IMPACT FACTOR: 0.60] [h-Index:29]

Josabanta Karali, SibaramaPanigrahi, H. S. Behera, â€œA Novel Differential Evolution Based Algorithm for Higher Order Neural Network Trainingâ€,Journal of Theoretical and Applied Information Technology E-ISSN 1817-3195 / ISSN 1992-8645, Vol. 56 Issue 2, pp 355-361, 2013. [ELSEVIER, ScienceDirect] [SCOPUS][IMPACT FACTOR: 0.60] [h-Index:29]

K.K.Sahu, Sibarama Panigrahi and H. S. Behera, â€œA novel Chemical Reaction Optimization Algorithm for Higher Order Neural Network Trainingâ€, Journal of Theoretical and Applied Information, E-ISSN 1817-3195 / ISSN 1992-8645, Vol. 53 Issue 3, pp 402-409, 2013. [ELSEVIER, ScienceDirect] [SCOPUS][IMPACT FACTOR: 0.60] [h-Index:29]

Archana Baral and H. S. Behera, â€œA Novel Chemical Reaction Based Clustering and its Performance Analysisâ€,International Journal of Business Intelligence and Data Mining, ISSN: 1743-8187,Vol 8 No. 2, pp 184-198, 2013. [Inderscience,ACM Digital Library] [SCOPUS][IMPACT FACTOR: 0.61] [h-Index:19]

B.Biswal, H. S. Behera, R.Bisoi and P.K.Dash â€œClassification of Power Quality Data Using Decision Tree and Chemotactic Differential Evolution Based Fuzzy Clusteringâ€ Swarm and Evolutionary Computation, ISSN: 2210-6502, Vol. 4, pp. 12-24, 2012. [ELSEVIER, ScienceDirect] [SCI, SCOPUS][IMPACT FACTOR: 7.177] [h-Index:65]

H. S. Behera, Ritesh Kumar Jha, RakeshMohanty, Sukant Kumar Bishi, â€œOff-Line List Accessing Algorithms With Circular Doubly Linked List And Partial Cost Modeâ€, Journal of Current Trends in Information Technology, STM Journals, ISSN:2249- 4707, Vol 1, Issue 1, PP 16-22, 2011.[DOAJ,J-Gate, Index Copernicus, Worldcat]

H. S. Behera, Jajnaseni Panda, Dipanwita Thakur, SubasiniSahoo, â€œA Clustering Based CPU Scheduling Algorithm for Real Time Systemsâ€, International Journal of Current Trends in Information Technology, STM Journals, ISSN 2249- 4707, Vol 1, Issue 1, PP 1-7, 2011.[DOAJ,J-Gate, Index Copernicus, Worldcat]

H. S. Behera>, P. K. Dash and B Biswal, â€œPower Quality Time Series Data Mining using S-Transform and Fuzzy Expert Systemâ€ Journal of Applied Soft Computing, ISSN No. 1568-4946, IF: 2.970, Vol 10, Issue 3, pp 945-955, 2010.[ELSEVIER, ScienceDirect] [SCI, SCOPUS][IMPACT FACTOR: 6.725] [h-Index:143]

P. K. Dash, H. S. Behera and IWC Lee "Time Sequence Data Mining using Time- Frequency Analysis and Soft computing Techniques", Journal of Applied Soft Computing, ISSN No. 1568-4946, IF: 2.970, Vol:8 Issue 1, pp. 212-226, Jan 2008.[ELSEVIER, ScienceDirect] [SCI, SCOPUS][IMPACT FACTOR: 6.725] [h-Index:143]

Rao D.C., Kabat, M.R., Das, P.K. and Jena, P.K., Hybrid IWD-DE: a novel approach to model cooperative navigation planning for multi-robot in unknown dynamic environment. Journal of Bionic Engineering, 16(2), pp.235-252, 2019, Springer.

Rao D. C., Kabat, M. R., Das, P. K., and Jena, P. K., Cooperative navigation planning of multiple mobile robots using improved krill herd. Arabian Journal for Science and Engineering, 43(12), 7869-7891, 2018, Springer

B. Kar, D. C. Rao, and A. K. Rath, â€œGenerating PNS for Secret Key Cryptography Using Cellular Automatonâ€, International Journal of Advanced Computer Science and Applications, Vol. 2, No. 5, 2011.

A. Tripathy, G. Nath and R. Paikaray(2016), “Determination of compatible solvent concentration for dewaxing of crude oil using ultrasonic technique” Journal of Acoustical Society of India,Vol.43,No.3,pp-138-145.

G. Nath, B.K. Lotte, P.P. Tripathy, R. Giri and R. Paikaray(2016), “Study of physical and acoustical properties of silver nanofluid ” Journal of Pure and Applied Ultrasonics, Vol.38,No.2,pp-35-39. ISSN 0256-4637.

R Giri and G Nath,(2015) “Ultrasonic analysis of acoustic properties of binary mixture for extraction of Cerium Oxide (CeO2 )” Ultrasonics, 86,pp-34697-34701.

R Giri and G Nath, (2015), “Ultrasonic study of solvent extractant in nuclear technology”, Journal of Pure and Applied Ultrasonics, Vol.37,No.2,44 â€“ 47. ISSN 0256-4637.

A.Sarangi, G. Nath , S.K.Swain, R.Paikaray, (2015)Â “Effect of Frequency on Physical Properties of Date Palm Fiber -PVA Composites” International Journal of Science and Research, 22(24),364-366 ISSN 2319-7064 DOI: 10.1111/j.1753-4887.2009.00189.x

G Nath, A Tripathy, R Paikaray, (2015), “ Ultrasonic Study on Solvent Dewaxing Process of Crude Petroleum Oil ” International Journal of Science and Research, 22(24),275-277 ,ISSN 2319-7064 DOI: 10.1111/j.1753-4887.2009.00189.x

R Giri, G Nath, PK Kar, R Paikaray, (2015)Â “ Ultrasonic Analysis of Solvent Extrancts for Nuclear Reactor Materials , International Journal of Science and Research, 22(24),258-260,ISSN 2319-7064 DOI: 10.1111/j.1753-4887.2009.00189.x

G.R.Mishra,G.Nath and R.Paikaray, (2015) “Ultrasonic Study on Alkaline Treatment of Natural Fiber”, International Journal of Science and Research 22(24),415-417, ISSN 415-416, DOI: 10.1111/j.1753-4887.2009.00189.x

G.Nath (2015)“ Effect of streaming and temperature anisotropy in Wiedemann-Franz law for collisional magnetoplasma ” Journal for Foundations and Applications of Physics,Vol.2,No.1,pp-1-6 ISSN 2394-3688.

G.Nath,A.Sarangi and R.Paikaray,(2013), “Ultrasonic study of chemical mixture used for preparation of fiber from date palm leaves”, Journal of Acoustic Society of India, Vol-4,pp- 245-249, ISSN 0973-3302.

G.Nath, S.K.Swain,A.Sarangi and R.Paikaray,(2013) Sonochemical Analysis of Solvent Mixtures Used for Surface Treatment of Natural Fibers, Journal of Pure and Applied Ultrasonics,Vol-35,pp-133, ISSN 0256-4637.SSN 0256-4637.

S .Sahu, G. Nath and R.Paikaray,(2012) “Study on Molecular Interactions in binary mixture at variableÂ Â frequencies using Ultrasonic technique” Research Journal of Chemical Sciences, Vol. 2,No-11,pp-Â 64-66, ISSN-2231-606X.

G.Nath,(2012) “Ultrasonic study of binary mixture of acetone with bromobenzene and chlorobenzene at different frequencies”,Chemical Science Transactions,Vol-1,No-3,pp-516-521,ISSN-2278-3458/2278-3318, DOI:10.7598/cst2012.171

G.Nath and S.Barik, (2010)“The Cross field diffusion and transport in a collisional magneto plasma in presence ofÂ Â Neutrals”, International Journal of Physics, Vol.1,pp-57, ISSN-0975-7155.

G.Nath and R.Paikaray,(2010) “Effect of frequency on thermo acoustics and nonlinearity parameter(B/A)of binary mixture”, International Journal of Physics, Vol.2,pp- 95, ISSN-0975-7155.

G.Nath and R.Paikaray,(2009) “Role of frequency in studying intermolecular interactions in a binary mixture of industrial importance liquid”, Ultra Scientist of Physical Sciences, Vol-1,pp- 99 ISSN-0975-7155.

G.Nath and R.Paikaray, (2009),“Frequency dependent studies of acoustic parameters in binary mixture of non-polar and polar liquid”, Ultra Scientist of Physical Sciences,Vol-2,pp- 333 ISSN-0975-7155.

G.Nath and K.C.Baral,(2008),Wiedemann â€“ Franz ratio for a thermally anisotropic, collisional magnetoplasma stream,Buuletin of Pure and Applied Physics,Vol- 1,pp- 65, ISSN-0970-6569.

G.Nath,S.Acharaya and R.Paikaray,(2007) “Ultrasonic study of binary mixtures of acetone with mono-substitutedÂ benzene at different frequencies”, Journal of Acoustic Society of India,Vol- 4,pp-135, ISSN#0253-7257.

R.Giri and G.Nath, (2016), “Physicochemical study of extractants for extraction of rare earth element”, Journal of Analytical Science and Technology, DOI 10.1186/s40543-016-0101-x.

G Nath and S P Mishra,(2016), “Study of physical and sound absorbing property of epoxy blended coir dust biocomposite” Materials Science and Engineering, 149 ,012101 doi:10.1088/1757-899X/149/1/012101.

A.Sarangi,G.Nath,S.K.Swain and R.Paikaray,(2014)” Chemical Modification of Natural Fibers with Acetone Blended Alcohols ” Advanced Science Letters,20(3-4),pp-570-573,ISSN 19366612 DOI: 10.1166/asl.2014.5367.

A Sarangi, G Nath, SK Swain(2014) “ Compatibility study of binary mixture for surface modifications of natural fibers using ultrasonic technique at different frequencies ” Indian Journal of Pure & Applied Physics,Vol- 52 ,No.1,pp- 30-34 ISSN 0019-5596.

G.Nath,A.Tripathy and R.Paikaray,(2013), “Study of Acoustic Parameters in binary mixture at variable frequencies”International Journal of Thermophysics ,Vol-34,No.11,pp-2160-2172.

G.Nath, S. Sahu and R.Paikaray,(2009), “Study of acoustic parameters of binary mixtures of a non-polar liquid with polar liquid at different frequencies”, Indian Journal of Physics, Vol-83,No.4,pp- 429-436 ,ISSN#0973-1458.

G.Nath, and R.Paikaray,(2009) “Ultrasonic study of binary mixtures of acetone with chlorobenzene at different frequencies”, Indian Journal of Physics, Vol.83,No.9,pp-1309-1314,ISSN#0973-1458.

G.Nath, S. Sahu and R.Paikaray,(2009) “Effect of frequency on acoustic parameters in a binary mixture of polar liquids”, Indian Journal of Physics,Vol- 83,No.11,pp-1567-1574 ISSN#0973-1458.

K.C.Baral and G.Nath,(2008) “Diffusion and transport phenomena in a collisional magnetoplasma with temperature anisotropy”, Indian Journal of Pure & Applied Physics, Vol.46,No.2,pp-111, ISSN#0019-5596.

J.N.Mohanty,K.C.Baral and G.Nath,(2007) “Diffusion and transport phenomena in a collisional magneto plasma having both streaming and temperature anisotropy: Collisional kinetics”, PRAMAN, Vol.68,No.3,pp-457-466 ,ISSN#0304-4289.

â€œGreen synthesis, characterization and antibacterial activity studies of new multifunctional nano polymeric material, which may have multidimensional application in water purificationâ€ Polymer Bulletin (published online) DOI: 10.1007/s00289-021-04046-5

â€œSynthesis and Characterization of Graphene Oxide and Graphene from Coalâ€ MaterialsToday:Proceedings,56,2421(2022).DOI:10.1016/j.matpr.2021.08.206

â€œSynthesis and Characterization of a Novel Silver Nanoparticles decorated functionalized Single-walled Carbon Nanotubes Nanohybrids embedded Polyaniline Ternary Nanocomposites: Thermal, Dielectric, and Sensing Propertiesâ€ Polymer-Plastics Technology and Materials (published Online) DOI: 10.1080/25740881.2022.2101118.

â€œNano BN reinforced cellulose-based terpolymeric hybrid nanocomposites as packaging materialsâ€ Polymer-Plastics Technology and Materials, 61(11), 1233 (2022). DOI: 10.1080/25740881.2022.2044048

â€œGreen solvents: A suitable alternative for sustainable chemistryâ€ Materials Today: Proceedings, 47(5), 1234 (2021). DOI: 10.1016/j.matpr.2021.06.458.

â€œAntibacterial Activity of Thiazole and its Derivatives: A Reviewâ€ Biointerface Research in Applied Chemistry, 12(2), 2171(2022). DOI: 10.33263/BRIAC122.21712195

â€œPreparation and Characterization of Silver Nanoparticles/Graphene Oxide Hybrid Nanofiller Reinforced-Polyanilineâ€ Plastics, Rubber and Composites: MacromolecularEngineering,51(2),72(2022).DOI:10.1080/14658011.2021.1939587

â€œAntimicrobial and barrier properties of polyacrylic acid/GO hybrid nanocomposites for packaging applicationâ€ Nano-Structures & Nano-Objects, 26, 10074(2021). DOI: 10.1016/j.nanoso.2021.100747

â€œA Comprehensive Review on Quinones based Fluoride Selective Colorimetric and Fluorescence Chemo sensorsâ€ Journal of Fluorine Chemistry, 244, 109744 (2021) DOI: 10.1016/j.jfluchem.2021.109744

â€œEffect of presence of tetra alkyl ammonium bromides on solution behaviour of 1-Butyl-2, 3-dimethylimidazolium chloride at different temperatures: Volumetric and Acoustic studiesâ€ Chemical Data Collection (Elsevier) ,28,100438(2020) DOI:10.1016/j.cdc.2020.100438

â€œRhodamine B associated Ag/r-GO nanocomposites as ultrasensitive fluorescent sensor for Hg2+â€ Microchemical Journal, (Elsevier) (Impact Factor: 3.206) 154, 104577 (2020) doi.org/10.1016/j.microc.2019.104577.

â€œHighly orange fluorescence emission by water soluble gold nanoclusters for â€œturn offâ€ sensing of Hg2+ ionâ€ Journal of Photochemistry & Photobiology, A: Chemistry (Elsevier) (Impact Factor: 3.261), 386, 112098 (2020). DOI: 10.1016/j.jphotochem.2019.112098.

â€œ Ultrasonic studies on temperature dependence of ion solvent interactions of ionic liquid 1-butyl-2,3- dimethylimidazolium chloride in aqueous solutions of tetra-n-butylammonium bromide at T = (298.15 to 313.15) Kâ€ Biointerface Research in Applied Chemistry,10(2), 5259-5265 (2020) DOI:10.33263/BRIAC102.259265

â€œ Applicability of Thermoacoustic parameters for the Determination of Intermolecular FreeLength of 1-Butyl-2,3-dimethyl Imidazolium Chloride in Mixed Solvents at T = 298.15 K to 313.15 Kâ€ Asian Journal of Chemistry ,2719, 31(12), 2019.DOI: 10.14233/ajchem.2019.22124

â€œNano Gold Hybrid Polyvinyl Alcohol Films for Sensing of Cu2+ ionsâ€ Chemistry Select, (Wiley-VCH) 4, 001 â€“011 (2019). (Impact Factor: 1.716) DOI: doi.org/10.1002/slct.201902167.

â€œNano-CaCO3 embodied poly acrylic acid/dextran nanocomposites for packaging applicationsâ€ Journal of Applied Polymer Science (Wiley), 136, 48298 (2019). DOI: 10.1002/app.48298 (Impact Factor: 1.991).

â€œNanoclay Decorated Polyacrylic acid-starch Hybrid Nanocomposite Thin Films as Packaging Materialsâ€ Polymer Composites (Wiley), 40:229â€“239, (2019). DOI: 10.1002/pc.24326 (Impact Factor: 2.262).

â€œDual Activities of Nano Silver Embedded Reduced Graphene Oxide Using Clove Leaf Extracts: Hg2+ Sensing and Catalytic degradationâ€ Chemistry Select, (Wiley-VCH) 4, 2593â€“2602 (2019). (Impact Factor: 1.716) DOI: 10.1002/slct.201803725.

â€œNano silver imprinted graphene oxide as catalyst in reduction of 4-nitrophenolâ€ Journal of Physical Organic Chemistry (Wiley), (Impact Factor: 1.53) DOI:10.1002/poc.3971 (2019).

â€œNano Silver imprinted polyvinyl alcohol nanocomposites thin films for Hg2+ sensorâ€ Sensor Actuators: B Chemical, (Elsevier) 246, 96-107 (2017) (Impact Factor: 6.393).Doi: 10.1016/jsnb2..

â€œAqueous Compatibility of Starch with Albumin Bovine: An Ultrasonic Studyâ€ J Bionanoscience (American Scientific Publishers) 10 (5), 348-355 (2016) DOI:10.1166/jbns.2016.1397.

â€œControlled Growth of CdS Quantum Dot in an Amphiphilic Diblock Copolymer Poly(2-Vinyl Pyridine)-b-Poly(n-Hexyl Isocyanate) Reversed Micelle Nanoreactorâ€ Journal of Nanoscience and Nanotechnology, 15(9) , 6779( 2015) (Impact Factor-1.354) DOI: 10.1166/jnn.2015.16774

â€œInP/ZnSâ€“graphene oxide and reduced graphene oxide nanocomposites as fascinating materials for potential optoelectronic applicationsâ€ Nanoscale(RSC), 5, 9793 (2013)(Impact factor- 6.895) DOI: 10.1039/c3nr02333h

Sukalyan Dash, Bijay K. Mishra: Oxidation of Styrylpyridinium Dyes by permanganate ion (Bull. Chem. Soc. Jpn. 67, 1994, 673).

Sukalyan Dash, Bijay K. Mishra: Mn(VII) Oxidation using cetyltrimethylammonium permanganate-Self oxidation of CTAP and Oxidation of Benzylalcohol (Int. J. Chem. Kinet.,27(7), 1995,627).

Sukalyan Dash, S. K. Parida, S. Patel, Bijay K. Mishra: Adsorption of organic compounds on silica surfaces (AdvColl Surf Sci, 121, 2006, 77) (18th Hottest article during Oct-Dec, 2006 in all Journals of Sci Dir., and 1st Hottest article in that Journal for two consecutive quarters).

Sukalyan Dash, M. Panigrahi, S. Patel, P. K. Behera, B. K. Mishra: Reversal in solvatochromism in some novel styrylpyridinium dyes having a hydrophobic cleft (Spectrochim. Acta. Part A, 68, 2007, 757).

Sukalyan Dash, S. Mishra, S. Patel, Bijay. K. Mishra: Organically Modified Silica: Synthesis and Applications due to its Surface Interaction with Organic Molecules (Adv. Coll. Interface Sci, 140, 2008, 77-94).

Sukalyan Dash, P. Mukherjee, S. Patel, H. N. Pati, Bijay K. Mishra: Alkylation of Ethanolamines: An Approach to a Novel Class of Functional Surfactants (Synthetic Commn., 39, 2009, 2529-2539).

Sukayan Dash, S. Patel, Bijay. K. Mishra: Oxidation by permanganate: synthetic and mechanistic aspects (Tetrahedron, 69, 2009, 707-739). [Included in Chemistry Global Wikipedia]

Sukalyan Dash, M. Panigrahi, S. Baliarsingh, P. K. Behera, S. Patel, B. K. Mishra: Cyanine dyes - nucleic acids interactions (Curr Org Chem, 15, 2011, 2673-2689).

Sukalyan Dash, M. Panigrahi, S. Patel, B. K. Mishra: Preferential Solvation of Styryl Pyridinium Dyes in Binary Mixtures of Alcohols with Hexane, Dioxane and Dichloromethane (J Phys Chem B, 115, 2011, 99-108).

Sukalyan Dash, P. Mukherjee, S. K. Padhan, S. Patel, P. K. Mohapatra, B. K. Mishra: Effect of temperature on pseudoternary system Tween-80â€“butanolâ€“hexaneâ€“water (J Colloid Interface Sci, 355, 2011, 157-163).

Sukalyan Dash, P. Mukherjee, S. K. Padhan, S. Patel, B. K. Mishra: Clouding behaviour in surfactant systems (Advances in Colloid and Interface Science, 162, 2011, 59-79).

SukalyanDash,P. Mukherjee, S. Sahu, S. K. Padhan, S. Patel, P. Mohapatra, B. K. Mishra: Temperature induced emulsification and demulsification of pseudoternary mixtures of Tween80-butanol-kerosene-water system (Industrial & Engineering Chem. Res. ACS, 2011, Accepted).

Sukalyan Dash, M. Panigrahi, S. Patel, P. K. Behera, B. K. Mishra: 'Synthesis of cyanines: A review (Tetrahedron, 68, 2012, 781-805).

Sukalyan Dash, PS Guru: Eggshell particles (ESP) as potential adsorbent for styrylpyridinium dyes - A Kinetic and thermodynamic Study (J Dispersion Sci Tech, 33, 1012-1020, 2012).

Sukalyan Dash, P. Mukherjee, S. Patel, B. K. Mishra: Self Organized Assemblies of Surfactants Derived from Ethanolamines (J Dispersion Sci Tech, 33, 881-886, 2012).

Sukalyan Dash, PS Guru: Adsorption of some tailor-made styrylpyridinium dyes on sodium dodecylsulphate-treated eggshell particles (SDS-ESP): Impact of dye chain-length and substituent (J Dispersion Sci Tech, 34, 898-904, 2013)

Sukalyan Dash, PS Guru: Amino Acid Modified Eggshell Powder (AA-ESP)â€”A Novel Bio-Solid Scaffold for Adsorption of Some Styrylpyridinium Dyes (J Dispersion Sci Tech, 34, 1099-1112, 2013).

Sukalyan Dash, PS Guru, B Acharya: Tween 80-n-Butanol-Diesel-Water Microemulsion System â€“ A Class of Alternative Diesel Fuel (J Dispersion Sci Tech, 35, 1492-1531, 2014).

Sukalyan Dash, PS Guru: Sorption on Eggshell Waste â€“ A review on ultrastructure, biomineralization and other applications (Adv Colloid Interface Sci, 209,49-67, 2014).

Sukalyan Dash, PS Guru, SaritaTripathy: Solvatochromic behavior of some ï¡-Styrylpyridinium dyes (Spectochem. Acta, 125, 422-430, 2014).

Sukalyan Dash, PS Guru, SP Bank: Î²-CD assisted dissolution of quaternary ammonium permanganatesin aqueous medium (Carbohydrate Polymers, 111, 806-812, 2014).

Sukalyan Dash, PS Guru, SP Bank: UVâ€“Vis spectrophotometric studies of self-oxidation/dissociation of quaternary ammonium permanganates (QAP) â€“ impact of solvent polarity (Spectochem. Acta, 142, 34-42, 2015).

Sukalyan Dash, SaritaTripathy: Solvation studies of some tailor made Î±-N,N-dimethylaminostyryl-N-alkyl pyridinium dyes in binary solvent mixtures containing alcohols, hexane, 1,4-dioxane, DCM and acetone (J Molecular Liquids, 206, 29-38, 2015).

Sukalyan Dash, PS Guru, SP Bank: Green and Efficient: In situ Oxidation kinetics of some tailor-made ï§-styrylpyridinium dyes in aqueous medium using Î²-CD-CTAP complex(Industrial and Engineering Chemistry Research, 54, 9142-9149, 2015).

Sukalyan Dash, PS Guru, B Acharya: Tween-80â€“n-butanol/isobutanolâ€“(Diesel + Kerosene)â€“Water microemulsions â€“ Phase behavior and fuel applications (Fuel, 171, 87-93, 2016).

Sukalyan Dash, PS Guru, S Priyadarshini: Ë‡Î²-CD assisted aqueous dissolution of cetylpicolinium dichromates (CPDC)â€”Evolution of a class of green water compatible lipopathic Cr(VI) oxidants (Carbohydrate Polymers, 171, 122-128, 2017).

M Mishra, I Mukherjee, AK Mall, A Mitra, Sukalyan Dash, S Chatterjee, S Mukherjee, A Roy: â€œTruncated hexagonal bi-pyramidal gallium ferrite nanocrystals: integration of structural details with visible-light photo-activity and self-cleaning Propertiesâ€ (Journal of Materials Chemistry A, DOI: 10.1039/c8ta02749h, 2018).

B. P. Sahoo and S. Panda, Improved grey wolf optimization technique for fuzzy aided PID controller design for power system frequency control, Sustainable Energy, Grids and Networks, vol. 16, pp. 278-299, Dec. 2018.

B. P. Sahoo and S. Panda, Chaotic multi verse optimizer based fuzzy logic controller for frequency control of microgrids, Evol. Intell., pp. 1-22, Jun. 2020.

SarmilaGarnaik, Avinash Kumar, Gayadhar Pradhan, KabirajSethi; An efficient approach for detecting vowel onset & offset points in speech signal; International Journal of Speech Technology, 2020; pp. 643-651.

SarmilaGarnaik,Gayadhar Pradhan, KabirajSethi; An approach for reducing speech induced mismatches to detect key words in childrenâ€™s speech; Multimedia tools and application, 2021

S. Garnaik, N. Srinivas, G. Pradhan; Detection of vowels in continuous speech using variation of short-term magnitude spectra, In IEEE region 10 conference (TENCON), Kochi, Kerla, India, 2019.

A. Kumar, S. Shahnawazuddin, S. Garnaik, I.C. Yadav, G. Pradhan; Detection of vowels in speech signals degraded by speech-like noise; In National Conference on Communiction, IEEE, IIScBenagaluru, 2019.

A. Das, S. Garnaik; Discrete Fourier Transform based vowel onset point detection using spectral peaks energy; In 3rd International Conference on Electronics, Communication &Aerospace Engineering, IEEE, Coimbatore, 2019.

S. Nayak, S. Garnaik, S.K.Nayak, D. Panigrahi, K. Pal; Study of the effect of a patriotic song on autonomic nervous system and heart using ECG signal analysis; In 2ndInternational Conference on Man And Machine Interfacing, IEEE, IIT, Bhubaneswar, 2017,

N. C. Rout, S. Garnaik, K. Sethi; A comparison study of signal processing tools for denoising of Electrocardiogram signal; In International Conference on Innovations in Control, Communication and Information systems, IEEE, Greater Noida, India, 2017.

B. Meher, S. Agrawal, R. Panda, L. Dora, and A. Abraham, Visible and infrared image fusion using an efficient adaptive transition region extraction technique, Engineering Science and Technology an International Journal, 2021.

B. Meher, S. Agrawal, R. Panda, Lingraj Dora, and A. Abraham, A novel regionâ€based multimodal image fusion technique using improved dictionary learning. International Journal of Imaging Systems and Technology, 2019, Article in press.

S. Agrawal, R. Panda, S. Kumari, Lingraj Dora, and A. Abraham, A New Hybrid Multifocus Image Fusion Model Using Single Optimum Gabor, International Information and Engineering Technology Association, Vol. 33 (2), pp. 111 â€“ 118, 2019.

Lingraj Dora, Sanjay Agrawal, Rutuparna Panda and Ajith Abraham, Nested Cross-Validation Based Adaptive Sparse Representation Algorithm and Its Application to Pathological Brain Classification, Expert Systems With Applications, Vol. 114, pp. 313 - 321, 2018.

Lingraj Dora, Sanjay Agrawal, Rutuparna Panda and Ajith Abraham, State of the Arts Methods for Brain Tissue Segmentation: A Review, IEEE Reviews in Biomedical Engineering, Vol. 10, pp. 235 - 249, 2017.

Lingraj Dora, Sanjay Agrawal, Rutuparna Panda and Ajith Abraham, Optimal Breast Cancer Classification Using Gauss-Newton Representation Based Algorithm, Expert Systems With Applications, Vol. 85, pp. 134 - 145, 2017.

Lingraj Dora, Sanjay Agrawal, Rutuparna Panda and Ajith Abraham, An Evolutionary Single Gabor Kernel Based Filter Approach to Face Recognition, Engineering Applications of Artificial Intelligence, Vol. 62, pp. 286 - 301, 2017.

Sanjay Agrawal, Rutuparna Panda and Lingraj Dora, A Study on Fuzzy Clustering for Magnetic Resonance Brain Image Segmentation Using Soft Computing Approaches, Applied Soft Computing, Vol. 24, pp. 522 - 533, 2014.

Pranab Kumar Mishro, Sanjay Agrawal, Lingraj Dora and Rutuparna Panda, A Fuzzy C-Means Clustering Approach to HMRF-EM Model for MRI Brain Tissue Segmentation, In 6th International conference on CERA, IIT Roorkee, India, 2017.

Lingraj Dora and Nurusingha Prasad Rath, Face Recognition by Regularized-LDA Using PRM, In IEEE International Conference on Advances in Recent Technologies in Communication & Computing, Kerala, India, 2010.

A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8

M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023

A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023

A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023

B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018

B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018

B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.

M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014

. K. K. Baral,P. C. Nayak,B. Mohanty,A. K. Barisal, “Improved frequency regulation of dual-area hybrid power system with the in?uence of energy storage devices” ElectricalEngineering https://doi.org/10.1007/s00202-024-02670-8

B. V. S. Acharyulu·Simhadri K.S,·B Mohanty, “Greenan aconda optimized DRN controller for automaticgeneration control of two-area interconnected wind–solar–tidal system” Electrical Engineering https://doi.org/10.1007/s00202-023-02151-4

G. R Biswal, B. Mohanty, “Frequency and voltage stability of multi microgrid system using 2-DOF TIDF FUZZY controller” smart science https://doi.org/10.1080/23080477.2023.2297550

KK Baral, PC Sahu, AK Barisal, B Mohanty, Combined analysis on AGC and ELD of a hybrid power system with D-WCA designed Gaussian type-2 fuzzy controller, Evolving Systems 14 (2), 263-280

K. S. Simhadri, B. Mohanty, and S. K. Panda, “Comparative performance analysis of 2DOF state feedback controller for automatic generation control using whale optimization algorithm,” Optim Control Appl Methods, vol. 40, no. 1, 2019, doi: 10.1002/oca.2462

6. P. R. Sahu, K.S Simhadri, B. Mohanty, P. K. Hota, A. Y Abdelaziz, F. Albalawi, S. SM Ghoneim, M. Elsisi, Effective load frequency control of power system with two-degree freedom tilt-integral-derivative based on whale optimization algorithm, Sustainability 15 (2), 1515

7. R. A. Turky, R. Pugazhendhi, B. Mohanty, R. M. Elavarasan , H. M. Hasanien , E. Devaraj, Parameters Identification of Proton Exchange Membrane Fuel Cell Model Based on the Lightning Search Algorithm, Energies 15 (21), 7893

8. S. Patel, B. Mohanty, and K. S. Simhadri, “Frequency Stability Analysis of Power System Using Competition Over Resources Technique Optimized PIDA Controller,” Iranian Journal of Science and Technology - Transactions of Electrical Engineering, vol. 46, no. 1, 2022, doi: 10.1007/s40998-021-00460-7.

9. P. K. Hota and B. Mohanty, “Overload Alleviation And Determination of Cost of Rescheduling In An Open Acess Power System,” International Journal of Power System Operation and Energy Management, 2012, doi: 10.47893/ijpsoem.2012.1042.

S. Panda, B. Mohanty, and P. K. Hota, “Hybrid BFOA-PSO algorithm for automatic generation control of linear and nonlinear interconnected power systems,” Applied Soft Computing Journal, vol. 13, no. 12, 2013, doi: 10.1016/j.asoc.2013.07.021.

B. V. S. Acharyulu, P. K. Hota, and B. Mohanty, “Automatic generation control of multi-area solar-thermal power system using fruit-fly optimization algorithm,” International Journal of Engineering and Technology(UAE), vol. 7, no. 4, 2018, doi: 10.14419/ijet.v7i4.5.20009.

B. V. S. Acharyulu, B. Mohanty, and P. K. Hota, “Analysis of moth flame optimization optimized cascade proportional-integral-proportional-derivative controller with filter for automatic generation control system incorporating solar thermal power plant,” Optim Control Appl Methods, vol. 41, no. 3, 2020, doi: 10.1002/oca.2582.

B. V. S. Acharyulu, P. K. Hota, and B. Mohanty, “CLSA-MRPID controller for automatic generation control of a three-area hybrid system,” Energy Systems, vol. 11, no. 1, 2020, doi: 10.1007/s12667-018-0305-9.

B. Mohanty, B. V. S. Acharyulu, and P. K. Hota, “Moth-flame optimization algorithm optimized dual-mode controller for multiarea hybrid sources AGC system,” Optim Control Appl Methods, vol. 39, no. 2, 2018, doi: 10.1002/oca.2373

B. Mohanty, “Performance analysis of moth flame optimization algorithm for AGC system,” International Journal of Modelling and Simulation, vol. 39, no. 2, 2019, doi: 10.1080/02286203.2018.1476799

K. S. Simhadri and B. Mohanty, “Performance analysis of dual-mode PI controller using quasi-oppositional whale optimization algorithm for load frequency control,” International Transactions on Electrical Energy Systems, vol. 30, no. 1, 2020, doi: 10.1002/2050-7038.12159.

B. Mohanty and P. K. Hota, “Comparative performance analysis of fruit fly optimisation algorithm for multi-area multisource automatic generation control under deregulated environment,” IET Generation, Transmission and Distribution, vol. 9, no. 14, 2015, doi: 10.1049/iet-gtd.2015.0284.

20. S. Patel, B. Mohanty, and H. M. Hasanien, “Competition over resources optimized fuzzy TIDF controller for frequency stabilization of hybrid micro-grid system,” International Transactions on Electrical Energy Systems, vol. 30, no. 9, 2020, doi: 10.1002/2050-7038.12513.

B. Mohanty, “Hybrid flower pollination and pattern search algorithm optimized sliding mode controller for deregulated AGC system,” J Ambient Intell Humaniz Comput, vol. 11, no. 2, 2020, doi: 10.1007/s12652-019-01348-5.

B. V. S. Acharyulu, B. Mohanty, and P. K. Hota, “Performance analysis of a cascade controller for conventional and deregulated power systems,” International Journal of Modelling and Simulation, vol. 40, no. 4, 2020, doi: 10.1080/02286203.2019.1610690.

B. Mohanty and P. K. Hota, “A hybrid chemical reaction-particle swarm optimisation technique for automatic generation control,” Journal of Electrical Systems and Information Technology, vol. 5, no. 2, 2018, doi: 10.1016/j.jesit.2017.04.001.

P. K. Hota and B. Mohanty, “Automatic generation control of multi source power generation under deregulated environment,” International Journal of Electrical Power and Energy Systems, vol. 75, 2016, doi: 10.1016/j.ijepes.2015.09.003.

K. S. Simhadri, B. Mohanty, and S. K. Panda, “Comparative performance analysis of 2DOF state feedback controller for automatic generation control using whale optimization algorithm,” Optim Control Appl Methods, vol. 40, no. 1, 2019, doi: 10.1002/oca.2462

B. Mohanty and S. Tripathy, “A teaching learning based optimization technique for optimal location and size of DG in distribution network,” Journal of Electrical Systems and Information Technology, vol. 3, no. 1, 2016, doi: 10.1016/j.jesit.2015.11.007.

P.K.Hota, B.Mohanty, Congestion management through differential evolution based optimal rescheduling of generators, The institute of engineers (India), 2012, 53, pp-339-346.

P.K.Hota, B.Mohanty, An auction based dispatch algorithm for deregulated power system, The institute of Engineers(India), 2013, 54, pp-181-188.

P.K.Hota, B.Mohanty, Overload alleviation and determination of cost of rescheduling in an open acess power system, international journal of power system operation and energy management, 2012, 1(3), pp. 25-29.

P. K. Hota & Banaja Mohanty, “Bacterial foraging optimization algorithm based interconnected hydro-thermal AGC system with GRC and TCPS”, Annual Journal of the Odisha Engineers’ Forum, Vertex-2013, Vol. 2, pp 26-32.

A.K.Pradhan, A. Routray ,Banaja Mohanty, Maximum efficiency of flexible AC transmission system, international journal ofÂ electric power and energy system, Elsevier Science , vol. 28 , 2006,pp-581-588.

S.panda, B.Mohanty, P.K.Hota, “Hybrid BFOA-PSO algorithm for automatic generation control of linear and nonlinear interconnected power systems”, Applied Soft Computing , Elsevier Science,Â Vol. 13 (12), 2013,pp 4718-4730.

B Mohanty, S Panda, P K Hota, “Controller parameters tuning of differential evolution algorithm and its application to load frequency control of multi-source power system”, International Journal of ElectricalÂ Power and Energy System, Elsevier Science, Vol. 54, 2014, pp 77-84.

B Mohanty, S Panda, PK.Hota, “Differential evolution algorithm based automatic generation control for interconnected power system with governor dead-band non-linearity” Alexandria ENGG journal, Elsevier Science ,Vol 53(3),2014,pp-537-552.

B.Mohanty, P.K. Hota, “Nonlinear load frequency control of interconnected hydro-thermal system using differential evolution technique” International Journal of Electrical, Computer, Electronics and Communication Engineering (WASET), Vol.8(2), 2014, pp 460-67.

B.Mohanty, P.K.Hota, “Particle Swarm Optimization Based Interconnected Hydro-Thermal AGC System Considering GRC and TCPS” International Journal of Electrical, Computer, Electronics and Communication Engineering (WASET), Vol:8, No:7, 2014.

B.Mohanty, “TLBO optimized sliding mode controller for multi-area multi-source nonlinear interconnected AGC system” Electrical Power and Energy Systems 73 (2015) 872â€“881.

A Small SCADA of Energy Management System Using WBEM. RAMPS -2012, VSSUT, India.

System resource accounting in a Heterogeneous and Distributed Computing environment. International conference IEEE High performance Computing conference 1997, Bangalore, INDIA.

Universal Simplest possible PLC using Personal Computer. IJACSA International journal of Advanced Computer Science and Applications, Vol II, No I, 2011.

Gantayat, Abhisek & Kant, Kamal & Behera, Santi. (2018). Renewable electrical energy sources in northern and southern region of India:-an overview of installation, potential and initiatives. International Journal of Engineering and Technology. 8. 861-863.

International Journals 2 ( Nos. with details of all publications be given) Santi Behera, M. Tripathy, and J. K. Satapathy "Optimal Placement and Sizing of SVC for Load Margin Improvement Using BF Algorithm," World Academy of Science,Engineering and Technology, International Journal of Electrical, Computer, Energetic,Electronic and Communication Engineering, Vol. 8, No.10, pp. 1653-1658, 2014.

Santi Behera, M. Tripathy, and J. K. Satapathy, â€œA novel approach for voltage secure operation using probabilistic Neural Network in Transmission Network, ELSEVIER, Journal of Electrical Systems and Information Technology vol.3. pp. 141-150, 2016.

BK Panigrahi, R. Panda and S. Behera, "Scale frequency analysis of power quality disturbances", Iranian Journal of Electrical and Computer Engineering, Vol. 3, No. 2, Summer-fall 2004, pp.126-131

Dillip Kumar Sahoo, R.K.Sahu, G.T. Chandra Sekhar and S. Panda “A novel modified differential evolution algorithm optimized fuzzy proportional integral derivative controller for load frequency control with thyristor controlled series compensator” Journal of Electrical System and Information Technology (Elsevier),Â (Article in press).

R.K.Sahu, S. Panda, A. Biswal and G.T. Chandra Sekhar (2016) â€œDesign and analysis of tilt integral derivative controller with filter for load frequency control of multi - area interconnected power systemsâ€ ISA Transactions (Elsevier), Vol. 61, pp. 251 - 264. (Impact Factor: 3.394).

R.K.Sahu, S. Panda, U. K. Rout and D K Sahoo (2016) â€œTeaching learning based optimization algorithm for automatic generation control of power system using 2 - DOF PID controllerâ€ International Journal of Electrical Power and Energy Systems (Elsevier), Vol. 77, pp. 287 - 301. (Impact Factor: 3.289).

R.K. Sahu, G.T. Chandra Sekhar and Sidhartha Panda (2016)Â “Automatic generation control of multi - area power systems with diverse energy sources using Teaching Learning Based Optimization algorithm” Engineering Science and Technology: an International Journal (Elsevier), Vol. 19, No.1, pp. 113 - 134.

G.T.Chandra Sekhar, R.K.Sahu and S.PandaÂ â€œFirefly Algorithm Optimized PID Controller for Automatic Generation Control with Redox Flow Batteryâ€ International Journal of Computational Systems Engineering (Inderscience), Vol. 3, Nos. 1/2, pp. 48-57.

P.C.Pradhan, R.K. Sahu and Sidhartha Panda (2016) “Firefly algorithm optimized fuzzy PID controller for AGC of multi area multi source power systems with UPFC and SMES” Engineering Science and Technology: an International Journal (Elsevier), Vol. 19, No.1, pp. 338 - 354.

G.T. Chandra Sekhar, R.K. Sahu, A.K. Baliarsingh and Sidhartha Panda (2016)Â â€œLoad frequency control of power system under deregulated environment using optimal firefly algorithmâ€ International Journal of Electrical Power and Energy Systems (Elsevier), Vol. 74, pp. 195 - 211. (Impact Factor: 3.289).

G.T. Chandra Sekhar, R.K.Sahu and S. Panda (2015) â€œApplication of Firefly Algorithm for AGC Under Deregulated Power Systemâ€ Volume 31 of Â the series Smart Innovation, Systems and Technologies (Springer), Vol.1, pp. 677 - 687. DOI 10.1007/978 - 81 - 322 - 2205 - 7_62

G.T. Chandra Sekhar, R.K.Sahu and S. Panda (2015) “DE Optimized PID Controller with Derivative Filter for AGC of Interconnected Restructured Power System” Volume 411 of the series Advances in Intelligent Systems and Computing (Springer), Vol.2, pp. 395 - 403. DOI 10.1007/978 - 81 - 322 - 2731 - 1_37

R.K.Sahu, S. Panda and Saroj Padhan (2015) â€œA hybrid firefly algorithm and pattern search technique for automatic generation control of multi area power systemsâ€ International Journal of Electrical Power and Energy Systems (Elsevier), Vol. 64, pp.9 - 23. (Impact Factor: 3.289).

R.K.Sahu, S. Panda and G.T. Chandra Sekhar (2015) â€œA novel hybrid PSO - PS optimized fuzzy PI controller for AGC in multi area interconnected power systemsâ€ International Journal of Electrical Power and Energy Systems (Elsevier), Vol. 64, pp. 880 - 893. ((Impact Factor: 3.289).

R.K.Sahu, G.T. Chandra Sekhar and S. Panda (2015) “DE optimized fuzzy PID controller with derivative filter for LFC of multi source power system in deregulated environment” Ain Shams Engineering Journal (Elsevier), Vol. 6, pp. 511 - 530, (Source Normalized Impact per Paper (SNIP): 1.027).

R.K.Sahu S. Panda and Saroj Padhan (2015) â€œA novel hybrid gravitational search and pattern search algorithm for load frequency control of nonlinear power systemâ€ Applied Soft Computing (Elsevier), Vol. 29, pp. 310 - 327. (Impact Factor: 3.541).

R.K.Sahu S. Panda and P.C. Pradhan (2015) â€œDesign and analysis of hybrid firefly algorithm - pattern search based fuzzy PID controller for LFC of multi area power systemsâ€ International Journal of Electrical Power and Energy Systems (Elsevier), Vol. 69, pp. 200â€“212. ((Impact Factor: 3.289).

R.K.Sahu, G.T. Chandra Sekhar and S. Panda (2015) “A hybrid DE - PS algorithm for load frequency control under deregulated power system with UPFC and RFB ” Ain Shams Engineering Journal (Elsevier), Vol. 6, No.3, pp. 893 - 911. (Source Normalized Impact per Paper (SNIP): 1.027).

G.T. Chandra Sekhar, R.K.Sahu and S. Panda (2015) “AGC of a multi - area power system under deregulated environment using redox flow batteries and interline power flow controller” Engineering Science and Technology: an International Journal (Elsevier), Vol. 18,No.4, pp. 555 - 578.

Saroj Padhan, R.K.Sahu and S. Panda (2014) “Automatic generation control with thyristor controlled series compensator including superconducting magnetic energy storage units” Ain Shams Engineering Journal (Elsevier), Vol. 5, pp.759â€“774. (Source Normalized Impact per Paper (SNIP): 1.027).

R.K.Sahu, S. Panda and Saroj Padhan (2014) “Optimal gravitational search algorithm for automatic generation control of interconnected power systems” Ain Shams Engineering Journal (Elsevier), Vol. 5, pp.721â€“733. (Source Normalized Impact per Paper (SNIP): 1.027).

Saroj Padhan, R.K. Sahu and S. Panda (2014) â€œApplication of firefly algorithm for load frequency control of multi area interconnected power systemâ€ Electric Power Components and Systems (Taylor & Francis), Vol. 42, No. 13, pp. 1419â€“1430. (Impact Factor: 1.22).

R.K. Sahu, S. Panda and Saroj Padhan (2014) â€œA novel hybrid DEPS optimized fuzzy PI/PID controller for load frequency control of multi area interconnected power systemsâ€ Journal of Process Control (Elsevier), Vol. 24, No. 10, pp.1596â€“1608. (Impact Factor: 2.700)..

R.K.Sahu, S. Panda, U.K.Rout and P Raul (2013) “Application of Gravitational Search Algorithm for Load Frequency Control of Multi Area Power System” Journal ofBioinformatics and Intelligent Control, Vol.2,No.3, pp.200â€“210.

U.K.Rout, R.K.Sahu and S. Panda (2013) “Design and analysis of differential evolution algorithm based automatic generation control for interconnected power system” Ain Shams Engineering Journal (Elsevier), Vol.4, No.3, pp.409â€“421. (Source Normalized Impact per Paper (SNIP): 1.027).

R. K. Sahu, S.Panda and U.K.Rout (2013) â€œDE optimized parallel 2 - DOF PID controller for load frequency control of power system with governor dead - band nonlinearityâ€ International Journal of Electrical Power and Energy Systems (Elsevier),Vol. 49 , pp.19â€“33. ((Impact Factor: 3.289).

S. Panda and R.K.Sahu (2009) “Modelling, Simulation and Optimal Design of a TCSC - based Controller in a Power System” International Journal Engineering Systems Modelling and Simulation (Inderscience), Vol.01, No.04, pp.222 - 230.

R.Sarathi, R.K.Sahu and M.G.Danikas (2009) â€œUnderstanding the Mechanical Properties of epoxy nanocomposite insulating materials" Journal of Electrical Engineering, Vol.60, No.06, pp. 358 - 361. (Impact Factor: 0.524).

R.Sarathi, R.K.Sahu and T.Tanaka (2008) â€œUnderstanding the hydrophobic characteristics of EpoxyÂ Â Nanocomposites using wavelet and fractal techniqueâ€ IEEE Trans. On Dielectrics and Electrical Insulation, Vol.15, No.01, pp.178 - 186. . (Impact Factor: 2.115).

R.Sarathi, R.K.Sahu and P.Rajesh Kumar (2007) â€œElectrical, Mechanical and Thermal properties of Epoxy Nanocompositesâ€ International Journal of Materials Science and Engineering: A (Elsevier),Â Vol. 445 - 446,Â pp.567 - 578. (Impact Factor: 3.094).

R.Sarathi, P.Rajesh Kumar and R.K.Sahu (2007), â€œAnalysis of Surface Degradation of Epoxy Nanocomposite due to tracking under AC and DC voltagesâ€ Polymer DegradationÂ and Stability(Elsevier), Vol. 92, No.4, pp.560 - 568. (Impact Factor: 3.386)..

R.Sarathi, R.K.Sahu and P.Rajesh Kumar,T.Tanaka (2006), “Understanding the performance of Epoxy Nanocomposites - A Physico - Chemical Approach” IEEJ Trans. on Fundamentals and Materials,Vol.126, No.11, pp.1112 - 1120.

J. Dasmahapatra and S.K. Padhan, Second order duality for mathematical programming involving n-set functions, Bol. Soc. Paran. Mat., 37 (2019) 37-54.

G. V. V. Jagannadha Rao, S. K. Padhan and M. Postolache, Application of Fixed Point Results on Rational F-Contraction Mappings to Solve Boundary Value Problems, Symmetry 11 (2019) 1-20.

S.K. Padhan and C. Nahak, Symmetric duality with generalized invexity in variational problems, Journal of Orissa Mathematical Society, 27 (2008), 81-86.

S.K. Padhan, Duality of variational problems with a new approach, RAIRO- Oper. Res., 52 (2018) 79-93. I.F. 0.55

S.K. Padhan and C. Nahak, Third order duality in nonlinear programming problems, 4OR. A Quarterly Journal of Operations Research, 15 (2017)93-105. I.F. 1.6

S. K. Padhan, G.V.V. Jagannadha Rao, Hemant Kumar Nashine and R. P. Agarwal, Some fixed point results for (Î²-Ïˆ_1-Ïˆ_2)-contractive conditions in ordered b-metric- like spaces, Filomat, 31(14) (2017), 4587-4612. I.F. 0.69

S.K. Padhan and C. Nahak, Higher-order symmetric duality in multiobjective Programming problems under higher-order invexity, Appl. Math. Comput., 5 (2011) 1705-1712. I.F. 1.738

S.K. Padhan and C. Nahak, Second order duality for the variational problems under invexity, Comput. Math. Appl., 60 (2010) 3072-3081. I.F. 1.531

J. Dasmahapatra and S.K. Padhan, Second order duality for mathematical programming involving n-set functions, Bol. Soc. Paran. Mat., 37 (2019) 37- 54

P.K. Behera, S.K. Padhan and R.N. Mohapatra, On variational control problems in Banach Spaces, Panamer. Math. J., 28 (2018) 1-18.

S.K. Padhan, S. Gadtia and B. Bhoi, FPGA based implementation for extracting the roots of real number, Alexandria Engineering Journal, 55 (2017) 2849-2854.

S.K. Padhan, S. Gadtia and A.K. Pattanaik, Remarks on Heronâ€™s cubic root iteration formula, Bol. Soc. Paran. Mat., 35 (2017) 1-8.

A.K. Bhurjee and S.K. Padhan, Optimality conditions and duality results for non-differentiable interval optimization problems, Journal of Applied Mathematics and Computing, 50 (2016) 59-71.

S.K. Padhan and C. Nahak, Higher-order symmetric duality with higher-order generalized invexity, J. Appl. Math. Comput. 36 (2015) 1334-1341.

S.K. Padhan and C. Nahak, Higher-order generalized invexity in variational problems, Math. Meth. Appl. Sci., 36 (11) (2013) 1334-1341. I.F. 1.017

S.K. Padhan and C. Nahak, Second and higher order generalized invexity and duality in mathematical programming, Int. J. Math. Oper. Res. 5(2) (2013), 170-182.

S.K. Padhan, C. Nahak and R.N. Mohapatra, Second and higher order duality in Banach space under invexity, Nonlinear Anal. Hybrid Syst., 5 (2011), 457-466. I.F. 3.963

Manoj Kumar Dash, Santosh Kumar Senapati and Aurovinda Mohanty,"Natural Convection Around Three Horizontal Cylinders in Vertical Array: A Numerical Approach", Journal of Thermophysics and Heat Transfer,https://doi.org/10.2514/1.T6925

Mohanty, Aurovinda, Santosh Kumar Senapati, Viplove Ranjan Ganguly, and Manoj Kumar Dash. “Computation of Natural Convection Heat Transfer from an Infrared Suppression Device (IRS) with Multiple Louvered Cylindrical Funnels.” Numerical Heat Transfer, Part A: Applications, (2024), 1–17. doi:10.1080/10407782.2024.2328763.

Rahul Ray, Aurovinda Mohanty*, Pandab Patro, Santosh Kumar Senapati"Performance improvement of a heat sink with triangular slotted and interrupted fins: A computational study",Applied Thermal Engineering,Volume 230, Part B, 2023,DOI:https://doi.org/10.1016/j.applthermaleng.2023.120783

Aurovinda Mohanty, Santosh Kumar Senapati and Manoj Kumar Dash, â€œCooling Characteristic of an Infrared Suppression Device with Single Perforated Funnel: A Computational Fluid Dynamics Approachâ€, Journal of Thermal Science and Engineering Applications; 2023, Volume 15, issue1, Pages: 1-10.DOI: https://doi.org/10.1115/1.4055263.

Vikrant Chandrakar, Arnab Mukherjee, Jnana Ranjan Senapati and Aurovinda Mohanty, â€œEntropy Generation Study of Turbine Exhaust Gas Through an Infrared Suppression Deviceâ€, Journal of Thermophysics and Heat Transfer, 2021, Pages: 1-12. https://doi.org/10.2514/1.T6411

Rahul Ray, Aurovinda Mohanty*, Pandab Patro and Kartik Tripathy, â€œPerformance enhancement of heat sink with branched and interrupted finsâ€, International Communications in Heat and Mass Transfer, Volume 133,2022, Pages: 1-11. https://doi.org/10.1016/j.icheatmasstransfer.2022.105945

Vikrant Chandrakar, Arnab Mukherjee, Jnana Ranjan Senapati and Aurovinda Mohanty, â€œConjugate free convection with surface radiation from real-scale IRS system with multiple conical funnels: A numerical analysisâ€, International Communications in Heat and Mass Transfer, Volume 134, 2022. https://doi.org/10.1016/j.icheatmasstransfer.2022.106004

Vikrant Chandrakar, Jnana Ranjan Senapati & Aurovinda Mohanty, â€œConjugate heat transfer due to conduction, natural convection, and radiation from a vertical hollow cylinder with finite thickness, Numerical Heat Transfer, Part A: Applications, 2020,Pages: 1-25. https://doi.org/10.1080/10407782.2020.1847524

Ashok K. Barik, Arouvinda Mohanty, Jnana R. Senapati, Mohamed M. Awad, â€œConstructural design of different ribs for thermos-fluid performance enhancement of a solar air heater (SAH)â€, International Journal of Thermal Science, Volume 160, 2020, Pages: 1-14. https://doi.org/10.2514/1.T6411

Ajay Gupta, Gautam, Satyabrata Sahoo, Aurovinda Mohanty, â€œ Perforamance evaluation of porous fin with prescribed tip temperature: An analytical and numerical approachâ€, International Journal of Heat and Mass Transfer, Volume 156, 2020 Pages: 1-16. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119736

Aurovinda mohanty, Santosh Kumar Senapti and Sukanta K. Dash, â€œNatural convection cooling of an Infrared suppression device (IRS) with conical funnels- a computational approachâ€, International Communications in Heat and Mass Transfer, Volume 118, 2020, Pages: 1-13. https://doi.org/10.1016/j.icheatmasstransfer.2020.104891

Ghoshdastidar P S, Kabelac S and Mohanty A, Numerical modeling of atmospheric pool boiling by the coupled map lattice method, Journal of Mechanical Engineering Science, Part C, Feb 2004, Pages195-05,doi:https://doi.org/10.1243/095440604322886946

Mohanty A, Dash S K, Roy S, Natural convection cooling of an infrared suppression (IRS) device with cylindrical funnels, International journal of thermal sciences, Volume 141, July 2019, Pages 103-113,doi:https://doi.org/10.1016/j.ijthermalsci.2019.03.032

A. Jena, S. K. Pattnaik, S. K. Sarangi, The performance of advanced cutting tools used for dry machining of aluminium, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer, 2.2 SCIE, 46 (2024) 441, 10.1007/s40430-024-05025-3

A. Jena, B. B. Palei S. K. Pattnaik, S. K. Sarangi, AFM, Nano-indentation and TEM characterization study of HFCVD diamond on Tantalum and Diamond seeded cemented carbide inserts, Int. J. Refractory Metals and Hard Materials, Elsevier Science, 3.6 SCI 118 (2024) 106503, 10.1016/j.ijrmhm.2023.106503

A. Jena, S. K. Pattnaik, B. B. Palei, S. K. Sarangi Synthesis of diamond crystal growth on tungsten carbide inserts by HFCVD using various seeding powders Applied Physics A, Springer 2.584 SCI 128 (2022) 287 10.1007/s00339-022-05417-z

L. R. Bhandarkar, P. P. Mohanty, S. K. Sarangi Experimental study and multi-objective optimization of process parameters during turning of 100Cr6 using C-type advanced coated tools Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 1.762 SCOPUS 235 (2021) 7634-7654 10.1177/09544062211043144 journals.sagepub.com/home/pic

L. R. Bhandarkar, M. Behera, P. P. Mohanty, S. K. Sarangi Experimental investigation and multi-objective optimization of process parameters during machining of AISI 52100 using high performance coated tools Measurement, Elsevier Science 3.464 SCOPUS 172 (2021) 108842 February 2021 https://doi.org/10.1016/j.measurement.2020.108842

S. K. Pattnaik, M. Behera, S. Padhi, P. R. Dash, S. K. Sarangi Study of cutting force and tool wear during turning of aluminium with WC, PCD and HFCVD coated MCD tool Manufacturing Review, EDP Sciences 1.44 SCOPUS 7 (2020) 27 August 2020 https://doi.org/10.1051/mfreview/2020026

M. Behera, A. Jena, S. K. Pattnaik, S. Padhi, S. K. Sarangi The effect of transition-metal seeding powder on deposition and growth of diamond synthesized by hot filament chemical vapor deposition processes on cemented carbide substrates and its characterization Materials Chemistry and Physics, Elsevier Science 3.47 SCOPUS 256 (2020) 123638 August 2020 10.1016/j.matchemphys.2020.123638

D. K. Sahu, S. K. Sarangi, K. U. Sri Influence of substrate bias on performance of diamond coating on WC cutting inserts for machining of aluminium by HFCVD process International Journal of Materials Engineering Innovation, Inderscience SCOPUS 11 Issue 4 (2020) 293-308 https://dx.doi.org/10.1504/IJMATEI.2020.112096

S. Padhi, M. Behera, S. K. Pattnaik, S. K. Sarangi Diamond Thin Film Coating on WC Substrate by HFCVD Method using Different Seeding Powders and Its Characterization International Journal of Recent Technology and Engineering SCOPUS 8 Issue-2 (2019) 5175-5180 10.35940/ijrte.B3169.078219

R. Kumar, S. K. Pattnaik, J. K. Minz, S. Padhi, S. K. Sarangi Influence of cutting parameters on cutting forces and surface roughness in dry turning of Al. using PCD and different coated tools Sadhana, Academic of Sciences, Springer 0.592 44 (2019) 186 10.1007/s12046-019-1155-4Sadhana(0123456789().,-volV)F]T(30123456789().,-volV)

S. K. Pattanik, N. K. Bhoi, S. Padhi, S. K. Sarangi Dry machining of aluminium for proper selection of cutting tool: tool performance and tool wear The International Journal of Advanced Manufacturing Technology, Springer 1.568 98 (2018) 55 10.1007/s00170-017-0307-0

P. R. Dash, K. Ray, S. K. Sarangi, P. K. Pradhan Analysis of Static Instability of an Asymmetric, Rotating Sandwich-Beam Advances in Acoustics and Vibration Open Access 2012 (2012) 191042 10.1155/2012/191042

S. K. Sarangi, A. Chattopadhyay, A.K. Chattopadhyay Influence of process parameters on crystal growth of diamond on cemented carbide substrates by HFCVD system Int. J. Refractory Metals and Hard Materials, Elsevier Science 1.989 31 (2012) 1 10.1016/j.ijrmhm.2011.07.007

A. K. Chattopadhyay, P. Roy, S. K. Sarangi Study of wettability test of pure aluminum against uncoated and coated carbide inserts Surface and Coatings Technology, Elsevier Science 2.135 204 (2009) 410 10.1016/j.surfcoat.2009.07.038

P. Roy, S. K. Sarangi, A. Ghosh, A.K. Chattopadhyay Machinability study of pure aluminium and Al-12% Silicon alloys against uncoated and coated carbide inserts Int. J. Refractory Metals and Hard Materials, Elsevier Science 1.989 27 (2009) 535 10.1016/j.ijrmhm.2008.04.008

A. K. Chattopadhyay, P. Roy, A. Ghosh, S. K. Sarangi Wettability and machinability study of pure aluminum towards uncoated and coated carbide cutting tool inserts Surface and Coatings Technology, Elsevier Science 2.135 203 (2009) 94110.1016/j.surfcoat.2008.08.047

A. Chattopadhyay, S. K. Sarangi, A. K. Chattopadhyay Effect of negative dc substrate bias on morphology and adhesion of diamond coating synthesised on carbide turning tools by modified HFCVD method Applied Surface Science, Elsevier Science 2.711 255 (2008) 1661 10.1016/j.apsusc.2008.04.065

S. K. Sarangi, A. Chattopadhyay, A. K. Chattopadhyay Effect of pretreatment, seeding and interlayer on nucleation and growth of HFCVD diamond films on cemented carbide tools Int. J. Refractory Metals and Hard Materials, Elsevier Science 1.989 26 (2008) 220 10.1016/j.ijrmhm.2007.05.002

S. K. Sarangi, A. Chattopadhyay, A. K. Chattopadhyay Effect of pretreatment methods and chamber pressure on morphology, quality and adhesion of HFCVD diamond coating on cemented carbide inserts Applied Surface Science, Elsevier Science 2.711 254 (2008) 3721 10.1016/j.apsusc.2007.10.104

Rana J., Mishra P.K and Prasad B.V.S.S.S., "A Transient Three Dimensional Thermal Model for Laser Heat Treatment of Finite Size Work piecesâ€™â€™ Journal of Materials Processing and Manufacturing Science, Vol-5, April, 1997, pp 283-293.

Rana J., Prasad B.V.S.S.S and Mishra P.K., "Case Hardening of Laser Treated Steel Specimen Using Energy Integral Method". Journal of Materials Processing and Manufacturing Science, Vol-6, Jan, 1998, pp229-238.

Rana J., Goswami G.L., Jha S.K., Mishra P.K. and Prasad B. V.S.S.S. "Experimental studies on the microstructure and hardness of laser-treated steel specimens". Journal of Optics and Laser Technology, Vol- 39, 2007, pp 385-393.

Rana J., Suar S. and Bhoi R.K., "Optimization of Process Parameters in Laser Drilling Using Taguchi Technique", International Journal of Manufacturing Technology and Research, Vol-4, No. 1-2, Jan- June 2008, pp. 77-78.

Rana J., Prasad B.V.S.S.S. and Mishra P.K., "Optimization of Process parameters for CO2 Laser transformation hardening", Published in International Journal of Manufacturing Technology and Research, Vol. 4, No. 3-4, July- Dec, 2008, pp. 75-81.

Rana J. and Pradhan P., "Optimization of Process Parameters for Ductile and Brittle materials in Surface Grinding", Published in the International Journal for Manufacturing Technology and Research, Vol. 5, No. 1-2, Jan-July, 2009, pp. 74-80.

Pradhan P., Rana J and Mishra C., "Effect of hardening on fatigue life of C-40 steelâ€™â€™ Strength, Fracture and Complexity, Vol. 7, 2011, pp. 273-283.

Satapathy B.B., Rana J. and Maity K.P., "Effect of Process Parameters in Laser Drilling", International Journal of Applied Engineering Research, Vol-6, No.18,2011, pp. 2258-2262.

Satapathy B.B., Rana J, Maity K.P. and Biswal S., "Optimization of Process Parameter in Laser Percussion Drilling". International Journal of Creative Mathematical Science and Technology. Vol. 17, No.25, 2012, pp. 17-25.

Satapathy B.B., Rana J. and Maity K.P., "Quality Optimization of microhole in Laser Drilling" IOSR Journal of Engineering, Mar-2012, Vo. 2(3), pp. 382-388.

Satapathy B.B., Rana J., Maity K.P. and Biswal S. "Experimental Study in the process parameters in Laser Percussion Drilling". International Journal of Scientific and Engineering Research Vol. 4, Issue-5, May-2013, pp. 36-39.

Mohanty U.K. and Rana J., "Parametric Optimization of EDM process using Weighted signal to noise Ratio". International Journal of Material Sciences and Manufacturing Engineering, April 2015 Vol. 42, Issue- I, pp. 1187-1193.

I Nayak and J Rana., "Selection of a Suitable Multi-response Optimization Technique for Turning Operation", Decision Science Letter-5, July 2015,pp 129-142.

B.B. Satapathy ,J.Rana and K.P.Maity,"Numerical prediction of hole profile in laser drilling process and experimental validation",International Journal of Advanced Manufacturing Technology,Published online on 28th Oct.-2016.

I Nayak, J Rana and A.Parida., "Performance Optimization in Electro Discharge Machining using a suitable multi-response optimization techinque", Published online on 9th Dec.-2016 in Decision Science Letter (Volume-6-2017,pp 283-294).

Padhy, R.L., Parida, S.P., Mishra, D., Jena Pankaj Charan,. Study of damage progression due to impact of solid bodies on laminated composite plates in water. Int J Interact Des Manuf (2024). https://doi.org/10.1007/s12008-024-02128-y

Sarada Prasad Parida, Pankaj Charan Jena*, Sudhansu Ranjan Das , Ali Basem, Ajit Kumar Khatua and Ammar H Elsheikh, Transverse vibration of laminated composite-plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory, Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science, 2024, https://doi.org/DOI: 10.1177/09544062241256589

Sarada Prasad Parida, Pankaj Charan Jena*, Mukul Swain, Krushna Prasad Shadangi*, Fabrication of Geopolymer Composites using Egg-Shell and Fly-ash: Comparison between the Strength and Stability, Physio-Chemical and Mechanical Properties, Process Safety and Environmental Protection 187 (2024) 1140–1149, https://doi.org/10.1016/j.psep.2024.05.020

Sarada Prasad Parida, Debashish Mishra, Rajiv Lochan Padhy, Pankaj Charan Jena,* Sudhansu Ranjan Das, Ali A. Basem, Debabrata Dhupal and Ammar Elsheikh, Effect of Alkali Treatment on Mechanical and Buckling Behaviour of Natural Fiber Reinforced Composite Cylinder, ES Materials and Manufacturing, 24, 1161, 1-11, 2024, https://dx.doi.org/10.30919/esmm1161

Sarada Prasad Parida, Saritprava Sahoo, Pankaj Charan Jena, Prediction of multiple transverse cracks in a composite beam using hybrid RNN-mPSO technique, Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science, 2024, https://doi.org/DOI: 10.1177/09544062241239415

Saritprava Sahoo,Sarada Prasad Parida, Pankaj Charan Jena, Dynamic response of a laminated hybrid composite cantilever beam with multiple cracks & moving mass, Structural Engineering and Mechanics,87(6),529-540, 2023,https://doi.org/10.12989/sem.2023.87.6.529 SCOPUS SCI-IF: 2.2

Debabrata Dhupal, Debasish Panigrahi, Sweta Rout, Rajesh Kumar Bhuyan, Soumyaranjan Nayak, Pankaj Charan Jena, and Sudhansu Ranjan Das, Generation of Effusion Holes on Ultra-high Temperature Alloy by Micro Electro-discharge Machining Process, Surface Review and Letters, 2023, https://doi.org/10.1142/S0218625X2450015X , SCOPUS SCI-IF: 1.1

Saritprava Sahoo, Pankaj Charan Jena, Effect of lamina orientation, crack severity, and fillers on dynamic parameters of hybrid composite cantilever beam with double transverse cracks, Materialwissenschaft und Werkstofftechnik,Vol.54(4), Pages: 737-750, DOI: 10.1002/mawe.202200205, SCOPUS, SCI-IF: 1.034

Sarada Prasad Parida, Pankaj Charan Jena, Dynamics of laminated-composite-plates with selective layer-wise fillering rested on elastic foundation using higher-order layer-wise theory Journal of Vibration and Control, 2022,https://doi.org/10.1177/10775463221138353, SCOPUS, SCI-IF: 2.8

Sarada Prasad Parida, Pankaj Charan Jena, Multi-fillers GFRP laminated composite plates: Fabrication & Properties, Indian Journal of Engineering and Materials Sciences, Vol. December 2022,pp. 815-823 DOI: 10.56042/ijems.v29i6.70296 SCOPUS, SCI-IF: 0.615

Sarada Prasad Parida, Pankaj Charan Jena, Multi-fillers GFRP laminated composite plates: Fabrication & Properties, Indian Journal of Engineering and Materials Sciences, in Press, December 2022, SCOPUS, SCI-IF: 0.88

Sarada Prasad Parida, Pankaj Charan Jena, Dynamics of laminated-composite-plates with selective layer-wise fillering rested on elastic foundation using higher-order layer-wise theory Journal of Vibration and Control, Journal of Vibration and Control, 2022, DOI: 10.1177/10775463221138353, SCOPUS, SCI-IF: 3.095

Sitesh Mahapatra, Anshuman Das, Pankaj Charan Jena and Sudhansu Ranjan Das, Turning of hardened AISI H13 steel with recently developed S3P-AlTiSiN coated carbide tool using MWCNT mixed nanofluid under minimum quantity lubrication Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science, 2022, https://doi.org/10.1177/09544062221126357 SCOPUS, SCI-IF: 1.762

Sarada Prasad Parida, Pankaj Charan Jena, Selective layer-by-layer fillering and its effect on the dynamic response of laminated composite plates using higher-order theory, Journal of Vibration and Control, 2022. https://doi.org/10.1177%2F10775463221081180, SCOPUS, SCI-IF: 3.095

Sarada Prasad Parida, Pankaj Charan Jena, Free and forced vibration analysis of flyash/graphene filled laminated composite plates using higher order shear deformation theory, Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science, 2022, https://doi.org/10.1177%2F09544062211053181 SCOPUS, SCI-IF: 1.762

Saritprava Sahoo, Pankaj Charan Jena, Preparation and Characterization of Hybrid Laminated Composite Beams, Advances in Materials and Processing Technologies, 2021, DOI:10.1080/2374068X.2021.1953924 SCOPUS, ESCI.

Sarada Prasad Parida, Pankaj Charan Jena, Comparative Stress analysis of different suitable Biomaterials for Artificial Hip Joint and Femur Bone using Finite Element Simulation, Advances in Materials and Processing Technologies, 2021, DOI:10.1080/2374068X.2021.1949541 SCOPUS, ESCI.

Subhadip Pradhan, Sudhansu Ranjan Das, Pankaj Charan Jena, Debabrata Dhupal Investigations on Surface Integrity in Hard Turning of Functionally Graded Specimen under Nano Fluid Assisted Minimum Quantity Lubrication, Advances in Materials and Processing Technologies, 2021, DOI:10.1080/2374068X.2021.1948706 SCOPUS, ESCI.

Saurav Kumar Bhatt, Pankaj Charan Jena, Anish Pandey, Dayal R. Parhi, Design and Analysis of a Novel Concept-Based Six-Wheels Rocker-Bogie Robot, Journal of Huazhong University of Science and Technology, Vol.50(4), 1-20, 2021 SCOPUS

Pradhan, S., Das, S.R., Jena, P.C., Dhupal, D., Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach, Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science 0(0) 1â€“27, 2021, DOI: 10.1177/09544062211010199 SCOPUS, SCI-IF: 1.762.

Pradhan, S., Das, S.R., Nanda, B.K., Jena, P.C., Dhupal, D., Experimental investigation on machining of hardstone quartz with modified AJM using hot silicon carbide abrasives, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol.42, No.11, 559, 2020, SCIE-IF: 2.220.

Pradhan, S., Das, S.R., Nanda, B.K., Jena, P.C., Dhupal, D.,Machining of Hard stone Quartz With Modified AJM Process using Hot SiC Abrasives: Analysis, Modeling, Optimization, and Cost Analysis, Surface Review And Letters, 2020, 2050049 SCIE-IF: 1.152.

Sarada Prasad Parida, Pankaj Charan Jena*, â€œAdvances of Shear Deformation Theory for Analyzing the Dynamics of Laminated Composite Plates: An Overviewâ€, Mechanics of Composite Materials, Vol. 56, No. 4, 455â€“484, 2020. SCIE-IF: 1.33.

Sarmila Singh, Sarada Prasad Parida, Premananda Ekka, Pankaj Charan Jena*, â€œCharacterization of Fabricated FG Pipe with Natural Fiber-Flyash-Epoxy using Centrifugal Castingâ€, International Journal of Innovative Technology and Exploring Engineering, Volume-8(11), PP., 2019, DOI: 10.35940/ijitee.J9831.0881019, SCOPUS.

Pankaj Charan Jena, Dayal R. Parhi and G. Pohit, â€œDynamic Investigation of FRP Cracked Beam Using Neural Network Techniqueâ€, Journal of Vibration Engineering & Technologies ,ISSN-2321-3558, Volume 7, 2019; 7: 647â€“661. DOI: 10.1007/s42417-019-00158-5. SCIE-IF: 1.889.

Sarada Prasad Parida, Pankaj Charan Jena, â€œDesign and Finite Element analysis of Thick walled Laminated Composite Pressure Vesselâ€, International Journal of Innovative Technology and Exploring Engineering, Volume-8 (10), PP.4389-4394, 2019, DOI: 10.35940/ijitee.J9831.0881019, ISSN: 2278-3075. SCOPUS.

Sarada P. Parida, Pankaj Charan Jena, R. R. Dash,, â€œDynamic analysis of laminated composite beam using Timoshenko beam Theoryâ€,International Journal of Engineering and Advanced Technology, Volume-8 Issue-6, PP.190-196, 2019, ISSN: 2249 â€“ 8958., DOI: 10.35940/ijeat.E7159.088619. SCOPUS.

Sarada Prasad Parida, Saritprava Sahoo, Basna Bidisha Bal, Pankaj Charan Jena, â€œBuckling analysis of Functionally Graded Natural Fiber-Flyash-Epoxy (FGNFFE) Cylinderâ€, International Journal of Engineering and Advanced Technology ISSN: 2249 â€“ 8958,Volume-8 (6), PP.4260-4265, 2019, DOI: 10.35940/ijeat.F9118.088619. SCOPUS.

Pranav Kumar Saraswat, SaritpravaSahoo, Sarada Prasad Parida, Pankaj Charan Jena, â€œFabrication, Characterization and Drilling Operation of Natural Fiber Reinforced Hybrid Composite With Filler (Fly-Ash/Graphene)â€, International Journal of Innovative Technology and Exploring Engineering, ISSN: 2278-3075, Volume-8 (10), PP.1653-1659, 2019, DOI: 10.35940/ijitee.J1253.0881019, SCOPUS.

Pankaj Charan Jena, â€œMechanical Properties of Fabricated CFRP with Fillerâ€, International Journal of Engineering and Advanced Technology ISSN: 2249â€“8958, Volume-8 (6), PP.1886-1892, 2019, DOI: 10.35940/ijeat.E7166.088619. SCOPUS.

S. Kayal, RabindraBehera, Pankaj Charan Jena, â€œSolidifying behavior and Characterization of Al (LM6) +SICP Metal Matrix Compositesâ€, International Journal of Engineering and Advanced Technology ISSN: 2249 â€“ 8958, Volume-8 (6), PP.2397-2403, 2019.DOI: 10.35940/ijeat.F8527.088619, SCOPUS.

Pankaj Charan Jena, Dayal R. Parhi and G. Pohit, â€œFault Measurement in Composite Structure by Fuzzy-Neuro Hybrid Technique from the Natural Frequency and Fibre Orientationâ€, Journal of Vibration Engineering & Technologies, Vol. 5(2), PP.124-36, 2017, DOI: 10.1007/s42417-019-00158-5, SCOPUS, SCIE-IF:1.889

Pankaj Charan Jena, Dayal R. Parhi and G. Pohit, â€œDynamic Study of Composite Cracked Beam by Changing the Angle of Bidirectional Fibresâ€, Iranian Journal of Science and Technology, Transactions A: Science, Vol.40(1):PP.27-37, 2016, DOI 10.1007/s40995-016-0006-yISSN 1028-6276. SCOPUS, SCIE-IF:1.194

Pankaj Charan Jena, Dayal R. Parhi and G. Pohit, â€œTheoretical, Numerical (FEM) and Experimental Analysis of composite cracked beams of different boundary conditions using vibration mode shape curvaturesâ€, International Journal of Engineering and Technology, ISSN : 0975-4024, Vol. 6 No 2, PP.509-518, 2014.SCOPUS

Pankaj Charan Jena, N.Biswal, and R. P.Mohanty, An art of review on dynamic Behavior of sic particulate reinforced polymer composite Beams, International Journal of Engineering Sciences & Research Technology, Vol.5.3, 30-33, 2016.

Pankaj Charan Jena, N.Biswal, and R. P.Mohanty, Dynamic behavior of SiC particulate reinforced polymer composite beam, International Journal of Multidisciplinary Research and Development, Volume 3; Issue 4; 117-124, 2016.

Shakti P.Jena, Dayal R.Parhi, and Pankaj Charan Jena, Dynamic Response of Damaged Cantilever Beam Subjected to Traversing Mass, International Journal for Technological Research In Engineering (IJTRE) 2(7), 860-865, 2015.

Pankaj Charan Jena, Dayal R. Parhi, and G. Pohit,Faults Recognition of a Single Cracked Beam with Analytical and Experimental Methods by using Vibration Signatures. International Journal of Applied Artificial Intelligence in Engineering System, 6(1), 63-76, 2014.

Pankaj Charan Jena, Dayal R. Parhi, and G. Pohit, A Review on Various Techniques and Methodologies Applied to the Study on Faults Detection of Cracked Composite and Non-composite Beam, International Journal of Artificial Intelligence and Computational Research, 6 .1, 69-75, 2014.

Pankaj Charan Jena, Dayal R. Parhi, and G. Pohit,Faults detection of a single cracked beam by theoretical and experimental analysis using vibration signatures, Journal of Mechanical and Civil Engineering, 4.3,1-18, 2012.

Pankaj Charan Jena, Dayal R. Parhi, and G. Pohit,Study about of Faults Detection of a Single Cracked Beam Through Various Techniques, International Journal of Applied Artificial Intelligence in Engineering System, 4.1, 51-58, 2012.

Padhy, R.L., Parida, S.P., Mishra, D., Jena Pankaj Charan,. Study of damage progression due to impact of solid bodies on laminated composite plates in water. Int J Interact Des Manuf (2024). https://doi.org/10.1007/s12008-024-02128-y

Sarada Prasad Parida, Pankaj Charan Jena*, Sudhansu Ranjan Das , Ali Basem, Ajit Kumar Khatua and Ammar H Elsheikh, Transverse vibration of laminated composite-plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory, Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science, 2024, https://doi.org/DOI: 10.1177/09544062241256589

Sarada Prasad Parida, Pankaj Charan Jena*, Mukul Swain, Krushna Prasad Shadangi*, Fabrication of Geopolymer Composites using Egg-Shell and Fly-ash: Comparison between the Strength and Stability, Physio-Chemical and Mechanical Properties, Process Safety and Environmental Protection 187 (2024) 1140–1149, https://doi.org/10.1016/j.psep.2024.05.020

Sarada Prasad Parida, Debashish Mishra, Rajiv Lochan Padhy, Pankaj Charan Jena,* Sudhansu Ranjan Das, Ali A. Basem, Debabrata Dhupal and Ammar Elsheikh, Effect of Alkali Treatment on Mechanical and Buckling Behaviour of Natural Fiber Reinforced Composite Cylinder, ES Materials and Manufacturing, 24, 1161, 1-11, 2024, https://dx.doi.org/10.30919/esmm1161

Sarada Prasad Parida, Saritprava Sahoo, Pankaj Charan Jena, Prediction of multiple transverse cracks in a composite beam using hybrid RNN-mPSO technique, Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science, 2024, https://doi.org/DOI: 10.1177/09544062241239415

Saritprava Sahoo,Sarada Prasad Parida, Pankaj Charan Jena, Dynamic response of a laminated hybrid composite cantilever beam with multiple cracks & moving mass, Structural Engineering and Mechanics,87(6),529-540, 2023,https://doi.org/10.12989/sem.2023.87.6.529 SCOPUS SCI-IF: 2.2

Debabrata Dhupal, Debasish Panigrahi, Sweta Rout, Rajesh Kumar Bhuyan, Soumyaranjan Nayak, Pankaj Charan Jena, and Sudhansu Ranjan Das, Generation of Effusion Holes on Ultra-high Temperature Alloy by Micro Electro-discharge Machining Process, Surface Review and Letters, 2023, https://doi.org/10.1142/S0218625X2450015X , SCOPUS SCI-IF: 1.1

Saritprava Sahoo, Pankaj Charan Jena, Effect of lamina orientation, crack severity, and fillers on dynamic parameters of hybrid composite cantilever beam with double transverse cracks, Materialwissenschaft und Werkstofftechnik,Vol.54(4), Pages: 737-750, DOI: 10.1002/mawe.202200205, SCOPUS, SCI-IF: 1.034

Sarada Prasad Parida, Pankaj Charan Jena, Dynamics of laminated-composite-plates with selective layer-wise fillering rested on elastic foundation using higher-order layer-wise theory Journal of Vibration and Control, 2022,https://doi.org/10.1177/10775463221138353, SCOPUS, SCI-IF: 2.8

Sarada Prasad Parida, Pankaj Charan Jena, Multi-fillers GFRP laminated composite plates: Fabrication & Properties, Indian Journal of Engineering and Materials Sciences, Vol. December 2022,pp. 815-823 DOI: 10.56042/ijems.v29i6.70296 SCOPUS, SCI-IF: 0.615

Sarada Prasad Parida, Pankaj Charan Jena, Multi-fillers GFRP laminated composite plates: Fabrication & Properties, Indian Journal of Engineering and Materials Sciences, in Press, December 2022, SCOPUS, SCI-IF: 0.88

Sarada Prasad Parida, Pankaj Charan Jena, Dynamics of laminated-composite-plates with selective layer-wise fillering rested on elastic foundation using higher-order layer-wise theory Journal of Vibration and Control, Journal of Vibration and Control, 2022, DOI: 10.1177/10775463221138353, SCOPUS, SCI-IF: 3.095

Sitesh Mahapatra, Anshuman Das, Pankaj Charan Jena and Sudhansu Ranjan Das, Turning of hardened AISI H13 steel with recently developed S3P-AlTiSiN coated carbide tool using MWCNT mixed nanofluid under minimum quantity lubrication Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science, 2022, https://doi.org/10.1177/09544062221126357 SCOPUS, SCI-IF: 1.762

Sarada Prasad Parida, Pankaj Charan Jena, Selective layer-by-layer fillering and its effect on the dynamic response of laminated composite plates using higher-order theory, Journal of Vibration and Control, 2022. https://doi.org/10.1177%2F10775463221081180, SCOPUS, SCI-IF: 3.095

Sarada Prasad Parida, Pankaj Charan Jena, Free and forced vibration analysis of flyash/graphene filled laminated composite plates using higher order shear deformation theory, Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science, 2022, https://doi.org/10.1177%2F09544062211053181 SCOPUS, SCI-IF: 1.762

Saritprava Sahoo, Pankaj Charan Jena, Preparation and Characterization of Hybrid Laminated Composite Beams, Advances in Materials and Processing Technologies, 2021, DOI:10.1080/2374068X.2021.1953924 SCOPUS, ESCI.

Sarada Prasad Parida, Pankaj Charan Jena, Comparative Stress analysis of different suitable Biomaterials for Artificial Hip Joint and Femur Bone using Finite Element Simulation, Advances in Materials and Processing Technologies, 2021, DOI:10.1080/2374068X.2021.1949541 SCOPUS, ESCI.

Subhadip Pradhan, Sudhansu Ranjan Das, Pankaj Charan Jena, Debabrata Dhupal Investigations on Surface Integrity in Hard Turning of Functionally Graded Specimen under Nano Fluid Assisted Minimum Quantity Lubrication, Advances in Materials and Processing Technologies, 2021, DOI:10.1080/2374068X.2021.1948706 SCOPUS, ESCI.

Saurav Kumar Bhatt, Pankaj Charan Jena, Anish Pandey, Dayal R. Parhi, Design and Analysis of a Novel Concept-Based Six-Wheels Rocker-Bogie Robot, Journal of Huazhong University of Science and Technology, Vol.50(4), 1-20, 2021 SCOPUS

Pradhan, S., Das, S.R., Jena, P.C., Dhupal, D., Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach, Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science 0(0) 1â€“27, 2021, DOI: 10.1177/09544062211010199 SCOPUS, SCI-IF: 1.762.

Pradhan, S., Das, S.R., Nanda, B.K., Jena, P.C., Dhupal, D., Experimental investigation on machining of hardstone quartz with modified AJM using hot silicon carbide abrasives, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol.42, No.11, 559, 2020, SCIE-IF: 2.220.

Pradhan, S., Das, S.R., Nanda, B.K., Jena, P.C., Dhupal, D.,Machining of Hard stone Quartz With Modified AJM Process using Hot SiC Abrasives: Analysis, Modeling, Optimization, and Cost Analysis, Surface Review And Letters, 2020, 2050049 SCIE-IF: 1.152.

Sarada Prasad Parida, Pankaj Charan Jena*, â€œAdvances of Shear Deformation Theory for Analyzing the Dynamics of Laminated Composite Plates: An Overviewâ€, Mechanics of Composite Materials, Vol. 56, No. 4, 455â€“484, 2020. SCIE-IF: 1.33.

Sarmila Singh, Sarada Prasad Parida, Premananda Ekka, Pankaj Charan Jena*, â€œCharacterization of Fabricated FG Pipe with Natural Fiber-Flyash-Epoxy using Centrifugal Castingâ€, International Journal of Innovative Technology and Exploring Engineering, Volume-8(11), PP., 2019, DOI: 10.35940/ijitee.J9831.0881019, SCOPUS.

Pankaj Charan Jena, Dayal R. Parhi and G. Pohit, â€œDynamic Investigation of FRP Cracked Beam Using Neural Network Techniqueâ€, Journal of Vibration Engineering & Technologies ,ISSN-2321-3558, Volume 7, 2019; 7: 647â€“661. DOI: 10.1007/s42417-019-00158-5. SCIE-IF: 1.889.

Sarada Prasad Parida, Pankaj Charan Jena, â€œDesign and Finite Element analysis of Thick walled Laminated Composite Pressure Vesselâ€, International Journal of Innovative Technology and Exploring Engineering, Volume-8 (10), PP.4389-4394, 2019, DOI: 10.35940/ijitee.J9831.0881019, ISSN: 2278-3075. SCOPUS.

Sarada P. Parida, Pankaj Charan Jena, R. R. Dash,, â€œDynamic analysis of laminated composite beam using Timoshenko beam Theoryâ€,International Journal of Engineering and Advanced Technology, Volume-8 Issue-6, PP.190-196, 2019, ISSN: 2249 â€“ 8958., DOI: 10.35940/ijeat.E7159.088619. SCOPUS.

Sarada Prasad Parida, Saritprava Sahoo, Basna Bidisha Bal, Pankaj Charan Jena, â€œBuckling analysis of Functionally Graded Natural Fiber-Flyash-Epoxy (FGNFFE) Cylinderâ€, International Journal of Engineering and Advanced Technology ISSN: 2249 â€“ 8958,Volume-8 (6), PP.4260-4265, 2019, DOI: 10.35940/ijeat.F9118.088619. SCOPUS.

Pranav Kumar Saraswat, SaritpravaSahoo, Sarada Prasad Parida, Pankaj Charan Jena, â€œFabrication, Characterization and Drilling Operation of Natural Fiber Reinforced Hybrid Composite With Filler (Fly-Ash/Graphene)â€, International Journal of Innovative Technology and Exploring Engineering, ISSN: 2278-3075, Volume-8 (10), PP.1653-1659, 2019, DOI: 10.35940/ijitee.J1253.0881019, SCOPUS.

Pankaj Charan Jena, â€œMechanical Properties of Fabricated CFRP with Fillerâ€, International Journal of Engineering and Advanced Technology ISSN: 2249â€“8958, Volume-8 (6), PP.1886-1892, 2019, DOI: 10.35940/ijeat.E7166.088619. SCOPUS.

S. Kayal, RabindraBehera, Pankaj Charan Jena, â€œSolidifying behavior and Characterization of Al (LM6) +SICP Metal Matrix Compositesâ€, International Journal of Engineering and Advanced Technology ISSN: 2249 â€“ 8958, Volume-8 (6), PP.2397-2403, 2019.DOI: 10.35940/ijeat.F8527.088619, SCOPUS.

Pankaj Charan Jena, Dayal R. Parhi and G. Pohit, â€œFault Measurement in Composite Structure by Fuzzy-Neuro Hybrid Technique from the Natural Frequency and Fibre Orientationâ€, Journal of Vibration Engineering & Technologies, Vol. 5(2), PP.124-36, 2017, DOI: 10.1007/s42417-019-00158-5, SCOPUS, SCIE-IF:1.889

Pankaj Charan Jena, Dayal R. Parhi and G. Pohit, â€œDynamic Study of Composite Cracked Beam by Changing the Angle of Bidirectional Fibresâ€, Iranian Journal of Science and Technology, Transactions A: Science, Vol.40(1):PP.27-37, 2016, DOI 10.1007/s40995-016-0006-yISSN 1028-6276. SCOPUS, SCIE-IF:1.194

Pankaj Charan Jena, Dayal R. Parhi and G. Pohit, â€œTheoretical, Numerical (FEM) and Experimental Analysis of composite cracked beams of different boundary conditions using vibration mode shape curvaturesâ€, International Journal of Engineering and Technology, ISSN : 0975-4024, Vol. 6 No 2, PP.509-518, 2014.SCOPUS

Pankaj Charan Jena, N.Biswal, and R. P.Mohanty, An art of review on dynamic Behavior of sic particulate reinforced polymer composite Beams, International Journal of Engineering Sciences & Research Technology, Vol.5.3, 30-33, 2016.

Pankaj Charan Jena, N.Biswal, and R. P.Mohanty, Dynamic behavior of SiC particulate reinforced polymer composite beam, International Journal of Multidisciplinary Research and Development, Volume 3; Issue 4; 117-124, 2016.

Shakti P.Jena, Dayal R.Parhi, and Pankaj Charan Jena, Dynamic Response of Damaged Cantilever Beam Subjected to Traversing Mass, International Journal for Technological Research In Engineering (IJTRE) 2(7), 860-865, 2015.

Pankaj Charan Jena, Dayal R. Parhi, and G. Pohit,Faults Recognition of a Single Cracked Beam with Analytical and Experimental Methods by using Vibration Signatures. International Journal of Applied Artificial Intelligence in Engineering System, 6(1), 63-76, 2014.

Pankaj Charan Jena, Dayal R. Parhi, and G. Pohit, A Review on Various Techniques and Methodologies Applied to the Study on Faults Detection of Cracked Composite and Non-composite Beam, International Journal of Artificial Intelligence and Computational Research, 6 .1, 69-75, 2014.

Pankaj Charan Jena, Dayal R. Parhi, and G. Pohit,Faults detection of a single cracked beam by theoretical and experimental analysis using vibration signatures, Journal of Mechanical and Civil Engineering, 4.3,1-18, 2012.

Pankaj Charan Jena, Dayal R. Parhi, and G. Pohit,Study about of Faults Detection of a Single Cracked Beam Through Various Techniques, International Journal of Applied Artificial Intelligence in Engineering System, 4.1, 51-58, 2012.

Padhy, R.L., Parida, S.P., Mishra, D., Jena Pankaj Charan,. Study of damage progression due to impact of solid bodies on laminated composite plates in water. Int J Interact Des Manuf (2024). https://doi.org/10.1007/s12008-024-02128-y

Sarada Prasad Parida, Pankaj Charan Jena*, Sudhansu Ranjan Das , Ali Basem, Ajit Kumar Khatua and Ammar H Elsheikh, Transverse vibration of laminated composite-plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory, Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science, 2024, https://doi.org/DOI: 10.1177/09544062241256589

Sarada Prasad Parida, Pankaj Charan Jena*, Mukul Swain, Krushna Prasad Shadangi*, Fabrication of Geopolymer Composites using Egg-Shell and Fly-ash: Comparison between the Strength and Stability, Physio-Chemical and Mechanical Properties, Process Safety and Environmental Protection 187 (2024) 1140–1149, https://doi.org/10.1016/j.psep.2024.05.020

Sarada Prasad Parida, Debashish Mishra, Rajiv Lochan Padhy, Pankaj Charan Jena,* Sudhansu Ranjan Das, Ali A. Basem, Debabrata Dhupal and Ammar Elsheikh, Effect of Alkali Treatment on Mechanical and Buckling Behaviour of Natural Fiber Reinforced Composite Cylinder, ES Materials and Manufacturing, 24, 1161, 1-11, 2024, https://dx.doi.org/10.30919/esmm1161

Sarada Prasad Parida, Saritprava Sahoo, Pankaj Charan Jena, Prediction of multiple transverse cracks in a composite beam using hybrid RNN-mPSO technique, Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science, 2024, https://doi.org/DOI: 10.1177/09544062241239415

Saritprava Sahoo,Sarada Prasad Parida, Pankaj Charan Jena, Dynamic response of a laminated hybrid composite cantilever beam with multiple cracks & moving mass, Structural Engineering and Mechanics,87(6),529-540, 2023,https://doi.org/10.12989/sem.2023.87.6.529 SCOPUS SCI-IF: 2.2

Debabrata Dhupal, Debasish Panigrahi, Sweta Rout, Rajesh Kumar Bhuyan, Soumyaranjan Nayak, Pankaj Charan Jena, and Sudhansu Ranjan Das, Generation of Effusion Holes on Ultra-high Temperature Alloy by Micro Electro-discharge Machining Process, Surface Review and Letters, 2023, https://doi.org/10.1142/S0218625X2450015X , SCOPUS SCI-IF: 1.1

Saritprava Sahoo, Pankaj Charan Jena, Effect of lamina orientation, crack severity, and fillers on dynamic parameters of hybrid composite cantilever beam with double transverse cracks, Materialwissenschaft und Werkstofftechnik,Vol.54(4), Pages: 737-750, DOI: 10.1002/mawe.202200205, SCOPUS, SCI-IF: 1.034

Sarada Prasad Parida, Pankaj Charan Jena, Dynamics of laminated-composite-plates with selective layer-wise fillering rested on elastic foundation using higher-order layer-wise theory Journal of Vibration and Control, 2022,https://doi.org/10.1177/10775463221138353, SCOPUS, SCI-IF: 2.8

Sarada Prasad Parida, Pankaj Charan Jena, Multi-fillers GFRP laminated composite plates: Fabrication & Properties, Indian Journal of Engineering and Materials Sciences, Vol. December 2022,pp. 815-823 DOI: 10.56042/ijems.v29i6.70296 SCOPUS, SCI-IF: 0.615

Sarada Prasad Parida, Pankaj Charan Jena, Multi-fillers GFRP laminated composite plates: Fabrication & Properties, Indian Journal of Engineering and Materials Sciences, in Press, December 2022, SCOPUS, SCI-IF: 0.88

Sarada Prasad Parida, Pankaj Charan Jena, Dynamics of laminated-composite-plates with selective layer-wise fillering rested on elastic foundation using higher-order layer-wise theory Journal of Vibration and Control, Journal of Vibration and Control, 2022, DOI: 10.1177/10775463221138353, SCOPUS, SCI-IF: 3.095

Sitesh Mahapatra, Anshuman Das, Pankaj Charan Jena and Sudhansu Ranjan Das, Turning of hardened AISI H13 steel with recently developed S3P-AlTiSiN coated carbide tool using MWCNT mixed nanofluid under minimum quantity lubrication Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science, 2022, https://doi.org/10.1177/09544062221126357 SCOPUS, SCI-IF: 1.762

Sarada Prasad Parida, Pankaj Charan Jena, Selective layer-by-layer fillering and its effect on the dynamic response of laminated composite plates using higher-order theory, Journal of Vibration and Control, 2022. https://doi.org/10.1177%2F10775463221081180, SCOPUS, SCI-IF: 3.095

Sarada Prasad Parida, Pankaj Charan Jena, Free and forced vibration analysis of flyash/graphene filled laminated composite plates using higher order shear deformation theory, Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science, 2022, https://doi.org/10.1177%2F09544062211053181 SCOPUS, SCI-IF: 1.762

Saritprava Sahoo, Pankaj Charan Jena, Preparation and Characterization of Hybrid Laminated Composite Beams, Advances in Materials and Processing Technologies, 2021, DOI:10.1080/2374068X.2021.1953924 SCOPUS, ESCI.

Sarada Prasad Parida, Pankaj Charan Jena, Comparative Stress analysis of different suitable Biomaterials for Artificial Hip Joint and Femur Bone using Finite Element Simulation, Advances in Materials and Processing Technologies, 2021, DOI:10.1080/2374068X.2021.1949541 SCOPUS, ESCI.

Subhadip Pradhan, Sudhansu Ranjan Das, Pankaj Charan Jena, Debabrata Dhupal Investigations on Surface Integrity in Hard Turning of Functionally Graded Specimen under Nano Fluid Assisted Minimum Quantity Lubrication, Advances in Materials and Processing Technologies, 2021, DOI:10.1080/2374068X.2021.1948706 SCOPUS, ESCI.

Saurav Kumar Bhatt, Pankaj Charan Jena, Anish Pandey, Dayal R. Parhi, Design and Analysis of a Novel Concept-Based Six-Wheels Rocker-Bogie Robot, Journal of Huazhong University of Science and Technology, Vol.50(4), 1-20, 2021 SCOPUS

Pradhan, S., Das, S.R., Jena, P.C., Dhupal, D., Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach, Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science 0(0) 1â€“27, 2021, DOI: 10.1177/09544062211010199 SCOPUS, SCI-IF: 1.762.

Pradhan, S., Das, S.R., Nanda, B.K., Jena, P.C., Dhupal, D., Experimental investigation on machining of hardstone quartz with modified AJM using hot silicon carbide abrasives, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol.42, No.11, 559, 2020, SCIE-IF: 2.220.

Pradhan, S., Das, S.R., Nanda, B.K., Jena, P.C., Dhupal, D.,Machining of Hard stone Quartz With Modified AJM Process using Hot SiC Abrasives: Analysis, Modeling, Optimization, and Cost Analysis, Surface Review And Letters, 2020, 2050049 SCIE-IF: 1.152.

Sarada Prasad Parida, Pankaj Charan Jena*, â€œAdvances of Shear Deformation Theory for Analyzing the Dynamics of Laminated Composite Plates: An Overviewâ€, Mechanics of Composite Materials, Vol. 56, No. 4, 455â€“484, 2020. SCIE-IF: 1.33.

Sarmila Singh, Sarada Prasad Parida, Premananda Ekka, Pankaj Charan Jena*, â€œCharacterization of Fabricated FG Pipe with Natural Fiber-Flyash-Epoxy using Centrifugal Castingâ€, International Journal of Innovative Technology and Exploring Engineering, Volume-8(11), PP., 2019, DOI: 10.35940/ijitee.J9831.0881019, SCOPUS.

Pankaj Charan Jena, Dayal R. Parhi and G. Pohit, â€œDynamic Investigation of FRP Cracked Beam Using Neural Network Techniqueâ€, Journal of Vibration Engineering & Technologies ,ISSN-2321-3558, Volume 7, 2019; 7: 647â€“661. DOI: 10.1007/s42417-019-00158-5. SCIE-IF: 1.889.

Sarada Prasad Parida, Pankaj Charan Jena, â€œDesign and Finite Element analysis of Thick walled Laminated Composite Pressure Vesselâ€, International Journal of Innovative Technology and Exploring Engineering, Volume-8 (10), PP.4389-4394, 2019, DOI: 10.35940/ijitee.J9831.0881019, ISSN: 2278-3075. SCOPUS.

Sarada P. Parida, Pankaj Charan Jena, R. R. Dash,, â€œDynamic analysis of laminated composite beam using Timoshenko beam Theoryâ€,International Journal of Engineering and Advanced Technology, Volume-8 Issue-6, PP.190-196, 2019, ISSN: 2249 â€“ 8958., DOI: 10.35940/ijeat.E7159.088619. SCOPUS.

Sarada Prasad Parida, Saritprava Sahoo, Basna Bidisha Bal, Pankaj Charan Jena, â€œBuckling analysis of Functionally Graded Natural Fiber-Flyash-Epoxy (FGNFFE) Cylinderâ€, International Journal of Engineering and Advanced Technology ISSN: 2249 â€“ 8958,Volume-8 (6), PP.4260-4265, 2019, DOI: 10.35940/ijeat.F9118.088619. SCOPUS.

Pranav Kumar Saraswat, SaritpravaSahoo, Sarada Prasad Parida, Pankaj Charan Jena, â€œFabrication, Characterization and Drilling Operation of Natural Fiber Reinforced Hybrid Composite With Filler (Fly-Ash/Graphene)â€, International Journal of Innovative Technology and Exploring Engineering, ISSN: 2278-3075, Volume-8 (10), PP.1653-1659, 2019, DOI: 10.35940/ijitee.J1253.0881019, SCOPUS.

Pankaj Charan Jena, â€œMechanical Properties of Fabricated CFRP with Fillerâ€, International Journal of Engineering and Advanced Technology ISSN: 2249â€“8958, Volume-8 (6), PP.1886-1892, 2019, DOI: 10.35940/ijeat.E7166.088619. SCOPUS.

S. Kayal, RabindraBehera, Pankaj Charan Jena, â€œSolidifying behavior and Characterization of Al (LM6) +SICP Metal Matrix Compositesâ€, International Journal of Engineering and Advanced Technology ISSN: 2249 â€“ 8958, Volume-8 (6), PP.2397-2403, 2019.DOI: 10.35940/ijeat.F8527.088619, SCOPUS.

Pankaj Charan Jena, Dayal R. Parhi and G. Pohit, â€œFault Measurement in Composite Structure by Fuzzy-Neuro Hybrid Technique from the Natural Frequency and Fibre Orientationâ€, Journal of Vibration Engineering & Technologies, Vol. 5(2), PP.124-36, 2017, DOI: 10.1007/s42417-019-00158-5, SCOPUS, SCIE-IF:1.889

Pankaj Charan Jena, Dayal R. Parhi and G. Pohit, â€œDynamic Study of Composite Cracked Beam by Changing the Angle of Bidirectional Fibresâ€, Iranian Journal of Science and Technology, Transactions A: Science, Vol.40(1):PP.27-37, 2016, DOI 10.1007/s40995-016-0006-yISSN 1028-6276. SCOPUS, SCIE-IF:1.194

Pankaj Charan Jena, Dayal R. Parhi and G. Pohit, â€œTheoretical, Numerical (FEM) and Experimental Analysis of composite cracked beams of different boundary conditions using vibration mode shape curvaturesâ€, International Journal of Engineering and Technology, ISSN : 0975-4024, Vol. 6 No 2, PP.509-518, 2014.SCOPUS

Pankaj Charan Jena, N.Biswal, and R. P.Mohanty, An art of review on dynamic Behavior of sic particulate reinforced polymer composite Beams, International Journal of Engineering Sciences & Research Technology, Vol.5.3, 30-33, 2016.

Pankaj Charan Jena, N.Biswal, and R. P.Mohanty, Dynamic behavior of SiC particulate reinforced polymer composite beam, International Journal of Multidisciplinary Research and Development, Volume 3; Issue 4; 117-124, 2016.

Shakti P.Jena, Dayal R.Parhi, and Pankaj Charan Jena, Dynamic Response of Damaged Cantilever Beam Subjected to Traversing Mass, International Journal for Technological Research In Engineering (IJTRE) 2(7), 860-865, 2015.

Pankaj Charan Jena, Dayal R. Parhi, and G. Pohit,Faults Recognition of a Single Cracked Beam with Analytical and Experimental Methods by using Vibration Signatures. International Journal of Applied Artificial Intelligence in Engineering System, 6(1), 63-76, 2014.

Pankaj Charan Jena, Dayal R. Parhi, and G. Pohit, A Review on Various Techniques and Methodologies Applied to the Study on Faults Detection of Cracked Composite and Non-composite Beam, International Journal of Artificial Intelligence and Computational Research, 6 .1, 69-75, 2014.

Pankaj Charan Jena, Dayal R. Parhi, and G. Pohit,Faults detection of a single cracked beam by theoretical and experimental analysis using vibration signatures, Journal of Mechanical and Civil Engineering, 4.3,1-18, 2012.

Pankaj Charan Jena, Dayal R. Parhi, and G. Pohit,Study about of Faults Detection of a Single Cracked Beam Through Various Techniques, International Journal of Applied Artificial Intelligence in Engineering System, 4.1, 51-58, 2012.

Padhy, R.L., Parida, S.P., Mishra, D., Jena Pankaj Charan,. Study of damage progression due to impact of solid bodies on laminated composite plates in water. Int J Interact Des Manuf (2024). https://doi.org/10.1007/s12008-024-02128-y

Sarada Prasad Parida, Pankaj Charan Jena*, Sudhansu Ranjan Das , Ali Basem, Ajit Kumar Khatua and Ammar H Elsheikh, Transverse vibration of laminated composite-plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory, Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science, 2024, https://doi.org/DOI: 10.1177/09544062241256589

Sarada Prasad Parida, Pankaj Charan Jena*, Mukul Swain, Krushna Prasad Shadangi*, Fabrication of Geopolymer Composites using Egg-Shell and Fly-ash: Comparison between the Strength and Stability, Physio-Chemical and Mechanical Properties, Process Safety and Environmental Protection 187 (2024) 1140–1149, https://doi.org/10.1016/j.psep.2024.05.020

Sarada Prasad Parida, Debashish Mishra, Rajiv Lochan Padhy, Pankaj Charan Jena,* Sudhansu Ranjan Das, Ali A. Basem, Debabrata Dhupal and Ammar Elsheikh, Effect of Alkali Treatment on Mechanical and Buckling Behaviour of Natural Fiber Reinforced Composite Cylinder, ES Materials and Manufacturing, 24, 1161, 1-11, 2024, https://dx.doi.org/10.30919/esmm1161

Sarada Prasad Parida, Saritprava Sahoo, Pankaj Charan Jena, Prediction of multiple transverse cracks in a composite beam using hybrid RNN-mPSO technique, Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science, 2024, https://doi.org/DOI: 10.1177/09544062241239415

Saritprava Sahoo,Sarada Prasad Parida, Pankaj Charan Jena, Dynamic response of a laminated hybrid composite cantilever beam with multiple cracks & moving mass, Structural Engineering and Mechanics,87(6),529-540, 2023,https://doi.org/10.12989/sem.2023.87.6.529 SCOPUS SCI-IF: 2.2

Debabrata Dhupal, Debasish Panigrahi, Sweta Rout, Rajesh Kumar Bhuyan, Soumyaranjan Nayak, Pankaj Charan Jena, and Sudhansu Ranjan Das, Generation of Effusion Holes on Ultra-high Temperature Alloy by Micro Electro-discharge Machining Process, Surface Review and Letters, 2023, https://doi.org/10.1142/S0218625X2450015X , SCOPUS SCI-IF: 1.1

Saritprava Sahoo, Pankaj Charan Jena, Effect of lamina orientation, crack severity, and fillers on dynamic parameters of hybrid composite cantilever beam with double transverse cracks, Materialwissenschaft und Werkstofftechnik,Vol.54(4), Pages: 737-750, DOI: 10.1002/mawe.202200205, SCOPUS, SCI-IF: 1.034

Sarada Prasad Parida, Pankaj Charan Jena, Dynamics of laminated-composite-plates with selective layer-wise fillering rested on elastic foundation using higher-order layer-wise theory Journal of Vibration and Control, 2022,https://doi.org/10.1177/10775463221138353, SCOPUS, SCI-IF: 2.8

Sarada Prasad Parida, Pankaj Charan Jena, Multi-fillers GFRP laminated composite plates: Fabrication & Properties, Indian Journal of Engineering and Materials Sciences, Vol. December 2022,pp. 815-823 DOI: 10.56042/ijems.v29i6.70296 SCOPUS, SCI-IF: 0.615

Sarada Prasad Parida, Pankaj Charan Jena, Multi-fillers GFRP laminated composite plates: Fabrication & Properties, Indian Journal of Engineering and Materials Sciences, in Press, December 2022, SCOPUS, SCI-IF: 0.88

Sarada Prasad Parida, Pankaj Charan Jena, Dynamics of laminated-composite-plates with selective layer-wise fillering rested on elastic foundation using higher-order layer-wise theory Journal of Vibration and Control, Journal of Vibration and Control, 2022, DOI: 10.1177/10775463221138353, SCOPUS, SCI-IF: 3.095

Sitesh Mahapatra, Anshuman Das, Pankaj Charan Jena and Sudhansu Ranjan Das, Turning of hardened AISI H13 steel with recently developed S3P-AlTiSiN coated carbide tool using MWCNT mixed nanofluid under minimum quantity lubrication Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science, 2022, https://doi.org/10.1177/09544062221126357 SCOPUS, SCI-IF: 1.762

Sarada Prasad Parida, Pankaj Charan Jena, Selective layer-by-layer fillering and its effect on the dynamic response of laminated composite plates using higher-order theory, Journal of Vibration and Control, 2022. https://doi.org/10.1177%2F10775463221081180, SCOPUS, SCI-IF: 3.095

Sarada Prasad Parida, Pankaj Charan Jena, Free and forced vibration analysis of flyash/graphene filled laminated composite plates using higher order shear deformation theory, Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science, 2022, https://doi.org/10.1177%2F09544062211053181 SCOPUS, SCI-IF: 1.762

Saritprava Sahoo, Pankaj Charan Jena, Preparation and Characterization of Hybrid Laminated Composite Beams, Advances in Materials and Processing Technologies, 2021, DOI:10.1080/2374068X.2021.1953924 SCOPUS, ESCI.

Sarada Prasad Parida, Pankaj Charan Jena, Comparative Stress analysis of different suitable Biomaterials for Artificial Hip Joint and Femur Bone using Finite Element Simulation, Advances in Materials and Processing Technologies, 2021, DOI:10.1080/2374068X.2021.1949541 SCOPUS, ESCI.

Subhadip Pradhan, Sudhansu Ranjan Das, Pankaj Charan Jena, Debabrata Dhupal Investigations on Surface Integrity in Hard Turning of Functionally Graded Specimen under Nano Fluid Assisted Minimum Quantity Lubrication, Advances in Materials and Processing Technologies, 2021, DOI:10.1080/2374068X.2021.1948706 SCOPUS, ESCI.

Saurav Kumar Bhatt, Pankaj Charan Jena, Anish Pandey, Dayal R. Parhi, Design and Analysis of a Novel Concept-Based Six-Wheels Rocker-Bogie Robot, Journal of Huazhong University of Science and Technology, Vol.50(4), 1-20, 2021 SCOPUS

Pradhan, S., Das, S.R., Jena, P.C., Dhupal, D., Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach, Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science 0(0) 1â€“27, 2021, DOI: 10.1177/09544062211010199 SCOPUS, SCI-IF: 1.762.

Pradhan, S., Das, S.R., Nanda, B.K., Jena, P.C., Dhupal, D., Experimental investigation on machining of hardstone quartz with modified AJM using hot silicon carbide abrasives, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol.42, No.11, 559, 2020, SCIE-IF: 2.220.

Pradhan, S., Das, S.R., Nanda, B.K., Jena, P.C., Dhupal, D.,Machining of Hard stone Quartz With Modified AJM Process using Hot SiC Abrasives: Analysis, Modeling, Optimization, and Cost Analysis, Surface Review And Letters, 2020, 2050049 SCIE-IF: 1.152.

Sarada Prasad Parida, Pankaj Charan Jena*, â€œAdvances of Shear Deformation Theory for Analyzing the Dynamics of Laminated Composite Plates: An Overviewâ€, Mechanics of Composite Materials, Vol. 56, No. 4, 455â€“484, 2020. SCIE-IF: 1.33.

Sarmila Singh, Sarada Prasad Parida, Premananda Ekka, Pankaj Charan Jena*, â€œCharacterization of Fabricated FG Pipe with Natural Fiber-Flyash-Epoxy using Centrifugal Castingâ€, International Journal of Innovative Technology and Exploring Engineering, Volume-8(11), PP., 2019, DOI: 10.35940/ijitee.J9831.0881019, SCOPUS.

Pankaj Charan Jena, Dayal R. Parhi and G. Pohit, â€œDynamic Investigation of FRP Cracked Beam Using Neural Network Techniqueâ€, Journal of Vibration Engineering & Technologies ,ISSN-2321-3558, Volume 7, 2019; 7: 647â€“661. DOI: 10.1007/s42417-019-00158-5. SCIE-IF: 1.889.

Sarada Prasad Parida, Pankaj Charan Jena, â€œDesign and Finite Element analysis of Thick walled Laminated Composite Pressure Vesselâ€, International Journal of Innovative Technology and Exploring Engineering, Volume-8 (10), PP.4389-4394, 2019, DOI: 10.35940/ijitee.J9831.0881019, ISSN: 2278-3075. SCOPUS.

Sarada P. Parida, Pankaj Charan Jena, R. R. Dash,, â€œDynamic analysis of laminated composite beam using Timoshenko beam Theoryâ€,International Journal of Engineering and Advanced Technology, Volume-8 Issue-6, PP.190-196, 2019, ISSN: 2249 â€“ 8958., DOI: 10.35940/ijeat.E7159.088619. SCOPUS.

Sarada Prasad Parida, Saritprava Sahoo, Basna Bidisha Bal, Pankaj Charan Jena, â€œBuckling analysis of Functionally Graded Natural Fiber-Flyash-Epoxy (FGNFFE) Cylinderâ€, International Journal of Engineering and Advanced Technology ISSN: 2249 â€“ 8958,Volume-8 (6), PP.4260-4265, 2019, DOI: 10.35940/ijeat.F9118.088619. SCOPUS.

Pranav Kumar Saraswat, SaritpravaSahoo, Sarada Prasad Parida, Pankaj Charan Jena, â€œFabrication, Characterization and Drilling Operation of Natural Fiber Reinforced Hybrid Composite With Filler (Fly-Ash/Graphene)â€, International Journal of Innovative Technology and Exploring Engineering, ISSN: 2278-3075, Volume-8 (10), PP.1653-1659, 2019, DOI: 10.35940/ijitee.J1253.0881019, SCOPUS.

Pankaj Charan Jena, â€œMechanical Properties of Fabricated CFRP with Fillerâ€, International Journal of Engineering and Advanced Technology ISSN: 2249â€“8958, Volume-8 (6), PP.1886-1892, 2019, DOI: 10.35940/ijeat.E7166.088619. SCOPUS.

S. Kayal, RabindraBehera, Pankaj Charan Jena, â€œSolidifying behavior and Characterization of Al (LM6) +SICP Metal Matrix Compositesâ€, International Journal of Engineering and Advanced Technology ISSN: 2249 â€“ 8958, Volume-8 (6), PP.2397-2403, 2019.DOI: 10.35940/ijeat.F8527.088619, SCOPUS.

Pankaj Charan Jena, Dayal R. Parhi and G. Pohit, â€œFault Measurement in Composite Structure by Fuzzy-Neuro Hybrid Technique from the Natural Frequency and Fibre Orientationâ€, Journal of Vibration Engineering & Technologies, Vol. 5(2), PP.124-36, 2017, DOI: 10.1007/s42417-019-00158-5, SCOPUS, SCIE-IF:1.889

Pankaj Charan Jena, Dayal R. Parhi and G. Pohit, â€œDynamic Study of Composite Cracked Beam by Changing the Angle of Bidirectional Fibresâ€, Iranian Journal of Science and Technology, Transactions A: Science, Vol.40(1):PP.27-37, 2016, DOI 10.1007/s40995-016-0006-yISSN 1028-6276. SCOPUS, SCIE-IF:1.194

Pankaj Charan Jena, Dayal R. Parhi and G. Pohit, â€œTheoretical, Numerical (FEM) and Experimental Analysis of composite cracked beams of different boundary conditions using vibration mode shape curvaturesâ€, International Journal of Engineering and Technology, ISSN : 0975-4024, Vol. 6 No 2, PP.509-518, 2014.SCOPUS

Pankaj Charan Jena, N.Biswal, and R. P.Mohanty, An art of review on dynamic Behavior of sic particulate reinforced polymer composite Beams, International Journal of Engineering Sciences & Research Technology, Vol.5.3, 30-33, 2016.

Pankaj Charan Jena, N.Biswal, and R. P.Mohanty, Dynamic behavior of SiC particulate reinforced polymer composite beam, International Journal of Multidisciplinary Research and Development, Volume 3; Issue 4; 117-124, 2016.

Shakti P.Jena, Dayal R.Parhi, and Pankaj Charan Jena, Dynamic Response of Damaged Cantilever Beam Subjected to Traversing Mass, International Journal for Technological Research In Engineering (IJTRE) 2(7), 860-865, 2015.

Pankaj Charan Jena, Dayal R. Parhi, and G. Pohit,Faults Recognition of a Single Cracked Beam with Analytical and Experimental Methods by using Vibration Signatures. International Journal of Applied Artificial Intelligence in Engineering System, 6(1), 63-76, 2014.

Pankaj Charan Jena, Dayal R. Parhi, and G. Pohit, A Review on Various Techniques and Methodologies Applied to the Study on Faults Detection of Cracked Composite and Non-composite Beam, International Journal of Artificial Intelligence and Computational Research, 6 .1, 69-75, 2014.

Pankaj Charan Jena, Dayal R. Parhi, and G. Pohit,Faults detection of a single cracked beam by theoretical and experimental analysis using vibration signatures, Journal of Mechanical and Civil Engineering, 4.3,1-18, 2012.

Pankaj Charan Jena, Dayal R. Parhi, and G. Pohit,Study about of Faults Detection of a Single Cracked Beam Through Various Techniques, International Journal of Applied Artificial Intelligence in Engineering System, 4.1, 51-58, 2012.

Padhy, R.L., Parida, S.P., Mishra, D., Jena Pankaj Charan,. Study of damage progression due to impact of solid bodies on laminated composite plates in water. Int J Interact Des Manuf (2024). https://doi.org/10.1007/s12008-024-02128-y

Sarada Prasad Parida, Pankaj Charan Jena*, Sudhansu Ranjan Das , Ali Basem, Ajit Kumar Khatua and Ammar H Elsheikh, Transverse vibration of laminated composite-plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory, Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science, 2024, https://doi.org/DOI: 10.1177/09544062241256589

Sarada Prasad Parida, Pankaj Charan Jena*, Mukul Swain, Krushna Prasad Shadangi*, Fabrication of Geopolymer Composites using Egg-Shell and Fly-ash: Comparison between the Strength and Stability, Physio-Chemical and Mechanical Properties, Process Safety and Environmental Protection 187 (2024) 1140–1149, https://doi.org/10.1016/j.psep.2024.05.020

Sarada Prasad Parida, Debashish Mishra, Rajiv Lochan Padhy, Pankaj Charan Jena,* Sudhansu Ranjan Das, Ali A. Basem, Debabrata Dhupal and Ammar Elsheikh, Effect of Alkali Treatment on Mechanical and Buckling Behaviour of Natural Fiber Reinforced Composite Cylinder, ES Materials and Manufacturing, 24, 1161, 1-11, 2024, https://dx.doi.org/10.30919/esmm1161

Sarada Prasad Parida, Saritprava Sahoo, Pankaj Charan Jena, Prediction of multiple transverse cracks in a composite beam using hybrid RNN-mPSO technique, Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science, 2024, https://doi.org/DOI: 10.1177/09544062241239415

Saritprava Sahoo,Sarada Prasad Parida, Pankaj Charan Jena, Dynamic response of a laminated hybrid composite cantilever beam with multiple cracks & moving mass, Structural Engineering and Mechanics,87(6),529-540, 2023,https://doi.org/10.12989/sem.2023.87.6.529 SCOPUS SCI-IF: 2.2

Debabrata Dhupal, Debasish Panigrahi, Sweta Rout, Rajesh Kumar Bhuyan, Soumyaranjan Nayak, Pankaj Charan Jena, and Sudhansu Ranjan Das, Generation of Effusion Holes on Ultra-high Temperature Alloy by Micro Electro-discharge Machining Process, Surface Review and Letters, 2023, https://doi.org/10.1142/S0218625X2450015X , SCOPUS SCI-IF: 1.1

Saritprava Sahoo, Pankaj Charan Jena, Effect of lamina orientation, crack severity, and fillers on dynamic parameters of hybrid composite cantilever beam with double transverse cracks, Materialwissenschaft und Werkstofftechnik,Vol.54(4), Pages: 737-750, DOI: 10.1002/mawe.202200205, SCOPUS, SCI-IF: 1.034

Sarada Prasad Parida, Pankaj Charan Jena, Dynamics of laminated-composite-plates with selective layer-wise fillering rested on elastic foundation using higher-order layer-wise theory Journal of Vibration and Control, 2022,https://doi.org/10.1177/10775463221138353, SCOPUS, SCI-IF: 2.8

Sarada Prasad Parida, Pankaj Charan Jena, Multi-fillers GFRP laminated composite plates: Fabrication & Properties, Indian Journal of Engineering and Materials Sciences, Vol. December 2022,pp. 815-823 DOI: 10.56042/ijems.v29i6.70296 SCOPUS, SCI-IF: 0.615

Sarada Prasad Parida, Pankaj Charan Jena, Multi-fillers GFRP laminated composite plates: Fabrication & Properties, Indian Journal of Engineering and Materials Sciences, in Press, December 2022, SCOPUS, SCI-IF: 0.88

Sarada Prasad Parida, Pankaj Charan Jena, Dynamics of laminated-composite-plates with selective layer-wise fillering rested on elastic foundation using higher-order layer-wise theory Journal of Vibration and Control, Journal of Vibration and Control, 2022, DOI: 10.1177/10775463221138353, SCOPUS, SCI-IF: 3.095

Sitesh Mahapatra, Anshuman Das, Pankaj Charan Jena and Sudhansu Ranjan Das, Turning of hardened AISI H13 steel with recently developed S3P-AlTiSiN coated carbide tool using MWCNT mixed nanofluid under minimum quantity lubrication Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science, 2022, https://doi.org/10.1177/09544062221126357 SCOPUS, SCI-IF: 1.762

Sarada Prasad Parida, Pankaj Charan Jena, Selective layer-by-layer fillering and its effect on the dynamic response of laminated composite plates using higher-order theory, Journal of Vibration and Control, 2022. https://doi.org/10.1177%2F10775463221081180, SCOPUS, SCI-IF: 3.095

Sarada Prasad Parida, Pankaj Charan Jena, Free and forced vibration analysis of flyash/graphene filled laminated composite plates using higher order shear deformation theory, Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science, 2022, https://doi.org/10.1177%2F09544062211053181 SCOPUS, SCI-IF: 1.762

Saritprava Sahoo, Pankaj Charan Jena, Preparation and Characterization of Hybrid Laminated Composite Beams, Advances in Materials and Processing Technologies, 2021, DOI:10.1080/2374068X.2021.1953924 SCOPUS, ESCI.

Sarada Prasad Parida, Pankaj Charan Jena, Comparative Stress analysis of different suitable Biomaterials for Artificial Hip Joint and Femur Bone using Finite Element Simulation, Advances in Materials and Processing Technologies, 2021, DOI:10.1080/2374068X.2021.1949541 SCOPUS, ESCI.

Subhadip Pradhan, Sudhansu Ranjan Das, Pankaj Charan Jena, Debabrata Dhupal Investigations on Surface Integrity in Hard Turning of Functionally Graded Specimen under Nano Fluid Assisted Minimum Quantity Lubrication, Advances in Materials and Processing Technologies, 2021, DOI:10.1080/2374068X.2021.1948706 SCOPUS, ESCI.

Saurav Kumar Bhatt, Pankaj Charan Jena, Anish Pandey, Dayal R. Parhi, Design and Analysis of a Novel Concept-Based Six-Wheels Rocker-Bogie Robot, Journal of Huazhong University of Science and Technology, Vol.50(4), 1-20, 2021 SCOPUS

Pradhan, S., Das, S.R., Jena, P.C., Dhupal, D., Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach, Proceedings of Institute Mechanical Engineering Part C: J Mechanical Engineering Science 0(0) 1â€“27, 2021, DOI: 10.1177/09544062211010199 SCOPUS, SCI-IF: 1.762.

Pradhan, S., Das, S.R., Nanda, B.K., Jena, P.C., Dhupal, D., Experimental investigation on machining of hardstone quartz with modified AJM using hot silicon carbide abrasives, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol.42, No.11, 559, 2020, SCIE-IF: 2.220.

Pradhan, S., Das, S.R., Nanda, B.K., Jena, P.C., Dhupal, D.,Machining of Hard stone Quartz With Modified AJM Process using Hot SiC Abrasives: Analysis, Modeling, Optimization, and Cost Analysis, Surface Review And Letters, 2020, 2050049 SCIE-IF: 1.152.

Sarada Prasad Parida, Pankaj Charan Jena*, â€œAdvances of Shear Deformation Theory for Analyzing the Dynamics of Laminated Composite Plates: An Overviewâ€, Mechanics of Composite Materials, Vol. 56, No. 4, 455â€“484, 2020. SCIE-IF: 1.33.

Sarmila Singh, Sarada Prasad Parida, Premananda Ekka, Pankaj Charan Jena*, â€œCharacterization of Fabricated FG Pipe with Natural Fiber-Flyash-Epoxy using Centrifugal Castingâ€, International Journal of Innovative Technology and Exploring Engineering, Volume-8(11), PP., 2019, DOI: 10.35940/ijitee.J9831.0881019, SCOPUS.

Pankaj Charan Jena, Dayal R. Parhi and G. Pohit, â€œDynamic Investigation of FRP Cracked Beam Using Neural Network Techniqueâ€, Journal of Vibration Engineering & Technologies ,ISSN-2321-3558, Volume 7, 2019; 7: 647â€“661. DOI: 10.1007/s42417-019-00158-5. SCIE-IF: 1.889.

Sarada Prasad Parida, Pankaj Charan Jena, â€œDesign and Finite Element analysis of Thick walled Laminated Composite Pressure Vesselâ€, International Journal of Innovative Technology and Exploring Engineering, Volume-8 (10), PP.4389-4394, 2019, DOI: 10.35940/ijitee.J9831.0881019, ISSN: 2278-3075. SCOPUS.

Sarada P. Parida, Pankaj Charan Jena, R. R. Dash,, â€œDynamic analysis of laminated composite beam using Timoshenko beam Theoryâ€,International Journal of Engineering and Advanced Technology, Volume-8 Issue-6, PP.190-196, 2019, ISSN: 2249 â€“ 8958., DOI: 10.35940/ijeat.E7159.088619. SCOPUS.

Sarada Prasad Parida, Saritprava Sahoo, Basna Bidisha Bal, Pankaj Charan Jena, â€œBuckling analysis of Functionally Graded Natural Fiber-Flyash-Epoxy (FGNFFE) Cylinderâ€, International Journal of Engineering and Advanced Technology ISSN: 2249 â€“ 8958,Volume-8 (6), PP.4260-4265, 2019, DOI: 10.35940/ijeat.F9118.088619. SCOPUS.

Pranav Kumar Saraswat, SaritpravaSahoo, Sarada Prasad Parida, Pankaj Charan Jena, â€œFabrication, Characterization and Drilling Operation of Natural Fiber Reinforced Hybrid Composite With Filler (Fly-Ash/Graphene)â€, International Journal of Innovative Technology and Exploring Engineering, ISSN: 2278-3075, Volume-8 (10), PP.1653-1659, 2019, DOI: 10.35940/ijitee.J1253.0881019, SCOPUS.

Pankaj Charan Jena, â€œMechanical Properties of Fabricated CFRP with Fillerâ€, International Journal of Engineering and Advanced Technology ISSN: 2249â€“8958, Volume-8 (6), PP.1886-1892, 2019, DOI: 10.35940/ijeat.E7166.088619. SCOPUS.

S. Kayal, RabindraBehera, Pankaj Charan Jena, â€œSolidifying behavior and Characterization of Al (LM6) +SICP Metal Matrix Compositesâ€, International Journal of Engineering and Advanced Technology ISSN: 2249 â€“ 8958, Volume-8 (6), PP.2397-2403, 2019.DOI: 10.35940/ijeat.F8527.088619, SCOPUS.

Pankaj Charan Jena, Dayal R. Parhi and G. Pohit, â€œFault Measurement in Composite Structure by Fuzzy-Neuro Hybrid Technique from the Natural Frequency and Fibre Orientationâ€, Journal of Vibration Engineering & Technologies, Vol. 5(2), PP.124-36, 2017, DOI: 10.1007/s42417-019-00158-5, SCOPUS, SCIE-IF:1.889

Pankaj Charan Jena, Dayal R. Parhi and G. Pohit, â€œDynamic Study of Composite Cracked Beam by Changing the Angle of Bidirectional Fibresâ€, Iranian Journal of Science and Technology, Transactions A: Science, Vol.40(1):PP.27-37, 2016, DOI 10.1007/s40995-016-0006-yISSN 1028-6276. SCOPUS, SCIE-IF:1.194

Pankaj Charan Jena, Dayal R. Parhi and G. Pohit, â€œTheoretical, Numerical (FEM) and Experimental Analysis of composite cracked beams of different boundary conditions using vibration mode shape curvaturesâ€, International Journal of Engineering and Technology, ISSN : 0975-4024, Vol. 6 No 2, PP.509-518, 2014.SCOPUS

Pankaj Charan Jena, N.Biswal, and R. P.Mohanty, An art of review on dynamic Behavior of sic particulate reinforced polymer composite Beams, International Journal of Engineering Sciences & Research Technology, Vol.5.3, 30-33, 2016.

Pankaj Charan Jena, N.Biswal, and R. P.Mohanty, Dynamic behavior of SiC particulate reinforced polymer composite beam, International Journal of Multidisciplinary Research and Development, Volume 3; Issue 4; 117-124, 2016.

Shakti P.Jena, Dayal R.Parhi, and Pankaj Charan Jena, Dynamic Response of Damaged Cantilever Beam Subjected to Traversing Mass, International Journal for Technological Research In Engineering (IJTRE) 2(7), 860-865, 2015.

Pankaj Charan Jena, Dayal R. Parhi, and G. Pohit,Faults Recognition of a Single Cracked Beam with Analytical and Experimental Methods by using Vibration Signatures. International Journal of Applied Artificial Intelligence in Engineering System, 6(1), 63-76, 2014.

Pankaj Charan Jena, Dayal R. Parhi, and G. Pohit, A Review on Various Techniques and Methodologies Applied to the Study on Faults Detection of Cracked Composite and Non-composite Beam, International Journal of Artificial Intelligence and Computational Research, 6 .1, 69-75, 2014.

Pankaj Charan Jena, Dayal R. Parhi, and G. Pohit,Faults detection of a single cracked beam by theoretical and experimental analysis using vibration signatures, Journal of Mechanical and Civil Engineering, 4.3,1-18, 2012.

Pankaj Charan Jena, Dayal R. Parhi, and G. Pohit,Study about of Faults Detection of a Single Cracked Beam Through Various Techniques, International Journal of Applied Artificial Intelligence in Engineering System, 4.1, 51-58, 2012.

Das, A., Das, S. R., Panda, A., & Patel, S. K. (2022). Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 236(5), 1889-1905.

Das, A., Padhan, S., & Das, S. R. (2022). Analysis on hole overcut during micro-EDM of Inconel 718. Materials Today: Proceedings, 56, 29-35.

Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2021). Analysis on surface integrity and sustainability assessment in electrical discharge machining of engineered Al-22% SiC metal matrix composite. Rev Metal, 57(4), e210.

Pradhan, S., Sahu, S., Das, S. R., & Dhupal, D. (2021). Experimental study and simulation of surface generation during machining of K-80 alumina ceramic in modified abrasive jet machining with different temperatures using Al2O3 abrasives. International Journal of Abrasive Technology, 10(4), 298-329.

Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2020). Experimental investigation on machining of hardstone quartz with modified AJM using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-22.

Panda, A., Das, S. R., Dhupal, D., & Davim, J. P. (2018). Hard turning of HSLA steel with coated ceramic tool based on evaluation of surface roughness, tool wear, chip morphology and economic analysis. Journal of Manufacturing Technology Research, 10(3/4), 113-141.

Panda, A., Das, S. R., & Dhupal, D. (2018). Experimental investigation, modelling and optimization in hard turning of high strength low alloy steel (AISI 4340). Matériaux & Techniques, 106(4), 404.

Das, S. R., Kumar, A., & Dhupal, D. (2015). Surface roughness analysis of hardened steel using TiN coated ceramic inserts. International Journal of Machining and Machinability of Materials, 17(1), 22-38.

Das, A., Padhan, S., Das, S. R., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2021). Performance assessment and chip morphology evaluation of austenitic stainless steel under sustainable machining conditions. Metals, 11(12), 1931.

Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2022). Electrical discharge machining of engineered Al-22% SiC metal matrix composite: surface roughness analysis, optimization, economic analysis, and sustainability assessment. Process Integration and Optimization for Sustainability, 1-29.

Behera, R. K., Samal, B. P., Panigrahi, S. C., Das, S. R., Mohamed, A., Muduli, K., ... & Das, R. (2022). Experimental analysis on machinability aspects of sintered aluminium metal matrix (Al+ Si+ Mg+ Cu+ SiC) composite-a novel product produced by powder metallurgy method. International Journal of Materials Engineering Innovation, 13(1), 1-22.

Das, A., Gautam, A., Panda, A., Das, S. R., Debnath, K., Ramakrishna, C., & Patel, S. K. (2022). Comparative performance evaluation between uncoated and TiAlN+ AlCrN coated carbide tools in hard turning of AISI H11 steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089221110430.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(2), 1009-1035.

Rout, B., Dash, R., Dhupal, D., & Das, S. R. (2022). Optimized posture prediction for task specific during stacking process using human upper body movements. International Journal on Interactive Design and Manufacturing (IJIDeM), 16(1), 291-303.

Das, A., Kamal, M., Das, S. R., Patel, S. K., Panda, A., Rafighi, M., & Biswal, B. B. (2022). Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(6), 3174-3197.

Padhan, S., Das, S. R., Das, A., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2022). Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials, 15(7), 2368.

Das, A., Gupta, M. K., Das, S. R., Panda, A., Patel, S. K., & Padhan, S. (2022). Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: comparative machinability investigation and sustainability assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(4), 138.

Rafighi, M., Özdemir, M., Das, A., & Das, S. R. (2022). Machinability investigation of cryogenically treated hardened AISI 4140 alloy steel using CBN insert under sustainable finish dry hard turning. Surface Review and Letters, 29(04), 2250047.

Das, A., Mohapatra, S., Gajrani, K. K., Das, S. R., & Patel, S. K. (2022). Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 09544054221111884.

Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., Somani, N., & Gupta, N. K. (2022). Machine Learning-based modeling and optimization in hard turning of AISI D6 steel with advanced AlTiSiN-coated carbide inserts to predict surface roughness and other machining characteristics. Surface Review and Letters, 29(10), 2250137.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Investigations on surface integrity in hard turning of functionally graded specimen under nano fluid assisted minimum quantity lubrication. Advances in Materials and Processing Technologies, 8(sup3), 1714-1729.

Rafighi, M., Özdemir, M., ?ahino?lu, A., Kumar, R., & Das, S. R. (2022). Experimental assessment and topsis optimization of cutting force, surface roughness, and sound intensity in hard turning of AISI 52100 steel. Surface Review and Letters, 29(11), 2250150.

Babu, M. N., Anandan, V., Parthasarathi, N. L., Yildirim, C. V., Babu, M. D., & Das, S. R. (2022). Performance analysis in turning of D3 tool steel using silver nanoplatelets as additives under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(12), 591.

Ibrahim, A. M. M., Omer, M. A., Das, S. R., Li, W., Alsoufi, M. S., & Elsheikh, A. (2022). Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using vegetable oil enriched with nano-additives. Alexandria Engineering Journal, 61(12), 10925-10938.

Kumar, N., Kumar, A., & Das, S. R. (2023). ELECTROCHEMICAL ARC DRILLING OF NICKEL–TITANIUM SHAPE MEMORY ALLOY USING MOLYBDENUM ELECTRODE: INVESTIGATION, MODELING AND OPTIMIZATION. Surface Review & Letters, 30(8).

Wagri, N. K., Jain, N. K., Petare, A., Das, S. R., Tharwan, M. Y., Alansari, A., ... & Elsheikh, A. (2023). Investigation on the performance of coated carbide tool during dry turning of AISI 4340 alloy steel. Materials, 16(2), 668.

Padhan, S., Wagri, N. K., Dash, L., Das, A., Das, S. R., Rafighi, M., & Sharma, P. (2023). Investigation on surface integrity in hard turning of AISI 4140 steel with SPPP-AlTiSiN coated carbide insert under nano-MQL. Lubricants, 11(2), 49.

Mahapatra, S., Das, A., Jena, P. C., & Das, S. R. (2023). Turning of hardened AISI H13 steel with recently developed S3P-AlTiSiN coated carbide tool using MWCNT mixed nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 237(4), 843-864.

Sharma, P., Soni, H., Sethy, S., Das, S. R., Tharwan, M. Y., Al Sofyani, S., ... & Elsheikh, A. (2023). Surface characterization of SAE 304 after WED cutting: An experimental investigation and optimization. Journal of Materials Research and Technology, 23, 5723-5732.

Mishra, P. C., Roychoudhury, A., Banerjee, A., Saha, N., Das, S. R., & Das, A. (2023). Coated Piston Ring Pack and Cylinder Liner Elastodynamics in Correlation to Piston Subsystem Elastohydrodynamic: Through FEA Modelling. Lubricants, 11(5), 192.

Pittala, R. K., Sharma, P., Anne, G., Patil, S., Varghese, V., Das, S. R., ... & Fernandes, F. (2023). Development and Mechanical Characterization of Ni-Cr Alloy Foam Using Ultrasonic-Assisted Electroplating Coating Technique. Coatings, 13(6), 1002.

Biswal, S., Das, S. R., Saha, N., & Mishra, P. C. (2023). Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environment, Development and Sustainability, 1-32. https://doi.org/10.1007/s10668-023-03752-6

Kumar, N., Kumar, A., Sethy, S., & Das, S. R. (2023). Investigation and optimization in electrochemical arc drilling of Ni55. 7Ti nickel–titanium shape memory alloy with molybdenum electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45(9), 448.

Somani, N., Walia, A. S., Gupta, N. K., Panda, J. P., Das, A., & Das, S. R. (2023). Data driven surrogate model-based optimization of the process parameters in electric discharge machining of D2 steel using Cu-SiC composite tool for the machined surface roughness and the tool wear. Revista de Metalurgia, 59(2), e242-e242.

Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). ANALYSIS ON POWER CONSUMPTION FOR LIFE CYCLE SUSTAINABILITY ASSESSMENT IN HARD TURNING OF AISI 4140 STEEL USING SPPPâ€” AlTiSiN-COATED CARBIDE TOOL UNDER VARIOUS CUTTING ENVIRONMENTS. Surface Review and Letters (SRL), 31(06), 1-26.

Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Investigation on Surface Roughness and Power Consumption for Sustainability Assessment in Hard Turning of HSLA Steel With SPPP?AlTiSiN–Coated Carbide Tool Under Various Cooling?Lubrications. Lubrication Science. https://doi.org/10.1002/ls.1717

Das, A., Barrenkala, D., Das, S. R., Patel, S. K., Somani, N., & Kumar, C. S. (2024). Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089231223021.

Dhupal, D., Panigrahi, D., Rout, S., Bhuyan, R. K., Nayak, S., Jena, P. C., & Das, S. R. (2024). Generation of effusion holes on ultra-high temperature alloy by micro electro-discharge machining process. Surface Review and Letters, 31(02), 2450015.

Padhan, S., Das, A., & Das, S. R. (2024). Analysis, modelling and optimization on tool vibration in machining of nitronic 60 with SiAlON ceramic tool. Advances in Materials and Processing Technologies, 1-14.

Roy, S., Das, A., Kumar, R., Das, S. R., Rafighi, M., & Sharma, P. (2024). Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on the performance and sustainability assessment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 09544054241229472.

Sethy, S., Rana, J., Sharma, P., & Das, S. R. (2024). Comparative performance investigation and sustainability assessment in electrical discharge machining of SS316 using different dielectrics. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238(7), 2718-2733.

Panda, D., Sahu, S. K., & Das, S. R. (2024). Comparative performance evaluation and economic assessment between traditional and vibration assisted EDM during machining of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 09544062241244949.

Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. (2024). Comparative performance investigation and sustainability evaluation between hot-AJM and AJM during machining of zirconia ceramic using Al2O3 abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46(5), 263.

Das, A., Kumar, A., Padhan, S., Das, S. R., Satpathy, M. P., & Patel, S. K. (2024). Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: comparative machining performance evaluation and economic assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46(5), 277.

Sethy, S., Das, S. R., Rana, J., Behera, A. K., & Gupta, M. K. (2024). Performance evaluation and economic assessment in electrical discharge machining of SS316 using graphite powder dispersed in biodegradable palm oil dielectric. Surface Review and Letters, 2450120.

Sarangi, S., Behera, A. K., Bajpai, S., Sahoo, S., Sethy, S., & Das, S. R. (2024). Application of tri-vector analysis to identify the optimum coating thickness in induced draft fans. Surface Review and Letters. https://doi.org/10.1142/S0218625X24501336

Parida, S. P., Mishra, D., Padhy, R. L., Jena, P. C., Das, S. R., Basem, A. A., ... & Elsheikh, A. (2024). Effect of Alkali Treatment on Mechanical and Buckling Behaviour of Natural Fiber Reinforced Composite Cylinder. ES Materials & Manufacturing, 24, 1161.

Parida, S. P., Jena, P. C., Das, S. R., Basem, A., Khatua, A. K., & Elsheikh, A. H. (2024). Transverse vibration of laminated-composite-plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 09544062241256589.

Elsheikh, A. H., Abd Elaziz, M., Das, S. R., Muthuramalingam, T., & Lu, S. (2021). A new optimized predictive model based on political optimizer for eco-friendly MQL-turning of AISI 4340 alloy with nano-lubricants. Journal of Manufacturing Processes, 67, 562-578.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Investigations on surface integrity in hard turning of functionally graded specimen under nano fluid assisted minimum quantity lubrication. Advances in Materials and Processing Technologies, 8(sup3), 1714-1729.

Parida, S. P., Jena, P. C., Das, S. R., Dhupal, D., & Dash, R. R. (2022). Comparative stress analysis of different suitable biomaterials for artificial hip joint and femur bone using finite element simulation. Advances in Materials and Processing Technologies, 8(sup3), 1741-1756.

Lalatendu Dash, Smita Padhan, Anshuman Das, Sudhansu Ranjan Das, “Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, doi:10.1177/0954406221993844 (2021). SCIE

Behera, R. K., Samal, B. P., Panigrahi, S. C., & Das, S. R. (2021). Optimization of erosion wears of Al–Mg–Si–Cu–SiC composite produced by the PM method. Corrosion Reviews, 39(1), 63-75.

Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2021). Machining of hardstone quartz with modified AJM process using hot SiC abrasives: analysis, modeling, optimization, and cost analysis. Surface Review and Letters, 28(02), 2050049.

Dash, L., Padhan, S., & Das, S. R. (2020). Design optimization for analysis of surface integrity and chip morphology in hard turning. Structural Engineering and Mechanics, An Int'l Journal, 76(5), 561-578.

Dash, L., Padhan, S., & Das, S. R. (2020). Experimental investigations on surface integrity and chip morphology in hard tuning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42(10), 500.

Pradhan, S., Das, S. R., & Dhupal, D. (2021). Performance evaluation of recently developed new process HAJM during machining hardstone quartz using hot silicon carbide abrasives: an experimental investigation and sustainability assessment. Silicon, 13(9), 2895-2919.

Padhan, S., Dash, L., Behera, S. K., & Das, S. R. (2020). Modeling and optimization of power consumption for economic analysis, energy-saving carbon footprint analysis, and sustainability assessment in finish hard turning under graphene nanoparticle–assisted minimum quantity lubrication. Process Integration and Optimization for Sustainability, 4, 445-463.

Naik, S., Das, S. R., & Dhupal, D. (2020). Analysis, predictive modelling and multi-response optimization in electrical discharge machining of Al-22% SiC metal matrix composite for minimization of surface roughness and hole overcut. Manufacturing Review, 7, 20.

Naik, S., Das, S. R., & Dhupal, D. (2021). Experimental investigation, predictive modeling, parametric optimization and cost analysis in electrical discharge machining of Al-SiC metal matrix composite. Silicon, 13, 1017-1040.

Panda, A., Das, S. R., & Dhupal, D. (2020). Machinability investigation and sustainability assessment in FDHT with coated ceramic tool. Steel and Composite Structures, An International Journal, 34(5), 681-698.

Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts. Mechanics & Industry, 21(1), 110.

Padhan, S., Das, A., Santoshwar, A., Dharmendrabhai, T. R., & Das, S. R. (2021). Sustainability assessment and machinability investigation of austenitic stainless steel in finish turning with advanced ultra-hard SiAlON ceramic tool under different cutting environments. Silicon, 13, 119-147.

Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2020). Performance evaluation of aluminium oxide nano particles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. Scientia Iranica, 27(6), 2838-2852.

Pradhan, S., Dhupal, D., Das, S. R., & Jena, P. C. (2021). Experimental investigation and optimization on machined surface of Si3N4 ceramic using hot SiC abrasive in HAJM. Materials Today: Proceedings, 44, 1877-1887.

Pradhan, S., Tripathy, S. S., Sahu, S., Das, S. R., Jena, P. C., & Dhupal, D. (2020). Investigation on MRR and DOC of the micro-holes generated on quartz using silicon carbide by FB-HAJM. Materials Today: Proceedings, 26, 2005-2012.

Behera, R. K., & Das, S. R. (2019). Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic. Matériaux & Techniques, 107(6), 603.

Das, A., Pradhan, O., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). Performance appraisal of various nanofluids during hard machining of AISI 4340 steel. Journal of Manufacturing Processes, 46, 248-270.

Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel. Machining Science and Technology, 24(2), 291-320.

Das, A., Patel, S. K., & Das, S. R. (2019). Performance comparison of vegetable oil based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication. Mechanics & Industry, 20(5), 506.

Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryo treated cermet inserts. Journal of Superhard Materials, 41, 247-264.

Panda, A., Ranjan Das, S., & Dhupal, D. (2019). Machinability investigation of HSLA steel in hard turning with coated ceramic tool: assessment, modeling, optimization and economic aspects. Journal of Advanced Manufacturing Systems, 18(04), 625-655.

Das, A., Tirkey, N., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). A comparison of machinability in hard turning of EN-24 alloy steel under mist cooled and dry cutting environments with a coated cermet tool. Journal of Failure Analysis and Prevention, 19, 115-130.

Dixit, S. R., Das, S. R., & Dhupal, D. (2019). Parametric optimization of Nd: YAG laser microgrooving on aluminum oxide using integrated RSM-ANN-GA approach. Journal of Industrial Engineering International, 15, 333-349.

Anand, A., Behera, A. K., & Das, S. R. (2019). An overview on economic machining of hardened steels by hard turning and its process variables. Manufacturing Review, 6, 4.

DHUPAL, D., DIXIT, S. R., & DAS, S. R. (2018). Optimization of process parameters in laser microgrooving of alumina ceramic using genetic algorithm. UPB Sci. Bull., 80, 163-178.

Dhupal, D., Mohanty, S., Dixit, S. R., Das, S. R., & Nanda, B. K. (2018). Micromachining on Al-SiC based metal matrix composite using DPSS laser. Materials Today: Proceedings, 5(5), 11304-11318.

Dhupal, D., Naik, S., & Das, S. R. (2018). Modelling and optimization of Al–SiC MMC through EDM process using copper and brass electrodes. Materials Today: Proceedings, 5(5), 11295-11303.

Das, S. R., Panda, A., & Dhupal, D. (2018). Hard turning of AISI 4340 steel using coated carbide insert: Surface roughness, tool wear, chip morphology and cost estimation. Materials Today: Proceedings, 5(2), 6560-6569.

Nanda, B. K., Dhupal, D., Buda, D., & Das, S. R. (2018). Abrasive jet drilling of alumina ceramic with pressurized-fluidized bed set-up. Materials Today: Proceedings, 5(5), 12570-12578.

Panda, A., Das, S. R., & Dhupal, D. (2017). Surface roughness analysis for economical feasibility study of coated ceramic tool in hard turning operation. Process Integration and Optimization for Sustainability, 1, 237-249.

Das, S. R., Panda, A., & Dhupal, D. (2017). Experimental investigation of surface roughness, flank wear, chip morphology and cost estimation during machining of hardened AISI 4340 steel with coated carbide insert. Mechanics of Advanced Materials and Modern Processes, 3, 1-14.

Das, S. R., Kumar, A., & Dhupal, D. (2016). Experimental investigation on cutting force and surface roughness in machining of hardened AISI 52100 steel using cBN tool. International Journal of Machining and Machinability of Materials, 18(5-6), 501-521.

Das, S. R., Dhupal, D., & Kumar, A. (2015). Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts. Journal of Mechanical Science and Technology, 29, 4329-4340.

Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108-126.

Das, A., Das, S. R., Panda, A., & Patel, S. K. (2022). Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 236(5), 1889-1905.

Das, A., Padhan, S., & Das, S. R. (2022). Analysis on hole overcut during micro-EDM of Inconel 718. Materials Today: Proceedings, 56, 29-35.

Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2021). Analysis on surface integrity and sustainability assessment in electrical discharge machining of engineered Al-22% SiC metal matrix composite. Rev Metal, 57(4), e210.

Pradhan, S., Sahu, S., Das, S. R., & Dhupal, D. (2021). Experimental study and simulation of surface generation during machining of K-80 alumina ceramic in modified abrasive jet machining with different temperatures using Al2O3 abrasives. International Journal of Abrasive Technology, 10(4), 298-329.

Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2020). Experimental investigation on machining of hardstone quartz with modified AJM using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-22.

Panda, A., Das, S. R., Dhupal, D., & Davim, J. P. (2018). Hard turning of HSLA steel with coated ceramic tool based on evaluation of surface roughness, tool wear, chip morphology and economic analysis. Journal of Manufacturing Technology Research, 10(3/4), 113-141.

Panda, A., Das, S. R., & Dhupal, D. (2018). Experimental investigation, modelling and optimization in hard turning of high strength low alloy steel (AISI 4340). Matériaux & Techniques, 106(4), 404.

Das, S. R., Kumar, A., & Dhupal, D. (2015). Surface roughness analysis of hardened steel using TiN coated ceramic inserts. International Journal of Machining and Machinability of Materials, 17(1), 22-38.

Das, A., Padhan, S., Das, S. R., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2021). Performance assessment and chip morphology evaluation of austenitic stainless steel under sustainable machining conditions. Metals, 11(12), 1931.

Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2022). Electrical discharge machining of engineered Al-22% SiC metal matrix composite: surface roughness analysis, optimization, economic analysis, and sustainability assessment. Process Integration and Optimization for Sustainability, 1-29.

Behera, R. K., Samal, B. P., Panigrahi, S. C., Das, S. R., Mohamed, A., Muduli, K., ... & Das, R. (2022). Experimental analysis on machinability aspects of sintered aluminium metal matrix (Al+ Si+ Mg+ Cu+ SiC) composite-a novel product produced by powder metallurgy method. International Journal of Materials Engineering Innovation, 13(1), 1-22.

Das, A., Gautam, A., Panda, A., Das, S. R., Debnath, K., Ramakrishna, C., & Patel, S. K. (2022). Comparative performance evaluation between uncoated and TiAlN+ AlCrN coated carbide tools in hard turning of AISI H11 steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089221110430.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(2), 1009-1035.

Rout, B., Dash, R., Dhupal, D., & Das, S. R. (2022). Optimized posture prediction for task specific during stacking process using human upper body movements. International Journal on Interactive Design and Manufacturing (IJIDeM), 16(1), 291-303.

Das, A., Kamal, M., Das, S. R., Patel, S. K., Panda, A., Rafighi, M., & Biswal, B. B. (2022). Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(6), 3174-3197.

Padhan, S., Das, S. R., Das, A., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2022). Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials, 15(7), 2368.

Das, A., Gupta, M. K., Das, S. R., Panda, A., Patel, S. K., & Padhan, S. (2022). Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: comparative machinability investigation and sustainability assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(4), 138.

Rafighi, M., Özdemir, M., Das, A., & Das, S. R. (2022). Machinability investigation of cryogenically treated hardened AISI 4140 alloy steel using CBN insert under sustainable finish dry hard turning. Surface Review and Letters, 29(04), 2250047.

Das, A., Mohapatra, S., Gajrani, K. K., Das, S. R., & Patel, S. K. (2022). Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 09544054221111884.

Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., Somani, N., & Gupta, N. K. (2022). Machine Learning-based modeling and optimization in hard turning of AISI D6 steel with advanced AlTiSiN-coated carbide inserts to predict surface roughness and other machining characteristics. Surface Review and Letters, 29(10), 2250137.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Investigations on surface integrity in hard turning of functionally graded specimen under nano fluid assisted minimum quantity lubrication. Advances in Materials and Processing Technologies, 8(sup3), 1714-1729.

Rafighi, M., Özdemir, M., ?ahino?lu, A., Kumar, R., & Das, S. R. (2022). Experimental assessment and topsis optimization of cutting force, surface roughness, and sound intensity in hard turning of AISI 52100 steel. Surface Review and Letters, 29(11), 2250150.

Babu, M. N., Anandan, V., Parthasarathi, N. L., Yildirim, C. V., Babu, M. D., & Das, S. R. (2022). Performance analysis in turning of D3 tool steel using silver nanoplatelets as additives under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(12), 591.

Ibrahim, A. M. M., Omer, M. A., Das, S. R., Li, W., Alsoufi, M. S., & Elsheikh, A. (2022). Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using vegetable oil enriched with nano-additives. Alexandria Engineering Journal, 61(12), 10925-10938.

Kumar, N., Kumar, A., & Das, S. R. (2023). ELECTROCHEMICAL ARC DRILLING OF NICKEL–TITANIUM SHAPE MEMORY ALLOY USING MOLYBDENUM ELECTRODE: INVESTIGATION, MODELING AND OPTIMIZATION. Surface Review & Letters, 30(8).

Wagri, N. K., Jain, N. K., Petare, A., Das, S. R., Tharwan, M. Y., Alansari, A., ... & Elsheikh, A. (2023). Investigation on the performance of coated carbide tool during dry turning of AISI 4340 alloy steel. Materials, 16(2), 668.

Padhan, S., Wagri, N. K., Dash, L., Das, A., Das, S. R., Rafighi, M., & Sharma, P. (2023). Investigation on surface integrity in hard turning of AISI 4140 steel with SPPP-AlTiSiN coated carbide insert under nano-MQL. Lubricants, 11(2), 49.

Mahapatra, S., Das, A., Jena, P. C., & Das, S. R. (2023). Turning of hardened AISI H13 steel with recently developed S3P-AlTiSiN coated carbide tool using MWCNT mixed nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 237(4), 843-864.

Sharma, P., Soni, H., Sethy, S., Das, S. R., Tharwan, M. Y., Al Sofyani, S., ... & Elsheikh, A. (2023). Surface characterization of SAE 304 after WED cutting: An experimental investigation and optimization. Journal of Materials Research and Technology, 23, 5723-5732.

Mishra, P. C., Roychoudhury, A., Banerjee, A., Saha, N., Das, S. R., & Das, A. (2023). Coated Piston Ring Pack and Cylinder Liner Elastodynamics in Correlation to Piston Subsystem Elastohydrodynamic: Through FEA Modelling. Lubricants, 11(5), 192.

Pittala, R. K., Sharma, P., Anne, G., Patil, S., Varghese, V., Das, S. R., ... & Fernandes, F. (2023). Development and Mechanical Characterization of Ni-Cr Alloy Foam Using Ultrasonic-Assisted Electroplating Coating Technique. Coatings, 13(6), 1002.

Biswal, S., Das, S. R., Saha, N., & Mishra, P. C. (2023). Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environment, Development and Sustainability, 1-32. https://doi.org/10.1007/s10668-023-03752-6

Kumar, N., Kumar, A., Sethy, S., & Das, S. R. (2023). Investigation and optimization in electrochemical arc drilling of Ni55. 7Ti nickel–titanium shape memory alloy with molybdenum electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45(9), 448.

Somani, N., Walia, A. S., Gupta, N. K., Panda, J. P., Das, A., & Das, S. R. (2023). Data driven surrogate model-based optimization of the process parameters in electric discharge machining of D2 steel using Cu-SiC composite tool for the machined surface roughness and the tool wear. Revista de Metalurgia, 59(2), e242-e242.

Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). ANALYSIS ON POWER CONSUMPTION FOR LIFE CYCLE SUSTAINABILITY ASSESSMENT IN HARD TURNING OF AISI 4140 STEEL USING SPPPâ€” AlTiSiN-COATED CARBIDE TOOL UNDER VARIOUS CUTTING ENVIRONMENTS. Surface Review and Letters (SRL), 31(06), 1-26.

Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Investigation on Surface Roughness and Power Consumption for Sustainability Assessment in Hard Turning of HSLA Steel With SPPP?AlTiSiN–Coated Carbide Tool Under Various Cooling?Lubrications. Lubrication Science. https://doi.org/10.1002/ls.1717

Das, A., Barrenkala, D., Das, S. R., Patel, S. K., Somani, N., & Kumar, C. S. (2024). Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089231223021.

Dhupal, D., Panigrahi, D., Rout, S., Bhuyan, R. K., Nayak, S., Jena, P. C., & Das, S. R. (2024). Generation of effusion holes on ultra-high temperature alloy by micro electro-discharge machining process. Surface Review and Letters, 31(02), 2450015.

Padhan, S., Das, A., & Das, S. R. (2024). Analysis, modelling and optimization on tool vibration in machining of nitronic 60 with SiAlON ceramic tool. Advances in Materials and Processing Technologies, 1-14.

Roy, S., Das, A., Kumar, R., Das, S. R., Rafighi, M., & Sharma, P. (2024). Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on the performance and sustainability assessment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 09544054241229472.

Sethy, S., Rana, J., Sharma, P., & Das, S. R. (2024). Comparative performance investigation and sustainability assessment in electrical discharge machining of SS316 using different dielectrics. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238(7), 2718-2733.

Panda, D., Sahu, S. K., & Das, S. R. (2024). Comparative performance evaluation and economic assessment between traditional and vibration assisted EDM during machining of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 09544062241244949.

Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. (2024). Comparative performance investigation and sustainability evaluation between hot-AJM and AJM during machining of zirconia ceramic using Al2O3 abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46(5), 263.

Das, A., Kumar, A., Padhan, S., Das, S. R., Satpathy, M. P., & Patel, S. K. (2024). Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: comparative machining performance evaluation and economic assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46(5), 277.

Sethy, S., Das, S. R., Rana, J., Behera, A. K., & Gupta, M. K. (2024). Performance evaluation and economic assessment in electrical discharge machining of SS316 using graphite powder dispersed in biodegradable palm oil dielectric. Surface Review and Letters, 2450120.

Sarangi, S., Behera, A. K., Bajpai, S., Sahoo, S., Sethy, S., & Das, S. R. (2024). Application of tri-vector analysis to identify the optimum coating thickness in induced draft fans. Surface Review and Letters. https://doi.org/10.1142/S0218625X24501336

Parida, S. P., Mishra, D., Padhy, R. L., Jena, P. C., Das, S. R., Basem, A. A., ... & Elsheikh, A. (2024). Effect of Alkali Treatment on Mechanical and Buckling Behaviour of Natural Fiber Reinforced Composite Cylinder. ES Materials & Manufacturing, 24, 1161.

Parida, S. P., Jena, P. C., Das, S. R., Basem, A., Khatua, A. K., & Elsheikh, A. H. (2024). Transverse vibration of laminated-composite-plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 09544062241256589.

Elsheikh, A. H., Abd Elaziz, M., Das, S. R., Muthuramalingam, T., & Lu, S. (2021). A new optimized predictive model based on political optimizer for eco-friendly MQL-turning of AISI 4340 alloy with nano-lubricants. Journal of Manufacturing Processes, 67, 562-578.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Investigations on surface integrity in hard turning of functionally graded specimen under nano fluid assisted minimum quantity lubrication. Advances in Materials and Processing Technologies, 8(sup3), 1714-1729.

Parida, S. P., Jena, P. C., Das, S. R., Dhupal, D., & Dash, R. R. (2022). Comparative stress analysis of different suitable biomaterials for artificial hip joint and femur bone using finite element simulation. Advances in Materials and Processing Technologies, 8(sup3), 1741-1756.

Lalatendu Dash, Smita Padhan, Anshuman Das, Sudhansu Ranjan Das, “Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, doi:10.1177/0954406221993844 (2021). SCIE

Behera, R. K., Samal, B. P., Panigrahi, S. C., & Das, S. R. (2021). Optimization of erosion wears of Al–Mg–Si–Cu–SiC composite produced by the PM method. Corrosion Reviews, 39(1), 63-75.

Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2021). Machining of hardstone quartz with modified AJM process using hot SiC abrasives: analysis, modeling, optimization, and cost analysis. Surface Review and Letters, 28(02), 2050049.

Dash, L., Padhan, S., & Das, S. R. (2020). Design optimization for analysis of surface integrity and chip morphology in hard turning. Structural Engineering and Mechanics, An Int'l Journal, 76(5), 561-578.

Dash, L., Padhan, S., & Das, S. R. (2020). Experimental investigations on surface integrity and chip morphology in hard tuning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42(10), 500.

Pradhan, S., Das, S. R., & Dhupal, D. (2021). Performance evaluation of recently developed new process HAJM during machining hardstone quartz using hot silicon carbide abrasives: an experimental investigation and sustainability assessment. Silicon, 13(9), 2895-2919.

Padhan, S., Dash, L., Behera, S. K., & Das, S. R. (2020). Modeling and optimization of power consumption for economic analysis, energy-saving carbon footprint analysis, and sustainability assessment in finish hard turning under graphene nanoparticle–assisted minimum quantity lubrication. Process Integration and Optimization for Sustainability, 4, 445-463.

Naik, S., Das, S. R., & Dhupal, D. (2020). Analysis, predictive modelling and multi-response optimization in electrical discharge machining of Al-22% SiC metal matrix composite for minimization of surface roughness and hole overcut. Manufacturing Review, 7, 20.

Naik, S., Das, S. R., & Dhupal, D. (2021). Experimental investigation, predictive modeling, parametric optimization and cost analysis in electrical discharge machining of Al-SiC metal matrix composite. Silicon, 13, 1017-1040.

Panda, A., Das, S. R., & Dhupal, D. (2020). Machinability investigation and sustainability assessment in FDHT with coated ceramic tool. Steel and Composite Structures, An International Journal, 34(5), 681-698.

Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts. Mechanics & Industry, 21(1), 110.

Padhan, S., Das, A., Santoshwar, A., Dharmendrabhai, T. R., & Das, S. R. (2021). Sustainability assessment and machinability investigation of austenitic stainless steel in finish turning with advanced ultra-hard SiAlON ceramic tool under different cutting environments. Silicon, 13, 119-147.

Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2020). Performance evaluation of aluminium oxide nano particles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. Scientia Iranica, 27(6), 2838-2852.

Pradhan, S., Dhupal, D., Das, S. R., & Jena, P. C. (2021). Experimental investigation and optimization on machined surface of Si3N4 ceramic using hot SiC abrasive in HAJM. Materials Today: Proceedings, 44, 1877-1887.

Pradhan, S., Tripathy, S. S., Sahu, S., Das, S. R., Jena, P. C., & Dhupal, D. (2020). Investigation on MRR and DOC of the micro-holes generated on quartz using silicon carbide by FB-HAJM. Materials Today: Proceedings, 26, 2005-2012.

Behera, R. K., & Das, S. R. (2019). Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic. Matériaux & Techniques, 107(6), 603.

Das, A., Pradhan, O., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). Performance appraisal of various nanofluids during hard machining of AISI 4340 steel. Journal of Manufacturing Processes, 46, 248-270.

Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel. Machining Science and Technology, 24(2), 291-320.

Das, A., Patel, S. K., & Das, S. R. (2019). Performance comparison of vegetable oil based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication. Mechanics & Industry, 20(5), 506.

Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryo treated cermet inserts. Journal of Superhard Materials, 41, 247-264.

Panda, A., Ranjan Das, S., & Dhupal, D. (2019). Machinability investigation of HSLA steel in hard turning with coated ceramic tool: assessment, modeling, optimization and economic aspects. Journal of Advanced Manufacturing Systems, 18(04), 625-655.

Das, A., Tirkey, N., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). A comparison of machinability in hard turning of EN-24 alloy steel under mist cooled and dry cutting environments with a coated cermet tool. Journal of Failure Analysis and Prevention, 19, 115-130.

Dixit, S. R., Das, S. R., & Dhupal, D. (2019). Parametric optimization of Nd: YAG laser microgrooving on aluminum oxide using integrated RSM-ANN-GA approach. Journal of Industrial Engineering International, 15, 333-349.

Anand, A., Behera, A. K., & Das, S. R. (2019). An overview on economic machining of hardened steels by hard turning and its process variables. Manufacturing Review, 6, 4.

DHUPAL, D., DIXIT, S. R., & DAS, S. R. (2018). Optimization of process parameters in laser microgrooving of alumina ceramic using genetic algorithm. UPB Sci. Bull., 80, 163-178.

Dhupal, D., Mohanty, S., Dixit, S. R., Das, S. R., & Nanda, B. K. (2018). Micromachining on Al-SiC based metal matrix composite using DPSS laser. Materials Today: Proceedings, 5(5), 11304-11318.

Dhupal, D., Naik, S., & Das, S. R. (2018). Modelling and optimization of Al–SiC MMC through EDM process using copper and brass electrodes. Materials Today: Proceedings, 5(5), 11295-11303.

Das, S. R., Panda, A., & Dhupal, D. (2018). Hard turning of AISI 4340 steel using coated carbide insert: Surface roughness, tool wear, chip morphology and cost estimation. Materials Today: Proceedings, 5(2), 6560-6569.

Nanda, B. K., Dhupal, D., Buda, D., & Das, S. R. (2018). Abrasive jet drilling of alumina ceramic with pressurized-fluidized bed set-up. Materials Today: Proceedings, 5(5), 12570-12578.

Panda, A., Das, S. R., & Dhupal, D. (2017). Surface roughness analysis for economical feasibility study of coated ceramic tool in hard turning operation. Process Integration and Optimization for Sustainability, 1, 237-249.

Das, S. R., Panda, A., & Dhupal, D. (2017). Experimental investigation of surface roughness, flank wear, chip morphology and cost estimation during machining of hardened AISI 4340 steel with coated carbide insert. Mechanics of Advanced Materials and Modern Processes, 3, 1-14.

Das, S. R., Kumar, A., & Dhupal, D. (2016). Experimental investigation on cutting force and surface roughness in machining of hardened AISI 52100 steel using cBN tool. International Journal of Machining and Machinability of Materials, 18(5-6), 501-521.

Das, S. R., Dhupal, D., & Kumar, A. (2015). Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts. Journal of Mechanical Science and Technology, 29, 4329-4340.

Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108-126.

Das, A., Das, S. R., Panda, A., & Patel, S. K. (2022). Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 236(5), 1889-1905.

Das, A., Padhan, S., & Das, S. R. (2022). Analysis on hole overcut during micro-EDM of Inconel 718. Materials Today: Proceedings, 56, 29-35.

Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2021). Analysis on surface integrity and sustainability assessment in electrical discharge machining of engineered Al-22% SiC metal matrix composite. Rev Metal, 57(4), e210.

Pradhan, S., Sahu, S., Das, S. R., & Dhupal, D. (2021). Experimental study and simulation of surface generation during machining of K-80 alumina ceramic in modified abrasive jet machining with different temperatures using Al2O3 abrasives. International Journal of Abrasive Technology, 10(4), 298-329.

Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2020). Experimental investigation on machining of hardstone quartz with modified AJM using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-22.

Panda, A., Das, S. R., Dhupal, D., & Davim, J. P. (2018). Hard turning of HSLA steel with coated ceramic tool based on evaluation of surface roughness, tool wear, chip morphology and economic analysis. Journal of Manufacturing Technology Research, 10(3/4), 113-141.

Panda, A., Das, S. R., & Dhupal, D. (2018). Experimental investigation, modelling and optimization in hard turning of high strength low alloy steel (AISI 4340). Matériaux & Techniques, 106(4), 404.

Das, S. R., Kumar, A., & Dhupal, D. (2015). Surface roughness analysis of hardened steel using TiN coated ceramic inserts. International Journal of Machining and Machinability of Materials, 17(1), 22-38.

Das, A., Padhan, S., Das, S. R., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2021). Performance assessment and chip morphology evaluation of austenitic stainless steel under sustainable machining conditions. Metals, 11(12), 1931.

Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2022). Electrical discharge machining of engineered Al-22% SiC metal matrix composite: surface roughness analysis, optimization, economic analysis, and sustainability assessment. Process Integration and Optimization for Sustainability, 1-29.

Behera, R. K., Samal, B. P., Panigrahi, S. C., Das, S. R., Mohamed, A., Muduli, K., ... & Das, R. (2022). Experimental analysis on machinability aspects of sintered aluminium metal matrix (Al+ Si+ Mg+ Cu+ SiC) composite-a novel product produced by powder metallurgy method. International Journal of Materials Engineering Innovation, 13(1), 1-22.

Das, A., Gautam, A., Panda, A., Das, S. R., Debnath, K., Ramakrishna, C., & Patel, S. K. (2022). Comparative performance evaluation between uncoated and TiAlN+ AlCrN coated carbide tools in hard turning of AISI H11 steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089221110430.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(2), 1009-1035.

Rout, B., Dash, R., Dhupal, D., & Das, S. R. (2022). Optimized posture prediction for task specific during stacking process using human upper body movements. International Journal on Interactive Design and Manufacturing (IJIDeM), 16(1), 291-303.

Das, A., Kamal, M., Das, S. R., Patel, S. K., Panda, A., Rafighi, M., & Biswal, B. B. (2022). Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(6), 3174-3197.

Padhan, S., Das, S. R., Das, A., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2022). Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials, 15(7), 2368.

Das, A., Gupta, M. K., Das, S. R., Panda, A., Patel, S. K., & Padhan, S. (2022). Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: comparative machinability investigation and sustainability assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(4), 138.

Rafighi, M., Özdemir, M., Das, A., & Das, S. R. (2022). Machinability investigation of cryogenically treated hardened AISI 4140 alloy steel using CBN insert under sustainable finish dry hard turning. Surface Review and Letters, 29(04), 2250047.

Das, A., Mohapatra, S., Gajrani, K. K., Das, S. R., & Patel, S. K. (2022). Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 09544054221111884.

Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., Somani, N., & Gupta, N. K. (2022). Machine Learning-based modeling and optimization in hard turning of AISI D6 steel with advanced AlTiSiN-coated carbide inserts to predict surface roughness and other machining characteristics. Surface Review and Letters, 29(10), 2250137.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Investigations on surface integrity in hard turning of functionally graded specimen under nano fluid assisted minimum quantity lubrication. Advances in Materials and Processing Technologies, 8(sup3), 1714-1729.

Rafighi, M., Özdemir, M., ?ahino?lu, A., Kumar, R., & Das, S. R. (2022). Experimental assessment and topsis optimization of cutting force, surface roughness, and sound intensity in hard turning of AISI 52100 steel. Surface Review and Letters, 29(11), 2250150.

Babu, M. N., Anandan, V., Parthasarathi, N. L., Yildirim, C. V., Babu, M. D., & Das, S. R. (2022). Performance analysis in turning of D3 tool steel using silver nanoplatelets as additives under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(12), 591.

Ibrahim, A. M. M., Omer, M. A., Das, S. R., Li, W., Alsoufi, M. S., & Elsheikh, A. (2022). Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using vegetable oil enriched with nano-additives. Alexandria Engineering Journal, 61(12), 10925-10938.

Kumar, N., Kumar, A., & Das, S. R. (2023). ELECTROCHEMICAL ARC DRILLING OF NICKEL–TITANIUM SHAPE MEMORY ALLOY USING MOLYBDENUM ELECTRODE: INVESTIGATION, MODELING AND OPTIMIZATION. Surface Review & Letters, 30(8).

Wagri, N. K., Jain, N. K., Petare, A., Das, S. R., Tharwan, M. Y., Alansari, A., ... & Elsheikh, A. (2023). Investigation on the performance of coated carbide tool during dry turning of AISI 4340 alloy steel. Materials, 16(2), 668.

Padhan, S., Wagri, N. K., Dash, L., Das, A., Das, S. R., Rafighi, M., & Sharma, P. (2023). Investigation on surface integrity in hard turning of AISI 4140 steel with SPPP-AlTiSiN coated carbide insert under nano-MQL. Lubricants, 11(2), 49.

Mahapatra, S., Das, A., Jena, P. C., & Das, S. R. (2023). Turning of hardened AISI H13 steel with recently developed S3P-AlTiSiN coated carbide tool using MWCNT mixed nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 237(4), 843-864.

Sharma, P., Soni, H., Sethy, S., Das, S. R., Tharwan, M. Y., Al Sofyani, S., ... & Elsheikh, A. (2023). Surface characterization of SAE 304 after WED cutting: An experimental investigation and optimization. Journal of Materials Research and Technology, 23, 5723-5732.

Mishra, P. C., Roychoudhury, A., Banerjee, A., Saha, N., Das, S. R., & Das, A. (2023). Coated Piston Ring Pack and Cylinder Liner Elastodynamics in Correlation to Piston Subsystem Elastohydrodynamic: Through FEA Modelling. Lubricants, 11(5), 192.

Pittala, R. K., Sharma, P., Anne, G., Patil, S., Varghese, V., Das, S. R., ... & Fernandes, F. (2023). Development and Mechanical Characterization of Ni-Cr Alloy Foam Using Ultrasonic-Assisted Electroplating Coating Technique. Coatings, 13(6), 1002.

Biswal, S., Das, S. R., Saha, N., & Mishra, P. C. (2023). Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environment, Development and Sustainability, 1-32. https://doi.org/10.1007/s10668-023-03752-6

Kumar, N., Kumar, A., Sethy, S., & Das, S. R. (2023). Investigation and optimization in electrochemical arc drilling of Ni55. 7Ti nickel–titanium shape memory alloy with molybdenum electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45(9), 448.

Somani, N., Walia, A. S., Gupta, N. K., Panda, J. P., Das, A., & Das, S. R. (2023). Data driven surrogate model-based optimization of the process parameters in electric discharge machining of D2 steel using Cu-SiC composite tool for the machined surface roughness and the tool wear. Revista de Metalurgia, 59(2), e242-e242.

Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). ANALYSIS ON POWER CONSUMPTION FOR LIFE CYCLE SUSTAINABILITY ASSESSMENT IN HARD TURNING OF AISI 4140 STEEL USING SPPPâ€” AlTiSiN-COATED CARBIDE TOOL UNDER VARIOUS CUTTING ENVIRONMENTS. Surface Review and Letters (SRL), 31(06), 1-26.

Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Investigation on Surface Roughness and Power Consumption for Sustainability Assessment in Hard Turning of HSLA Steel With SPPP?AlTiSiN–Coated Carbide Tool Under Various Cooling?Lubrications. Lubrication Science. https://doi.org/10.1002/ls.1717

Das, A., Barrenkala, D., Das, S. R., Patel, S. K., Somani, N., & Kumar, C. S. (2024). Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089231223021.

Dhupal, D., Panigrahi, D., Rout, S., Bhuyan, R. K., Nayak, S., Jena, P. C., & Das, S. R. (2024). Generation of effusion holes on ultra-high temperature alloy by micro electro-discharge machining process. Surface Review and Letters, 31(02), 2450015.

Padhan, S., Das, A., & Das, S. R. (2024). Analysis, modelling and optimization on tool vibration in machining of nitronic 60 with SiAlON ceramic tool. Advances in Materials and Processing Technologies, 1-14.

Roy, S., Das, A., Kumar, R., Das, S. R., Rafighi, M., & Sharma, P. (2024). Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on the performance and sustainability assessment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 09544054241229472.

Sethy, S., Rana, J., Sharma, P., & Das, S. R. (2024). Comparative performance investigation and sustainability assessment in electrical discharge machining of SS316 using different dielectrics. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238(7), 2718-2733.

Panda, D., Sahu, S. K., & Das, S. R. (2024). Comparative performance evaluation and economic assessment between traditional and vibration assisted EDM during machining of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 09544062241244949.

Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. (2024). Comparative performance investigation and sustainability evaluation between hot-AJM and AJM during machining of zirconia ceramic using Al2O3 abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46(5), 263.

Das, A., Kumar, A., Padhan, S., Das, S. R., Satpathy, M. P., & Patel, S. K. (2024). Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: comparative machining performance evaluation and economic assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46(5), 277.

Sethy, S., Das, S. R., Rana, J., Behera, A. K., & Gupta, M. K. (2024). Performance evaluation and economic assessment in electrical discharge machining of SS316 using graphite powder dispersed in biodegradable palm oil dielectric. Surface Review and Letters, 2450120.

Sarangi, S., Behera, A. K., Bajpai, S., Sahoo, S., Sethy, S., & Das, S. R. (2024). Application of tri-vector analysis to identify the optimum coating thickness in induced draft fans. Surface Review and Letters. https://doi.org/10.1142/S0218625X24501336

Parida, S. P., Mishra, D., Padhy, R. L., Jena, P. C., Das, S. R., Basem, A. A., ... & Elsheikh, A. (2024). Effect of Alkali Treatment on Mechanical and Buckling Behaviour of Natural Fiber Reinforced Composite Cylinder. ES Materials & Manufacturing, 24, 1161.

Parida, S. P., Jena, P. C., Das, S. R., Basem, A., Khatua, A. K., & Elsheikh, A. H. (2024). Transverse vibration of laminated-composite-plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 09544062241256589.

Elsheikh, A. H., Abd Elaziz, M., Das, S. R., Muthuramalingam, T., & Lu, S. (2021). A new optimized predictive model based on political optimizer for eco-friendly MQL-turning of AISI 4340 alloy with nano-lubricants. Journal of Manufacturing Processes, 67, 562-578.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Investigations on surface integrity in hard turning of functionally graded specimen under nano fluid assisted minimum quantity lubrication. Advances in Materials and Processing Technologies, 8(sup3), 1714-1729.

Parida, S. P., Jena, P. C., Das, S. R., Dhupal, D., & Dash, R. R. (2022). Comparative stress analysis of different suitable biomaterials for artificial hip joint and femur bone using finite element simulation. Advances in Materials and Processing Technologies, 8(sup3), 1741-1756.

Lalatendu Dash, Smita Padhan, Anshuman Das, Sudhansu Ranjan Das, “Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, doi:10.1177/0954406221993844 (2021). SCIE

Behera, R. K., Samal, B. P., Panigrahi, S. C., & Das, S. R. (2021). Optimization of erosion wears of Al–Mg–Si–Cu–SiC composite produced by the PM method. Corrosion Reviews, 39(1), 63-75.

Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2021). Machining of hardstone quartz with modified AJM process using hot SiC abrasives: analysis, modeling, optimization, and cost analysis. Surface Review and Letters, 28(02), 2050049.

Dash, L., Padhan, S., & Das, S. R. (2020). Design optimization for analysis of surface integrity and chip morphology in hard turning. Structural Engineering and Mechanics, An Int'l Journal, 76(5), 561-578.

Dash, L., Padhan, S., & Das, S. R. (2020). Experimental investigations on surface integrity and chip morphology in hard tuning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42(10), 500.

Pradhan, S., Das, S. R., & Dhupal, D. (2021). Performance evaluation of recently developed new process HAJM during machining hardstone quartz using hot silicon carbide abrasives: an experimental investigation and sustainability assessment. Silicon, 13(9), 2895-2919.

Padhan, S., Dash, L., Behera, S. K., & Das, S. R. (2020). Modeling and optimization of power consumption for economic analysis, energy-saving carbon footprint analysis, and sustainability assessment in finish hard turning under graphene nanoparticle–assisted minimum quantity lubrication. Process Integration and Optimization for Sustainability, 4, 445-463.

Naik, S., Das, S. R., & Dhupal, D. (2020). Analysis, predictive modelling and multi-response optimization in electrical discharge machining of Al-22% SiC metal matrix composite for minimization of surface roughness and hole overcut. Manufacturing Review, 7, 20.

Naik, S., Das, S. R., & Dhupal, D. (2021). Experimental investigation, predictive modeling, parametric optimization and cost analysis in electrical discharge machining of Al-SiC metal matrix composite. Silicon, 13, 1017-1040.

Panda, A., Das, S. R., & Dhupal, D. (2020). Machinability investigation and sustainability assessment in FDHT with coated ceramic tool. Steel and Composite Structures, An International Journal, 34(5), 681-698.

Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts. Mechanics & Industry, 21(1), 110.

Padhan, S., Das, A., Santoshwar, A., Dharmendrabhai, T. R., & Das, S. R. (2021). Sustainability assessment and machinability investigation of austenitic stainless steel in finish turning with advanced ultra-hard SiAlON ceramic tool under different cutting environments. Silicon, 13, 119-147.

Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2020). Performance evaluation of aluminium oxide nano particles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. Scientia Iranica, 27(6), 2838-2852.

Pradhan, S., Dhupal, D., Das, S. R., & Jena, P. C. (2021). Experimental investigation and optimization on machined surface of Si3N4 ceramic using hot SiC abrasive in HAJM. Materials Today: Proceedings, 44, 1877-1887.

Pradhan, S., Tripathy, S. S., Sahu, S., Das, S. R., Jena, P. C., & Dhupal, D. (2020). Investigation on MRR and DOC of the micro-holes generated on quartz using silicon carbide by FB-HAJM. Materials Today: Proceedings, 26, 2005-2012.

Behera, R. K., & Das, S. R. (2019). Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic. Matériaux & Techniques, 107(6), 603.

Das, A., Pradhan, O., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). Performance appraisal of various nanofluids during hard machining of AISI 4340 steel. Journal of Manufacturing Processes, 46, 248-270.

Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel. Machining Science and Technology, 24(2), 291-320.

Das, A., Patel, S. K., & Das, S. R. (2019). Performance comparison of vegetable oil based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication. Mechanics & Industry, 20(5), 506.

Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryo treated cermet inserts. Journal of Superhard Materials, 41, 247-264.

Panda, A., Ranjan Das, S., & Dhupal, D. (2019). Machinability investigation of HSLA steel in hard turning with coated ceramic tool: assessment, modeling, optimization and economic aspects. Journal of Advanced Manufacturing Systems, 18(04), 625-655.

Das, A., Tirkey, N., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). A comparison of machinability in hard turning of EN-24 alloy steel under mist cooled and dry cutting environments with a coated cermet tool. Journal of Failure Analysis and Prevention, 19, 115-130.

Dixit, S. R., Das, S. R., & Dhupal, D. (2019). Parametric optimization of Nd: YAG laser microgrooving on aluminum oxide using integrated RSM-ANN-GA approach. Journal of Industrial Engineering International, 15, 333-349.

Anand, A., Behera, A. K., & Das, S. R. (2019). An overview on economic machining of hardened steels by hard turning and its process variables. Manufacturing Review, 6, 4.

DHUPAL, D., DIXIT, S. R., & DAS, S. R. (2018). Optimization of process parameters in laser microgrooving of alumina ceramic using genetic algorithm. UPB Sci. Bull., 80, 163-178.

Dhupal, D., Mohanty, S., Dixit, S. R., Das, S. R., & Nanda, B. K. (2018). Micromachining on Al-SiC based metal matrix composite using DPSS laser. Materials Today: Proceedings, 5(5), 11304-11318.

Dhupal, D., Naik, S., & Das, S. R. (2018). Modelling and optimization of Al–SiC MMC through EDM process using copper and brass electrodes. Materials Today: Proceedings, 5(5), 11295-11303.

Das, S. R., Panda, A., & Dhupal, D. (2018). Hard turning of AISI 4340 steel using coated carbide insert: Surface roughness, tool wear, chip morphology and cost estimation. Materials Today: Proceedings, 5(2), 6560-6569.

Nanda, B. K., Dhupal, D., Buda, D., & Das, S. R. (2018). Abrasive jet drilling of alumina ceramic with pressurized-fluidized bed set-up. Materials Today: Proceedings, 5(5), 12570-12578.

Panda, A., Das, S. R., & Dhupal, D. (2017). Surface roughness analysis for economical feasibility study of coated ceramic tool in hard turning operation. Process Integration and Optimization for Sustainability, 1, 237-249.

Das, S. R., Panda, A., & Dhupal, D. (2017). Experimental investigation of surface roughness, flank wear, chip morphology and cost estimation during machining of hardened AISI 4340 steel with coated carbide insert. Mechanics of Advanced Materials and Modern Processes, 3, 1-14.

Das, S. R., Kumar, A., & Dhupal, D. (2016). Experimental investigation on cutting force and surface roughness in machining of hardened AISI 52100 steel using cBN tool. International Journal of Machining and Machinability of Materials, 18(5-6), 501-521.

Das, S. R., Dhupal, D., & Kumar, A. (2015). Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts. Journal of Mechanical Science and Technology, 29, 4329-4340.

Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108-126.

Das, A., Das, S. R., Panda, A., & Patel, S. K. (2022). Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 236(5), 1889-1905.

Das, A., Padhan, S., & Das, S. R. (2022). Analysis on hole overcut during micro-EDM of Inconel 718. Materials Today: Proceedings, 56, 29-35.

Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2021). Analysis on surface integrity and sustainability assessment in electrical discharge machining of engineered Al-22% SiC metal matrix composite. Rev Metal, 57(4), e210.

Pradhan, S., Sahu, S., Das, S. R., & Dhupal, D. (2021). Experimental study and simulation of surface generation during machining of K-80 alumina ceramic in modified abrasive jet machining with different temperatures using Al2O3 abrasives. International Journal of Abrasive Technology, 10(4), 298-329.

Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2020). Experimental investigation on machining of hardstone quartz with modified AJM using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-22.

Panda, A., Das, S. R., Dhupal, D., & Davim, J. P. (2018). Hard turning of HSLA steel with coated ceramic tool based on evaluation of surface roughness, tool wear, chip morphology and economic analysis. Journal of Manufacturing Technology Research, 10(3/4), 113-141.

Panda, A., Das, S. R., & Dhupal, D. (2018). Experimental investigation, modelling and optimization in hard turning of high strength low alloy steel (AISI 4340). Matériaux & Techniques, 106(4), 404.

Das, S. R., Kumar, A., & Dhupal, D. (2015). Surface roughness analysis of hardened steel using TiN coated ceramic inserts. International Journal of Machining and Machinability of Materials, 17(1), 22-38.

Das, A., Padhan, S., Das, S. R., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2021). Performance assessment and chip morphology evaluation of austenitic stainless steel under sustainable machining conditions. Metals, 11(12), 1931.

Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2022). Electrical discharge machining of engineered Al-22% SiC metal matrix composite: surface roughness analysis, optimization, economic analysis, and sustainability assessment. Process Integration and Optimization for Sustainability, 1-29.

Behera, R. K., Samal, B. P., Panigrahi, S. C., Das, S. R., Mohamed, A., Muduli, K., ... & Das, R. (2022). Experimental analysis on machinability aspects of sintered aluminium metal matrix (Al+ Si+ Mg+ Cu+ SiC) composite-a novel product produced by powder metallurgy method. International Journal of Materials Engineering Innovation, 13(1), 1-22.

Das, A., Gautam, A., Panda, A., Das, S. R., Debnath, K., Ramakrishna, C., & Patel, S. K. (2022). Comparative performance evaluation between uncoated and TiAlN+ AlCrN coated carbide tools in hard turning of AISI H11 steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089221110430.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(2), 1009-1035.

Rout, B., Dash, R., Dhupal, D., & Das, S. R. (2022). Optimized posture prediction for task specific during stacking process using human upper body movements. International Journal on Interactive Design and Manufacturing (IJIDeM), 16(1), 291-303.

Das, A., Kamal, M., Das, S. R., Patel, S. K., Panda, A., Rafighi, M., & Biswal, B. B. (2022). Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(6), 3174-3197.

Padhan, S., Das, S. R., Das, A., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2022). Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials, 15(7), 2368.

Das, A., Gupta, M. K., Das, S. R., Panda, A., Patel, S. K., & Padhan, S. (2022). Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: comparative machinability investigation and sustainability assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(4), 138.

Rafighi, M., Özdemir, M., Das, A., & Das, S. R. (2022). Machinability investigation of cryogenically treated hardened AISI 4140 alloy steel using CBN insert under sustainable finish dry hard turning. Surface Review and Letters, 29(04), 2250047.

Das, A., Mohapatra, S., Gajrani, K. K., Das, S. R., & Patel, S. K. (2022). Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 09544054221111884.

Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., Somani, N., & Gupta, N. K. (2022). Machine Learning-based modeling and optimization in hard turning of AISI D6 steel with advanced AlTiSiN-coated carbide inserts to predict surface roughness and other machining characteristics. Surface Review and Letters, 29(10), 2250137.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Investigations on surface integrity in hard turning of functionally graded specimen under nano fluid assisted minimum quantity lubrication. Advances in Materials and Processing Technologies, 8(sup3), 1714-1729.

Rafighi, M., Özdemir, M., ?ahino?lu, A., Kumar, R., & Das, S. R. (2022). Experimental assessment and topsis optimization of cutting force, surface roughness, and sound intensity in hard turning of AISI 52100 steel. Surface Review and Letters, 29(11), 2250150.

Babu, M. N., Anandan, V., Parthasarathi, N. L., Yildirim, C. V., Babu, M. D., & Das, S. R. (2022). Performance analysis in turning of D3 tool steel using silver nanoplatelets as additives under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(12), 591.

Ibrahim, A. M. M., Omer, M. A., Das, S. R., Li, W., Alsoufi, M. S., & Elsheikh, A. (2022). Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using vegetable oil enriched with nano-additives. Alexandria Engineering Journal, 61(12), 10925-10938.

Kumar, N., Kumar, A., & Das, S. R. (2023). ELECTROCHEMICAL ARC DRILLING OF NICKEL–TITANIUM SHAPE MEMORY ALLOY USING MOLYBDENUM ELECTRODE: INVESTIGATION, MODELING AND OPTIMIZATION. Surface Review & Letters, 30(8).

Wagri, N. K., Jain, N. K., Petare, A., Das, S. R., Tharwan, M. Y., Alansari, A., ... & Elsheikh, A. (2023). Investigation on the performance of coated carbide tool during dry turning of AISI 4340 alloy steel. Materials, 16(2), 668.

Padhan, S., Wagri, N. K., Dash, L., Das, A., Das, S. R., Rafighi, M., & Sharma, P. (2023). Investigation on surface integrity in hard turning of AISI 4140 steel with SPPP-AlTiSiN coated carbide insert under nano-MQL. Lubricants, 11(2), 49.

Mahapatra, S., Das, A., Jena, P. C., & Das, S. R. (2023). Turning of hardened AISI H13 steel with recently developed S3P-AlTiSiN coated carbide tool using MWCNT mixed nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 237(4), 843-864.

Sharma, P., Soni, H., Sethy, S., Das, S. R., Tharwan, M. Y., Al Sofyani, S., ... & Elsheikh, A. (2023). Surface characterization of SAE 304 after WED cutting: An experimental investigation and optimization. Journal of Materials Research and Technology, 23, 5723-5732.

Mishra, P. C., Roychoudhury, A., Banerjee, A., Saha, N., Das, S. R., & Das, A. (2023). Coated Piston Ring Pack and Cylinder Liner Elastodynamics in Correlation to Piston Subsystem Elastohydrodynamic: Through FEA Modelling. Lubricants, 11(5), 192.

Pittala, R. K., Sharma, P., Anne, G., Patil, S., Varghese, V., Das, S. R., ... & Fernandes, F. (2023). Development and Mechanical Characterization of Ni-Cr Alloy Foam Using Ultrasonic-Assisted Electroplating Coating Technique. Coatings, 13(6), 1002.

Biswal, S., Das, S. R., Saha, N., & Mishra, P. C. (2023). Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environment, Development and Sustainability, 1-32. https://doi.org/10.1007/s10668-023-03752-6

Kumar, N., Kumar, A., Sethy, S., & Das, S. R. (2023). Investigation and optimization in electrochemical arc drilling of Ni55. 7Ti nickel–titanium shape memory alloy with molybdenum electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45(9), 448.

Somani, N., Walia, A. S., Gupta, N. K., Panda, J. P., Das, A., & Das, S. R. (2023). Data driven surrogate model-based optimization of the process parameters in electric discharge machining of D2 steel using Cu-SiC composite tool for the machined surface roughness and the tool wear. Revista de Metalurgia, 59(2), e242-e242.

Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). ANALYSIS ON POWER CONSUMPTION FOR LIFE CYCLE SUSTAINABILITY ASSESSMENT IN HARD TURNING OF AISI 4140 STEEL USING SPPPâ€” AlTiSiN-COATED CARBIDE TOOL UNDER VARIOUS CUTTING ENVIRONMENTS. Surface Review and Letters (SRL), 31(06), 1-26.

Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Investigation on Surface Roughness and Power Consumption for Sustainability Assessment in Hard Turning of HSLA Steel With SPPP?AlTiSiN–Coated Carbide Tool Under Various Cooling?Lubrications. Lubrication Science. https://doi.org/10.1002/ls.1717

Das, A., Barrenkala, D., Das, S. R., Patel, S. K., Somani, N., & Kumar, C. S. (2024). Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089231223021.

Dhupal, D., Panigrahi, D., Rout, S., Bhuyan, R. K., Nayak, S., Jena, P. C., & Das, S. R. (2024). Generation of effusion holes on ultra-high temperature alloy by micro electro-discharge machining process. Surface Review and Letters, 31(02), 2450015.

Padhan, S., Das, A., & Das, S. R. (2024). Analysis, modelling and optimization on tool vibration in machining of nitronic 60 with SiAlON ceramic tool. Advances in Materials and Processing Technologies, 1-14.

Roy, S., Das, A., Kumar, R., Das, S. R., Rafighi, M., & Sharma, P. (2024). Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on the performance and sustainability assessment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 09544054241229472.

Sethy, S., Rana, J., Sharma, P., & Das, S. R. (2024). Comparative performance investigation and sustainability assessment in electrical discharge machining of SS316 using different dielectrics. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238(7), 2718-2733.

Panda, D., Sahu, S. K., & Das, S. R. (2024). Comparative performance evaluation and economic assessment between traditional and vibration assisted EDM during machining of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 09544062241244949.

Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. (2024). Comparative performance investigation and sustainability evaluation between hot-AJM and AJM during machining of zirconia ceramic using Al2O3 abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46(5), 263.

Das, A., Kumar, A., Padhan, S., Das, S. R., Satpathy, M. P., & Patel, S. K. (2024). Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: comparative machining performance evaluation and economic assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46(5), 277.

Sethy, S., Das, S. R., Rana, J., Behera, A. K., & Gupta, M. K. (2024). Performance evaluation and economic assessment in electrical discharge machining of SS316 using graphite powder dispersed in biodegradable palm oil dielectric. Surface Review and Letters, 2450120.

Sarangi, S., Behera, A. K., Bajpai, S., Sahoo, S., Sethy, S., & Das, S. R. (2024). Application of tri-vector analysis to identify the optimum coating thickness in induced draft fans. Surface Review and Letters. https://doi.org/10.1142/S0218625X24501336

Parida, S. P., Mishra, D., Padhy, R. L., Jena, P. C., Das, S. R., Basem, A. A., ... & Elsheikh, A. (2024). Effect of Alkali Treatment on Mechanical and Buckling Behaviour of Natural Fiber Reinforced Composite Cylinder. ES Materials & Manufacturing, 24, 1161.

Parida, S. P., Jena, P. C., Das, S. R., Basem, A., Khatua, A. K., & Elsheikh, A. H. (2024). Transverse vibration of laminated-composite-plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 09544062241256589.

Elsheikh, A. H., Abd Elaziz, M., Das, S. R., Muthuramalingam, T., & Lu, S. (2021). A new optimized predictive model based on political optimizer for eco-friendly MQL-turning of AISI 4340 alloy with nano-lubricants. Journal of Manufacturing Processes, 67, 562-578.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Investigations on surface integrity in hard turning of functionally graded specimen under nano fluid assisted minimum quantity lubrication. Advances in Materials and Processing Technologies, 8(sup3), 1714-1729.

Parida, S. P., Jena, P. C., Das, S. R., Dhupal, D., & Dash, R. R. (2022). Comparative stress analysis of different suitable biomaterials for artificial hip joint and femur bone using finite element simulation. Advances in Materials and Processing Technologies, 8(sup3), 1741-1756.

Lalatendu Dash, Smita Padhan, Anshuman Das, Sudhansu Ranjan Das, “Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, doi:10.1177/0954406221993844 (2021). SCIE

Behera, R. K., Samal, B. P., Panigrahi, S. C., & Das, S. R. (2021). Optimization of erosion wears of Al–Mg–Si–Cu–SiC composite produced by the PM method. Corrosion Reviews, 39(1), 63-75.

Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2021). Machining of hardstone quartz with modified AJM process using hot SiC abrasives: analysis, modeling, optimization, and cost analysis. Surface Review and Letters, 28(02), 2050049.

Dash, L., Padhan, S., & Das, S. R. (2020). Design optimization for analysis of surface integrity and chip morphology in hard turning. Structural Engineering and Mechanics, An Int'l Journal, 76(5), 561-578.

Dash, L., Padhan, S., & Das, S. R. (2020). Experimental investigations on surface integrity and chip morphology in hard tuning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42(10), 500.

Pradhan, S., Das, S. R., & Dhupal, D. (2021). Performance evaluation of recently developed new process HAJM during machining hardstone quartz using hot silicon carbide abrasives: an experimental investigation and sustainability assessment. Silicon, 13(9), 2895-2919.

Padhan, S., Dash, L., Behera, S. K., & Das, S. R. (2020). Modeling and optimization of power consumption for economic analysis, energy-saving carbon footprint analysis, and sustainability assessment in finish hard turning under graphene nanoparticle–assisted minimum quantity lubrication. Process Integration and Optimization for Sustainability, 4, 445-463.

Naik, S., Das, S. R., & Dhupal, D. (2020). Analysis, predictive modelling and multi-response optimization in electrical discharge machining of Al-22% SiC metal matrix composite for minimization of surface roughness and hole overcut. Manufacturing Review, 7, 20.

Naik, S., Das, S. R., & Dhupal, D. (2021). Experimental investigation, predictive modeling, parametric optimization and cost analysis in electrical discharge machining of Al-SiC metal matrix composite. Silicon, 13, 1017-1040.

Panda, A., Das, S. R., & Dhupal, D. (2020). Machinability investigation and sustainability assessment in FDHT with coated ceramic tool. Steel and Composite Structures, An International Journal, 34(5), 681-698.

Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts. Mechanics & Industry, 21(1), 110.

Padhan, S., Das, A., Santoshwar, A., Dharmendrabhai, T. R., & Das, S. R. (2021). Sustainability assessment and machinability investigation of austenitic stainless steel in finish turning with advanced ultra-hard SiAlON ceramic tool under different cutting environments. Silicon, 13, 119-147.

Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2020). Performance evaluation of aluminium oxide nano particles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. Scientia Iranica, 27(6), 2838-2852.

Pradhan, S., Dhupal, D., Das, S. R., & Jena, P. C. (2021). Experimental investigation and optimization on machined surface of Si3N4 ceramic using hot SiC abrasive in HAJM. Materials Today: Proceedings, 44, 1877-1887.

Pradhan, S., Tripathy, S. S., Sahu, S., Das, S. R., Jena, P. C., & Dhupal, D. (2020). Investigation on MRR and DOC of the micro-holes generated on quartz using silicon carbide by FB-HAJM. Materials Today: Proceedings, 26, 2005-2012.

Behera, R. K., & Das, S. R. (2019). Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic. Matériaux & Techniques, 107(6), 603.

Das, A., Pradhan, O., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). Performance appraisal of various nanofluids during hard machining of AISI 4340 steel. Journal of Manufacturing Processes, 46, 248-270.

Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel. Machining Science and Technology, 24(2), 291-320.

Das, A., Patel, S. K., & Das, S. R. (2019). Performance comparison of vegetable oil based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication. Mechanics & Industry, 20(5), 506.

Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryo treated cermet inserts. Journal of Superhard Materials, 41, 247-264.

Panda, A., Ranjan Das, S., & Dhupal, D. (2019). Machinability investigation of HSLA steel in hard turning with coated ceramic tool: assessment, modeling, optimization and economic aspects. Journal of Advanced Manufacturing Systems, 18(04), 625-655.

Das, A., Tirkey, N., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). A comparison of machinability in hard turning of EN-24 alloy steel under mist cooled and dry cutting environments with a coated cermet tool. Journal of Failure Analysis and Prevention, 19, 115-130.

Dixit, S. R., Das, S. R., & Dhupal, D. (2019). Parametric optimization of Nd: YAG laser microgrooving on aluminum oxide using integrated RSM-ANN-GA approach. Journal of Industrial Engineering International, 15, 333-349.

Anand, A., Behera, A. K., & Das, S. R. (2019). An overview on economic machining of hardened steels by hard turning and its process variables. Manufacturing Review, 6, 4.

DHUPAL, D., DIXIT, S. R., & DAS, S. R. (2018). Optimization of process parameters in laser microgrooving of alumina ceramic using genetic algorithm. UPB Sci. Bull., 80, 163-178.

Dhupal, D., Mohanty, S., Dixit, S. R., Das, S. R., & Nanda, B. K. (2018). Micromachining on Al-SiC based metal matrix composite using DPSS laser. Materials Today: Proceedings, 5(5), 11304-11318.

Dhupal, D., Naik, S., & Das, S. R. (2018). Modelling and optimization of Al–SiC MMC through EDM process using copper and brass electrodes. Materials Today: Proceedings, 5(5), 11295-11303.

Das, S. R., Panda, A., & Dhupal, D. (2018). Hard turning of AISI 4340 steel using coated carbide insert: Surface roughness, tool wear, chip morphology and cost estimation. Materials Today: Proceedings, 5(2), 6560-6569.

Nanda, B. K., Dhupal, D., Buda, D., & Das, S. R. (2018). Abrasive jet drilling of alumina ceramic with pressurized-fluidized bed set-up. Materials Today: Proceedings, 5(5), 12570-12578.

Panda, A., Das, S. R., & Dhupal, D. (2017). Surface roughness analysis for economical feasibility study of coated ceramic tool in hard turning operation. Process Integration and Optimization for Sustainability, 1, 237-249.

Das, S. R., Panda, A., & Dhupal, D. (2017). Experimental investigation of surface roughness, flank wear, chip morphology and cost estimation during machining of hardened AISI 4340 steel with coated carbide insert. Mechanics of Advanced Materials and Modern Processes, 3, 1-14.

Das, S. R., Kumar, A., & Dhupal, D. (2016). Experimental investigation on cutting force and surface roughness in machining of hardened AISI 52100 steel using cBN tool. International Journal of Machining and Machinability of Materials, 18(5-6), 501-521.

Das, S. R., Dhupal, D., & Kumar, A. (2015). Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts. Journal of Mechanical Science and Technology, 29, 4329-4340.

Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108-126.

Das, A., Das, S. R., Panda, A., & Patel, S. K. (2022). Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 236(5), 1889-1905.

Das, A., Padhan, S., & Das, S. R. (2022). Analysis on hole overcut during micro-EDM of Inconel 718. Materials Today: Proceedings, 56, 29-35.

Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2021). Analysis on surface integrity and sustainability assessment in electrical discharge machining of engineered Al-22% SiC metal matrix composite. Rev Metal, 57(4), e210.

Pradhan, S., Sahu, S., Das, S. R., & Dhupal, D. (2021). Experimental study and simulation of surface generation during machining of K-80 alumina ceramic in modified abrasive jet machining with different temperatures using Al2O3 abrasives. International Journal of Abrasive Technology, 10(4), 298-329.

Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2020). Experimental investigation on machining of hardstone quartz with modified AJM using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-22.

Panda, A., Das, S. R., Dhupal, D., & Davim, J. P. (2018). Hard turning of HSLA steel with coated ceramic tool based on evaluation of surface roughness, tool wear, chip morphology and economic analysis. Journal of Manufacturing Technology Research, 10(3/4), 113-141.

Panda, A., Das, S. R., & Dhupal, D. (2018). Experimental investigation, modelling and optimization in hard turning of high strength low alloy steel (AISI 4340). Matériaux & Techniques, 106(4), 404.

Das, S. R., Kumar, A., & Dhupal, D. (2015). Surface roughness analysis of hardened steel using TiN coated ceramic inserts. International Journal of Machining and Machinability of Materials, 17(1), 22-38.

Das, A., Padhan, S., Das, S. R., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2021). Performance assessment and chip morphology evaluation of austenitic stainless steel under sustainable machining conditions. Metals, 11(12), 1931.

Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2022). Electrical discharge machining of engineered Al-22% SiC metal matrix composite: surface roughness analysis, optimization, economic analysis, and sustainability assessment. Process Integration and Optimization for Sustainability, 1-29.

Behera, R. K., Samal, B. P., Panigrahi, S. C., Das, S. R., Mohamed, A., Muduli, K., ... & Das, R. (2022). Experimental analysis on machinability aspects of sintered aluminium metal matrix (Al+ Si+ Mg+ Cu+ SiC) composite-a novel product produced by powder metallurgy method. International Journal of Materials Engineering Innovation, 13(1), 1-22.

Das, A., Gautam, A., Panda, A., Das, S. R., Debnath, K., Ramakrishna, C., & Patel, S. K. (2022). Comparative performance evaluation between uncoated and TiAlN+ AlCrN coated carbide tools in hard turning of AISI H11 steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089221110430.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(2), 1009-1035.

Rout, B., Dash, R., Dhupal, D., & Das, S. R. (2022). Optimized posture prediction for task specific during stacking process using human upper body movements. International Journal on Interactive Design and Manufacturing (IJIDeM), 16(1), 291-303.

Das, A., Kamal, M., Das, S. R., Patel, S. K., Panda, A., Rafighi, M., & Biswal, B. B. (2022). Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(6), 3174-3197.

Padhan, S., Das, S. R., Das, A., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2022). Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials, 15(7), 2368.

Das, A., Gupta, M. K., Das, S. R., Panda, A., Patel, S. K., & Padhan, S. (2022). Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: comparative machinability investigation and sustainability assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(4), 138.

Rafighi, M., Özdemir, M., Das, A., & Das, S. R. (2022). Machinability investigation of cryogenically treated hardened AISI 4140 alloy steel using CBN insert under sustainable finish dry hard turning. Surface Review and Letters, 29(04), 2250047.

Das, A., Mohapatra, S., Gajrani, K. K., Das, S. R., & Patel, S. K. (2022). Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 09544054221111884.

Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., Somani, N., & Gupta, N. K. (2022). Machine Learning-based modeling and optimization in hard turning of AISI D6 steel with advanced AlTiSiN-coated carbide inserts to predict surface roughness and other machining characteristics. Surface Review and Letters, 29(10), 2250137.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Investigations on surface integrity in hard turning of functionally graded specimen under nano fluid assisted minimum quantity lubrication. Advances in Materials and Processing Technologies, 8(sup3), 1714-1729.

Rafighi, M., Özdemir, M., ?ahino?lu, A., Kumar, R., & Das, S. R. (2022). Experimental assessment and topsis optimization of cutting force, surface roughness, and sound intensity in hard turning of AISI 52100 steel. Surface Review and Letters, 29(11), 2250150.

Babu, M. N., Anandan, V., Parthasarathi, N. L., Yildirim, C. V., Babu, M. D., & Das, S. R. (2022). Performance analysis in turning of D3 tool steel using silver nanoplatelets as additives under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(12), 591.

Ibrahim, A. M. M., Omer, M. A., Das, S. R., Li, W., Alsoufi, M. S., & Elsheikh, A. (2022). Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using vegetable oil enriched with nano-additives. Alexandria Engineering Journal, 61(12), 10925-10938.

Kumar, N., Kumar, A., & Das, S. R. (2023). ELECTROCHEMICAL ARC DRILLING OF NICKEL–TITANIUM SHAPE MEMORY ALLOY USING MOLYBDENUM ELECTRODE: INVESTIGATION, MODELING AND OPTIMIZATION. Surface Review & Letters, 30(8).

Wagri, N. K., Jain, N. K., Petare, A., Das, S. R., Tharwan, M. Y., Alansari, A., ... & Elsheikh, A. (2023). Investigation on the performance of coated carbide tool during dry turning of AISI 4340 alloy steel. Materials, 16(2), 668.

Padhan, S., Wagri, N. K., Dash, L., Das, A., Das, S. R., Rafighi, M., & Sharma, P. (2023). Investigation on surface integrity in hard turning of AISI 4140 steel with SPPP-AlTiSiN coated carbide insert under nano-MQL. Lubricants, 11(2), 49.

Mahapatra, S., Das, A., Jena, P. C., & Das, S. R. (2023). Turning of hardened AISI H13 steel with recently developed S3P-AlTiSiN coated carbide tool using MWCNT mixed nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 237(4), 843-864.

Sharma, P., Soni, H., Sethy, S., Das, S. R., Tharwan, M. Y., Al Sofyani, S., ... & Elsheikh, A. (2023). Surface characterization of SAE 304 after WED cutting: An experimental investigation and optimization. Journal of Materials Research and Technology, 23, 5723-5732.

Mishra, P. C., Roychoudhury, A., Banerjee, A., Saha, N., Das, S. R., & Das, A. (2023). Coated Piston Ring Pack and Cylinder Liner Elastodynamics in Correlation to Piston Subsystem Elastohydrodynamic: Through FEA Modelling. Lubricants, 11(5), 192.

Pittala, R. K., Sharma, P., Anne, G., Patil, S., Varghese, V., Das, S. R., ... & Fernandes, F. (2023). Development and Mechanical Characterization of Ni-Cr Alloy Foam Using Ultrasonic-Assisted Electroplating Coating Technique. Coatings, 13(6), 1002.

Biswal, S., Das, S. R., Saha, N., & Mishra, P. C. (2023). Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environment, Development and Sustainability, 1-32. https://doi.org/10.1007/s10668-023-03752-6

Kumar, N., Kumar, A., Sethy, S., & Das, S. R. (2023). Investigation and optimization in electrochemical arc drilling of Ni55. 7Ti nickel–titanium shape memory alloy with molybdenum electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45(9), 448.

Somani, N., Walia, A. S., Gupta, N. K., Panda, J. P., Das, A., & Das, S. R. (2023). Data driven surrogate model-based optimization of the process parameters in electric discharge machining of D2 steel using Cu-SiC composite tool for the machined surface roughness and the tool wear. Revista de Metalurgia, 59(2), e242-e242.

Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). ANALYSIS ON POWER CONSUMPTION FOR LIFE CYCLE SUSTAINABILITY ASSESSMENT IN HARD TURNING OF AISI 4140 STEEL USING SPPPâ€” AlTiSiN-COATED CARBIDE TOOL UNDER VARIOUS CUTTING ENVIRONMENTS. Surface Review and Letters (SRL), 31(06), 1-26.

Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Investigation on Surface Roughness and Power Consumption for Sustainability Assessment in Hard Turning of HSLA Steel With SPPP?AlTiSiN–Coated Carbide Tool Under Various Cooling?Lubrications. Lubrication Science. https://doi.org/10.1002/ls.1717

Das, A., Barrenkala, D., Das, S. R., Patel, S. K., Somani, N., & Kumar, C. S. (2024). Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089231223021.

Dhupal, D., Panigrahi, D., Rout, S., Bhuyan, R. K., Nayak, S., Jena, P. C., & Das, S. R. (2024). Generation of effusion holes on ultra-high temperature alloy by micro electro-discharge machining process. Surface Review and Letters, 31(02), 2450015.

Padhan, S., Das, A., & Das, S. R. (2024). Analysis, modelling and optimization on tool vibration in machining of nitronic 60 with SiAlON ceramic tool. Advances in Materials and Processing Technologies, 1-14.

Roy, S., Das, A., Kumar, R., Das, S. R., Rafighi, M., & Sharma, P. (2024). Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on the performance and sustainability assessment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 09544054241229472.

Sethy, S., Rana, J., Sharma, P., & Das, S. R. (2024). Comparative performance investigation and sustainability assessment in electrical discharge machining of SS316 using different dielectrics. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238(7), 2718-2733.

Panda, D., Sahu, S. K., & Das, S. R. (2024). Comparative performance evaluation and economic assessment between traditional and vibration assisted EDM during machining of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 09544062241244949.

Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. (2024). Comparative performance investigation and sustainability evaluation between hot-AJM and AJM during machining of zirconia ceramic using Al2O3 abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46(5), 263.

Das, A., Kumar, A., Padhan, S., Das, S. R., Satpathy, M. P., & Patel, S. K. (2024). Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: comparative machining performance evaluation and economic assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46(5), 277.

Sethy, S., Das, S. R., Rana, J., Behera, A. K., & Gupta, M. K. (2024). Performance evaluation and economic assessment in electrical discharge machining of SS316 using graphite powder dispersed in biodegradable palm oil dielectric. Surface Review and Letters, 2450120.

Sarangi, S., Behera, A. K., Bajpai, S., Sahoo, S., Sethy, S., & Das, S. R. (2024). Application of tri-vector analysis to identify the optimum coating thickness in induced draft fans. Surface Review and Letters. https://doi.org/10.1142/S0218625X24501336

Parida, S. P., Mishra, D., Padhy, R. L., Jena, P. C., Das, S. R., Basem, A. A., ... & Elsheikh, A. (2024). Effect of Alkali Treatment on Mechanical and Buckling Behaviour of Natural Fiber Reinforced Composite Cylinder. ES Materials & Manufacturing, 24, 1161.

Parida, S. P., Jena, P. C., Das, S. R., Basem, A., Khatua, A. K., & Elsheikh, A. H. (2024). Transverse vibration of laminated-composite-plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 09544062241256589.

Elsheikh, A. H., Abd Elaziz, M., Das, S. R., Muthuramalingam, T., & Lu, S. (2021). A new optimized predictive model based on political optimizer for eco-friendly MQL-turning of AISI 4340 alloy with nano-lubricants. Journal of Manufacturing Processes, 67, 562-578.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Investigations on surface integrity in hard turning of functionally graded specimen under nano fluid assisted minimum quantity lubrication. Advances in Materials and Processing Technologies, 8(sup3), 1714-1729.

Parida, S. P., Jena, P. C., Das, S. R., Dhupal, D., & Dash, R. R. (2022). Comparative stress analysis of different suitable biomaterials for artificial hip joint and femur bone using finite element simulation. Advances in Materials and Processing Technologies, 8(sup3), 1741-1756.

Lalatendu Dash, Smita Padhan, Anshuman Das, Sudhansu Ranjan Das, “Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, doi:10.1177/0954406221993844 (2021). SCIE

Behera, R. K., Samal, B. P., Panigrahi, S. C., & Das, S. R. (2021). Optimization of erosion wears of Al–Mg–Si–Cu–SiC composite produced by the PM method. Corrosion Reviews, 39(1), 63-75.

Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2021). Machining of hardstone quartz with modified AJM process using hot SiC abrasives: analysis, modeling, optimization, and cost analysis. Surface Review and Letters, 28(02), 2050049.

Dash, L., Padhan, S., & Das, S. R. (2020). Design optimization for analysis of surface integrity and chip morphology in hard turning. Structural Engineering and Mechanics, An Int'l Journal, 76(5), 561-578.

Dash, L., Padhan, S., & Das, S. R. (2020). Experimental investigations on surface integrity and chip morphology in hard tuning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42(10), 500.

Pradhan, S., Das, S. R., & Dhupal, D. (2021). Performance evaluation of recently developed new process HAJM during machining hardstone quartz using hot silicon carbide abrasives: an experimental investigation and sustainability assessment. Silicon, 13(9), 2895-2919.

Padhan, S., Dash, L., Behera, S. K., & Das, S. R. (2020). Modeling and optimization of power consumption for economic analysis, energy-saving carbon footprint analysis, and sustainability assessment in finish hard turning under graphene nanoparticle–assisted minimum quantity lubrication. Process Integration and Optimization for Sustainability, 4, 445-463.

Naik, S., Das, S. R., & Dhupal, D. (2020). Analysis, predictive modelling and multi-response optimization in electrical discharge machining of Al-22% SiC metal matrix composite for minimization of surface roughness and hole overcut. Manufacturing Review, 7, 20.

Naik, S., Das, S. R., & Dhupal, D. (2021). Experimental investigation, predictive modeling, parametric optimization and cost analysis in electrical discharge machining of Al-SiC metal matrix composite. Silicon, 13, 1017-1040.

Panda, A., Das, S. R., & Dhupal, D. (2020). Machinability investigation and sustainability assessment in FDHT with coated ceramic tool. Steel and Composite Structures, An International Journal, 34(5), 681-698.

Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts. Mechanics & Industry, 21(1), 110.

Padhan, S., Das, A., Santoshwar, A., Dharmendrabhai, T. R., & Das, S. R. (2021). Sustainability assessment and machinability investigation of austenitic stainless steel in finish turning with advanced ultra-hard SiAlON ceramic tool under different cutting environments. Silicon, 13, 119-147.

Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2020). Performance evaluation of aluminium oxide nano particles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. Scientia Iranica, 27(6), 2838-2852.

Pradhan, S., Dhupal, D., Das, S. R., & Jena, P. C. (2021). Experimental investigation and optimization on machined surface of Si3N4 ceramic using hot SiC abrasive in HAJM. Materials Today: Proceedings, 44, 1877-1887.

Pradhan, S., Tripathy, S. S., Sahu, S., Das, S. R., Jena, P. C., & Dhupal, D. (2020). Investigation on MRR and DOC of the micro-holes generated on quartz using silicon carbide by FB-HAJM. Materials Today: Proceedings, 26, 2005-2012.

Behera, R. K., & Das, S. R. (2019). Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic. Matériaux & Techniques, 107(6), 603.

Das, A., Pradhan, O., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). Performance appraisal of various nanofluids during hard machining of AISI 4340 steel. Journal of Manufacturing Processes, 46, 248-270.

Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel. Machining Science and Technology, 24(2), 291-320.

Das, A., Patel, S. K., & Das, S. R. (2019). Performance comparison of vegetable oil based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication. Mechanics & Industry, 20(5), 506.

Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryo treated cermet inserts. Journal of Superhard Materials, 41, 247-264.

Panda, A., Ranjan Das, S., & Dhupal, D. (2019). Machinability investigation of HSLA steel in hard turning with coated ceramic tool: assessment, modeling, optimization and economic aspects. Journal of Advanced Manufacturing Systems, 18(04), 625-655.

Das, A., Tirkey, N., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). A comparison of machinability in hard turning of EN-24 alloy steel under mist cooled and dry cutting environments with a coated cermet tool. Journal of Failure Analysis and Prevention, 19, 115-130.

Dixit, S. R., Das, S. R., & Dhupal, D. (2019). Parametric optimization of Nd: YAG laser microgrooving on aluminum oxide using integrated RSM-ANN-GA approach. Journal of Industrial Engineering International, 15, 333-349.

Anand, A., Behera, A. K., & Das, S. R. (2019). An overview on economic machining of hardened steels by hard turning and its process variables. Manufacturing Review, 6, 4.

DHUPAL, D., DIXIT, S. R., & DAS, S. R. (2018). Optimization of process parameters in laser microgrooving of alumina ceramic using genetic algorithm. UPB Sci. Bull., 80, 163-178.

Dhupal, D., Mohanty, S., Dixit, S. R., Das, S. R., & Nanda, B. K. (2018). Micromachining on Al-SiC based metal matrix composite using DPSS laser. Materials Today: Proceedings, 5(5), 11304-11318.

Dhupal, D., Naik, S., & Das, S. R. (2018). Modelling and optimization of Al–SiC MMC through EDM process using copper and brass electrodes. Materials Today: Proceedings, 5(5), 11295-11303.

Das, S. R., Panda, A., & Dhupal, D. (2018). Hard turning of AISI 4340 steel using coated carbide insert: Surface roughness, tool wear, chip morphology and cost estimation. Materials Today: Proceedings, 5(2), 6560-6569.

Nanda, B. K., Dhupal, D., Buda, D., & Das, S. R. (2018). Abrasive jet drilling of alumina ceramic with pressurized-fluidized bed set-up. Materials Today: Proceedings, 5(5), 12570-12578.

Panda, A., Das, S. R., & Dhupal, D. (2017). Surface roughness analysis for economical feasibility study of coated ceramic tool in hard turning operation. Process Integration and Optimization for Sustainability, 1, 237-249.

Das, S. R., Panda, A., & Dhupal, D. (2017). Experimental investigation of surface roughness, flank wear, chip morphology and cost estimation during machining of hardened AISI 4340 steel with coated carbide insert. Mechanics of Advanced Materials and Modern Processes, 3, 1-14.

Das, S. R., Kumar, A., & Dhupal, D. (2016). Experimental investigation on cutting force and surface roughness in machining of hardened AISI 52100 steel using cBN tool. International Journal of Machining and Machinability of Materials, 18(5-6), 501-521.

Das, S. R., Dhupal, D., & Kumar, A. (2015). Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts. Journal of Mechanical Science and Technology, 29, 4329-4340.

Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108-126.

Das, A., Das, S. R., Panda, A., & Patel, S. K. (2022). Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 236(5), 1889-1905.

Das, A., Padhan, S., & Das, S. R. (2022). Analysis on hole overcut during micro-EDM of Inconel 718. Materials Today: Proceedings, 56, 29-35.

Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2021). Analysis on surface integrity and sustainability assessment in electrical discharge machining of engineered Al-22% SiC metal matrix composite. Rev Metal, 57(4), e210.

Pradhan, S., Sahu, S., Das, S. R., & Dhupal, D. (2021). Experimental study and simulation of surface generation during machining of K-80 alumina ceramic in modified abrasive jet machining with different temperatures using Al2O3 abrasives. International Journal of Abrasive Technology, 10(4), 298-329.

Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2020). Experimental investigation on machining of hardstone quartz with modified AJM using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-22.

Panda, A., Das, S. R., Dhupal, D., & Davim, J. P. (2018). Hard turning of HSLA steel with coated ceramic tool based on evaluation of surface roughness, tool wear, chip morphology and economic analysis. Journal of Manufacturing Technology Research, 10(3/4), 113-141.

Panda, A., Das, S. R., & Dhupal, D. (2018). Experimental investigation, modelling and optimization in hard turning of high strength low alloy steel (AISI 4340). Matériaux & Techniques, 106(4), 404.

Das, S. R., Kumar, A., & Dhupal, D. (2015). Surface roughness analysis of hardened steel using TiN coated ceramic inserts. International Journal of Machining and Machinability of Materials, 17(1), 22-38.

Das, A., Padhan, S., Das, S. R., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2021). Performance assessment and chip morphology evaluation of austenitic stainless steel under sustainable machining conditions. Metals, 11(12), 1931.

Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2022). Electrical discharge machining of engineered Al-22% SiC metal matrix composite: surface roughness analysis, optimization, economic analysis, and sustainability assessment. Process Integration and Optimization for Sustainability, 1-29.

Behera, R. K., Samal, B. P., Panigrahi, S. C., Das, S. R., Mohamed, A., Muduli, K., ... & Das, R. (2022). Experimental analysis on machinability aspects of sintered aluminium metal matrix (Al+ Si+ Mg+ Cu+ SiC) composite-a novel product produced by powder metallurgy method. International Journal of Materials Engineering Innovation, 13(1), 1-22.

Das, A., Gautam, A., Panda, A., Das, S. R., Debnath, K., Ramakrishna, C., & Patel, S. K. (2022). Comparative performance evaluation between uncoated and TiAlN+ AlCrN coated carbide tools in hard turning of AISI H11 steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089221110430.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(2), 1009-1035.

Rout, B., Dash, R., Dhupal, D., & Das, S. R. (2022). Optimized posture prediction for task specific during stacking process using human upper body movements. International Journal on Interactive Design and Manufacturing (IJIDeM), 16(1), 291-303.

Das, A., Kamal, M., Das, S. R., Patel, S. K., Panda, A., Rafighi, M., & Biswal, B. B. (2022). Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(6), 3174-3197.

Padhan, S., Das, S. R., Das, A., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2022). Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials, 15(7), 2368.

Das, A., Gupta, M. K., Das, S. R., Panda, A., Patel, S. K., & Padhan, S. (2022). Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: comparative machinability investigation and sustainability assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(4), 138.

Rafighi, M., Özdemir, M., Das, A., & Das, S. R. (2022). Machinability investigation of cryogenically treated hardened AISI 4140 alloy steel using CBN insert under sustainable finish dry hard turning. Surface Review and Letters, 29(04), 2250047.

Das, A., Mohapatra, S., Gajrani, K. K., Das, S. R., & Patel, S. K. (2022). Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 09544054221111884.

Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., Somani, N., & Gupta, N. K. (2022). Machine Learning-based modeling and optimization in hard turning of AISI D6 steel with advanced AlTiSiN-coated carbide inserts to predict surface roughness and other machining characteristics. Surface Review and Letters, 29(10), 2250137.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Investigations on surface integrity in hard turning of functionally graded specimen under nano fluid assisted minimum quantity lubrication. Advances in Materials and Processing Technologies, 8(sup3), 1714-1729.

Rafighi, M., Özdemir, M., ?ahino?lu, A., Kumar, R., & Das, S. R. (2022). Experimental assessment and topsis optimization of cutting force, surface roughness, and sound intensity in hard turning of AISI 52100 steel. Surface Review and Letters, 29(11), 2250150.

Babu, M. N., Anandan, V., Parthasarathi, N. L., Yildirim, C. V., Babu, M. D., & Das, S. R. (2022). Performance analysis in turning of D3 tool steel using silver nanoplatelets as additives under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(12), 591.

Ibrahim, A. M. M., Omer, M. A., Das, S. R., Li, W., Alsoufi, M. S., & Elsheikh, A. (2022). Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using vegetable oil enriched with nano-additives. Alexandria Engineering Journal, 61(12), 10925-10938.

Kumar, N., Kumar, A., & Das, S. R. (2023). ELECTROCHEMICAL ARC DRILLING OF NICKEL–TITANIUM SHAPE MEMORY ALLOY USING MOLYBDENUM ELECTRODE: INVESTIGATION, MODELING AND OPTIMIZATION. Surface Review & Letters, 30(8).

Wagri, N. K., Jain, N. K., Petare, A., Das, S. R., Tharwan, M. Y., Alansari, A., ... & Elsheikh, A. (2023). Investigation on the performance of coated carbide tool during dry turning of AISI 4340 alloy steel. Materials, 16(2), 668.

Padhan, S., Wagri, N. K., Dash, L., Das, A., Das, S. R., Rafighi, M., & Sharma, P. (2023). Investigation on surface integrity in hard turning of AISI 4140 steel with SPPP-AlTiSiN coated carbide insert under nano-MQL. Lubricants, 11(2), 49.

Mahapatra, S., Das, A., Jena, P. C., & Das, S. R. (2023). Turning of hardened AISI H13 steel with recently developed S3P-AlTiSiN coated carbide tool using MWCNT mixed nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 237(4), 843-864.

Sharma, P., Soni, H., Sethy, S., Das, S. R., Tharwan, M. Y., Al Sofyani, S., ... & Elsheikh, A. (2023). Surface characterization of SAE 304 after WED cutting: An experimental investigation and optimization. Journal of Materials Research and Technology, 23, 5723-5732.

Mishra, P. C., Roychoudhury, A., Banerjee, A., Saha, N., Das, S. R., & Das, A. (2023). Coated Piston Ring Pack and Cylinder Liner Elastodynamics in Correlation to Piston Subsystem Elastohydrodynamic: Through FEA Modelling. Lubricants, 11(5), 192.

Pittala, R. K., Sharma, P., Anne, G., Patil, S., Varghese, V., Das, S. R., ... & Fernandes, F. (2023). Development and Mechanical Characterization of Ni-Cr Alloy Foam Using Ultrasonic-Assisted Electroplating Coating Technique. Coatings, 13(6), 1002.

Biswal, S., Das, S. R., Saha, N., & Mishra, P. C. (2023). Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environment, Development and Sustainability, 1-32. https://doi.org/10.1007/s10668-023-03752-6

Kumar, N., Kumar, A., Sethy, S., & Das, S. R. (2023). Investigation and optimization in electrochemical arc drilling of Ni55. 7Ti nickel–titanium shape memory alloy with molybdenum electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45(9), 448.

Somani, N., Walia, A. S., Gupta, N. K., Panda, J. P., Das, A., & Das, S. R. (2023). Data driven surrogate model-based optimization of the process parameters in electric discharge machining of D2 steel using Cu-SiC composite tool for the machined surface roughness and the tool wear. Revista de Metalurgia, 59(2), e242-e242.

Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). ANALYSIS ON POWER CONSUMPTION FOR LIFE CYCLE SUSTAINABILITY ASSESSMENT IN HARD TURNING OF AISI 4140 STEEL USING SPPPâ€” AlTiSiN-COATED CARBIDE TOOL UNDER VARIOUS CUTTING ENVIRONMENTS. Surface Review and Letters (SRL), 31(06), 1-26.

Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Investigation on Surface Roughness and Power Consumption for Sustainability Assessment in Hard Turning of HSLA Steel With SPPP?AlTiSiN–Coated Carbide Tool Under Various Cooling?Lubrications. Lubrication Science. https://doi.org/10.1002/ls.1717

Das, A., Barrenkala, D., Das, S. R., Patel, S. K., Somani, N., & Kumar, C. S. (2024). Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089231223021.

Dhupal, D., Panigrahi, D., Rout, S., Bhuyan, R. K., Nayak, S., Jena, P. C., & Das, S. R. (2024). Generation of effusion holes on ultra-high temperature alloy by micro electro-discharge machining process. Surface Review and Letters, 31(02), 2450015.

Padhan, S., Das, A., & Das, S. R. (2024). Analysis, modelling and optimization on tool vibration in machining of nitronic 60 with SiAlON ceramic tool. Advances in Materials and Processing Technologies, 1-14.

Roy, S., Das, A., Kumar, R., Das, S. R., Rafighi, M., & Sharma, P. (2024). Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on the performance and sustainability assessment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 09544054241229472.

Sethy, S., Rana, J., Sharma, P., & Das, S. R. (2024). Comparative performance investigation and sustainability assessment in electrical discharge machining of SS316 using different dielectrics. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238(7), 2718-2733.

Panda, D., Sahu, S. K., & Das, S. R. (2024). Comparative performance evaluation and economic assessment between traditional and vibration assisted EDM during machining of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 09544062241244949.

Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. (2024). Comparative performance investigation and sustainability evaluation between hot-AJM and AJM during machining of zirconia ceramic using Al2O3 abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46(5), 263.

Das, A., Kumar, A., Padhan, S., Das, S. R., Satpathy, M. P., & Patel, S. K. (2024). Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: comparative machining performance evaluation and economic assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46(5), 277.

Sethy, S., Das, S. R., Rana, J., Behera, A. K., & Gupta, M. K. (2024). Performance evaluation and economic assessment in electrical discharge machining of SS316 using graphite powder dispersed in biodegradable palm oil dielectric. Surface Review and Letters, 2450120.

Sarangi, S., Behera, A. K., Bajpai, S., Sahoo, S., Sethy, S., & Das, S. R. (2024). Application of tri-vector analysis to identify the optimum coating thickness in induced draft fans. Surface Review and Letters. https://doi.org/10.1142/S0218625X24501336

Parida, S. P., Mishra, D., Padhy, R. L., Jena, P. C., Das, S. R., Basem, A. A., ... & Elsheikh, A. (2024). Effect of Alkali Treatment on Mechanical and Buckling Behaviour of Natural Fiber Reinforced Composite Cylinder. ES Materials & Manufacturing, 24, 1161.

Parida, S. P., Jena, P. C., Das, S. R., Basem, A., Khatua, A. K., & Elsheikh, A. H. (2024). Transverse vibration of laminated-composite-plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 09544062241256589.

Elsheikh, A. H., Abd Elaziz, M., Das, S. R., Muthuramalingam, T., & Lu, S. (2021). A new optimized predictive model based on political optimizer for eco-friendly MQL-turning of AISI 4340 alloy with nano-lubricants. Journal of Manufacturing Processes, 67, 562-578.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Investigations on surface integrity in hard turning of functionally graded specimen under nano fluid assisted minimum quantity lubrication. Advances in Materials and Processing Technologies, 8(sup3), 1714-1729.

Parida, S. P., Jena, P. C., Das, S. R., Dhupal, D., & Dash, R. R. (2022). Comparative stress analysis of different suitable biomaterials for artificial hip joint and femur bone using finite element simulation. Advances in Materials and Processing Technologies, 8(sup3), 1741-1756.

Lalatendu Dash, Smita Padhan, Anshuman Das, Sudhansu Ranjan Das, “Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, doi:10.1177/0954406221993844 (2021). SCIE

Behera, R. K., Samal, B. P., Panigrahi, S. C., & Das, S. R. (2021). Optimization of erosion wears of Al–Mg–Si–Cu–SiC composite produced by the PM method. Corrosion Reviews, 39(1), 63-75.

Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2021). Machining of hardstone quartz with modified AJM process using hot SiC abrasives: analysis, modeling, optimization, and cost analysis. Surface Review and Letters, 28(02), 2050049.

Dash, L., Padhan, S., & Das, S. R. (2020). Design optimization for analysis of surface integrity and chip morphology in hard turning. Structural Engineering and Mechanics, An Int'l Journal, 76(5), 561-578.

Dash, L., Padhan, S., & Das, S. R. (2020). Experimental investigations on surface integrity and chip morphology in hard tuning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42(10), 500.

Pradhan, S., Das, S. R., & Dhupal, D. (2021). Performance evaluation of recently developed new process HAJM during machining hardstone quartz using hot silicon carbide abrasives: an experimental investigation and sustainability assessment. Silicon, 13(9), 2895-2919.

Padhan, S., Dash, L., Behera, S. K., & Das, S. R. (2020). Modeling and optimization of power consumption for economic analysis, energy-saving carbon footprint analysis, and sustainability assessment in finish hard turning under graphene nanoparticle–assisted minimum quantity lubrication. Process Integration and Optimization for Sustainability, 4, 445-463.

Naik, S., Das, S. R., & Dhupal, D. (2020). Analysis, predictive modelling and multi-response optimization in electrical discharge machining of Al-22% SiC metal matrix composite for minimization of surface roughness and hole overcut. Manufacturing Review, 7, 20.

Naik, S., Das, S. R., & Dhupal, D. (2021). Experimental investigation, predictive modeling, parametric optimization and cost analysis in electrical discharge machining of Al-SiC metal matrix composite. Silicon, 13, 1017-1040.

Panda, A., Das, S. R., & Dhupal, D. (2020). Machinability investigation and sustainability assessment in FDHT with coated ceramic tool. Steel and Composite Structures, An International Journal, 34(5), 681-698.

Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts. Mechanics & Industry, 21(1), 110.

Padhan, S., Das, A., Santoshwar, A., Dharmendrabhai, T. R., & Das, S. R. (2021). Sustainability assessment and machinability investigation of austenitic stainless steel in finish turning with advanced ultra-hard SiAlON ceramic tool under different cutting environments. Silicon, 13, 119-147.

Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2020). Performance evaluation of aluminium oxide nano particles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. Scientia Iranica, 27(6), 2838-2852.

Pradhan, S., Dhupal, D., Das, S. R., & Jena, P. C. (2021). Experimental investigation and optimization on machined surface of Si3N4 ceramic using hot SiC abrasive in HAJM. Materials Today: Proceedings, 44, 1877-1887.

Pradhan, S., Tripathy, S. S., Sahu, S., Das, S. R., Jena, P. C., & Dhupal, D. (2020). Investigation on MRR and DOC of the micro-holes generated on quartz using silicon carbide by FB-HAJM. Materials Today: Proceedings, 26, 2005-2012.

Behera, R. K., & Das, S. R. (2019). Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic. Matériaux & Techniques, 107(6), 603.

Das, A., Pradhan, O., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). Performance appraisal of various nanofluids during hard machining of AISI 4340 steel. Journal of Manufacturing Processes, 46, 248-270.

Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel. Machining Science and Technology, 24(2), 291-320.

Das, A., Patel, S. K., & Das, S. R. (2019). Performance comparison of vegetable oil based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication. Mechanics & Industry, 20(5), 506.

Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryo treated cermet inserts. Journal of Superhard Materials, 41, 247-264.

Panda, A., Ranjan Das, S., & Dhupal, D. (2019). Machinability investigation of HSLA steel in hard turning with coated ceramic tool: assessment, modeling, optimization and economic aspects. Journal of Advanced Manufacturing Systems, 18(04), 625-655.

Das, A., Tirkey, N., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). A comparison of machinability in hard turning of EN-24 alloy steel under mist cooled and dry cutting environments with a coated cermet tool. Journal of Failure Analysis and Prevention, 19, 115-130.

Dixit, S. R., Das, S. R., & Dhupal, D. (2019). Parametric optimization of Nd: YAG laser microgrooving on aluminum oxide using integrated RSM-ANN-GA approach. Journal of Industrial Engineering International, 15, 333-349.

Anand, A., Behera, A. K., & Das, S. R. (2019). An overview on economic machining of hardened steels by hard turning and its process variables. Manufacturing Review, 6, 4.

DHUPAL, D., DIXIT, S. R., & DAS, S. R. (2018). Optimization of process parameters in laser microgrooving of alumina ceramic using genetic algorithm. UPB Sci. Bull., 80, 163-178.

Dhupal, D., Mohanty, S., Dixit, S. R., Das, S. R., & Nanda, B. K. (2018). Micromachining on Al-SiC based metal matrix composite using DPSS laser. Materials Today: Proceedings, 5(5), 11304-11318.

Dhupal, D., Naik, S., & Das, S. R. (2018). Modelling and optimization of Al–SiC MMC through EDM process using copper and brass electrodes. Materials Today: Proceedings, 5(5), 11295-11303.

Das, S. R., Panda, A., & Dhupal, D. (2018). Hard turning of AISI 4340 steel using coated carbide insert: Surface roughness, tool wear, chip morphology and cost estimation. Materials Today: Proceedings, 5(2), 6560-6569.

Nanda, B. K., Dhupal, D., Buda, D., & Das, S. R. (2018). Abrasive jet drilling of alumina ceramic with pressurized-fluidized bed set-up. Materials Today: Proceedings, 5(5), 12570-12578.

Panda, A., Das, S. R., & Dhupal, D. (2017). Surface roughness analysis for economical feasibility study of coated ceramic tool in hard turning operation. Process Integration and Optimization for Sustainability, 1, 237-249.

Das, S. R., Panda, A., & Dhupal, D. (2017). Experimental investigation of surface roughness, flank wear, chip morphology and cost estimation during machining of hardened AISI 4340 steel with coated carbide insert. Mechanics of Advanced Materials and Modern Processes, 3, 1-14.

Das, S. R., Kumar, A., & Dhupal, D. (2016). Experimental investigation on cutting force and surface roughness in machining of hardened AISI 52100 steel using cBN tool. International Journal of Machining and Machinability of Materials, 18(5-6), 501-521.

Das, S. R., Dhupal, D., & Kumar, A. (2015). Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts. Journal of Mechanical Science and Technology, 29, 4329-4340.

Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108-126.

Das, A., Das, S. R., Panda, A., & Patel, S. K. (2022). Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 236(5), 1889-1905.

Das, A., Padhan, S., & Das, S. R. (2022). Analysis on hole overcut during micro-EDM of Inconel 718. Materials Today: Proceedings, 56, 29-35.

Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2021). Analysis on surface integrity and sustainability assessment in electrical discharge machining of engineered Al-22% SiC metal matrix composite. Rev Metal, 57(4), e210.

Pradhan, S., Sahu, S., Das, S. R., & Dhupal, D. (2021). Experimental study and simulation of surface generation during machining of K-80 alumina ceramic in modified abrasive jet machining with different temperatures using Al2O3 abrasives. International Journal of Abrasive Technology, 10(4), 298-329.

Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2020). Experimental investigation on machining of hardstone quartz with modified AJM using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-22.

Panda, A., Das, S. R., Dhupal, D., & Davim, J. P. (2018). Hard turning of HSLA steel with coated ceramic tool based on evaluation of surface roughness, tool wear, chip morphology and economic analysis. Journal of Manufacturing Technology Research, 10(3/4), 113-141.

Panda, A., Das, S. R., & Dhupal, D. (2018). Experimental investigation, modelling and optimization in hard turning of high strength low alloy steel (AISI 4340). Matériaux & Techniques, 106(4), 404.

Das, S. R., Kumar, A., & Dhupal, D. (2015). Surface roughness analysis of hardened steel using TiN coated ceramic inserts. International Journal of Machining and Machinability of Materials, 17(1), 22-38.

Das, A., Padhan, S., Das, S. R., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2021). Performance assessment and chip morphology evaluation of austenitic stainless steel under sustainable machining conditions. Metals, 11(12), 1931.

Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2022). Electrical discharge machining of engineered Al-22% SiC metal matrix composite: surface roughness analysis, optimization, economic analysis, and sustainability assessment. Process Integration and Optimization for Sustainability, 1-29.

Behera, R. K., Samal, B. P., Panigrahi, S. C., Das, S. R., Mohamed, A., Muduli, K., ... & Das, R. (2022). Experimental analysis on machinability aspects of sintered aluminium metal matrix (Al+ Si+ Mg+ Cu+ SiC) composite-a novel product produced by powder metallurgy method. International Journal of Materials Engineering Innovation, 13(1), 1-22.

Das, A., Gautam, A., Panda, A., Das, S. R., Debnath, K., Ramakrishna, C., & Patel, S. K. (2022). Comparative performance evaluation between uncoated and TiAlN+ AlCrN coated carbide tools in hard turning of AISI H11 steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089221110430.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(2), 1009-1035.

Rout, B., Dash, R., Dhupal, D., & Das, S. R. (2022). Optimized posture prediction for task specific during stacking process using human upper body movements. International Journal on Interactive Design and Manufacturing (IJIDeM), 16(1), 291-303.

Das, A., Kamal, M., Das, S. R., Patel, S. K., Panda, A., Rafighi, M., & Biswal, B. B. (2022). Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(6), 3174-3197.

Padhan, S., Das, S. R., Das, A., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2022). Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials, 15(7), 2368.

Das, A., Gupta, M. K., Das, S. R., Panda, A., Patel, S. K., & Padhan, S. (2022). Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: comparative machinability investigation and sustainability assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(4), 138.

Rafighi, M., Özdemir, M., Das, A., & Das, S. R. (2022). Machinability investigation of cryogenically treated hardened AISI 4140 alloy steel using CBN insert under sustainable finish dry hard turning. Surface Review and Letters, 29(04), 2250047.

Das, A., Mohapatra, S., Gajrani, K. K., Das, S. R., & Patel, S. K. (2022). Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 09544054221111884.

Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., Somani, N., & Gupta, N. K. (2022). Machine Learning-based modeling and optimization in hard turning of AISI D6 steel with advanced AlTiSiN-coated carbide inserts to predict surface roughness and other machining characteristics. Surface Review and Letters, 29(10), 2250137.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Investigations on surface integrity in hard turning of functionally graded specimen under nano fluid assisted minimum quantity lubrication. Advances in Materials and Processing Technologies, 8(sup3), 1714-1729.

Rafighi, M., Özdemir, M., ?ahino?lu, A., Kumar, R., & Das, S. R. (2022). Experimental assessment and topsis optimization of cutting force, surface roughness, and sound intensity in hard turning of AISI 52100 steel. Surface Review and Letters, 29(11), 2250150.

Babu, M. N., Anandan, V., Parthasarathi, N. L., Yildirim, C. V., Babu, M. D., & Das, S. R. (2022). Performance analysis in turning of D3 tool steel using silver nanoplatelets as additives under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(12), 591.

Ibrahim, A. M. M., Omer, M. A., Das, S. R., Li, W., Alsoufi, M. S., & Elsheikh, A. (2022). Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using vegetable oil enriched with nano-additives. Alexandria Engineering Journal, 61(12), 10925-10938.

Kumar, N., Kumar, A., & Das, S. R. (2023). ELECTROCHEMICAL ARC DRILLING OF NICKEL–TITANIUM SHAPE MEMORY ALLOY USING MOLYBDENUM ELECTRODE: INVESTIGATION, MODELING AND OPTIMIZATION. Surface Review & Letters, 30(8).

Wagri, N. K., Jain, N. K., Petare, A., Das, S. R., Tharwan, M. Y., Alansari, A., ... & Elsheikh, A. (2023). Investigation on the performance of coated carbide tool during dry turning of AISI 4340 alloy steel. Materials, 16(2), 668.

Padhan, S., Wagri, N. K., Dash, L., Das, A., Das, S. R., Rafighi, M., & Sharma, P. (2023). Investigation on surface integrity in hard turning of AISI 4140 steel with SPPP-AlTiSiN coated carbide insert under nano-MQL. Lubricants, 11(2), 49.

Mahapatra, S., Das, A., Jena, P. C., & Das, S. R. (2023). Turning of hardened AISI H13 steel with recently developed S3P-AlTiSiN coated carbide tool using MWCNT mixed nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 237(4), 843-864.

Sharma, P., Soni, H., Sethy, S., Das, S. R., Tharwan, M. Y., Al Sofyani, S., ... & Elsheikh, A. (2023). Surface characterization of SAE 304 after WED cutting: An experimental investigation and optimization. Journal of Materials Research and Technology, 23, 5723-5732.

Mishra, P. C., Roychoudhury, A., Banerjee, A., Saha, N., Das, S. R., & Das, A. (2023). Coated Piston Ring Pack and Cylinder Liner Elastodynamics in Correlation to Piston Subsystem Elastohydrodynamic: Through FEA Modelling. Lubricants, 11(5), 192.

Pittala, R. K., Sharma, P., Anne, G., Patil, S., Varghese, V., Das, S. R., ... & Fernandes, F. (2023). Development and Mechanical Characterization of Ni-Cr Alloy Foam Using Ultrasonic-Assisted Electroplating Coating Technique. Coatings, 13(6), 1002.

Biswal, S., Das, S. R., Saha, N., & Mishra, P. C. (2023). Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environment, Development and Sustainability, 1-32. https://doi.org/10.1007/s10668-023-03752-6

Kumar, N., Kumar, A., Sethy, S., & Das, S. R. (2023). Investigation and optimization in electrochemical arc drilling of Ni55. 7Ti nickel–titanium shape memory alloy with molybdenum electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45(9), 448.

Somani, N., Walia, A. S., Gupta, N. K., Panda, J. P., Das, A., & Das, S. R. (2023). Data driven surrogate model-based optimization of the process parameters in electric discharge machining of D2 steel using Cu-SiC composite tool for the machined surface roughness and the tool wear. Revista de Metalurgia, 59(2), e242-e242.

Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). ANALYSIS ON POWER CONSUMPTION FOR LIFE CYCLE SUSTAINABILITY ASSESSMENT IN HARD TURNING OF AISI 4140 STEEL USING SPPPâ€” AlTiSiN-COATED CARBIDE TOOL UNDER VARIOUS CUTTING ENVIRONMENTS. Surface Review and Letters (SRL), 31(06), 1-26.

Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Investigation on Surface Roughness and Power Consumption for Sustainability Assessment in Hard Turning of HSLA Steel With SPPP?AlTiSiN–Coated Carbide Tool Under Various Cooling?Lubrications. Lubrication Science. https://doi.org/10.1002/ls.1717

Das, A., Barrenkala, D., Das, S. R., Patel, S. K., Somani, N., & Kumar, C. S. (2024). Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089231223021.

Dhupal, D., Panigrahi, D., Rout, S., Bhuyan, R. K., Nayak, S., Jena, P. C., & Das, S. R. (2024). Generation of effusion holes on ultra-high temperature alloy by micro electro-discharge machining process. Surface Review and Letters, 31(02), 2450015.

Padhan, S., Das, A., & Das, S. R. (2024). Analysis, modelling and optimization on tool vibration in machining of nitronic 60 with SiAlON ceramic tool. Advances in Materials and Processing Technologies, 1-14.

Roy, S., Das, A., Kumar, R., Das, S. R., Rafighi, M., & Sharma, P. (2024). Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on the performance and sustainability assessment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 09544054241229472.

Sethy, S., Rana, J., Sharma, P., & Das, S. R. (2024). Comparative performance investigation and sustainability assessment in electrical discharge machining of SS316 using different dielectrics. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238(7), 2718-2733.

Panda, D., Sahu, S. K., & Das, S. R. (2024). Comparative performance evaluation and economic assessment between traditional and vibration assisted EDM during machining of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 09544062241244949.

Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. (2024). Comparative performance investigation and sustainability evaluation between hot-AJM and AJM during machining of zirconia ceramic using Al2O3 abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46(5), 263.

Das, A., Kumar, A., Padhan, S., Das, S. R., Satpathy, M. P., & Patel, S. K. (2024). Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: comparative machining performance evaluation and economic assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46(5), 277.

Sethy, S., Das, S. R., Rana, J., Behera, A. K., & Gupta, M. K. (2024). Performance evaluation and economic assessment in electrical discharge machining of SS316 using graphite powder dispersed in biodegradable palm oil dielectric. Surface Review and Letters, 2450120.

Sarangi, S., Behera, A. K., Bajpai, S., Sahoo, S., Sethy, S., & Das, S. R. (2024). Application of tri-vector analysis to identify the optimum coating thickness in induced draft fans. Surface Review and Letters. https://doi.org/10.1142/S0218625X24501336

Parida, S. P., Mishra, D., Padhy, R. L., Jena, P. C., Das, S. R., Basem, A. A., ... & Elsheikh, A. (2024). Effect of Alkali Treatment on Mechanical and Buckling Behaviour of Natural Fiber Reinforced Composite Cylinder. ES Materials & Manufacturing, 24, 1161.

Parida, S. P., Jena, P. C., Das, S. R., Basem, A., Khatua, A. K., & Elsheikh, A. H. (2024). Transverse vibration of laminated-composite-plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 09544062241256589.

Elsheikh, A. H., Abd Elaziz, M., Das, S. R., Muthuramalingam, T., & Lu, S. (2021). A new optimized predictive model based on political optimizer for eco-friendly MQL-turning of AISI 4340 alloy with nano-lubricants. Journal of Manufacturing Processes, 67, 562-578.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Investigations on surface integrity in hard turning of functionally graded specimen under nano fluid assisted minimum quantity lubrication. Advances in Materials and Processing Technologies, 8(sup3), 1714-1729.

Parida, S. P., Jena, P. C., Das, S. R., Dhupal, D., & Dash, R. R. (2022). Comparative stress analysis of different suitable biomaterials for artificial hip joint and femur bone using finite element simulation. Advances in Materials and Processing Technologies, 8(sup3), 1741-1756.

Lalatendu Dash, Smita Padhan, Anshuman Das, Sudhansu Ranjan Das, “Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, doi:10.1177/0954406221993844 (2021). SCIE

Behera, R. K., Samal, B. P., Panigrahi, S. C., & Das, S. R. (2021). Optimization of erosion wears of Al–Mg–Si–Cu–SiC composite produced by the PM method. Corrosion Reviews, 39(1), 63-75.

Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2021). Machining of hardstone quartz with modified AJM process using hot SiC abrasives: analysis, modeling, optimization, and cost analysis. Surface Review and Letters, 28(02), 2050049.

Dash, L., Padhan, S., & Das, S. R. (2020). Design optimization for analysis of surface integrity and chip morphology in hard turning. Structural Engineering and Mechanics, An Int'l Journal, 76(5), 561-578.

Dash, L., Padhan, S., & Das, S. R. (2020). Experimental investigations on surface integrity and chip morphology in hard tuning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42(10), 500.

Pradhan, S., Das, S. R., & Dhupal, D. (2021). Performance evaluation of recently developed new process HAJM during machining hardstone quartz using hot silicon carbide abrasives: an experimental investigation and sustainability assessment. Silicon, 13(9), 2895-2919.

Padhan, S., Dash, L., Behera, S. K., & Das, S. R. (2020). Modeling and optimization of power consumption for economic analysis, energy-saving carbon footprint analysis, and sustainability assessment in finish hard turning under graphene nanoparticle–assisted minimum quantity lubrication. Process Integration and Optimization for Sustainability, 4, 445-463.

Naik, S., Das, S. R., & Dhupal, D. (2020). Analysis, predictive modelling and multi-response optimization in electrical discharge machining of Al-22% SiC metal matrix composite for minimization of surface roughness and hole overcut. Manufacturing Review, 7, 20.

Naik, S., Das, S. R., & Dhupal, D. (2021). Experimental investigation, predictive modeling, parametric optimization and cost analysis in electrical discharge machining of Al-SiC metal matrix composite. Silicon, 13, 1017-1040.

Panda, A., Das, S. R., & Dhupal, D. (2020). Machinability investigation and sustainability assessment in FDHT with coated ceramic tool. Steel and Composite Structures, An International Journal, 34(5), 681-698.

Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts. Mechanics & Industry, 21(1), 110.

Padhan, S., Das, A., Santoshwar, A., Dharmendrabhai, T. R., & Das, S. R. (2021). Sustainability assessment and machinability investigation of austenitic stainless steel in finish turning with advanced ultra-hard SiAlON ceramic tool under different cutting environments. Silicon, 13, 119-147.

Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2020). Performance evaluation of aluminium oxide nano particles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. Scientia Iranica, 27(6), 2838-2852.

Pradhan, S., Dhupal, D., Das, S. R., & Jena, P. C. (2021). Experimental investigation and optimization on machined surface of Si3N4 ceramic using hot SiC abrasive in HAJM. Materials Today: Proceedings, 44, 1877-1887.

Pradhan, S., Tripathy, S. S., Sahu, S., Das, S. R., Jena, P. C., & Dhupal, D. (2020). Investigation on MRR and DOC of the micro-holes generated on quartz using silicon carbide by FB-HAJM. Materials Today: Proceedings, 26, 2005-2012.

Behera, R. K., & Das, S. R. (2019). Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic. Matériaux & Techniques, 107(6), 603.

Das, A., Pradhan, O., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). Performance appraisal of various nanofluids during hard machining of AISI 4340 steel. Journal of Manufacturing Processes, 46, 248-270.

Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel. Machining Science and Technology, 24(2), 291-320.

Das, A., Patel, S. K., & Das, S. R. (2019). Performance comparison of vegetable oil based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication. Mechanics & Industry, 20(5), 506.

Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryo treated cermet inserts. Journal of Superhard Materials, 41, 247-264.

Panda, A., Ranjan Das, S., & Dhupal, D. (2019). Machinability investigation of HSLA steel in hard turning with coated ceramic tool: assessment, modeling, optimization and economic aspects. Journal of Advanced Manufacturing Systems, 18(04), 625-655.

Das, A., Tirkey, N., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). A comparison of machinability in hard turning of EN-24 alloy steel under mist cooled and dry cutting environments with a coated cermet tool. Journal of Failure Analysis and Prevention, 19, 115-130.

Dixit, S. R., Das, S. R., & Dhupal, D. (2019). Parametric optimization of Nd: YAG laser microgrooving on aluminum oxide using integrated RSM-ANN-GA approach. Journal of Industrial Engineering International, 15, 333-349.

Anand, A., Behera, A. K., & Das, S. R. (2019). An overview on economic machining of hardened steels by hard turning and its process variables. Manufacturing Review, 6, 4.

DHUPAL, D., DIXIT, S. R., & DAS, S. R. (2018). Optimization of process parameters in laser microgrooving of alumina ceramic using genetic algorithm. UPB Sci. Bull., 80, 163-178.

Dhupal, D., Mohanty, S., Dixit, S. R., Das, S. R., & Nanda, B. K. (2018). Micromachining on Al-SiC based metal matrix composite using DPSS laser. Materials Today: Proceedings, 5(5), 11304-11318.

Dhupal, D., Naik, S., & Das, S. R. (2018). Modelling and optimization of Al–SiC MMC through EDM process using copper and brass electrodes. Materials Today: Proceedings, 5(5), 11295-11303.

Das, S. R., Panda, A., & Dhupal, D. (2018). Hard turning of AISI 4340 steel using coated carbide insert: Surface roughness, tool wear, chip morphology and cost estimation. Materials Today: Proceedings, 5(2), 6560-6569.

Nanda, B. K., Dhupal, D., Buda, D., & Das, S. R. (2018). Abrasive jet drilling of alumina ceramic with pressurized-fluidized bed set-up. Materials Today: Proceedings, 5(5), 12570-12578.

Panda, A., Das, S. R., & Dhupal, D. (2017). Surface roughness analysis for economical feasibility study of coated ceramic tool in hard turning operation. Process Integration and Optimization for Sustainability, 1, 237-249.

Das, S. R., Panda, A., & Dhupal, D. (2017). Experimental investigation of surface roughness, flank wear, chip morphology and cost estimation during machining of hardened AISI 4340 steel with coated carbide insert. Mechanics of Advanced Materials and Modern Processes, 3, 1-14.

Das, S. R., Kumar, A., & Dhupal, D. (2016). Experimental investigation on cutting force and surface roughness in machining of hardened AISI 52100 steel using cBN tool. International Journal of Machining and Machinability of Materials, 18(5-6), 501-521.

Das, S. R., Dhupal, D., & Kumar, A. (2015). Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts. Journal of Mechanical Science and Technology, 29, 4329-4340.

Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108-126.

Rout, B., Dash, R., Dhupal, D., & Das, S. R. (2022). Optimized posture prediction for task specific during stacking process using

Das, A., Kamal, M., Das, S. R., Patel, S. K., Panda, A., Rafighi, M., & Biswal, B. B. (2022). Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(6), 3174-3197.

Padhan, S., Das, S. R., Das, A., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2022). Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials, 15(7), 2368.

Das, A., Gupta, M. K., Das, S. R., Panda, A., Patel, S. K., & Padhan, S. (2022). Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: comparative machinability investigation and sustainability assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(4), 138.

Rafighi, M., Özdemir, M., Das, A., & Das, S. R. (2022). Machinability investigation of cryogenically treated hardened AISI 4140 alloy steel using CBN insert under sustainable finish dry hard turning. Surface Review and Letters, 29(04), 2250047.

Das, A., Mohapatra, S., Gajrani, K. K., Das, S. R., & Patel, S. K. (2022). Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 09544054221111884.

Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., Somani, N., & Gupta, N. K. (2022). Machine Learning-based modeling and optimization in hard turning of AISI D6 steel with advanced AlTiSiN-coated carbide inserts to predict surface roughness and other machining characteristics. Surface Review and Letters, 29(10), 2250137.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Investigations on surface integrity in hard turning of functionally graded specimen under nano fluid assisted minimum quantity lubrication. Advances in Materials and Processing Technologies, 8(sup3), 1714-1729.

Rafighi, M., Özdemir, M., ?ahino?lu, A., Kumar, R., & Das, S. R. (2022). Experimental assessment and topsis optimization of cutting force, surface roughness, and sound intensity in hard turning of AISI 52100 steel. Surface Review and Letters, 29(11), 2250150.

Babu, M. N., Anandan, V., Parthasarathi, N. L., Yildirim, C. V., Babu, M. D., & Das, S. R. (2022). Performance analysis in turning of D3 tool steel using silver nanoplatelets as additives under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(12), 591.

Ibrahim, A. M. M., Omer, M. A., Das, S. R., Li, W., Alsoufi, M. S., & Elsheikh, A. (2022). Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using vegetable oil enriched with nano-additives. Alexandria Engineering Journal, 61(12), 10925-10938.

Kumar, N., Kumar, A., & Das, S. R. (2023). ELECTROCHEMICAL ARC DRILLING OF NICKEL–TITANIUM SHAPE MEMORY ALLOY USING MOLYBDENUM ELECTRODE: INVESTIGATION, MODELING AND OPTIMIZATION. Surface Review & Letters, 30(8).

Wagri, N. K., Jain, N. K., Petare, A., Das, S. R., Tharwan, M. Y., Alansari, A., ... & Elsheikh, A. (2023). Investigation on the performance of coated carbide tool during dry turning of AISI 4340 alloy steel. Materials, 16(2), 668.

Padhan, S., Wagri, N. K., Dash, L., Das, A., Das, S. R., Rafighi, M., & Sharma, P. (2023). Investigation on surface integrity in hard turning of AISI 4140 steel with SPPP-AlTiSiN coated carbide insert under nano-MQL. Lubricants, 11(2), 49.

Mahapatra, S., Das, A., Jena, P. C., & Das, S. R. (2023). Turning of hardened AISI H13 steel with recently developed S3P-AlTiSiN coated carbide tool using MWCNT mixed nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 237(4), 843-864.

Sharma, P., Soni, H., Sethy, S., Das, S. R., Tharwan, M. Y., Al Sofyani, S., ... & Elsheikh, A. (2023). Surface characterization of SAE 304 after WED cutting: An experimental investigation and optimization. Journal of Materials Research and Technology, 23, 5723-5732.

Mishra, P. C., Roychoudhury, A., Banerjee, A., Saha, N., Das, S. R., & Das, A. (2023). Coated Piston Ring Pack and Cylinder Liner Elastodynamics in Correlation to Piston Subsystem Elastohydrodynamic: Through FEA Modelling. Lubricants, 11(5), 192.

Pittala, R. K., Sharma, P., Anne, G., Patil, S., Varghese, V., Das, S. R., ... & Fernandes, F. (2023). Development and Mechanical Characterization of Ni-Cr Alloy Foam Using Ultrasonic-Assisted Electroplating Coating Technique. Coatings, 13(6), 1002.

Biswal, S., Das, S. R., Saha, N., & Mishra, P. C. (2023). Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environment, Development and Sustainability, 1-32. https://doi.org/10.1007/s10668-023-03752-6

Kumar, N., Kumar, A., Sethy, S., & Das, S. R. (2023). Investigation and optimization in electrochemical arc drilling of Ni55. 7Ti nickel–titanium shape memory alloy with molybdenum electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45(9), 448.

Somani, N., Walia, A. S., Gupta, N. K., Panda, J. P., Das, A., & Das, S. R. (2023). Data driven surrogate model-based optimization of the process parameters in electric discharge machining of D2 steel using Cu-SiC composite tool for the machined surface roughness and the tool wear. Revista de Metalurgia, 59(2), e242-e242.

Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). ANALYSIS ON POWER CONSUMPTION FOR LIFE CYCLE SUSTAINABILITY ASSESSMENT IN HARD TURNING OF AISI 4140 STEEL USING SPPPâ€” AlTiSiN-COATED CARBIDE TOOL UNDER VARIOUS CUTTING ENVIRONMENTS. Surface Review and Letters (SRL), 31(06), 1-26.

Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Investigation on Surface Roughness and Power Consumption for Sustainability Assessment in Hard Turning of HSLA Steel With SPPP?AlTiSiN–Coated Carbide Tool Under Various Cooling?Lubrications. Lubrication Science. https://doi.org/10.1002/ls.1717

Das, A., Barrenkala, D., Das, S. R., Patel, S. K., Somani, N., & Kumar, C. S. (2024). Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089231223021.

Dhupal, D., Panigrahi, D., Rout, S., Bhuyan, R. K., Nayak, S., Jena, P. C., & Das, S. R. (2024). Generation of effusion holes on ultra-high temperature alloy by micro electro-discharge machining process. Surface Review and Letters, 31(02), 2450015.

Padhan, S., Das, A., & Das, S. R. (2024). Analysis, modelling and optimization on tool vibration in machining of nitronic 60 with SiAlON ceramic tool. Advances in Materials and Processing Technologies, 1-14.

Roy, S., Das, A., Kumar, R., Das, S. R., Rafighi, M., & Sharma, P. (2024). Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on the performance and sustainability assessment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 09544054241229472.

Sethy, S., Rana, J., Sharma, P., & Das, S. R. (2024). Comparative performance investigation and sustainability assessment in electrical discharge machining of SS316 using different dielectrics. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238(7), 2718-2733.

Panda, D., Sahu, S. K., & Das, S. R. (2024). Comparative performance evaluation and economic assessment between traditional and vibration assisted EDM during machining of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 09544062241244949.

Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. (2024). Comparative performance investigation and sustainability evaluation between hot-AJM and AJM during machining of zirconia ceramic using Al2O3 abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46(5), 263.

Das, A., Kumar, A., Padhan, S., Das, S. R., Satpathy, M. P., & Patel, S. K. (2024). Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: comparative machining performance evaluation and economic assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46(5), 277.

Sethy, S., Das, S. R., Rana, J., Behera, A. K., & Gupta, M. K. (2024). Performance evaluation and economic assessment in electrical discharge machining of SS316 using graphite powder dispersed in biodegradable palm oil dielectric. Surface Review and Letters, 2450120.

Sarangi, S., Behera, A. K., Bajpai, S., Sahoo, S., Sethy, S., & Das, S. R. (2024). Application of tri-vector analysis to identify the optimum coating thickness in induced draft fans. Surface Review and Letters. https://doi.org/10.1142/S0218625X24501336

Parida, S. P., Mishra, D., Padhy, R. L., Jena, P. C., Das, S. R., Basem, A. A., ... & Elsheikh, A. (2024). Effect of Alkali Treatment on Mechanical and Buckling Behaviour of Natural Fiber Reinforced Composite Cylinder. ES Materials & Manufacturing, 24, 1161.

Parida, S. P., Jena, P. C., Das, S. R., Basem, A., Khatua, A. K., & Elsheikh, A. H. (2024). Transverse vibration of laminated-composite-plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 09544062241256589.

Elsheikh, A. H., Abd Elaziz, M., Das, S. R., Muthuramalingam, T., & Lu, S. (2021). A new optimized predictive model based on political optimizer for eco-friendly MQL-turning of AISI 4340 alloy with nano-lubricants. Journal of Manufacturing Processes, 67, 562-578.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Investigations on surface integrity in hard turning of functionally graded specimen under nano fluid assisted minimum quantity lubrication. Advances in Materials and Processing Technologies, 8(sup3), 1714-1729.

Parida, S. P., Jena, P. C., Das, S. R., Dhupal, D., & Dash, R. R. (2022). Comparative stress analysis of different suitable biomaterials for artificial hip joint and femur bone using finite element simulation. Advances in Materials and Processing Technologies, 8(sup3), 1741-1756.

Lalatendu Dash, Smita Padhan, Anshuman Das, Sudhansu Ranjan Das, “Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, doi:10.1177/0954406221993844 (2021). SCIE

Behera, R. K., Samal, B. P., Panigrahi, S. C., & Das, S. R. (2021). Optimization of erosion wears of Al–Mg–Si–Cu–SiC composite produced by the PM method. Corrosion Reviews, 39(1), 63-75.

Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2021). Machining of hardstone quartz with modified AJM process using hot SiC abrasives: analysis, modeling, optimization, and cost analysis. Surface Review and Letters, 28(02), 2050049.

Dash, L., Padhan, S., & Das, S. R. (2020). Design optimization for analysis of surface integrity and chip morphology in hard turning. Structural Engineering and Mechanics, An Int'l Journal, 76(5), 561-578.

Dash, L., Padhan, S., & Das, S. R. (2020). Experimental investigations on surface integrity and chip morphology in hard tuning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42(10), 500.

Pradhan, S., Das, S. R., & Dhupal, D. (2021). Performance evaluation of recently developed new process HAJM during machining hardstone quartz using hot silicon carbide abrasives: an experimental investigation and sustainability assessment. Silicon, 13(9), 2895-2919.

Padhan, S., Dash, L., Behera, S. K., & Das, S. R. (2020). Modeling and optimization of power consumption for economic analysis, energy-saving carbon footprint analysis, and sustainability assessment in finish hard turning under graphene nanoparticle–assisted minimum quantity lubrication. Process Integration and Optimization for Sustainability, 4, 445-463.

Naik, S., Das, S. R., & Dhupal, D. (2020). Analysis, predictive modelling and multi-response optimization in electrical discharge machining of Al-22% SiC metal matrix composite for minimization of surface roughness and hole overcut. Manufacturing Review, 7, 20.

Naik, S., Das, S. R., & Dhupal, D. (2021). Experimental investigation, predictive modeling, parametric optimization and cost analysis in electrical discharge machining of Al-SiC metal matrix composite. Silicon, 13, 1017-1040.

Panda, A., Das, S. R., & Dhupal, D. (2020). Machinability investigation and sustainability assessment in FDHT with coated ceramic tool. Steel and Composite Structures, An International Journal, 34(5), 681-698.

Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts. Mechanics & Industry, 21(1), 110.

Padhan, S., Das, A., Santoshwar, A., Dharmendrabhai, T. R., & Das, S. R. (2021). Sustainability assessment and machinability investigation of austenitic stainless steel in finish turning with advanced ultra-hard SiAlON ceramic tool under different cutting environments. Silicon, 13, 119-147.

Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2020). Performance evaluation of aluminium oxide nano particles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. Scientia Iranica, 27(6), 2838-2852.

Pradhan, S., Dhupal, D., Das, S. R., & Jena, P. C. (2021). Experimental investigation and optimization on machined surface of Si3N4 ceramic using hot SiC abrasive in HAJM. Materials Today: Proceedings, 44, 1877-1887.

Pradhan, S., Tripathy, S. S., Sahu, S., Das, S. R., Jena, P. C., & Dhupal, D. (2020). Investigation on MRR and DOC of the micro-holes generated on quartz using silicon carbide by FB-HAJM. Materials Today: Proceedings, 26, 2005-2012.

Behera, R. K., & Das, S. R. (2019). Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic. Matériaux & Techniques, 107(6), 603.

Das, A., Pradhan, O., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). Performance appraisal of various nanofluids during hard machining of AISI 4340 steel. Journal of Manufacturing Processes, 46, 248-270.

Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel. Machining Science and Technology, 24(2), 291-320.

Das, A., Patel, S. K., & Das, S. R. (2019). Performance comparison of vegetable oil based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication. Mechanics & Industry, 20(5), 506.

Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryo treated cermet inserts. Journal of Superhard Materials, 41, 247-264.

Panda, A., Ranjan Das, S., & Dhupal, D. (2019). Machinability investigation of HSLA steel in hard turning with coated ceramic tool: assessment, modeling, optimization and economic aspects. Journal of Advanced Manufacturing Systems, 18(04), 625-655.

Das, A., Tirkey, N., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). A comparison of machinability in hard turning of EN-24 alloy steel under mist cooled and dry cutting environments with a coated cermet tool. Journal of Failure Analysis and Prevention, 19, 115-130.

Dixit, S. R., Das, S. R., & Dhupal, D. (2019). Parametric optimization of Nd: YAG laser microgrooving on aluminum oxide using integrated RSM-ANN-GA approach. Journal of Industrial Engineering International, 15, 333-349.

Anand, A., Behera, A. K., & Das, S. R. (2019). An overview on economic machining of hardened steels by hard turning and its process variables. Manufacturing Review, 6, 4.

DHUPAL, D., DIXIT, S. R., & DAS, S. R. (2018). Optimization of process parameters in laser microgrooving of alumina ceramic using genetic algorithm. UPB Sci. Bull., 80, 163-178.

Dhupal, D., Mohanty, S., Dixit, S. R., Das, S. R., & Nanda, B. K. (2018). Micromachining on Al-SiC based metal matrix composite using DPSS laser. Materials Today: Proceedings, 5(5), 11304-11318.

Dhupal, D., Naik, S., & Das, S. R. (2018). Modelling and optimization of Al–SiC MMC through EDM process using copper and brass electrodes. Materials Today: Proceedings, 5(5), 11295-11303.

Das, S. R., Panda, A., & Dhupal, D. (2018). Hard turning of AISI 4340 steel using coated carbide insert: Surface roughness, tool wear, chip morphology and cost estimation. Materials Today: Proceedings, 5(2), 6560-6569.

Nanda, B. K., Dhupal, D., Buda, D., & Das, S. R. (2018). Abrasive jet drilling of alumina ceramic with pressurized-fluidized bed set-up. Materials Today: Proceedings, 5(5), 12570-12578.

Panda, A., Das, S. R., & Dhupal, D. (2017). Surface roughness analysis for economical feasibility study of coated ceramic tool in hard turning operation. Process Integration and Optimization for Sustainability, 1, 237-249.

Das, S. R., Panda, A., & Dhupal, D. (2017). Experimental investigation of surface roughness, flank wear, chip morphology and cost estimation during machining of hardened AISI 4340 steel with coated carbide insert. Mechanics of Advanced Materials and Modern Processes, 3, 1-14.

Das, S. R., Kumar, A., & Dhupal, D. (2016). Experimental investigation on cutting force and surface roughness in machining of hardened AISI 52100 steel using cBN tool. International Journal of Machining and Machinability of Materials, 18(5-6), 501-521.

Das, S. R., Dhupal, D., & Kumar, A. (2015). Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts. Journal of Mechanical Science and Technology, 29, 4329-4340.

Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108-126.

Das, A., Das, S. R., Panda, A., & Patel, S. K. (2022). Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 236(5), 1889-1905.

Das, A., Padhan, S., & Das, S. R. (2022). Analysis on hole overcut during micro-EDM of Inconel 718. Materials Today: Proceedings, 56, 29-35.

Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2021). Analysis on surface integrity and sustainability assessment in electrical discharge machining of engineered Al-22% SiC metal matrix composite. Rev Metal, 57(4), e210.

Pradhan, S., Sahu, S., Das, S. R., & Dhupal, D. (2021). Experimental study and simulation of surface generation during machining of K-80 alumina ceramic in modified abrasive jet machining with different temperatures using Al2O3 abrasives. International Journal of Abrasive Technology, 10(4), 298-329.

Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2020). Experimental investigation on machining of hardstone quartz with modified AJM using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-22.

Panda, A., Das, S. R., Dhupal, D., & Davim, J. P. (2018). Hard turning of HSLA steel with coated ceramic tool based on evaluation of surface roughness, tool wear, chip morphology and economic analysis. Journal of Manufacturing Technology Research, 10(3/4), 113-141.

Panda, A., Das, S. R., & Dhupal, D. (2018). Experimental investigation, modelling and optimization in hard turning of high strength low alloy steel (AISI 4340). Matériaux & Techniques, 106(4), 404.

Das, S. R., Kumar, A., & Dhupal, D. (2015). Surface roughness analysis of hardened steel using TiN coated ceramic inserts. International Journal of Machining and Machinability of Materials, 17(1), 22-38.

Das, A., Padhan, S., Das, S. R., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2021). Performance assessment and chip morphology evaluation of austenitic stainless steel under sustainable machining conditions. Metals, 11(12), 1931.

Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2022). Electrical discharge machining of engineered Al-22% SiC metal matrix composite: surface roughness analysis, optimization, economic analysis, and sustainability assessment. Process Integration and Optimization for Sustainability, 1-29.

Behera, R. K., Samal, B. P., Panigrahi, S. C., Das, S. R., Mohamed, A., Muduli, K., ... & Das, R. (2022). Experimental analysis on machinability aspects of sintered aluminium metal matrix (Al+ Si+ Mg+ Cu+ SiC) composite-a novel product produced by powder metallurgy method. International Journal of Materials Engineering Innovation, 13(1), 1-22.

Das, A., Gautam, A., Panda, A., Das, S. R., Debnath, K., Ramakrishna, C., & Patel, S. K. (2022). Comparative performance evaluation between uncoated and TiAlN+ AlCrN coated carbide tools in hard turning of AISI H11 steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089221110430.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(2), 1009-1035.

Rout, B., Dash, R., Dhupal, D., & Das, S. R. (2022). Optimized posture prediction for task specific during stacking process using human upper body movements. International Journal on Interactive Design and Manufacturing (IJIDeM), 16(1), 291-303.

Das, A., Kamal, M., Das, S. R., Patel, S. K., Panda, A., Rafighi, M., & Biswal, B. B. (2022). Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(6), 3174-3197.

Padhan, S., Das, S. R., Das, A., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2022). Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials, 15(7), 2368.

Das, A., Gupta, M. K., Das, S. R., Panda, A., Patel, S. K., & Padhan, S. (2022). Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: comparative machinability investigation and sustainability assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(4), 138.

Rafighi, M., Özdemir, M., Das, A., & Das, S. R. (2022). Machinability investigation of cryogenically treated hardened AISI 4140 alloy steel using CBN insert under sustainable finish dry hard turning. Surface Review and Letters, 29(04), 2250047.

Das, A., Mohapatra, S., Gajrani, K. K., Das, S. R., & Patel, S. K. (2022). Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 09544054221111884.

Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., Somani, N., & Gupta, N. K. (2022). Machine Learning-based modeling and optimization in hard turning of AISI D6 steel with advanced AlTiSiN-coated carbide inserts to predict surface roughness and other machining characteristics. Surface Review and Letters, 29(10), 2250137.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Investigations on surface integrity in hard turning of functionally graded specimen under nano fluid assisted minimum quantity lubrication. Advances in Materials and Processing Technologies, 8(sup3), 1714-1729.

Rafighi, M., Özdemir, M., ?ahino?lu, A., Kumar, R., & Das, S. R. (2022). Experimental assessment and topsis optimization of cutting force, surface roughness, and sound intensity in hard turning of AISI 52100 steel. Surface Review and Letters, 29(11), 2250150.

Babu, M. N., Anandan, V., Parthasarathi, N. L., Yildirim, C. V., Babu, M. D., & Das, S. R. (2022). Performance analysis in turning of D3 tool steel using silver nanoplatelets as additives under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(12), 591.

Ibrahim, A. M. M., Omer, M. A., Das, S. R., Li, W., Alsoufi, M. S., & Elsheikh, A. (2022). Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using vegetable oil enriched with nano-additives. Alexandria Engineering Journal, 61(12), 10925-10938.

Kumar, N., Kumar, A., & Das, S. R. (2023). ELECTROCHEMICAL ARC DRILLING OF NICKEL–TITANIUM SHAPE MEMORY ALLOY USING MOLYBDENUM ELECTRODE: INVESTIGATION, MODELING AND OPTIMIZATION. Surface Review & Letters, 30(8).

Wagri, N. K., Jain, N. K., Petare, A., Das, S. R., Tharwan, M. Y., Alansari, A., ... & Elsheikh, A. (2023). Investigation on the performance of coated carbide tool during dry turning of AISI 4340 alloy steel. Materials, 16(2), 668.

Padhan, S., Wagri, N. K., Dash, L., Das, A., Das, S. R., Rafighi, M., & Sharma, P. (2023). Investigation on surface integrity in hard turning of AISI 4140 steel with SPPP-AlTiSiN coated carbide insert under nano-MQL. Lubricants, 11(2), 49.

Mahapatra, S., Das, A., Jena, P. C., & Das, S. R. (2023). Turning of hardened AISI H13 steel with recently developed S3P-AlTiSiN coated carbide tool using MWCNT mixed nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 237(4), 843-864.

Sharma, P., Soni, H., Sethy, S., Das, S. R., Tharwan, M. Y., Al Sofyani, S., ... & Elsheikh, A. (2023). Surface characterization of SAE 304 after WED cutting: An experimental investigation and optimization. Journal of Materials Research and Technology, 23, 5723-5732.

Mishra, P. C., Roychoudhury, A., Banerjee, A., Saha, N., Das, S. R., & Das, A. (2023). Coated Piston Ring Pack and Cylinder Liner Elastodynamics in Correlation to Piston Subsystem Elastohydrodynamic: Through FEA Modelling. Lubricants, 11(5), 192.

Pittala, R. K., Sharma, P., Anne, G., Patil, S., Varghese, V., Das, S. R., ... & Fernandes, F. (2023). Development and Mechanical Characterization of Ni-Cr Alloy Foam Using Ultrasonic-Assisted Electroplating Coating Technique. Coatings, 13(6), 1002.

Biswal, S., Das, S. R., Saha, N., & Mishra, P. C. (2023). Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environment, Development and Sustainability, 1-32. https://doi.org/10.1007/s10668-023-03752-6

Kumar, N., Kumar, A., Sethy, S., & Das, S. R. (2023). Investigation and optimization in electrochemical arc drilling of Ni55. 7Ti nickel–titanium shape memory alloy with molybdenum electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45(9), 448.

Somani, N., Walia, A. S., Gupta, N. K., Panda, J. P., Das, A., & Das, S. R. (2023). Data driven surrogate model-based optimization of the process parameters in electric discharge machining of D2 steel using Cu-SiC composite tool for the machined surface roughness and the tool wear. Revista de Metalurgia, 59(2), e242-e242.

Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). ANALYSIS ON POWER CONSUMPTION FOR LIFE CYCLE SUSTAINABILITY ASSESSMENT IN HARD TURNING OF AISI 4140 STEEL USING SPPPâ€” AlTiSiN-COATED CARBIDE TOOL UNDER VARIOUS CUTTING ENVIRONMENTS. Surface Review and Letters (SRL), 31(06), 1-26.

Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Investigation on Surface Roughness and Power Consumption for Sustainability Assessment in Hard Turning of HSLA Steel With SPPP?AlTiSiN–Coated Carbide Tool Under Various Cooling?Lubrications. Lubrication Science. https://doi.org/10.1002/ls.1717

Das, A., Barrenkala, D., Das, S. R., Patel, S. K., Somani, N., & Kumar, C. S. (2024). Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089231223021.

Dhupal, D., Panigrahi, D., Rout, S., Bhuyan, R. K., Nayak, S., Jena, P. C., & Das, S. R. (2024). Generation of effusion holes on ultra-high temperature alloy by micro electro-discharge machining process. Surface Review and Letters, 31(02), 2450015.

Padhan, S., Das, A., & Das, S. R. (2024). Analysis, modelling and optimization on tool vibration in machining of nitronic 60 with SiAlON ceramic tool. Advances in Materials and Processing Technologies, 1-14.

Roy, S., Das, A., Kumar, R., Das, S. R., Rafighi, M., & Sharma, P. (2024). Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on the performance and sustainability assessment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 09544054241229472.

Sethy, S., Rana, J., Sharma, P., & Das, S. R. (2024). Comparative performance investigation and sustainability assessment in electrical discharge machining of SS316 using different dielectrics. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238(7), 2718-2733.

Panda, D., Sahu, S. K., & Das, S. R. (2024). Comparative performance evaluation and economic assessment between traditional and vibration assisted EDM during machining of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 09544062241244949.

Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. (2024). Comparative performance investigation and sustainability evaluation between hot-AJM and AJM during machining of zirconia ceramic using Al2O3 abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46(5), 263.

Das, A., Kumar, A., Padhan, S., Das, S. R., Satpathy, M. P., & Patel, S. K. (2024). Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: comparative machining performance evaluation and economic assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46(5), 277.

Sethy, S., Das, S. R., Rana, J., Behera, A. K., & Gupta, M. K. (2024). Performance evaluation and economic assessment in electrical discharge machining of SS316 using graphite powder dispersed in biodegradable palm oil dielectric. Surface Review and Letters, 2450120.

Sarangi, S., Behera, A. K., Bajpai, S., Sahoo, S., Sethy, S., & Das, S. R. (2024). Application of tri-vector analysis to identify the optimum coating thickness in induced draft fans. Surface Review and Letters. https://doi.org/10.1142/S0218625X24501336

Parida, S. P., Mishra, D., Padhy, R. L., Jena, P. C., Das, S. R., Basem, A. A., ... & Elsheikh, A. (2024). Effect of Alkali Treatment on Mechanical and Buckling Behaviour of Natural Fiber Reinforced Composite Cylinder. ES Materials & Manufacturing, 24, 1161.

Parida, S. P., Jena, P. C., Das, S. R., Basem, A., Khatua, A. K., & Elsheikh, A. H. (2024). Transverse vibration of laminated-composite-plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 09544062241256589.

Elsheikh, A. H., Abd Elaziz, M., Das, S. R., Muthuramalingam, T., & Lu, S. (2021). A new optimized predictive model based on political optimizer for eco-friendly MQL-turning of AISI 4340 alloy with nano-lubricants. Journal of Manufacturing Processes, 67, 562-578.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Investigations on surface integrity in hard turning of functionally graded specimen under nano fluid assisted minimum quantity lubrication. Advances in Materials and Processing Technologies, 8(sup3), 1714-1729.

Parida, S. P., Jena, P. C., Das, S. R., Dhupal, D., & Dash, R. R. (2022). Comparative stress analysis of different suitable biomaterials for artificial hip joint and femur bone using finite element simulation. Advances in Materials and Processing Technologies, 8(sup3), 1741-1756.

Lalatendu Dash, Smita Padhan, Anshuman Das, Sudhansu Ranjan Das, “Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, doi:10.1177/0954406221993844 (2021). SCIE

Behera, R. K., Samal, B. P., Panigrahi, S. C., & Das, S. R. (2021). Optimization of erosion wears of Al–Mg–Si–Cu–SiC composite produced by the PM method. Corrosion Reviews, 39(1), 63-75.

Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2021). Machining of hardstone quartz with modified AJM process using hot SiC abrasives: analysis, modeling, optimization, and cost analysis. Surface Review and Letters, 28(02), 2050049.

Dash, L., Padhan, S., & Das, S. R. (2020). Design optimization for analysis of surface integrity and chip morphology in hard turning. Structural Engineering and Mechanics, An Int'l Journal, 76(5), 561-578.

Dash, L., Padhan, S., & Das, S. R. (2020). Experimental investigations on surface integrity and chip morphology in hard tuning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42(10), 500.

Pradhan, S., Das, S. R., & Dhupal, D. (2021). Performance evaluation of recently developed new process HAJM during machining hardstone quartz using hot silicon carbide abrasives: an experimental investigation and sustainability assessment. Silicon, 13(9), 2895-2919.

Padhan, S., Dash, L., Behera, S. K., & Das, S. R. (2020). Modeling and optimization of power consumption for economic analysis, energy-saving carbon footprint analysis, and sustainability assessment in finish hard turning under graphene nanoparticle–assisted minimum quantity lubrication. Process Integration and Optimization for Sustainability, 4, 445-463.

Naik, S., Das, S. R., & Dhupal, D. (2020). Analysis, predictive modelling and multi-response optimization in electrical discharge machining of Al-22% SiC metal matrix composite for minimization of surface roughness and hole overcut. Manufacturing Review, 7, 20.

Naik, S., Das, S. R., & Dhupal, D. (2021). Experimental investigation, predictive modeling, parametric optimization and cost analysis in electrical discharge machining of Al-SiC metal matrix composite. Silicon, 13, 1017-1040.

Panda, A., Das, S. R., & Dhupal, D. (2020). Machinability investigation and sustainability assessment in FDHT with coated ceramic tool. Steel and Composite Structures, An International Journal, 34(5), 681-698.

Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts. Mechanics & Industry, 21(1), 110.

Padhan, S., Das, A., Santoshwar, A., Dharmendrabhai, T. R., & Das, S. R. (2021). Sustainability assessment and machinability investigation of austenitic stainless steel in finish turning with advanced ultra-hard SiAlON ceramic tool under different cutting environments. Silicon, 13, 119-147.

Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2020). Performance evaluation of aluminium oxide nano particles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. Scientia Iranica, 27(6), 2838-2852.

Pradhan, S., Dhupal, D., Das, S. R., & Jena, P. C. (2021). Experimental investigation and optimization on machined surface of Si3N4 ceramic using hot SiC abrasive in HAJM. Materials Today: Proceedings, 44, 1877-1887.

Pradhan, S., Tripathy, S. S., Sahu, S., Das, S. R., Jena, P. C., & Dhupal, D. (2020). Investigation on MRR and DOC of the micro-holes generated on quartz using silicon carbide by FB-HAJM. Materials Today: Proceedings, 26, 2005-2012.

Behera, R. K., & Das, S. R. (2019). Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic. Matériaux & Techniques, 107(6), 603.

Das, A., Pradhan, O., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). Performance appraisal of various nanofluids during hard machining of AISI 4340 steel. Journal of Manufacturing Processes, 46, 248-270.

Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel. Machining Science and Technology, 24(2), 291-320.

Das, A., Patel, S. K., & Das, S. R. (2019). Performance comparison of vegetable oil based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication. Mechanics & Industry, 20(5), 506.

Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryo treated cermet inserts. Journal of Superhard Materials, 41, 247-264.

Panda, A., Ranjan Das, S., & Dhupal, D. (2019). Machinability investigation of HSLA steel in hard turning with coated ceramic tool: assessment, modeling, optimization and economic aspects. Journal of Advanced Manufacturing Systems, 18(04), 625-655.

Das, A., Tirkey, N., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). A comparison of machinability in hard turning of EN-24 alloy steel under mist cooled and dry cutting environments with a coated cermet tool. Journal of Failure Analysis and Prevention, 19, 115-130.

Dixit, S. R., Das, S. R., & Dhupal, D. (2019). Parametric optimization of Nd: YAG laser microgrooving on aluminum oxide using integrated RSM-ANN-GA approach. Journal of Industrial Engineering International, 15, 333-349.

Anand, A., Behera, A. K., & Das, S. R. (2019). An overview on economic machining of hardened steels by hard turning and its process variables. Manufacturing Review, 6, 4.

DHUPAL, D., DIXIT, S. R., & DAS, S. R. (2018). Optimization of process parameters in laser microgrooving of alumina ceramic using genetic algorithm. UPB Sci. Bull., 80, 163-178.

Dhupal, D., Mohanty, S., Dixit, S. R., Das, S. R., & Nanda, B. K. (2018). Micromachining on Al-SiC based metal matrix composite using DPSS laser. Materials Today: Proceedings, 5(5), 11304-11318.

Dhupal, D., Naik, S., & Das, S. R. (2018). Modelling and optimization of Al–SiC MMC through EDM process using copper and brass electrodes. Materials Today: Proceedings, 5(5), 11295-11303.

Das, S. R., Panda, A., & Dhupal, D. (2018). Hard turning of AISI 4340 steel using coated carbide insert: Surface roughness, tool wear, chip morphology and cost estimation. Materials Today: Proceedings, 5(2), 6560-6569.

Nanda, B. K., Dhupal, D., Buda, D., & Das, S. R. (2018). Abrasive jet drilling of alumina ceramic with pressurized-fluidized bed set-up. Materials Today: Proceedings, 5(5), 12570-12578.

Panda, A., Das, S. R., & Dhupal, D. (2017). Surface roughness analysis for economical feasibility study of coated ceramic tool in hard turning operation. Process Integration and Optimization for Sustainability, 1, 237-249.

Das, S. R., Panda, A., & Dhupal, D. (2017). Experimental investigation of surface roughness, flank wear, chip morphology and cost estimation during machining of hardened AISI 4340 steel with coated carbide insert. Mechanics of Advanced Materials and Modern Processes, 3, 1-14.

Das, S. R., Kumar, A., & Dhupal, D. (2016). Experimental investigation on cutting force and surface roughness in machining of hardened AISI 52100 steel using cBN tool. International Journal of Machining and Machinability of Materials, 18(5-6), 501-521.

Das, S. R., Dhupal, D., & Kumar, A. (2015). Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts. Journal of Mechanical Science and Technology, 29, 4329-4340.

Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108-126.

Das, A., Das, S. R., Panda, A., & Patel, S. K. (2022). Experimental investigation into machinability of hardened AISI D6 steel using newly developed AlTiSiN coated carbide tools under sustainable finish dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 236(5), 1889-1905.

Das, A., Padhan, S., & Das, S. R. (2022). Analysis on hole overcut during micro-EDM of Inconel 718. Materials Today: Proceedings, 56, 29-35.

Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2021). Analysis on surface integrity and sustainability assessment in electrical discharge machining of engineered Al-22% SiC metal matrix composite. Rev Metal, 57(4), e210.

Pradhan, S., Sahu, S., Das, S. R., & Dhupal, D. (2021). Experimental study and simulation of surface generation during machining of K-80 alumina ceramic in modified abrasive jet machining with different temperatures using Al2O3 abrasives. International Journal of Abrasive Technology, 10(4), 298-329.

Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2020). Experimental investigation on machining of hardstone quartz with modified AJM using hot silicon carbide abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, 1-22.

Panda, A., Das, S. R., Dhupal, D., & Davim, J. P. (2018). Hard turning of HSLA steel with coated ceramic tool based on evaluation of surface roughness, tool wear, chip morphology and economic analysis. Journal of Manufacturing Technology Research, 10(3/4), 113-141.

Panda, A., Das, S. R., & Dhupal, D. (2018). Experimental investigation, modelling and optimization in hard turning of high strength low alloy steel (AISI 4340). Matériaux & Techniques, 106(4), 404.

Das, S. R., Kumar, A., & Dhupal, D. (2015). Surface roughness analysis of hardened steel using TiN coated ceramic inserts. International Journal of Machining and Machinability of Materials, 17(1), 22-38.

Das, A., Padhan, S., Das, S. R., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2021). Performance assessment and chip morphology evaluation of austenitic stainless steel under sustainable machining conditions. Metals, 11(12), 1931.

Naik, S., Das, S. R., Dhupal, D., & Khatua, A. K. (2022). Electrical discharge machining of engineered Al-22% SiC metal matrix composite: surface roughness analysis, optimization, economic analysis, and sustainability assessment. Process Integration and Optimization for Sustainability, 1-29.

Behera, R. K., Samal, B. P., Panigrahi, S. C., Das, S. R., Mohamed, A., Muduli, K., ... & Das, R. (2022). Experimental analysis on machinability aspects of sintered aluminium metal matrix (Al+ Si+ Mg+ Cu+ SiC) composite-a novel product produced by powder metallurgy method. International Journal of Materials Engineering Innovation, 13(1), 1-22.

Das, A., Gautam, A., Panda, A., Das, S. R., Debnath, K., Ramakrishna, C., & Patel, S. K. (2022). Comparative performance evaluation between uncoated and TiAlN+ AlCrN coated carbide tools in hard turning of AISI H11 steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089221110430.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Machining performance evaluation under recently developed sustainable HAJM process of zirconia ceramic using hot SiC abrasives: An experimental and simulation approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(2), 1009-1035.

Rout, B., Dash, R., Dhupal, D., & Das, S. R. (2022). Optimized posture prediction for task specific during stacking process using human upper body movements. International Journal on Interactive Design and Manufacturing (IJIDeM), 16(1), 291-303.

Das, A., Kamal, M., Das, S. R., Patel, S. K., Panda, A., Rafighi, M., & Biswal, B. B. (2022). Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(6), 3174-3197.

Padhan, S., Das, S. R., Das, A., Alsoufi, M. S., Ibrahim, A. M. M., & Elsheikh, A. (2022). Machinability investigation of Nitronic 60 steel turning using SiAlON ceramic tools under different cooling/lubrication conditions. Materials, 15(7), 2368.

Das, A., Gupta, M. K., Das, S. R., Panda, A., Patel, S. K., & Padhan, S. (2022). Hard turning of AISI D6 steel with recently developed HSN2-TiAlxN and conventional TiCN coated carbide tools: comparative machinability investigation and sustainability assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(4), 138.

Rafighi, M., Özdemir, M., Das, A., & Das, S. R. (2022). Machinability investigation of cryogenically treated hardened AISI 4140 alloy steel using CBN insert under sustainable finish dry hard turning. Surface Review and Letters, 29(04), 2250047.

Das, A., Mohapatra, S., Gajrani, K. K., Das, S. R., & Patel, S. K. (2022). Comparative performance evaluation between HSN-TiAlxN and TiCN coated carbide tools in hard turning of AISI D6 steel. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 09544054221111884.

Das, A., Das, S. R., Panda, J. P., Dey, A., Gajrani, K. K., Somani, N., & Gupta, N. K. (2022). Machine Learning-based modeling and optimization in hard turning of AISI D6 steel with advanced AlTiSiN-coated carbide inserts to predict surface roughness and other machining characteristics. Surface Review and Letters, 29(10), 2250137.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Investigations on surface integrity in hard turning of functionally graded specimen under nano fluid assisted minimum quantity lubrication. Advances in Materials and Processing Technologies, 8(sup3), 1714-1729.

Rafighi, M., Özdemir, M., ?ahino?lu, A., Kumar, R., & Das, S. R. (2022). Experimental assessment and topsis optimization of cutting force, surface roughness, and sound intensity in hard turning of AISI 52100 steel. Surface Review and Letters, 29(11), 2250150.

Babu, M. N., Anandan, V., Parthasarathi, N. L., Yildirim, C. V., Babu, M. D., & Das, S. R. (2022). Performance analysis in turning of D3 tool steel using silver nanoplatelets as additives under MQL. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(12), 591.

Ibrahim, A. M. M., Omer, M. A., Das, S. R., Li, W., Alsoufi, M. S., & Elsheikh, A. (2022). Evaluating the effect of minimum quantity lubrication during hard turning of AISI D3 steel using vegetable oil enriched with nano-additives. Alexandria Engineering Journal, 61(12), 10925-10938.

Kumar, N., Kumar, A., & Das, S. R. (2023). ELECTROCHEMICAL ARC DRILLING OF NICKEL–TITANIUM SHAPE MEMORY ALLOY USING MOLYBDENUM ELECTRODE: INVESTIGATION, MODELING AND OPTIMIZATION. Surface Review & Letters, 30(8).

Wagri, N. K., Jain, N. K., Petare, A., Das, S. R., Tharwan, M. Y., Alansari, A., ... & Elsheikh, A. (2023). Investigation on the performance of coated carbide tool during dry turning of AISI 4340 alloy steel. Materials, 16(2), 668.

Padhan, S., Wagri, N. K., Dash, L., Das, A., Das, S. R., Rafighi, M., & Sharma, P. (2023). Investigation on surface integrity in hard turning of AISI 4140 steel with SPPP-AlTiSiN coated carbide insert under nano-MQL. Lubricants, 11(2), 49.

Mahapatra, S., Das, A., Jena, P. C., & Das, S. R. (2023). Turning of hardened AISI H13 steel with recently developed S3P-AlTiSiN coated carbide tool using MWCNT mixed nanofluid under minimum quantity lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 237(4), 843-864.

Sharma, P., Soni, H., Sethy, S., Das, S. R., Tharwan, M. Y., Al Sofyani, S., ... & Elsheikh, A. (2023). Surface characterization of SAE 304 after WED cutting: An experimental investigation and optimization. Journal of Materials Research and Technology, 23, 5723-5732.

Mishra, P. C., Roychoudhury, A., Banerjee, A., Saha, N., Das, S. R., & Das, A. (2023). Coated Piston Ring Pack and Cylinder Liner Elastodynamics in Correlation to Piston Subsystem Elastohydrodynamic: Through FEA Modelling. Lubricants, 11(5), 192.

Pittala, R. K., Sharma, P., Anne, G., Patil, S., Varghese, V., Das, S. R., ... & Fernandes, F. (2023). Development and Mechanical Characterization of Ni-Cr Alloy Foam Using Ultrasonic-Assisted Electroplating Coating Technique. Coatings, 13(6), 1002.

Biswal, S., Das, S. R., Saha, N., & Mishra, P. C. (2023). Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environment, Development and Sustainability, 1-32. https://doi.org/10.1007/s10668-023-03752-6

Kumar, N., Kumar, A., Sethy, S., & Das, S. R. (2023). Investigation and optimization in electrochemical arc drilling of Ni55. 7Ti nickel–titanium shape memory alloy with molybdenum electrode. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45(9), 448.

Somani, N., Walia, A. S., Gupta, N. K., Panda, J. P., Das, A., & Das, S. R. (2023). Data driven surrogate model-based optimization of the process parameters in electric discharge machining of D2 steel using Cu-SiC composite tool for the machined surface roughness and the tool wear. Revista de Metalurgia, 59(2), e242-e242.

Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). ANALYSIS ON POWER CONSUMPTION FOR LIFE CYCLE SUSTAINABILITY ASSESSMENT IN HARD TURNING OF AISI 4140 STEEL USING SPPPâ€” AlTiSiN-COATED CARBIDE TOOL UNDER VARIOUS CUTTING ENVIRONMENTS. Surface Review and Letters (SRL), 31(06), 1-26.

Roy, S., Pradhan, A., Padhan, S., Das, A., Das, S. R., & Dhupal, D. (2024). Investigation on Surface Roughness and Power Consumption for Sustainability Assessment in Hard Turning of HSLA Steel With SPPP?AlTiSiN–Coated Carbide Tool Under Various Cooling?Lubrications. Lubrication Science. https://doi.org/10.1002/ls.1717

Das, A., Barrenkala, D., Das, S. R., Patel, S. K., Somani, N., & Kumar, C. S. (2024). Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089231223021.

Dhupal, D., Panigrahi, D., Rout, S., Bhuyan, R. K., Nayak, S., Jena, P. C., & Das, S. R. (2024). Generation of effusion holes on ultra-high temperature alloy by micro electro-discharge machining process. Surface Review and Letters, 31(02), 2450015.

Padhan, S., Das, A., & Das, S. R. (2024). Analysis, modelling and optimization on tool vibration in machining of nitronic 60 with SiAlON ceramic tool. Advances in Materials and Processing Technologies, 1-14.

Roy, S., Das, A., Kumar, R., Das, S. R., Rafighi, M., & Sharma, P. (2024). Exploring the viability of alternative cooling-lubrication strategies in machining processes: A comprehensive review on the performance and sustainability assessment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 09544054241229472.

Sethy, S., Rana, J., Sharma, P., & Das, S. R. (2024). Comparative performance investigation and sustainability assessment in electrical discharge machining of SS316 using different dielectrics. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238(7), 2718-2733.

Panda, D., Sahu, S. K., & Das, S. R. (2024). Comparative performance evaluation and economic assessment between traditional and vibration assisted EDM during machining of Inconel 718. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 09544062241244949.

Samantaray, S. R., Pradhan, S., Dhupal, D., Padhan, S., & Das, S. R. (2024). Comparative performance investigation and sustainability evaluation between hot-AJM and AJM during machining of zirconia ceramic using Al2O3 abrasives. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46(5), 263.

Das, A., Kumar, A., Padhan, S., Das, S. R., Satpathy, M. P., & Patel, S. K. (2024). Hard turning of AISI H10 steel using AlTiN and AlTiSiN coated carbide tools: comparative machining performance evaluation and economic assessment. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 46(5), 277.

Sethy, S., Das, S. R., Rana, J., Behera, A. K., & Gupta, M. K. (2024). Performance evaluation and economic assessment in electrical discharge machining of SS316 using graphite powder dispersed in biodegradable palm oil dielectric. Surface Review and Letters, 2450120.

Sarangi, S., Behera, A. K., Bajpai, S., Sahoo, S., Sethy, S., & Das, S. R. (2024). Application of tri-vector analysis to identify the optimum coating thickness in induced draft fans. Surface Review and Letters. https://doi.org/10.1142/S0218625X24501336

Parida, S. P., Mishra, D., Padhy, R. L., Jena, P. C., Das, S. R., Basem, A. A., ... & Elsheikh, A. (2024). Effect of Alkali Treatment on Mechanical and Buckling Behaviour of Natural Fiber Reinforced Composite Cylinder. ES Materials & Manufacturing, 24, 1161.

Parida, S. P., Jena, P. C., Das, S. R., Basem, A., Khatua, A. K., & Elsheikh, A. H. (2024). Transverse vibration of laminated-composite-plates with fillers under moving mass rested on elastic foundation using higher order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 09544062241256589.

Elsheikh, A. H., Abd Elaziz, M., Das, S. R., Muthuramalingam, T., & Lu, S. (2021). A new optimized predictive model based on political optimizer for eco-friendly MQL-turning of AISI 4340 alloy with nano-lubricants. Journal of Manufacturing Processes, 67, 562-578.

Pradhan, S., Das, S. R., Jena, P. C., & Dhupal, D. (2022). Investigations on surface integrity in hard turning of functionally graded specimen under nano fluid assisted minimum quantity lubrication. Advances in Materials and Processing Technologies, 8(sup3), 1714-1729.

Parida, S. P., Jena, P. C., Das, S. R., Dhupal, D., & Dash, R. R. (2022). Comparative stress analysis of different suitable biomaterials for artificial hip joint and femur bone using finite element simulation. Advances in Materials and Processing Technologies, 8(sup3), 1741-1756.

Lalatendu Dash, Smita Padhan, Anshuman Das, Sudhansu Ranjan Das, “Machinability investigation and sustainability assessment in hard turning of AISI D3 steel with coated carbide tool under nanofluid minimum quantity lubrication-cooling condition”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, doi:10.1177/0954406221993844 (2021). SCIE

Behera, R. K., Samal, B. P., Panigrahi, S. C., & Das, S. R. (2021). Optimization of erosion wears of Al–Mg–Si–Cu–SiC composite produced by the PM method. Corrosion Reviews, 39(1), 63-75.

Pradhan, S., Das, S. R., Nanda, B. K., Jena, P. C., & Dhupal, D. (2021). Machining of hardstone quartz with modified AJM process using hot SiC abrasives: analysis, modeling, optimization, and cost analysis. Surface Review and Letters, 28(02), 2050049.

Dash, L., Padhan, S., & Das, S. R. (2020). Design optimization for analysis of surface integrity and chip morphology in hard turning. Structural Engineering and Mechanics, An Int'l Journal, 76(5), 561-578.

Dash, L., Padhan, S., & Das, S. R. (2020). Experimental investigations on surface integrity and chip morphology in hard tuning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42(10), 500.

Pradhan, S., Das, S. R., & Dhupal, D. (2021). Performance evaluation of recently developed new process HAJM during machining hardstone quartz using hot silicon carbide abrasives: an experimental investigation and sustainability assessment. Silicon, 13(9), 2895-2919.

Padhan, S., Dash, L., Behera, S. K., & Das, S. R. (2020). Modeling and optimization of power consumption for economic analysis, energy-saving carbon footprint analysis, and sustainability assessment in finish hard turning under graphene nanoparticle–assisted minimum quantity lubrication. Process Integration and Optimization for Sustainability, 4, 445-463.

Naik, S., Das, S. R., & Dhupal, D. (2020). Analysis, predictive modelling and multi-response optimization in electrical discharge machining of Al-22% SiC metal matrix composite for minimization of surface roughness and hole overcut. Manufacturing Review, 7, 20.

Naik, S., Das, S. R., & Dhupal, D. (2021). Experimental investigation, predictive modeling, parametric optimization and cost analysis in electrical discharge machining of Al-SiC metal matrix composite. Silicon, 13, 1017-1040.

Panda, A., Das, S. R., & Dhupal, D. (2020). Machinability investigation and sustainability assessment in FDHT with coated ceramic tool. Steel and Composite Structures, An International Journal, 34(5), 681-698.

Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts. Mechanics & Industry, 21(1), 110.

Padhan, S., Das, A., Santoshwar, A., Dharmendrabhai, T. R., & Das, S. R. (2021). Sustainability assessment and machinability investigation of austenitic stainless steel in finish turning with advanced ultra-hard SiAlON ceramic tool under different cutting environments. Silicon, 13, 119-147.

Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2020). Performance evaluation of aluminium oxide nano particles in cutting fluid with minimum quantity lubrication technique in turning of hardened AISI 4340 alloy steel. Scientia Iranica, 27(6), 2838-2852.

Pradhan, S., Dhupal, D., Das, S. R., & Jena, P. C. (2021). Experimental investigation and optimization on machined surface of Si3N4 ceramic using hot SiC abrasive in HAJM. Materials Today: Proceedings, 44, 1877-1887.

Pradhan, S., Tripathy, S. S., Sahu, S., Das, S. R., Jena, P. C., & Dhupal, D. (2020). Investigation on MRR and DOC of the micro-holes generated on quartz using silicon carbide by FB-HAJM. Materials Today: Proceedings, 26, 2005-2012.

Behera, R. K., & Das, S. R. (2019). Modelling and optimization of technological parameters in hot abrasive jet machining of alumina ceramic. Matériaux & Techniques, 107(6), 603.

Das, A., Pradhan, O., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). Performance appraisal of various nanofluids during hard machining of AISI 4340 steel. Journal of Manufacturing Processes, 46, 248-270.

Das, A., Das, S. R., Patel, S. K., & Biswal, B. B. (2020). Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel. Machining Science and Technology, 24(2), 291-320.

Das, A., Patel, S. K., & Das, S. R. (2019). Performance comparison of vegetable oil based nanofluids towards machinability improvement in hard turning of HSLA steel using minimum quantity lubrication. Mechanics & Industry, 20(5), 506.

Das, A., Patel, S. K., Biswal, B. B., & Das, S. R. (2019). Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryo treated cermet inserts. Journal of Superhard Materials, 41, 247-264.

Panda, A., Ranjan Das, S., & Dhupal, D. (2019). Machinability investigation of HSLA steel in hard turning with coated ceramic tool: assessment, modeling, optimization and economic aspects. Journal of Advanced Manufacturing Systems, 18(04), 625-655.

Das, A., Tirkey, N., Patel, S. K., Das, S. R., & Biswal, B. B. (2019). A comparison of machinability in hard turning of EN-24 alloy steel under mist cooled and dry cutting environments with a coated cermet tool. Journal of Failure Analysis and Prevention, 19, 115-130.

Dixit, S. R., Das, S. R., & Dhupal, D. (2019). Parametric optimization of Nd: YAG laser microgrooving on aluminum oxide using integrated RSM-ANN-GA approach. Journal of Industrial Engineering International, 15, 333-349.

Anand, A., Behera, A. K., & Das, S. R. (2019). An overview on economic machining of hardened steels by hard turning and its process variables. Manufacturing Review, 6, 4.

DHUPAL, D., DIXIT, S. R., & DAS, S. R. (2018). Optimization of process parameters in laser microgrooving of alumina ceramic using genetic algorithm. UPB Sci. Bull., 80, 163-178.

Dhupal, D., Mohanty, S., Dixit, S. R., Das, S. R., & Nanda, B. K. (2018). Micromachining on Al-SiC based metal matrix composite using DPSS laser. Materials Today: Proceedings, 5(5), 11304-11318.

Dhupal, D., Naik, S., & Das, S. R. (2018). Modelling and optimization of Al–SiC MMC through EDM process using copper and brass electrodes. Materials Today: Proceedings, 5(5), 11295-11303.

Das, S. R., Panda, A., & Dhupal, D. (2018). Hard turning of AISI 4340 steel using coated carbide insert: Surface roughness, tool wear, chip morphology and cost estimation. Materials Today: Proceedings, 5(2), 6560-6569.

Nanda, B. K., Dhupal, D., Buda, D., & Das, S. R. (2018). Abrasive jet drilling of alumina ceramic with pressurized-fluidized bed set-up. Materials Today: Proceedings, 5(5), 12570-12578.

Panda, A., Das, S. R., & Dhupal, D. (2017). Surface roughness analysis for economical feasibility study of coated ceramic tool in hard turning operation. Process Integration and Optimization for Sustainability, 1, 237-249.

Das, S. R., Panda, A., & Dhupal, D. (2017). Experimental investigation of surface roughness, flank wear, chip morphology and cost estimation during machining of hardened AISI 4340 steel with coated carbide insert. Mechanics of Advanced Materials and Modern Processes, 3, 1-14.

Das, S. R., Kumar, A., & Dhupal, D. (2016). Experimental investigation on cutting force and surface roughness in machining of hardened AISI 52100 steel using cBN tool. International Journal of Machining and Machinability of Materials, 18(5-6), 501-521.

Das, S. R., Dhupal, D., & Kumar, A. (2015). Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts. Journal of Mechanical Science and Technology, 29, 4329-4340.

Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108-126.

72. N. Sarkar, G. Sahoo, R. Das, G. Prusty and S. K. Swain* “Carbon quantum dot tailored calcium alginate hydrogel for pH responsive controlled delivery of vancomycin” European Journal of Pharmaceutical Sciences, 109, 359-371, (Elsevier), (2017). (Impact Factor: 4.7) ISSN:0928-0987. DOI: https://doi.org/10.1016/j.ejps.2017.08.015

Tarun Sethi, Rupelirupanita Dash , Tunirani Nayak, â€œa Comparison of Bilateral Filter and direction based Adaptive Weighted Switching Bilateral Filter for removing mixed noise in image processingâ€, International Journal of Innovative Research in Technology & Science(IJIRTS), VOLUME 3, NUMBER3, ISSN:2321-1156

Tarun Sethi, Rupelirupanita Dash , Tunirani Nayak, â€œa Comparison of Bilateral Filter and direction based Adaptive Weighted Switching Bilateral Filter for removing mixed noise in image processingâ€, International Journal of Innovative Research in Technology & Science(IJIRTS), VOLUME 3, NUMBER3, ISSN:2321-1156

Tarun Sethi, Rupelirupanita Dash , Tunirani Nayak, â€œa Comparison of Bilateral Filter and direction based Adaptive Weighted Switching Bilateral Filter for removing mixed noise in image processingâ€, International Journal of Innovative Research in Technology & Science(IJIRTS), VOLUME 3, NUMBER3, ISSN:2321-1156

S. Sarangi, N. P. Rath and H. K. Sahoo, "A Comparative Study of Filters for Denoising Mammograms," 2021 International Conference on Intelligent Technologies (CONIT), Hubli, India, 2021, pp. 1-5, doi: 10.1109/CONIT51480.2021.9498526.

R. N. Patro, H. K. Sahoo and P. K. Biswal, "Dual Histogram Based RVIN detector and Hybrid Gaussian Filter," 2021 IEEE 4th International Conference on Computing, Power and Communication Technologies (GUCON), Kuala Lumpur, Malaysia, 2021, pp. 1-8, doi: 10.1109/GUCON50781.2021.9573672

H.K.Sahoo et al., "INGR Roadmap Massive MIMO Chapter," 2022 IEEE Future Networks World Forum (FNWF), Montreal, QC, Canada, 2022, pp. 1-51, doi: 10.1109/FNWF55208.2022.00138

H. K.Sahoo et al., "INGR Roadmap Massive MIMO Chapter," 2023 IEEE Future Networks World Forum (FNWF), Baltimore, MD, USA, 2023, pp. 1-70, doi: 10.1109/FNWF58287.2023.10520592.

L. Ghadei and H. K. Sahoo, "BER Performance Analysis For Outdoor Wireless Channels Using Low Complexity Neural Equalizer," 2024 IEEE 3rd International Conference on Control, Instrumentation, Energy & Communication (CIEC), Kolkata, India, 2024, pp. 367-371, doi: 10.1109/CIEC59440.2024.10468249

Umamani Subudhi, Harish Kumar Sahoo, "Adaptive estimation of sequence components for three-phase unbalanced system using fractional LMS/F algorithm" , Springer Electrical Engineering, Volume 104, pages 1757–1768, 2022

Swetaleena Sahoo, Harish Kumar Sahoo, Sarita Nanda, "Energy efficient equalizer design for MIMO OFDM communication systems using improved split complex extreme learning machine", Springer Signal, Image and Video Processing,Volume 16, pp. 349–357, 2022

Madhusmita Sahoo, Harish Kumar Sahoo, "Performance Analysis of 5 G Wireless Hybrid Precoding Using Evolutionary Algorithms", Springer Journal of Bionic Engineering, Volume 20, pp. 2317–2330, 2023

Swetaleena Sahoo, Manidipa Sarkar, Harish Kumar Sahoo & Sarita Nanda, "Multiuser hybrid precoder design using logarithmic hyperbolic filtering for millimeter wave communication systems", Volume 30, pp.139–150, 2024

Madhusmita Sahoo, Harish Kumar Sahoo, "Optimal multiuser uplink data detection for 5G communication networks", Springer International Journal of Information Technology, Volume 16, pp. 1407–1418, 2024

PK Ray, HK Sahoo, A Mohanty, J khan Bhutto, ABA Barnawi, AA Alshaya, "Robust H-infinity Filter and PSO-SVM Based Monitoring of Power Quality Disturbances system" IEEE Access, DOI: 10.1109/ACCESS.2024.3367727

S.Sarangi,N.P. Rath, H.K.Sahoo, "Mammogram Mass Segmentation and Detection using Legendre Neural Network based Optimal Threshold" Accepted in Springer Medical & Biological Engineering & Computing, 2021

Patro, R. N., Subudhi, S., Biswal, P. K., Dell’Acqua, F., & Sahoo, H. K. (2021). Error removal by energy scaling from hyperspectral images for performance improvement of spectral classifiers. International Journal of Remote Sensing, 42(20), 7863–7879. https://doi.org/10.1080/01431161.2021.1966851

B. Mohanty, H.K.Sahoo, â€œEfficient Beamformer for Low Mobility Indoor Communication Using Sparse Adaptive Algorithmâ€, Springer Wireless Personal Communications,vol.116, issue 5 pages1621â€“1637,2021, 10.1007/s11277-020-07752-x

B. Mohanty, H.K.Sahoo, B.Patnaik, â€œWireless channel estimation and beamforming by using block sparse adaptive filteringâ€, Springer Signal, Image and Video Processing, 2020,https://doi.org/10.1007/s11760-020-01795-0

Ram Narayan Patro, Subhashree Subudhi, Pradyut Kumar Biswal, FabioDellâ€™Acqua , Harish Kumar Sahoo, "Conditional nearest regularized subspace classifiers: a fast classification approach for HSI" International Journal of Remote Sensing(Taylor and Francis), vol. 40, issue 24,2019, https://doi.org/10.1080/01431161.2019.1629717

B.Mohanty,Harish K. Sahoo, and B.Patnaik, "Block NLMS/F Equalizer Design and Channel Capacity Analysis for Indoor IEEE 802.11 Fading Wireless Channels", Springer Signal, Image and Video Processing, vol.13,pp. 693-701, 2019, DOI: 10.1007/s11760-018-1398-2

Harish K. Sahoo, B.Mohanty and B.Patnaik, "Block and Fast Block Sparse Adaptive Filtering for Outdoor Wireless Channel Estimation and Equalization", Springer Wireless Personal Communications,vol. 98,issue 3, pp.3003-3019, 2018

U.Subudhi , Harish K. Sahoo and Sajeev K. Mishra, â€œHarmonics and Decaying DC Estimation Using Volterra LMS/F Algorithmâ€ IEEE Transactions on Industry Applications,vol. 54,issue 2, pp.1108-1118, Mar-Apr 2018

U.Subudhi , Harish K. Sahoo and Sajeev K. Mishra, " Tracking of power quality disturbances using sparse modelâ€“based extended Kalman filters", International Journal of Adaptive Control and Signal Processing(Wiley), vol. 32,issue 10, pp. 1489-1507, Oct. 2018

H.K. Sahoo and P.K. Dash, â€œTracking of non-stationary distorted power signals using complex Hâˆž filterâ€, Inderscience International Journal of Automation and Control, vol. 5,pp. 22-43,2011

H.K. Sahoo ,P.K. Dash and N.P. Rath, â€œFrequency estimation of distorted non-stationary signals using complex Hâˆž filterâ€, Elsevier, International Journal of Electronics and Communications, vol. 66,pp.267-274,2012

H.K. Sahoo, P.K. Dash and N.P. Rath, â€œNARX model based nonlinear dynamic system identification using low complexity neural networks and robust Hâˆž filterâ€ Elsevier Applied Soft Computing, vol. 13, pp.3324-3334, 2013

Harish K. Sahoo and P.K. Dash, â€œRobust Estimation of Power quality disturbances using unscented Hâˆž filterâ€, Elsevier International journal of Electrical Power & Energy Systems, vol. 73, pp.438-447, 2015

S. Sarangi, N. P. Rath and H. K. Sahoo, "A Comparative Study of Filters for Denoising Mammograms," 2021 International Conference on Intelligent Technologies (CONIT), Hubli, India, 2021, pp. 1-5, doi: 10.1109/CONIT51480.2021.9498526.

R. N. Patro, H. K. Sahoo and P. K. Biswal, "Dual Histogram Based RVIN detector and Hybrid Gaussian Filter," 2021 IEEE 4th International Conference on Computing, Power and Communication Technologies (GUCON), Kuala Lumpur, Malaysia, 2021, pp. 1-8, doi: 10.1109/GUCON50781.2021.9573672

H.K.Sahoo et al., "INGR Roadmap Massive MIMO Chapter," 2022 IEEE Future Networks World Forum (FNWF), Montreal, QC, Canada, 2022, pp. 1-51, doi: 10.1109/FNWF55208.2022.00138

H. K.Sahoo et al., "INGR Roadmap Massive MIMO Chapter," 2023 IEEE Future Networks World Forum (FNWF), Baltimore, MD, USA, 2023, pp. 1-70, doi: 10.1109/FNWF58287.2023.10520592.

L. Ghadei and H. K. Sahoo, "BER Performance Analysis For Outdoor Wireless Channels Using Low Complexity Neural Equalizer," 2024 IEEE 3rd International Conference on Control, Instrumentation, Energy & Communication (CIEC), Kolkata, India, 2024, pp. 367-371, doi: 10.1109/CIEC59440.2024.10468249

Umamani Subudhi, Harish Kumar Sahoo, "Adaptive estimation of sequence components for three-phase unbalanced system using fractional LMS/F algorithm" , Springer Electrical Engineering, Volume 104, pages 1757–1768, 2022

Swetaleena Sahoo, Harish Kumar Sahoo, Sarita Nanda, "Energy efficient equalizer design for MIMO OFDM communication systems using improved split complex extreme learning machine", Springer Signal, Image and Video Processing,Volume 16, pp. 349–357, 2022

Madhusmita Sahoo, Harish Kumar Sahoo, "Performance Analysis of 5 G Wireless Hybrid Precoding Using Evolutionary Algorithms", Springer Journal of Bionic Engineering, Volume 20, pp. 2317–2330, 2023

Swetaleena Sahoo, Manidipa Sarkar, Harish Kumar Sahoo & Sarita Nanda, "Multiuser hybrid precoder design using logarithmic hyperbolic filtering for millimeter wave communication systems", Volume 30, pp.139–150, 2024

Madhusmita Sahoo, Harish Kumar Sahoo, "Optimal multiuser uplink data detection for 5G communication networks", Springer International Journal of Information Technology, Volume 16, pp. 1407–1418, 2024

PK Ray, HK Sahoo, A Mohanty, J khan Bhutto, ABA Barnawi, AA Alshaya, "Robust H-infinity Filter and PSO-SVM Based Monitoring of Power Quality Disturbances system" IEEE Access, DOI: 10.1109/ACCESS.2024.3367727

S.Sarangi,N.P. Rath, H.K.Sahoo, "Mammogram Mass Segmentation and Detection using Legendre Neural Network based Optimal Threshold" Accepted in Springer Medical & Biological Engineering & Computing, 2021

Patro, R. N., Subudhi, S., Biswal, P. K., Dell’Acqua, F., & Sahoo, H. K. (2021). Error removal by energy scaling from hyperspectral images for performance improvement of spectral classifiers. International Journal of Remote Sensing, 42(20), 7863–7879. https://doi.org/10.1080/01431161.2021.1966851

B. Mohanty, H.K.Sahoo, â€œEfficient Beamformer for Low Mobility Indoor Communication Using Sparse Adaptive Algorithmâ€, Springer Wireless Personal Communications,vol.116, issue 5 pages1621â€“1637,2021, 10.1007/s11277-020-07752-x

B. Mohanty, H.K.Sahoo, B.Patnaik, â€œWireless channel estimation and beamforming by using block sparse adaptive filteringâ€, Springer Signal, Image and Video Processing, 2020,https://doi.org/10.1007/s11760-020-01795-0

Ram Narayan Patro, Subhashree Subudhi, Pradyut Kumar Biswal, FabioDellâ€™Acqua , Harish Kumar Sahoo, "Conditional nearest regularized subspace classifiers: a fast classification approach for HSI" International Journal of Remote Sensing(Taylor and Francis), vol. 40, issue 24,2019, https://doi.org/10.1080/01431161.2019.1629717

B.Mohanty,Harish K. Sahoo, and B.Patnaik, "Block NLMS/F Equalizer Design and Channel Capacity Analysis for Indoor IEEE 802.11 Fading Wireless Channels", Springer Signal, Image and Video Processing, vol.13,pp. 693-701, 2019, DOI: 10.1007/s11760-018-1398-2

Harish K. Sahoo, B.Mohanty and B.Patnaik, "Block and Fast Block Sparse Adaptive Filtering for Outdoor Wireless Channel Estimation and Equalization", Springer Wireless Personal Communications,vol. 98,issue 3, pp.3003-3019, 2018

U.Subudhi , Harish K. Sahoo and Sajeev K. Mishra, â€œHarmonics and Decaying DC Estimation Using Volterra LMS/F Algorithmâ€ IEEE Transactions on Industry Applications,vol. 54,issue 2, pp.1108-1118, Mar-Apr 2018

U.Subudhi , Harish K. Sahoo and Sajeev K. Mishra, " Tracking of power quality disturbances using sparse modelâ€“based extended Kalman filters", International Journal of Adaptive Control and Signal Processing(Wiley), vol. 32,issue 10, pp. 1489-1507, Oct. 2018

H.K. Sahoo and P.K. Dash, â€œTracking of non-stationary distorted power signals using complex Hâˆž filterâ€, Inderscience International Journal of Automation and Control, vol. 5,pp. 22-43,2011

H.K. Sahoo ,P.K. Dash and N.P. Rath, â€œFrequency estimation of distorted non-stationary signals using complex Hâˆž filterâ€, Elsevier, International Journal of Electronics and Communications, vol. 66,pp.267-274,2012

H.K. Sahoo, P.K. Dash and N.P. Rath, â€œNARX model based nonlinear dynamic system identification using low complexity neural networks and robust Hâˆž filterâ€ Elsevier Applied Soft Computing, vol. 13, pp.3324-3334, 2013

Harish K. Sahoo and P.K. Dash, â€œRobust Estimation of Power quality disturbances using unscented Hâˆž filterâ€, Elsevier International journal of Electrical Power & Energy Systems, vol. 73, pp.438-447, 2015

Parida, Prasanta Kumar, Lingraj Dora, Monorama Swain, Sanjay Agrawal, and Rutuparna Panda. "Data science methodologies in smart healthcare: a review." Health and Technology 12, no. 2 (2022): 329-344.

S. N. Mishra, D. Konhar, D. Mishra, R. K. Mishra â€œOn the possibility of linear polarization in elliptical microstrip patch antennaâ€,Microwave and Optical Technology Letters,Wiley, 2019, 61(4), pp.1048-1051.

A. K. Behera, D. Konhar, D. Mishra, S. N. Mishra â€œA Fibonacci series-inspired-elliptically-slotted CPW fed UWB patch antenna with Ku band-reject characteristicsâ€,Microwave and Optical Technology Letters,Wiley, 2021, 63(11), pp.2840-2845.

D. Konhar,A. K. Behera,S. N. Mishra,D. Mishra, â€œA High Gain Elliptical Slot Antenna for Lower C-band and X-band Applicationâ€,Journal of King Saud University â€“ Engineering Sciences,Elsivere, 2022, 34(2), pp.108-115.

Samita Rani Pani, Rajat Kanti Samal, Evaluation of power grid vulnerability indices accounting for wind power uncertainty, Sustainable Energy, Grids and Networks, Volume 38, 2024, 101354, ISSN 2352-4677, https://doi.org/10.1016/j.segan.2024.101354.

Samita Rani Pani, Rajat Kanti Samal, Evaluation of reliability and resilience in wind integrated power systems using 80 meter mast measurements, Electric Power Systems Research, Volume 241, 2025, 111263, ISSN 0378-7796, https://doi.org/10.1016/j.epsr.2024.111263.

Samal, R.K. Performance of Metaheuristic Algorithms for Wind Resource Modelling: A Comparison Using 80 m Mast Measurements. Arabian Journal for Science and Engineering, (2024). https://doi.org/10.1007/s13369-024-08839-4

Samal, R.K. A Comparison of Cost and Emission Reduction Efficacy of Wind Energy in Hydrothermal Systems. Iranian Journal of Science and Technology, Transactions of Electrical Engineering(2023). https://doi.org/10.1007/s40998-023-00654-1

Rajat Kanti Samal (2022) Techno-economic analysis and wind resource assessment for Odisha, India using reanalysis and 80 m mast measurements: a preliminary assessment for policy-makers, International Journal of Ambient Energy, DOI: 10.1080/01430750.2022.2137581

Rajat Kanti Samal, Assessment of wind energy potential using reanalysis data: A comparison with mast measurements, Journal of Cleaner Production, Volume 313, 2021, 127933, ISSN 0959-6526, https://doi.org/10.1016/j.jclepro.2021.127933

Rajat Kanti Samal (2021): Probabilistic Modelling of 80 m Mast Measured Wind Resource: A case study., Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, DOI: 10.1080/15567036.2021.1910753

Rajat Kanti Samal, M. Tripathy, Cost savings and emission reduction capability of wind-integrated power systems, International Journal of Electrical Power & Energy Systems, Volume 104, 2019, Pages 549-561, ISSN 0142-0615, https://doi.org/10.1016/j.ijepes.2018.07.039.

Rajat Kanti Samal & Manish Tripathy (2018): Estimating wind speed probability distribution based on measured data at Burla in Odisha, India, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects,Â DOI: 10.1080/15567036.2018.1521888.

Rajat Kanti Samal, M. Tripathy, Cost and emission additionality of wind energy in power systems, Sustainable Energy, Grids and Networks, Volume 17, 2019, 100179, ISSN 2352-4677, https://doi.org/10.1016/j.segan.2018.12.001

M. Tripathy, Rajat Kanti Samal, A new perspective on wind integrated optimal power flow considering turbine characteristics, wind correlation and generator reactive limits, Electric Power Systems Research, Volume 170, 2019, Pages 101-115, ISSN 0378-7796, https://doi.org/10.1016/j.epsr.2019.01.018.

Rajat Kanti Samal, M. Tripathy, A novel distance metric for evaluating impact of wind integration on power systems, Renewable Energy, Volume 140, 2019, Pages 722-736, ISSN 0960-1481, https://doi.org/10.1016/j.renene.2019.03.094.

A Mohanty, B Rout, C Prusty, S Panda, Islanding detection using SCHO-NN method for distributed generation system, Electrical Engineering, Springer Berlin Heidelberg, Vol-107,pp11773–11787,May 2025, https://doi.org/10.1007/s00202-025-03121-8

C. Prusty, B. Rout, S. Chirantan, Optimizing Model Predictive Control for Frequency Stabilization in Marine Microgrids Using Hybrid Optimization Algorithms, Journal of Dynamic Systems, Measurement and Control. ASME, 148(4): 041011 (14 pages), https://doi.org/10.1115/1.4070882

M. K. Kar, A K Singh, S. Kumar B. Rout, Application of Fractional PID controller to improve stability of a single machine infinite bus system, Journal of The Institution of Engineers (India); Series B, Vol 105, (1),pp-77-92, Dec-2023

A. Mohanty, B. Rout, Solar PV Transient Mitigation using Superimposed Sliding Mode-Perturb and Observe MPPT under Varying Irradiation Conditions, Journal of Scientific & Industrial Research,Vol. 82, June 2023, pp. 609-615,, June 2023

A. Mohanty, B. Rout, R. Panigrahi, A comparative Studies on different islanding detection methods for distributed generation systems, ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS, Volume 45(1),pp-2284-2316, March-2023

B. Rout, B.B. Pati and S Panda, A hybrid modified differential evolution-pattern search approach for SSSC based damping controller design under communication constraints, International Journal of System Assurance Engg.Management, Volume 9, Issue 4, pp 962-971, Springer, 16 Jan, 2018

B. Rout, B.B. Pati, S. Panda, Modified Algorithm for SSSC Damping Controller Design in Power System, ECTI Transactions on Electrical Engineering, Electronics and Communications, Volume.16, No.1, pp.46-63, February 2018

B. Rout, B. B. Pati, MFO Optimized Fractional Based Controller on Power System Stability, Proceedings of Engineering and Technology Innovation, Vol.8, pp.46-59, 2018.

M. K. Kar, B. Rout and J. K. Moharana, Improvement of power factor of a grid connected load system using static compensator," Journal for Foundations and Applications of Physics", 1 (1), pp. 5-10, 2014

Samita Rani Pani, Rajat Kanti Samal, Evaluation of power grid vulnerability indices accounting for wind power uncertainty, Sustainable Energy, Grids and Networks, Volume 38, 2024, 101354, ISSN 2352-4677, https://doi.org/10.1016/j.segan.2024.101354.

Samita Rani Pani, Rajat Kanti Samal, Evaluation of reliability and resilience in wind integrated power systems using 80 meter mast measurements, Electric Power Systems Research, Volume 241, 2025, 111263, ISSN 0378-7796, https://doi.org/10.1016/j.epsr.2024.111263.

Samal, R.K. Performance of Metaheuristic Algorithms for Wind Resource Modelling: A Comparison Using 80 m Mast Measurements. Arabian Journal for Science and Engineering, (2024). https://doi.org/10.1007/s13369-024-08839-4

Samal, R.K. A Comparison of Cost and Emission Reduction Efficacy of Wind Energy in Hydrothermal Systems. Iranian Journal of Science and Technology, Transactions of Electrical Engineering(2023). https://doi.org/10.1007/s40998-023-00654-1

Rajat Kanti Samal (2022) Techno-economic analysis and wind resource assessment for Odisha, India using reanalysis and 80 m mast measurements: a preliminary assessment for policy-makers, International Journal of Ambient Energy, DOI: 10.1080/01430750.2022.2137581

Rajat Kanti Samal, Assessment of wind energy potential using reanalysis data: A comparison with mast measurements, Journal of Cleaner Production, Volume 313, 2021, 127933, ISSN 0959-6526, https://doi.org/10.1016/j.jclepro.2021.127933

Rajat Kanti Samal (2021): Probabilistic Modelling of 80 m Mast Measured Wind Resource: A case study., Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, DOI: 10.1080/15567036.2021.1910753

Rajat Kanti Samal, M. Tripathy, Cost savings and emission reduction capability of wind-integrated power systems, International Journal of Electrical Power & Energy Systems, Volume 104, 2019, Pages 549-561, ISSN 0142-0615, https://doi.org/10.1016/j.ijepes.2018.07.039.

Rajat Kanti Samal & Manish Tripathy (2018): Estimating wind speed probability distribution based on measured data at Burla in Odisha, India, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects,Â DOI: 10.1080/15567036.2018.1521888.

Rajat Kanti Samal, M. Tripathy, Cost and emission additionality of wind energy in power systems, Sustainable Energy, Grids and Networks, Volume 17, 2019, 100179, ISSN 2352-4677, https://doi.org/10.1016/j.segan.2018.12.001

M. Tripathy, Rajat Kanti Samal, A new perspective on wind integrated optimal power flow considering turbine characteristics, wind correlation and generator reactive limits, Electric Power Systems Research, Volume 170, 2019, Pages 101-115, ISSN 0378-7796, https://doi.org/10.1016/j.epsr.2019.01.018.

Rajat Kanti Samal, M. Tripathy, A novel distance metric for evaluating impact of wind integration on power systems, Renewable Energy, Volume 140, 2019, Pages 722-736, ISSN 0960-1481, https://doi.org/10.1016/j.renene.2019.03.094.

Samita Rani Pani, Rajat Kanti Samal, Evaluation of power grid vulnerability indices accounting for wind power uncertainty, Sustainable Energy, Grids and Networks, Volume 38, 2024, 101354, ISSN 2352-4677, https://doi.org/10.1016/j.segan.2024.101354.

Samita Rani Pani, Rajat Kanti Samal, Evaluation of reliability and resilience in wind integrated power systems using 80 meter mast measurements, Electric Power Systems Research, Volume 241, 2025, 111263, ISSN 0378-7796, https://doi.org/10.1016/j.epsr.2024.111263.

Samal, R.K. Performance of Metaheuristic Algorithms for Wind Resource Modelling: A Comparison Using 80 m Mast Measurements. Arabian Journal for Science and Engineering, (2024). https://doi.org/10.1007/s13369-024-08839-4

Samal, R.K. A Comparison of Cost and Emission Reduction Efficacy of Wind Energy in Hydrothermal Systems. Iranian Journal of Science and Technology, Transactions of Electrical Engineering(2023). https://doi.org/10.1007/s40998-023-00654-1

Rajat Kanti Samal (2022) Techno-economic analysis and wind resource assessment for Odisha, India using reanalysis and 80 m mast measurements: a preliminary assessment for policy-makers, International Journal of Ambient Energy, DOI: 10.1080/01430750.2022.2137581

Rajat Kanti Samal, Assessment of wind energy potential using reanalysis data: A comparison with mast measurements, Journal of Cleaner Production, Volume 313, 2021, 127933, ISSN 0959-6526, https://doi.org/10.1016/j.jclepro.2021.127933

Rajat Kanti Samal (2021): Probabilistic Modelling of 80 m Mast Measured Wind Resource: A case study., Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, DOI: 10.1080/15567036.2021.1910753

Rajat Kanti Samal, M. Tripathy, Cost savings and emission reduction capability of wind-integrated power systems, International Journal of Electrical Power & Energy Systems, Volume 104, 2019, Pages 549-561, ISSN 0142-0615, https://doi.org/10.1016/j.ijepes.2018.07.039.

Rajat Kanti Samal & Manish Tripathy (2018): Estimating wind speed probability distribution based on measured data at Burla in Odisha, India, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects,Â DOI: 10.1080/15567036.2018.1521888.

Rajat Kanti Samal, M. Tripathy, Cost and emission additionality of wind energy in power systems, Sustainable Energy, Grids and Networks, Volume 17, 2019, 100179, ISSN 2352-4677, https://doi.org/10.1016/j.segan.2018.12.001

M. Tripathy, Rajat Kanti Samal, A new perspective on wind integrated optimal power flow considering turbine characteristics, wind correlation and generator reactive limits, Electric Power Systems Research, Volume 170, 2019, Pages 101-115, ISSN 0378-7796, https://doi.org/10.1016/j.epsr.2019.01.018.

Rajat Kanti Samal, M. Tripathy, A novel distance metric for evaluating impact of wind integration on power systems, Renewable Energy, Volume 140, 2019, Pages 722-736, ISSN 0960-1481, https://doi.org/10.1016/j.renene.2019.03.094.

Samita Rani Pani, Rajat Kanti Samal, Evaluation of power grid vulnerability indices accounting for wind power uncertainty, Sustainable Energy, Grids and Networks, Volume 38, 2024, 101354, ISSN 2352-4677, https://doi.org/10.1016/j.segan.2024.101354.

Samita Rani Pani, Rajat Kanti Samal, Evaluation of reliability and resilience in wind integrated power systems using 80 meter mast measurements, Electric Power Systems Research, Volume 241, 2025, 111263, ISSN 0378-7796, https://doi.org/10.1016/j.epsr.2024.111263.

Samal, R.K. Performance of Metaheuristic Algorithms for Wind Resource Modelling: A Comparison Using 80 m Mast Measurements. Arabian Journal for Science and Engineering, (2024). https://doi.org/10.1007/s13369-024-08839-4

Samal, R.K. A Comparison of Cost and Emission Reduction Efficacy of Wind Energy in Hydrothermal Systems. Iranian Journal of Science and Technology, Transactions of Electrical Engineering(2023). https://doi.org/10.1007/s40998-023-00654-1

Rajat Kanti Samal (2022) Techno-economic analysis and wind resource assessment for Odisha, India using reanalysis and 80 m mast measurements: a preliminary assessment for policy-makers, International Journal of Ambient Energy, DOI: 10.1080/01430750.2022.2137581

Rajat Kanti Samal, Assessment of wind energy potential using reanalysis data: A comparison with mast measurements, Journal of Cleaner Production, Volume 313, 2021, 127933, ISSN 0959-6526, https://doi.org/10.1016/j.jclepro.2021.127933

Rajat Kanti Samal (2021): Probabilistic Modelling of 80 m Mast Measured Wind Resource: A case study., Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, DOI: 10.1080/15567036.2021.1910753

Rajat Kanti Samal, M. Tripathy, Cost savings and emission reduction capability of wind-integrated power systems, International Journal of Electrical Power & Energy Systems, Volume 104, 2019, Pages 549-561, ISSN 0142-0615, https://doi.org/10.1016/j.ijepes.2018.07.039.

Rajat Kanti Samal & Manish Tripathy (2018): Estimating wind speed probability distribution based on measured data at Burla in Odisha, India, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects,Â DOI: 10.1080/15567036.2018.1521888.

Rajat Kanti Samal, M. Tripathy, Cost and emission additionality of wind energy in power systems, Sustainable Energy, Grids and Networks, Volume 17, 2019, 100179, ISSN 2352-4677, https://doi.org/10.1016/j.segan.2018.12.001

M. Tripathy, Rajat Kanti Samal, A new perspective on wind integrated optimal power flow considering turbine characteristics, wind correlation and generator reactive limits, Electric Power Systems Research, Volume 170, 2019, Pages 101-115, ISSN 0378-7796, https://doi.org/10.1016/j.epsr.2019.01.018.

Rajat Kanti Samal, M. Tripathy, A novel distance metric for evaluating impact of wind integration on power systems, Renewable Energy, Volume 140, 2019, Pages 722-736, ISSN 0960-1481, https://doi.org/10.1016/j.renene.2019.03.094.

S. Sarangi, N. P. Rath and H. K. Sahoo, "A Comparative Study of Filters for Denoising Mammograms," 2021 International Conference on Intelligent Technologies (CONIT), Hubli, India, 2021, pp. 1-5, doi: 10.1109/CONIT51480.2021.9498526.

R. N. Patro, H. K. Sahoo and P. K. Biswal, "Dual Histogram Based RVIN detector and Hybrid Gaussian Filter," 2021 IEEE 4th International Conference on Computing, Power and Communication Technologies (GUCON), Kuala Lumpur, Malaysia, 2021, pp. 1-8, doi: 10.1109/GUCON50781.2021.9573672

H.K.Sahoo et al., "INGR Roadmap Massive MIMO Chapter," 2022 IEEE Future Networks World Forum (FNWF), Montreal, QC, Canada, 2022, pp. 1-51, doi: 10.1109/FNWF55208.2022.00138

H. K.Sahoo et al., "INGR Roadmap Massive MIMO Chapter," 2023 IEEE Future Networks World Forum (FNWF), Baltimore, MD, USA, 2023, pp. 1-70, doi: 10.1109/FNWF58287.2023.10520592.

L. Ghadei and H. K. Sahoo, "BER Performance Analysis For Outdoor Wireless Channels Using Low Complexity Neural Equalizer," 2024 IEEE 3rd International Conference on Control, Instrumentation, Energy & Communication (CIEC), Kolkata, India, 2024, pp. 367-371, doi: 10.1109/CIEC59440.2024.10468249

Umamani Subudhi, Harish Kumar Sahoo, "Adaptive estimation of sequence components for three-phase unbalanced system using fractional LMS/F algorithm" , Springer Electrical Engineering, Volume 104, pages 1757–1768, 2022

Swetaleena Sahoo, Harish Kumar Sahoo, Sarita Nanda, "Energy efficient equalizer design for MIMO OFDM communication systems using improved split complex extreme learning machine", Springer Signal, Image and Video Processing,Volume 16, pp. 349–357, 2022

Madhusmita Sahoo, Harish Kumar Sahoo, "Performance Analysis of 5 G Wireless Hybrid Precoding Using Evolutionary Algorithms", Springer Journal of Bionic Engineering, Volume 20, pp. 2317–2330, 2023

Swetaleena Sahoo, Manidipa Sarkar, Harish Kumar Sahoo & Sarita Nanda, "Multiuser hybrid precoder design using logarithmic hyperbolic filtering for millimeter wave communication systems", Volume 30, pp.139–150, 2024

Madhusmita Sahoo, Harish Kumar Sahoo, "Optimal multiuser uplink data detection for 5G communication networks", Springer International Journal of Information Technology, Volume 16, pp. 1407–1418, 2024

PK Ray, HK Sahoo, A Mohanty, J khan Bhutto, ABA Barnawi, AA Alshaya, "Robust H-infinity Filter and PSO-SVM Based Monitoring of Power Quality Disturbances system" IEEE Access, DOI: 10.1109/ACCESS.2024.3367727

S.Sarangi,N.P. Rath, H.K.Sahoo, "Mammogram Mass Segmentation and Detection using Legendre Neural Network based Optimal Threshold" Accepted in Springer Medical & Biological Engineering & Computing, 2021

Patro, R. N., Subudhi, S., Biswal, P. K., Dell’Acqua, F., & Sahoo, H. K. (2021). Error removal by energy scaling from hyperspectral images for performance improvement of spectral classifiers. International Journal of Remote Sensing, 42(20), 7863–7879. https://doi.org/10.1080/01431161.2021.1966851

B. Mohanty, H.K.Sahoo, â€œEfficient Beamformer for Low Mobility Indoor Communication Using Sparse Adaptive Algorithmâ€, Springer Wireless Personal Communications,vol.116, issue 5 pages1621â€“1637,2021, 10.1007/s11277-020-07752-x

B. Mohanty, H.K.Sahoo, B.Patnaik, â€œWireless channel estimation and beamforming by using block sparse adaptive filteringâ€, Springer Signal, Image and Video Processing, 2020,https://doi.org/10.1007/s11760-020-01795-0

Ram Narayan Patro, Subhashree Subudhi, Pradyut Kumar Biswal, FabioDellâ€™Acqua , Harish Kumar Sahoo, "Conditional nearest regularized subspace classifiers: a fast classification approach for HSI" International Journal of Remote Sensing(Taylor and Francis), vol. 40, issue 24,2019, https://doi.org/10.1080/01431161.2019.1629717

B.Mohanty,Harish K. Sahoo, and B.Patnaik, "Block NLMS/F Equalizer Design and Channel Capacity Analysis for Indoor IEEE 802.11 Fading Wireless Channels", Springer Signal, Image and Video Processing, vol.13,pp. 693-701, 2019, DOI: 10.1007/s11760-018-1398-2

Harish K. Sahoo, B.Mohanty and B.Patnaik, "Block and Fast Block Sparse Adaptive Filtering for Outdoor Wireless Channel Estimation and Equalization", Springer Wireless Personal Communications,vol. 98,issue 3, pp.3003-3019, 2018

U.Subudhi , Harish K. Sahoo and Sajeev K. Mishra, â€œHarmonics and Decaying DC Estimation Using Volterra LMS/F Algorithmâ€ IEEE Transactions on Industry Applications,vol. 54,issue 2, pp.1108-1118, Mar-Apr 2018

U.Subudhi , Harish K. Sahoo and Sajeev K. Mishra, " Tracking of power quality disturbances using sparse modelâ€“based extended Kalman filters", International Journal of Adaptive Control and Signal Processing(Wiley), vol. 32,issue 10, pp. 1489-1507, Oct. 2018

H.K. Sahoo and P.K. Dash, â€œTracking of non-stationary distorted power signals using complex Hâˆž filterâ€, Inderscience International Journal of Automation and Control, vol. 5,pp. 22-43,2011

H.K. Sahoo ,P.K. Dash and N.P. Rath, â€œFrequency estimation of distorted non-stationary signals using complex Hâˆž filterâ€, Elsevier, International Journal of Electronics and Communications, vol. 66,pp.267-274,2012

H.K. Sahoo, P.K. Dash and N.P. Rath, â€œNARX model based nonlinear dynamic system identification using low complexity neural networks and robust Hâˆž filterâ€ Elsevier Applied Soft Computing, vol. 13, pp.3324-3334, 2013

Harish K. Sahoo and P.K. Dash, â€œRobust Estimation of Power quality disturbances using unscented Hâˆž filterâ€, Elsevier International journal of Electrical Power & Energy Systems, vol. 73, pp.438-447, 2015

S. Sarangi, N. P. Rath and H. K. Sahoo, "A Comparative Study of Filters for Denoising Mammograms," 2021 International Conference on Intelligent Technologies (CONIT), Hubli, India, 2021, pp. 1-5, doi: 10.1109/CONIT51480.2021.9498526.

R. N. Patro, H. K. Sahoo and P. K. Biswal, "Dual Histogram Based RVIN detector and Hybrid Gaussian Filter," 2021 IEEE 4th International Conference on Computing, Power and Communication Technologies (GUCON), Kuala Lumpur, Malaysia, 2021, pp. 1-8, doi: 10.1109/GUCON50781.2021.9573672

H.K.Sahoo et al., "INGR Roadmap Massive MIMO Chapter," 2022 IEEE Future Networks World Forum (FNWF), Montreal, QC, Canada, 2022, pp. 1-51, doi: 10.1109/FNWF55208.2022.00138

H. K.Sahoo et al., "INGR Roadmap Massive MIMO Chapter," 2023 IEEE Future Networks World Forum (FNWF), Baltimore, MD, USA, 2023, pp. 1-70, doi: 10.1109/FNWF58287.2023.10520592.

L. Ghadei and H. K. Sahoo, "BER Performance Analysis For Outdoor Wireless Channels Using Low Complexity Neural Equalizer," 2024 IEEE 3rd International Conference on Control, Instrumentation, Energy & Communication (CIEC), Kolkata, India, 2024, pp. 367-371, doi: 10.1109/CIEC59440.2024.10468249

Umamani Subudhi, Harish Kumar Sahoo, "Adaptive estimation of sequence components for three-phase unbalanced system using fractional LMS/F algorithm" , Springer Electrical Engineering, Volume 104, pages 1757–1768, 2022

Swetaleena Sahoo, Harish Kumar Sahoo, Sarita Nanda, "Energy efficient equalizer design for MIMO OFDM communication systems using improved split complex extreme learning machine", Springer Signal, Image and Video Processing,Volume 16, pp. 349–357, 2022

Madhusmita Sahoo, Harish Kumar Sahoo, "Performance Analysis of 5 G Wireless Hybrid Precoding Using Evolutionary Algorithms", Springer Journal of Bionic Engineering, Volume 20, pp. 2317–2330, 2023

Swetaleena Sahoo, Manidipa Sarkar, Harish Kumar Sahoo & Sarita Nanda, "Multiuser hybrid precoder design using logarithmic hyperbolic filtering for millimeter wave communication systems", Volume 30, pp.139–150, 2024

Madhusmita Sahoo, Harish Kumar Sahoo, "Optimal multiuser uplink data detection for 5G communication networks", Springer International Journal of Information Technology, Volume 16, pp. 1407–1418, 2024

PK Ray, HK Sahoo, A Mohanty, J khan Bhutto, ABA Barnawi, AA Alshaya, "Robust H-infinity Filter and PSO-SVM Based Monitoring of Power Quality Disturbances system" IEEE Access, DOI: 10.1109/ACCESS.2024.3367727

S.Sarangi,N.P. Rath, H.K.Sahoo, "Mammogram Mass Segmentation and Detection using Legendre Neural Network based Optimal Threshold" Accepted in Springer Medical & Biological Engineering & Computing, 2021

Patro, R. N., Subudhi, S., Biswal, P. K., Dell’Acqua, F., & Sahoo, H. K. (2021). Error removal by energy scaling from hyperspectral images for performance improvement of spectral classifiers. International Journal of Remote Sensing, 42(20), 7863–7879. https://doi.org/10.1080/01431161.2021.1966851

B. Mohanty, H.K.Sahoo, â€œEfficient Beamformer for Low Mobility Indoor Communication Using Sparse Adaptive Algorithmâ€, Springer Wireless Personal Communications,vol.116, issue 5 pages1621â€“1637,2021, 10.1007/s11277-020-07752-x

B. Mohanty, H.K.Sahoo, B.Patnaik, â€œWireless channel estimation and beamforming by using block sparse adaptive filteringâ€, Springer Signal, Image and Video Processing, 2020,https://doi.org/10.1007/s11760-020-01795-0

Ram Narayan Patro, Subhashree Subudhi, Pradyut Kumar Biswal, FabioDellâ€™Acqua , Harish Kumar Sahoo, "Conditional nearest regularized subspace classifiers: a fast classification approach for HSI" International Journal of Remote Sensing(Taylor and Francis), vol. 40, issue 24,2019, https://doi.org/10.1080/01431161.2019.1629717

B.Mohanty,Harish K. Sahoo, and B.Patnaik, "Block NLMS/F Equalizer Design and Channel Capacity Analysis for Indoor IEEE 802.11 Fading Wireless Channels", Springer Signal, Image and Video Processing, vol.13,pp. 693-701, 2019, DOI: 10.1007/s11760-018-1398-2

Harish K. Sahoo, B.Mohanty and B.Patnaik, "Block and Fast Block Sparse Adaptive Filtering for Outdoor Wireless Channel Estimation and Equalization", Springer Wireless Personal Communications,vol. 98,issue 3, pp.3003-3019, 2018

U.Subudhi , Harish K. Sahoo and Sajeev K. Mishra, â€œHarmonics and Decaying DC Estimation Using Volterra LMS/F Algorithmâ€ IEEE Transactions on Industry Applications,vol. 54,issue 2, pp.1108-1118, Mar-Apr 2018

U.Subudhi , Harish K. Sahoo and Sajeev K. Mishra, " Tracking of power quality disturbances using sparse modelâ€“based extended Kalman filters", International Journal of Adaptive Control and Signal Processing(Wiley), vol. 32,issue 10, pp. 1489-1507, Oct. 2018

H.K. Sahoo and P.K. Dash, â€œTracking of non-stationary distorted power signals using complex Hâˆž filterâ€, Inderscience International Journal of Automation and Control, vol. 5,pp. 22-43,2011

H.K. Sahoo ,P.K. Dash and N.P. Rath, â€œFrequency estimation of distorted non-stationary signals using complex Hâˆž filterâ€, Elsevier, International Journal of Electronics and Communications, vol. 66,pp.267-274,2012

H.K. Sahoo, P.K. Dash and N.P. Rath, â€œNARX model based nonlinear dynamic system identification using low complexity neural networks and robust Hâˆž filterâ€ Elsevier Applied Soft Computing, vol. 13, pp.3324-3334, 2013

Harish K. Sahoo and P.K. Dash, â€œRobust Estimation of Power quality disturbances using unscented Hâˆž filterâ€, Elsevier International journal of Electrical Power & Energy Systems, vol. 73, pp.438-447, 2015

ବୀର ସୁରେନ୍ଦ୍ର ସାଏ ବୈଷୟିକ ବିଶ୍ୱବିଦ୍ୟାଳୟ

वीर सुरेंद्र साई प्रौद्योगिकी विश्वविद्यालय

Veer Surendra Sai University of Technology

Publications

ବୀର ସୁରେନ୍ଦ୍ର ସାଏ ବୈଷୟିକ ବିଶ୍ୱବିଦ୍ୟାଳୟ

वीर सुरेंद्र साई प्रौद्योगिकी विश्वविद्यालय

Veer Surendra Sai University of Technology